Error when fetching into a variable of ROWTYPE

I came across with a vied error when creating the body of a method.
Problem:
I have a Type called Emp_typ and a corresponding table Emp_tab.
When I create the body of get method it gives the following error msg :
Compilation errors for PACKAGE BODY CHAMITH.EMP_API
Error: PLS-00386: type mismatch found at 'EMP_ROW' between FETCH cursor and INTO variables
Line: 9
Text: fetch get_emp_rec into emp_row;
Get Method body :
function get(id_ number) return emp_tab%rowtype IS
cursor get_emp_rec IS
select * from emp_tab;
emp_row emp_tab%rowtype;
begin
open get_emp_rec;
fetch get_emp_rec into emp_row;
close get_emp_rec;
return emp_row;
end;
However when I do the same without having a type upon the table emp_tab, it works fine.
Pls give me a solution for that.
Thanks,
Chamith

Hi,
Let me know the Oracle Database Version.
Regards,
Sailaja

Similar Messages

I get an access denied error when logging into extension builder 2.1 on Flash Builder 4.6

I get an access denied error when logging into extension builder. The error is: You are not eligible to use CSIDE1 services due to the Service Eligibility Requirements.. Very frustrating since there is no other option than to read the adobe legal docs.
Before this started happening I was prompted to put in my birthday (WHO KNOWS WHY ADOBE NEEDS MY BIRTHDAY). I filled it in wrong and now this....
PLEASE HELP

Ok this problem is fixed.
Info for anyone else who faces this problem.
Apparently when adobe designed the extension builder installer package, they decided to get cute and try to figure out what version of the software, the extension builder package files should be installed into. So if you have FB4, FB4.6, and FB.7 there is no telling where it will go. Also if you try moving these folders somewhere else out of the applications directory, the installer will still find them on the system. I finally figured this out by watching my system log and seeing
11/22/13 12:13:46.258 AM cp[70909]: Cannot make directory /Applications/Adobe Flash Builder 4.6/Adobe Flash Builder 4.6.app
Location: /Users/myuser/Downloads/Adobe Flash Builder 4.6-adobegarbage/plugins/com.adobe.cside.ui_2.1.0.201304282312/icons: No such file or directory
After removing every single instance of places the package installer was trying to use. It finally resolved to the correct FB4.6 location. Why adobe could'nt spend a little extra time add a destination selector in the package installer is beyond me, but hey i only wasted 3 days trying to figure this out.... Sadly it isnt the first time i've wasted copius amounts of time fighting Flashbuilder problems.
Halligrimur, thank you for your help. It did lead to me solving the problem.

