Error when export report to PDF with a none standard Windows font

Hi,
I got this error when trying to export PDF under VS2008 with an special true type font in the code behind. The error says:
...temp_9550ab94-02fc-4362-b259-cc6de8d6c04b {32E546F5-C6A3-44FC-B8EF-D5E37A1118FA}.rpt:\nOperation not yet implemented.
In the crystal reort under VS2008, I use a special font which is true type and it is already installed in the system, I can see the font in many other software like Word, Notepad, etc... without any problem.
Is anyone know how to fix it? please help.
Many thanks!!!
Lan

Hi Ludek,
I trid the SP, but doesn't work. I can send the font to you, it is only 50K. If you would like to try I can send it to you, but i am not sure how i can upload the font file. I guess any none Windows standard font will have same issue, i guess.
For now, i am going to give up and use image file instead.
Thanks,
Lan
Do you know if it is well-known issue in CR?
- No I do not.
where i can get any SP of CR for VS2008?
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Runtimes for SP1:
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255282008E/CRRedist2008_x86.zip
I would not mind testing this, but I need to know if there is a free download of this font available. I Googled the font name, but a quick search did not come up with anything.
Alternatively, you could try CR 2008 (12.x) and see if that will do the trick for you. An Eval of CR 2008 is available here:
http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx

Similar Messages

Bad files when exporting reports to PDF with CR4E

Hello,Have any of you successfully used CR4E to create a report and report viewer that produces a valid PDF export? I attempted this and the report looks fine, but when I export it to a PDF and attempt to open it, I get an Adobe Reader error message stating "There was an error opening this document. The file is damaged and could not be repaired." I am using Adobe Reader 7.0.8.Thanks,Matt

Thank you Sean!Â I am using WAS 6.0.2, but I can't verify the fix you mention as I am not sure which JSP I need to remove the whitespace from.Â Can you give me some more info on this?Â I am experimenting with CR4E as I am in the architectural design stage for a new project, so I don't really understand the CR4E object model yet.Â Â I created my report viewer JSP from the report, and the following JSP code was generated.Â I need to remove the white space from this JSP?Thank you again.Matt<%@page import="com.businessobjects.samples.JRCHelperSample, com.crystaldecisions.report.web.viewer.CrystalReportViewer,com.crystaldecisions.reports.sdk.ReportClientDocument,com.crystaldecisions.sdk.occa.report.application.OpenReportOptions,com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase,com.crystaldecisions.sdk.occa.report.reportsource.IReportSource,com.faweb.Company,java.util.ArrayList,java.util.List"%><%// This sample code calls methods from the JRCHelperSample class, which // contains examples of how to use the BusinessObjects APIs. You are free to // modify and distribute the source code contained in the JRCHelperSample class. try{ String reportName = "Report2.rpt";
ReportClientDocument clientDoc = (ReportClientDocument) session.getAttribute(reportName);
if(clientDoc ==null) {
// Report can be opened from the relative location specified in the CRConfig.xml, or the report location
// tag can be removed to open the reports as Java resources or using an absolute path
// (absolute path not recommended for Web applications).
clientDoc =newReportClientDocument();
// Open report
clientDoc.open(reportName, OpenReportOptions._openAsReadOnly);
// ****** BEGIN LOGON DATASOURCE SNIPPET ****************
// Database username and password
String userName = "db2inst1"; // TODO: Fill in database user
String password = "######"; // TODO: FIll in password
// logon to database
JRCHelperSample.logonDataSource(clientDoc, userName, password);
// ****** END LOGON DATASOURCE SNIPPET ****************
// ****** BEGIN POPULATE WITH POJO SNIPPET ****************
// **** POPULATE MAIN REPORT ***{// Populate POJO data sourceString className = "com.faweb.Company"; // Look up existing table in the report to set the datasource for and obtain its alias. This table must// have the same schema as the Resultset that is being pushed in at runtime. The table could be created// from a Field Definition File, a Command Object, or regular database table. As long the Resultset// schema has the same field names and types, then the Resultset can be used as the datasource for the table.String tableAlias = "Company"; //Create a dataset based on the class com.faweb.Company//If the class does not have a basic constructor with no parameters, make sure to adjust that manuallyList dataSet = new ArrayList(); dataSet.add(new* Company(0, "Dummy"));
// dataSet.add(new Company());
// dataSet.add(new Company());
// dataSet.add(new Company());
// dataSet.add(new Company());
//Push the resultset into the report (the POJO resultset will then be
the runtime datasource of the report)
JRCHelperSample.passPOJO(clientDoc, dataSet, className, tableAlias, "");
// ****** END POPULATE WITH POJO SNIPPET ****************
// Store the report document in session
session.setAttribute(reportName, clientDoc);
// ****** BEGIN CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************
// Create the CrystalReportViewer object
CrystalReportViewer crystalReportPageViewer =newCrystalReportViewer();
// set the reportsource property of the viewer
IReportSource reportSource = clientDoc.getReportSource();
crystalReportPageViewer.setReportSource(reportSource);
// set viewer attributes
crystalReportPageViewer.setOwnPage(true);crystalReportPageViewer.setOwnForm(true);
// Apply the viewer preference attributes
// Process the report
crystalReportPageViewer.processHttpRequest(request, response, application,null);
// ****** END CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************
// ****** BEGIN EXPORT PDF SNIPPET ***************{IReportSource reportSource = clientDoc.getReportSource();JRCHelperSample.exportPDF(reportSource, request, response, config.getServletContext(), true*);
// ****** END EXPORT PDF SNIPPET ***************} catch* (ReportSDKExceptionBase e) {
out.println(e);

Help me, I have a problem with font when export report to PDF?

Hi everyone! Help me
I have a problem with font when export report to PDF
My report uses template .rtf with font Times New Roman (Unicode), language is VietNamese.
when desige template no problem, error only happen when view report by PDF.
Edited by: user10236405 on Oct 15, 2008 11:23 PM

give it time to boot. the time depends on yr memory size n data. soon a process bar will appear indicating the boot process. if still this doesnt work. try formating the phone. but this ways u lose all data on the phone (unless u backed it). relax! the data on the memory card is safe.

IllegalArgumentException error while exporting report in PDF format

Hi all,
we are using Crystal Report 2008, Java 1.5.22 and JRC 11.8.4.1094 to export reports in pdf format within java.
It is working fine for all reports except for a specific report where it gives IllegalArgumentException while exporting the PDF.
Below the error occurred:
12:39:16,875 ERROR [c] Disk Exporter: no output file was created by an exporter
12:39:16,875 ERROR PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob (from destination?); aborting export
java.lang.IllegalArgumentException
 at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source)
 at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)
 at com.crystaldecisions.reports.a.e.if(Unknown Source)
 at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
 at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
 at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)
 at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source)
 at com.crystaldecisions.report.web.event.br.a(Unknown Source)
 at com.crystaldecisions.report.web.event.w.a(Unknown Source)
 at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
 at com.crystaldecisions.report.web.event.av.a(Unknown Source)
 at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
 at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
 at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
 at com.crystaldecisions.report.web.viewer.ReportExportControl.a(Unknown Source)
 at com.crystaldecisions.report.web.ServerControl.getHtmlContent(Unknown Source)
12:39:16,875 INFO [c] Disk Exporter: finalizing export to destination
12:39:16,875 ERROR [JRCCommunicationAdapter] Failed to export report
com.crystaldecisions.reports.exporters.format.page.pdf.a.a: Unknown exception is thrown
 at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)
 at com.crystaldecisions.reports.a.e.if(Unknown Source)
 at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
 at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
 at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)
 at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source)
 at com.crystaldecisions.report.web.event.br.a(Unknown Source)
 at com.crystaldecisions.report.web.event.w.a(Unknown Source)
 at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
 at com.crystaldecisions.report.web.event.av.a(Unknown Source)
 at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
 at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
 at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
 at com.crystaldecisions.report.web.viewer.ReportExportControl.a(Unknown Source)
 at com.crystaldecisions.report.web.ServerControl.getHtmlContent(Unknown Source)
Caused by: java.lang.IllegalArgumentException
 at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source)
 ... 56 more
Have an idea?
Thanks

