Error : TIME_OUT

hi,
thanks in advance,
i am using simple abap program to fetch the data from different tables with ineer joins.
i am storing that data into internal table.
but when i am executing the program i am getting error
Runtime Errors : TIME_OUT.
Short Text
Time Limit Exceeded
any solution on such problem?

Hi,
TIME_OUT errors will occurs, as maximum permitted time for execution of report might be reached. basically the time in secondds like 900,1800,2700 seconds will be given the programs and will be set by Basis team.
Try to execute the program in Background.After giving all selection screen values, Goto Program-->Execute in background option.
Give necessary print parameters and format for output and schedule with Immediate option. Now goto SM37 and check your batch job for the spool.
Even after program has not finished means, you may to do performance tuning for your SELECT statements..
REgards,
Ashok

Similar Messages

Runtime Errors TIME_OUT

guyz,
i am facing the below issue while running DTP to load the master data attr to info object.
previoulsy it was working perfect but from last few days its getting hanged and throwing this error.
also records are very few around 2500.
dont know why its getting hanged.
Runtime Errors         TIME_OUT
Date and Time          10/04/2011 16:35:09
Short text
     Time limit exceeded.
What happened?
     The program "SAPLSENA" has exceeded the maximum permitted runtime without
     interruption and has therefore been terminated.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     After a specific time, the program is terminated to make the work area
     available to other users who may be waiting.
     This is to prevent a work area being blocked unnecessarily long by, for
     example:
     - Endless loops (DO, WHILE, ...),
     - Database accesses with a large result set
     - Database accesses without a suitable index (full table scan)
     The maximum runtime of a program is limited by the system profile
     parameter "rdisp/max_wprun_time". The current setting is 600 seconds. If this
      time limit is
     exceeded, the system attempts to cancel any running SQL statement or
     signals the ABAP processor to stop the running program. Then the system
     waits another 60 seconds maximum. If the program is then still active,
     the work process is restarted.
How to correct the error
    Programs with long runtime should generally be started as background
    jobs. If this is not possible, you can increase the system profile
    parameter "rdisp/max_wprun_time".
    Depending on the cause of the error, you may have to take one of the
    following measures:
    - Endless loop: Correct program;
    - Dataset resulting from database access is too large:
      Instead of "SELECT * ... ENDSELECT", use "SELECT * INTO internal table
      (for example);
    - Database has unsuitable index: Check index generation.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "TIME_OUT" " "
    "SAPLSENA" or "LSENAF01"
    "FLUSH_PACKAGE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
also sometimes when i try to refresh the requests in the manage option of the info object, it doesnt show the previous requests and throws the message
Refresh of the display terminated because InfoCube/DSO cannot be locked
Message no. RSM854
Diagnosis
InfoProvider 0PROD_CATEG cannot be locked with lock argument RSICCONT.
System Response
The display is not refreshed and contains old or incorrect data, that can come from other InfoProviders.
Procedure
Check why the sm12 lock is not yet released on the table RSICCONT; Where necessary delete the lock.
With reproduction of an unauthorized lock, write a message to SAP.
please guide.
cheerz,
raps.

Dear Raps,
The program SAPLSENA is the lock handler tool. It is doing
enqueue/dequeue operations.
The error should come from the program created running in this dialog
process and calls the SAPLSENA program to create the lock.
The problem actually occurs because an application program commits many
separate calls of DEQUEUE function modules, and thus causes the
dispatcher queue in the enqueue dispatcher to overflow. Such an
application program always causes a performance problem. DEQUEUE calls
are started asynchronously, that is, they normally do not give a
response, and the calling program continues without waiting time.
If an overflow of the ENQ dispatcher queue occurs in this case, locks
are kept forever, and processes that are waiting for an enqueue
response, will keep hanging.
Please kindly refer to some notes for more information.
653996     Analyzing lock situations
142054     Processes in status stopped ENQ
97760      Enqueue: Performance and resource consuption
74141      Resource Management for tRFC and aRFC
39412      How many work processes to configure
Please check as well attached note 74141 for RFC load distribution.
Regards,
arvind

