Error when launching WDA app on IE8 with HTTPS - u201Cres://ieframe.dllu201D.popup

ECC 6.0, NW 7.0 SP20, Internet Explorer 8.0
I have a web Dynpro ABAP application being hosted on portal using an Iview.
The web AS protocol for the system is set to HTTP under System Administration.
I have 2 sets of users accessing this application, Internal and external users.
Internal Users login via intranet on to the portal with Http and the application works fine.
External Users login via an HTTPS site and they get the following popup.
u201CDo you only want to see the secure content u2026.u201D
On clicking yes u201CNo Information is displayedu201D on clicking NO we get another pop up which reads
u201CThe current webpage is trying to open a file on your computer
Do you want to allow this?
Current site :<>
File: res://ieframe.dllu201D
Clicking on yes or no, we get the browser error.
I tried changing the web AS protocol in system properties to HTTPS.
Then the internal users started receiving the 2nd popup about u201Cres://ieframe.dllu201D.
External users also received the same popup but the first pop was gone.
I read a few blogs which suggested making some changes in internet explorer security setting for trusted sites and also about resetting all zones to default levels. But the WDJAVA applications work fine for http as well as https.
I need to run my WDA application on http as well as Https so that internal and external users can access it. Is there any setting that can be done from Visual admin or elsewhere to get this working?
Can any of the experts please advice on this situation?
Regards
Vikas

The only way this might be possible is by using the HostContainer object
to access the HTML page and do it from there.

Similar Messages

Error when launching promoted app from RemoteAPP

Hi:
We are receiving this error when launching any application from RemoteAPP, we tried promoting Calculator, Notepad, etc. and received the same error as well.
"Personalization:
This theme can't be applied to the desktop.
Try clicking a different theme"
Help!
Thank you,
Stangride

If you launch the app directly from the session hosts using the same account that your using with remoteapp what are you getting? Try and RDP to the session host when you attempt it. I would also check rsop.msc to see if you have any GPO or scripts that
are manipulating themes.

Error when launching .rdp file from RDWebAccess with RD Gateway "NtlmWebAuthException: 2" on Mac Version 8.0.8 (Build 25010)

When launching a .rdp file that has been download from an rdwebaccess session, the following error is generated "NtlmWebAuthException: 2". I have tested this on the Mac Microsoft Remote Desktop client version 8.0.8 (Build 25010).
The following is the use case:
Download the .RDP file for a published app "notepad.exe", on rdwebaccess (2012R2), accessed through the gateway (2012R2) VIA the connection broker (2012R2) on a RDSH server (2012R2). NLA is enabled everywhere.
This same setup works on Windows using the Remote Desktop Connection client.
I found that if you edit the .rdp file and add the following line (no quotes):
"username:s: "
Then the user is prompted for credentials. You may also set it to be "username:s:domain\username".
This issue here appears that the Mac client is either ignoring the "prompt for credentials on client:i:1" setting, or it is passing blank credentials... or both.
I appreciate all the work the MS team (and iTap) have done on this product... keep up the great work.
Example failing RDP file:
redirectclipboard:i:1
redirectprinters:i:1
redirectcomports:i:0
redirectsmartcards:i:1
devicestoredirect:s:*
drivestoredirect:s:*
redirectdrives:i:1
session bpp:i:32
prompt for credentials on client:i:1
span monitors:i:1
use multimon:i:1
remoteapplicationmode:i:1
server port:i:3389
allow font smoothing:i:1
promptcredentialonce:i:1
videoplaybackmode:i:1
audiocapturemode:i:1
gatewayusagemethod:i:1
gatewayprofileusagemethod:i:1
gatewaycredentialssource:i:0
full address:s:RDCB.COMPANY.COM
alternate shell:s:||Notepad
remoteapplicationprogram:s:||Notepad
gatewayhostname:s:rdgateway.COMPANY.com
remoteapplicationname:s:Notepad
remoteapplicationcmdline:s:
workspace id:s:RDCB.COMPANY.com
use redirection server name:i:1
loadbalanceinfo:s:tsv://MS Terminal Services Plugin.1.Notepad
alternate full address:s:RDCB.COMPANY.COM
signscope:s:Full Address,Alternate Full Address,Use Redirection Server Name,Server Port,GatewayHostname,GatewayUsageMethod,GatewayProfileUsageMethod,GatewayCredentialsSource,PromptCredentialOnce,Alternate Shell,RemoteApplicationProgram,RemoteApplicationMode,RemoteApplicationName,RemoteApplicationCmdLine,RedirectDrives,RedirectPrinters,RedirectCOMPorts,RedirectSmartCards,RedirectClipboard,DevicesToRedirect,DrivesToRedirect,LoadBalanceInfo
signature:s:ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB

