SIM Error - Unable to find screen - Create Item Ticket and Signer error

Hi,
When I bring up the SIM application from Eclipse, everything works normally.
But I navigate to ITEM TICKET SCREEN, and here when i click on Create , to create an Item Ticket,
ideally It should open the Item Ticket Detail Screen,
instead it throws an error,
2013-01-14 11:30:16,855 ERROR [AWT-EventQueue-1][application.NavigationManager] Unable to find screen: oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailScreen
and the screen is not opened, it just maintains the current screen which is ITEM TICKET LIST SCREEN,
but this is present in Navigation.xml screen and then i am able to find it in one for the project folders,
Any idea why exactly I am getting this issue, any way to make it work fine.
it was working sometime back, and i dont think any change regarding this has been made.
sim version :13.2
in a totally un-realted scenario (that's what I think, there is one more class "NEWRetailItemSearchProcessor", for this I get an exception,
signer information does not match signer information of other classes in the same package
I have two questions,
1. Is it because of the signer Issue, I am getting the other error -"*Unable to find screen: oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailScreen*"
2. How do I resolve the signer issue,
it says,
class "oracle.retail.sim.closed.simclient.editor.NEWRetailItemSearchProcessor"'s signer information does not match signer information of other classes in the same package
but in this package "oracle.retail.sim.closed.simclient.editor" -- there is no other class except the one mentioned NEWRetailItemSearchProcessor
2013-01-14 11:30:16,855 ERROR [AWT-EventQueue-1][application.NavigationManager] Unable to find screen: oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailScreen
2013-01-14 11:30:16,855 ERROR [AWT-EventQueue-1][application.NavigationManager] java.lang.SecurityException: class "oracle.retail.sim.closed.simclient.editor.NEWRetailItemSearchProcessor"'s signer information does not match signer information of other classes in the same package
     at java.lang.ClassLoader.checkCerts(ClassLoader.java:776)
     at java.lang.ClassLoader.preDefineClass(ClassLoader.java:488)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:615)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
     at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
     at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
     at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
     at oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailPanel.initializeScreen(ItemTicketDetailPanel.java:136)
     at oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailPanel.<init>(ItemTicketDetailPanel.java:116)
     at oracle.retail.sim.shared.swing.itemticket.ItemTicketDetailScreen.<init>(ItemTicketDetailScreen.java:16)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:501)
     at java.lang.Class.newInstance0(Class.java:350)
     at java.lang.Class.newInstance(Class.java:303)
     at oracle.retail.sim.closed.application.NavigationManager.createScreen(NavigationManager.java:166)
     at oracle.retail.sim.closed.application.NavigationManager.startScreen(NavigationManager.java:183)
     at oracle.retail.sim.closed.application.NavigationManager.navigate(NavigationManager.java:78)
     at oracle.retail.sim.closed.application.SimplifiedApplicationFrame.navigate(SimplifiedApplicationFrame.java:221)
     at oracle.retail.sim.closed.application.SimplifiedApplicationFrame.actionPerformed(SimplifiedApplicationFrame.java:211)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
     at java.awt.Component.processMouseEvent(Component.java:5517)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3129)
     at java.awt.Component.processEvent(Component.java:5282)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3984)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3819)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1791)
     at java.awt.Component.dispatchEvent(Component.java:3819)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at oracle.retail.sim.closed.swing.event.HotKeyEventQueue.dispatchEvent(HotKeyEventQueue.java:34)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Edited by: 924506 on 14 Jan, 2013 3:53 AM

to fix the signer issue
1) open the jar which contains required class file( i mean the one which gets called when u click on item tick button)
in winrar software
2) and remove below files
manifest.mf and mykey.sf or somthing.sf
then resign your jar and deploy it.
i hop this would work fine.
some time what happen when we sign the jar it does not removes old sign instead removing it enter one more entry in that file
hence it has two entry.
its better to follow above steps.

