Error when installing drivers & software for Photosmart C410a

Hi - I have a Photosmart C410a that I am trying to use with a 64-bit Windows 7 SP1 laptop, with an Intel i5-2520M CPU. The printer was working with this laptop a while ago (back in March), but I applied a Windows update sometime in March, and since then the printer has not worked. I've tried several times over the past few months, but have had the same result everytime. Today I've been working on this for 11 hours (no, I'm not kidding...)
I've tried downloading the latest full software suite and basic drivers (separately) from the HP website, and I tried using the CD that came with the printer. I tried the Windows 7 wizard and diagnostic utilities available on the HP website. I've tried setting it up with a USB cable and wirelessly. I've used the ccc uninstaller to get a clean start, and have followed the instructions of the troubleshooting guides. But no luck.
I have this printer installed on another Windows 7 64-bit system, using a wireless connection, and it is working fine. However, on the 2nd system I cannot get the software or drivers to install.
The error I get varies a little depending on if I try the USB or wireless installation method, but the consistent parts is "Exit Code = 1603". When trying to install with the USB cable the error is:
When I try the wireless install I get this:
I tried reregistering atl.dll and the windows installer (as suggested here http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02455020&lc=en&cc=us&dlc=en&product=4059652#N38...
Nothing has worked. Does anyone have any new suggestions? Thanks.

It appears if you are unlucky enough to get ths recurrent fatal error(asI I have) and are not a pc tech, you have purchased a door stop. I have purchased hp printers for years but this will be the last. Like the previous consumer, I have wasted countless hours on this correction.... Will never happen again. I will not double the cost of the printer paying consultants who swoop in like vultures to correct the problem.

Similar Messages

Error when installing CD Software for Treo 650

For some reason or another, it does not look like their are any scratches on my installation CD that I got with my Treo 650, but when I go to do the install, it almost completes the install and then it gives me an error message that says: Error 1316.A network error occurred while attempting to read from the file
C:\WINDOWS\Installer\palmOne.msi
I have no idea of why I can not install this CD to my computer, any help?
I no that this CD comes with the software so that I can sync my Treo with my Outlook, and that is all I am trying to do at this time.
Post relates to: Treo 680 (Rogers)

thanks so much for your reply, I thought it was XP but my hjusband might have installed Vista, I am going to check with him today when he comes home and then I will let you know, I did read that there was some issues with Vista though
thanks
D
Post relates to: Treo 680 (Rogers)

Error while installing printer software for HP Photosmart Plus 209a-m on Windows 8.1 64 bit OS

I am getting below error while installing printer software of HP Photosmart Plus 209a-m on Windows 8.1 64 bit OS. Can you please help me resolve this error? Thanks in advance.

Hi tarunkw,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the installation goes as expected.
If the issue persists continue following the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Error when installing Lenovo solutions for small business [Screenie included]

Hello everyone.
Recently, I tried opening the pre-installed Lenovo solutions for Small Business software on my Lenovo e530 running Windows 7 Professional 64-bit version (Upgraded from Win 7 Home Prem 64-bit) but failed after getting a message for encountering a critical problem of some sort. I then tried restarting my computer and that did not solve the problem. And then, I decided to install an upgrade version of it from this website http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS030146. But before that I uninstalled the previous version by uninstalling Intel Small Business advantage customizations with Revo Uninstaller and I deleted all the related folders too with a thorough scan. Out of my expection, I got this message below saying that I could not proceed due to some unspecified error. Has anyone encountered the same problem before? Does anyone have a solution for this? I'm not sure if that's my computer's problem or from the driver itself. Thank you for your attention to this issue.

Hi, dougy
This should be configurable under msconfig. This is a program that you can use to tell your computer which programs you want to start when Windows starts. To get to this program, type msconfig into the search bar in the Start menu. A window should appear. Check under the Startup tab and make sure that the Lenovo Solutions for Small Business program does not have a checkmark next to it. This should prevent this program from starting up when your computer turns on.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Error when installing drivers-WoW Wired Headset

This is the error i get when installing the drivers, firmware worked fine.
Error Code: -5004 : 0x80070005
Error Information:
>SetupDLL\SetupDLL.cpp (968)
PAPP:Sound Blaster World of Warcraft Headset
PVENDOR:Creative Technology Ltd (http://www.creative.com)
PGUID:0429B343-D023-4524-89BC-0478E0D9E3C3
$9..0.429
@Windows Service Pack 2 (6002) IE 8.0.600.8999

It appears if you are unlucky enough to get ths recurrent fatal error(asI I have) and are not a pc tech, you have purchased a door stop. I have purchased hp printers for years but this will be the last. Like the previous consumer, I have wasted countless hours on this correction.... Will never happen again. I will not double the cost of the printer paying consultants who swoop in like vultures to correct the problem.

