Error when moving the TP to higher boxes

1.When trying to move a Function Module to higher box..i get an error which says IMPORT failed.
2.The detail description of error is:
Warning : Parameter DBLIBPATH is no longer used.
Warning : Parameter DBSWPATH is no longer used.
tp finished with return code : 8
meaning:
A tool used by tp produced errors.
What could be the possible reason for this error?

you can check the transport logs and consult your basis team to get the exact error details
Thanks
Bala Duvvuri

Similar Messages

Distribution Cycle KSV5 Resulting in error when deselected the test run chk

Hi Experts,
Please help me out
iam getting an error while running a Distribution Cycle KSV5 Resulting in error when deselected the test run chk box.
When run the same in the test run, there isn't any error log. but when i deselect the same & run iam getting an error like
First Message:
Balance per segment 9999 is not zero
Message no. FAGL_COFI025
Diagnosis
Balance per segment 9999 is not zero.
The balance on segment 9999 is 50.00 (transaction currency), 0.00 (object currency), and 50.00 (controlling area currency).
System Response
With the standard settings, postings cannot be made to the document because the balance for segment and partner segment does not amount to zero. This may be due to a programming error, or this setting may have been made (perhaps unintentionally) in the BAdIs for determining the segment or partner segment.
Procedure
If there is a programming error, please inform your system administrator.
If this behavior is intentional, you can deactivate error message FAGL_COFI 025 in Customizing or change the error message into a warning message or an information message.
2nd Message
Balance per segment 1000 is not zero
Message no. FAGL_COFI025
Diagnosis
Balance per segment 1000 is not zero.
The balance on segment 1000 is 50.00- (transaction currency), 0.00 (object currency), and 50.00- (controlling area currency).
System Response
With the standard settings, postings cannot be made to the document because the balance for segment and partner segment does not amount to zero. This may be due to a programming error, or this setting may have been made (perhaps unintentionally) in the BAdIs for determining the segment or partner segment.
Procedure
If there is a programming error, please inform your system administrator.
If this behavior is intentional, you can deactivate error message FAGL_COFI 025 in Customizing or change the error message into a warning message or an information message.
3rd Message
No update performed due to an error
Message no. GA719
Diagnosis
A serious error occurred during processing.
System Response
Processing is continued as far as possible, but results are not posted.
Procedure
This error is shown in the error list before this error message. Here you can find more information about this particular error.
I would appreciate an early reply........!!!
Thanks & Regards,
Neela

Hi,
Check notes 764652 and 897086; it might be helpful.
Regards,
Eli

'Error when generating the selection screen "0500"

Dear all,
I have copied a function group QEES to ZQEES through SE80. In that I have copied all screens, includes, function modules etc..
Now when I activate the ZQEES, I get an error 'Error when generating the selection screen "0500" of report "SAPLZQEES'.
There is no problem with screen 0500, I have activated it.
But when I activate ZQQES, I get the error.
Please let me know the reason for this.
It will be highly appr
Thanks in advance,
Sachin

Hi Sachin,
there could be a problem while copying in renaming, delete the Function group ZQEES and recopy the Standrad function group and only rename the the FM QEES_SHOW_SELECTION_SCREEN to ZQEES_SHOW_SELECTION_SCREEN and copy and activate it will work.
regards,
Srini

BW Statistics-BI7-Error when generating the update program

Dear All,
We faced the below problem in while executing the infopackages for BW statistics in BI7.0
7099 records from 7099 records..but shows request is red.
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Update rules ( 7089 -> 0 Records ) : Errors occurred (RED)
Update rules ( 7089 -> 0 Records ) : Errors occurred
InfoCube 0TCT_C23 will be updated
Error when generating the update program (RED)
Is there any notes to apply for this?
Initilaztion is executed with out any errors!!
Regards

Hi
Caller 01 : If there is any inconsistecy while loading the data or if the program cannot able to execute a specific task it will give the caller errors.
check in the transaction ST22
check for the OSS notes 631668, 860475
Check the below links which have a discussion on the same problem.
A caller 01, 02 or equal to or greater than 20 contains an error meesage
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
ERROR?
Data load System error
Hope this will help
Regards
Shilpa