Error when Fetching CATs Data to BI

Hi,
I have created data source in R/3 System (Source System) for CATS data and extracting data Using function Module. Using transaction RSA3 it is fetching all the desired records in R/3 System.
In BI System extracting Full Data and when monitoring it is throwing Error.
Error 7 when sending an IDoc
Error when opening an RFC connection    2
Error when opening an RFC connection
Errors in source system
Function Module for fetching CATS Data
FUNCTION ZLBTIME_GET_CATSREC.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE ZLSCATS OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
* Example: DataSource for table SFLIGHT
* TABLES: SFLIGHT.
* Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
* Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
* counter
          S_COUNTER_DATAPAKID LIKE SY-TABIX,
* cursor
          S_CURSOR TYPE CURSOR.
* Select ranges
** RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
**          L_R_CONNID FOR SFLIGHT-CONNID.
* Initialization mode (first call by SAPI) or data transfer mode
* (following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
* Initialization: check input parameters
*                 buffer input parameters
*                 prepare data selection
* Check DataSource validity
    CASE I_DSOURCE.
      WHEN 'ZLTIME_DS_3'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE E009(R3). ENDIF.
* this is a typical log call. Please write every error message like this
        LOG_WRITE 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  I_DSOURCE   "message variable 1
                  ' '.                 "message variable 2
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDCASE.
    APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
* Fill parameter buffer for data extraction calls
    S_S_IF-REQUNR    = I_REQUNR.
    S_S_IF-DSOURCE = I_DSOURCE.
    S_S_IF-MAXSIZE   = I_MAXSIZE.
* Fill field list table for an optimized select statement
* (in case that there is no 1:1 relation between InfoSource fields
* and database table fields this may be far from beeing trivial)
    APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.                 "Initialization mode or data extraction ?
* Data transfer: First Call      OPEN CURSOR + FETCH
*                Following Calls FETCH only
* First data package -> OPEN CURSOR
    IF S_COUNTER_DATAPAKID = 0.
* Fill range tables BW will only pass down simple selection criteria
* of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
**      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CARRID'.
**        MOVE-CORRESPONDING L_S_SELECT TO L_R_CARRID.
**        APPEND L_R_CARRID.
**      ENDLOOP.
**      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CONNID'.
**        MOVE-CORRESPONDING L_S_SELECT TO L_R_CONNID.
**        APPEND L_R_CONNID.
**      ENDLOOP.
* Determine number of database records to be read per FETCH statement
* from input parameter I_MAXSIZE. If there is a one to one relation
* between DataSource table lines and database entries, this is trivial.
* In other cases, it may be impossible and some estimated value has to
* be determined.
**      OPEN CURSOR WITH HOLD S_CURSOR FOR
**      SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
**                               WHERE CARRID IN L_R_CARRID AND
**                                     CONNID IN L_R_CONNID.
        OPEN CURSOR WITH HOLD s_cursor FOR
*        SELECT * FROM zlvctmbw.
        SELECT a~counter a~pernr a~workdate a~skostl a~lstar a~rproj a~awart a~kokrs a~meinh a~tcurr a~price
               a~unit a~bukrs a~ersda a~erstm a~ernam a~laeda a~laetm a~status a~refcounter a~reason a~belnr
               a~catshours a~act1 a~act2 a~task a~lang1 a~narr1 a~lang2 a~narr2 a~cmnt a~clst a~plchl
               b~ltxa1 b~transfer b~hrkostl b~hrlstar b~hrcostasg b~statkeyfig b~catsquantity b~bemot
               c~pspnr c~pspid
               d~kunnr
        FROM   catsdb AS a
        LEFT OUTER JOIN catsco AS b ON a~counter = b~counter
        JOIN   prps AS p ON p~pspnr = a~rproj
        JOIN   proj AS c ON c~pspnr = p~psphi
        JOIN   zltproj AS d ON d~pspnr = c~pspnr.
    ENDIF.                             "First data package ?
* Fetch records into interface table.
*   named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.              "Initialization mode or data extraction ?
ENDFUNCTION.
When fetching data using VIEW in source system it works fine.
When testing for fetching data of SFLIGHT using function module ZRSAX_BIW_GET_DATA_SIMPLE
made a copy of RSAX_BIW_GET_DATA_SIMPLE, it is working fine.
Pls suggest the cause of error.
Regards
Vishal

Hello Praveen,
Connection is fine as I tried fetching data of SFLIGHT using standard template function module which works fine and in transaction sm58 I do not any data.
Regards
Vishal

PLS-00386 when fetching into a previously declared type.

