Error when navigating to the PWA root site for Project Server 2010

I received a nice Happy New Year from my Project Server 2010 today. I tried to navigate to the root site and received the following error.
Error
The base type 'Microsoft.Office.Project.PWA.PJBaseWebPartPage' is not allowed for this page. The type is
not registered as safe.
Troubleshoot
issues with Microsoft SharePoint Foundation.
Correlation ID: b1898d3e-5d41-4ed4-9466-1d7775714293
Date and Time: 1/3/2012 10:54:53 AM
I did some searching and found that it could be one of 2 things
1.
App Pool security
2.
Custom Master page.
All the sub-sites seem to work fine, so I went with option 2. I changed the Master page of the root site back to v4.master and everything works fine again.
So far the only solution I found to allow for using a Custom master page is to modify the web.config as suggested here:
http://jimecox.wordpress.com/2011/05/03/project-server-2010-changing-master-page/
My custom master was working fine for the past 6 months, so I’m not sure why I need to make this new update.
Anyone else run into this recently with another fix? The changes seem to be opening the security on the Project web app a bit or am I wrong?
Thank you in Advance!

Looks like I fixed this by changing the Master page back to the OOTB version v4.master here:
https://<pwa url>/_Layouts/ChangeSiteMasterPage.aspx
Then I navigated to the PWA root site.
https://<pwa url>/default.aspx
Finally changed the master page back to my custom one. Error gone!

Similar Messages

Where can I find the web site ID of a project site in Project Server 2010?

Hi, I need to find the ID of the project site of a project in Project Server 2010 in order to be able to identify that web site in the Sharepoint Content DB (in the reporting DB, in Projects_View appears the URL of the project site but not its web
site ID). I need to list the documents stored in the project sites of the projects contained in the Project Center inside PWA.
Thank you very much
Regards
Carlos Negroni

Hi Mahesh:
Thanks but what I need is to link that ID with the related project in Project Server databases. Anyway I think I'll use the FullURL information to join the tables because that information appears in the Reporting Database of Project Server (although maybe
it is not the best alternative).
Regards

Need solution to make changes in existing project sites in Project Server 2010 environment

Dear Folks,
Hope you all are doing good and ready to give a way for this requirement. :)
In project server 2010 environment, I am using InfoPath documents library, Issues, Risks etc in each and every project sites.
Say, after creation of 100 projects/project sites, I have got a requirement to make some changes in the InfoPath document library and in Issues, Risks list, so I have decided to use the following solution which is actually weird:
Make the changes in InfoPath document library, Issues/Risks list for 1 of the project site and save that site as template and associate it with running EPT.
Then, delete the existing project sites (after taking backup) and start recreating it from PWA/Server Settings/ Operational Policies/ Project Sites, so that it will take the latest template. But, seems like it is time taking and handy and actually it's not
working for some of the projects.
Request all of you to provide some solution for this.
Ask more, if my explanation is not clear.
Regards,
Shravan

Hello,
Regarding mass deleting and recreating Project Sites via the PSI, firstly delete the project sites then run the following PowerShell script to bulk create project sites:
https://gallery.technet.microsoft.com/Bulk-create-Server-Sites-784f7b29
I have got a script that bulk deletes projects but this is not published as this could be a dangerous script to run if you did know what to update etc. To give you an idea of how to delete project sites via the PSI see a code snippet below:
$EPMTYGUID = [system.guid]::empty
$projectOwnerID = 'd6a0a720-12ac-e211-93f9-00155d153dd4'
$ProjectList = $svcPSProxy.ReadProjectStatus("$EPMTYGUID","PublishedStore","", "0").Project | format-table proj_uid -hidetableheaders | out-string -stream
foreach ($projectUid in $projectList)
if ($projectUid -ne "")
$projectsforDeletions = $svcPSProxy.ReadProject($projectUid, "PublishedStore").Project | where {$_.projectOwnerID -eq $projectOwnerID} | format-table proj_uid -hidetableheaders | out-string -stream
foreach ($projUid in $projectsforDeletions)
if ($projUid -ne "")
$svcWSSProxy.DeleteWSSSite($projUid)
Write-host 'Project UID for deleted site' $projUID
That particular example deletes the project sites for a particular project owner, you could easily modify that to remove the project owner filter if needed.
Regarding your query about having to delete the project sites to get the changes to take affect, there is no easy option to get the issues and risks list changes to filter though, this would either be manual on each existing site or using code to iterate
through each existing site and apply the changes programmatically. Depending on if you used site collection content types to set up the Issues and Risks lists, it might be simple to add a new column etc. as you could do this centrally and it will cascade
down. If you didn't use content types and or its view changes etc. this is a per site change that can be manual or programmatically done. The same applies to the document library, if this was set up using a site collection content type, the changes can
be modified on the content type and cascaded down. If the library was set up with just a library that used local columns / templates then it will be a per site change - the same as the issues and risks.
The company I work for (CPS) does have a site sync tool that will programmatically update existing sites based on a specified site so I know it is all possible to do in code!
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP

