ERROR: Unable to find AL_JobService.pid file in $LINK DIR/bin directory

Hi,
    We have a recent issue and could not find an appropiate reason, we have been running jobs in the linux server for almost 5 months now and we never had an issue.
                 Today the jobs wouldnt start - a blank trace log so we decided to check the DS job server and found it to be running fine. When i try to stop the job server it shows this error
Job Service Executable Path                           Status
/opt/apps/rapidmart/businessobjects/dataservices/bin/AL_JobService      Running
s: Start Job Service       o: Stop Job Service       q: Quit
Enter Option: o
Waiting for Job Service to terminate. This will take several seconds.
Please Wait!!!
ERROR: Unable to find AL_JobService.pid file in $LINK_DIR/bin directory.
Please help
Thanks
AJ

Hi Manoj,
I have found your reply very helpful. Thanks for this.
I was also experiencing the same error. While stopping the Job server I have interrupted it by control +c. so I was getting the same error. "ERROR: Unable to find AL_JobService.pid file in $LINK_DIR/bin directory"
Solution:-
First I have executed the command you shared to get the PID of AL_JobService
ps -aef | grep -i al_job
then I have executed another command to kill all the running instances of AL_Job
kill -15 <pid of AL_JobService.exe>
Then used regular command of Job Server utility.
./svrcfg
It worked.

Similar Messages

MDT: unable to find rule INI file

Hi,
I have a ts which always worked fine, now suddenly it throws me the error "unable to find rule INI file".
Strange thing is, I deleted the machine (vmware esxi), recreated it, same error, rebooted mdt server, same error.
I use another vm, NO ERROR ....
No clue here.
Pls advise.
J.
Jan Hoedt

did it fail searching for bootstrap.ini or customsettings.ini? deployment from UNC or offline media?
If you are still having problems, please copy the bdd.log file to a public site like OneDrive and share the link?
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Backint failed "ERROR: unable to find file "

Hello
I try to backup Oracle database 10.2 with netbackup tools on Redhat 2.6.18-53
I got errror:
BR0231E Backup utility call failed
ERROR: unable to find file /oracle/BWP/sapdata4
Can u help me
Regards
Fethi

