ERROR When coonecting to SQL via DBCO Connections

Hi,
Error when connecting to SQL using DBCO connections. I am getting an dump as "Set up of a secondary connection to the database system failed. It is possible that the data required for setting up the connection via EXEC SQL (Native SQL)is faulty."
plaese help.
Thanks

Hi
Checking the dbsl_w<NN> as it is explained in point 3 of the 'Troubleshooting' section of [SAP Note 738371|https://service.sap.com/sap/support/notes/738371] would help a lot to know the reason of the failure.
It is most likely that, the information provided in DBCO are not complete/accurate
Regards
Raj

Similar Messages

Errors when trying to extract via UD Connect (BI 7.0)

Hi all,
in a BI 7.0 system I can't select any UD Connect source object on the "Extraction" tab page of the DataSource maitenance screen. If I type the table name (which is "DICTIONARY") into it and then hit the "Proposal" tab page, I get the following error:
Errors occurred during extraction of UD Connect object field-list: UDCADAPTERROR::RSSDK|200|Table: DICTIONARY not found
We had a restart of the system the weekend. Before that, I could easily select from the list of available UD Connect source objects (tables and views from the connected MS SQL Server) and the system showed correctly all fields of that object in the "Proposal" tab page.
I think there is a problem with the JDBC Connector in the J2EE server. How can I check, if the connection between the JDBC Connector and the connected database is working? Unfortunately I have no access to the Visual Administrator for the J2EE engine because I am not from the basis team.
Thanks to any answers in advance!
Best regards,
Philipp

Hi again,
I can precise the problems I have:
I'd like to extract data from a table in a MS SQL Server 2000 database named DICTIONARY. This table has the following columns:
DICTIONARYID (numeric(16,2), Not Null)
LANGUAGECODE (char(2), Not Null)
TYPE (varchar(24), Not Null)
VALUE (numeric(38,0), Not Null)
VALUENAME (varchar(48), Not Null)
DESCRIPTION (varchar(128), Not Null)
attr31 (numeric(16,2), Not Null)
attr32 (numeric(16,2), Not Null)
attr33 (numeric(16,2), Not Null)
attr34 (numeric(16,2), Not Null)
When starting the data extraction in the InfoPackage I get an error in the monitor. Deeper down in the J2EE server logs I get the following exception which is the reason for the error:
Date : 11/21/2006
Time : 8:53:48:452
Message : Exception: Value '30.00' cannot be converted to NUM type at field ATTR31
Severity : Error
Category :
Location : com.sap.ip.bi.sdk.datasource.beans.BI_SDK_Bean
Application : sap.com/com.sap.ip.bi.sdk.datasource.sync
Thread : SAPEngine_Application_Thread[impl:3]_10
Datasource : 238150750:/usr/sap/DOS/DVEBMGS23/j2ee/cluster/server0/BI_SDK_Trace.log
Message ID : 0014C2658003005E000000C0000041F5000422BD226B24FF
Source Name : com.sap.ip.bi.sdk.datasource.beans.BI_SDK_Bean
Argument Objs :
Arguments :
Dsr Component : DOS
Dsr Transaction : 456273935D18288AE1000000C72A309C
Dsr User : HINNAPHI
Indent : 0
Level : 0
Message Code :
Message Type : 0
Relatives :
Resource Bundlename :
Session : 0
Source : com.sap.ip.bi.sdk.datasource.beans.BI_SDK_Bean
ThreadObject : SAPEngine_Application_Thread[impl:3]_10
Transaction :
User : J2EE_GUEST
Actually there is a record that has 30.00 as value in the attr31 field. I think there are problems with the numeric(16,2) fields. I tried to use different data types in the corresponding fields of the UD Connect data source (e. g. DEC, FLTP) with different length and decimal places settings. But the exception is always the same (see above).
Another issue: I can only specify "Internal" for the format in the data source maintenance. If I use "External" or "Check" the system says: "External format not supported as data type is not 'CURR'".
Do you have any idea why this conversion exception occurs and what I could do about that?
Thanks to any answers in advance!
Regards,
Philipp

