Error: "There was an error downloading (add-on name here)" from the Add-ons Manager tab.

Been trying to install Add-ons but I keep getting that error message, even on the Add-ons website still cant install nothing not even update my currently existing add-ons. Already tried on 3 systems and still the same problem, 2 of them with freshly installed Firefox 12, no previous version installed on the system. Any suggestions or updates soon about this issue?
It also happened with Firefox 11 when the update to Firefox 12 was available.

what kind of network are you on - is it a corporate environment where the download & installation of extension files could be prohibited? you can also try installing an addon with your security software totally disabled once...

Similar Messages

Ipad ios 4.2 update error - "there was a problem downloading the software..

Hi All -
Super excited to get 4.2.1 up and running. I had the buggy beta of 4.2 running on my iPad but now when I try to restore my iPad to get the most recent version of 4.2.1 running, I get this error:
"There was a problem downloading the software for the iPad. The requested resource was not found.
I've restarted iTunes and the computer and I'm still getting the same error. I've looked for the .ipsw file online but can't seem to find it anywhere. It's not an Apple's Support/Downloads section either.
Anyone know where to download the new update? I'm dying without Airplay, Airprint and so on not working here.
Thanks!
CH

Hi,
this should have been addressed by Apple I guess, but luckily we found out the solution in the company. Yesterday all our iPads (with 4.2 beta iOS for dev) stopped working, displayed the Connect to iTunes scrren and throw errors when trying to sync like 'The requested resource was not found' (when tried to Restore) and Error Code: 0xE800005D (when iTunes first just tried to reinstall apps).
Here is what we did to reanimate all four iPads in the company:
First you need to enter Recovery mode with the iPad, then recover the iOS software (probably the latest). Here is how to do it:
1) Fire up iTunes on your computer, and plug in the USB cable in the computer, but not in the iPad!
2) Do a hard reset, ie. press and hold down Sleep/Wake and Home buttons simultaneously, don't bother with the switch off prompt, just keep pushing the buttons.
3) When the screen goes blank, but before the Apple logo comes up, release the Sleep/Wake button and quickly plug in the USB into the iPad too. Keep pushing the Home button, until the Recovery mode dialog in iTunes comes up.
4) Act according to the prompts, and wait for the image to download and extract (can be 10-15 minutes depending on your internet connection, the image is some 550Mb).
That's it, you can safely restore your apps and other content to your recovered iPad.
Hope this helps,
David

IPad update Error- There was a problem downloading the software for the iPad .... network settings

"iPad update Error- There was a problem downloading the software for the iPad X you do not have enough access privileges for this operation. Make sure your network settings are correct and your connection is active, or try again." is the error. The rest of iTunes, sycning, and ipad operations work. I am on OSX 10.6.8. iTunes is the most recent addition.
I've been having this problem for a while but it has yet to go away. Any help please?

OK. Good. The most likely culprit is either your firewall or anti-virus software. Temporarily disable both while you are doing the update (then, of course, turn them back on when you are done).

Itunes error there was a problem downloading 8275

I am running Windows Vista Business 32-bit on a fresh installation of Windows. I have reloaded iTunes 10 and updated my library from a backup I had on my server. I continue to recieve the following error when I try to download a new album that I purchased.
"There were problems downloading some purchased items.
For more information on the items that could not be downloaded, click below."
There was a problem downloading “Miss You / Some Girls (Deluxe Edition) / The Rolling Stones”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
There was a problem downloading “When the Whip Comes Down / Some Girls (Deluxe Edition) / The Rolling Stones”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
There was a problem downloading “Just My Imagination (Running Away With Me) / Some Girls (Deluxe Edition) / The Rolling Stones”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
There was a problem downloading “Some Girls / Some Girls (Deluxe Edition) / The Rolling Stones”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
There was a problem downloading “Lies / Some Girls (Deluxe Edition) / The Rolling Stones”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
There was a problem downloading “Far Away Eyes / Some Girls (Deluxe Edition) / The Rolling Stones”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
There was a problem downloading “Respectable / Some Girls (Deluxe Edition) / The Rolling Stones”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
There was a problem downloading “Before They Make Me Run / Some Girls (Deluxe Edition) / The Rolling Stones”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
There was a problem downloading “Beast of Burden / Some Girls (Deluxe Edition) / The Rolling Stones”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
There was a problem downloading “Shattered / Some Girls (Deluxe Edition) / The Rolling Stones”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
There was a problem downloading “Claudine / Some Girls (Deluxe Edition) / The Rolling Stones”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
There was a problem downloading “So Young / Some Girls (Deluxe Edition) / The Rolling Stones”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
There was a problem downloading “Do You Think I Really Care? / Some Girls (Deluxe Edition) / The Rolling Stones”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
There was a problem downloading “When You're Gone / Some Girls (Deluxe Edition) / The Rolling Stones”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
There was a problem downloading “No Spare Parts / Some Girls (Deluxe Edition) / The Rolling Stones”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
There was a problem downloading “Don't Be a Stranger / Some Girls (Deluxe Edition) / The Rolling Stones”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
There was a problem downloading “We Had It All / Some Girls (Deluxe Edition) / The Rolling Stones”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
There was a problem downloading “Tallahassee Lassie / Some Girls (Deluxe Edition) / The Rolling Stones”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
There was a problem downloading “I Love You Too Much / Some Girls (Deluxe Edition) / The Rolling Stones”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
Then after that message is cleared I get the following error about 10 seconds later...
I need HELP ASAP PLEASE!!!!!!!!