Hello Andrea.
I searched through the SAP Notes for the error that you are encountering. There is an SAP Note that exists titled the following:
1332907 - Report being exported to PDF format using the Crystal Reports for Eclipse 1.x runtime, errors with the exception: PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob
Since you may not have access to the SAP Notes, I will extract the details that are mentioned in the note here:
=============================================
Symptom
Attempting to export a report to Adobe PDF format using the Crystal Reports for Eclipse 1.x runtime results in an exception.
The exception indicates "PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob"
Environment
Windows 2003
Apache Tomcat 5.0
Crystal Reports for Eclipse version 1.x
Reproducing the Issue
Using the Crystal Reports for Eclipse runtime version 1.x attempt to export a report to PDF format that has the "Repeat Group Header on Each Page" option enabled.
Note: This does not occur if this option is enabled in a subreport.
Cause
When the "Repeat Group Header on Each Page" is enabled for a group in a main report the Crystal Reports for Eclipse 1.x runtime is unable to correclty format the PDF document which results in an exception.
Resolution
Updating the application to use Crystal Reports for Eclipse version 2.x runtime will resolve the issue.
The most recent updates to the Crystal Reports for Eclipse runtime can be freely downloaded from the SAP SDN Website.
http://www.sdn.sap.com/irj/boc/crystalreports-java
=============================================
Since you are on JRC 11.8.4.1094 which is Crystal Reports for Eclipse 1.x, this may be the cause of your problem.
I hope that this helps.
Regards.
- Robert

Error when exporting reports using MAPI

We created a .NET class that wraps CR 2010 .NET Crystal Reports functions and made it COM visible. This class is used to create a COM object in a js script which in turn used to export reports to a PDF file with the destination MAPI.
It exports reports just fine without any errors however if prior to instantiation the exporting class we instantiate a class that has nothing to do with the Crystal Reports functions, our exporting object throws u201CExternal component has thrown an exception.u201D error when exporting. It appears that it has something to do with the SideBySide feature. I was wondering if somebody knows what causes this and if there is a way to fix this problem.
Thanks for your help!
 
 
Below are 2 procmon.exe outputs, the first when exporting works and the second when it doesnu2019t
 
 
 
1) Procmon.exe output when exporting works fine
 
 
 HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS Desired Access: Read
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\CommonFilesDir SUCCESS Type: REG_SZ, Length: 72, Data: C:\Program Files (x86)\Common Files
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL FAST IO DISALLOWED
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
 7:16:30.7403615 AM test.exe 4396 FASTIO_QUERY_INFORMATION C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Data/List Directory, Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL FILE LOCKED WITH ONLY READERS SyncType: SyncTypeCreateSection, PageProtection:
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS SyncType: SyncTypeOther
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Image Base: 0x79260000, Image Size: 0x1073000
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryNameInformationFile, Name: \Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Generic Read, Disposition: Open, Options: Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS Desired Access: Read
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide\PreferExternalManifest NAME NOT FOUND Length: 20
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Generic Read, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 
 
 //////////////////////////////////////////////////////////////////////
 2) Procmon.exe output when exporting doesnu2019t work, notice that it tries to open MSO.dll at the same location as in the output above but fails, it tries then to open it at several other locations and fails
 
 
 HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS Desired Access: Read
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\CommonFilesDir SUCCESS Type: REG_SZ, Length: 72, Data: C:\Program Files (x86)\Common Files
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL FAST IO DISALLOWED
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Data/List Directory, Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL FILE LOCKED WITH ONLY READERS SyncType: SyncTypeCreateSection, PageProtection:
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS SyncType: SyncTypeOther
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Users\Paul\projects\temp\test\Debug\MSO.dll FAST IO DISALLOWED
 C:\Users\Paul\projects\temp\test\Debug\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Program Files (x86)\Microsoft Office\Office12\MSO.dll FAST IO DISALLOWED
 C:\Program Files (x86)\Microsoft Office\Office12\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Windows\SysWOW64\MSO.dll FAST IO DISALLOWED
 C:\Windows\SysWOW64\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Windows\system\MSO.dll FAST IO DISALLOWED
 C:\Windows\system\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Windows\MSO.dll FAST IO DISALLOWED
 C:\Windows\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a

I tried to run exporting code in a .net application and got the same error. I first created the COM object that causes the problem and then ran exporting CR functions. It works fine if I run the code without creating the COM object.
Below is the code I used.
 Type objClassType = Type.GetTypeFromProgID("ebms.main");
 object objMain = Activator.CreateInstance(objClassType);
 try
 object[] p = new object[4];
 p[0] = "C:\\ebms\\co1";
 p[1] = "C:\\ebms\\co1";
 p[2] = "Administrator";
 p[3] = "";
 objClassType.InvokeMember("LoginToCompany", System.Reflection.BindingFlags.InvokeMethod, null, objMain, p);
 catch (Exception ex)
 this.RPTDoc = new ReportDocument();
 this.RPTDoc.Load(@"C:\\Users\\Paul\\Desktop\\AR Customer List.rpt");
 PdfRtfWordFormatOptions pdfOpts = ExportOptions.CreatePdfRtfWordFormatOptions();
 MicrosoftMailDestinationOptions mailOpts = ExportOptions.CreateMicrosoftMailDestinationOptions();
 ExportOptions exportOpts = new ExportOptions();
 pdfOpts.UsePageRange = false;
 exportOpts.ExportFormatOptions = pdfOpts;
 mailOpts.MailMessage = "something";
 mailOpts.MailSubject = "something";
 mailOpts.MailToList = "emailaddress";
 exportOpts.ExportDestinationOptions = mailOpts;
 exportOpts.ExportDestinationType = ExportDestinationType.MicrosoftMail;
 exportOpts.ExportFormatType = ExportFormatType.PortableDocFormat;
 try
 this.RPTDoc.Export(exportOpts);
 catch (Exception ex)
 MessageBox.Show(ex.Message, "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);

"Memory full." error while exporting report to PDF format - CR2008SP2

 
Hello, 
 
I am developing a C#.NET application that uses the CR2008 SP2 .NET libraries. This application performs some database updates and uses CR2008 SP2 to run 7 different reports and export the results to PDF files. This application is a console application that only uses Crystal to export the rendered reports - it does not use previews or printing. 
 
The specific pattern of this application is as follows: 
 
- perform some database updates 
- render report #1 and export it as a PDF file 
- perform some database updates 
- render report #2 and export it as a PDF file 
... pattern repeats to report #7 ... 
 
This application works fine as long as I run only one instance of it at a time. The problem occurs when I try to run multiple instances of this application at the same time. When I run multiple instances of this application at the same time (against totally different databases) each instance will start up happily and begin running through the process described above. After a few moments one or more instances will fail during the report export. The specific error is as follows: 
 
"Memory full. Failed to export the report. Not enough memory for operation." 
 
The error always comes from the call to: 
 
CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(Format, FileName) 
 
I have watched the memory consumption of these instances of my application while they are running. They never seem to exceed approximately 52MB each. At this time task manager reports over 1GB of physical memory free. These numbers lead me to believe that memory is not actually "full". 
 
