Error using PlanType3 only in Planning ver. 11.1.1.3

Hi, we are implementing Planning ver. 11.1.1.3 and are using all 3 of our PlanTypes. We have accounts which we only want to use with PlanType3, however we are receiving an error when choosing only this PlanType when creating/modifying the account. This occurs sporadically as we have added accounts using only this PlanType, but now we cannot modify these accounts or add any new Accounts to PlanType3 (unless we also check PlanType1 too). This seems to be a bug. Is anyone aware of this bug and how to resolve or provide a workaround? Your thoughts/comments are greatly appreciated.
Thanks,
Drew

If you are sure that the pattern and the way search you are doing is correct and have tried and tested with other members also .. then this could be a bug .. check with 11.2.5.200

Similar Messages

Error using 'Search' option in Planning.

Hi,
when i expand my webforms list on the left side of the Planning interface i am able to see all the folders expected.
on selecting one of those folders say 'x' i get a list of forms under 'x' which is fine .
But when i type the name of webform which is placed under folder 'x' in Search option which at bottom right side of the planning interface,
I get an the error ' exception occured. you dod not have sufficient access to view this page'.
But the point over here is if i am able to see and access the webform while searching for same webform why i am i getting this error.
can anybody help me on this?
Thanks
NJ

Hi,
when i expand my webforms list on the left side of the Planning interface i am able to see all the folders expected.
on selecting one of those folders say 'x' i get a list of forms under 'x' which is fine .
But when i type the name of webform which is placed under folder 'x' in Search option which at bottom right side of the planning interface,
I get an the error ' exception occured. you dod not have sufficient access to view this page'.
But the point over here is if i am able to see and access the webform while searching for same webform why i am i getting this error.
can anybody help me on this?
Thanks
NJ

He "seller" resets the iPad for me to use, do I have to get it re-activated or purchase a contract/service plan if I ONLY ever plan to use the iPad for Wifi Only???

Question to all the pros..I'm looking to purchase an iPad 4g second hand. Once the "seller" resets the iPad for me to use, do I have to get it re-activated or purchase a contract/service plan if I ONLY ever plan to use the iPad for Wifi Only???

No you don't need a service plan to use wifi. Take special precautions to make sure the seller is the owner. Be sure all their information has been removed properly. If it were me I wouldn't give the person the money until the iPad is registered in my name. I've read too many horror stories of people buying iPads they'll never be able to use because someone else's ID was still on it.

HT4285 i have been using my mac book pro for almost an year..My use is pretty safe as i use it only at my home and do not carry it at office... my sues is shall i consider the APPLECARE PLAN....the plan is almost 20% of the laptops cost.

i have been using my mac book pro for more than 11 months.
.My use is pretty safe as i use it only at my home and do not carry it to office...
my confusion is that shall i consider the APPLECARE PLAN....the plan is almost 20% of the laptops cost....Will spending so much money be worth it

Like any other insurance, it's only worth it if you have a problem. I've purchased it on my "high risk" Macs and not purchased on the others. So far I've never needed it.

ODI 10.1.3.4.0 - Topology Manager Connection Error using SQL 2005 SP3

Hello All,
I am using the ODI repository in SQL 2005 SP3. I could create my master repository using the following parameters:
driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
URL:jdbc:microsoft:sqlserver://server_name:1433;SelectMethod=direct;DataBaseName=ODI
I needed to copy to the drivers directory all files of SQL 2000 (msutil.jar, msbase.jar,mssqlserver.jar) and SQL 2005 (sqljdbc.jar). I am using the JRE 1.4.2 and JDBC 2005 1.2 (http://msdn.microsoft.com/en-us/library/ms378422(SQL.90).aspx)
But when I try to connect in Topology Manager to create the work repository appears the following error:
using this driver string: com.microsoft.jdbc.sqlserver.SQLServerDriver
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC] Can't start a cloned connection while in manual transaction mode.
using this driver string: com.microsoft.sqlserver.jdbc.SQLServerDriver
java.sql.SQLException: No suitable driver
Does Somebody know what is happening?
Regards,
Wallace Galvao
Sao Paulo - Brazil