This is the backup logfile:
BR0477I Oracle pfile /oracle/BWP/102_64/dbs/initBWP.ora created from spfile /oracle/BWP/102_64/dbs/spfileBWP.ora
BR0101I Parameters
Name                           Value
oracle_sid                     BWP
oracle_home                    /oracle/BWP/102_64
oracle_profile                 /oracle/BWP/102_64/dbs/initBWP.ora
sapdata_home                   /oracle/BWP
sap_profile                    /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.sap
backup_mode                    ALL
backup_type                    offline
backup_dev_type                util_file
util_par_file                  /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
system_info                    orabwp/orabwp hpbwpdb2 Linux 2.6.18-53.1.19.el5 #1 SMP Tue Apr 22 03:01:10 EDT 2008 x86_64
oracle_info                    BWP 10.2.0.2.0 8192 30 88160883 hpbwpdb2 WE8DEC UTF8
sap_info                       700 SAPSR3 BWP S1329078236 R3_ORA 0020159289
make_info                      linuxx86_64 OCI_102 Feb 8 2008
command_line                   brbackup -c force -p initBWP_sapdata_offline.sap
BR0116I ARCHIVE LOG LIST before backup for database instance BWP
Parameter                      Value
Database log mode              No Archive Mode
Automatic archival             Disabled
Archive destination            /oracle/BWP/oraarch/BWParch
Archive format                 %t_%s_%r.dbf
Oldest online log sequence     27
Next log sequence to archive   30
Current log sequence           30               SCN: 88160883
Database block size            8192             Thread: 1
Current system change number   88168768         ResetId: 655409152
BR0118I Tablespaces and data files
Tablespace     TS-Status F-Status File                                                       Size   Id.     Device Link    Type       MaxSize     IncrSize BlkSize
PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data1                      17498636288    4       64785 NOLINK FILE   34359721984    104857600     8192
PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data2                      16450060288    5       64785 NOLINK FILE   34359721984    104857600     8192
PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data3                      15820914688    6       64785 NOLINK FILE   34359721984    104857600     8192
PSAPBWP700     ONLINE*    ONLINE+   /oracle/BWP/sapdata2/BWM700.data1                   15128862720   11       64784 NOLINK FILE   34359721984    104857600     8192
PSAPBWP700     ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM700.data2                    4132511744   12       64785 NOLINK FILE   34359721984         8192     8192
PSAPBWPDIM     ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMdim.data1                    4202700800    7       64770 NOLINK FILE   10485760000     20971520     8192
PSAPBWPFACT    ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMfact.data1                   6719283200    8       64770 NOLINK FILE   34359721984     20971520     8192
PSAPBWPODS     ONLINE*    ONLINE+   /oracle/BWP/sapdata2/BWMods.data1                   19868426240    9       64784 NOLINK FILE   34359721984     20971520     8192
PSAPBWPUSR     ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMusr.data1                     239083520   10       64770 NOLINK FILE   10485760000     20971520     8192
PSAPSR3USR     ONLINE+    ONLINE+   /oracle/BWP/sapdata4/sr3usr_1/sr3usr.data1            134225920   20       64785 NOLINK FILE   10485760000     20971520     8192
PSAPTEMP       ONLINE#    ONLINE+   /oracle/BWP/sapdata1/temp_1/temp.data1              10485768192   -1       64770 NOLINK FILE   34358689792     20971520     8192
PSAPUNDO       ONLINE-    ONLINE+   /oracle/BWP/sapdata1/undo_1/undo.data1               1073750016    2       64770 NOLINK FILE   34359721984     20971520     8192
SYSAUX         ONLINE*    ONLINE+   /oracle/BWP/sapdata1/sysaux_1/sysaux.data1            671096832    3       64770 NOLINK FILE   10485760000     20971520     8192
SYSTEM         ONLINE*    SYSTEM+   /oracle/BWP/sapdata1/system_1/system.data1            838868992    1       64770 NOLINK FILE   10485760000     20971520     8192
BR0119I Redo log files
File                                                Size Group     Device Status    Link    Type
/oracle/BWP/origlogA/log_g11m1.dbf              52429312    1        64774 INUSE     NOLINK FILE
/oracle/BWP/mirrlogA/log_g11m2.dbf              52429312    1        64776 INUSE     NOLINK FILE
/oracle/BWP/origlogB/log_g12m1.dbf              52429312    2        64775 INUSE     NOLINK FILE
/oracle/BWP/mirrlogB/log_g12m2.dbf              52429312    2        64777 INUSE     NOLINK FILE
/oracle/BWP/origlogA/log_g13m1.dbf              52429312    3        64774 INUSE     NOLINK FILE
/oracle/BWP/mirrlogA/log_g13m2.dbf              52429312    3        64776 INUSE     NOLINK FILE
/oracle/BWP/origlogB/log_g14m1.dbf              52429312    4        64775 INUSE     NOLINK FILE
/oracle/BWP/mirrlogB/log_g14m2.dbf              52429312    4        64777 INUSE     NOLINK FILE
BR0120I Control files
File                                                Size   Id.      Device Link    Type
/oracle/BWP/origlogA/cntrl/cntlrBWP.dbf         34979840    0        64774 NOLINK FILE
/oracle/BWP/origlogB/cntrl/cntrlBWP.dbf         34979840    0        64775 NOLINK FILE
/oracle/BWP/sapdata1/cntrl/cntrlBWP.dbf         34979840    0        64770 NOLINK FILE
BR0616I Tablespaces in table TSORA for SAP owner SAPSR3:
PSAPBWP, PSAPBWP700, PSAPBWPDIM, PSAPBWPFACT, PSAPBWPODS,
PSAPBWPUSR
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
BR0057I Backup of database: BWP
BR0058I BRBACKUP action ID: bdxzgdlt
BR0059I BRBACKUP function ID: aff
BR0110I Backup mode: ALL
BR0077I Database files for backup:
/oracle/BWP/origlogA/log_g11m1.dbf
/oracle/BWP/origlogB/log_g12m1.dbf
/oracle/BWP/origlogA/log_g13m1.dbf
/oracle/BWP/origlogB/log_g14m1.dbf
/oracle/BWP/origlogA/cntrl/cntlrBWP.dbf
BR0061I 19 files found for backup, total size 108250.510 MB
BR0143I Backup type: offline
BR0130I Backup device type: util_file
BR0109I Files will be saved by backup utility
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
BR0307I Shutting down database instance BWP ...
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0308I Shutdown of database instance BWP successful
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0229I Calling backup utility with function 'backup'...
BR0278I Command output of '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c':
WARNING: unknown parameter: print_log_flag 1
WARNING: sort_backup_type not specified in .utl file
WARNING: default sort_backup_type to <size> for restore
Program:                /usr/sap/BWP/SYS/exe/run/backint 5.1
Input File:             /oracle/BWP/sapbackup/.bdxzgdlt.lst
Profile:                /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
Function:               BACKUP
Backup Type:            BACKUP_FILE
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data1
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data2
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data3
ERROR: unable to find file /oracle/BWP/sapdata2/BWM700.data1
ERROR: unable to find file /oracle/BWP/sapdata4/BWM700.data2
ERROR: unable to find file /oracle/BWP/sapdata1/BWMdim.data1
ERROR: unable to find file /oracle/BWP/sapdata1/BWMfact.data1
ERROR: unable to find file /oracle/BWP/sapdata2/BWMods.data1
ERROR: unable to find file /oracle/BWP/sapdata1/temp_1/temp.data1
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0279E Return code from '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c': 2
BR0232E 0 of 19 files saved by backup utility
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0231E Backup utility call failed
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.35
BR0304I Starting and opening database instance BWP ...
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.42
BR0305I Start and open of database instance BWP successful
BR0056I End of database backup: bdxzgdlt.aff 2008-05-23 15.59.33
Thank you
Regards