Here are some specifics about the environment: 
 
Dell Vostro 1720 / P8600 / 4GB 
Windows 7 Ultimate x64 
SQL Server 2008 SP1 x64 
Crystal Reports 2008 SP2 
 
Specifics about the C# application: 
 
IDE: Visual Studio 2008 SP1 
Type: Console Application 
Target platform: x86 
.NET Framework: 3.5 SP1 
Crystal References: 
- CrystalDecisions.CrystalReports.Engine (v12.0.2000.0) 
- CrystalDecisions.Shared (v12.0.2000.0) 
 
Specifics about the report templates: 
 
The report templates are RPT files saved from CR2008 SP2. They are relatively simple. A few of them (maybe 3) contain a single subreport. 
 
Specifics about the database: 
 
Each database is approximately 1GB in size. The database contains many tables but the reports only access a handful of tables. Each table that the reports access have maybe a few hundred rows tops. Most have less than 100. Likewise, when the reports perform their selections the resulting rowset for the reports is anywhere from about 20 records to a few hundred records tops. 
 
A few items to note: 
 
- Multiple instances of my application need to be able to run on a single machine at the same time. It is a specific design requirement. 
- My application works fine as long as I run only one instance of it at a time. 
- My application works fine when I run multiple instances if I comment out the Crystal part of it. 
- My application works fine when I run multiple instances if I change the export format from PDF to HTML32 or HTML40 (have not tried any others) 
- The machine has over 1GB of physical memory free when this error occurs. 
- I have taken steps to ensure that I am properly disposing of my CrystalDecisions.CrystalReports.Engine.ReportDocument instance just after each export is complete. I have tried to use the "using" keyword, as well as explicitly setting the instance to null and calling the .NET framework garbage collector. This did not seem to help. 
 
Any assistance with this issue would be greatly appreciated. 
 
Steve 
 
Edited by: scbraddy on Mar 11, 2010 1:53 AM

 
Jonathan & Ludek, 
 
Thanks for the timely response and good suggestions guys! 
 
I have performed a few more tests today in order to help answer some of your questions. 
 
Below are my responses. Some of them are answers to questions and some of them are observations based on tests I have performed today. 
 
- The database system is SQL Server 2008 SP1 Developer Edition x64. 
 
- The C# application connects to the database using the native .NET SQL client (System.Data.Sql). 
 
- During runtime I connect the report to the database by looping through the ReportDocument.Database.Tables collection. For each Table found I create a CrystalDecisions.Shared.TableLogOnInfo instance, fill in the table name, server name, database name, user ID, and password, and use Table.ApplyLogOnInfo() to apply it. I do the same thing for the subreports collection if there are any. Like I said, about half of the reports contain a single subreport. 
 
- The report templates are currently set to use the "SQLOLEDB" Provider. The Database Type is set to "OLE DB (ADO)". I am not entirely sure what you mean by trying a different database driver. I assume you mean to change the provider? If so, given the fact that we are using SQL Server 2008, what would I change it to? 
 
- If I do not perform the database updates during application runtime (instead, perform them ahead of time and then allow the application to only render the reports) then I still have the same problem. Nothing changes. 
 
- I installed the Fix Pack 2.5, rebooted, and tried again. Same problem. 
 
- I do not beleive that I am using XML transforms. How would I know? 
 
- Regarding fragmented memory: It is hard for me to believe that, given the amount of memory free on the machine once all processes are up and running (1GB+), and the size of the processes (~50MB), that a contiguous block could not be found. Maybe there is some Crystal process that is attempting to balloon out of control, but as far as I can tell my application is not getting very big. I will not rule this out of course because I don't know for sure. 
 
- Regarding killing the process once a report is rendered: The problem with this is that the application needs to perform these 7 groups of updates and render these 7 reports in a specific sequence all as part of one complete "pass". Also, this application needs to be able to be able to handle a scneario where one or more instance of the application is started on a single machine at roughly the same time (pointed at different databases). The application actually does work fine in this regard (staying well within the capabilities of my 4GB laptop even when 8 of them are running) except that I always get the same error when I choose PDF as my export format. 
 
- I ran a test today where I changed the export format to HTML40 and started 8 instances of the application at the same time, each working from a different copy of the database. The instances ran a little slow but did complete in good time with no errors. Please note that changing the export format to PDF will cause the application to fail with the "memory full" error if even only 2 instances are running at the same time. The only way I can successfully complete a run with the export format set to PDF is to run only 1 instance at a time. I can run it over and over all day long and it will not fail, as long as only 1 instance is running at a given time. As of yesterday I had only proven that the application would complete when using the HTML40 export format when 2 or 4 instances are running, but today I doubled it again (to 8) and still no failure while using HTML40. This is possibly the most interesting fact about this problem, and is another reason why I am skeptical that memory fragmentation is the culprit. 
 
We would like to solve this problem because we would like to continue to target the PDF format. It is the standard report export format for our applications. If we cannot solve this problem we may call a meeting and decide whether to proceed with the HTML40 export format, or possibly dump Crystal from this project altogether. 
 
Thanks again for your interest in our problem and your timely and helpful responses. I'm really not sure where to go next ... maybe change the database provider in the templates? I will need some specific advice in this area because I'm not sure what to do. Any more ideas you guys have will be greatly appreciated on this end! 
 
Steve 
 
Edited by: scbraddy on Mar 12, 2010 2:18 AM

RrRenderingError - Error while exporting report to PDF

Hi,
I am getting an error while exporting SSRS 2000 report to PDF. The error message is as shown below. This is report actually by sales rep and it is working fine with all the sales rep but when i try with one sales rep i get this error.
Error
Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. (rrRenderingError) Get Online Help
Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown.
Object reference not set to an instance of an object.
Please somebody help me out.
Thanks
Cheers
Gigi
cheri

Cherian K,
A message that indicates that the object reference is not set to an instance of the object is typically caused by one or more of the following reasons:
There are soft page breaks within empty lists in the report.
There are hidden groups within the report and you tried to export it to PDF.
The report has a link to a subreport that is not published on the report server and you tried to export it to CSV.
There are text boxes with a width and/or height of zero in the report.
A text box is either hidden or the NoRows property is set to true.
A text box spans table cells where some cells have a collection of null values.
The report has static columns and/or rows and, in the Visibility properties, Hidden is set to true.
The report has static columns and/or rows and there are grand totals in the report.
The report has static column headings and, in the Visibility properties, Hidden is set to true.
The matrix report has multiple columns and rows and, in the Visibility properties, Hidden is set to true and
you tried to export to PDF or TIFF.
Regards
Shiv

30 Second time-out when Exporting Report to PDF in Web App.

Post Author: Dave Milford
CA Forum: .NET
I'm currently upgrading older web applications to new web servers that use Windows Server 2003 and IIS 6, with SQL Server 2000 on a separate Windows 2003 server. The tools that I am required to use for this conversion are Visual Studio .Net 2003 and the Crystal Reports 9.1 version that comes with VS.Net 2003. The Crystal Reports .dlls from Visual Studio 2003 have been installed onto the new web servers (using the .MSI packages) and all available CR service packs have been applied.
I've been able to successfully migrate the reports from CR 7.0 and to create new ASPX pages to drive the reports. On the server script side (in the Page_Load event) I am using the ExportToStream method of the ReportDocument object to load a MemoryStream and then write the MemoryStream out to the client's browser, i.e.
Dim oStream As MemoryStream
oStream = DirectCast(creport.ExportToStream(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat), MemoryStream)
Response.Clear()
Response.ContentType = "application/pdf"
Response.BinaryWrite(oStream.ToArray())
Response.End()
One of two things will occur: either the report will appear in the client browser as a PDF within 30 seconds of the user requesting the report, or the client browser will display an 'Internet Explorer cannot display the webpage' error if more than 30 seconds have passed.
Some of the reports return a small amount of data. These reports always produce a PDF, usually within 5 seconds.
Some of the reports utilize the RecordSelectionFormula property. When these reports are filtered to produce small results, the PDF is generated; when the reports are not filtered (and will return a large amount of information) the client browser will display the 'Cannot Display Web page' message (after 30 seconds).
I've tested the SQL Server views that suppy the information for the reports; they take no longer than 4 or 5 seconds to produce recordsets.
These same reports work with the CrystalReportViewer .Net object, however, I need to get these reports to PDF in order for people to be able to save/print them.
Anyone want to point me in the right direction?