Display Infocube Content produces Runtime Errors = TIME_OUT

Hi,
Upon trying to display content of an InfoCube (200 records only), I received the following error:
Runtime Errors         TIME_OUT
Date and Time          13.12.2007 11:16:24
Short text
Time limit exceeded.
What happened?
     The program "CL_SQL_RESULT_SET=============CP" has exceeded the maximum
      permitted runtime without
     interruption and has therefore been terminated.
Error analysis
     After a specific time, the program is terminated to make the work area
     available to other users who may be waiting.
     This is to prevent a work area being blocked unnecessarily long by, for
     example:
     - Endless loops (DO, WHILE, ...),
     - Database accesses with a large result set
     - Database accesses without a suitable index (full table scan)
The maximum runtime of a program is limited by the system profile
     parameter "rdisp/max_wprun_time". The current setting is 600 seconds. If this
      time limit is
     exceeded, the system attempts to cancel any running SQL statement or
     signals the ABAP processor to stop the running program. Then the system
     waits another 60 seconds maximum. If the program is then still active,
     the work process is restarted.
Trigger Location of Runtime Error
    Program                                 CL_SQL_RESULT_SET=============CP
    Include                                 CL_SQL_RESULT_SET=============CM006
    Row                                     32
    Module type                             (METHOD)
    Module Name                             NEXT_PACKAGE
Source Code Extract
Line SourceCde
2 *
    3 * Fetches the next bulk of rows into an internal table.
    4 *
    5
    6   DATA:
    7     sql_code       TYPE i,
    8     sql_msg        TYPE dbsqlmsg.
    9
   10   FIELD-SYMBOLS:
   11     <line> TYPE ANY,
   12     <outtab> TYPE STANDARD TABLE.
   13
   14
   15   IF me->cursor = c_invalid_cursor.
   16 *   result set has already been closed
   17     RAISE EXCEPTION TYPE cx_sql_exception
   18       EXPORTING invalid_cursor = 'X'.
   19   ENDIF.
   20
   21 * check that a reference to the output table has been set by
      22 * a preceeding call of SET_PARAM_TABLE; in this case the attribute
   23 * LINE_REF contains a reference to a data structure of the
   24 * table's line type
   25   IF me->itab_ref IS INITIAL.
   26     RAISE EXCEPTION TYPE cx_parameter_invalid
   27           EXPORTING parameter = 'ITAB_REF'.
   28   ENDIF.
   29   ASSIGN me->itab_line_ref->* TO <line>.
   30   ASSIGN me->itab_ref->* TO <outtab>.
   31
>>>>>   CALL 'C_DB_FUNCTION' ID 'FUNCTION' FIELD 'DB_SQL'
   33                        ID 'FCODE'    FIELD c_fcode_next_package
   34                        ID 'CONNAME' FIELD me->con_ref->con_name
   35                        ID 'CONDA'    FIELD me->con_ref->con_da
   36                        ID 'CURSOR'   FIELD me->cursor
   37                        ID 'BOUND'    FIELD me->outvals_bound
   38                        ID 'OUTVALS' FIELD me->parameters->param_tab
   39                        ID 'OUTTAB'   FIELD <outtab>
   40                        ID 'LINE'     FIELD <line>
   41                        ID 'UPTO'     FIELD upto
   42                        ID 'ROWCNT'   FIELD rows_ret
   43                        ID 'SQLCODE' FIELD sql_code
   44                        ID 'SQLMSG'   FIELD sql_msg.
   45
   46   IF sy-subrc = 0.
   47 *   some rows fetched
   48     ADD rows_ret TO rows_fetched.
   49
   50 *   set the OUTVALS_BOUND flag; this avoids "reassignement" of the
   51 *   output variables the next time this method is called, i.e. the
Can someone help me to solve this problem. Thanks!

Hi,
Chk the below line from the dump in line 3 - 'Fetches the next bulk of rows into an internal table'
what that error means is the volume which u r trying to view is beyond the size of the internal table buffer and because of that it is leading to a dump.
As the previous reply suggests try to increase the size of table buffer which will help you display much larger volumes.
Selection of fewer columns would be much quicker and easier to analyse data quickly.
Regards

Transaction IA12:ABAP runtime errors:TIME_OUT

Hi,
We are executing transaction IA12.We are getting ABAP runtime errors:Time_Out.
We have searched for a SAP note to sort the issue:SAP Note 607086 - Functional location: Problems when displaying structure list.
Please suggest what will be the option to solve the issue.
Thanks.