Hi,
If you plan on using the SQL Server 2005 drivers then you only need the 1.2 sqljdbc.jar file in the drivers directory.
The connection details for SQL Server 2005 should be like the following.
com.microsoft.sqlserver.jdbc.SQLServerDriver
jdbc:sqlserver://<sqls machine>:1433;databaseName=<db name>;integratedSecurity=false
I would try just with just the correct driver in place, remove the others, restart any ODI components and then make sure the connection information is correct like above.
Cheers
John
http://john-goodwin.blogspot.com/

What is the advantages/disadvantages of using BPEL only without BAM?

What is the advantages/disadvantages of using BPEL only without BAM, and the combination for Error and Exception management in SOA?
Please let me know if anybody had this experience?

Hi,
Both variants have pro's and cons. If you plan to use VBA you have to consider the deployment settings on other p.c.'s where you have to allow macro's where as a regular form doesn't have the need for that.
That said the userform gives you much more control because the form command is not saved. it is simply a temporary form which you have to setup every time. It's perfect for data entry. If you are looking for data validation the userform is the one to go
for. You also have the possibility to work on placements of the data entry.
So if you are looking for speed and simplicity then go for the form command. If it is handling control you are after I'd go for a userform.
Just my 2 cts
Maurice
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer. Thank You

Help: An error when I initial the planning areas:internal error

Hi,
An error when I initial the planning areas, I create time series objects for planning area DP01, system show an error message to me as follow:
internal error [/SAPAPO/OM_TS_TGRID_CREATE]
Message no. /SAPAPO/TSM099
Thanks,
Thomson

Hi Thomson,
I think in planning area you did not only add the time series key figures
to the planning area but also defined key figure semantics for those
key figures. This must not be. To see those semantics you can check
the key figure details in transaction /SAPAPO/MSDP_ADMIN on the
key figure tab by selecting key figure details. For the time series
keyfigures, the semantics column is filled with values like 300, 301,
etc. If you wants to use time series key figures in addition
to the standard SNP-key figures, the semantics field has to be empty.
You can compare that with the settings in the other planning area where
everything is working fine.
If this is not the case then please refer the below note and execute the consistency reports as in note:
577038 Data inconsistencies in SNP
Regards,
Sunitha.

Error while creating Rough cut planning profile

Facing the following error while creating rough cut planning profile (mc35) in SOP for product group. "Work center x plant y does not exist for task list type 3". pls advise- do i need to create tsk list for product group? pls advise with tcode to be used.

pls check the (task list ) usage you have maintained in the Work center.
In OP45 , pls ensure that for the usage ,
task list type 3 (Rough cut planning profile) is included.
If it is not included there , pls include the TL type 3 for your usage and now the prob will get solved.
Regards.,
Sheik

I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues. Now getting error "You can only install one Adobe product at a time. Please complete the other installation before attempting to install ......." There is no other Adobe

I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues. Now getting error "You can only install one Adobe product at a time. Please complete the other installation before attempting to install ......." There is no other Adobe product installing. I have used the Adobe Cleaner Tool many times and uninstalled other Adobe Products but neither has worked. I have uninstalled/reinstalled this CD version of Dreamweaver several times when changing computers and after having computer issues. A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues. Please help.