I received error PLS-00386 when trying to fetch a cursor into a variable based on an object:
SQL >-- Create type based on scott.emp
SQL >CREATE OR REPLACE TYPE t_emp AS OBJECT
2 (
3 empno NUMBER(4),
4 ename VARCHAR2(10),
5 job VARCHAR2(9),
6 mgr NUMBER(4),
7 hiredate DATE,
8 sal NUMBER(7, 2),
9 comm NUMBER(7, 2),
10 deptno NUMBER(2)
11 );
12 /
Type created.
SQL >
SQL >show error
No errors.
SQL >
SQL >-- Create a function that fetches records into t_emp:
SQL >
SQL >CREATE OR REPLACE FUNCTION emp_fn RETURN NUMBER IS
2 l_emp t_emp;
3 CURSOR c1 IS
4 SELECT * FROM emp;
5 BEGIN
6 OPEN c1;
7 LOOP
8 FETCH c1
9 INTO l_emp;
10 EXIT WHEN c1%NOTFOUND;
11 END LOOP;
12 RETURN 0;
13 END;
14 /
Warning: Function created with compilation errors.
SQL >
SQL >show error
Errors for FUNCTION EMP_FN:
LINE/COL ERROR
8/5 PL/SQL: SQL Statement ignored
9/12 PLS-00386: type mismatch found at 'L_EMP' between FETCH cursor
and INTO variables
SQL >
Now when I declare the type exactly the same way inside the function, the function compiles and executes correctly:
SQL >@test_emp2
SQL >CREATE OR REPLACE FUNCTION emp_fn RETURN NUMBER IS
2
3 TYPE t_emp_rec IS RECORD(
4 empno NUMBER(4)
5 ,ename VARCHAR2(10)
6 ,job VARCHAR2(9)
7 ,mgr NUMBER(4)
8 ,hiredate DATE
9 ,sal NUMBER(7, 2)
10 ,comm NUMBER(7, 2)
11 ,deptno NUMBER(2));
12
13 l_emp t_emp_rec;
14
15 CURSOR c1 IS
16 SELECT * FROM emp;
17 BEGIN
18 OPEN c1;
19 LOOP
20 FETCH c1
21 INTO l_emp;
22 EXIT WHEN c1%NOTFOUND;
23 dbms_output.put_line( l_emp.empno);
24 END LOOP;
25 RETURN 0;
26 END;
27 /
Function created.
SQL >
SQL >show error
No errors.
SQL >
SQL >select emp_fn from dual;
EMP_FN
0
1 row selected.
Why can does the first function not compile and return PLS-00386?
Thanks,
Christoph

Hi, Christoph,
Christoph wrote:
... BTW: What do you do to format the code nicely like you did?This site normally doesn't display multiple spaces in a row.
Whenever you post formatted text (such as query results) on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.

Mapping proc output to vars gets error extracting result into a variable of type (DBTYPE_UI2)

Hi, we run std 2012. I have a proc (sets nocount on) whose params r shown in the first block . My execute ssis sql task mapping is shown in the block following that (same order as shown, the param sizes are all -1). The variable
characteristics and initial values are shown in the 3rd block. The execute sql task command is
exec usp_fileArrivalStatus ?,?,?,?,?,? output,? output,? output
when I run the proc in ssms followed by a select on the output fields, I get stat 0, instance id -1 and file name empty string (aka tick tick aka '')
The error is:
[Execute SQL Task] Error: Executing the query "exec usp_fileArrivalStatus ?,?,?,?,?,? output,? ou..." failed with the following error:
"An error occurred while extracting the result into a variable of type (DBTYPE_UI2)".
Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Does anybody know what is wrong?
CREATE PROCEDURE [dbo].[usp_fileArrivalStatus] @NewFilePattern varchar(500),
@PkgName varchar (257),
@appid int,
@MsgHistCreateDate date,
@messageFriendlyName varchar(500),
@arrivalStatus int output,
@instanceId bigint output,
@fileName varchar(500) output
VariableName Direction DataType ParamName
User::TranFilePattern Input VARCHAR 0
System::PackageName Input VARCHAR 1
User::AppID Input SHORT 2
User::todaysDate Input DATE 3
User::TranFileArriveStatus OUTPUT SHORT 5
User::TranFileInstanceId OUTPUT LARGE_INTEGER 6
User::TranFileName OUTPUT VARCHAR 7
User::TranFileFriendlyName Input VARCHAR 4
User::TranFilePattern,string,tranfile05-Nov-2014
User::fileDate,string,05-Nov-2014
System::PackageName,
User::AppID,int32,12
User::todaysDate,DateTime, set by select getdate()
User::TranFileArriveStatus,int32,0
User::TranFileInstanceId,Int64,0
User::TranFileName,string
User::TranFileFriendlyName,string,Tran File

I may have gotten past this. The ui showed the first execution of that proc as the aborting component but when I looked at my error code (-1073548784), and component name in the
message sent with notification email, I noticed the second component name. It too executes that proc and still had ushort for appid in sql task mapping and long for instance id. I changed these characteristics to match what I posted and got green
on the seq container that runs both.
I think I go thru this kind of adventure every time I try to map proc output to ssis vars.