I get one or the other error when i install SQL server 2012 SP1 in my Lab server

I get multiple errors when i install SQL server 2012 SP1 In my lab server.
Not sure why i keep getting different errors all the time when i install SQL server 2012 & 2012 SP1.
Below are error codes, screen shots and also a log of the error.
1. Eror code 0X84B40000
Also dint understand any thing from this article related to the above error
http://social.technet.microsoft.com/Forums/sqlserver/en-US/5b6cc928-0db8-4fe4-a5d3-21672225f0ca/i-get-error-code-0x84b40000-when-trying-to-install-sql-server-mgmt-studio-to-an-existing-sql?forum=sqlexpress
2. Eror code 0x851A001A
Can any one plz help as i always get one or the other error.
====================================
Screen shot:
Please note the below screen shot has given the error code 0x851A001A which is same in case of failure of all the other features which have failed during this installation. Hence i have uploaded only one screen shot.
2. Log file content.
=================================
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-04 21:15:35
End time: 2014-05-04 21:51:45
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SERVER1
Machine processor count: 2
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Basic
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Complete
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools SDK
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Integration Services
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: ms\sql
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SCOM
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SCOM
INSTANCENAME: SCOM
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SCOM
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: ms\sql
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: MS\Gautam, MS\SCOM Users
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
Detailed results:
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\SystemConfigurationCheck_Report.htm

Sorry about the error in the path, but you find the files that's the main thing.
Indeed it is a certificate problem:
2014-05-04 21:47:43.56 spid12s Error: 17190, Severity: 16, State: 1.
2014-05-04 21:47:43.56 spid12s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-05-04 21:47:43.56 spid12s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17826, Severity: 18, State: 3.
2014-05-04 21:47:43.57 spid12s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-05-04 21:47:43.57 spid12s Error: 17120, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I've recall that I've tried to help people with this error before, but I'm sure they were able to sort it out.
Anyway, this blog post,
http://blogs.msdn.com/b/sqljourney/archive/2012/10/09/sql-2008-service-fails-to-come-online-with-a-valid-certificate-could-not-be-found-and-it-is-not-possible-to-create-a-self-signed-certificate.aspx
suggests the issue is a corrupted user profile, and you should try to use a different service account.
This blog also seems to have a simple solution, but I cannot vouch for that it will work:
http://www.beejblog.com/2012/02/sql-server-solved-unable-to-initialize.html
Erland Sommarskog, SQL Server MVP, [email protected]

ORA-06502: error when inserting into table via db link with long datatype

Folks,
I am getting the following error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small.
This occurs when an insert is done via a database link into a table that has a LONG data type for one of the columns, and the string contains some carriage returns and or line feeds.
I have checked by removing the db link, and inserting into a local table with identical column data types, where there is no error.
So this might be another db link bug?
So I need to remove the carriage returns and/or line feeds
in my pl/sql block in the page process. I have tried
l_text := REPLACE(l_text, CHR(10), ' ');
l_text := REPLACE(l_text, CHR(13), NULL);
but still getting the ORA-06502. Would really appreciate some advice here, please.
Cheers
KIM

Scott,
Time to 'fess up':
My fault sorry, the error was coming from another page process where I had allowed insufficient string length for one of the variables, and my error message did not identify the page process clearly.
This leads me to make a request for future releases, could the system error messages state which page process caused the problem?
One other thing I notice, and this might be a feature not a fault, the page processes are numbered: "Page Process: 3 of 5". However process 3 is not the 3rd one to be processed, and probably refers to the order in which they are created. Should the number reflect the process order?
Cheers
KIM