I can't see the workflow diagram in the out-of-the-box proposal workflow in Project Server 2010

Hello,
I created new project based on the template out-of-the-box proposal, but after that i can't see the following diagram ..

Hi,
To achieve this you can use Workflow Visualization webpart from Project Server 2010 Solution Starter Kit from
here.
Thanks !!!
Sachin Vashishth MCTS

Error when back at the form root

when i send a one format in the action form, and i back a
this form show this message "The form data has expired, Please
reload this page in your browser." how can do to recover the form
with click the button reload the page?

ok i find the solution, here show the solution:
in the tag cfform add timeout="10" when 10 are the seconds
that the form have the variables and the forms.
this is the example
<cfform name="decide" format="Flash"
timeout="10">

Error when i execute the webservice /SAPAPO/SDM_PARCRTRC

hi,
I am getting this error when i execute the webservice /SAPAPO/SDM_PARCRTRC for product availability. please tell me where am i going wrong ..... ? wat parameters are missing ? how to interpret this error?
An error has occurred. Maybe the request is not accepted by the server:
XML Serialization Error. Object content does not correspond to Schema restrictions of type [http://sap.com/xi/APO/Global][/wsdl:definitions/wsdl:types/xsd:schema[3]/xsd:complexType[3]/xsd:simpleContent/xsd:extension/xsd:attribute[1]/xsd:simpleType].
Quick response will be appreciated

hi,
due to the bad formatting of your posting it is hard to read. you might consider to use the code tag to enhance readability. moreover, 'executing a webservice' is a bit a vague description of what you do. are you consuming this service with any client program and this is throwing the exception or are you testing the webservice with any 3rd party tool and this is a server error returned to you?
anyway, I think you ttry to consume that service from within ABAP and the error message says a lot despite of its bad readability:
The client ist serializing a message (creating it from parameters) and is provided some argument for a parameter which doesn't conform to the WSDL. E.g. the WSDL declares some parameter to be an integer and between 0 and 100 and you try to supply it the value 234. THis would most probably result in your erromessage. or the WSDL says integer and you provided it a string (e.g. like 'foo' or '234').
anton

How I to restore the Project Site Deleted on Project Server 2010 ?

Hi
I have a questions, I deleted a Project Site from project server 2010, but I need restore this site Do you have any way for restore the project site.
Thanks a lot for the help

Ademir,
With 2010, you don't have to attach content database to another PWA. We can restore the site using unattached content database from Central admin
1. Restore backup of content database in SQL server
2. Launch Central Admin and Navigate to >> Backup and Restore >> Recover data from unattached content database.
3. Enter restored database name and select option export site or list
4. Export your desired site
5. Restore exported site using stsadm command with import switch
stsadm -o import -url "<a href="http:///<pwainstancename>/<workspacename">http://<servername>/<pwainstancename>/<workspacename>" -filename "c:\<backupdir>\<workspacename>" -nofilecompression
-includeusersecurity
Hrishi Deshpande – Senior Consultant DeltaBahn
Blog | < |
LinkedIn
Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you.This can be beneficial to other community members reading the thread.