Post Author: Dave Milford
CA Forum: .NET
I'm currently upgrading older web applications to new web servers that use Windows Server 2003 and IIS 6, with SQL Server 2000 on a separate Windows 2003 server. The tools that I am required to use for this conversion are Visual Studio .Net 2003 and the Crystal Reports 9.1 version that comes with VS.Net 2003. The Crystal Reports .dlls from Visual Studio 2003 have been installed onto the new web servers (using the .MSI packages) and all available CR service packs have been applied.
I've been able to successfully migrate the reports from CR 7.0 and to create new ASPX pages to drive the reports. On the server script side (in the Page_Load event) I am using the ExportToStream method of the ReportDocument object to load a MemoryStream and then write the MemoryStream out to the client's browser, i.e.
Dim oStream As MemoryStream
oStream = DirectCast(creport.ExportToStream(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat), MemoryStream)
Response.Clear()
Response.ContentType = "application/pdf"
Response.BinaryWrite(oStream.ToArray())
Response.End()
One of two things will occur: either the report will appear in the client browser as a PDF within 30 seconds of the user requesting the report, or the client browser will display an 'Internet Explorer cannot display the webpage' error if more than 30 seconds have passed.
Some of the reports return a small amount of data. These reports always produce a PDF, usually within 5 seconds.
Some of the reports utilize the RecordSelectionFormula property. When these reports are filtered to produce small results, the PDF is generated; when the reports are not filtered (and will return a large amount of information) the client browser will display the 'Cannot Display Web page' message (after 30 seconds).
I've tested the SQL Server views that suppy the information for the reports; they take no longer than 4 or 5 seconds to produce recordsets.
These same reports work with the CrystalReportViewer .Net object, however, I need to get these reports to PDF in order for people to be able to save/print them.
Anyone want to point me in the right direction?

Export report to PDF with RDC, ASP

I use asp on windows 2003 server and Crystal reports XI, service pack 3.When I export a report to a PDF file, it creates a 0kb file. No error messages are received. The directory allows for writing files. I can manually export a file via the viewer. When I try to open this file I get an error that another application is using the file (Crystal?)Code I use:<% reportname = "Radar.rpt" ExportFileName = "Radar.PDF" If Not IsObject (session("oApp")) Then Set session("oApp") = Server.CreateObject("CrystalRuntime.Application.11") End If Path = MID(request.ServerVariables("PATH_TRANSLATED"), 1, (LEN(request.ServerVariables("PATH_TRANSLATED"))-22)) & "Reports\" If IsObject(session("oRpt")) then Set session("oRpt") = nothing End ifOn error resume nextSet session("oRpt") = session("oApp").OpenReport(Path & reportname, 1)session("oRpt").MorePrintEngineErrorMessages = False session("oRpt").EnableParameterPrompting = False 'session("oRpt").DiscardSavedDataWith session("oRpt").Database.Tables(1).ConnectionProperties ' .Item("DSN") = "test" .Item("User ID") = "test" .Item("Password") = "test" End With session("oRpt").ParameterFields(1).AddCurrentValue(Cint(request.Querystring("CustomerID"))) End SelectIf Err.Number <> 0 Then Response.Write "An Error has occured. Please check the ASP page. " Response.Write "Error " & Err.number & " " & Err.description & " " Response.Write "Report: " & ReportName End Ifsession("oRpt").ReadRecords If Err.Number <> 0 Then Response.Write "Error Occurred Reading Records: " & Err.Description Set Session("oRpt") = nothing Set Session("oApp") = nothing Session.Abandon Response.End Else If IsObject(session("oPageEngine")) Then set session("oPageEngine") = nothing End If set session("oPageEngine") = session("oRpt").PageEngine End IfSet CrystalExportOptions = session("oRpt").ExportOptions ExportDirectory = MID(request.ServerVariables("PATH_TRANSLATED"), 1, (LEN(request.ServerVariables("PATH_TRANSLATED"))-22)) & "Docs\" ExportType = "31" CrystalExportOptions.DiskFileName = ExportDirectory & ExportFileName CrystalExportOptions.FormatType = CInt(ExportType) CrystalExportOptions.DestinationType = CInt(1) session("oRpt").Export False %>  

Hi Ludek,
I trid the SP, but doesn't work. I can send the font to you, it is only 50K. If you would like to try I can send it to you, but i am not sure how i can upload the font file. I guess any none Windows standard font will have same issue, i guess.
For now, i am going to give up and use image file instead.
Thanks,
Lan
Do you know if it is well-known issue in CR?
- No I do not.
where i can get any SP of CR for VS2008?
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Runtimes for SP1:
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255282008E/CRRedist2008_x86.zip
I would not mind testing this, but I need to know if there is a free download of this font available. I Googled the font name, but a quick search did not come up with anything.
Alternatively, you could try CR 2008 (12.x) and see if that will do the trick for you. An Eval of CR 2008 is available here:
http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx

CRVS2010 Beta - Cannot export report to PDF with unicode characters

My report has some unicode data (Chinese), it can be previewed properly in the windows form report viewer. However, if I export the report document to PDF file, the unicode characters in exported file are all displayed as a square.
In the version of Crystal Report 2008 R2, it can export the Chinese characters to PDF when I select a Chinese font in report. But VS2010 beta cannot export the Chinese characters even a Chinese font is selected.

Barry, what is the specific font you are using?
The below is a reformatted response from Program Management:
Using non-Chinese font with Unicode characters (Chinese) the issue is reproducible when using Arial font in Unicode characters field. After changing the Unicode character to Simsun (A Chinese font named 宋体 in report), the problem is solved in Cortez and CR both.
Ludek