LR4.2 - Error when moving files

I can repeatedly reproduce an error when moving files into folders within LR4.2.
My current folder structure is setup like:
F:\pictures\YEAR\Folder name\Sub folder\
When I'm moving files from "Folder name" to "Sub folder" I will be moving approx 6 - 20 photos at a time when sorting them into sub folders. After a while of moving files, LR will stop allowing you to move files and will show up the O symbol with a line through it. Until you close and re-open LR will it allow you to start moving photos again.
I've had this happen 3 times on me now and is completely reproducible. As above, move a small amount of files from a parent folder into a child folder repeatedly and eventually it will refuse to move any more photos until you restart LR.
Windows 7 x64 SP1 Professional
Intel Core i7 950 3.07Ghz
24Gb DDR3 Ram
Nvidia GTX470 Video Card
Intel 520 Series 240Gb SATA3 SSD
Lightroom 4.2 x64
Catalog recently optimised with no issues ever experienced with the catalog.

Hi,
I experienced the same problem and error message this morning ...and found that the following steps will resolve the error (at least when using LR 3 on a MAC):
(1) Open LR and rename all the files that you are trying to move by hitting the F2 button, (MAC shortcut)
(2) Look for any images that may have a '?' mark next to them and resolve if required. (The '?' indicates a file 'location' conflict within the catalogue, - ie you may have moved the files around outside of LR)
(3) While still within LR ....highlight all the files that need to be moved ....and drag and drop them into your preferred new location in the usiual way.
Hope this helps.
Cheers
Simon

Why am I getting a -50 error when moving music to my iTouch?

Why am I getting a -50 error when moving music to my iTouch?

As Jim as stated, you do not want the OS, video app, and media all competing for hard drive access.
It may have worked before, but that doesn't mean will work henceforth, as you have learned.
A FW800 portable drive will cost about $75.00.

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

Error message "Error when scheduling the query(JOB_CLOSE)".

Hi all,
While using query extractor (rscrm_bapi) I am getting error message "Error when scheduling the query(JOB_CLOSE)".
Could you please find what this error is?
Thanks,
Uday.

Hi Uday,
This problem can occur if you changed the query definition.
In this case the query definition would be inconsistent with the existing extract structure.
Certain Meta information is maintained with each extract defined using the RSCRM_BAPI. If the definition of the query is changed and you need to use the same extract table then you need to delete the extract using the report RSCRMBW_DEL_ALL_EXTRACTS selecting the extract you want
to delete.
After this you could use the same table name for any further extract that you need to create.
One caution is that the extract table should not be deleted through any other transaction before you run the report.
Rgds,
Colum