A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues.
Absolutely not. You are misinterpreting things. The activation check never happens when just running the installer, only much later. It means what it says - there is another "install" pending/ active on your system, meaning somewhere there is an (invisible) process still blocking things. Either way, since you haven't provided any real technical info, we can't advise specifically. if you are on Windows, you may want to check your task manager and terminate any setup.exe and msiexec.exe processes plus potentially may need to manually fix/ delete some registry keys. For anything beyond that you will have to be much more specific.
Mylenium

Error -- While Uploading Data into Planning Book

Hi all...
working on SCM 4.1...
In Planning book...while loading the data of one SKU-Location into the PB , i am getting the below error...
"Overflow during propagation calculation: Number too large"
Message no. /SAPAPO/OM_TS078
Diagnosis
An overflow occurred while propagating a change to a key figure within the LCA routine.
In this case an internal error in the LCA routine is concerned.
*ProcedureCreate an OSS message as detailed in SAP Note 167280.*
can anybody help me to resolve the same as i couldnot ablt to view the data in planning book for one of the Product-location.
Regards,
Rajesh Patil

Hi Senthil,
For Some of the SKUs it is giving the Error , some abrupt values are stored in Live Cache for these SKUs(CVC), thats why it giving the Error.
The only solution is ..i have to delete the CVCs and create new one...
But i will loose the data as we cant take the Backup of Old CVC data --> Giving COM Error
The reason of Abrupt Values in Live Cache Could Be -->.>
Macro/Alerts
How can we fix these types of Error , as regularly i am getting these Error??
Is there any Note/Patch to overcome this issue?
Will be GR8 if i will get the solution..
Regards,
Rajesh Patil

Syntax error: annotations are only available if source level is 5.0

In eclipse, I am trying a hello world JMS tutorial.
In the code below, it doesn't like the @ sign for some reason... And I don't know how to make it happy....
It give this error:
Syntax error: annotations are only available if source level is 5.0
--------------code------------
public class MessageSender {
@Resource(mappedName = "jms/GlassFishBookConnectionFactory")
private static ConnectionFactory connectionFactory;
Here is my path if that helps.
Path=C:\oracle\product\10.2.0\client_1\bin;C:\Program Files (x86)\Java\jre8\bin;c:\glassfish4\glassfish\bin;C:\Program Files (x86)\Java\jdk1.8.0\bin
Thanks for any leads!
Jim

It give this error:
Syntax error: annotations are only available if source level is 5.0
That exception is telling you that the java compiler version being used to compile your java source is not 5.0 or later.
Eclipse uses 'some' version of Java to run itself. And, by default, your java code will use that same version of java unless you configure it to use a different version.
http://wiki.eclipse.org/Eclipse.ini#Specifying_the_JVM
One of the most recommended options to use is to specify a specific JVM for Eclipse to run on. Doing this ensures that you are absolutely certain which JVM Eclipse will run in and insulates you from system changes that can alter the "default" JVM for your system. Many a user has been tripped up because they thought they knew what JVM would be used by default, but they thought wrong. eclipse.ini lets you be CERTAIN.
Check the version of java that eclipse is using. Just because that version of java is not on your path doesn't mean eclipse isn't using it.
Then repost your question in an eclipse forum.

Restrict Item Category Item Creation using Reference Only

Hi All
Here is the scenario, I want "Restrict Item Category Item Creation using Reference Only"
a.Retrieve document number VBELN from sales order header table VBAK for the current order. Check if the sales order is of type ZAB referencing field AUART in table VBAK.
note : Any changes to existing sales order "ZAB" will be performed in thesame sales order type(ZAB) in VA02 transaction.
b.If step a is passed, check internal table structure for sales order item level as XVBAP-PSTYV for possible item category values of 'ZDEF' for the entered line item and document number (XVBAP-VBELN).
c.If the cancel/change item category values are found on the line item, check internal table structure for document flow (XVBFA) if the cancel/change item category was created as reference:
i.Check if entry exists in XVBFA for the preceding document number field VBELV with value equal to value in the subsequent document number field VBELN. This value must equal the current sales document number VBELN in table VBAK.
ii.The above check must be done in conjunction with the following check:
1.Check if entry exists in XVBFA for the preceding document type field VBTYP_V with value C equals subsequent document type field VBTYP_N with value of C.
d.Once the above checks are passed, collect the item number from internal table XVBAP (Field: POSNR) for the change/cancel item category line item added to the sales order.
e.Check if the item number retrieved in the previous step exists in table VBAP (Field: POSNR) with an item category that is not part of the list of cancel/change item category defined in step b.
f. Check if the item number collected in the previous step exists in the subsequent item number (Field : POSNN) in internal table XVBFA for the row that passed checks in steps b and c.
g.If item number exists, check if this subsequent item number field equals the preceding item number field value (Field: POSNV) in table XVBFA.
h.If step g fails, generate an error message stating that the user needs to the create the cancel/change item category line item with reference to the original line item and do not allow the user to proceed with the transaction.
i.If step g succeeds, allow the user to proceed with the transaction.
can any one send me the logic for this scenario.
Rgds
Chinna