"File Corrupt" error when opening Driver software for OfficeJet 4500 G510n-z

I'm trying to reinstall the software for my OfficeJet 4500 G510n-z printer and I have downloaded the drivers from the HP support site multiple times. Each time I try to open the file I get an error of "File is Corrupt" and it stops opening. I was able to eventually install the printer but not the HP Solution Software.
I am running 64-bit Windows 7.
As you can see below, I have the printer installed but not the Solution Center. How can I add the Solution Center?

What Anti virus software are you running?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Error when installing Oracle Lite for Mobile Field Service Laptop

Hi,
I am facing a strange problem when installing Mobile Field Service Laptop agent "Oracle Lite" on my laptop.
When I run the setup, it asks me username and password, after entering the information, when I proceed, I see setup window which displays below messages
"Authenticating with server... "
Please wait. This may take several minutes ...
Then it hangs for several minutes, approx 5 to 10 mins, and then gives message
"Could not connect to server: HTTP/1.0 502 Bad Gateway"
I am not able to proceed with setup.
But none of my other colleagues are facing this issue, even though the network, proxy settings and java version are same.
Any idea about this error?
Regards,
Mohammed

I thought polite.ini us required....how r u using MFS without polite.ini?

Two errors when installing oracle9i personal for win98

hi
i have installed a typical version of personal oracle9i for win98 on my e drive.i have windows 98 in c drive. While installing i got two errors:
1)error in writing to file e:\oracle9i\sqlj\lib\translator.zip
2)error in writing to file e:\oracle9i\assistants\dbca\templates\Seec_Database.dbf
Is it possible to perform a custom installation without these errors.
After installing by skipping those errors when i start sql plus i am getting these errors:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
-01017:invalid username/password; logon denied
one of the friends suggested that i start oracle services in control panel. but i don't have "oracle services" in my control panel of win98.
is there a way to overcome these errors.
thanks a lot in advance.

You get this error when you don't start the Oracle services. Please goto control panel and start the Oracle services and then try to login to solve the problem.
Note: Please post technical questions at
General Database Discussions
Regards,
Anupama

Driver Version Not Found" Error when installing drivers for X-fi Xtreme audio

I recently bought the game Bioshock off steam and have been unable to play as it crashes as soon as I try to launch it. After doing some digging around I found out it was a sound problem. When I was looking at the drivers for my sound card (Sound Blaster X-Fi Xtreme Audio) I noticed that the driver called:?XFXA_PCDRV_LB__04_0079.exe has a fix for Bioshock. However when I install the driver I get the error "Driver version not found". I am positi've it is the correct driver for my sound card. I am on Windows 7 64bit.

Hey!
I have Vista Ultimate x64 and I ran windows update couple days ago. There was a new update for my xtreme audio pci-e. I installed it and now my driver version in creative software update is .3.2. Before i updated i ran creative's own software update. It didn't find any new drivers. I was WTF. I think that new driver fixed my volume problem. I had problem's when there was a deep bass in a song. The sound card lowered volume levels then somehow. Now that happens no more. In vista's device control it shows the driver version as 6.0.0.203. Driver date is 7 october 2008.

