Error when executing query in the Web Analyzer...

Hi All,
I am using 2004s and when I try to execute the query in the BEX browser I get the following error. It works well in the Bex analyzer. Do I need to have some java plug ins for this to work?
http://bi6.domain.com:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex%3FQUERY
Thanks,
Arthur.

you mwy check this to trouble shoot front end
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation

Similar Messages

Runtime Error when executing Query in the web

Hello,
when i try to execute a query on the web, i get the error
Exception in BI runtime
Log ID: 005056BD15DA005E000000A900000A3400043C8F00E4DD8B
Initial cause
Message:
'user' missing
Stack trace:
com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'user' missing
Message:
No connection possible to BI master system VB0CLNT800
Stack trace:
com.sap.ip.bi.base.service.connection.ConnectionException: No connection possible to BI master system VB0CLNT800
Can anyone please tell me , how to fix this ..
Thanks
Raj

you mwy check this to trouble shoot front end
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation

Error when executing query without passing variable selection

Hi Gurus
I am getting an error while executing a query with out passing values for variables
When executing the query by passing the filter values report returns the data
When executing the query with out passing variable selections the error message is
Unknown error in SQL interface
Error reading the data of Info Provider ZCRM_O08
Error while reading data; navigation possible
System error in program SSAPLRS_EXCEPTION and form
RS_EXCEPTION_TO_MESSAGE
No Data Available
can any one please help me in resolving this
Thank you

Hi Srini
Thanks for your quick response
When i am executing the query with selection it is returning the data
giving error when executing with out passing the selection
is there any other cause for this problem
like any particular info object causes this sort of problem
Thank you

Profile Parameter : Time out for executing query on the web

Hi gurus,
I am executing queries on the web directly. This can be done from query designer with the button that says "Execute query on web". The problem is that for queries that take more than 600 Secs to run, I get an Application timed out error. Queries that take less than this run smoothly.
Can anyone please tell me the profile parameter associated with this particular setting. It is not rdisp/max_wprun_time, I know for sure since the value for this profile parameter in my system is 9999. Please help.
Thanks & rgds,
Sree

Issue resolved.
Profile Paramter - icm/server_port_0
Current Value - PROT=HTTP,PORT=8000,TIMEOUT=60,PROCTIMEOUT=600
Changed to - PROT=HTTP,PORT=8000,TIMEOUT=60,PROCTIMEOUT=3600
rgds,
Sree

Problem When executing chart in the Web

Hi all,
I am getting the following error when executing a chart in the Web.
Diagnosis
Internal error when communictaing with the IGS (charts).
System response Internal error text: "Error opening an RFC connection."
Procedure
Procedure for System Administration
Notification Number RSWWW 005
Thanks.

Hi,
this looks like your IGS has crashed and somehow needs to be restarted. I also assume that the IGS patchlevel is old in comparison to the newest version in the Service Marketplace.
Please update the IGS (which includes a restart) or ask your basis team to upgrade the IGS.
FYI: Note <a href="http://service.sap.com/sap/support/notes/931900">931900</a> describes how to discover the IGS patchlevel even when it is not running.
Regards
Matthias

Load oracle jdbc driver error when run applet via the web

Hi All,
I have built an applet which connect to database via jdbc thin driver. It works fine when I run it through the applet viewer, but got a problem when run it through the web.
java.lang.NoClassDefFoundError: oracle/jdbc/driver/OracleDriver
I am using jdev9i 9.0.4 and jdk 1.4.2. The jdbc version is 9.0.1
I have added both the classes12.zip and ojdbc14.zip in the class path and also pack them together with my applet class. Here is the code
public class MyApplet extends Applet
implements Runnable
public void start()
if(theThread == null)
theThread = new Thread(this);
theThread.start();
Retrieve R = new Retrieve();
this.MyMap = R.retrieveDesc();
public class Retrieve
public Retrieve()
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
conn=DriverManager.getConnection("jdbc:oracle:thin:@babyruth.wvu.edu:1703:devdw", User, Password);
conn.setAutoCommit(true);
connectStatus = true;
public HashMap retrieveDesc()
return map;
I have also built one HTML page NewApplet like this
<HTML>
<HEAD>
<TITLE> My New Applet</TITLE>
</HEAD>
<APPLET CODE="MyApplet.class" CODEBASE="menu" ARCHIVE="MyApplet.zip" WIDTH=300 HEIGHT=485>

<param name="bgcolor" value="255,255,255">
</HTML>
Any advice is highly appreciated
Mei

Sir,
Well you haven't "packed" them correctly. Why don't you just add the driver bits to the soucebase tag? or something like that anyway...
Sincerely,
Slappy

500 Server Error when executing Query in Portal

When I run a query in the ABAP Web all the components (the pulldowns) work as well as the query executes.
When I run the query in the Java WebI get a 500 Internal Server Error
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
ABEND BRAIN (299): System error in program BICS_PROV_GET_INITIAL_STATE and form Variables are not submitted (see long text)
MSGV1: BICS_PROV_GET_INITIAL_STATE
MSGV2: Variables are not submitted
We are using Netweaver 7.0 sp 13.
Any help is appreciated.... Point rewarded !!!
Mike

Yes I get that and it has been installed and everythign is worked awesomly. I can export queries to the portal. SSO, SSL and the whole bit it installed.
The nwa default trace tool doesn't give me much to go on. Err looks like i described it above however it says its in
Category: /Applications/BI
Location: com.sap.ip.bi.base.application.message.impl.MessageBase
Application: sap.com/irj
The other err is in
Category: /Applications/BI/Application_Framework
Any ideas of where I should look?