Error when installing the supporting objects of OLL Packaged Application

Hello,
I am trying to install OLL Packaged Application|http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/apex/r41/inst_pkgapp/inst_pkgapp.htm#top
but when installing the supporting objects, I got error when executing the code of "create_package_body"
Error at line 274: PLS-00201: identifier 'UTL_TCP' must be declared
create or replace package body eba_oll_log
as
g_start_time    number;
procedure log_init
is
begin
    g_start_time := dbms_utility.get_time;
end log_init;
procedure log_page_view
is
begin
   insert into eba_oll_page_views
      ( APEX_USER,
        PAGE_ID,
        PAGE_NAME,
        VIEW_DATE,
        TS,
        ELAPSED_TIME,
        IP_ADDRESS,
        AGENT,
        APEX_SESSION_ID,
        CONTENT_ID,
        CONTENT_TITLE )
   values
      ( v('APP_USER'),
        v('APP_PAGE_ID'),
        wwv_flow.g_step_title,
        trunc(sysdate,'DD'),
        systimestamp,
        (dbms_utility.get_time-g_start_time)*(.01),
        owa_util.get_cgi_env('REMOTE_ADDR'),
        owa_util.get_cgi_env('HTTP_USER_AGENT'),
        v('APP_SESSION'),
        case when v('APP_PAGE_ID') = 24
             then v('P24_CONTENT_ID')
             else null
             end,
        case when v('APP_PAGE_ID') = 24
             then v('P24_CONTENT_TITLE')
             else null
             end );
   if v('APP_PAGE_ID') = 24 then
      insert into eba_oll_content_views
         ( APEX_USER,
           VIEW_DATE,
           TS,
           IP_ADDRESS,
           AGENT,
           APEX_SESSION_ID,
           CONTENT_ID,
           CONTENT_TITLE,
           NOTE )
      values
         ( v('APP_USER'),
           trunc(sysdate,'DD'),
           systimestamp,
           owa_util.get_cgi_env('REMOTE_ADDR'),
           owa_util.get_cgi_env('HTTP_USER_AGENT'),
           v('APP_SESSION'),
           v('P24_CONTENT_ID'),
           v('P24_CONTENT_TITLE'),
           'Viewed' );
   end if;
   commit;
end log_page_view;
procedure log_content_click
is
begin
   insert into eba_oll_content_views
      ( APEX_USER,
        VIEW_DATE,
        TS,
        IP_ADDRESS,
        AGENT,
        APEX_SESSION_ID,
        CONTENT_ID,
        CONTENT_TITLE,
        NOTE )
   values
      ( v('APP_USER'),
        trunc(sysdate,'DD'),
        systimestamp,
        owa_util.get_cgi_env('REMOTE_ADDR'),
        owa_util.get_cgi_env('HTTP_USER_AGENT'),
        v('APP_SESSION'),
        v('P24_CONTENT_ID'),
        v('P24_CONTENT_TITLE'),
        'Launched' );
   commit;
end log_content_click;
end eba_oll_log;
create or replace package body eba_oll_api
as
function gen_id
   return number
is
   l_id number;
begin
   select to_number(sys_guid(), 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX')
     into l_id
     from dual;
   return l_id;
end gen_id;
function eba_oll_tags_cleaner (
    p_tags in varchar2,
    p_case in varchar2 default 'U' ) return varchar2
is
    type tags is table of varchar2(255) index by varchar2(255);
    l_tags_a        tags;
    l_tag           varchar2(255);
    l_tags          apex_application_global.vc_arr2;
    l_tags_string   varchar2(32767);
    i               integer;
begin
    l_tags := apex_util.string_to_table(p_tags,',');
    for i in 1..l_tags.count loop
        --remove all whitespace, including tabs, spaces, line feeds and carraige returns with a single space
        l_tag := substr(trim(regexp_replace(l_tags(i),'[[:space:]]{1,}',' ')),1,255);
        if l_tag is not null and l_tag != ' ' then
            if p_case = 'U' then
                l_tag := upper(l_tag);
            elsif p_case = 'L' then
                l_tag := lower(l_tag);
            end if;
            --add it to the associative array, if it is a duplicate, it will just be replaced
            l_tags_a(l_tag) := l_tag;
        end if;
    end loop;
    l_tag := null;
    l_tag := l_tags_a.first;
    while l_tag is not null loop
        l_tags_string := l_tags_string||l_tag;
        if l_tag != l_tags_a.last then
            l_tags_string := l_tags_string||', ';
        end if;
        l_tag := l_tags_a.next(l_tag);
    end loop;
    return substr(l_tags_string,1,4000);
end eba_oll_tags_cleaner;
procedure eba_oll_tag_sync (
    p_new_tags          in varchar2,
    p_old_tags          in varchar2,
    p_content_type      in varchar2,
    p_content_id        in number )
as
    type tags is table of varchar2(255) index by varchar2(255);
    l_new_tags_a    tags;
    l_old_tags_a    tags;
    l_new_tags      apex_application_global.vc_arr2;
    l_old_tags      apex_application_global.vc_arr2;
    l_merge_tags    apex_application_global.vc_arr2;
    l_dummy_tag     varchar2(255);
    i               integer;