Fatal Error when exporting Report to Excel

Hi Everyone, I've been trying to export my report to excel. But I have exhausted all possible reasons and I just couldn't figure it out. Can someone please help me. Thanks in advance.
PROGRAM NAME : ZADC_PAYSUMNEW
REPORT ZADC_PAYSUMNEW
NO STANDARD PAGE HEADING
 LINE-SIZE 450
 LINE-COUNT 65 MESSAGE-ID zmes.
TABLE DECLARATION *
TABLES: cskt,
 csks,
 pa0009,
 pcl1,
 pcl2,
 pernr,
 t512t,
 t549a,
 t527x,
 zhrprtype.
 INFOTYPES DECLARATION
INFOTYPES: 0001, 0002.
 INCLUDE DECLARATION
INCLUDE: rpc2rx00.
INCLUDE: rpc2rxx0.
INCLUDE: rpppxd00.
 INTERNAL TABLE DECLARATION
DATA: BEGIN OF itab OCCURS 0,
 khinr LIKE csks-khinr,
 kostl LIKE p0001-kostl,
 ltext(40),
 p_date LIKE pc261-inper,
 basic(7) TYPE p DECIMALS 2,
 pera(7) TYPE p DECIMALS 2,
 longp(7) TYPE p DECIMALS 2,
 trall(6) type p decimals 2,
 srvaw(6) TYPE p DECIMALS 2,
 chall(7) TYPE p DECIMALS 2,
 leave(7) TYPE p DECIMALS 2,
 meal(7) TYPE p DECIMALS 2,
 saldf(7) TYPE p DECIMALS 2,
 sipps(7) TYPE p DECIMALS 2,
 sipgs(7) TYPE p DECIMALS 2,
 subs(7) TYPE p DECIMALS 2,
 hzard(7) TYPE p DECIMALS 2,
 lallw(7) TYPE p DECIMALS 2,
 medps(7) TYPE p DECIMALS 2,
 medgs(7) TYPE p DECIMALS 2,
 pcontps(7) TYPE p DECIMALS 2,
 pcontgs(7) TYPE p DECIMALS 2,
 pagibps(6) TYPE p DECIMALS 2,
 pagibgs(6) TYPE p DECIMALS 2,
 lwop(7) TYPE p DECIMALS 2,
 npay(7) TYPE p DECIMALS 2,
 otime(7) TYPE p DECIMALS 2,
 ec(7) TYPE p DECIMALS 2,
 fr_date like sy-datum,
 to_date like sy-datum,
 END OF itab.
DATA: BEGIN OF jtab OCCURS 0,
 khinr LIKE csks-khinr,
 kostl LIKE p0001-kostl,
 ltext(40),
 basic(7) TYPE p DECIMALS 2,
 pera(7) TYPE p DECIMALS 2,
 longp(7) TYPE p DECIMALS 2,
 trall(6) type p decimals 2,
 srvaw(6) TYPE p DECIMALS 2,
 chall(7) TYPE p DECIMALS 2,
 leave(7) TYPE p DECIMALS 2,
 meal(7) TYPE p DECIMALS 2,
 saldf(7) TYPE p DECIMALS 2,
 sipps(7) TYPE p DECIMALS 2,
 sipgs(7) TYPE p DECIMALS 2,
 subs(7) TYPE p DECIMALS 2,
 hzard(7) TYPE p DECIMALS 2,
 lallw(7) TYPE p DECIMALS 2,
 medps(7) TYPE p DECIMALS 2,
 medgs(7) TYPE p DECIMALS 2,
 pcontps(7) TYPE p DECIMALS 2,
 pcontgs(7) TYPE p DECIMALS 2,
 pagibps(6) TYPE p DECIMALS 2,
 pagibgs(6) TYPE p DECIMALS 2,
 lwop(7) TYPE p DECIMALS 2,
 npay(7) TYPE p DECIMALS 2,
 otime(7) TYPE p DECIMALS 2,
 ec(7) TYPE p DECIMALS 2,
 END OF jtab.
DATA: it_list TYPE STANDARD TABLE OF itab WITH HEADER LINE.
 CONSTANTS DECLARATION
CONSTANTS: basic TYPE pc207-lgart VALUE '0401',
 basic2 TYPE pc207-lgart VALUE '0402',
 basic3 TYPE pc207-lgart VALUE '0403',
 PERA TYPE pc207-lgart VALUE '3104',
 PERA2 TYPE pc207-lgart VALUE '3110',
 longp TYPE pc207-lgart VALUE '1601',
 longp2 TYPE pc207-lgart VALUE '1603',
 trall TYPE pc207-lgart VALUE '3109',
 srvaw TYPE pc207-lgart VALUE '2117',
 leave TYPE pc207-lgart VALUE '2118',
 chall TYPE pc207-lgart VALUE '3105',
 chall2 TYPE pc207-lgart VALUE '3111',
 chall3 TYPE pc207-lgart VALUE '3112',
 meal TYPE pc207-lgart VALUE '3102',
 saldf TYPE pc207-lgart VALUE '4103',
 sipps TYPE pc207-lgart VALUE '/090',
 sipps2 TYPE pc207-lgart VALUE '1121',
 subs TYPE pc207-lgart VALUE '3101',
 hzard TYPE pc207-lgart VALUE '1602',
 lallw TYPE pc207-lgart VALUE '3103',
 medps TYPE pc207-lgart VALUE '/313',
 medgs TYPE pc207-lgart VALUE '/314',
 pcontps TYPE pc207-lgart VALUE '/093',
 pcontps2 TYPE pc207-lgart VALUE '1327',
 pcontps3 TYPE pc207-lgart VALUE '1120',
 pagibps TYPE pc207-lgart VALUE '/326',
 pagibps2 TYPE pc207-lgart VALUE '1326',
 lwop TYPE pc207-lgart VALUE '1102',
 otime TYPE pc207-lgart VALUE '0101',
 otime2 TYPE pc207-lgart VALUE '0102',
 otime3 TYPE pc207-lgart VALUE '0103',
 otime4 TYPE pc207-lgart VALUE '0104',
 npay TYPE pc207-lgart VALUE '/559'.
 DATA DECLARATION
DATA: BEGIN OF COMMON PART buffer.
INCLUDE: rpppxd10.
DATA: END OF COMMON PART buffer.
*Table data containing directory to PCL2 payroll results file DATA:
DATA: BEGIN OF rgdir OCCURS 100.
 INCLUDE STRUCTURE pc261.
DATA: END OF rgdir.
DATA: BEGIN OF evpdir OCCURS 100.
 INCLUDE STRUCTURE pc261.
DATA: END OF evpdir.
DATA: country LIKE t001p-molga,
 lname LIKE t527x-orgtx,
 filename2(128),
 p_date LIKE pc261-inper,
 w_basic LIKE pc207-lgart,
 w_basic2 LIKE pc207-lgart,
 w_basic3 LIKE pc207-lgart,
 w_pera LIKE pc207-lgart,
 w_pera2 LIKE pc207-lgart,
 w_longp LIKE pc207-lgart,
 w_longp2 LIKE pc207-lgart,
 w_trall LIKE pc207-lgart,
 w_srvaw LIKE pc207-lgart,
 w_leave LIKE pc207-lgart,
 w_chall LIKE pc207-lgart,
 w_chall2 LIKE pc207-lgart,
 w_chall3 LIKE pc207-lgart,
 w_meal LIKE pc207-lgart,
 w_saldf LIKE pc207-lgart,
 w_sipps LIKE pc207-lgart,
 w_sipps2 LIKE pc207-lgart,
 w_subs LIKE pc207-lgart,
 w_hzard LIKE pc207-lgart,
 w_lallw LIKE pc207-lgart,
 w_medps LIKE pc207-lgart,
 w_medgs LIKE pc207-lgart,
 w_pcontps LIKE pc207-lgart,
 w_pcontps2 LIKE pc207-lgart,
 w_pcontps3 LIKE pc207-lgart,
 w_pagibps LIKE pc207-lgart,
 w_pagibps2 LIKE pc207-lgart,
 w_lwop LIKE pc207-lgart,
 w_otime LIKE pc207-lgart,
 w_otime2 LIKE pc207-lgart,
 w_otime3 LIKE pc207-lgart,
 w_otime4 LIKE pc207-lgart,
 w_npay LIKE pc207-lgart,
 tempgs(7) TYPE p DECIMALS 2,
 ctr-basic(7) TYPE p DECIMALS 2,
 ctr-pera(7) TYPE p DECIMALS 2,
 ctr-longp(7) TYPE p DECIMALS 2,
 ctr-trall(6) TYPE p DECIMALS 2,
 ctr-srvaw(6) TYPE p DECIMALS 2,
 ctr-leave(7) TYPE p DECIMALS 2,
 ctr-chall(7) TYPE p DECIMALS 2,
 ctr-meal(7) TYPE p DECIMALS 2,
 ctr-saldf(7) TYPE p DECIMALS 2,
 ctr-sipps(7) TYPE p DECIMALS 2,
 ctr-sipgs(7) TYPE p DECIMALS 2,
 ctr-subs(7) TYPE p DECIMALS 2,
 ctr-hzard(7) TYPE p DECIMALS 2,
 ctr-lallw(7) TYPE p DECIMALS 2,
 ctr-medps(7) TYPE p DECIMALS 2,
 ctr-medgs(7) TYPE p DECIMALS 2,
 ctr-pcontps(7) TYPE p DECIMALS 2,
 ctr-pcontgs(7) TYPE p DECIMALS 2,
 ctr-pagibps(6) TYPE p DECIMALS 2,
 ctr-pagibgs(6) TYPE p DECIMALS 2,
 ctr-lwop(7) TYPE p DECIMALS 2,
 ctr-otime(7) TYPE p DECIMALS 2,
 ctr-npay(7) TYPE p DECIMALS 2,
 ctr-ec(7) TYPE p DECIMALS 2.
DATA: BEGIN OF ph-version.
 INCLUDE STRUCTURE pc201_pay. "XTWPH9K008656
DATA: END OF ph-version.
DATA: fr_date LIKE sy-datum,
 to_date LIKE sy-datum.
 SELECT-OPTIONS and PARAMETERS
SELECT-OPTIONS: p_status FOR rgdir-srtza DEFAULT 'A'.
DATA: DATE1(15),
 mon(9).
 DEFINITION
DEFINE rp-imp-c2-rx2.
clear:
 orx-version, "OBJECTS_FOR_CLEAR
 rt, rt[].
import
 ph-version to orx-version "OBJECTS_FOR_IMPORT
 rt
from database pcl2(ph) id rx-key using pcl2_exp_imp.
rp-imp-rx-subrc = sy-subrc.
if sy-subrc eq 0 and orx-version-number ne ph-version-number.
 rp-imp-rx-subrc = 8.
endif.
END-OF-DEFINITION.
TYPE-POOLS: slis.
DATA: g_repid LIKE sy-repid,
 gt_fieldcat TYPE slis_t_fieldcat_alv,
 gt_events TYPE slis_t_event,
 gt_top TYPE slis_t_listheader,
 gt_eol TYPE slis_t_listheader,