Win8繁体装lv打包的程序出错fatal error unable to find initialization file

win8繁体装lv打包的程序出错fatal error unable to find initialization file

我的labview是2012简体版本，在win7简体系统上开发

"Unable to find Pdf Resource files"

I am getting an error message on start up in Windows XP after a recent update. On start up I get the mesaage "Unable to find Pdf Resource files" C:\Documents and Settings\......\Adobe\Adobe PDF\Settings\*.Joboptions
Do you want to run the installer in repair mode.
I have seen several fixes for similar problems but nothing relating to the error occurring at start up.
I would be grateful if you could suggest a solution. I have reinstalled Adobe Pro V8 and the error is still there

In the default settings, it shows "Standard". Try going to the menu above labelled settings and you will likely see an edit options selection. See if you can edit the selection. You can also try selecting other settings with the arrow at the right side of the settings selection (It is a select box) to see if other files are available. You should also be able to see the settings file in the printer properties and be able to edit it also. Trying these games may home in on the problem, particularly if it indicates you do not have access.
Just as a check, open an application that you might like to print to PDF. Then go to the print menu and select print-to-file with the Adobe PDF printer. Once you have that file printed, open it in Distiller and see if you get the proper processing. This manual process is the most basic of the PDF creation processes in Acrobat. All of the other processes build on it. Thus we are checking basic functionality to be sure I did not miss something as we went along.
If the print-to-file works out to give you a PDF, then try printing to the printer without that option selected and hopefully the PDF is created directly (no manual step with Distiller). Each of the next steps would go up the chain in the checkout.
Bill

Exception in thread "main" java.lang.Error: Unable to find named traits: org.puremvc.as3.multicore.p