Error when installing virtual appliance for r12.2.4

Hello
I have downloaded Oracle Virtual Appliance for Oracle E-Business r12.2.4 in a following step by step manner but I am running into an error. As per the readme, I have gone through the Note:1928303.1 but it does not address the issue.
That said, is there any comprehensive, step by step document that outlines installation and implementation of Oracle Virtual Appliance for r12.2.4?
Below are steps I ran.
Step 1: Downloaded and Installed Oracle Virtual Box version 4.3.22.
Step 2: I want to install Oracle EBS r12.2.4 single node installation on My Windows 8.1 64 bit laptop with 1 TB of HDD and 8GB RAM.
Step 3: Downloaded following files for single node vision appliance.
There are two zip files for each part, so I downloaded total 16 zip files.
V52470-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 1 of 8) Linux x86-64
V52471-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 2 of 8) Linux x86-64
V52472-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 3 of 8) Linux x86-64
V52473-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 4 of 8) Linux x86-64
V52474-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 5 of 8) Linux x86-64
V52475-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 6 of 8) Linux x86-64
V52476-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 7 of 8) Linux x86-64
V52477-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 8 of 8) Linux x86-64
Step 4: Unzipped these files
Step 5: After unzip, unzipped filename looked like following. So I removed the last digit in the extension so that Oracle virtual box can recognize .ova extension.
Unzipped file name:
Oracle-E-Business-Suite-12.2.4_VISION_INSTALL.ova.01
renamed to
01_Oracle-E-Business-Suite-12.2.4_VISION_INSTALL.ova
Step 6. In Oracle virtual box, attempted to import these ova files using "Import Appliance". This is when I am getting following error.
Oracle VM Virtual Appliances for Oracle E-Business Suite (Linux)
Failed to import appliance C:\ova\EBS\INSTALLATION OPTIONS\Option 1 Single Node ALL\0_Oracle-E-Business-Suite-12.2.4_VISION_INSTALL.ova.
Could not create the imported medium 'C:\Users\ova\VirtualBox VMs\Oracle-E-Business-Suite-12.2.4_VISION_INSTALL\Oracle-E-Business-Suite-12.2.4_VISION_INSTALL-disk1.vmdk'.
VMDK: Compressed image is corrupted 'C:\Users\ova\Oracle-E-Business-Suite-12.2.4_VISION_INSTALL-disk1.vmdk' (VERR_ZIP_CORRUPTED).
Result Code: (0x80BB0004)
Component: Appliance
Interface: IAppliance {3059cf9e-25c7-4f0b-9fa5-3c42e441670b}
This is happening with each and every file in above list.
Please advise what am I missing? And if there is a comprehensive document somewhere that outlines details about implementation. The above mentioned metalink note is not enough.
Darsh

You need to merge all of the downloaded files first, before importing into Virtualbox. Google for my blog for detailed steps.

Error when Installing Solution Manager for XI

Hi,
I am currently installing the SAP Solution Manager in a new server before I am going to install SAP XI. This is because I need the Solution Manager to generate a Key for the XI installation. I am choosing a typical installation. However, I keep hitting into Installation errors as below:
ERROR 2008-01-04 17:42:37.279
FSL-01002 Unable to create account sinitasd1201\SAPServiceDSS. HRESULT=0x80005009
ERROR 2008-01-04 17:42:37.279
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2008-01-04 17:42:37.279
FCO-00011 The step createAccounts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .
There are a total of 43 steps at the installation, and this error occurs at Step 2.
There are a few questions which I need some help:
1) Since the server is fresh, and it is a new installation, when defining parameters during installation, do I choose "Register in existing central SLD" or "Configure a new SLD"?
1a) If I need to choose "Register in existing central SLD", what values should I input for SLD HTTP Host, SLD HTTP Port, SLD Gateway Host and SLD Gateway Instant Number?
1b) If I need to choose "Configure a new SLD", what value should I input for the Object Server Name?
2) Any ideas what the errors above is about and how to solve them?
Please kindly advise, thank you.

Hi,
Thanks for your help. Now I am able to get pass step 2, and now I am hitting an error at step 34, "Start Java Engine". The error in the log file is:
ERROR 2008-01-09 09:48:08.629
CJS-30150 Java processes of instance DSS/DVEBMGS00 [ABAP: ACTIVE, Java: UNKNOWN] did not reach state PARTRUNNING after 20:00 minutes. Giving up.
ERROR 2008-01-09 09:48:08.629
FCO-00011 The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava was executed with status ERROR .
Do you know how to overcome this issue? Please kindly help. Thank you.

Vista - Error when installing drivers on Satellite A100-788

Hi,
I put Vista on my A100-788 (PSAA9), and the drivers available on the french Toshiba website.
But, when I try to install the Value Added Package (1.0.11BTN), the installation program respond with an error message :
.... NOTINSTALL .... (I don't remember exactly the message but it contains NOTINSTALLTVALZ or something like that).
Then the installation stops and get rid of me !
What's the problem ?

Hi
Hmmm without the exactly error message its not possible to say what could be wrong.
I assume you have a clean Vista installation on your notebook and also the BIOS was updated.
If not, do it!