Similar Messages

Backint failed "ERROR: unable to find file "

Hello
I try to backup Oracle database 10.2 with netbackup tools on Redhat 2.6.18-53
I got errror:
BR0231E Backup utility call failed
ERROR: unable to find file /oracle/BWP/sapdata4
Can u help me
Regards
Fethi

This is the backup logfile:
BR0477I Oracle pfile /oracle/BWP/102_64/dbs/initBWP.ora created from spfile /oracle/BWP/102_64/dbs/spfileBWP.ora
BR0101I Parameters
Name                           Value
oracle_sid                     BWP
oracle_home                    /oracle/BWP/102_64
oracle_profile                 /oracle/BWP/102_64/dbs/initBWP.ora
sapdata_home                   /oracle/BWP
sap_profile                    /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.sap
backup_mode                    ALL
backup_type                    offline
backup_dev_type                util_file
util_par_file                  /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
system_info                    orabwp/orabwp hpbwpdb2 Linux 2.6.18-53.1.19.el5 #1 SMP Tue Apr 22 03:01:10 EDT 2008 x86_64
oracle_info                    BWP 10.2.0.2.0 8192 30 88160883 hpbwpdb2 WE8DEC UTF8
sap_info                       700 SAPSR3 BWP S1329078236 R3_ORA 0020159289
make_info                      linuxx86_64 OCI_102 Feb 8 2008
command_line                   brbackup -c force -p initBWP_sapdata_offline.sap
BR0116I ARCHIVE LOG LIST before backup for database instance BWP
Parameter                      Value
Database log mode              No Archive Mode
Automatic archival             Disabled
Archive destination            /oracle/BWP/oraarch/BWParch
Archive format                 %t_%s_%r.dbf
Oldest online log sequence     27
Next log sequence to archive   30
Current log sequence           30               SCN: 88160883
Database block size            8192             Thread: 1
Current system change number   88168768         ResetId: 655409152
BR0118I Tablespaces and data files
Tablespace     TS-Status F-Status File                                                       Size   Id.     Device Link    Type       MaxSize     IncrSize BlkSize
PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data1                      17498636288    4       64785 NOLINK FILE   34359721984    104857600     8192
PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data2                      16450060288    5       64785 NOLINK FILE   34359721984    104857600     8192
PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data3                      15820914688    6       64785 NOLINK FILE   34359721984    104857600     8192
PSAPBWP700     ONLINE*    ONLINE+   /oracle/BWP/sapdata2/BWM700.data1                   15128862720   11       64784 NOLINK FILE   34359721984    104857600     8192
PSAPBWP700     ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM700.data2                    4132511744   12       64785 NOLINK FILE   34359721984         8192     8192
PSAPBWPDIM     ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMdim.data1                    4202700800    7       64770 NOLINK FILE   10485760000     20971520     8192
PSAPBWPFACT    ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMfact.data1                   6719283200    8       64770 NOLINK FILE   34359721984     20971520     8192
PSAPBWPODS     ONLINE*    ONLINE+   /oracle/BWP/sapdata2/BWMods.data1                   19868426240    9       64784 NOLINK FILE   34359721984     20971520     8192
PSAPBWPUSR     ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMusr.data1                     239083520   10       64770 NOLINK FILE   10485760000     20971520     8192
PSAPSR3USR     ONLINE+    ONLINE+   /oracle/BWP/sapdata4/sr3usr_1/sr3usr.data1            134225920   20       64785 NOLINK FILE   10485760000     20971520     8192
PSAPTEMP       ONLINE#    ONLINE+   /oracle/BWP/sapdata1/temp_1/temp.data1              10485768192   -1       64770 NOLINK FILE   34358689792     20971520     8192
PSAPUNDO       ONLINE-    ONLINE+   /oracle/BWP/sapdata1/undo_1/undo.data1               1073750016    2       64770 NOLINK FILE   34359721984     20971520     8192