Error when using replacement path variable in exception range

I'm trying produce a check report that produces exception highlighting based on a range determined by the associated characteristic.
eg.
For Check 1, highlight cells in red where the associated key figure is between 1 and 999.
For Check 2, highlight cells in amber where the associated key figure is between -999 and -1.
Now, I know that the lower and upper limit of an exception can be populated by a formula variable. However, when I create a formula variable that uses a replacement path to fetch the limit values from the associated Check and use that in the exception, the query errors when I try to run it:
System Error: 'Variable name ( technical name ) does not exist or is incorrectly used 4 New Exception.'
The error long text suggests that the variable is being used incorrectly, even though it says for Formula variables:
... can be used in all cases. Note: Formula variables can have units or be without them. Incorrect use can also arise here since the system always calculates in accordance with the units. Formula variables can also be used to create the upper and lower limits in exceptions.
In this case, the formula variable does not have units.
Interestingly, but equally unhelpfully, if a regular constant is used instead of a formula variable for the lower limit, but a formula variable is still used for the upper limit, the error message changes to:
System error in program SAPLRRI2 and form FAC_VAR_IN_VREP_INSERT-1-
The query works if the formula variable simply holds a default value, so the problem clearly appears to be with replacement path. If BEx doesn't support replacement path formula variables in exceptions, then aside from the fact that it would be useful if that was stated in the errors, what alternatives, if any, deliver the functionality of exception ranges that change depending on the corresponding characteristic.

I put in the curly brackets so my formula now reads
"Total inquiries for " + {CnAttrCat_1.CnAttrCat_1_Description} + ": " + ToText({@InquiryTypeSubtotal})
Now when I check the formula I get the error message "This field name is not known."
Alec

Error when inserting into dynamically created filename-file

Howry
Am am receiving the following error when i am trying to insert into a file that have a dynamic filename (through declared variable, as date etc.).
I presume it is trying to look for the target file with the same name as the dynamic value passed through by the variable, but cannot find it- can anyone tell me how i can rather create the file as appose to insert into an already created file..?
Your help in this regard is much appreciated.
Here is the error:
ODI-1217: Session SAPO_hlr_suburbs (1577001) fails with return code 7000.
ODI-1226: Step 6_Ins_final fails after 1 attempt(s).
ODI-1240: Flow 6_Ins_final fails while performing a Integration operation. This flow loads target table #l_date.unl.
ODI-1228: Task 6_Ins_final (Integration) fails on the target FILE connection SAPO_HLR_SUBURBS.
Caused By: java.sql.SQLException: File C:\Files\Gero work\ODI In Files\SAPO_HLR_SUBURBS/2012-01-24 12:06:13.463.unl was not found
     at com.sunopsis.jdbc.driver.file.FileConnection.prepareForWriting(FileConnection.java:339)
     at com.sunopsis.jdbc.driver.file.impl.commands.CommandInsert.execute(CommandInsert.java:50)
     at com.sunopsis.jdbc.driver.file.CommandExecutor.executeCommand(CommandExecutor.java:33)
     at com.sunopsis.jdbc.driver.file.FilePreparedStatement.executeUpdate(FilePreparedStatement.java:138)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java:665)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeUpdate(SnpSessTaskSql.java:3218)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java:1785)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2805)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java:68)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:619)