Hi Chinna,
Please use BADI "BADI_SD_SALES_ITEM" to achieve your requirement..
Let me know if you have further questions..
BR
Rakesh

The new podcast app is using up my data plan

The new "podcast app" is using up my data plan like crazy! Its costing me much much more money now to listen to my podcast. They want donations to keep them "free" but this is much much futher from free. What is going on! I want it to go back to the way it was. Please dont tell me about them being free on WIFI I know that. I dont live in the city so the only WIFI is never where I can get it when I use them. Even driving down the road , if I loose service the podcast stops and my bill is over the top! What can I do to make it stop!!!!!??? This is a very bad move.
Also what is the yellow "other" on my itunes sync thing that show how much of what is using up the space on my phone? I have taken almost everything off of the phone and almost half of the space is the yellow other. I can not wipe my phone and start over I have legal text messages I have to keep for court on my phone.
Im very unhappy with this move of Apples and others are unhappy with it too or havent caught on to it yet.
Please change it or let us know what to do to end this issue.
thank you
ami
PS, I will be contacting the the podcasts to let them know that the donations will now be going to pay for the NO LONGER FREE PODCASTS.

This has been really frustrating me too! I made sure the 'use data' was turned off in settings, and yet when I was listening to a podcast, it went from one that I had downloaded to one that I hadn't downloaded without stopping, so I used up a ton of data! It was because I was 'subscribed' to that podcast, which meant every darn episode ever was appearing in my list of podcasts - you can set it to download them automatically, but I don't want to download every single podcast for some, and there's no way to easily pick and choose like there used to be (with the 'get more podcasts' button). In the end, I've just unsubscribed from all my podcasts, and I'll go find them one by one - it's really annoying, but it seems like it's all (downloading every possible episode, which for some is a lot weekly) or downloading manually by going to the catalogue. I miss the old podcasts. Also, I don't think it's cooler that it's not merged with my other music anymore. Why was that necessary?

JDriver error using WLS6.1 w/ Oracle 8.1.7

Hello,I am getting the error listed when starting my weblogic server after creating a connection pool and datasource through the weblogic (6.1) console. I am currently using the jDriver 5.1.0 oracle kit. I used this kit previously with the WLS6.0sp1 installation and had no errors.Any suggestions? Thanks in advance!-Christine--***** BEGIN ERROR*******Starting Loading jDriver/Oracle .....-------- LOGIN ERROR CODE: 24327---------- LOGIN ERROR CODE: 24327<Aug 17, 2001 1:40:22 PM EDT> <Error> <JDBC> <Cannot startup connection pool "ConnPool" weblogic.common.ResourceException:Could not create pool connection. The DBMS driver exception was:java.sql.SQLException: ORA-24327: need explicit attach before authenticating a user - (user/********)--*****END ERROR******--