Error when executing query its urgent

hi,
when iam executing my query in query designer through web morning i got the result in web.
but when iam executing the same query in wad it is throughing an error like (System error in program SAPLRRK0 and form GET_FIELD_POSITION-01-))
now again i check that one in querydesigner again it is showing the same error in querydesigner also
vijay

Hi,
Refer Note 931975 - Problems when you execute a query
Symptom
At runtime, a query contains a generated ABAP program and a data structure, which is stored in the shared buffer. Due to the gap described here, the version of the ABAP program may not correspond to the version of the data structure.
This causes several terminations when you execute this query:
X299 Brain SAPLRRK0; Form GET_FIELD_POSITION-01-,
X299 Brain SAPLRRK0; Form APPEND_KHANDLE_1-02-,
ASSIGN COMPONENT L_FIELDNAME OF STRUCTURE C_SX_GVAR, and others.
Other terms
RSIX, SX_REPORT,
Reason and Prerequisites
The error can occur if one person changes a query and another person simultaneously executes the query. A query may also be changed implicitly if one of the objects used in the query is changed in another query.
Solution
The attached corrections apply only to Releases 3.X. An advance correction cannot be provided for NetWeaver 2004s.
Before you implement the attached correction (in 3.X), you must change the two following method interfaces. Otherwise syntax errors occur in the CL_RSR_REPORT_RSIX class and the RRI0 function group when you implement the corrections.
1. In Transaction SE24: Change the MODIFY method of the CL_RSR_REPORT_RSIX class as follows:
              Insert the I_S_RKB1D import parameter with the type RSR_S_RKB1D.
2. In Transaction SE24: Change the READ_SX_REPORT method of the CL_RSR_REPORT_RSIX class.
              Delete all existing import parameters (that is, I_GENUNIID, I_DVERS, I_IDVERS and I_GENTIME) and insert the I_S_RKB1D import parameter with the type RSR_S_RKB1D.
After you implement the corrections, you must delete the incorrect information in the shared buffer. To do this, enter '/$SYNC' in the command field in every application server. Alternatively, you can also call RSRT -> Environment -> Generate Queries. As a result, all queries are regenerated but all OLAP caches are rejected.
BW 3.0B
           Import Support Package 31 for 3.0B (BW 3. 0B Patch 31 or SAPKW30B31) into your BW system. The Support Package is available when Note 0872272 "SAPBWNews BW 3.0B Support Package 31", which describes this Support Package in more detail, is released for customers.
BW 3.10 Content
           Import Support Package 25 for 3.10 (BW 3. 10 Patch 25 or SAPKW31025) into your BW system. The Support Package is available when Note 0872274 "SAPBWNews BW 3.1 Content Support Package 25", which describes this Support Package in more detail, is released for customers.
BW 3.50
           Import Support Package 17 for 3.5 (BW 3. 50 Patch 17 or SAPKW35017) into your BW system. The Support Package is available when Note 0872277 "SAPBWNews BW Support Package 17 NetWeaver'04 Stack 17", which describes this Support Package in more detail, is released for customers.
SAP NetWeaver 2004s BI
           Import Support Package 08 for SAP NetWeaver 2004s BI (BI Patch 08 or SAPKW70008) into your BI system. The Support Package is available when Note 0872280 "SAPBINews BI 7.0 Support Package 08", which describes this Support Package in more detail, has been released for customers.
           In urgent cases, you can use the correction instructions.
To provide information in advance, the notes mentioned above may be released before the Support Package is available. In this case, however, the short text of the notes still contains the words "preliminary version".
Thanks

Error when executing a report in Bex analyzer"

Hi all ,
when I am executing a report in Bex analyzer and selecting a hierrachy and execute the report it is giving an error " in Program CL_RSR_RRKO_HIERARCHY and Form SEL_TO_SELDR_EQSID.Any reason for this.
thanks
Rao

Hi,
go to RSSM and give your infoprovider name and check the authrization objects which are present in the infoprovider ...it will have option ticked.
Basically authorizations are based on company code or sales org.
give that authorization object in the first option in RSSM and check on which infoobject it is based.
Also you can give your user id in one of the option in this transaction RSSM and then you can check for that authorization object do you have any values present for the included infoobjects or not.
You will not have those values entry here in the authorization object for those selections which you are giving during the report run.
Just change the vales here and give the desired value for which you are running the report.
Save it.
Hope it helps
Thanks
Message was edited by:
Ajeet