Hi all,
i try to use pfi with a project that i did with air in flash builder.
I make my swf with ant task
    <target name="releasecompile" depends="init">
    <echo>
              Ant Task :: releaseCompile
    </echo>
        <java jar="${MXMLC.JAR}" fork="true" failonerror="true">
           <arg value="-debug=false"/>
            <arg value="+flexlib=${SDK_HOME}frameworks"/>
            <arg value="+configname=air"/>
            <arg value="-file-specs=${MAIN_SOURCE_FILE}"/>
            <arg value="-output=${build}/${APP_ROOT_FILE}"/>
        <arg value="-external-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5.swc" />
        </java>
    </target>
i have a swf in result and i play pfi like this
./pfi -package -target ipa-ad-hoc -provisioning-profile /Users/stef/Desktop/PROJECT/PROJECT_Config-2.mobileprovision -storetype pkcs12 -keystore /Users/stef/Desktop/PROJECT/Certificats2.p12 -storepass mypass /Users/stef/Desktop/PROJECT/PROJECTConfig.ipa /Users/stef/Documents/Adobe\ Flash\ Builder\ 4/PROJECT/src/PROJECTConfigurateur-app.xml -C /Users/stef/Desktop/PROJECT/ PROJECTConfigurateur.swf Default.png icons/Icon57.png icons/Icon29.png icons/Icon512.png
Exception in thread "main" java.lang.Error: Unable to find named traits: org.puremvc.as3.multicore.patterns.facade::Facade
at adobe.abc.Domain.resolveTypeName(Domain.java:195)
at adobe.abc.Domain.resolveTypeName(Domain.java:112)
at adobe.abc.GlobalOptimizer$InputAbc.resolveTypeName(GlobalOptimizer.java:274)
at adobe.abc.GlobalOptimizer$InputAbc.readInstance(GlobalOptimizer.java:837)
at adobe.abc.GlobalOptimizer$InputAbc.readAbc(GlobalOptimizer.java:388)
at adobe.abc.GlobalOptimizer$InputAbc.readAbc(GlobalOptimizer.java:280)
at adobe.abc.LLVMEmitter.generateBitcode(LLVMEmitter.java:160)
at com.adobe.air.ipa.AOTCompiler.convertAbcToLlvmBitcode(AOTCompiler.java:329)
at com.adobe.air.ipa.AOTCompiler.GenerateMacBinary(AOTCompiler.java:600)
at com.adobe.air.ipa.IPAOutputStream.compileRootSwf(IPAOutputStream.java:196)
at com.adobe.air.ipa.IPAOutputStream.finalizeSig(IPAOutputStream.java:366)
at com.adobe.air.ADTPackager.createPackage(ADTPackager.java:65)
at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:165)
at com.adobe.air.ADTEntrypoint.parseArgsAndGo(ADTEntrypoint.java:132)
at com.adobe.air.ipa.PFI.parseArgsAndGo(PFI.java:152)
at com.adobe.air.ADTEntrypoint.run(ADTEntrypoint.java:68)
at com.adobe.air.ipa.PFI.main(PFI.java:112)
do you have some ideas about this ?
Regards
Stef

Ok,
    <target name="releasecompile" depends="init">
    <echo>
              Ant Task :: releaseCompile
    </echo>
        <java jar="${MXMLC.JAR}" fork="true" failonerror="true">
           <arg value="-debug=false"/>
            <arg value="+flexlib=${SDK_HOME}frameworks"/>
            <arg value="+configname=air"/>
            <arg value="-file-specs=${MAIN_SOURCE_FILE}"/>
            <arg value="-output=${build}/${APP_ROOT_FILE}"/>
        <arg value="-external-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5. swc" />
        </java>
    </target>
I mistake this line
<arg value="-external-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5. swc" />
must be
<arg value="-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5.swc" />
for include the content in the swf.
Regards
Stef

[SOLVED] - Arch Boot Error: Unable to find Root Device /dev/sdb1

I had Arch running perfectly using /dev/sdb1 (versus Disk Label or UUID) and decided to do a update. After the Update I can't boot
to a running system, and I get this error message:
ERROR: Unable to find root device /dev/sdb1
You are being dropped into a recovery shell.
Is there an easy way to convert to UUID or Disk Label since the latest Upgrade doesn't allow me to continue to use /dev/sdb1 ??
I'd prefer not to have to rebuild both USB Flash Drives to get functional systems.
Any Help is greatly appreciated.
Suggestions?
Larry
Last edited by lkraemer (2012-02-21 15:14:02)

