Error "Too many devices are connected to this account"

i want to update the software can u help out error is coming like this jvm 517

saddamw77 wrote:
i want to update the software can u help out error is coming like this jvm 517
Hi and Welcome to the Community!
Here is a KB that discusses that error:
Article ID: KB19442 Hardware related JVM error codes
Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you. If you need more detailed instructions, please be very explicit about exactly what you wish to attempt...I'm sure we can guide you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

How can I tell how many devices are connected my itunes account via icloud?

How can I tell how many devices are connected my itunes account via icloud?

I only know what it says in the article. There it specifically says "iOS device" and it says. "You can view which devices or computers are currently associated," and, "Next to each device or computer name, you will be able to see when each was associated to your Apple ID." However, this is all in the context of, "When you turn on iTunes Match or Automatic Downloads, or when you download past purchases on an iOS device or computer, that device or computer becomes associated with your Apple ID." I guess if somebody simply logs in it won't show.

There are too many PIN changes associated with this account (Error ID: 30801)

how to solve this error on app world "There are too many PIN changes associated with this account (Error ID: 30801)" can anyone advice because I follow all the steps to solve it and no one answer me
I call the customer care using the free number then I call my provider to redirect me to blackberry customer care and no one help me
so is there any link can show me all the PIN which is assign to my account and manage them
Please Advice

Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB25553 "There are too many PIN changes associated with this account (Error ID: 30801)" is encountered when attempting to login to BlackBerry App World
As you see, the way to resolve it is clear, and you seem to have reached some folks in your attempts that were not able to resolve it. Nevertheless, you should not allow them to fob you off...insist that the KB instructs the resolution path and insist that they make good on that.
aleyadma wrote:
so is there any link can show me all the PIN which is assign to my account and manage them
No.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT204074 I do not see a "Manage Devices" link when I access my account information through iTunes. I want to know how many devices are linked to my account. Can anyone help?

I have accessed the Apple Support site http://support.apple.com/kb/ht4627 but I could not find the "Manage Devices" link on iTunes. The advice they give is as follows:
You can view which devices or computers are currently associated, remove unused devices or computers, and see how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer:
Open iTunes.
Sign in to your Apple ID by choosing Store > Sign In from the iTunes menu.
Choose Store > View My Account from the iTunes menu.
From the Account Information screen, click Manage Devices.
Next to each device or computer name, you will be able to see when each was associated to your Apple ID. You will also be able to track how many days are remaining before your associated devices or computers can be associated to a different Apple ID.
Help would be greatly appreciated! Thank you!

Hello from Albania,
Please help me !! I'm desperate
I sold my iPhone 4s a few months ago.
Now i got my self a new iPad and created a new apple ID which i recently accociated with ITunes and ICloud.
However, i can't update anything on my Mac since it still requires the old apple id, even though i changed it anywhere i could.
I also don't get the manage devices when i tried to do this through the iTunes.
I have no idea what to do.
Waiting for your reply.
Regards

There are too many PIN changes associated with this account (Error ID: 30801)" is encountered when attempting to login to BlackBerry App World

I have just been given a PlayBook and tried to download an App and ot this error, help, what can I do?
Thanks
Mark

Hi Mark,
You need to set up a new BlackBerry ID on your PlayBook.
If you bring up the options screen, then you may be able change it in the BlackBerry I'd option pane.
If you don't have the option, you need to reset (wipe) the PlayBook. There's an option called security wipe. Follow it through, and once it has restarted you can create a new BlackBerryID and start from scratch.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!

The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Too many parameters were provided in this RPC request. The maximum is 2100

Hello,
I am getting a new message this morning creating a view:
The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Too many parameters were provided in this RPC request. The maximum is 2100
Any ideas on this?
Thanks,
DOm
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

Hi,
Based on my research, this is a limitation of sql server.
http://msdn.microsoft.com/en-us/library/ms143432.aspx
And please refer to the below article to find a fix for this issue:
How to fix SQL error: "Too many parameters were provided in this RPC request"
http://blogs.msdn.com/b/emeadaxsupport/archive/2009/09/01/how-to-fix-sql-error-too-many-parameters-were-provided-in-this-rpc-request.aspx
Regards,
Yan Li
Regards, Yan Li

Router connection problems - DISH satellite receivers or too many devices?