Hi,
I too have this problem but I am unsure of how you fo about adding the "username:s:domain\username"
into the file as it is downloaded via the RD Web Access page.
I know that I can edit the RDP file after the event and then send it to my users but I don't want the
hassle of doing this,
The weird thing is that ver 8.0.8 release notes say that there is a "Fix for the issues of starting remote connection from RDP files that included gateway information"
Anybody have any ideas?
Thanks,
Jaggie

Application Launch Failure error when launching various apps

When trying to open several different apps, an error message "Application Launch Failure" displays. The text of the message is:
The application "Flash Professional" could not be launched because of a shared library error: "<Flash> <CarbonLib> <CFMPriv_OpenScripting> "
The application listed depends on the one I am trying to launch. For example, when I try to launch Word the message is:
The application "Word" could not be launched because of a shared library error: "<Word> <CarbonLib> <CFMPriv_OpenScripting> "
I have not made any recent changes to my system and do not know how to resolve. Any suggestions?
Thanks!

I am having the same issue with my Mac Power PC G4. "The application Excel could not be launched because of a shared library error: 2<application><CarbonLib><CFMPriv_LaunchServices>"
I was reading your advice above. I don't have Leopard yet, so I was hoping there was a way to fix this problem with out moving to Leopard.
Also one more thing. This problem started after I did the newest Safari update. Not sure if that has anything to do with it, just thought you might need to know that.
Any help you could give me would be great!

Error when launching flex App?

ReferenceError: Error #1056: Cannot create property reserved
on _index_mx_managers_SystemManager.
What does this error mean? I have been debugging it for about
a week now :)

no line, it just gives me that error every once in a while
when the application is originally launched, but not every
time.

Error when launching Acrobat XI Pro

I get an error when launching Acrobat XI Pro:
Adobe License Utility has stopped working.
A problem has caused the program to stop working
correctly. Please close the program.

Hi toeneez,
Please try repairing Acrobat and check.
Try running the licensing fix patch available at : Error 213:19 | Problem has occurred with the licensing of this product | Acrobat X and XI
Regards,
Rave

After Effects Plugin Error when launching

I recently installed Red Giant Knoll Light Magic Pro plugin and get the following error when launching AE CS4 9.02 on a 2.53Ghz Intel Macbook Pro with 4Gb Ram and Snow Leopard.
After Effects has encountered an error.
[/Chincillada/pro/ext/adobe/MediaCore/MediaLayer/VideoFilterHost/Make/Mac/../../Src/AEPlug inVideoFilterModule.cpp-107]
then I get:
After Effects can't continue: An output contract violation has occured!
then:
After Effects warning: Failed to initialize mediacore
I have also lodged a support ticket with Red Giant but wanted to see if anyone had experienced, or could shed any light on this error code.
Thanks

As a start, move the KLF plug-in out of the shared MediaCore folder (Library:Apllication Support:Adobe and something; not on my Mac ATM) to the conventional AE plug-in folder (Applications:Adobe After Effects CS4:Support Files:Plug-Ins) I've reminded my friends at RG a hundred times, but their installer stil luses bad default locations. If that doesn't fix it, then indeed you have a problem. Which version of the plug-in are you using? Most complaints revolve around v2.5's GPU usage, which is on by default and causes a lot of trouble. Older versions do not do this, so they are more stable....
Mylenium

Error occurred in deployment step 'Install app for SharePoint': There were errors when validating the App manifest.