Calculated keyfigures not defined correctly error when executing query

Hi Experts,
I changed calculations in the calculated keyfigures and saved successfully.
when I execute the query in BI7 Bex, I am getting errors like query element not defined correctly in the query. when I look into query in the designer its giving info messages for many calculated keyfigures saying reusable and saving can influence other queries.
I reverted back the changes but the errors still coming up. I tried to copy the query and run it ..still didnt helped..
Please suggest me with the solution..
Quick replies are much appreciated and awarded.
Thanks
Vanaja

Hi,
The calculated keyfigure is the difference of two other calculated keyfigures...
I tried to re-drag and drop into keyfigures column and didn't worked and still getting the errors.
Please suggest some more..
Thanks
Vanaja

Error when executing planning application in Web

Hi everyone,
When executing a planning function in BEx Web, via Web Application Designer, I am getting the following error message.
ABEND BRAIN (178): Common entries are not permitted for plan queries and input queries
MSGV1: Aggregation level name
Where do I go wrong?
Thanks in advance, hope this is enough info.

Have you considered creating a characteristic relationship with an EXIT Class. In this way you are able to make the value whatever you want according to the rules you code.

Error,when executing "contents in the cube & a report in the bex analyser"

Hi,
If i execute a cube contents,i am getting this message "System error in program CL_RSR and form GET_PROVID-02- (see long test)" , due to this error data has not appeared,only structure appeared in the cube.
When we execute a query in the BEX, we got the message "System error in program CL_RSR and form GET_PROVID-02- (see long test)"
Please let us know what can be the problem and the solution.
Thanks in advance and best regards.
kumar.

Hi Dhanya,
thanks for your quick response,
it is helping more for me,
but i have some query's for this.
ie i made proper installation for activation 0infoprov(BusinessContent info objective) at BI Content Level. but it appears as inactive mode at modeling level. when,i made activation of 0infoprov, it is asking "0LOGSYS" must be an attribute, but i given "0LOGSYS" as attribute for this 0INFOPROV, however it shows some other errors at the time of activation, it appears as Inactive mode only, means it is not activating at this modeling level.
At the time of activating "0infoprov" it is asking, insert the "0logsys" must be an attribute.why?
the info objective 0infoprov is appears as inactive mode at modeling level0.
please let me know,what will be the problems for activating "0infoprov".
plz respond quickly.
kumar.
Edited by: kumar kumar on Dec 10, 2008 5:35 AM

Error when running reports on the WEB

Hi,
I have been successful in deploying our application on the Web,
using WebDB listener, Developer Server, Report Server and JInitiator 1.1.7.18.
Now the forms on the web runs fine without any problem but
when I run Reports from Forms using RUN_PRODUCT built-in by passing parameters from Forms to Reports it generates this following error: REP-0081-Error During I/O operation and REP-0110: Unable to open file "<<file>>.html" scaba 14.
The strange thing about the REP-0110 is, it refer to a path that is not defined in my registry(FORMS60_OUTPUT,_MAPPING, REPORTS60_PATH,_TMP,_WEBLOC,_WEBLOC_TRANSLATED) and neither my physical directory in the directory mappings which I defined on the web server. (I refer to a the path mindpack4.1 and the REP-0110 refer to mindpack4_1)
Any help appreciated.
Thanks

Hello pals,
i have set the following parameters: TMPDIR and REPORTS60_TMP...
and it seems to be working!!!
i hope that the problem is not somewhere else.
NB. I was having problems with 2 reports only. the others were
working fine.
any comments will be most welcomed.
regards
Yogeeraj

Error when opening page with the web browser activex

I have downloaded the example for using the web browser activeX component to display a web page. It basically works, but it keeps returning an error (from NI's web site) that I don't see when opening the site from IE. The message I get is:
Are there things that need to be initialized when calling the browser in this way?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Mike,
It looks like ni.com is not supplying that particular console object which is causing an issue with the embedded instance of IE9. Every other website I've tried works correctly. I've looked around the ActiveX methods to intercept and ignore this error, but I haven't found anything yet.
For others' reference, here is the link to the example:
https://decibel.ni.com/content/docs/DOC-2042
Karl G.
Applications Engineer
ni.com/support

Error when trying to dispay the web page

java.lang.NullPointerException
     at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:683)
     at javax.faces.webapp.UIComponentTag.encodeBegin(UIComponentTag.java:591)
     at javax.faces.webapp.UIComponentTag.doStartTag(UIComponentTag.java:478)
any help would be appreciated

Does this error happen for all your web pages or just one web page.
If it just happens with a certain web page, what is different about it?
Is it a page that you created with an earlier version of the IDE?
Sometimes in the stack trace that you cut the error msg from, there will be entries for the web page itself. Did you search through the whole set of stack traces to see if it identified an errant line in the .java file for the web page?
Can you put log("some string") statements in your .java source and view the log to determine when and where the problem is happening?
Have you tried the debugger? See http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/debugging.html

Error when executing query in the Web Analyzer...

Similar Messages

Maybe you are looking for