 gt_list_top_of_page TYPE slis_t_listheader,
 gt_list_end_of_list TYPE slis_t_listheader,
 gs_layout TYPE slis_layout_alv,
 d_f2code LIKE sy-ucomm VALUE '&ETA'.
CONSTANTS: fn_top TYPE slis_formname VALUE 'TOP_OF_PAGE',
 fn_eol TYPE slis_formname VALUE 'END_OF_LIST'.
DATA: it_alv_out TYPE STANDARD TABLE OF itab WITH HEADER LINE.
INITIALIZATION.
g_repid = sy-repid.
PERFORM f_fieldcat_init USING gt_fieldcat[].
PERFORM eventtab_build USING gt_events[].
 START-OF-SELECTION.
START-OF-SELECTION.
fr_date = to_date = pn-endda.
fr_date+6(2) = '01'.
SELECT SINGLE * FROM t549a
 WHERE abkrs = pnpxabkr.
GET PERNR.
 CLEAR: itab, lname.
 PERFORM get_rt_tab.
END-OF-SELECTION.
PERFORM display_grid.
INCLUDE rpppxm00.
USING DATM
 FORM get_rt_tab *
FORM get_rt_tab.
rp_provide_from_last p0001 space pn-begda pn-endda.
rp_provide_from_last p0002 space pn-begda pn-endda.
CALL FUNCTION 'CU_READ_RGDIR'
 EXPORTING
 persnr = p0001-pernr
 IMPORTING
 molga = country
 TABLES
 in_rgdir = rgdir
 EXCEPTIONS
 no_record_found = 1
 OTHERS = 2.
IF sy-subrc = 0.
SELECT single ltext FROM cskt
 INTO itab-ltext
 WHERE kostl = p0001-kostl
 AND datbi = '99991231'.
SELECT SINGLE * FROM csks
 WHERE kostl = p0001-kostl
 AND kokrs = 'GSIS'
 AND datbi = '99991231'.
IF sy-subrc = 0.
 MOVE: csks-kostl TO itab-kostl,
 csks-khinr TO itab-khinr.
ENDIF.
 p_date = pn-paper.
regular payroll run.
 CALL FUNCTION 'CD_EVALUATION_PERIODS'
 EXPORTING
 bonus_date = '00000000'
 inper_modif = t549a-permo
 inper = p_date
 pay_type = ' '
 pay_ident = ' '
 TABLES
 rgdir = rgdir
 evpdir = evpdir
 EXCEPTIONS
 no_record_found = 1
 OTHERS = 2.
 IF sy-subrc = 0.
 LOOP AT evpdir WHERE srtza IN p_status and FPPER eq pn-begda+(6).
 rx-key-pernr = p0001-pernr.
 rx-key-seqno = evpdir-seqnr.
 rp-imp-c2-rx2.
 IF rp-imp-rx-subrc = 0.
 PERFORM rt_to_itab.
 ENDIF.
 ENDLOOP.
 ENDIF.
ENDIF.
ENDFORM.
 FORM PRINT_RX *
FORM print_rx.
LOOP AT rt.
 PERFORM re512t USING country rt-lgart.
ENDLOOP.
ENDFORM.
 FORM RE512T *
--> VALUE(COUNTRY_GROUPING) *
--> VALUE(WTYPE) *
FORM re512t USING value(country_grouping)
 value(wtype).
CHECK t512t-sprsl NE sy-langu
 OR t512t-molga NE country_grouping
 OR t512t-lgart NE wtype.
SELECT SINGLE * FROM t512t
 WHERE sprsl EQ sy-langu
 AND molga EQ country_grouping
 AND lgart EQ wtype.
IF sy-subrc NE 0.
 CLEAR t512t.
ENDIF.
ENDFORM.
 FORM rt_to_itab *
FORM rt_to_itab.
MOVE: basic TO w_basic,
 basic2 TO w_basic2,
 basic3 TO w_basic3,
 pera TO w_pera,
 pera2 TO w_pera2,
 longp TO w_longp,
 longp2 TO w_longp2,
 srvaw TO w_srvaw,
 leave TO w_leave,
 trall TO w_trall,
 chall TO w_chall,
 chall2 TO w_chall2,
 chall3 TO w_chall3,
 meal TO w_meal,
 saldf TO w_saldf,
 sipps TO w_sipps,
 sipps2 TO w_sipps2,
 subs TO w_subs,
 hzard TO w_hzard,
 lallw TO w_lallw,
 medps TO w_medps,
 medgs TO w_medgs,
 pcontps TO w_pcontps,
 pcontps2 TO w_pcontps2,
 pcontps3 TO w_pcontps3,
 pagibps TO w_pagibps,
 pagibps2 TO w_pagibps2,
 LWOP TO w_lwop,
 otime TO w_otime,
 otime2 TO w_otime2,
 otime3 TO w_otime3,
 otime4 TO w_otime4,
 npay TO w_npay.
LOOP AT rt WHERE lgart = w_basic or lgart = w_basic2
 or lgart = w_basic3.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-basic.
 itab-ec = rt-betrg / 100.
 if itab-ec > 100.
 itab-ec = 100.
 ENDIF.
ENDLOOP.
LOOP AT rt WHERE lgart = w_pera.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-pera.
ENDLOOP.
LOOP AT rt WHERE lgart = w_pera2.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-pera.
ENDLOOP.
LOOP AT rt WHERE lgart = w_longp or lgart = w_longp2.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-longp.
ENDLOOP.
LOOP AT rt WHERE lgart = w_trall.
 if rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 endif.
 ADD: rt-betrg TO itab-trall.
ENDLOOP.
LOOP AT rt WHERE lgart = w_srvaw.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-srvaw.
ENDLOOP.
LOOP AT rt WHERE lgart = w_leave.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-leave.
ENDLOOP.
LOOP AT rt WHERE lgart = w_chall or
 lgart = w_chall2 or
 lgart = w_chall3.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-chall.
ENDLOOP.
LOOP AT rt WHERE lgart = w_meal.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-meal.
ENDLOOP.
LOOP AT rt WHERE lgart = w_saldf.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-saldf.
ENDLOOP.
LOOP AT rt WHERE lgart = w_sipps or
 lgart = w_sipps2.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-sipps.
 itab-sipgs = itab-sipps / 9 * 12.
ENDLOOP.
LOOP AT rt WHERE lgart = w_subs.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-subs.
ENDLOOP.
LOOP AT rt WHERE lgart = w_hzard.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-hzard.
ENDLOOP.
LOOP AT rt WHERE lgart = w_lallw.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-lallw.
ENDLOOP.
LOOP AT rt WHERE lgart = w_medps.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-medps.
ENDLOOP.
LOOP AT rt WHERE lgart = w_medgs.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 MOVE: rt-betrg TO tempgs.
 itab-medgs = itab-medps.
ENDLOOP.
LOOP AT rt WHERE lgart = w_pcontps OR
 lgart = w_pcontps2 OR
 lgart = w_pcontps3.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-pcontps.
ENDLOOP.
itab-pcontgs = itab-pcontps * 9.
LOOP AT rt WHERE lgart = w_pagibps OR
 lgart = w_pagibps2.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-pagibps.
ENDLOOP.
LOOP AT rt WHERE lgart = w_pagibps.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-pagibgs.
ENDLOOP.
LOOP AT rt WHERE lgart = w_lwop.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-lwop.
ENDLOOP.
LOOP AT rt WHERE lgart = w_otime or
 lgart = w_otime2 or
 lgart = w_otime3 or
 lgart = w_otime4.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-otime.
ENDLOOP.
LOOP AT rt WHERE lgart = w_npay.
 IF rt-betrg < 0.
 rt-betrg = abs( rt-betrg ).
 ENDIF.
 ADD: rt-betrg TO itab-npay.
ENDLOOP.
COLLECT itab.
CLEAR: itab.
REFRESH rt.
ENDFORM. " rt_to_itab
*& Form f_fieldcat_init
 text
 -->P_GT_FIELDCAT[] text
FORM f_fieldcat_init USING rt_fieldcat TYPE slis_t_fieldcat_alv.
DATA: ls_fieldcat TYPE slis_fieldcat_alv.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 1.
ls_fieldcat-reptext_ddic = ' FXNAL Group'.
ls_fieldcat-fieldname = 'KHINR'.
ls_fieldcat-ref_tabname = 'ITAB'.
ls_fieldcat-outputlen = 12.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 2.
ls_fieldcat-reptext_ddic = ' OFFICE'.
ls_fieldcat-fieldname = 'LTEXT'.
ls_fieldcat-ref_tabname = 'ITAB'.
ls_fieldcat-outputlen = 40.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 3.
ls_fieldcat-reptext_ddic = ' RC #'.
ls_fieldcat-fieldname = 'KOSTL'.
ls_fieldcat-ref_tabname = 'ITAB'.
ls_fieldcat-outputlen = 5.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 4.
