TIME_OUT error in back ground

Hi All,
I have scheduled a program in background.But i am getting short dump as TIME_OUT.
I am getting the following dump.
Runtime Errors         TIME_OUT
       Occurred on     04.12.2008 at 06:11:26
Time limit exceeded.
What happened?
The program "SAPLZ_PTI_FILE" has exceeded the maximum permitted runtime without
interruption, and has therefore been terminated.
002430       WHEN 'WA_INSTALL-ANLAGE'.
002440         DATA: c_anlage(10) TYPE n.
002450         c_anlage = lw_sdata-symvalue.
     >         SELECT SINGLE aklasse FROM eanlh INTO p_aklasse   ---->dump occurs here
002470          WHERE anlage = c_anlage
002480          AND   bis = '99991231'.
002490
002500   *- Sluitveld geeft einde van te verwerken IDOC-data
002510       WHEN 'GV_EINDVELD'.
This code is executing inside a loop.
Anybody has the solution for this?
Please help me, in solving this problem.
Thnaks
Taj

Your Select statement has got nothing to do with the dump.
It is a TIME OUT dump which simply means that maximum allotted time was exceeded. Try to do some performance tuning on your report. Just walk through the report in debug mode to just check if it falling in some infinite loop. Or you could try to limit the amount of data being processed through your selection parameters.
If nothing above works. Request your basis to somehow increase the time limit further.
These are the only ways. Most importantly Do Performance Tuning. All The Best !
Try transaction se30. It will help.

Similar Messages

Error in Back Ground processing of a report.

Hi All,
I have a report wherein I need to schedule it in background. Its an ALV report and it has got user defined GUI status. But for one of the selection options, only output is being displayed. Can this be scheduled in Back Ground?

Hi all,
Thanks for your reply.
I got the solution. When a program is scheduled in background, if it is written in classes and ALV grid display is used, we get this error. I am able to schedule when I change the function module to LIST_DISPLAY.

Error in Back ground job schedule for call transaction

Hi Experts ,
I have a Program which as Three BDC in it . 1 - to create contact person , 2- customer 3-sales order
Using call transaction if i run with all screens and no screens it's running fine..
if i schedule it background job
conact and customer works fine but sales order not works ..
can anyone give me the solution ?

Hi Phani and Pavan ,
It works Fine for Back ground anf fore ground i.e ( N and A ) sales order is created here .
but Sales order not created when i schedule it in back ground as
Program - execute in back ground .
sales not created when i schedule it in background job only using SM36 or Program - execute in back ground ?
Edited by: Pradeep Annaiah on Jan 13, 2009 5:29 AM

Reg: error in back ground job (Message no. CO051)

Hi,
We developed a custom program which creates Operative Projects along with WBS, activities, milestones etc using a standard template ie. copying from standard project template. When i run this custom program online, it generates operative project
successfully. But when we run this program background , the job gets cancelled giving the following error.
*The order/network type ZS02 is not defined*
*The order/network type ZS02 is not defined*The order/network type ZS02 is not defined
The order/network type ZS02 is not defined
Job cancelled
*Message no. CO051*
*Diagnosis*
*The order type/network type that you have entered is not defined for the transaction you wish to carry out.*
*Procedure*
*Enter an order type/network type that is valid for the transaction.*
Could anyone help me on this , is highly appreciable.
Thanks in advance
regards,
R.gopal

Srinivas,
Since you are running your program in background, I assume you have ensured that you are not reading from or writing to any file on the presentation server.
Presentation server is not accessible when you run your program in background.
Regards,
Shyam.

Run time error in Back ground processing using LSMW

Hi all,
We are runnig LSMW to create Positions using tcode PP03. We are able to create positions in the foreground but we are getting error "RAISE_EXCEPTION" in the Backgrond for the same LSMW.
Kindly suggest me suitable solution if any.
Thanks in advance,
Vasanth.