ODBC Error when migrating from SQL Server 2008 to SQL Anywhere 12

Hello community,
i have the following requirement:
I need to migrate a Database with some Demo data into a SQL Anywhere 12 Database. The SQL Anywhere 12 Database is part of the SAP BusinessObjects Enterprise XI 3.1 SP7 installation and came with the same as OEM Product.
The Environment looks like the following:
DB1 is a MS SQL Server 2008 R2 64 Bit running on Windows Server 2008 R2 64 Bit.
DB2 is the SAP BusinessObjects Enterprise XI 3.1 SP7 installation with the shipped SQL Anywhere 12 (12.0.1.3873) Database running on SLES 11.3 64 Bit
CL1 is my Windows 7 64 Bit Client where Sybase Central is installed in 64 Bit. On CL1 i have a 64 Bit System ODBC Connection connecting to DB1 successfully.
Basically i followed the following (pretty straight forward) tutorial:
Migrating a SQL Server Database to SQL Anywhere White Paper-Technical: Mobile Enterprise, Database Management iAnywhere …
When i want to test the connection from inside Sybase Central (During the migration process) i receive the following error:
From inside Sybase Central my connection looks as follows:
And from the ODBC Manager the connection looks as follows:
Personally i found is strange that the Sybase ODBC Driver Manager drops the error. I would expect that the MS SQL ODBC Driver Manager pops the error it its related to the ODBC DSN to DB1.
Any ideas?
Thanks and Regards
-Seb.

Hi Sebastian,
The data from the SQL Server database must be migrated to an existing SQL Anywhere database. Could you please tell me where this SQL Anywhere database resides and how are you connecting to it?
The error message is saying that the connection to the SQL Anywhere remote database server is failing, as opposed to the connection to the SQL Server database.

Errors when trying to get a Database connection

We resolved the JSP page not found issue and now the Iview seems to be able to access the JSP page . Now we are getting a Portal runtime error when we try to access the Iview :
An exception occurred while processing a request for :
iView : pcd:portal_content/HistPerf
Component Name : ProfitAnalysis.HistoricalPerformance
invalid arguments in call.
#1.5#0007E904947000400000027600000A680003ED6C4B216995#1105474302842#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#Administrator#271##LABTEST01_P66_4818350#Administrator#77dbe2d0640a11d9a50f0007e9049470#SAPEngine_Application_Thread[impl:3]_17##0#0#Error#1#/System/Server#Java###Exception ID:12:11_11/01/05_0008_4818350
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/HistPerf
Component class : jsp._sapportalsjsp_maxager
User : Administrator
     at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:627)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:232)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:153)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:337)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:315)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:815)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:238)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:151)
Caused by: com.sapportals.portal.prt.component.PortalComponentException: Original exception:
     at jsp._sapportalsjsp_maxager.doContent(_sapportalsjsp_maxager.java:250)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     ... 29 more
Caused by: java.sql.SQLException: invalid arguments in call
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
     at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:1160)
     at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:183)
     at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:346)
     at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:468)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:314)
     at java.sql.DriverManager.getConnection(DriverManager.java:512)
     at java.sql.DriverManager.getConnection(DriverManager.java:171)
     at com.maxager.pct.profitanalysis.util.DatabaseUtilities.getConnection(DatabaseUtilities.java:103)
     at com.maxager.pct.profitanalysis.util.DatabaseUtilities.getConnection(DatabaseUtilities.java:38)
     at com.maxager.pct.profitanalysis.util.User.init(User.java:44)
     at jsp._sapportalsjsp_maxager.doContent(_sapportalsjsp_maxager.java:108)
     ... 32 more
#1.5#0007E904947000400000027800000A680003ED6C4B217317#1105474302842#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#Administrator#271##LABTEST01_P66_4818350#Administrator#77dbe2d0640a11d9a50f0007e9049470#SAPEngine_Application_Thread[impl:3]_17##0#0#Info##Plain###UserAgentHook: component com.sap.portal.runtime.system.hooks.ErrorComponent supports (*, *, *) #
#1.5#0007E904947000400000027900000A680003ED6C4B217683#1105474302842#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#Administrator#271##LABTEST01_P66_4818350#Administrator#77dbe2d0640a11d9a50f0007e9049470#SAPEngine_Application_Thread[impl:3]_17##0#0#Info##Plain###------PRT AbstractPortalComponent: calling doContent for portal component: com.sap.portal.runtime.system.hooks.ErrorComponent#
Can anyone offer any help on this problem ?
Thanks
Ravi