ls_fieldcat-reptext_ddic = 'Basic Salary'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'BASIC'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 5.
ls_fieldcat-reptext_ddic = 'PERA Allow'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'PERA'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 6.
ls_fieldcat-reptext_ddic = 'Longevity Pay'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'LONGP'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 7.
ls_fieldcat-reptext_ddic = 'Service Award'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'SRVAW'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 8.
ls_fieldcat-reptext_ddic = 'Child Allowance'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'CHALL'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 9.
ls_fieldcat-reptext_ddic = 'Leave Mone'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'LEAVE'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 10.
ls_fieldcat-reptext_ddic = 'Over-time'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'OTIME'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 11.
ls_fieldcat-reptext_ddic = 'Meal Subsidy'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'MEAL'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 12.
ls_fieldcat-reptext_ddic = 'Salary Diff.'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'SALDF'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 13.
ls_fieldcat-reptext_ddic = 'Subsistence'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'SUBS'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 14.
ls_fieldcat-reptext_ddic = 'Hazard Pay'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'HZARD'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = 15.
ls_fieldcat-reptext_ddic = 'Laundry Allow'.
ls_fieldcat-tabname = 'ITAB'.
ls_fieldcat-fieldname = 'LALLW'.
ls_fieldcat-datatype = 'CURR'.
ls_fieldcat-outputlen = 15.
APPEND ls_fieldcat TO rt_fieldcat.
ENDFORM. " f_fieldcat_init
*& Form display_grid
 text
--> p1 text
<-- p2 text
FORM display_grid.
SORT itab BY kostl khinr.
LOOP AT itab.
 AT NEW khinr.
 MOVE-CORRESPONDING itab TO jtab.
 APPEND jtab.
 ENDAT.
ENDLOOP.
PERFORM my_top USING gt_top[].
PERFORM build_layout USING gs_layout.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = g_repid
 is_layout = gs_layout
 it_fieldcat = gt_fieldcat[]
 it_events = gt_events[]
 TABLES
 t_outtab = itab.
ENDFORM. " display_grid
*& Form eventtab_build
 text
 -->P_GT_EVENTS[] text
FORM EVENTTAB_BUILD USING my_events TYPE SLIS_T_EVENT.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 i_list_type = 1
 IMPORTING
 et_events = my_events.
*TOP OF PAGE
READ TABLE my_events
 WITH KEY NAME = slis_ev_top_of_page
 INTO LS_EVENT.
IF SY-SUBRC = 0.
 MOVE fn_top TO ls_event-form.
 APPEND ls_event TO my_events.
ENDIF.
CLEAR ls_event.
*END OF LIST
READ TABLE my_events
 WITH KEY name = slis_ev_end_of_list
 INTO ls_event.
IF sy-subrc = 0.
 MOVE fn_eol TO ls_event-form.
 APPEND ls_event TO my_events.
ENDIF. " SY-SUBRC for READ TABLE
ENDFORM. " eventtab_build
*& Form top_comment
 text
 -->P_MYTOP[] text
FORM top_comment USING my_top_of_page TYPE slis_t_listheader.
DATA: it_t247 LIKE t247 OCCURS 0 WITH HEADER LINE.
DATA: ls_line TYPE slis_listheader,
 li_recs TYPE i,
 lc_name(60) TYPE c,
 lc_from(30) TYPE c,
 lc_to(30) TYPE c.
CALL FUNCTION 'MONTH_NAMES_GET'
 TABLES
 month_names = it_t247.
Company Name
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = TEXT-001.
APPEND ls_line TO my_top_of_page.
CLEAR ls_line.
ls_line-typ = 'S'.
ls_line-info = TEXT-002.
APPEND ls_line TO my_top_of_page.
Date
CLEAR lc_name.
CONCATENATE sy-datum+6(2) ',' INTO lc_name.
READ TABLE it_t247 WITH KEY mnr = sy-datum+4(2).
CONCATENATE text-003 it_t247-ltx lc_name sy-datum(4)
 INTO lc_name SEPARATED BY space.
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = lc_name.
APPEND ls_line TO my_top_of_page.
ENDFORM. " top_comment
*& Form build_layout
 text
 -->P_GS_LAYOUT text
FORM build_layout USING my_layout TYPE slis_layout_alv.
my_layout-f2code = d_f2code.
my_layout-reprep = 'X'.
my_layout-confirmation_prompt = 'X'.
my_layout-flexible_key = 'X'.
ENDFORM. " build_layout
*& Form TOP_OF_PAGE
 Writes comments on top of page
FORM top_of_page.
DATA: ls_line TYPE slis_listheader,
 lc_name(60) TYPE c.
IF sy-ucomm = '&RNT_PREV'.
 READ TABLE gt_top INTO ls_line INDEX 2.
 lc_name = ls_line-info.
 WRITE 'Page:' TO lc_name+45(5).
 WRITE sy-pagno TO lc_name+52(5).
 ls_line-typ = 'H'.
 ls_line-info = lc_name.
 MODIFY gt_top FROM ls_line INDEX 2.
ENDIF.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = gt_top.
ENDFORM. " TOP_OF_PAGE
*& Form my_top
 text
 -->P_GT_TOP[] text
FORM my_top USING top TYPE slis_t_listheader.
DATA: it_t247 LIKE t247 OCCURS 0 WITH HEADER LINE.
DATA: ls_line TYPE slis_listheader,
 li_recs TYPE i,
 lc_name(60) TYPE c,
 lc_from(30) TYPE c,
 lc_to(30) TYPE c.
CALL FUNCTION 'MONTH_NAMES_GET'
 TABLES
 month_names = it_t247.
Company Name
CLEAR lc_name.
WRITE text-001 TO lc_name.
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = lc_name.
APPEND ls_line TO top.
**Report Name
CLEAR lc_name.
WRITE text-002 TO lc_name.
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = lc_name.
APPEND ls_line TO top.
Range of date
CLEAR lc_name.
lc_name = p_date+4(2).
READ TABLE it_t247 WITH KEY mnr = p_date+4(2).
CONCATENATE: text-003 it_t247-ltx sy-datum(4)
 INTO lc_name SEPARATED BY SPACE.
ls_line-typ = 'H'.
ls_line-info = lc_name.
APPEND ls_line TO top.
ENDFORM. " my_top
*& Form END_OF_LIST
 Writes signature line at end of list
FORM end_of_list.
IF sy-ucomm = '&RNT_PREV' OR sy-ucomm = 'AUSW'.
 REFRESH gt_eol.
 PERFORM my_eol USING gt_eol[].
ELSE.
 REFRESH gt_eol.
ENDIF.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = gt_eol
 i_end_of_list_grid = 'X'.
ENDFORM. " END_OF_LIST
*& Form my_eol
 text
 -->P_GT_EOL[] text
FORM my_eol USING eol TYPE slis_t_listheader.
DATA: ls_line TYPE slis_listheader,
 lc_name(60) TYPE c.
Signature Line
CLEAR lc_name.
lc_name = '.'.
ls_line-typ = 'H'.
ls_line-info = lc_name.
APPEND ls_line TO eol.
CLEAR lc_name.
ls_line-typ = 'H'.
ls_line-info = lc_name.
APPEND ls_line TO eol.
CLEAR ls_line.
ls_line-typ = 'H'.
WRITE 'Submitted By:' TO lc_name(28).
WRITE 'Noted By:' TO lc_name+30(28).
ls_line-info = lc_name.
APPEND ls_line TO eol.
CLEAR: lc_name, ls_line-key.
lc_name = '.'.
ls_line-typ = 'H'.
ls_line-info = lc_name.
APPEND ls_line TO eol.
CLEAR lc_name. CLEAR ls_line.
WRITE sy-uline(28) TO lc_name(28).
WRITE sy-uline(28) TO lc_name+30(28).
ls_line-typ = 'H'.
ls_line-info = lc_name.
APPEND ls_line TO eol.
ENDFORM. " my_eol