go to the homepage and clivk on your email. then just keep redowloading them until the error stops popping up. sounds dumb but it worked for me.

During CS5 master collection update, I get the error "There was an error downloading this update. Please quit and try again later." This has been happening for the past few days. Can someone help me getting my updates?

During CS5 master collection update on Windows 7, 64-bit laptop, I get the error "There was an error downloading this update. Please quit and try again later." This has been happening for the past few days. Can someone help me getting my updates?

Since CS5 is from 4+ years before the Cloud, this is not the right forum... but I don't really know a correct forum for that very old product
Have you tried to manually update the individual programs?
All updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/

HT201210 I keep getting the error "there was a problem downloading the software for the iPhone. The host is down?

I keep getting the error "there was a problem downloading the software for the iPhone. The host is down?

Thanks so much for your reply. In the meantime, everything else is working. I called Apple support and they were very unhelpful, wanted to charge me for support on a phone I'm trying to get rid of to upgrade to the iPhone 5, but, I can't get rid of it until I synch it to my computer.... Any suggestions to see what's blocking it?

"Message from Webpage (error) There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."

I created a site column at the root of my site and I have publishing turned on. I selected the Hyperlink with formatting and constraints for publishing.
I went to my subsite and added the column. The request was to have "Open in new tab" for their hyperlinks. I was able to get the column to be added and yesterday we added items without a problem.
The problem arose when, today, a user told me that he could not edit the hyperlink. He has modify / delete permissions on this list.
He would edit the item, in a custom list, and click on the address "click to add a new hyperlink" and then he would get the error below after succesfully putting in the Selected URL (http://www.xxxxxx.com), Open
Link in New Window checkbox, the Display Text, and Tooltip:
"Message from Webpage There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."
We are on IE 9.0.8.1112 x86, Windows 7 SP1 Enterprise Edition x64
The farm is running SharePoint 2010 SP2 Enterprise Edition August 2013 CU Mark 2, 14.0.7106.5002
and I saw in another post, below with someone who had a similar problem and the IISreset fixed it, as did this problem. I wonder if this is resolved in the latest updated CU of SharePoint, the April 2014 CU?
Summary from this link below: Comment out, below, in AssetPickers.js
//callbackThis.VerifyAnchorElement(HtmlElement, Config);
perform IISReset
This is referenced in the item below:
http://social.technet.microsoft.com/Forums/en-US/d51a3899-e8ea-475e-89e9-770db550c06e/message-from-webpage-error-there-was-an-error-in-the-browser-while-setting?forum=sharepointgeneralprevious
TThThis is possibly the same information that I saw, possibly from the above link as reference.
http://seanshares.com/post/69022029652/having-problems-with-sharepoint-publishing-links-after
Again, if I update my SharePoint 2010 farm to April 2014 CU is this going to resolve the issue I have?
I don't mind changing the JS file, however I'd like to know / see if there is anything official regarding this instead of my having to change files.
Thank you!
Matt

We had the same issue after applying the SP2 & August CU. we open the case with MSFT and get the same resolution as you mentioned.
I blog about this issue and having the office reference.
Later MSFT release the Hotfix for this on December 10, 2013 which i am 100% positive should be part of future CUs.
So if you apply the April CU then you will be fine.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

I just got the following message fro Adobe when I try to update: "Error There was an error with this action. Try again later. 3cde7ed8-ce06-45ae-8fa8-58cc80a9d1ec"

I just got the following message fro Adobe when I try to update: "Error There was an error with this action. Try again later. 3cde7ed8-ce06-45ae-8fa8-58cc80a9d1ec"

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library "~/Pictures/Family IIi.aplibrary". Please help, thanks

I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library “~/Pictures/Family IIi.aplibrary”. Please help, thanks

Are all three libraries under your account or are they in different accounts? Any other errros on the system?
Start by doing the permission repair and library repair steps in Aperture 3: Troubleshooting Basics

I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later. 7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.