Hi,
searching for the FORM routine where the timeout occurs ("mara_predecessor_f50") and excluding SAP notes that are modification notes or based on the implementation of modification notes, there is only one remaining note
Note 658930 - Structure list: Configuration not considered with BOM
for 46C up to Support Package SAPKH46C46.
If this is still not in your system, the note may be a solution.
If not, I'm running out of good ideas. Then also the SAP modification notes can be your last option.
Regards,
Klaus

LSO_PSV2 - Create /w Resources freezing, ABAP runtime error, TIME_OUT

Hello Experts,
I have an individual user that is a part of a team that manages our LSO environment. He is experiencing a problem when performing a "Create with resources" on an instructor-led course.
After choosing this option his session just spins but never enters the course details screen as expected.
After anywhere from 15 - 30min the session returns an ABAP runtime error of "TIME_OUT". The error details state that the time out for ABAP programs is set to 3000sec (50min). The odd thing is that the program never reaches the 50 min marks but still throws the error.
The user is able to select the "create w/o resources" option and get to the next screen as expected.
I have run security traces (ST01) on his account and all looks fine (rc=0)
He is one of several people that executes this transaction but is the only user that is receiving this issue. The team is assigned to the same position and shares the same PD profile. They share the same security roles and the same ABAP program is being run.These users are a third party vendor that remote in via citrix desktop.
I have had our Basis team exam the ABAP runtime error and what is happening behind the scenes as this runs and they see no indication that the program is retrieving data even though it processes for a long time.
Obviously this is a complex issue, I have searched for two weeks with no success. Any thoughts, suggestions are more than welcome at this point as the user is unable to perform needed work functions.

Any solution on this one? I have the same problem with LSO_PSV2 :/

IDOC Runtime error TIME_OUT has occurred

Dears,
          We are having a Machine to Machine Order interface, where huge volume of order files are being sent to SAP from legacy system through XML files which PI interface converts as Inbound IDOCs.
The issue we are facing here is : when huge number of order files are sent the IDOCs are stuck in 51 status due to TIME_OUT error. This is mainly because of :
1. Huge volume of files
2. Size of files
which eventually leads to optimum consumption of system resources and thus leading to TIME OUT errors, where order files gets stuck under 51 status with TIME OUT errors.
Alternative solutions : During peak season we do re run the IDOCs when the system resources are up or not busy.
Let me know, are there any other approach which we can consdier other than below mentioned ones :
1. Batch jobs
2. Bang on for bigger app servers
Your inputs and suggestions are highly appreciated.
Regards
Chirag Gowda

Hi,
break this into two select queries......
use the below code to do the same....
data : begin of fs_afko
              aufnr type afko-aufnr,
              aufpl type afko-aufpl,
              reuck type afko-reuck,
        end of fs_afko.
data : Begin of fs_afpo,
            aufnr type afpo-aufnr,
           matnr type afpo-matnr,
        End of fs_afpo.
data : t_afko type table of fs_afko,
         t_afpo type table of fs_afpo.
SELECT aufnr aufpl rueck
INTO   TABLE t_afko
FROM   afko
WHERE afko~aufnr IN s_aufnr
AND    afko~dispo IN s_dispo.
SELECT afpo~matnr
INTO   TABLE t_afpo
FROM   afpo
FOR ALL ENTRIES IN t_afko
WHERE aufnr = t_afko-aufnr
AND    afpo~matnr IN s_matnr
AND    afpo~dwerk IN s_werks
AND    afpo~dauat IN s_auart.
loop at t_afko into fs_afko.
loop at t_afpo into fs_afpo where aufnr = fs_afko-aufnr.
    move-corresponding fs_afko to fs_temp_orders.
    move-corresponding fs_afpo to fs_temp_orders.
    append fs_temp_orders to it_temp_orders
endloop.
endloop.
Regards,
Siddarth

Run time error "Time_out'

Hi All,
we got run time error saying 'Time_out' at Modify statement.
The statement is
Modify zvbuk.
zvbuk is a data base table. this table consists of arround 4 crore records. till now we dint get the dump but from last two days we are getting dump please let me know wht could we can suggest the solution.
Regards,
kumar
Moderator Message: There are lots of available information regarding Performance Tuning of programs. Please search for them on the web.
ps: This happens to be a Duplicate question after getting the first one locked. Continued violation of the Rules will invite deletion of your id.
Edited by: kishan P on Sep 3, 2010 11:04 AM
Edited by: kishan P on Sep 3, 2010 11:06 AM