Check your grub and read https://wiki.archlinux.org/index.php/UUID#By-uuid
Edit:
https://bbs.archlinux.org/viewtopic.php … 0#p1059160
https://bbs.archlinux.org/viewtopic.php?pid=1059338
https://bbs.archlinux.org/viewtopic.php?id=135288
Last edited by karol (2012-02-21 01:07:21)

Debugging in JDev91, "Error: Unable to find fdebug.exe"

Hi,
I'm using JDev9i in Windows2000. When I try to debug my software JDev9i says; "Error: Unable to find fdebug.exe".
I have checked all security settings of my folders, (as someone proposed here to some one else, who had problem which was also linked somehow to fdebug.exe -file), but security settings were ok.
Can someone help me somehow ?
.JKa.

have you checked that fdebug.exe is on your system?
It should be in <jdevroot>\jdk\jre\bin

AutoPatch error: Unable to find job when restart

OS is RHEL 5.7, and Oracle ebs R12.1.1 installed with patch applied 6078836, 11072566, 8576725...
Problem summary: AutoPatch error:Unable to find job when restarting, and FND_INSTALL_PROCESSES table does not exist
In the NLS patch update with 4 merged patches,
while 16 workers are running to create rdf files as below, it made my Putty (v0.60) crashed. Below example is succeeded case taken from the log of one worker to let you know which task was on-going...
Source: /d01/oracle/SID/apps/apps_st/appl/pa/12.0.0/reports/SF/PAXPCTCE.rdf
Successfully generated report "PAXPCTCE.rdf".
Generated 1 files successfully.
Generated 0 files with non-fatal warnings.
Generated 0 files with fatal errors.
adrepgen is exiting with status 0
End of adrepgen session
Date/time is Wed Sep 07 2011 15:22:44
Eventually, I had to run adctrl for changing job status <Failed>, and re-run adpatch. Then it ran several assigned jobs completed successfully.
Then again, it made my Putty crash, and repeated few times like that.
When there are 69 jobs remaining, autopatch error occurred.
There are now 69 jobs remaining (current phase=A1001):
0 running, 69 ready to run and 0 waiting.
Reading completed jobs from restart file (if any).
AutoPatch error:
Unable to find job when restarting.
When adctrl was checked to see worker status [1],
Enter your choice [1] : 1
Error: The FND_INSTALL_PROCESSES table does not exist.
This table is used for communication with the
worker processes, and if it does not exist, it
means that the workers are not running,because
the ad utility has not started them yet.
How can this be resolved?
Can I just re-run the patch as if it runs newly by ignoring the previous session of adpatch when asked the continuation of the previous session at the adpatch?
Will this help?
Thanks as always for the help.
- SH

Error: The FND_INSTALL_PROCESSES table does not exist.
This table is used for communication with the
worker processes, and if it does not exist, it
means that the workers are not running,because
the ad utility has not started them yet.
How can this be resolved? If the table does not exist, then you cannot fix it.
Can I just re-run the patch as if it runs newly by ignoring the previous session of adpatch when asked the continuation of the previous session at the adpatch?
Will this help?Correct -- This is the only option you have.
Thanks,
Hussein

Graphics Error: Unable to find suitable font!