Hi all,
Thanks for your reply.
I got the solution. When a program is scheduled in background, if it is written in classes and ALV grid display is used, we get this error. I am able to schedule when I change the function module to LIST_DISPLAY.

ERROR IN BDC SESSION BACK GROUND ( USING PP03 T.CODE)

Hi Experts,
When i am executing the session ( pp03 T.Code) ,it is working fine in fore ground as well as in display errors mode. But it is not working in back ground mode.
it is raising the exception ( cntl-system-error).
I used flat file which is in the presentation server . I accessed it by gui_upload Function Module.
 I am also getting the error using data sets . After upload the presentation server data into one internal table .I sent it to application server using open data set ( transfer ) , after that i read the application server data using open dataset ( read )
into another internal table ( i declared with same structure of flat file ) .
But this time also it is giving same error ( runtime exception).
Please tell me how can i handle using datasets . Its Very urgentttttttt
Please any body help meee ( If any one worked on this (pp03 T.code) ) .
Send the code or Inform the full detailsss as soon as possibleeee
regards ,
dattu malge.

Hi,
Go to the transaction SM35 and select your session and then click the Process Button.
Here you select the Processing Mode as "Background".
It is not possible to execute the same session by more than one user at a same time.
RSBDCSUB is used to automate the processing of Batch input session.
Cheers,
Hakim

Error while activating ODS is not caught in the back ground job..

Hi All,
We have a back ground job to load data to ODS and to activate it..If there is any error while loading or activating the data, back ground job is going into loop instead of cancelling the job..As the job is going into loop we are unable to trace the error unless we cancel the job manually and checking it..We have switched off displaying any messages while doing the back ground job...also we can not set any time limit for the job as it always depends on the volume of the data.
My requirement is , back ground job must get cancelled if there is any error while loading the ODS..Can anybody suggest any idea on this..
Thanks for reading.
Umamaheswar kumar

Hi Uma,
A few hints for running and schedule and monitoring process chains:
- always schedule the process chain in tcode RSPC
- check the log in RSPC for error messages, or
- check BW monitor for the ODS concerned (tcode RSMO, tab Details)
if anything is not working fine, the status of the corresponding load will show you the errors, warnings ...
either in RSPC - log or RSMO.
hope it helps.
Regards,
Lilly

Report Back ground processing, error

Hi,
I tried to run my program in back ground. It is showing the following error. I'm just Pressing F9 and scheduling the job immediately. When i go and see the "own jobs " in SM36, it shows the "job cancelled". When i see the job log, it shows "Control Framework: Fatal error - GUI cannot be reached" and "ABAP/4 processor: RAISE_EXCEPTION". When i debug the job using JDBG transaction it runs smoothly and generates spool.
Can you provide some solutioons?

HI,
Is your report having some OOPS functionalities?
Are you making use of any container or ALV GRID object.
In that case it will not run in background and will give you this error.
Search in SCN. This has been discussed a lto of times.
There are several posts on how to avoid this.
Regards,
Ankur Parab

Error in BDC Back Ground Processing

Dear All,
I am facing problem on while executing BDC program. First i am executing in Foreground method there it displaying errors occured,
means it showing full discription or error.
But when i used Back ground processing its displayig the full error discription like "No posting object defined for 1230/ / / " here i need full error discription.
please do the need full.
Regrads,
Srinivas.

Hi
In background processing you cannot see the error message, for that you have to write logic for capturing messages.
Use 'Format_Message' function module so that you can get the complete message and then you can display that on the screen.
Hope it helps...