Hi Jolly,
To fill this internal table, I use the field MATNR( Material Number) and P_LFMON (Month or Period), then the program returns me some records with this criteria, with the same MATNR and P_LFMON, then, I have to sort the records "Ascending" to get que last month...
Then after get the last month I delete the others in this Internal Table, resting only one Material in each period. Did you understand ?

TIME_OUT error while executing a Z program

Hi,
We are executing a Z report based on the input field "Dispatched on" (Z date type)
which is resulting in a runtime error.We have already created Indexes for the table CRMD_ORDERADM_H and
CRMD_ORDER_INDEX.
Runtime Errors         TIME_OUT
Date and Time          20.07.2010 14:27:20
Short text
Time limit exceeded.
What happened?
The program "SAPLCRMBSVA" has exceeded the maximum permitted runtime without
|    interruption and has therefore been terminated.
Any suggestions?
Regards,
PP

Hi,
timeout time could be changed in a RZ11 profile parameter.
I´m not sure which one it is in your case.
Kind regards
Manfred

TIME_OUT error while trying to execute a report

Hi all,
When I try to exceute a Z report using a particular variant, it displays the output.
However, when another person tries to run the same Z report using the same variant, it gives a TIME_OUT error.
ABAP runtime errors TIME_OUT
Time limit exceeded.
Please let me know the reason for this.
Thanks and regards,
Anishur

Hi Anishur,
Is the TIME OUT occuring on the same client as you are running the report? And if so, does the user have the same authorisation as you? The TIME OUT will occur if the program is handling more data, if you are seeing different performance it will be down to the amount of data process.
As others have suggested, look at improving the performance of the report.
Regards,
Nick

TIME_OUT runtime error for Zreport in only Production server.

Hi Experts,
                 I have created one new Zreport which is working well in Development & Quality Server for given input. but same report is giving run time error in Production server for same input resulting into error TIME_OUT. Short text of error is Time limit exceeded.
                Please provide me solution for the same.
                Thanks in advance.
Best Regards,
Vinayak

Moderator message - Please see Please Read before Posting in the Performance and Tuning Forum before posting - post locked

Run time error in report for a particular month : " TIME_OUT"

hi frends, we have developed a report for PM module in SAP. it is a monthy report. and user have to enter the month for which he wants to see the report. we are facing runtime error for a particular oct. and nov month of 2009 only , all other months are working fine. The error is :
The program "ZPMR_EQUP_PERFORMANCE_REPORT" has exceeded the maximum permitted
runtime without
interruption and has therefore been terminated.
what could be the reason.

Hi Achalmehra,
By seeing the run time error "TIME_OUT", I suspect this is due to Performance issue.
There is a chance that they had huge data dump into PM server from other servers and there is also chance that
They have many records available for these 2 months.
IN any case, please chk with Run time analysis (SE30) by executing your program...
If it displays the graph more than 30 % for Database then it is an issue with the Performance.
Also chk with SQL trace.....
Second case :
Check you had not used Nested Loops, Select queries in Loop.
Make sure you use Binary search for Read Statements....
Third : Chk with the runtime error at which place of the code it is throwing Time_out error at Source code extract.
To help you further, please paste your code here and also paste the Run time error that you receive with the select queries.
Regards,
Kittu

TIME_OUT error in back ground

Hi All,
I have scheduled a program in background.But i am getting short dump as TIME_OUT.
I am getting the following dump.
Runtime Errors         TIME_OUT
       Occurred on     04.12.2008 at 06:11:26
Time limit exceeded.
What happened?
The program "SAPLZ_PTI_FILE" has exceeded the maximum permitted runtime without
interruption, and has therefore been terminated.
002430       WHEN 'WA_INSTALL-ANLAGE'.
002440         DATA: c_anlage(10) TYPE n.
002450         c_anlage = lw_sdata-symvalue.
     >         SELECT SINGLE aklasse FROM eanlh INTO p_aklasse   ---->dump occurs here
002470          WHERE anlage = c_anlage
002480          AND   bis = '99991231'.
002490
002500   *- Sluitveld geeft einde van te verwerken IDOC-data
002510       WHEN 'GV_EINDVELD'.
This code is executing inside a loop.
Anybody has the solution for this?
Please help me, in solving this problem.
Thnaks
Taj