Hi Ravi,
The problem could be because of a wrong JDBC url or user id or password. Check whether the entries are the correct one.
Check out "java.sql.SQLException: invalid arguments in call" in google.
Regards,

Error when running a .sql file

hello all.
i keep getting an error when i try to install sample schemes for APEX on XE.
I was wondering if any could help
thank you:)
================
================
SQL> @oehr_sample_objects_installer.sql
APPLICATION 543 - OEHR Sample Objects
Set Credentials...
Check Compatibility...
API Last Extended:20090112
Your Current Version:20090112
This import is compatible with version: 20060224
COMPATIBLE (You should be able to run this import without issues.)
Set Application ID...
begin
ERROR at line 1:
ORA-02291: integrity constraint (APEX_030200.WWV_FLOWS_FK) violated - parent
key not found
ORA-06512: at "APEX_030200.WWV_FLOW_API", line 555
ORA-06512: at line 3
Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - Produ
ction
C:\TEMP\apex>

i went to that link and tried to insert MOS Doc 949429.1
as a support identifier and it does not recognize it.
i tried just 949429.1 and 949429 and still success.
what is the right code for this support identifier?
thank you :)

Error when refreshing WEBI report with Universe Connection Type "SSO"

Hi Experts:
We are trying to refresh the Webi report in Infoview with Universe Connection set as "Use Single Sign On when refreshing the report at view time", so that we can leverage SAP OLAP authorization variable from Bex Query which the Universe is built on.
However got the error of "incomplete logon data" after all the configurations done following below blogs:
SNC Part 1
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-1-of-2
SNC Part 2
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-2-of-2
We already have Win AD SSO to SAP setup, and in BO CMC, Win AD user is mapped to SAP user ID.
The SNC settings are:
- AD Account: service.test.bobj (all lower-letters)
- 32-bit gsslib on the BO server, and 64 bit on the BW server side.
- SNC0: p:service.test.bobj at DOMAIN
- SU01 --> BO_Service ; SNC: p:service.test.bobj at DOMAIN
- Entitlement system tab --> username: BO_Service
SNC Name: p:service.test.bobj at DOMAIN
- SNC settings tab:
SNC Lib: c:\winnt\gsskrb5.dll
Mutual Authentication settings: p:SAPServiceBP0 at DOMAIN
In CMC, the role can be imported if "RFC activated" option unchecked in SNC0.
I found a few threads on the same topic, but they are all not answered:
SNC Client side configuration error
SNC Configuration Error: Incomplete logon Data
Can you please provide details of the solution if you have impleted a same scenario successsfully, or any thoughts to help the investigation?
Thanks in advance!
Regards,
Jonathan

Hi Ingo,
Sorry for taking so long to reply, we are trying to set up server side trust and enable SSO; but we still couldn't success.
What we did is:
1. We followed installation guide chapter 6, generate certificate and PSE, etc. All looks good.
2. Then we still have the "incomplete logon data" error when refreshing webi report after logon using Windows AD user ID.
3. Then we trace the PFC connection, the log is as below. We checked several BO notes, e.g. 1500150, 1461247.. The part bothers us is that we even don't have URI displayed in the log when system trying to use SNC, and we couldn't get more info on this which make us very difficult to diagnosis.
Can you please help? Thanks a lot!
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SNC. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Unable to authenticate using SNC because the URI does not meet the minimum connection requirements.
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SSO. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: The SAP SSO authentication process will fail because the SAP secondary credential are not properly updated and the password is blank.
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Trying to connect to SAP using this URI : occa:sap://;PROVIDER=sapbw_bapi,R3NAME=PB0,GROUP=BI_Group1,MSHOST=sapaupdb04,LANG=en,CLIENT=100,CATALOG="ZSPUM602",CUBE="ZSPUM602/ZSPUM602_Q50"
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Calling m_pRfcWrapper->RfcOpenEx() ...
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: RfcOpenEx(...) returned 0
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Call to m_pRfcWrapper->RfcOpenEx() took 0.141 seconds
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: SAPAuthenticationService::~SAPAuthenticationService