(Sorry about that - I thought I had broken the message up.)
I'm having significant issues with my Linksys router timing out, and need help. I'll try to be as detailed as I can.
I have the following:
- Linksys WRT54G v3 wireless router I purchased off eBay 3-4 years ago. Using 128-bit WEP secirity. Even though the model says WRT54G, my Linksys setup page says I have a WRT54GL. Don't know if that's pertinent but thought I'd include the info)
- HP desktop running Vista Home Premium
- Gateway Solo laptop (circa 3Q 2002) running WinXP SP3, and also have WPC54G - Wireless-G Notebook Adapter
- Gateway M275 Notebook running Windows XP Tablet Edition w/SP3, internal wireless card
- Linksys WRE54G Wireless Range Expander, v3
My broadband internet connects to my cable modem, which then runs via ethernet to my router. I have my desktop connected to my router via (wired) ethernet cable (port 1), and the two laptops connect wirelessly. All three computers on my network run just fine and have had no connection issues until I had two (2) DISH satellite receivers installed this past Friday.
Prior to installation, I knew I would need the two receivers hooked up to my network via ethernet cable. Since one receiver was in the same room as my router, it was easy to run an ethernet cable from my router to the receiver (port 2). I had a challenge with the upstairs receiver, because I didn't have a direct connection, and wasn't sure how to wire it. So, I used my range expander by plugging in the expander into a nearby outlet, then connecting the receiver to the expander via ethernet cable.
I had some issues getting a good signal, and did some troubleshooting but made it work. Now I had five devices connected to my router: two with a wired ethernet cable and three wirelessly.
I started having connection timeouts within about 3-4 hours of satellite [receiver] installation. All of the sudden I couldn't connect to the internet on ANY device; both laptops couldn't connect wirelessly, my desktop couldn't connect, and the receivers were telling me my connection was bad. I checked modem but there were no issues. Still, I unplugged the power cable from the modem for a minute, then reconnected - still no internet. I called my cable company to have them troubleshoot the modem, but they pinged it several times & got positive results - still no internet, so I ruled the modem out.
I tried using the Windows connection troubleshooter to repair the problem, and got a DNS error message (which I don't know how to fix). I decided to unplug my router for 10-15 seconds, then plug back in - that got my internet connection going again. That lasted a couple hours & then failed. I unplugged the router again (is that a soft reset or a power cycle?), then reconnected & was able to connect to the internet. This happened a few more times over the weekend, and finally I decided the expander might be the issue (both DISH and Linksys tech support was not very helpful).
I found a way to wire my second receiver via ethernet cable (port 3), so now I had three wired devices, and two wireless devices. I thought this would fix the problem; it didn't, but at least I learned how to wire CAT5 cable. So I got that going for me... which is nice.
I plugged the ethernet cable directly from my modem to my desktop to test the timeout, but had no issues - the modem just wasn't the problem.
I was getting some IP address conflicts on my Norton Inernet Security, so I uninstalled that from my desktop, disconnected the power from the modem, disconnected the power from the router, shut down all devices, reset the IP addresses on the receivers, deleted the wireless connection from the laptops, shut down the desktop, and just left the whole mess alone for half a day. Then I reinstalled the Norton Internet Security, connected my wired devices, plugged the modem in, plugged the router in, reset my security, connected wirelessly with my laptops.
Within an hour my connection timed out.
Trying to chat with tech support wasn't feasible, as my connection kept going out. A guy at work said I shoudl ping my IP address, and let it repeat until my connection goes out. So I unplugged the router and plugged it back in to get an internet connection, the opened a cmd prompt and typed
ping 192.168.1.1 -t
I left it alone for a few hours, and when I came back, my internet connection was down, but I was still getting active pings - no problems there.
At this point I thought I had done everything except replacing my router (which I'm still tempted to do), but I called my broadband provider to see if there was anything they could do. One of the techs said I had too many devices connected to the internet, but I thought these routers were supposed to handle dozens of devices?
I finally called Linksys Tech Support and had a conversation for 90 minutes. We went through all the steps of unplugging the the modem, router & all connected devices, resetting the router, etc, etc. The only thing different he did was had me change my security from WPA to 64-bit WEP, and added passwords for DNA1 and DNS 2 (same password for each).
That was at 1:30am last night, and when I woke up to check my connection this morning, it was still connected. I have to check it again when I get home, but I'm wondering if I should just be prepared to get another router (and if so, any recommendations), or if there's something I'm still not doing that could resolve my issue - if I still have connection losses.
Also, I'm concerned about the security thing. If changing from WEP 128 or WPA to WEP 64 fixed my problem, I'm not sure I feel completely protected from intrusion - isn't that pretty much the least amount of security I can have (without forgoing it altogether)??
Finally, I've read a few threads suggesting possibly changing to static IP from DHCP; however, my satellite receiver installation documentation specifically advises against this for the receivers.
Anyway, I would very much appreciate some help.
Message Edited by CKdoubleU on 10-01-2008 08:43 AM

First please break that long text into separate paragraphs. No one wants to read one long runon sentences
With Knowledge… Impossible means nothing.
Credentials
Computer experience: 11 years
Cisco networks experience: 8 years
Network administrator: 6 years
N.E.T. networks experience: 6 years
Linksys networks experience: 6 years
Recent additions: A+ | Networks+ | Linux+ | Security+

DMEE error (Error Log - Too many payment mediums created for this payment group)

Hi Experts,
Please see the below error while generating the DMEE file.
Error Log - Too many payment mediums created for this payment group
Error is - Too many payment mediums created for this payment group
Please explain how to resolve this error.Send detail documentation how to rectify this error
Regards
Sreedhar

Hi Nimish Agarwal,
With reference to the error faced i.e. BFIBL02160 "too many payment
mediums created for this payment group", please review the information
provided in the long text of this error in detail.
Please ensure that the orders are not carried out several times.
Alternatively you can apply the optional usable message 166 (same
class: BFIBL02), so that you can prevent creating duplicates in future.
Please customize this message as an error so as to prevent the system
from creating duplicate files. You can customize this message in OBA5.
The message BFIBL02 160 always occurs, if you create more than one
file for the same payment run, in order to warn you not to send the
same file twice to the bank.
The SAPFPAYM program does not create 2 files at once. But if you
run this program more than once for the same payment run, more than
one file is created. From the second run on you receive the error
message BFIBL02 160. You can easily test it, by creating a new
payment proposal and creating a new file with this proposal and
SAPFPAYM. The first time you run this program you will not receive
the message.
Hope this clarifies.
Kind Regards,
Fernando Evangelista

Adobe FLME Error Message "Please check if video devices are connected properly and are not used by any other application."