Your Select statement has got nothing to do with the dump.
It is a TIME OUT dump which simply means that maximum allotted time was exceeded. Try to do some performance tuning on your report. Just walk through the report in debug mode to just check if it falling in some infinite loop. Or you could try to limit the amount of data being processed through your selection parameters.
If nothing above works. Request your basis to somehow increase the time limit further.
These are the only ways. Most importantly Do Performance Tuning. All The Best !
Try transaction se30. It will help.

Time out error

Dear All,
One of our production system and one of HR user got time out error while executing T-code PA30 , PA40 .
Note : we tried the transaction ( PA30 and PA40 ) in our user id ,it work smooth ,there is no issue with in my user id as well other HR user also .
Only the specific user facing time out error in Production server.
Note : while executing PA30 ,PA40 t-codes ,it takes long time to get initial screen itself finally got time out error (No issue with other SAP HR users) .
Pls check the below logs:
Runtime Error TIME_OUT
Occurred on 17.08.2011 at 08:59:00
Time limit exceeded.
What happened?
The program "SAPLRHAC" has exceeded the maximum permitted runtime without
interruption, and has therefore been terminated.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
After a certain length of time, the program is terminated. In the case
of a work area, this means that
- endless loops (DO, WHILE, ...),
- database accesses producing an excessively large result set,
Kindly advise ,is this related to any Authorization issue ???

Hi,
Please share SAP_BASIS/ SAP_HR release/patch level information of the affected SAP system.
I would suggest you to create New Temp SAP User id with exact copy of that affected SAP User ID and then try to access PA30/PA40 with that New SAP User id login into affected system. Check that, u are facing the same behavior/issue with that New Temp SAP User id ?
Regards,
Bhavik G. Shroff

Runtime error while opening stucture tab in Functional Location..

Dear All,
Whenever I'm trying to open the structure tab of functional location I'm getting the runtime error and the message is as follws..
Run time error TIME_OUT
Time Limit Exceeded
The program " SAPLIE01" has exceeded the maximum permitted runtime without interruption and has therefore been terminated
Error Analysis
After specific time,the program is terminated to make the work area available to other users who may be waiting
I did not understand the reason for it....
Any can throw light on this...
Thanks in Advance
Johnson

Dear
This problem is occuring due to your transactions has so many datas in output. So that system is providing the error. In each sap log in you can control the maximum idle hours at Option header menu at Main menu.
Else you get the Abaper+Basis for the help. There is no error in functional side for sort out.

Dump error while filling the Setup table

Hi All,
I am trying to fill the setup table.While filling the stup table for 2lis_03_BF datasource, i got the Dump error after some time. I have checked the data in Setup table and found 9000 records.
Shall i proceed further by pulling the data from R/3 to BW.I have checked the data in RSA3 and got some data.
Shall i schedule the data from BW side.
Pls help on this issue.
Thanks,
Siva.

Thanks Reddy and JS.
I have checked the TCODE SM37 and found no jobs are available. I have checked the TCODE : NPRT and found some logs.In this, it is not showing any errors.
I have checked in SM21 and found some errors.
Time_______________Text
17:08:10____________Transaction Canceled M2 630 ( )
17:23:47____________Run-time error "TIME_OUT" occurred
17:23:47____________> Short dump "090302 172347 sand1_W2 2_00 " generated
17:30:08____________Status: 80% of IL00.DAT is in use
17:30:17____________Status: 90% of IL00.DAT is in use
17:30:18____________Overflow of Paging File (032768 Blocks)
17:30:18____________Run-time error "MEMORY_NO_MORE_PAGING" occurred
17:30:19____________> Short dump "090302 173018 sand1_W2 2_00 " generated
Shall i execute filling the setup table again. Do i need to give termination time More ( 2 Hrs difference)
Any issue on refilling the setup table again.
Pls suggest.
Thanks,
Siva.

Error : TIME_OUT

Similar Messages

Maybe you are looking for