Submit Back ground job with error log

Hi Gurus
Can anyone help with Back ground job with error log. i want put all the error logs in to 1 internal table and submit the back ground .how can i do that .please help me

Hi reddy ,
i am not experienced this in real scenarion .. even though i would like to give my idea
Put your logic inside the FM and execute in in background task mode on your action button .
call function 'Function module name' in background task
exporting
parameter =
importing
ret =
refer the below link for more detail on executing FM as background task
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/8f/53b67ad30be445b0ccc968d69bc6ff/frameset.htm
Regards
Chinnaiya P

Session method back ground error

Hi All,
I am doing BDC for XK01 transaction it's giving error when we run the session in back ground but the same is running fine in the foreground? is there any parameter we have to pass for bdc session fun module when we run back ground?
Thanks&Regards
mahesh

Hi..,
If u r populating data from presentation server file,u will get a dump obviously..
becoz it will not have any contact with presentation server while running in back ground.
To make it run successfully, First store the file on Application server.. then onli it will work...
To store a file in application server u need to use OPEN DATASET and CLOSE DATA SET....
reward all helpful answer..
aruna.

Error while using Back ground Job for Planning function in BPS

I have created FM and Program for scdualing Back ground Job for Planning function.
I have created Planning function with exit option and passed parameter Global seqence name.
Error is lot of Jobs are creating while exe in BPS0
Kindly help me the same
Regards
GR

Hi Rama,
It seems there are two diff. functional modules (UPC_BUNDLE_EXECUTE AND UPC_BUNDLE_EXECUTE_STEP). The second one divides the planning sequesces on the basis of something you specify (e.g. company code). Just make sure that you are using correct FM.
just a thought.......
Regards,
SK

Any restictions on back ground job when submit the session?

Hello friends
below is my code part. problem is when i execute this program in back ground the data is not picking from APQI. but in fore ground it is picking . for this SESSION submission in back ground am i missing any thing here. please suggest me , any restiction is their in back ground? if possible please send a sample code to submit SESSION automatically in background.
    SUBMIT rsbdcsub AND RETURN
                    USER sy-uname
                    WITH mappe    = p_group
                    WITH von      = sy-datum
                    WITH bis      = sy-datum
                    WITH z_verarb = 'X' .
      SELECT userid credate groupid qstate FROM apqi
         INTO TABLE it_apqi
         WHERE userid = sy-uname
         AND   credate = sy-datum
         AND   groupid = p_group
         AND   qstate = 'E'.              "Only look for 'Error' status
   DESCRIBE TABLE it_apqi[] LINES temp.

Codes for Submitting the session through RSBDCSUB (via Job)...
" The function module JOB_OPEN is called to create the job.
    call function 'JOB_OPEN'
         exporting
              delanfrep        = 'X' "Delete job after execution
              jobname        = fv_jobname "Job name
         importing
              jobcount         = fv_jobcount "Internally generated
         exceptions
              cant_create_job = 1
              invalid_job_data = 2
              jobname_missing = 3
              others           = 4.
    if sy-subrc = 0.
      submit rsbdcsub
             with       mappe = v_filec
             with            von = sy-datum      "From
             with            bis = sy-datum      "To
             with     z_verarb = 'X'
             with         fehler = ' '
             with      batchsys = space
             with         logall = ' '
             via job          fv_jobname
                  number       fv_jobcount
             and return.
      call function 'JOB_CLOSE'
           exporting
                jobcount             = fv_jobcount
                jobname              = fv_jobname
                strtimmed            = 'X'
           exceptions
                cant_start_immediate = 1
                invalid_startdate    = 2
                jobname_missing      = 3
                job_close_failed     = 4
                job_nosteps          = 5
                job_notex            = 6
                lock_failed          = 7
                others               = 8.
Hope this helps!
Edited by: Vin on Jun 4, 2009 10:58 AM

BAPI_DOCUMENT_CREATE2 - Document upload to DMS - Back ground

Hi,
We are trying to uploda a file into DMS(CV01N) from SAP R/3, BAPI 'BAPI_DOCUMENT_CREATE2'. This works fine in foregroung but when we ececute it in background, we get an error saying 'Error while checking in and storing'.
Could anyone please suggest me if we can sucessfully execute in back ground mode?
Thanks,
Ranjith Singh.

it is not possible to download in background to a presentation server (your local PC) hence it is not possbile to upload either.
when you submit the program to the background thenthe session is no longer attached to the PC that created it.
Because of this you have to go via the application server.
compare hundred of threads by searcing the ABAP forum with keywords +download +background
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0901cba-f49e-2910-748c-d7ce4c0c4c1c