Error when upgrading from SQL Server 2005 to SQL Server 2014

Hello everyone,
Could you help me, i have an error when i try to upgrade my SQL Server 2005 Enterprise Edition to SQL Server 2014 Enterprise Edition,
All of prerequisits are available and i dont have a problem,
before the end of migration process, i have this error: The group name could not be found (0x84BB0001)
File log:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: The upgrade process for SQL Server failed. To continue the upgrade process, use the following information to resolve the error. Next, uninstall SQL Server by using this
command line: setup /q /action=uninstall /instanceid=MSSQLSERVER /features=SQLENGINE,FULLTEXT,REPLICATION. Then, run SQL Server Setup again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x84BB0001
Error description: The group name could not be found.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x0AD059E6%400x3FAAA006&EvtType=0x0AD059E6%400x3FAAA006
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: The upgrade process for SQL Server failed. To continue the upgrade process, use the following information to resolve the error. Next, uninstall SQL Server by using this
command line: setup /q /action=uninstall /instanceid=MSSQLSERVER /features=SQLENGINE,FULLTEXT,REPLICATION. Then, run SQL Server Setup again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x84BB0001
Error description: The group name could not be found.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x0AD059E6%400x3FAAA006&EvtType=0x0AD059E6%400x3FAAA006
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: The upgrade process for SQL Server failed. To continue the upgrade process, use the following information to resolve the error. Next, uninstall SQL Server by using this
command line: setup /q /action=uninstall /instanceid=MSSQLSERVER /features=SQLENGINE,FULLTEXT,REPLICATION. Then, run SQL Server Setup again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x84BB0001
Error description: The group name could not be found.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x0AD059E6%400x3FAAA006&EvtType=0x0AD059E6%400x3FAAA006
Best regards,
Guiga Hafedh

There are more detailed logs for the various components. The one of interesting is the one for the engine or possibly the one for full-text.
These logs are extremely verbose, and the errors are rarely crystal clear, but at least give them a try. If you have problems, find a place to upload them (Dropbox, Skrydrive etc), so that we can look.
The closest at hand is that "group" that cannot be found is an AD group.
Erland Sommarskog, SQL Server MVP, [email protected]

