Error when loading data from PSA TO Target(ODS)

I am getting the following errror:-
The value ' 20080712143841' from field CRM_CHANGED_AT is not convertible into the DDIC data type DATS of the InfoObject in data record 61. The field content could not be transferred into the communication structure format.
The data to be loaded has a data error or field CRM_CHANGED_AT in the transfer structure is not mapped to a suitable InfoObject.
plz help

Hi Anup,
To rectify this problem you need to write a routine in transfer rule for that characteristic.
for ur reference iam giving here one sample code-
*here iam refereeing data filed as ZSF_CLSDT*
Data: l_date(10) type c.
data: l_yyyy(4) type n,
l_mm(2) type n,
l_dd(2) type n.
l_date = TRAN_STRUCTURE-/BIC/ZSF_CLSDT.
split l_date at '-' into l_yyyy l_mm l_dd .
concatenate l_yyyy l_mm l_dd into RESULT.
it will give me date as YYYYMMDD.change this code according to your convenience.**

Similar Messages

Error in loading data from PSA to masterdataTables by using ProcessManually

Hello,
While loading Attribute master data to Masterdata tables, the data is loaded successfully to PSA but when I clicked process manually tab in the monitor screen to load the Attribute master data to Masterdata tables it is showing error.
Can anyone pls help me in solving this issue.
Thanks,
Soujanya

Hi Soujanya,
If it is a SAP BI 7 data flow, in order to load data from PSA to the InfoObject master data tables, you have to run the corresponding DTP.
On the other hand, if it is a SAP BW 3.x data flow, the InfoPackage should be configured so as to update data to subsequent targets (that is to say, the InfoObject).
Finally, take into account that if the DataSource provides duplicate records, the DTP or the InfoPackage (depending on the dataflow version) should be configured in order to deal with it. Otherwise, you could receive error messages during data load.
I hope this helps you.
Regards,
Maximiliano

Urgent : Error while loading data from PSA to DSO

Hi,
I am working on 7.0.
When i look for data into PSA then i have 1 date field which is containing data in proper date format. This date field is mapped with 0CALMONTH & 0CALYEAR for which i have written routine and directly assigned to 0DOC_DATE .
I have written a start routine to do some modifications in SOURCE_PACKAGE.
But When i am loading data from PSA to DSO its giving below error:
" Exception wrong_date ; see long text RSTRAN 303
Diagnosis
An exception wrong_date was raised while executing function module
RST_TOBJ_TO_DERIVED_TOBJ .
System Response
Processing the corresponding record has been terminated.
Procedure
To analyze the cause, set a break point in the program of the
transformation at the call point of function module
RST_TOBJ_TO_DERIVED_TOBJ . Simulate the data transfer process to
investigate the cause. "
I am not getting why this error is coming up
pls guide me !!

you can map the code to DOC_DATE .
The code is used to read from any date and convert that into Fiscal year/period.
Try this code.
data: l_fiscyear type t009b-bdatj.
call function 'FISCPER_FROM_CALMONTH_CALC'
exporting
id_date = COMM_STRUCTURE-doc_date
iv_periv = 'V9'
importing
ev_fiscyear = l_fiscyear.
result value of the routine
RESULT = l_fiscyear.

Error while loading data from PSA to DSO using DTP

Hi,
I have a Unique aplha numeric identifier of type "Char" length "32" . When I am loading the data from PSA to DSO using DTP I get the following error message:
"An error occurred while executing a transformation rule:
The exact error message is
Overflow converting from ' '
The error was triggered at the following point in the program:
GP4JJHUI6HD7NYAK6MVCDY4A01V 425
System response
Processing the data record has been terminated"
Any idea how I can resolve this....
Thanks

Hi,
fist check weather any special characteristics if not
check in data source under this we have fields tab check the format of a particular field format internal/external/check u choose internal format, if any check routine once
use Semantic Groups in the DTP.
Try it
Thanku
lokeeshM
Edited by: lmedaSAP_BI on Oct 20, 2010 6:44 AM

Error while loading data from PSA to DSO

Hi,
How to identify the erroneous records in DSO?
While loading the data from PSA to DSO through Process chains we are facing the error says:
"Value '#' (hex. '0023') of characteristic 0BBP_DELREF contains invalid characters"
"Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BBP_DELREF"
There is no error records in PSA but it seems some invalid characters exists.
Could you please help us how to find the error records in DSO and how to correct it.