Error when installing softw

I received the following error message when installing the software for Nomad Jukebox Zen Xtra:
"Sonic update manager has encountered a problem and needs to close."
Microsoft window appeared to report the problem. I reported it and its message was:
"An unknown error occurred in Storage Guard created by Sonic Solutions."
What do I do to correct this?

Download the updated software using the instructions here.

ISScript error when installing Palm Desktop

I am recieving the following error when installing palm desktop for a z22:
"1:The InstallScript engine is missing from this machine. If availible, please run ISScript.msi, or contact your support personal for further assistance,"
I know the setup app uses ISScript 11 so I have downloaded and installed it, but it is failing still. Does anyone have other suggestions?
some other info:
Platform: Windows XP Pro
Thanks in advance.
Paul
Post relates to: Zire

follow the steps provided. this is related to your problem.
Error - 1607: Unable to Install InstallShield Scripting Run Time
Update to the Latest InstallShield Installation Engines
http://knowledge.macrovision.com/selfservice/viewContent.do?externalId=Q108322&sliceId=1
When running into installation issues, it is always recommended that you use the latest InstallShield installation engines. This article contains steps on how to download and install the latest InstallShield engines for the installation version you are trying to install.
What to do?
Follow the Troubleshooting steps below:
Determine if the installation is compressed or uncompressed.
Launch Windows Explorer by pressing the Windows key + E or select Start > Run and type explorer.
Browse to the location of the installation files. For example, if the installation is on a CD, browse to the CD-ROM drive.
Search for the installation file. The typical names for installation files are setup.exe, update.exe, installer.exe, etc.
If the installation file is the only file in the directory (a single installation file), continue with the remaining suggestions in Step 1. Otherwise, if there are other files in the same directory as the installation file, continue to Step 2.
When a single installation file is run, it uncompresses the installation files into a temporary location (usually the Temp directory). Use these steps to find the installation in the temporary location:
Start the single installation file, but do not continue or cancel the installation dialogs.
Browse to the Temp directory. For further information on how to find the Temp directory, see Clean the Temp Directory.
Search for the installation file. The typical names for installation files are setup.exe, update.exe, installer.exe, etc. The uncompressed installation file should contain other files in the same directory. Continue with step 2.
Right-click on the installation file that you are trying to install and select Properties.
In the Properties dialog, click on the Version tab.
Look at the File Version field to determine the version number of the InstallShield engine you need. Follow the instructions for your version. If you started the installation in Step 1d, cancel it.
If the file version number is 2.0x or less:
Delete the folder C:\Program Files\Common Files\InstallShield\engine from the machine.
Download IkernelUpdate.exe.
Once downloaded, double-click it. This installs the InstallShield engine for your installation.
If the file version number starts with 6:
Delete the folder C:\Program Files\Common Files\InstallShield\engine from the machine.
Download IkernelUpdate.exe.
Once downloaded, double-click it. This installs the InstallShield engine for your installation.
If the file version number starts with 7:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\7 from the machine.
Download ISScript7.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the ISScript engine for the version of the setup.
If No:
If the file version is less the 7.01
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\0700 from the machine.
Download InstallShieldEngineUpdate700.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version is greater than or equal to 7.01:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\0701 from the machine.
Download InstallShieldEngineUpdate701.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 8:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\8 from the machine.
Download ISScript8.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript8.msi file. This installs the IsScript engine for this version of the installation.
If the file version number starts with 9:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\9 from the machine.
Download ISScript9.zip
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
If the file version is less the 9.01:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\09\00 from the machine.
Download InstallShieldEngineUpdate900.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version is greater than or equal to 9.01:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\09\01 from the machine.
Download InstallShieldEngineUpdate901.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 9.5:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\10 from the machine.
Download ISScript10.zip
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If the file version number starts with 10:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\10 from the machine.
Download ISScript10.zip
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
If the file version is less the 10.1 :
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\00 from the machine.
Download InstallShieldEngineUpdate1000.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version is greater than or equal to 10.1 :
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\01 from the machine.
Download InstallShieldEngineUpdate1001.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 10.5:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\1050 from the machine.
Download ISScript1050.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\50 from the machine.
Download InstallShieldEngineUpdate1050.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 11:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\11 from the machine.
Download ISScript11.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\11\00 from the machine.
Download InstallShieldEngineUpdate1100.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
Post relates to: Treo 680 (Unlocked GSM)

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

Error when installing drivers & software for Photosmart C410a

Similar Messages

Maybe you are looking for