begin
    l_old_tags := apex_util.string_to_table(p_old_tags,', ');
    l_new_tags := apex_util.string_to_table(p_new_tags,', ');
    if l_old_tags.count > 0 then --do inserts and deletes
        --build the associative arrays
        for i in 1..l_old_tags.count loop
            l_old_tags_a(l_old_tags(i)) := l_old_tags(i);
        end loop;
        for i in 1..l_new_tags.count loop
            l_new_tags_a(l_new_tags(i)) := l_new_tags(i);
        end loop;
        --do the inserts
        for i in 1..l_new_tags.count loop
            begin
                l_dummy_tag := l_old_tags_a(l_new_tags(i));
            exception when no_data_found then
                insert into eba_oll_tags (tag, content_id, content_type )
                    values (l_new_tags(i), p_content_id, p_content_type );
                l_merge_tags(l_merge_tags.count + 1) := l_new_tags(i);
            end;
        end loop;
        --do the deletes
        for i in 1..l_old_tags.count loop
            begin
                l_dummy_tag := l_new_tags_a(l_old_tags(i));
            exception when no_data_found then
                delete from eba_oll_tags where content_id = p_content_id and tag = l_old_tags(i);
                l_merge_tags(l_merge_tags.count + 1) := l_old_tags(i);
            end;
        end loop;
    else --just do inserts
        for i in 1..l_new_tags.count loop
            insert into eba_oll_tags (tag, content_id, content_type )
                values (l_new_tags(i), p_content_id, p_content_type );
            l_merge_tags(l_merge_tags.count + 1) := l_new_tags(i);
        end loop;
    end if;
    for i in 1..l_merge_tags.count loop
        merge into eba_oll_tags_type_sum s
        using (select count(*) tag_count
                 from eba_oll_tags
                where tag = l_merge_tags(i) and content_type = p_content_type ) t
           on (s.tag = l_merge_tags(i) and s.content_type = p_content_type )
         when not matched then insert (tag, content_type, tag_count)
                               values (l_merge_tags(i), p_content_type, t.tag_count)
         when matched then update set s.tag_count = t.tag_count;
        merge into eba_oll_tags_sum s
        using (select sum(tag_count) tag_count
                 from eba_oll_tags_type_sum
                where tag = l_merge_tags(i) ) t
           on (s.tag = l_merge_tags(i) )
         when not matched then insert (tag, tag_count)
                               values (l_merge_tags(i), t.tag_count)
         when matched then update set s.tag_count = t.tag_count;
    end loop;
end eba_oll_tag_sync;
procedure render_tag_cloud (
   p_selection          in varchar2 default null,
   p_app_id             in number,
   p_session_id         in number,
   p_min_nbr_tags       in number default 1,
   p_max                in number default 100,
   p_limit              in number default 10000,
   p_link_to_page       in varchar2 default '2',
   p_tag_item_filter    in varchar2 default 'P2_TAGS',
   p_clear_cache        in varchar2 default '2,CIR,RIR',
   p_more_page          in varchar2 default '62' )
as
   l_printed_records    number := 0;
   l_available_records number := 20;
   l_max                number;
   l_min                number;
   l_class_size         number;
   l_class              varchar2(30);
   type l_tagtype is table of varchar2(2000);
   l_tags l_tagtype;
   type l_numtype is table of number;
   l_cnts l_numtype;
   l_size number;
   l_total number :=0;
   l_buffer varchar2(32676);
   CURSOR c_all_tags
   IS
       select tag, c from (
       select t.tag, count(*) c
         from eba_oll_content c,
              eba_oll_tags t
        where c.content_id = t.content_id
          and c.display_yn = 'Y'
          and (p_selection is null or
               (p_selection is not null and
               (   (substr(p_selection,1,1) = 'R' and
                    substr(p_selection,2) in (select release_id
                                                from eba_oll_content_products cp
                                               where cp.content_id = c.content_id))
                or (substr(p_selection,1,1) = 'C' and
                    substr(p_selection,2) in (select product_id
                                                from eba_oll_content_products cp
                                               where cp.content_id = c.content_id))
                or (substr(p_selection,1,1) = 'P' and
                    (substr(p_selection,2) in (select product_id
                                                 from eba_oll_content_products cp
                                                where cp.content_id = c.content_id) or
                     substr(p_selection,2) in (select p.parent_product_id