1.U are not getting the data into Excel when u client Excel Buttton from the ALV display ?
2.if yes then u will get one message stating that templet is Missing like this ?
Regards
prabhu

XML error when Crystal report calling Webservice with Rampart (ws-security)

Could you please advise me where I am doing wrong -
I have designed the report using CR 2008 following a SAP document instructions but getting error. -
1. Created a Class file and put it in the class folder -
public class PasswordHandler implements CallbackHandler { public void handle(Callback[] callbacks) throws IOException,UnsupportedCallbackException { for (int i = 0; i < callbacks.length; i++) { WSPasswordCallback pwcb = (WSPasswordCallback)callbacks; pwcb.setPassword("clientPassword"); return; } } -
2. created wse_policy.xml with below content clientName com.rockalltech.action.reports.PasswordHandler -
3.Also modified CRConfig.xml with below data com.PasswordHandler -
Still I am getting Rampart error like below -
[2009-06-02 18:04:26,977,,FATAL,com.crystaldecisions.data.xml] org.apache.axis2.AxisFault: org.apache.rampart.Rampart at org.apache.axis2.deployment.URLBasedAxisConfigurator.getAxisConfiguration(URLBasedAxisConfigurator.java:77) at org.apache.axis2.context.ConfigurationContextFactory.createConfigurationContext(ConfigurationContextFactory.java:64) at org.apache.axis2.context.ConfigurationContextFactory.createConfigurationContextFromURIs(ConfigurationContextFactory.java:190) at com.crystaldecisions.data.xml.a.b.a(Unknown Source) at com.crystaldecisions.data.xml.a.a.a(Unknown Source) at com.crystaldecisions.data.xml.f.a(Unknown Source) at com.crystaldecisions.data.xml.f.int(Unknown Source) at com.crystaldecisions.data.xml.CRDB_XMLImpl.DbExecuteQuery(Unknown Source) at com.crystaldecisions.reports.queryengine.driverImpl.xml.XMLQueryDefinition.Execute(Unknown Source) Thomas Edited by: thomasjv on Jun 2, 2009 7:15 PM Edited by: thomasjv on Jun 3, 2009 10:45 AM Edited by: thomasjv on Jun 3, 2009 10:45 AM Edited by: thomasjv on Jun 3, 2009 10:46 AM

Hi!
Thanks for the help:
- I give all proxy details. In HTTP and HTTPS proxy tabs too.
one interesting thing:
- We publicate the same WebService with HTTP and HTTPS prefix.
- If I create a proxy for the WS with HTTP, everything is correct and works well.
- If I create a proxy for the WS with HTTPS, gives the error written the previous posts. (And can't create the logical port with SOAMANAGER)
I compare the 2 WSDL. It is the same, except the links. (HTTP and HTTPS) all others are same.
- And why it is possible in both case (HTTP, HTTPS) to create the proxy with SE80 from the WSDL URL? (And after the logical port was failed)

Export reports as pdf with a dynamic name

Hi all,
I am fairly new at APEX and this sums my situation and questions.
I created a small app that shows invoice information. I created a 'report query' and a 'rtf query layout' and was able to create a export button to save it as pdf.
2 questions arise:
- Can I assign the pdf name dynamically based on a row value (in my case the invoice number), and if possible , how do I go about to do that?
- can I create a "batch" to spawn these pdf files ? How would i do that?
Kind regards and thanks for your input.
Jorge

Hi all,
I am fairly new at APEX and this sums my situation and questions.
I created a small app that shows invoice information. I created a 'report query' and a 'rtf query layout' and was able to create a export button to save it as pdf.
2 questions arise:
- Can I assign the pdf name dynamically based on a row value (in my case the invoice number), and if possible , how do I go about to do that?
- can I create a "batch" to spawn these pdf files ? How would i do that?
Kind regards and thanks for your input.
Jorge

Error when starting Lync 2013 meeting with Office 32 bit windows 8.1 64 bit.

Hi,
have Office pro 2013 32 bit and lync 2013 32bit on win 8.1 64 bit. And I can't start lync meeting's. Lync are working. When i start lync detting error " that lync have trouble and that the program has to be restarted." the choise
is to repare or Close. eighter helps. Any one has any suggestions what to do.

Its reasonably uncommon for the client to just crash as far as I have seen. As Desmond has mentioned I would try the latest updates (ensuring that you also have the latest supporting updates for Office). If this doesnt help you may need to look deeper in
the OS.
Hope it helps!
Andrew Morpeth
Lync Server Specialist - Auckland, NZ
Blog - http://www.lync.geek.nz
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Error when exporting a pdf in SAP

She sends me the error when exporting a pdf from the SAP system, this is the message:
X Object reference not set to an instance of an object.
I hope I can support.
Annex image

See your other thread.

Error when export report to PDF with a none standard Windows font

Similar Messages

Maybe you are looking for