I am trying to use the program rasmol (that displays molecules), and I get the error:
Graphics Error: Unable to find suitable font!
I installed rasmol by
pacman -Sy rasmol
today for version 2.7.3-2
also did I do a system upgrade today:
pacman -Suy
the section "Files" in /etc/X11/xorg.conf contains:
ModulePath "/usr/lib/xorg/modules"
RgbPath "/usr/share/X11/rgb"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/encodings"
FontPath "/usr/share/fonts/util"
I have added all directories in /usr/share/fonts to be sure and restarted X.
I tried installing all font packages that I could find, but the error is still the same:
#pacman -Q | grep font
font-bh-ttf 1.0.0-2
fontcacheproto 0.1.2-1
fontconfig 2.3.2-6
fontsproto 2.0.2-1
gsfonts 8.11-3
libfontenc 1.0.2-1
libxfont 1.1.0-1
libxfontcache 1.0.2-1
ttf-ms-fonts 1.3-8
xorg-font-utils 1.0.1-1
xorg-fonts-alias 1.0.1-1
xorg-fonts-encodings 1.0.0-1
xorg-fonts-misc 1.0.0-2
#pacman -Q | grep ttf
font-bh-ttf 1.0.0-2
sdl_ttf 2.0.8-1
ttf-bitstream-vera 1.10-4
ttf-cheapskate 2.0-4
ttf-isabella 1.003-2
ttf-junicode 0.6.5pre20051126-2
ttf-ms-fonts 1.3-8
I removed the fonts.dir and fonts.scale in /usr/share/fonts and /usr/share/fonts/TTF and did mkfontscale and mkfontdir
to replace them.
restarting X and retrying to run rasmol still gives the same error.
I have tried to search google for the error message but all I could find was the source code that probably produced the message:
http://www.bernstein-plus-sons.com/soft … c/x11win.c
and some redhat binary file that gives some fonts seemingly along with the error message:
http://www.bernstein-plus-sons.com/cgi- … smol_16BIT
...Options^@Colours^@Display^@File^@Graphics Error: %s!^@-*-*-bold-o-normal-*-14-*^@-*-serf-bold-o-normal-*-14-*^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@-*-helvetica-bold-o-normal-*-14-*^@Unable to find suitable font^@%x %s^@Comm....
which might be an indication for which fonts I need.
Could anyone please give me some assistance to get the program working,
perhaps by giving advise on how to install the abovementioned fonts
or anything else that I have failed to do.
I would really appreciate it , thanx

Hey,
i too get the same error that no suitable fonts could be found. I installed all the fonts mentioned in this thread. My Section "Files" looks like this:
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/artwiz-fonts"
FontPath "/usr/share/fonts/speedo"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/encodings"
FontPath "/usr/share/fonts/util
EndSection
Still the error occurs. Does somebody know how to fix this?
greetings koelle

Error: Unable to find all subVIs from saved VIs.

TestStand 2010 SP1, LabVIEW 2011, WinXP
Trying to build a deployment in TestStand.
During the build, I get the now-infamous popup:
Title: "Save Modified VIs?"
Text: "An error occured while trying to read the dependencies of your VIs; a possible cause for this problem is VIs not saved in the current version of LabVIEW. Would you like to save any modified VIs now?"
I select "yes", and the build then fails with errors in the log pane of the "Build Status" window. The error is:
Error: Unable to find all subVIs from saved VIs, either a subVI is missing or the VI is not saved under the current LabVIEW version.
The missing file path is: etc, etc.
I go to said missing path. The VI is in fact present. I open the VI and do "Save All", try again. Same thing. Then, I try a Mass Compile on the test VI directory. Attempt to build again, same error.
Note that I do call some VIs dynamically, but those are all present in my workspace, and are not found in this error.
Is there a debugging option or log file or some kind of trace I can do to dig into this and find out the state of things causing the error? Please help me out here.
-Andy

One quick way to narrow down the issue is to change your LabVIEW adapter to Run-Time engine and then try and run the sequence in the Sequence Editor.
Also, triple check your search directories and make sure you're not pulling in VIs from an unexpected location.
When you see that dialog it's already too late to save so trying to Save at that point never works.
Another tip is to ignore which VIs it says are not saved in the current version and instead look at the subVIs that those VIs are calling. You can run into this if you have two subVIs loaded with the same name.
CTA, CLA, MTFBWY