Hi,
These are errors BRAIN290 & RSDRO302.
The problem here most likely is that BW doesn't recognise a character you are trying to load. Generally the character is not "#",
as BW displays all symbols it does not recognise as #. You should decode from the hex string what the actual value is. Note that hex values < 20 are not allowed in BW.
Please review Note 173241 and the document mentioned within.
This shows what characters are not allowed in BW characteristic values.
You should check if the character is allowed, and then you can solve the problem in one of the following ways:
1) add this character to the "permitted character" list in RSKC as described in the note.
2) correct the value in the source system.
3) correct the value in the PSA (to do this, you will need to delete the request from the ODS object and then you can change the disallowed character via the PSA maintenance).
4) follow Note 1075403 so that the characters HEX00 to HEX1F are not checked (this affects only characteristics that do not allow "lower case").
5) if you cannot use any of the above options, then you will need to create a routine in your transfer rules for the affected infoobject, and change the value to a character which is permitted in BW.
These are the usual ways to solve this issue.
Rgds,
Colum

Error while loading data from PSA to Infoobject through DTP(URGENT)

Hi-
I am running into an issue while loading the data from PSA to Infoobject.
It says
Data Package 1 : error during processing.
Updating Attributes for Infoobject
Error in substep
Process Terminated
Please let me know ur solution as this is very urgent....

Data Package 1 : error during processing.
This is the error when your flat file is opened at the time of scheduling. Pls close your flat file, will upload correctly.
Let me know if you have any further query.

Error when loading data from DSO to Cube

Hi,
After upgrading to 2004s we get the following error message when trying to load data from a DSO to a Cube:
Unexpected error: RSDRC_CONVERT_RANGES_TO_SELDR
Has anyone experienced a similar problem or have some guidelines on how to resolve it?
Kind regards,
Fredrik

Hej Martin,
Tack!
Problem solved
//Fredrik

ODI Error when Loading data from a .csv file to Planning

Hello,
I am trying to load data from a csv file to planning using ODI 10.1.3.6 and I am facing this particular error. I am using staging area as Sunopsis memory engine.
7000 : null : java.sql.SQLException: Invalid COL ALIAS "DEFAULT C12_ALIAS__DEFAULT" for column "ALIAS:"
java.sql.SQLException: Invalid COL ALIAS "DEFAULT C12_ALIAS__DEFAULT" for column "ALIAS:"
     at com.sunopsis.jdbc.driver.file.bb.b(bb.java)
     at com.sunopsis.jdbc.driver.file.bb.a(bb.java)
     at com.sunopsis.jdbc.driver.file.w.b(w.java)
     at com.sunopsis.jdbc.driver.file.w.executeQuery(w.java)
     at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.g.A(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Code from Operator:
select     Account     C1_ACCOUNT,
     Parent     C2_PARENT,
     Alias: Default     C12_ALIAS__DEFAULT,
     Data Storage     C3_DATA_STORAGE,
     Two Pass Calculation     C9_TWO_PASS_CALCULATION,
     Account Type     C6_ACCOUNT_TYPE,
     Time Balance     C14_TIME_BALANCE,
     Data Type     C5_DATA_TYPE,
     Variance Reporting     C10_VARIANCE_REPORTING,
     Source Plan Type     C13_SOURCE_PLAN_TYPE,
     Plan Type (FinStmt)     C7_PLAN_TYPE__FINSTMT_,
     Aggregation (FinStmt)     C8_AGGREGATION__FINSTMT_,
     Plan Type (WFP)     C15_PLAN_TYPE__WFP_,
     Aggregation (WFP)     C4_AGGREGATION__WFP_,
     Formula     C11_FORMULA
from      TABLE
/*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=Account.csvSNP$CRLOAD_FILE=Y:/1 Metadata/Account//Account.csvSNP$CRFILE_FORMAT=DSNP$CRFILE_SEP_FIELD=2CSNP$CRFILE_SEP_LINE=0D0ASNP$CRFILE_FIRST_ROW=1SNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=AccountSNP$CRTYPE_NAME=STRINGSNP$CRORDER=1SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=ParentSNP$CRTYPE_NAME=STRINGSNP$CRORDER=2SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Alias: DefaultSNP$CRTYPE_NAME=STRINGSNP$CRORDER=3SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Data StorageSNP$CRTYPE_NAME=STRINGSNP$CRORDER=4SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Two Pass CalculationSNP$CRTYPE_NAME=STRINGSNP$CRORDER=5SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Account TypeSNP$CRTYPE_NAME=STRINGSNP$CRORDER=6SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Time BalanceSNP$CRTYPE_NAME=STRINGSNP$CRORDER=7SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Data TypeSNP$CRTYPE_NAME=STRINGSNP$CRORDER=8SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Variance ReportingSNP$CRTYPE_NAME=STRINGSNP$CRORDER=9SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Source Plan TypeSNP$CRTYPE_NAME=STRINGSNP$CRORDER=10SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Plan Type (FinStmt)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=11SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Aggregation (FinStmt)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=12SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Plan Type (WFP)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=13SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Aggregation (WFP)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=14SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=FormulaSNP$CRTYPE_NAME=STRINGSNP$CRORDER=15SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CR$$SNPS_END_KEY*/
insert into "C$_0Account"
     C1_ACCOUNT,
     C2_PARENT,
     C12_ALIAS__DEFAULT,
     C3_DATA_STORAGE,
     C9_TWO_PASS_CALCULATION,
     C6_ACCOUNT_TYPE,
     C14_TIME_BALANCE,
     C5_DATA_TYPE,
     C10_VARIANCE_REPORTING,
     C13_SOURCE_PLAN_TYPE,
     C7_PLAN_TYPE__FINSTMT_,
     C8_AGGREGATION__FINSTMT_,
     C15_PLAN_TYPE__WFP_,
     C4_AGGREGATION__WFP_,
     C11_FORMULA
values
     :C1_ACCOUNT,
     :C2_PARENT,
     :C12_ALIAS__DEFAULT,
     :C3_DATA_STORAGE,
     :C9_TWO_PASS_CALCULATION,
     :C6_ACCOUNT_TYPE,
     :C14_TIME_BALANCE,
     :C5_DATA_TYPE,
     :C10_VARIANCE_REPORTING,
     :C13_SOURCE_PLAN_TYPE,
     :C7_PLAN_TYPE__FINSTMT_,
     :C8_AGGREGATION__FINSTMT_,
     :C15_PLAN_TYPE__WFP_,
     :C4_AGGREGATION__WFP_,
     :C11_FORMULA
Thanks in advance!