Back ground job

Hi Experts,
See the following code.
When i run this program in fore ground it is giving time out error.Current running time is 600 Sec.When i run in Back ground with Immediate.Excute option after some time the job is cancled.When i see the job log It is mentioned as "More memory space requested".
Can any body Plz go thru the code and tell me what is the problem?
*& Report ZTEST_XML
REPORT ZTEST_XML.
*data: ifile like salfldir occurs 0 with header line.
data:p_path TYPE rsmrgstr-path value 'F:\usr\sap\CD5\serena\OCOS\'.
data: p_file type string.
TYPES: BEGIN OF t_xml_line, "Structure for holding XML data
data(256) TYPE x,
END OF t_xml_line.
data: BEGIN OF t_xml occurs 0,
rec TYPE x,
END OF t_xml.
data: begin of jtab occurs 0,
 text type string,
 end of jtab.
DATA: l_xml_table TYPE TABLE OF t_xml_line. " XML Table of the structure
data: wa(256) type x.
data: wa_xml like l_xml_table occurs 0.
data: l_str type string.
data: start_line type i,
 end_line type i,
 v_str type string.
data: cnt type i,
 idx type i,
 count1 type i,
 len type i,
 diff type i.
data: catalogid type string.
DATA : BEGIN OF DAT OCCURS 0,
 LIN type string,
 END OF DAT.
DATA: BASIC_TEXT LIKE THEAD OCCURS 0 WITH HEADER LINE.
DATA: YGUID LIKE COMM_PCAT_CTY-GUID,
 ZGUID LIKE COMM_PCAT_CTV-PARENT_CATEGORY.
DATA: BASICTEXT like TLINE OCCURS 0 WITH HEADER LINE.
DATA: IT_THEAD LIKE THEAD OCCURS 0 WITH HEADER LINE.
data: begin of IT_SERENA occurs 0,
 ID LIKE COMM_PCAT_CTY-ID,
 TEXT type string,
 end of IT_SERENA.
DATA:WA_SERENA like IT_SERENA.
DATA: wa_files TYPE rsfillst,
ifile LIKE TABLE OF wa_files.
data: begin of it_error occurs 0,
 err type string,
 end of it_error.
data: errorfile type string value 'error.txt'.
CALL FUNCTION 'SUBST_GET_FILE_LIST'
EXPORTING
 DIRNAME = p_path
 FILENM = '*'
PATTERN =
TABLES
 FILE_LIST = ifile
EXCEPTIONS
ACCESS_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at ifile into wa_files.
if not wa_files-name cs '.xml'.
 delete ifile.
endif.
endloop.
loop at ifile into wa_files.
concatenate p_path wa_files-name into p_file.
open dataset p_file for input in text mode encoding default.
if sy-subrc = 0.
 do.
 read dataset p_file into l_str.
 if l_str = space.
 exit.
 endif.
 if sy-subrc <> 0.
 concatenate text-002 p_file into it_error-err.
 append it_error.
 clear it_error.
 exit.
 else.
 jtab-text = l_str.
 append jtab.
 clear jtab.
 endif.
 enddo.
else.
 concatenate text-001 p_file into it_error-err.
 append it_error.
 clear it_error.
 continue.
endif.
loop at jtab.
 if jtab-text cs 'Catalog ID'.
 idx = sy-tabix .
 endif.
endloop.
read table jtab index idx.
if sy-subrc = 0.
 catalogid = jtab-text.
endif.
if catalogid cs '<![CDATA['.
 shift catalogid left by 56 places.
endif.
if catalogid cs ']]></field>'.