SIM Error - Unable to find screen - Create Item Ticket and Signer error

Hi,
When I bring up the SIM application from Eclipse, everything works normally.
But I navigate to ITEM TICKET SCREEN, and here when i click on Create , to create an Item Ticket,
ideally It should open the Item Ticket Detail Screen,
instead it throws an error,
2013-01-14 11:30:16,855 ERROR [AWT-EventQueue-1][application.NavigationManager] Unable to find screen: oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailScreen
and the screen is not opened, it just maintains the current screen which is ITEM TICKET LIST SCREEN,
but this is present in Navigation.xml screen and then i am able to find it in one for the project folders,
Any idea why exactly I am getting this issue, any way to make it work fine.
it was working sometime back, and i dont think any change regarding this has been made.
sim version :13.2
in a totally un-realted scenario (that's what I think, there is one more class "NEWRetailItemSearchProcessor", for this I get an exception,
signer information does not match signer information of other classes in the same package
I have two questions,
1. Is it because of the signer Issue, I am getting the other error -"*Unable to find screen: oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailScreen*"
2. How do I resolve the signer issue,
it says,
class "oracle.retail.sim.closed.simclient.editor.NEWRetailItemSearchProcessor"'s signer information does not match signer information of other classes in the same package
but in this package "oracle.retail.sim.closed.simclient.editor" -- there is no other class except the one mentioned NEWRetailItemSearchProcessor
2013-01-14 11:30:16,855 ERROR [AWT-EventQueue-1][application.NavigationManager] Unable to find screen: oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailScreen
2013-01-14 11:30:16,855 ERROR [AWT-EventQueue-1][application.NavigationManager] java.lang.SecurityException: class "oracle.retail.sim.closed.simclient.editor.NEWRetailItemSearchProcessor"'s signer information does not match signer information of other classes in the same package
     at java.lang.ClassLoader.checkCerts(ClassLoader.java:776)
     at java.lang.ClassLoader.preDefineClass(ClassLoader.java:488)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:615)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
     at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
     at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
     at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
     at oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailPanel.initializeScreen(ItemTicketDetailPanel.java:136)
     at oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailPanel.<init>(ItemTicketDetailPanel.java:116)
     at oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailScreen.<init>(ItemTicketDetailScreen.java:16)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:501)
     at java.lang.Class.newInstance0(Class.java:350)
     at java.lang.Class.newInstance(Class.java:303)
     at oracle.retail.sim.closed.application.NavigationManager.createScreen(NavigationManager.java:166)
     at oracle.retail.sim.closed.application.NavigationManager.startScreen(NavigationManager.java:183)
     at oracle.retail.sim.closed.application.NavigationManager.navigate(NavigationManager.java:78)
     at oracle.retail.sim.closed.application.SimplifiedApplicationFrame.navigate(SimplifiedApplicationFrame.java:221)
     at oracle.retail.sim.closed.application.SimplifiedApplicationFrame.actionPerformed(SimplifiedApplicationFrame.java:211)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
     at java.awt.Component.processMouseEvent(Component.java:5517)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3129)
     at java.awt.Component.processEvent(Component.java:5282)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3984)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3819)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1791)
     at java.awt.Component.dispatchEvent(Component.java:3819)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at oracle.retail.sim.closed.swing.event.HotKeyEventQueue.dispatchEvent(HotKeyEventQueue.java:34)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Edited by: 924506 on 14 Jan, 2013 3:53 AM

to fix the signer issue
1) open the jar which contains required class file( i mean the one which gets called when u click on item tick button)
in winrar software
2) and remove below files
manifest.mf and mykey.sf or somthing.sf
then resign your jar and deploy it.
i hop this would work fine.
some time what happen when we sign the jar it does not removes old sign instead removing it enter one more entry in that file
hence it has two entry.
its better to follow above steps.

Newfs error: "Unable to find Media type. Proceeding with system determined"

Hi,
I have the Solaris 10 update 6 installed on one server:
bash-3.00# more /etc/release
Solaris 10 10/08 s10x_u6wos_07b X86
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 27 October 2008
bash-3.00#
I have noticed that if I run command newfs, I get the following error: "Unable to find Media type. Proceeding with system determined parameters."
bash-3.00# newfs /dev/md/rdsk/d100
/dev/md/rdsk/d100: Unable to find Media type. Proceeding with system determined parameters.
newfs: /dev/md/rdsk/d100 last mounted as /export
newfs: construct a new file system /dev/md/rdsk/d100: (y/n)? y
/dev/md/rdsk/d100: Unable to find Media type. Proceeding with system determined parameters.
/dev/md/dsk/d100 is mounted, can't mkfs
bash-3.00#
What does this error mean? It did not occurr in earlier versions of Solaris. Can it be ignored or maybe the syntax for newfs has changed and I am doing something incorrectly?
Thanks,
Przemek