                                                 from eba_oll_content_products cp,
                                                      eba_oll_products p
                                                where cp.content_id = c.content_id
                                                  and cp.product_id = p.product_id)))
                or (substr(p_selection,1,1) = 'G' and
                    (substr(p_selection,2) in (select pg.group_id
                                                 from eba_oll_product_groupings pg,
                                                      eba_oll_content_products cp
                                                where pg.product_id = cp.product_id
                                                  and cp.content_id = c.content_id) or
                     substr(p_selection,2) in (select pg.group_id
                                                 from eba_oll_product_groupings pg,
                                                      eba_oll_products p,
                                                      eba_oll_content_products cp
                                                where pg.product_id = p.parent_product_id
                                                  and p.product_id = cp.product_id
                                                  and cp.content_id = c.content_id)))
        group by tag
       ) x where rownum < p_limit
             and c >= p_min_nbr_tags
        order by upper(tag) ;
begin
   -- Fetch tags into arrays
   open c_all_tags;
      loop
          fetch c_all_tags bulk collect into l_tags,l_cnts limit p_limit;
          exit;
      end loop;
   close c_all_tags;
   l_available_records := l_tags.count;
   -- Determine total count and maximum tag counts
   l_max := 0;
   l_min := 1000;
   FOR i in l_cnts.first..l_cnts.last loop
      l_total := l_total + l_cnts(i);
      if l_cnts(i) > l_max then
         l_max := l_cnts(i);
      end if;
      if l_cnts(i) < l_min then
         l_min := l_cnts(i);
      end if;
   end loop;
   if l_max = 0 then l_max := 1; end if;
   l_class_size := round((l_max-l_min)/6);
   -- Generate tag cloud --
   sys.htp.prn('<div class="tagCloud"><ul>');
   for i in l_tags.first..l_tags.last loop
       l_printed_records := l_printed_records + 1;
       if l_cnts(i) < l_min + l_class_size then
          l_class := 'size1';
       elsif l_cnts(i) < l_min + (l_class_size*2) then
          l_class := 'size2';
       elsif l_cnts(i) < l_min + (l_class_size*3) then
          l_class := 'size3';
       elsif l_cnts(i) < l_min + (l_class_size*4) then
          l_class := 'size4';
       elsif l_cnts(i) < l_min + (l_class_size*5) then
          l_class := 'size5';
       else l_class := 'size6';
       end if;
       l_buffer := '<li><a class="'||l_class||'" href="'||
              'f?p='||p_app_id||':'||p_link_to_page||':'||p_session_id||':::'||p_clear_cache||':'||
              p_tag_item_filter||':'||htf.escape_sc(l_tags(i))||'">'||
              htf.escape_sc(l_tags(i)) || '<span>' || l_cnts(i) || '</span></a></li>';
       sys.htp.prn(l_buffer);
       l_buffer := '';
       if l_printed_records > p_max then
           exit;
       end if;
   end loop;
   sys.htp.prn('</ul></div>');
   -- print if there's more
   if l_tags.count - l_printed_records != 0 then
           htp.prn('<p><a href="f?p='||p_app_id||':'||htf.escape_sc(p_more_page)||
                 ':'||p_session_id||':::'||htf.escape_sc(p_more_page)||'">View all tags</a></p>');
   end if;
   exception when others then
      sys.htp.prn('<p>No tags found.</p>');
end render_tag_cloud;
procedure email_when_feedback (
   p_feedback_id in number,
   p_host_url     in varchar2,
   p_app_id       in number )
is
   l_body       clob;
   l_body_html clob;
begin
for c1 in (
   select f.feedback_comment, f.feedback_by,
          c.title, nvl(ct.feedback_contacts,'[email protected]') email
     from eba_oll_content_feedback f,
          eba_oll_content c,
          eba_oll_team ct
    where f.id = p_feedback_id
      and f.content_id = c.content_id
      and c.team_id = ct.team_id (+) )
loop
   l_body := 'You have received feedback for a piece of content you own in the Oracle Learning Library (OLL) Application.
Content: '|| c1.title || utl_tcp.crlf || '
Feedback: '|| c1.feedback_comment || utl_tcp.crlf || '
Left by: '|| lower(c1.feedback_by) ||'
You can respond via the OLL Application, '||p_host_url||'f?p='||p_app_id||':47:::NO::P47_ID:' || p_feedback_id || '.';
   l_body_html := '<div style="border: 1px solid #DDD; background-color: #F8F8F8; width: 460px; margin: 0 auto; -moz-border-radius: 10px; -webkit-border-radius: 10px; padding: 20px;">
<p style="font: bold 12px/16px Arial, sans-serif; margin: 0 0 10px 0; padding: 0;">