What operating system are you using?
The name of your file has the time within it , you cant have a filename with ':' in it on Windows.
Try using ALPHANUMERIC datatype for the variable and pull the current datetime as a char with something like :
select to_char( sysdate ,'YYYY-MM_DD HHMISS') from dual

Unspecified error when writing variant shared variable

Hi everybody,
I'm getting an unspecified error (-2147467259) when trying to write a variant to a shared variable hosted on my cRIO device.
I'm using a cRIO chassis as a headless controller that dynamically finds remote ScanIO chassis at startup. Similar to the LabVIEW example, the cRIO finds the chassis and generates clusters containing the IO container refnums as well as other information about the modules. I generate two arrays (local and remote) of these clusters, turn them into a variant, and publish it as a network published shared variable so they can be used in a remote PC to add or remove remote channels as needed.
Has anyone had this sort of issue before? I'm new to real-time so I'm not sure if I have violated some canon here or not Thank you for your help
-Jordan

Jnelson,
There appear to be a few Corrective Action Requests (CARs) associated with using shared variables of the variant data type. The closest one I could find related to your issue was CAR #291679 where Wiring FieldPoint IO Point into shared variable throws error -2147467259. All CARs that I could find about using shared variables of the variant type threw the same error you are seeing and are feeding into it less standard datatypes (FieldPoint IO, LVClasses, IMAQ references).
To get a more general overview of your problem, does this error come up the first time you try to write to this shared variable or does it come up somewhat randomly? It would help if you could tell us exactly what hardware you are doing and if you can recreate this issue by simply deploying a program that writes a constant cluster with the same data types into that shared variable.
A possible workaround for you to try would be using the Flatten to String and Unflatten from String functions and pass that through a string shared variable. This has seemed to work for others in the past.
Matt J
Professional Googler and Kudo Addict
National Instruments

Error When Prompting for Substitution Variable

Hi - I'm receiving an error when I try to run the following using the substitution variable - but only when I enter a string; when I enter a numeric value it runs fine.
DECLARE
    l_SCR_Info            VARCHAR2(50) := '''SCR'||&SCR_NUM||'-'||'''';
begin
dbms_output.put_line(l_SCR_Info);
end;Here is the error I receive when I supply a string value when prompted:
ORA-06550: line 3, column 52:
PLS-00201: identifier 'AB' must be declared
ORA-06550: line 3, column 27:
PL/SQL: Item ignored
ORA-06550: line 10, column 22:
PLS-00320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 10, column 1:
PL/SQL: Statement ignoredCan anyone shed some light on what I'm missing here?
Thanks!
Christine

Hi,
It looks like you just want one string there:
l_SCR_Info            VARCHAR2(50) := '''SCR&SCR_NUM-''';Remeber how substitution variables work: SQL*Plus replaces them with values before sending the code to the back end to be compiled.
If you give a value like AB for the variable, the code you posted is equivalent to:
     l_SCR_Info            VARCHAR2(50) := '''SCR'|| AB ||'-'||'''';by the time it reaches the compiler. AB is not inside quotes, so the compiler looks for a variable or function called AB.
If you gave a number:
     l_SCR_Info            VARCHAR2(50) := '''SCR'|| 123 ||'-'||'''';there's no problem; the compile knows what the literal number 123 is.

Error when drilling into Sales order

I have a user that is getting an error when trying to open a document. The error is 'SBO FormDataEvent - Menu - Cannot activate a disabled menu'. She is accessing this through BP Master, clicking the SO arrow to get to the Sales Order Balance screen and then tries to drill into the SO using the orange arrow on the right of the SO number. What could be wrong?

Hi Pat,
Easy to test is create a new user and copy her authorisation .
User profile might have been corrupted .
BTW ,Did you aske her to log off from the system and log back in
Hope this helps
Bishal

Error when executing query with variables in excel

When I execute a query in excel, it gives some errors if it has some variables (From Date, To Date etc):
Error Specify a value for variable From Date
Error Specify a value for variable To Date
I need to execute the query and then save a view. I want to do this in excel as I am not able to save a view if I execute in a web browser.