Hi everyone,
I `m getting error message like this "Error occurred in deployment step 'Install app for SharePoint': There were errors when validating the App manifest.". when i try to debug the application with "Start Action"="Internet Explorer".This
application is an apps for office application with Oauth with Office 365
Any help in this regard is greatly appreciated
Thanks!!
Santosh Sutar

Thanks Fei for your time.
>>>I would suggest that you create a new project and set it start action with 'Internet Explorer'
to see whether this issue could be reproduced. If no, we can compare the difference between the two menifest files.
As per your suggestion above ,With new project,I can debug with with start action "Internet Explorer" and I
could not see much difference between the manifest files.
Please find below my manifest file for the reference .
<?xml version="1.0" encoding="UTF-8"?>

<OfficeApp xmlns="http://schemas.microsoft.com/office/appforoffice/1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="TaskPaneApp">
<Id>084cd6cd-2908-44d1-a5cf-4fa029aec211</Id>
<Version>1.0.0.0</Version>
<ProviderName>[Provider name]</ProviderName>
<DefaultLocale>en-US</DefaultLocale>
<DisplayName DefaultValue="Office 365 MVC" />
<Description DefaultValue="Office 365 MVC"/>
<AppDomains>
<AppDomain>https://login.microsoftonline.com</AppDomain>
</AppDomains>
<Hosts>
<Host Name="Document" />
<Host Name="Workbook" />
</Hosts>
<DefaultSettings>
<SourceLocation DefaultValue="~remoteAppUrl/Home/Index/" />
</DefaultSettings>
<Permissions>ReadWriteDocument</Permissions>
</OfficeApp>
Please suggest on this.
Thanks !!
Santosh Sutar

'Install App for SharePoint' There were errors when validating the App Package

Hello,
When testing with an app, I tried to add an
app event receiver before learning that remote event receiver are not allowed with
Sharepoint-hosted app. So I reseted the Handle app installed and
Web Project properties of my project and tried to redeploy and this error occurred :
'Install App for SharePoint' There were errors when validating the App Package
Something other than the project's properties have been modified but I don't know what.

I think the best way to figure real reason out is to look at ULS logs.
This is example, what I had:
Unexpected App Packaging: CreatePackage: Unexpected exception: There were errors when validating the App package: There were errors when validating the App Package. Other warnings / errors associated with this
exception: The current version of SharePoint is less than the SharePointMinVersion specified in the app manifest. CurrentVersion='15.0.4693.1000', SharePointMinVersion='16.0.0.0'.

Java Error when launching BLS

Using xMII 11.5 SP3, one of our other xMII developers is getting the following Java error when launching the BLS editor:
Unable to load resource: http://xmiid.oxy.com/Lighthammer/CMSLogicEditor/activation.jar
His computer was reimaged a couple of days ago with our standard image (Windows XP SP2, IE6 SP2). It worked fine on his computer prior to the re-image. He's reloaded Sun Java 1.4.2_01 on his computer (our company default is 1.4.1_01.)
I can't duplicate the error on any of our test computers - one of which was also recently re-imaged.
Any ideas?
David

David,
So other standard imaged machines are running 1.4.2_01 and have no issues? I would expect to see problems with the webstart cookie handling for that version, but I'm running _15....
Try clearing the Java WS cache on the problematic client instance to watch it try to download all the libraries fresh.
File...Preferences, reconfirm that the None radio button is selected on the General tab, and then on the Advanced tab, press the Clear Folder button.
You could also make sure before hitting the editor link in the Menu.jsp that there are no dead or leftover javaws processes running in the task manager.
Regards,
Jeremy

TS1702 unknown error when using the app store

unknown error when using the app store

Im sorry I will try to be more clear.. and I appreciate all of ur input. Wi-fi works fine.. everything opens and functions fine on the I pad. The problem is I will click on app store or the I tunes store...it opens fine and I am able to look at and download apps etc... but after being in the appstore or I tunes store for a couple of minutes I get kicked out to the I pads home screen. Its like pushing the home button but I didn't. It only seems to do this when im in the app store or I tunes store. I have been using the chrome browser and other downloaded apps such as ebay just fine with out this problem occurring. Not sure about safari as I dont use it and use chrome instead. Um I don't think the home button its self is faulty because it works fine and as stated before this only happens when I am in the appstore or I tunes . I've only had this I pad 1 64gb wi-fi for a few days .. I got it off of ebay it was stuck in restore mode getting error code 1611. I was able to successfully Restore it with I tunes and it running ios 5.1. Seams to work great besides the problem being mentioned.