You have received feedback for a piece of content you own in the Oracle Learning Library (OLL) Application.
</p>
<table style="width: 100%;" cellspacing="0" cellpadding="0" border="0">
<tr>' || utl_tcp.crlf || '
<td style="font: bold 12px/16px Arial, sans-serif; color: #666; padding: 0 10px 10px 0; vertical-align: top;">Content</td>
<td style="font: normal 12px/16px Arial, sans-serif; padding: 0 10px 10px 0; vertical-align: top;"><a href="#" style="color: #000">'||c1.title||'</a></td>
</tr>
<tr>' || utl_tcp.crlf || '
<td style="font: bold 12px/16px Arial, sans-serif; color: #666; padding: 0 10px 10px 0; vertical-align: top;">Feedback</td>
<td style="font: normal 12px/16px Arial, sans-serif; padding: 0 10px 10px 0; vertical-align: top;">'||replace(c1.feedback_comment,CHR(10),'<br/>')||'</td>
</tr>
<tr>' || utl_tcp.crlf || '
<td style="font: bold 12px/16px Arial, sans-serif; color: #666; padding: 0 10px 10px 0; vertical-align: top;">Left by</td>
<td style="font: bold 12px/16px Arial, sans-serif; padding: 0 10px 10px 0; vertical-align: top;">'||lower(c1.feedback_by)||'</td>
</tr>
<tr>' || utl_tcp.crlf || '
<td colspan="2" style="text-align: center; font: normal 12px/16px Arial, sans-serif; padding: 0 10px 10px 0; vertical-align: top;">
<a href="'||p_host_url||'f?p='||p_app_id||':47:::NO::P47_ID:' || p_feedback_id ||'" style="display: block; padding: 10px; background-color: #EEE; font: bold 16px/16px Arial, sans-serif; color: #444">Respond to this Feedback</a>
</td>
</tr>
</table>
</div>';
   apex_mail.send (
      p_to        => c1.email,
      p_from      => '[email protected]',
      p_subj      => 'OLL - New Feedback for your team',
      p_body      => l_body,
      p_body_html => l_body_html );
end loop;
end email_when_feedback;
procedure email_when_response (
   p_feedback_id in number,
   p_host_url     in varchar2,
   p_app_id       in number )
is
   l_body       clob;
   l_body_html clob;
begin
for c1 in (
   select f.feedback_comment, f.feedback_by, f.response, c.title
     from eba_oll_content_feedback f,
          eba_oll_content c
    where f.id = p_feedback_id
      and f.content_id = c.content_id )
loop
   l_body := 'You have received a response to your feedback left in the Oracle Learning Library (OLL) Application.
Content: '|| c1.title || '
Feedback: '|| c1.feedback_comment || '
Response: '|| c1.response || '
You can also view this response via the OLL Application, '||p_host_url||'f?p='||p_app_id||':60:::NO::IR_ID:' || p_feedback_id || '.';
      l_body_html := '<div style="border: 1px solid #DDD; background-color: #F8F8F8; width: 460px; margin: 0 auto; -moz-border-radius: 10px; -webkit-border-radius: 10px; padding: 20px;">
<p style="font: bold 12px/16px Arial, sans-serif; margin: 0 0 10px 0; padding: 0;">
You have received a response to your feedback left in the Oracle Learning Library (OLL) Application.
</p>
<table style="width: 100%;" cellspacing="0" cellpadding="0" border="0">
<tr>' || utl_tcp.crlf || '
<td style="font: bold 12px/16px Arial, sans-serif; color: #666; padding: 0 10px 10px 0; vertical-align: top;">Content</td>
<td style="font: normal 12px/16px Arial, sans-serif; padding: 0 10px 10px 0; vertical-align: top;"><a href="#" style="color: #000">'||c1.title||'</a></td>
</tr>
<tr>' || utl_tcp.crlf || '
<td style="font: bold 12px/16px Arial, sans-serif; color: #666; padding: 0 10px 10px 0; vertical-align: top;">Feedback</td>
<td style="font: normal 12px/16px Arial, sans-serif; padding: 0 10px 10px 0; vertical-align: top;">'||replace(c1.feedback_comment,CHR(10),'<br/>')||'</td>
</tr>
<tr>' || utl_tcp.crlf || '
<td style="font: bold 12px/16px Arial, sans-serif; color: #666; padding: 0 10px 10px 0; vertical-align: top;">Response</td>
<td style="font: bold 12px/16px Arial, sans-serif; padding: 0 10px 10px 0; vertical-align: top;">'||replace(c1.response,CHR(10),'<br/>')||'</td>
</tr>
<tr>' || utl_tcp.crlf || '
<td colspan="2" style="text-align: center; font: normal 12px/16px Arial, sans-serif; padding: 0 10px 10px 0; vertical-align: top;">
<a href="'||p_host_url||'f?p='||p_app_id||':60:::NO::IR_ID:' || p_feedback_id ||'" style="display: block; padding: 10px; background-color: #EEE; font: bold 16px/16px Arial, sans-serif; color: #444">View Response in OLL Application</a>
</td>
</tr>
</table>
</div>';
   apex_mail.send (
      p_to        => c1.feedback_by,
      p_from      => '[email protected]',
      p_subj      => 'Oracle Learning Library - Response to your Feedback',
      p_body      => l_body,
      p_body_html => l_body_html );
end loop;
end email_when_response;
end eba_oll_api;
/Error at line 274: PLS-00201: identifier 'UTL_TCP' must be declared
Edited by: Fateh on Jan 13, 2012 7:32 AM