Notification Error when using PL/SQL document

I have a notification that calls a procedure that returns some HTML body of the email. It worked once, but now I get the error below. In Oracle Apps on the notification tab the notification shows correctly, it's the actual sending of the email that is failing.
Thank you for any help you may be able to provide,
Blake
[WF_ERROR] ERROR_MESSAGE=3835: Error '-20002 - ORA-20002: 2018: Unable to generate the notification XML. Caused by: 2020: Error when getting notification content. Caused by: sqlerrm wf_notification.GetAttrDoc2(123387, NOTIF_BASIC_INFO_DOC, text/html) Wf_Notification.GetAttrDoc(123387, NOTIF_BASIC_INFO_DOC, text/html) Wf_Notification.GetText(123387, text/html) Wf_Notification.GetBody(123387, text/html) WF_NOTIFICATION.GetFullBody(nid => 123387, disptype => text/html) WF_MAIL.GetLOBMessage3(nid => 123387, r_ntf_pref => MAILHTML)' encountered during execution of Generate function 'WF_XML.Generate' for event 'oracle.apps.wf.notification.send'. ERROR_STACK= WF_MAIL.GetLOBMessage3(123387, WFMAIL, 2020: Error when getting notification content. Caused by: sqlerrm wf_notification.GetAttrDoc2(123387, NOTIF_BASIC_INFO_DOC, text/html) Wf_Notification.GetAttrDoc(123387, NOTIF_BASIC_INFO_DOC, text/html) Wf_Notification.GetText(123387, text/html) Wf_Notification.GetBody(123387, text/html) WF_NOTIFICATION.GetFullBody(nid => 123387, disptype => text/html) WF_MAIL.GetLOBMessage3(nid => 123387, r_ntf_pref => MAILHTML), Step -> Getting text/html body) WF_XML.GenerateDoc(oracle.apps.wf.notification.send, 123387) WF_XML.Generate(oracle.apps.wf.notification.send, 123387) WF_XML.Generate(oracle.apps.wf.notification.send, 123387) Wf_Event.setMessage(oracle.apps.wf.notification.send, 123387, WF_XML.Generate) Wf_Event.dispatch_internal()

I am getting the following error ie
WF_ERROR] ERROR_MESSAGE=3835: Error '-20002 - ORA-20002: 2018: Unable to generate the notification XML. Caused by: 2020: Error when getting notification content. Caused by: ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06512: at "SYS.HTP", line 1557 ORA-06512: at "SYS.HTP", line 1735 ORA-06512: at "APPS.HR_UTIL_DISP_WEB", line 3519 ORA-06512: at "APPS.XX_HR_MDA_AUDIT_VIEW_WEB", line 2077 ORA-06502: PL/SQL: numeric or value error: character string buffer too small Wf_Notification.GetAttrClob(2648602, XX_HR_REVIEW_DO' encountered during execution of Generate function 'WF_XML.Generate' for event 'oracle.apps.wf.notification.send'. ERROR_STACK= WF_MAIL.GetLOBMessage3(2648602, WFMAIL, 2020: Error when getting notification content. Caused by: ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06512: at "SYS.HTP", line 1557 ORA-06512: at "SYS.HTP", line 1735 ORA-06512: at "APPS.HR_UTIL_DISP_WEB", line 3519 ORA-06512: at "APPS.XX_HR_MDA_AUDIT_VIEW_WEB", line 2077 ORA-06502: PL/SQL: numeric or value error: character string buffer too small Wf_Notification.GetAttrClob(2648602, XX_HR_REVIEW_DOC_ATTR, text/html) Wf_Notification.oldGetAttrClob(2648602, XX_HR_REVIEW_DOC_ATTR, text/html) WF_NOTIFICATION.GetFullBody(nid => 2648602, disptype => text/html) WF_MAIL.GetLOBMessage3(nid => 2648602, r_ntf_pref => MAILHTML), Step -> Getting text/html body) WF_XML.GenerateDoc(oracle.apps.wf.notification.send, 2648602) WF_XML.Generate(oracle.apps.wf.notification.send, 2648602) WF_XML.Generate(oracle.apps.wf.notification.send, 2648602) Wf_Event.setMessage(oracle.apps.wf.notification.send, 2648602, WF_XML.Generate) Wf_Event.dispatch_internal()
At line 2077 in "APPS.XX_HR_MDA_AUDIT_VIEW_WEB" the code is :
WHEN others THEN
hr_util_disp_web.display_fatal_errors
(p_message => g_package_name||'.display_detail - '||sqlerrm||' '||sqlcode);
At line 3519 in "APPS.HR_UTIL_DISP_WEB" the code is :
l_session_id := icx_sec.getid(icx_sec.pv_session_id);
htp.p('<HTML>');
htp.p('<HEAD>');
htp.p('</HEAD>');
htp.p('<BODY>');
htp.p('<SCRIPT language="JavaScript">');
htp.p('window.location="hr_util_disp_web.display_fatal_error_form?'
||'p_message='||icx_call.encrypt2(p_message, l_session_id)
||'"');
htp.p('</SCRIPT>');
htp.p('</BODY>');
htp.p('</HTML>');
Any inputs on how to debug it.
Edited by: user12010068 on Dec 10, 2009 3:59 AM