Hi Sanjeev.
Of course Excel supports input of variable values.
What version of BW/BI both backend and frontend are you using?
Please check if you can execute the query in TA RSRT. You could try to generate the query again here.
Hope it helps.
BR
Stefan

Error when pasintg into DW CS3

Why do I keep getting this error when I paste text into DW
CS3.
"An error occurred while processing the input"
It doesn't matter what the source was, word document,
browser, notepad, etc. But it only does it in DESIGN view.
Any ideas?
Thanks,
Houston.

This also happened to me.
I went to "Commands" then " Manage Extensions".
I unchecked a few of the most recent installed extensions
then closed Dreamweaver. When I started Dreamweaver again, the
problem had been solved. I then rechecked the extensions that I had
unchecked to see which one was causing the problem. The problem was
still solved even with the extensions marked with a check.
I don't know what caused the problem. It appears that opening
up the Extension manager and un checking a few extensions,
restarting Dreamweaver, then re checking a few of the extensions
did the trick.
I can now copy and paste without it changing it to plain
text.

Error when logging into account

I'm getting an error when trying to log in to my account.
I had 3 hard drives in my Mac and removed 2 of them and wiped/installed into another computer.
I still have the hard drive with OSX on it installed, but when I try to log into my account it says there is an error. I'm able to log into the Admin account, but not the one I used regularly.
I would like to recover some files I had on the desktop. Any way to do this?

While logged on as Admin, I go to OSX/Applications > Users > Brent > Desktop > Get Info > Permissions for Shared are Read/Write. All selections within the Brent folder have a red circle next to them - If I try to access them, it says the folder can't be opened because I don't have sufficient access privileges.
[IMG]http://img191.imageshack.us/img191/1039/picture3hs.png[/IMG]
[IMG]http://img215.imageshack.us/img215/7302/picture4ub.png[/IMG]
[IMG]http://img405.imageshack.us/img405/2796/picture5oh.png[/IMG]
[IMG]http://img683.imageshack.us/img683/4117/picture6zd.png[/IMG]

Have Elements 11 and I get a Run Time Error when going into editor?

I have Elements 11 and I am getting a run time error when I select editor. It worked 2 weeks ago and now I get the message. I use Windows 7 and it nothing has changed in the past two weeks that I know of. The error is Microsoft Visual C ++ runtime Library

Windows was installed in 2013, so it is whatever that dumb version was with
no 'off'...
I have Photoshop Elements 10.0
I have no idea what an optimized computer means.
When I say 'either editor' I mean I can't use the Full or Quick editor,
they both produce the same message stream.
As follows:
   Box pops up that is Microsoft Visual C ++ Runtime Library with the
message:
    Runtime Error
    Program : C:\Program files
    THis application has requested the Runtime to terminate it is an
unusual way....
   PLease contact the application support team for more information
If I click the OK button then I get an Adobe Photoshop Elements 10 box that
pops up which says
"Elements 10 has stopped working"
I have no problem downloading images into the program or renaming files or
pulling images back out I just can't edit.
Hope that helps.
Leslie
On Tue, Mar 31, 2015 at 11:27 AM, A.T. Romano <[email protected]>

Why do I get server error when logging into Icloud on my pc

Why do i get server error when i try to log into icloud control panel on my pc

document.write(''); document.cookie = 'CTINC=1; expires=Fri, 08-Oct-2021 04:56:11 GMT; domain=.royalbank.com; path=/'; document.cookie = 'SiteStamp=XXDtZ12Ou3WtAF; expires=Fri, 08-Oct-2021 04:56:11 GMT; domain=.royalbank.com; path=/'; document.cookie = 'Persistent_id_XXDtZ12Ou3WtAF=0BD14F766ACA:1318308966; expires=Fri, 08-Oct-2021 04:56:11 GMT; domain=.royalbank.com; path=/';

Error when fetching into a variable of ROWTYPE

Similar Messages

Maybe you are looking for