I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later. 7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.

AppTrial1 where are you seeing this error exactly? For information on how to install the Adobe Creative applications included with the Creative Cloud please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

I am trying to listen BBC radio news from BBC App, but on pressing the button I always get the error "there was an error playing this radio feed". What is the source of this error and how can I remove it?

I am trying to listen BBC radio news from BBC App, but on pressing the button "live radio" I always get the error "there was an error playing this radio feed". What is the source of this error and how can I remove it?

That is probably just a generic error message and you might not ever know what is causing it. Assuming that you have been able to play live radio with the app in the past (I know nothing about the app) and assuming that all other Internet related functions (Safari, email, etc.) are working properly on your iPad, quit the app completely and reboot your iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that fails to resolve the issue, you might want to reboot your router, unplug it for about 30 seconds and then plug it in again.

Publish error There was an error communicating with the FTP server. Try again later, or check with your service provider.

OK! So I got everything filled out right to publish my iWeb site with iCloud now but after it looks like everything is fine this error pops up REPEATLY!:
PUBLISH ERROR There was an error communicating with the FTP server. Try again later, or check with your service provider.
Is this an Apple problem or with my server Netfirms???

Yeah no sorry not the answer. I have my own online hosting unlimited space and bandwidth.
It seems to be linked to teh podcast image. It's very strange...

After Effects error: There was an error processing the PDF document.

I have been struggling with this problem ever since CS4 was installed.
I have the CS4 Mac Master Collection.
I am using Illustrator to create text for animation in After Effects.
I can create text in Illustrator and import it into After Effects fine. But when I go to make a change to
the Illustrator file, even as simple as changing a color, I get this error.
After Effects error: There was an error processing the PDF document. The file may be damaged or corrupt. (50::29)
The Illustrator file is then toast as far as After Effects is concerned. It cannot be opened or reimported.
I have to start over again and over again, rebuilding the Illustrator file each time.
HELP!!!

This is an issue with AI and ultimately therefore also the AI routines that AE shares to access such files. Has been there forever and neither the AI people nor the AE team seem to be able to fix it in a consistent manner. Simply save a copy of the file from AI, then use Replace Footage instead of reload or at least always fully reload the AE project.
Mylenium

Publish Error: There was an error updating .Mac

Hello,
This is the first time I have had any problems with iWeb when trying to publish a site. After the site and pages are created, I keep getting the error:
"Publish Error: There was an error updating .Mac".
- I have iWeb 1.1.2
- I am not over quota.
- My account is not expired.
- I've tried multiple times over a 1.5h period.
- I've tried closing/restarting iWeb, rebooting my machine, and manually deleting all files in my .Mac/Web/iWeb folder in case any got corrupted somehow.
- I've emailed tech support about this too.
Hopefully this is just a server issue on Apple's side and is temporary. Anybody experience problems around today?
Cheers.
MacBook Mac OS X (10.4.9)

Okay I am very relieved to hear that people out there are experiencing what seems to be the exact same issue (and that I don't have to suffer through Apple support). I as well, after experiecing this issue, was totally unable to login to my website (password kept getting rejected).
As of right now - 12h after first experiencing this issue - I still cannot publish to iWeb.
When trying what was suggested earlier, a lowercase login, I received a new and more interesting error message:
Publish Error: An error occurred while publishing file “navbarseparator3.png.” Try choosing File > Publish All.
I then tried to "Publish All" and viola - it worked! What is fascinating to me is that I have used the same login/password for a year now with no problems and how a single capital letter in a login can cause so much grief. Hmm. Anyways, thank you Mr. Apnewbie for your suggestion.
I think .Mac is a superb service - however for the price, there are still some very fundamental kinks that it seems they didn't throughouly test out at Apple before charging people/releasing their software. Mainly, all the kinks related to multiple passwords with multiple web sites (and obviously logins!).
Mac OS X (10.4.9)
I'm marking this as "solved" (though why we all mysteriously had the same odd experience at the same time is yet unresolved. The solution suggested above has worked for me. Please try and comment here if it works for you too. I hope it does.
Mac OS X (10.4.9)

Error: "There was an error downloading (add-on name here)" from the Add-ons Manager tab.

Similar Messages

Maybe you are looking for