Right-clicking "data" on the model tab can you see the data?
In your code there's written:
P$CRLOAD_FILE=Y:/1 Metadata/Account//Account.csv
Is it right the double slash before the file name?

ERROR DURING LOADING DATA FROM PSA TO DSO IN "PRUEFMBKT"

Respected all
I am trying to load data through an r/3 field( pruefmbkt, char-40length) to infoobject. the data is coming correctly to psa but when i am loading it in to dso or infocube request is turning red giving following error message--
Value '010/12.05-112.15/hold on not operate' (hex.
'3031302F31322E30352D3131322E31352F686F6C64206F6E20') of characteristic
PRU_LSIL contains invalid characters
Message no. BRAIN060
Diagnosis
    Only the following standard characters are valid in characteristic
    values by default:
    !"%&''()*,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ.+
    Furthermore, characteristic values that only consist of the character #
    or that begin with ! are not valid.
    You are trying to load the invalid characteristic value 1. (hexidecimal
    representation 3031302F31322E30352D3131322E31352F686F6C64206F6E20).
Procedure for System Administration
    Try to change the invalid characters to valid characters.
    If you want values that contain invalid characters to be admitted into
    the system, make the appropriate setting in BW Customizing. Refer to the
    documentation describing the requirements for special characters and the
    possible consequences.
    For more information on the problems involved with valid and invalid
    characters, click here.
kindly give me the solution how to deal with this problem.
thanks
abhay

HI Abhay,
please check if the infoobject corresponding to field PRU_LSIL in BW system has lower case checkbox enabled in the infoobject properties, as the value '010/12.05-112.15/hold on not operate' coming from R/3 has lower case alphabets.
Hope this helps.
Regards,
Umesh.

Error when loading data from xml file

Hi,
I'm trying to load data into a table from XML file using ApEx DATA UNLOAD/LOAD interfaces .
ApEx version is 3.0.1 .
I'm getting this error:
ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing LPX-00222: error received from SAX callback function
How to find cause of the error ?
Janus

Tkank you for the simple but good advice :)
unfortunately even google didn't find many answers :
LPX-00222 + APEX ... NOTHING
LPX-00222 + ORA- ... 2 pages of something like
"Examine the additional error messages and take corrective action"

Short Dump error while loading data from R/3 to ODS

Hello,
while trying to load data into the ODS from R/3 I get the following short dump error message. How do I carry out step 1 in the below procedure. Where do i find the Activate Function. And idea?
Thanks,
SD
                                                                                Diagnosis
Form routine CONVERT_ITAB_RFC is incorrect in transfer program
     GP4C0LOLZ6OQ70V8JR365GWNW3K .
System Response
The IDoc processing was terminated and indicated as incorrect. The IDoc
     can be reimported at any time.
Procedure
1. Go to the transfer rule maintenance for your InfoSource
         ZFIN_TR_FLQITEM_FI and the source system DA_M_10 and regenerate the
         transfer program using the function Activate. Remove possible syntax
         errors on the basis of your conversion routines.
2. Restart the processing of this IDoc.
3. If the error occurs again search for SAPNet R/3 notes, and create a
        problem message if necessary.
Edited by: Sebastian D'Souza on Jan 13, 2009 3:22 PM