Also you don't have to have any additional 5.1.0 oracle kit here. WLS6.1
bundles the oracle drivers and the necessary libraries. can you check if
your path is pointing to the right bin folder for the 817 libraries.
sree
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]...
Hi Christine
Can you do a dbping from the machine where you start the wls server?
java utils.dbping ORACLE scott tiger servicename(as in tnsnames.ora)
sree
"christine" <[email protected]> wrote in message
news:[email protected]...
Thank you for your quick reply, Sree. Unfortunately, both the clientversion of
oracle and the classes12.zip that ships with that version are correct.
In
addition,
the service name is in the tsnames.ora file.
What is puzzling is that we used this same connectionpool/datasource/oracle/weblogic
configuration when running weblogic 6.0sp1 with no errors. The only
thing
that
has changed in our configuration is that we upgraded to weblogic 6.1.
Any other thoughts?
Thanks again in advance!
-Christine
"Sree Bodapati" <[email protected]> wrote:
Make sure you are using proper client version of the oracle client
software.
And the classes12.zip that ships that version.
And most importantly make sure you have the service name , in the
tnsnames.ora file in the oracle client folder <oracalhome>/network/admin.
hth
sree
"christine" <[email protected]> wrote in message
news:[email protected]...
Hello,I am getting the error listed when starting my weblogic serverafter
creating a connection pool and datasource through the weblogic (6.1)
console. I am currently using the jDriver 5.1.0 oracle kit. I used
this
kit previously with the WLS6.0sp1 installation and had no errors.Any
suggestions? Thanks in advance!-Christine--***** BEGIN
ERROR*******Starting Loading jDriver/Oracle .....-------- LOGIN
ERROR
CODE: 24327---------- LOGIN ERROR CODE: 24327<Aug 17, 2001 1:40:22 PM
EDT>
<Error> <JDBC> <Cannot startup connection pool "ConnPool"
weblogic.common.ResourceException:Could not create pool connection. The
DBMS
driver exception was:java.sql.SQLException: ORA-24327: need explicit
attach
before authenticating a user - (user/********)--*****END ERROR******--

Error message when I calling planning layout in the STS

Dear
I'm trying to use Status and Tracking System with BPS ( SEM 4.0 SP10, BW 3.5 SP14 ).
But I got some error messages when I calling planning layout in the STS screen..
I designed 2 lower unit(A,B) and 1 upper unit(C) for the test. and using Bottom-up work-flow.
I did
1. Create Planning Area in the BPS0 ( also Level, Package, Layout ..)
2. Created Web Interface in the Web Interface Builder using the upper BPS Layout .
3. Customizing STS
    - Create Sub Plan & Session
    - Asssign Hierarchy to Sub Plan
    - Determine attribute for created planning session ( Bottom-up, Auto mail )
    - Define Header characteristics for planning session to contains the planning package completely.
    - Determine Date, Person Responsible and Layout.
4. Send Start mail
5. Open STS Web Start Screen ( using B Unit responsible user .)
When he click "Open Planning" icon in the screen the following error messages were happened...
I've no idea for that because I didn't use any variables or offset settings.
I guess that comes from header settings for the planning session because when I deleted the header settings for the planning sessions, I could see the planning layout.
but I could not use lock processing in the STS.
Could you tell me what's happening to me?
[ Following error message ]
Correct the data on variables and offset in character string "?
Message Number UPC_FW092
Long Text Diagnosis
Character string "", which contains data on the variables and offset, has an invalid format, and cannot be converted.
Procedure
Correct the character string, so that it has the correct format. A correct entry on variable and offset has the following form:
<VARIABLE_NAME> [{ + | - } OFFSET]
Examples:
VAR0
VAR1+1
VAR2 - 2.
Also check whether the variable, that you want to use is available in the planning area.

Hello,
this seems to be a bug. The error message should include a variable name between ''. Since there is none, the function that raises the error was not called correctly.
It's not likely that this is related to STS since STS does not use variables at all. It's probably a problem with the layout. If you can't resolve it, please open a message to SAP Support.
Regards
Marc
SAP NetWeaver RIG

Error using PlanType3 only in Planning ver. 11.1.1.3

Similar Messages

Maybe you are looking for