Error when run Process Chain via BPC NW

Hi Gurus,
I am implementing SAP BPC 7.5 NW in a customer and I´m facing the following error when try to run a process chain via Data Manager: "Failed to analyze instruction ,TAB,%TAB% ".
Here is the scenario: we created a process chain that will be able to capture values recorded in a BPC application, load them into an DSO (make some transformations there) and finally send those transformed values to an specific table at ECC. This process will be started after some simulations at BPC and, when the user ends its simulation, start this process chain via BPC; this process chain is named as PC_ECC.
We made a copy of /CPMB/DEFAULT_FORMULAS and named it PC_FORMULA and, before step /CPMB/CLEAR, I assigned my process chain PC_ECC.
So, at Data Manager, I add this process chain (PC_FORMULA) and in Advanced button, I put this statement:
INFO(%EQU%,=)
INFO(%TAB%,;)
TASK(PC_FORMULA,TAB,%TAB%)
TASK(PC_FORMULA,EQU,%EQU%)
TASK(PC_FORMULA,SUSER,%USER%)
TASK(PC_FORMULA,SAPPSET,%APPSET%)
TASK(PC_FORMULA,SAPP,%APP%)
//TASK(PC_FORMULA,LOGICFILENAME,DEFAULT.LGF)
//TASK(PC_FORMULA,REPLACEPARAM,TESTE3%EQU%%TESTE3%%TAB%ASARENT%EQU%%ASARENT%%TAB%SOURCE%EQU%%SOURCE%%TAB%TARGET%EQU%%TARGET%)
As we do not have any script logic to be executed, we commented the two last statements.
When we run this package via DM, it gives us the message error: "Failed to analyze instruction ,TAB,%TAB% "
Looking through SDN forum we found two posts similar to this issues:
But the suggestion to supress the statement TASK(PC_FORMULA,TAB,%TAB%) do not work; when we comment this statement, the message error gives us the message:"Failed to analyze instruction ,EQU,%EQU% "; when we comment the statement TASK(PC_FORMULA,EQU,%EQU%) and the previous (with TAB). the DM gives us the message: TASK(PC_FORMULA,SUSER,%SUSER%) and so on, until nothing has left to comment.
Anyone of you view or has some similar case of error?
Thanks in advance to you all
Best Regards
Adriano

Hi Rich,
Thanks for your answer.
I checked the parameter at my process chain and it has a variant (/CPMB/DEFAULT_FORMULAS_LOGIC) with the parameters:
TAB
SUSER
SELECTION
SAPPSET
REPLACEPARAM
MEMBERSELECTION
LOGICFILENAME
EQU
So, when I put in the task PC_FORMULA, TAB, %TAB%, it will be able to be recognized by the task...and the other parameters too. And when I take one of them off the task instructions, the system complains.
Any other suggestion?
Once again, thanks..a.nd best regards
Adriano

Error when sending infotype 2 via ALE - start date

Hi all,
we are facing the following error when using the standard method for HR distribution: changes in infotype 2 cannot be processed in the receiving system; each change results in a 51 error in the iDoc, with message "PA0002 could not be updatedu201D (msg number 5-108).
For some background: we're using message type HRMD_A06 and the standard configuration as described in the "ALE Quickstart" document. We've sent the full set of employee data via report RHALEINI, and use RBMDIDOC and change pointers to send changes on a daily basis. All infotypes are updated correctly except 2.
From our tests, it seems that the problem is the following:
- the initial send via RHALEINI created infotype 2 records with start date 01.01.1900. The sent iDocs had at the level E1P1TYP for infotype 2, start date 01.01.1800
- the daily report RBMDIDOC is sending the infotype 2 records with their real start date (i.e. birthdate of the employee). Since this is later than 01.01.1900, the replacement of one infotype by another in the receiving system fails. By manually changing the start date of infotype 2 in the receiving system, the next update is successful --but we do not want to manually update all records in the receiving system.
Has anyone else faced this or a similar issue with RHALEINI and infotype start dates?
Thanks in advance,
Mariana
Edited by: Mariana Lasprilla on Feb 5, 2009 10:35 AM