Hi.......
Goto RSA1>> then to source system tab (on left side) >> double click on the desired source system...........Then on the right side you have the Datasource tree..........there search the datasource and activate.......Also u can Replicate the datasource again.......and activate the Transfer rules using the program : RS_TRANSTRU_ACTIVATE_ALL
After this operation when come back to source system (R/3).........I think the error log line will be disappeared from SM58......... Then repeat the load.........
Also u can try to Activate the infosource once...........in RSA1.........before repeating the load....
Hope this helps......
Regards,
Debjani....

Error when load data from CRM 3.0 to BI 7.0

Hi
I have connect CRM 3.0 system with BI 7.0 the CRM is MDMP and the BI is Unicode.
When I run the BW extraction of the CRM Business Partner data I've a short dump that say GETWA_NOT_ASSIGNED
-.You address a field symbol that pointed to the line of an internal table that was deleted.
-.You address a field symbol that was previously reset using UNASSIGNED or that pointed to a local field that no longer exist.
-. You address a global function interface, although the respective function module is not active - that is, is not in the list of active calls. the list of active calls can be taken from this short dump.
When I check the RFC in CRM I've disable the Unicode option
I think that it's for the unicode because I've the last support package 12 installed in BI and the rest of the process chain are running perfect.
My hotmail mail is [email protected] if you need the screen shot.
Regards and thanks a lot
Jose

Hi Again.
When the BP data is load into BI update it in PSA but the error occur with the update rule and the load monitoring is yellow and I need change it to red to abort it.
Can you help to me?
Regards
Jose

Dtp error when loading data from one cube to another cube?

hi,experts
it seems strange that when I tick the some characteristics as navigational attributes in the cube , the error occurs during the execution of the DTP:error while updating to target Z* (Cube name ).
once i turn the flag off , no error appear. could anyone give me a clue ?
thanks in advance!

Hi,
When u make changes in the cube u need to make necessary changes in Transformation and activate the DTP.The checking of Navigational attributes in cube will appear in u r transformation as new fields where u need to create a mapping for them and then activate, also activate your DTP and then load the data. This should resolve your issue.
Regards

Error when i am loading data from PSA to ODS

hai Gurus
Very good morning
Actually i am loading data from PSA to ODS.
But when i am loading data i am getting the error InfoObject/BIC/0REFER_DOC does not contain ALPHA -CONFORMING VALUE 0.
Can anybody help me to solve the problem and reload the data
Thanks & Regards
Jayavardhan

Hi,
Lacs of postings are there in this forum on this topic. Searching teh forum is the best option for u now.
With rgds,
Anil Kumar Sharma .P

Error when loading data

Hi,
Please need help!
I get a strange error message when loading data from R/3 to BW. A lot of rows in the PSA get red with following description (I don't recognize the object REQUESTER):
"InfoObject REQUESTER does not contain alpa-conforming value 3511"
The help says:
"Diagnosis
The system checked whether the loaded InfoObject
value conforms to the conversion exit.The check
failed.
Forexample:
The value '1' was loaded into an InfoObject with alpha exit, even though the value '0000000001' was expected.
Systemresponse
The load process has failed or the erroneous records are displayed in the monitor. This does not depend on how error handling is set up.
                                                         Procedure
Find out why the data does not conform to the conversion exit, and, if possible, correct the cause. Possible causes are errors in Business Content or an error in a customer exit in the source system.
                                                         If you cannot correct the problem, you have the option of removing the conversion exit on the InfoObject. However, since the system has already been converted, duplicates appear in the system again.

Senor Roberto
I seem to have similar problem, the ALPHA conversion is existent at my Infoobject level and in my Comm Struc but not in mY Transfer_Structure/Transfer_Rules_.
I have already been running loads from ods to data target no problem and now out of a sudden the error msg
Err mess: "The value '1' was loaded into an InfoObject with alpha exit, even though the value '0000000001' was expected", appears.
I have tried removing alpha conversion from info object as u have recommended, and I have transported to QA but in QA the infooject status color is grey and it dosen't allow me to activate what should i do? What i would really like is to load ods data to data target without ever seeing this error again .
Any thoughts
Ciao

Error when loading data from PSA TO Target(ODS)

Similar Messages

Maybe you are looking for