[natural weight loss diet|http://www.goarticles.com/cgi-bin/showa.cgi?C=1633072]
[confessions of a lazy super affiliate|http://www.squidoo.com/lazysuperaffiliate-reviewdetails]
[how to stop panic attacks|http://simple-fix.blogspot.com/2009/04/how-to-stop-panic-attacks-permanently.html]
[Acer AS4530-6823|http://www.goarticles.com/cgi-bin/showa.cgi?C=1638379]
Anwar [http://healthy-weight-loss-plan.info/about/index.html]

Fatal Error: Unable to find package java.lang in classpath or bootclasspath

Hi,
I am trying to build my project using ant tool, but it is erroring out as follows:
Buildfile: D:\My Software\eclipse\workspace\ShoppingCart\build.xmlprepare:compile: [javac] Compiling 2 source files to D:\My Software\eclipse\workspace\ShoppingCart\build\WEB-INF\classes [javac] Fatal Error: Unable to find package java.lang in classpath or bootclasspath BUILD FAILEDD:\My Software\eclipse\workspace\ShoppingCart\build.xml:46: Compile failed; see the compiler error output for details. Total time: 1 second Please find the build.xml:
<project name="Shopping Cart" default="compile" basedir="."> <property name="app.name" value="ShoppingCart" /> <property name="app.path" value="/${app.name}" /> <property name="app.version" value="0.1-dev" /> <property name="build.home" value="${basedir}/build" /> <property name="catalina.home" value="C:\Program Files\Apache Software Foundation\Tomcat 5.0" /> <property name="dist.home" value="${basedir}/bin" />  <property name="manager.url" value="http://localhost:8080/manager" /> <property name="src.home" value="${basedir}/src" /> <property name="web.home" value="${basedir}/web" /> <property name="lib.home" value="${basedir}/WEB-INF/lib" /> <target name="all" depends="clean,compile" description="Clean build and dist directories, then compile" /> <target name="clean" description="Delete old build and dist directories"> <delete dir="${build.home}" /> <delete dir="${dist.home}" /> </target> <target name="prepare">  <mkdir dir="${build.home}" /> <mkdir dir="${build.home}/WEB-INF" /> <mkdir dir="${build.home}/WEB-INF/classes" />  <copy todir="${build.home}/web"> <fileset dir="${web.home}" /> </copy>   <mkdir dir="${build.home}/WEB-INF/lib" /> <copy todir="${build.home}/WEB-INF/lib"> <fileset dir="${lib.home}" /> </copy>   </target> <target name="compile" depends="prepare" description="Compile Java sources">  <mkdir dir="${build.home}/WEB-INF/classes" /> <javac srcdir="${src.home}" destdir="${build.home}/WEB-INF/classes" bootclasspath="${lib.home}" source="1.5"/>  <copy todir="${build.home}/WEB-INF/classes"> <fileset dir="${src.home}" excludes="**/*.java" /> </copy> </target> <target name="dist" depends="compile" description="Create binary distribution">   <jar jarfile="${dist.home}/${app.name}-${app.version}.war" basedir="${build.home}" />  </target> </project> thnx,
Rakesh

Sounds like your JBuilder environment is screwed up; see what the classpath and bootclasspath are set to, and correct the error. (This is a question that belongs on a JBuilder website.)

LMS 4.1 error unable to load the MIB file

when load MIB file have error unable to load the MIB file Error: can't find RFC1155-SMI
I can not find RFC1155-SMI.my Where I can find or download RFC1155-SMI.my
Thank

The following thread has RFC-1212.my in it. You can downlaod from there :
https://supportforums.cisco.com/thread/174886
Mostly all the Cisco MIB will be available @ :
ftp://ftp.cisco.com/pub/mibs/v1/ OR ftp://ftp.cisco.com/pub/mibs/v2/
The above you requested are non-cisco mib, which can be extracted either from RFC or they canbe found in some univerisites FTP or some free sites like oidview :
http://www.oidview.com/mibs/detail.html
-Thanks
Vinod

ERROR: Unable to find AL_JobService.pid file in $LINK DIR/bin directory

Similar Messages

Maybe you are looking for