SYSAUX         ONLINE*    ONLINE+   /oracle/BWP/sapdata1/sysaux_1/sysaux.data1            671096832    3       64770 NOLINK FILE   10485760000     20971520     8192
SYSTEM         ONLINE*    SYSTEM+   /oracle/BWP/sapdata1/system_1/system.data1            838868992    1       64770 NOLINK FILE   10485760000     20971520     8192
BR0119I Redo log files
File                                                Size Group     Device Status    Link    Type
/oracle/BWP/origlogA/log_g11m1.dbf              52429312    1        64774 INUSE     NOLINK FILE
/oracle/BWP/mirrlogA/log_g11m2.dbf              52429312    1        64776 INUSE     NOLINK FILE
/oracle/BWP/origlogB/log_g12m1.dbf              52429312    2        64775 INUSE     NOLINK FILE
/oracle/BWP/mirrlogB/log_g12m2.dbf              52429312    2        64777 INUSE     NOLINK FILE
/oracle/BWP/origlogA/log_g13m1.dbf              52429312    3        64774 INUSE     NOLINK FILE
/oracle/BWP/mirrlogA/log_g13m2.dbf              52429312    3        64776 INUSE     NOLINK FILE
/oracle/BWP/origlogB/log_g14m1.dbf              52429312    4        64775 INUSE     NOLINK FILE
/oracle/BWP/mirrlogB/log_g14m2.dbf              52429312    4        64777 INUSE     NOLINK FILE
BR0120I Control files
File                                                Size   Id.      Device Link    Type
/oracle/BWP/origlogA/cntrl/cntlrBWP.dbf         34979840    0        64774 NOLINK FILE
/oracle/BWP/origlogB/cntrl/cntrlBWP.dbf         34979840    0        64775 NOLINK FILE
/oracle/BWP/sapdata1/cntrl/cntrlBWP.dbf         34979840    0        64770 NOLINK FILE
BR0616I Tablespaces in table TSORA for SAP owner SAPSR3:
PSAPBWP, PSAPBWP700, PSAPBWPDIM, PSAPBWPFACT, PSAPBWPODS,
PSAPBWPUSR
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
BR0057I Backup of database: BWP
BR0058I BRBACKUP action ID: bdxzgdlt
BR0059I BRBACKUP function ID: aff
BR0110I Backup mode: ALL
BR0077I Database files for backup:
/oracle/BWP/origlogA/log_g11m1.dbf
/oracle/BWP/origlogB/log_g12m1.dbf
/oracle/BWP/origlogA/log_g13m1.dbf
/oracle/BWP/origlogB/log_g14m1.dbf
/oracle/BWP/origlogA/cntrl/cntlrBWP.dbf
BR0061I 19 files found for backup, total size 108250.510 MB
BR0143I Backup type: offline
BR0130I Backup device type: util_file
BR0109I Files will be saved by backup utility
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
BR0307I Shutting down database instance BWP ...
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0308I Shutdown of database instance BWP successful
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0229I Calling backup utility with function 'backup'...
BR0278I Command output of '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c':
WARNING: unknown parameter: print_log_flag 1
WARNING: sort_backup_type not specified in .utl file
WARNING: default sort_backup_type to <size> for restore
Program:                /usr/sap/BWP/SYS/exe/run/backint 5.1
Input File:             /oracle/BWP/sapbackup/.bdxzgdlt.lst
Profile:                /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
Function:               BACKUP
Backup Type:            BACKUP_FILE
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data1
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data2
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data3
ERROR: unable to find file /oracle/BWP/sapdata2/BWM700.data1
ERROR: unable to find file /oracle/BWP/sapdata4/BWM700.data2
ERROR: unable to find file /oracle/BWP/sapdata1/BWMdim.data1
ERROR: unable to find file /oracle/BWP/sapdata1/BWMfact.data1
ERROR: unable to find file /oracle/BWP/sapdata2/BWMods.data1
ERROR: unable to find file /oracle/BWP/sapdata1/temp_1/temp.data1
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0279E Return code from '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c': 2
BR0232E 0 of 19 files saved by backup utility
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0231E Backup utility call failed
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.35
BR0304I Starting and opening database instance BWP ...
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.42
BR0305I Start and open of database instance BWP successful
BR0056I End of database backup: bdxzgdlt.aff 2008-05-23 15.59.33
Thank you
Regards