HT203242 I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

App will not download to iPad when purchased from App Store - stuck with Cloud icon

Device : iPad Air 32gb wi-fi model (not cellular data)
OS version : 7.1.1 (up to date)
Location : UK
Problem : App will not download to iPad when purchased from App Store - stuck with Cloud icon
Last night I tried to download an app over wi-fi onto my iPad Air, but the app did not install.
I have plenty of space (the app is 24.1mb, I have 3.4gb free space) and there are no restrictions whatsoever on my iPad - no blocks on App store purchases, no age-related restrictions, no country restrictions etc.
Normally from the App Store page you would tap the price (in this case the app was free), enter your iTunes password, and the app would download.
Also a new icon appears on the home screen and a circle shows the progress of the download.
However this did not happen.
Instead I have the Cloud icon (the one that shows when you have bought an app but it is not currently installed on your device) and a message that says "You've already purchased this, so it will be downloaded now at no additional cost".
If I press OK I am then prompted to enter my iTunes password, the Cloud symbol briefly changes to a circle (and I mean for a split-second, like the blink of an eye) and then the Cloud symbol appears again.
The app does not download - in fact it does not even *attempt* to download.
I have tried this >20 times now and it always occurs excatly like this.
After Googling this problem (which seems common) and reading over a dozen threads on this forum plus Apple's own official support pages, this is what I've tried:
I can re-download other apps that I have previously purchased on this iPad, with no problems.
I purchased another app on my iPhone 5 and was then able to download onto my iPad with no problems.
I have reset my iPad >5 times - both by pressing/holding the home/power buttons, and also a full switch off and restart.
I have logged out of my iTunes account on the iPad, and logged back in.
The wi-fi is Virgin Media fibre optic broadband with a verified speed of 20 meg (confirmed by Speedtest) plus an 802.11-n Belkin router and my iPad will happily load web pages, stream videos on YouTube, download other apps etc.
I have reset/rebooted my internet connection
In an attempt to eliminate by broadband connection from the possible causes, I have switched off my router, linked my iPad to the hotspot feature on my iPhone and tried to download the app over cellular data, but still cannot download the app.
I have tried on 2 other wi-fi networks but still cannot download this one app.
My iTunes account has a cerdit balance from an iTunes card, but the app was free anyway
Nothing I try will download the app in question.
The app is iPad only, so I cannot install on my iPhone to try and kick-start the process.
I guess I could install the app on my computer and then sync the iPad, but that's *working around* the problem - it's not *fixing* the problem.
(Since getting the iPad I use almost never use my computer. And anyway what if I did not have a computer? Didn't iOS go "PC-free" with version 5?)
I would like to call Apple but my 90-day telephone support has expired (the iPad is around 6 months old) and I don't want to buy Apple Care for this one problem.
I can't make it to an Apple Store to speak to a Genius.
Bearing in mind the list of things I've already tried, what do I do next?
Thanks in advance for any support.

Hi there.
Thank you very much for your quick reply, it's really appreciated.
No need to apologize, I actually found the phrase "If your iPad ever craps the bed" amusing under the circumstances
I checked the list of installed apps like you suggested (Settings>General>Usage>Storage>Show all apps) but this problem app is not in the list. I have also swiped down on the home screen to search for it, but again it does not show.
While it has not let me download the app (and I just tried it again) it has helped me to eliminate a few things from the list of what to try, and I can definitely conclude that it has not downloaded.
I guess I need to fire up my PC and download it / sync my iPad.
Thanks again for your help

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

Error when launching Crystal XIR2 report ..."Table could not be found."

We have a customer that sees an error when launching any report in InfoView for Crystal Server XIR2:
Description: Error in File E:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Data\slvnsb41.pageserver\slvnsb41.pageserver\child.2\temp\procReportTemp\mgrTemp\ps_13ec5b68e6bfbc0.rpt: The table could not be found.
These steps have been taken:
1) The Crystal Server Business View install and BIAR file imports are successful.
2) Database connection has been configured and tested.
3) All the tables are browseable in the Business View Manager and contain data.
4) All the required tables exist in the database.
Options or suggestions anyone?

Can someone tell me how to open this as a SUPPORT CASE that someone will actually help solve?
Sorry to say but I don't find these forums of much use.

Error when launching WDA app on IE8 with HTTPS - u201Cres://ieframe.dllu201D.popup

Similar Messages

Maybe you are looking for