Hello, I'm trying to use my MAC Book Pro with Adobe FMLE. Once I select either my internal or external camera and microphone, in the live encoder I get this error message. "Please check if video devices are connected properly and are not used by any other application." The Facetime HD camera works in Photo Booth. Can someone assist me in what to do please, Thanks in advance!

Hi all ,
We found the solution for this issue .
We have installed the crypto library in global executable directory and any way it will replicate those binaries to individual application servers.
But the parameters are still looking for global executable directory for loading crypto library during time.
So all application servers are trying to load crypto library files from global "exe" instead of local directory, which was clustered .Sometimes during heavy network load it may cause some delays to load the libraries to individual application servers and in turn is causing the license key issues.
Note 982056 - The license key library has not been initialized yet..
SAP Recommend option for all SSF parameters should be instance profile parameters not in default parameters..This was mentioned in below note:
Note 662340 - SSF Encryption Using the SAPCryptolib --- .
But in our Environment SSF and SEC parameter were set in DEFAULT profile instead Instance profile.
Recommendations:
o ssf/ssfapi_lib = <Path and file name of SAPCRYPTOLIB>
o sec/libsapsecu = <Path and file name of SAPCRYPTOLIB>
This was mentioned in the below SAP HELP.
http://help.sap.com/saphelp_nw04/helpdata/en/3d/bf463c6796e61ce10000000a114084/frameset.htm.

Error Log - Too many payment mediums created for this payment group

Hi Experts,
When I am doing payment to customers through T-code F110, I am able to clear the open item. But when we are executing the Payment medium - DME Administration, generate the Payment Advice and when we see the print preview of the Payment Advice in spool request, System is showing the following errors,
"BFIBL02160 Too many payment mediums created for this payment group"
"BFIBL02616 End of log for payment run 20120123 / NAA02 , NSD / 200"
"This is line 1/column 45 on page 1"
Message no. SP01R116
Kindly help how to rectify the same
Thanks in advance
Regards,
Nimish Agarwal

Hi Nimish Agarwal,
With reference to the error faced i.e. BFIBL02160 "too many payment
mediums created for this payment group", please review the information
provided in the long text of this error in detail.
Please ensure that the orders are not carried out several times.
Alternatively you can apply the optional usable message 166 (same
class: BFIBL02), so that you can prevent creating duplicates in future.
Please customize this message as an error so as to prevent the system
from creating duplicate files. You can customize this message in OBA5.
The message BFIBL02 160 always occurs, if you create more than one
file for the same payment run, in order to warn you not to send the
same file twice to the bank.
The SAPFPAYM program does not create 2 files at once. But if you
run this program more than once for the same payment run, more than
one file is created. From the second run on you receive the error
message BFIBL02 160. You can easily test it, by creating a new
payment proposal and creating a new file with this proposal and
SAPFPAYM. The first time you run this program you will not receive
the message.
Hope this clarifies.
Kind Regards,
Fernando Evangelista

Can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

When I connect my iPad to my iMac I get a repetitive flashing error message "iTunes could not connect to this iPhone. This device is no longer connected."

When I connect my iPad to my iMac I get a repetitive flashing error message "iTunes could not connect to this iPhone. This device is no longer connected." iPhoto eventually launches but iTunes will not launch iTunes. iPad will not charge. Restarted iMac and rebooted iPad and no difference.

Hi GJ374,
Thanks for using Apple Support Communities. This article has steps you can take for issues with your iPad not being correctly recognized in iTunes:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Ari

How to find out how many users are connected to Exchange 2013 servers in "Online" mode? This is coz, online mode causing server performance issues in our environment

All, Any script or method to find out how many users are connected to exchange servers in online mode?
Manju Gowda

Hi
You have to get the "RPC Client Access" log file in your CAS server. There you can see a column called "client-mode" and it has two modes such
as "classic" and "cached". From there you can get the two different client assess modes and their corresponding users.
probably take this file openup on excel and filter to see the two modes
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Error message about too many devices activated.

Need to reset devices for Adobe reader. Error message about too many devices activated.

Reader has no such limitation. It's either Acrobat or Digital Editions.

HT5622 i can't access my itunes account because there are too many devices attached too it?

I can't access my itunes account because it says i have too many devices attached to it. I need to clear some if the devices that are associated with my account?

Welcome to the Apple Community.
Remove some of the associated devices using your account settings in iTunes.

Error "Too many devices are connected to this account"

Similar Messages

Maybe you are looking for