Error: "Unable to find a working IR device" in Windows Vista 64-bit, Audigy 4

I have Audigy 4 Pro with the RM-500 remote that came with it.
The remote is not working in Vista 64-bit (Enterprise).
It is definitely not a hardware problem because everything works in Windows XP Professional SP3. When I dual boot into Vista, the remote doesn't control anything in Windows but the red light on the I/O external box is blinking so it's definitely receiving input.
When I run "Entertainment Center Settings", I get the error "Unable to find a working IR device" and all the options are greyed out.
<img title="err" width="300" style="width: 300px; height: 69px" src="http://img379.imageshack.us/img379/238/2278203yd.jpg" height="69" alt="err">
<img width="459" title="err2" style="width: 459px; height: 393px" src="http://img379.imageshack.us/img379/388/2850392ep2.jpg" height="393" alt="err2">
Has anyone gotten the remote working in Windows Vista 64-bit's? Thank you for your help.
Regards,
Lawrence

_ I am having this exact same issue on vista business 32 bit. Everything else on the external box works perfectly fine, except the remote. The remote does work however with intelliremote, but I cannot justify paying the money for such simple functionality. Any fix on [email protected]

Unexpected error: unable to find item name at page or application level

HI!
I upgrade my application from apex 3.0 to 3.1
I created a new page.
When trying to insert a new row, on clicking "create", the page displays the error :
Unexpected error: unable to find item name at page or application level
This error didn't appear in apex 3.0
What this error can be? Is it a bug of APEX 3.1?
Thank you!

I have seen this in combination with javascript. Recreating the item helped.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Nokia Lumia 620 "Error: Unable to find bootable op...

Hello
I'm in need of some help with my Nokia Lumia 620. It is 21 months old. It was running on Lumia Denim (WindowsPhone8 (8.10.14219) according to the Hardware/Software Info on my account on windowsphone.com)
Today the screen suddenly went black when I tried to open the email app and started to display the message "Error: Unable to find bootable option. Press any key to shutdown"
I have tried removing the battery and replacing it after ten mins. I still get the error.
I have tried removing the battery and sim card and replacing the battery after ten mins. Still no joy.
I have tried to perform a HARD reset. This doesn't work as as soon as the power button vibrates and I press the volume down button the phone shuts down, the exclamation mark never appears.
Please could you point me in the right direction for solving this and getting my phone up and running

Hi, deffers90. Welcome to Microsoft Mobile Community. Since all the possible troubleshooting steps didn't help, consider sending the phone to our Care Points for assessment as suggested by @93tid. Everything will be deleted once the phone undergoes repair. To look for the nearest Care Points within your area, see: Local support. Keep us posted.

Unable to find SCREEN PAINT

i am unable to find SCREEN PAINT option while i created an new company and new DATA Base. Can any one resolve my issue.

Hi,
What version of B 1 you are using?
go to admin>>addons>>add on administration.....check here that screen painter addon is installed or not ?
if you do not find here screen painter then go to your SAP B 1 dump >>packeges>>screen painter>>run the .exe file
Regards
Deepak Tyagi

Nokia lumia 520 error unable to find a bootable option

pls help as lost all my apps and contacts it turned on fine then last week I should add so lol I installed a update however yesterday it wouldn't let me access any messages or calls just kept turning to home screen arrrrgghh xmas day lol then it just turned
off and displayed this message at top off the screen{ERROR Unable to find a bootable option. Press A\any key to shut down all my contacts banking pdfs and photos were on this phone can a\ny one help me by telling me what to do................

Unfortunately the phone is DOA. The memory chip that stores the boot information and OS went bad. I'd suggest you contact Nokia support over VZW to get a replacement. Phone us - Nokia - USA

JVM Loader Error: Unable to find supported JDK or JRE version

Hello,
I am trying to use Visibroker (Borland version 6.5) with JDK 1.5.2
When I try to run idl2java, it gives me the following message:
JVM Loader Error:
Unable to find a supported JDK or JRE version. The JVM Version should be either 1.3.1 or 1.4.1 and above.
Check your installation and use -VBJjavavm or -javahome(vbj only) to specify the JDK or JRE location
I am using eclipse IDE - i created an external tool configuration for idl2java giving the argument *.idl
I looked in the forum and tried the suggestions given in this thread
http://forum.java.sun.com/thread.jspa?threadID=376403&messageID=3052413
Where am I going wrong. Can someone help me?
Thaks
Manju

Hi,
I don't know if you got an answer to this problem. It looks like you need to install Borland Service Pack 1 (for BES 6.5) to fix this issue. I spent a couple of days squirming, trying to figure out this issue.
Hope this helps.
Regards,
Sony.