Thanks & Sorry for not mentioning the full information about my environment.
it was:
Oracle 11g xe R2 on Windows 7 machine
Apex listener deployed on Glass Fish server 3.1 on Windows 7 machine
Apex 4.1
Google Chrome
So, to have OLL application worked locally . we need the following:
grant execute on utl_tcp to [your_schema_name]And to
Configure an Application Express Application as a Partner Application in Oracle AS Single Sign-On http://www.oracle.com/technetwork/testcontent/sso-partner-app-100552.html.
I think I am going to install on my work space on apex.oracle.com.
Regards,
Fateh
Edited by: Fateh on Jan 15, 2012 9:38 AM

Error when generating the report in Production Server

Hi,
I have created one infoset query in Development server of my client. It is working fine there. I had transported the request containg this query to Production server. But whenever I am trying to generate report using this query in Production server it is giving an error message
"Error when generating the report".
I am not getting what 's problem.
Samriddhi

Samriddhi,
Genarally its not suggested to transport Queries. Should be able to create Queries directly Production. There might be diferences between your Development and Production versions.
Thanks.

Error when Activating the data store object

Hi All,
I have to get the following below errors when i was activating the ods.
Transfer structure prefix for source systemt T90CLNT is not defined
Error when creating the export datasource and dependent objects
could anyone help me on this issue.
Regards,
Naveen.
Edited by: naveen naveen on Feb 2, 2009 6:35 AM

Hi Naveen,
Check the Source System connection and Run program RS_TRANSTRU_ACTIAVATE_ALL in SE38 and give your Source system ID and Infosource. If you have infosource. or replicate your datasource.
and also Check the BW self System whether it is active or not. then try activating DSO
hope this helps
Regards,
Daya Sagar
Edited by: Daya Sagar on Feb 2, 2009 11:13 AM

Error when generating the report (see long text), Message no. AQ_AD_HOC221

Hi All,
I am facing a peculiar problem while executing an infoset query.I have created 2 customized fields Compa-ratio and PIR in infotype 0008 in an infoset.I have coded in these additional fields.
When I execute a query using 1 of these customized fields the report is generated correctly.But when I put both the fields in the output the report shows an error "Error when generating the report (see long text)". The message# associated with this errAQ_AD_HOC221.
I have also checked the data types and the references. Nothing seems to be wrong here.
Does anybody has any clue about this ?
Kajal

Hi Bernd,
I had a look at those notes. But the information provided did'nt prove to be helpful. I found out the problem. I was using the same local variable for both the fields in their code. This generated the error. This error is a very generic one and does'nt help in finding out what exactly is the problem.
I changed the other local variable and it started working. When I was using the same variable that time I did'nt forget to clear the values but the query still generated the error.
Anyways thanks a lot for the reply.
Kajal

Error when activating the master data

Hi
I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
<b>Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'</b>
If anyone came across this kind of problem plz share the solution.
Regards
Annie

Hi
I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
There are no short dumps in ST22
Regards
Annie

Error When Opening the Setup/Transactions/ Sources Window

Hi All,
in Oracle E-Business Suite R12 Version
Error When Opening the Setup/Transactions/ Sources Window
APP-FND-01388: Cannot read value for profile option FND_DEVELOPER_MODE in routine &ROUTINE.
ORA-01403: no data found
FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-06502.

Amr,
Please see the suggested solutions in these docs.
App-Fnd-01388: Cannot Read Value For Profile Option Fnd_developer_mode In Routine [ID 563884.1]
R12: How To Avoid The Error Message APP-FND-01388 On Drilldown [ID 556668.1]
R12 APXINWKB Error APP-FND-01388 When Trying To Query Invoice [ID 864195.1]
APP-FND-01388 Cannot Read Profile Option FND_DEVELOPER_MODE In Benefits Service Center Form [ID 422182.1]
Thanks,
Hussein

Getting the below error when running the Baseline.grf for the first time

I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
     at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
     at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
     at org.jetel.graph.Phase.free(Phase.java:487)
     at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
     at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
     at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
     at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
     at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
     at org.jetel.component.RunGraph.execute(RunGraph.java:302)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
     at org.jetel.component.RunGraph.execute(RunGraph.java:324)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !

It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
     LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com

Error when moving the TP to higher boxes

Similar Messages

Maybe you are looking for