 replace ']]></field>' with space into catalogid.
endif.
write:/ 'Catalogid is:', catalogid.
IT_SERENA-ID = catalogid.
LOOP AT jTAB.
 if jtab-text cs 'longDescription'.
 start_line = sy-tabix + 1.
 exit.
 endif.
endloop.
cnt = start_line.
do.
 read table jtab index cnt.
 if jtab-text cs '</field>'.
 end_line = sy-tabix.
 exit.
 else.
 cnt = cnt + 1.
 endif.
enddo.
loop at jtab from start_line to end_line.
 concatenate jtab-text v_str into v_str separated by space.
endloop.
shift v_str left by 18 places.
shift v_str left by 10 places.
len = strlen( v_str ).
DO.
 IF COUNT1 >= LEN.
 EXIT.
 ENDIF.
 DIFF = LEN - COUNT1.
 IF DIFF < 125.
 DAT-LIN = v_str+COUNT1(DIFF).
 ELSE.
 DAT-LIN = v_str+COUNT1(125).
 ENDIF.
DAT-LIN = v_str+COUNT1(125).
 APPEND DAT.
 WRITE :/ DAT-LIN.
 CLEAR DAT.
 COUNT1 = COUNT1 + 125.
ENDDO.
REFRESH BASIC_TEXT.
REFRESH BASICTEXT.
CLEAR YGUID.
CLEAR ZGUID.
SELECT SINGLE GUID FROM COMM_PCAT_CTY INTO YGUID
 WHERE ID = IT_SERENA-ID.
IF NOT YGUID IS initial.
if sy-subrc <> 0.
 concatenate text-003 p_file into it_error-err.
 append it_error.
 clear it_error.
else.
 SELECT SINGLE GUID FROM COMM_PCAT_CTV INTO ZGUID
 WHERE PARENT_CATEGORY = YGUID.
ENDIF.
BASIC_TEXT-TDOBJECT = 'PCAT_CTY'.
BASIC_TEXT-TDNAME = ZGUID.
BASIC_TEXT-TDID = '0001'.
BASIC_TEXT-TDSPRAS = 'EN'.
APPEND BASIC_TEXT.
loop at DAT.
 BASICTEXT-TDFORMAT = '*'.
 BASICTEXT-TDLINE = DAT-LIN.
 APPEND BASICTEXT.
endloop.
refresh DAT.
loop at basictext.
 if basictext-tdline cs '![CDATA['.
 replace '![CDATA[' with space into basictext-tdline.
 ENDIF.
 modify basictext.
ENDLOOP.
loop at basictext.
 if basictext-tdline cs ']]>'.
 replace ']]>' with space into basictext-tdline.
 modify basictext.
 endif.
endloop.
CALL FUNCTION 'SAVE_TEXT'
 EXPORTING
 CLIENT = SY-MANDT
 HEADER = BASIC_TEXT
INSERT = 'X'
 SAVEMODE_DIRECT = 'X'
OWNER_SPECIFIED = ' '
LOCAL_CAT = ' '
 IMPORTING
FUNCTION =
 NEWHEADER = IT_THEAD
 TABLES
 LINES = BASICTEXT
EXCEPTIONS
 ID = 1
 LANGUAGE = 2
 NAME = 3
 OBJECT = 4
 OTHERS = 5
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR IT_THEAD.
IF SY-SUBRC = 0.
 WRITE:/ 'DATA UPLOADED SUCCESSFULLY'.
ELSE.
 WRITE:/ 'DATA NOT UPLOADED'.
ENDIF.
refresh jtab.
refresh DAT.
COUNT1 = 0.
clear v_str.
REFRESH BASICTEXT.
refresh dat.
close dataset p_file.
endloop.
open dataset errorfile for appending in text mode encoding default.
if sy-subrc = 0.
loop at it_error.
 transfer it_error-err to errorfile.
endloop.
close dataset errorfile.
endif.
Is there any other FM which is similar to SAVE_TEXT?

That depends. Can you please provide some more info how the programs are linked:
several steps in batch planning
cascade of submits
and what kind of failure might occur:
shortdump
Kind Regards
Klaus

TIME_OUT error in back ground

Similar Messages

Maybe you are looking for