Nokia 822 ERROR: Unable to find bootable option.

My 822 now says, "ERROR: Unable to find bootable option. Press any key to shut down."
This occurred earlier today immediately upon installing a Verizon update. The phone worked perfectly before the update.
What is going on? I certainly am not going to accept responsibility for this failure, or replacing this phone.
Before you ask, the phone is in perfect condition otherwise. Never dropped. Never seen even a drop of water (or any other liquid).
One thing peculiar I did notice was that the update took over an hour to download, which seems like quite a long time considering data transfer rates.
So, what can be done?
To recap:
1) My phone worked perfectly. It was in perfect condition.
2) An update was installed (which Verizon recommended (and I'd go as far as to say forced))
3) Now the phone is completely inoperable, only giving the error message listed above.
Help please?

Hi Joel, the sim card has been removed and reinstalled multiple times with no effect. And yes, only the the original Verizon software was on the device. To be clear, the phone was attempting to install a Verizon-forced update when it died. I would rather have not had the update because the phone was working perfectly, but Verizon does not give the option to decline updates, only delay them. It should be noted that with the help of Verizon associate (Lovesa) the Nokia Software Recovery Tool was attempted, but even that did nothing.
I have now done at least 8 hours of research on this and it is obvious this is a widespread and known issue with the 822. There appears to be absolutely nothing that can be done to revive the phone at this point. After viewing literally hundreds of posts on the "unable to find bootable option" error no one has found a fix. This issue is well documented.
Why Verizon would force an update that ruins users phones is beyond me. And to take no responsibility is, in my view (and most likely the law's view), criminal. To be completely honest and forthright, I am so upset about this situation Verizon is now losing a 15 year loyal customer.

AutoPatch error: Unable to find job when restart

OS is RHEL 5.7, and Oracle ebs R12.1.1 installed with patch applied 6078836, 11072566, 8576725...
Problem summary: AutoPatch error:Unable to find job when restarting, and FND_INSTALL_PROCESSES table does not exist
In the NLS patch update with 4 merged patches,
while 16 workers are running to create rdf files as below, it made my Putty (v0.60) crashed. Below example is succeeded case taken from the log of one worker to let you know which task was on-going...
Source: /d01/oracle/SID/apps/apps_st/appl/pa/12.0.0/reports/SF/PAXPCTCE.rdf
Successfully generated report "PAXPCTCE.rdf".
Generated 1 files successfully.
Generated 0 files with non-fatal warnings.
Generated 0 files with fatal errors.
adrepgen is exiting with status 0
End of adrepgen session
Date/time is Wed Sep 07 2011 15:22:44
Eventually, I had to run adctrl for changing job status <Failed>, and re-run adpatch. Then it ran several assigned jobs completed successfully.
Then again, it made my Putty crash, and repeated few times like that.
When there are 69 jobs remaining, autopatch error occurred.
There are now 69 jobs remaining (current phase=A1001):
0 running, 69 ready to run and 0 waiting.
Reading completed jobs from restart file (if any).
AutoPatch error:
Unable to find job when restarting.
When adctrl was checked to see worker status [1],
Enter your choice [1] : 1
Error: The FND_INSTALL_PROCESSES table does not exist.
This table is used for communication with the
worker processes, and if it does not exist, it
means that the workers are not running,because
the ad utility has not started them yet.
How can this be resolved?
Can I just re-run the patch as if it runs newly by ignoring the previous session of adpatch when asked the continuation of the previous session at the adpatch?
Will this help?
Thanks as always for the help.
- SH

Error: The FND_INSTALL_PROCESSES table does not exist.
This table is used for communication with the
worker processes, and if it does not exist, it
means that the workers are not running,because
the ad utility has not started them yet.
How can this be resolved? If the table does not exist, then you cannot fix it.
Can I just re-run the patch as if it runs newly by ignoring the previous session of adpatch when asked the continuation of the previous session at the adpatch?
Will this help?Correct -- This is the only option you have.
Thanks,
Hussein