The mystery has been solved: customer system had a conversion rule for message type HRMD_A in order to send a fixed value of BEGDA for all infotype 2 records.
ALE conversion rules are set via table TBD30.

Error when creating Logical Port via WSDL on SOAMANAGER

Hi,
When creating Logical Port via WSDL on SOAMANAGER we're getting the following error:
"Uninstantiated object u201Csubject sidl serviceu201D in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL".
We're consuming a WS provided by a .NET application.
Our system is ECC 6.0 NW 7.01SP 7.
Anyone have faced this error before?.

hI,
Please go through this link , you will get the solution
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/20eb3174-41ab-2a10-a383-907faf60eed3

Error when compiling pl/sql in JDEV 11g

db version: 9.2.0.6.0
JDEV version : 11.1.1.0.2
Whenever I click compile on a pl/sql package body from Jdev I get the following error:
An error was encountered performing the requested operation:
ORA-904: "ATTRIBUTE": invalid identifier
00904.00000 - "%s: invalid identifier"
*cause
*action
vendor code 904
even though the package itself compiles successfully.. any clues why this keeps happening, are the 2 versions not compatible?
Will

does any one else get this when doing pl/sql dev on JDEV 11g?

SSL error when IE 4.72 tries to connect to webserver

At least one 40-bit browser (IE 4.72) is producing this error
when trying to connect using SSL to webserver:
[11/Dec/2001 15:37:23 08295] [trace] OpenSSL: Loop: SSLv3 read
client hello A
[11/Dec/2001 15:37:23 08295] [trace] OpenSSL: Loop: SSLv3 write
server hello A
[11/Dec/2001 15:37:23 08295] [trace] OpenSSL: Loop: SSLv3 write
certificate A
[11/Dec/2001 15:37:23 08295] [trace] OpenSSL: Loop: SSLv3 write
server done A
[11/Dec/2001 15:37:23 08295] [trace] OpenSSL: Loop: SSLv3 flush
data
[11/Dec/2001 15:37:23 08473] [trace] OpenSSL: Exit: error in
SSLv3 read client certificate A
[11/Dec/2001 15:37:23 08473] [trace] OpenSSL: Exit: error in
SSLv3 read client certificate A
[11/Dec/2001 15:37:23 08473] [error] SSL handshake interrupted by
system [Hint: Stop button pressed in browser?!] (System error
follows)
[11/Dec/2001 15:37:23 08473] [error] System: Connection reset by
peer (errno: 131)
Have not been able to reproduce it on other browser versions yet.
No 128-bit browsers have gotten this error.
I'm using iAS 1.0.2.2.
My certificate from Verisign is 128-bit with step-down to 40-bit
for Export security browsers.

I had the same problem. In my case, Forms with SSO over SSL worked from the intranet, but not from the internet over the firewall. In the FW log, I found requests from my browser to the iAS at port 7778, on which runs the middle tier iAS, but that is blocked by the FW (we use WebCache at port 80 as a proxy).
Last time the ssoreg from the middle tier ran with -mod_osso_url http://<server_name>:7778, as indicated by the ssoreg.log. I reregistered the middle tier by means of ssoreg with -mod_osso_url http://<server_name>:80, restartet the http server from the middle tier, it corrected the error.

ERROR When coonecting to SQL via DBCO Connections

Similar Messages

Maybe you are looking for