Error: Unable to find matching navigation case

Hi all, after I wrote this thread:
ui:include if I pass a variable, some one can tell me some tips?
I do some step forward and now the application returns this error:
Unable to find matching navigation case with from-view-id '/include.xhtml' for action '#{stiliPortaleController.prepareEdit}' with outcome 'logic.action(WEB-INF/jspf/stiliPortale/Edit.xhtml)'
Can some one help me?
The include.xhtml is on "web root" and the second page "Edit.xhtml" is on WEB-INF/jspf/stiliPortale/Edit.xhtml... the strange thing (for me that I'm newbie) is that I have these two method:
     public String include_page(){
String value="WEB-INF/jspf/stiliPortale/List.xhtml";
     setPageIncluded(value);
     return "include";
public String action(String value)
setPageIncluded(value);
return "include";
and the first method works properly the second nope!
The difference is that the first method is called in a JSF page, the second in a managed bean!
What shoud I do?
Thank you for your help!

As usual I continued to search the solution of my problem and I find something about the Fluent navigation.
Now I add in my faces-config.xml this code:
<navigation-rule>
<from-view-id>/include.xhtml</from-view-id>
<navigation-case>
<from-action>#{stiliPortaleController.prepareEdit}</from-action>
<from-outcome>logic.action('WEB-INF/jspf/stiliPortale/Edit.xhtml')</from-outcome>
<to-view-id>/include.xhtml</to-view-id>
</navigation-case>
</navigation-rule>
...and now the error disappeared but... the page doesn't change!
The code is this, index.xhtml I have:
                    <h:commandLink action="#{ logic.action('WEB-INF/jspf/stiliPortale/List.xhtml') }" value="Show All StiliPortale Items"/>
...and it's work recalling this method in logic.class:
public void setPageIncluded(String pageIncluded)
this.pageIncluded=pageIncluded;
public String action(String value)
        setPageIncluded(value);
    return "include";
...and in include.xhtml I have this code:
<ui:include src="#{logic.pageIncluded}"/>
...and, as I said, It works properly because the application open the page include.xhtml included the List.xhtml.
Now the problem is the in the List.xhtml I have this link:
                            <h:commandLink action="#{stiliPortaleController.prepareEdit}" value="#{bundle.ListStiliPortaleEditLink}"/>
...and in StiliPortaleController.java I have this method:
    public String prepareEdit() {
        current = (StiliPortale) getItems().getRowData();
        selectedItemIndex = pagination.getPageFirstItem() + getItems().getRowIndex();
return "logic.action('WEB-INF/jspf/stiliPortale/Edit.xhtml')";
...I think the problem is that when I recall the method action the second time it initialize a new logic object and the include.xhtml take the variable from the first object! Could it be correct?
If it is correct, how can I resolve this new problem?
Thank you for your help!

Fatal Error: Unable to find package java.lang in classpath or bootclasspath

Hi,
I am trying to build my project using ant tool, but it is erroring out as follows:
Buildfile: D:\My Software\eclipse\workspace\ShoppingCart\build.xmlprepare:compile: [javac] Compiling 2 source files to D:\My Software\eclipse\workspace\ShoppingCart\build\WEB-INF\classes [javac] Fatal Error: Unable to find package java.lang in classpath or bootclasspath BUILD FAILEDD:\My Software\eclipse\workspace\ShoppingCart\build.xml:46: Compile failed; see the compiler error output for details. Total time: 1 second Please find the build.xml:
<project name="Shopping Cart" default="compile" basedir="."> <property name="app.name" value="ShoppingCart" /> <property name="app.path" value="/${app.name}" /> <property name="app.version" value="0.1-dev" /> <property name="build.home" value="${basedir}/build" /> <property name="catalina.home" value="C:\Program Files\Apache Software Foundation\Tomcat 5.0" /> <property name="dist.home" value="${basedir}/bin" />  <property name="manager.url" value="http://localhost:8080/manager" /> <property name="src.home" value="${basedir}/src" /> <property name="web.home" value="${basedir}/web" /> <property name="lib.home" value="${basedir}/WEB-INF/lib" /> <target name="all" depends="clean,compile" description="Clean build and dist directories, then compile" /> <target name="clean" description="Delete old build and dist directories"> <delete dir="${build.home}" /> <delete dir="${dist.home}" /> </target> <target name="prepare">  <mkdir dir="${build.home}" /> <mkdir dir="${build.home}/WEB-INF" /> <mkdir dir="${build.home}/WEB-INF/classes" />  <copy todir="${build.home}/web"> <fileset dir="${web.home}" /> </copy>   <mkdir dir="${build.home}/WEB-INF/lib" /> <copy todir="${build.home}/WEB-INF/lib"> <fileset dir="${lib.home}" /> </copy>   </target> <target name="compile" depends="prepare" description="Compile Java sources">  <mkdir dir="${build.home}/WEB-INF/classes" /> <javac srcdir="${src.home}" destdir="${build.home}/WEB-INF/classes" bootclasspath="${lib.home}" source="1.5"/>  <copy todir="${build.home}/WEB-INF/classes"> <fileset dir="${src.home}" excludes="**/*.java" /> </copy> </target> <target name="dist" depends="compile" description="Create binary distribution">   <jar jarfile="${dist.home}/${app.name}-${app.version}.war" basedir="${build.home}" />  </target> </project> thnx,
Rakesh

Sounds like your JBuilder environment is screwed up; see what the classpath and bootclasspath are set to, and correct the error. (This is a question that belongs on a JBuilder website.)

My 822 now says, "ERROR: Unable to find bootable option. Press any key to shut down." Just happened after my phone froze. Everything I've searched says to replace the phone. I have no phone in or out, no alarm....what is going on with this? I see others

My 822 now says, "ERROR: Unable to find bootable option. Press any key to shut down." Just happened after my phone froze. Everything I've searched says to replace the phone. I have no phone in or out, no alarm....what is going on with this? I see others have the same problem.

Just got the same error message today. My phone went to the black screen of death with the error message at the top. Contacted Verizon via chat. Was online for 1 hour and 15 minutes only to find out that nothing could be done which I could have told them based upon what I had read on this site. Of course my phone is out of warranty since I have had it for 1 1/2 years and I am not eligible for an upgrade. How convenient! I was told to contact Nokia which I did and they gave me a download to try to reset everything. It looked like it was working but after almost 3 hours it got to the end and nothing happened. It just froze even though it said it was done. I rebooted the phone and am back at the same black screen of death. Guess I have to buy a used phone and then will have to reconsider whether or not to stay with Verizon going forward. I have not had any issues with the phone in the past - keep it in an otter box, never dropped, never got wet, etc. But all of a sudden it goes haywire like this that seems like either a hardware or software problem but something completely out of my control and all I get is sorry, you're out of warranty!

Nokia Lumia 520 Error: Unable to find bootable opt...

My Nokia Lumia 520 unexpectadly shut down and reebotted as i proceeded to pause my music. now the only reaction i reiceve from it is a black screen which says Error: Unable to find bootable option. Press any key to shut down.
if anyone has only proven solutions in fixing this issue, please let me know.
Thanks.

Hi, srikanth93.
If you are pertaining to Lumia phones that has the Windows Phone 8.1 software, yes, those are supported by the Nokia Software Recovery Tool. You can verify this info here: http://www.microsoft.com/en-ph/mobile/support/product/lumia520/faq/?action=singleTopic&topic=FA14298.... If the recovery tool is installed on your computer & it's still not recognizing your phone, try to uninstall it and install again. By the way, have you tried coordinating this with a different Nokia Care Point for a second opinion?
Note that the link will direct you to the local support page of the Philippines. If you're from a different location, go here: http://www.microsoft.com/en/mobile/support/locations/.
Best of luck and welcome to the Nokia Support Discussions. ;-)

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

Which version of OSX and what email provider are you using.

SIM Error - Unable to find screen - Create Item Ticket and Signer error

Similar Messages

Maybe you are looking for