Project Server 2010 - Assigned tasks not visible in PWA

Hi,
When I enter an issue on a project site, the assigned issue is not visible in the PWA under Issues & Risks.
Based on this link (http://social.technet.microsoft.com/Forums/en-US/f5abd024-3c9a-47f8-a7cb-7743fafebf2b/project-server-2010-cannot-see-assigned-issues-and-risks) I have tried to solve it however without success.
In the queue jobs I have the following error details:
General
Reporting Wss list sync failed:
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='6c8a0779-3c9f-4d25-a81c-04d69d6fce1d' SPListType='2136b7a0-03b9-4547-8b2d-c66497accd08' Error='1100'.
ReportingWssSyncListFailed (24018) - 1101. Details: id='24018' name='ReportingWssSyncListFailed' uid='1573855e-b176-44cc-bf92-8959d167f8fe' SPListType='2136b7a0-03b9-4547-8b2d-c66497accd08' Error='1101'.....................................
Reporting message processor failed:
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='839ed0b8-6b8c-4bd5-bfbe-540349c1f27a' QueueMessageBody='ProjectUID='2136b7a0-03b9-4547-8b2d-c66497accd08'.
ForceFullSync='False'. SynchronizationType='All'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='b0e773af-5cc3-4965-85b3-a4d8050e86f5' QueueMessageBody='ProjectUID='2136b7a0-03b9-4547-8b2d-c66497accd08'.
ForceFullSync='False'. SynchronizationType='All'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'............................................
Queue:
GeneralQueueJobFailed (26000) - ReportingWSSSync.WSSSyncMessageEx. Details: id='26000' name='GeneralQueueJobFailed' uid='07edaa28-647c-4dee-974e-06f47e4b4e40' JobUID='899bd048-2c19-4176-bd6c-1b45b8379a40' ComputerName='NLHGOL7FPR' GroupType='ReportingWSSSync'
MessageType='WSSSyncMessageEx' MessageId='1' Stage=''. For more details, check the ULS logs on machine NLHGOL7FPR for entries with JobUID 899bd048-2c19-4176-bd6c-1b45b8379a40.
As I understand this error could be due to a mismatch between the fields that are 'standard' in the project server and fields that are op the project site.
If the reporting database could not sync, will consequently also the issues not be visible on the PWA??
Any suggestions how to solve this?
Regards,
Dirk

Hello,
Yes, if the Issues & Risks are not being synchronised to the Reporting database then this will impact the issues & risks appearing on the PWA homepage reminders web part. See this post on how the data gets to the Reminders web part in Project
Server 2010:
http://pwmather.wordpress.com/2012/07/13/projectserver-active-issues-and-risks-on-pwa-reminders-web-part-ps2010-sp2010-sharepoint/
The error you are seeing is probably caused by the default Issue or Risks columns being edited or removed from the Issues or Risks lists. It might be worth taking a look at this post:
http://pwmather.wordpress.com/2011/06/20/project-server-2010-project-site-default-fields/
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

An Unknown Error Has Occurred - Project Server 2010 - Tasks Page

Greetings!   Some of my resources are recieving the error "An Unknown Error has occurred" (in red) when trying to access their TASKS Page in Project Server 2010.
I've researched this error quite a bit and am finding suggestions and answers pretty much all over the board.    Before I have my server people start installing a slew of hot fixes - I want to know if anyone has an idea of the underlying cause
for this error.    Since this issue doesn't affect everyone (i.e. I can access my task page), is it possibly related to the actual schedule in which they have assignments?
Any help is appreciated.
Thanks!
~Randy

i have found the solution for this issue, you need to do this:
in the logs you must search the "exception" and the logs give you a ID, this ID is about the task assignment in the specific resource , so this assignment is corrupt.
this ID, you need to merge in the SQL server in the project server database, you need to merge ID task with ID Project with ID Resource, so when you identify the ID project and ID resource you can
DELETE this assignment in the project from project profesional, because this task has a corrupt assignment, you must delete
ONLY FROM project professional.
This solutión solve this specific problem for this assignment that
IS DIFERENT TO THIS SOLUTION post of Brian Smith:
http://blogs.msdn.com/b/brismith/archive/2010/07/02/project-server-2010-an-unknown-error-has-occurred-in-project-center-resource-center-or-tasks.aspx?Redirected=true
Erick Gutiérrez PMI Membership #ID 2089740 MTCS - Microsoft Project Server Managing Projects

Getting the "401 : Unauthorized" exception with bulk edit tool in Project Server 2010

Hi all,
We are using the Bulkedit tool in our Project server 2010 environment.
When users click the button "bulk edit projects" from the ribbon, it is giving the error with a correlation id.
I checked the id in uls logs and find that it is giving the below message.
Does anyone know why we are getting this error ?
Best Regards
Anil Kumar Alladi

Hi Paul,
Thanks for your reply.
The loopbackcheck was already disabled. The users who are accessing the url from the client machines also getting this error.
Best Regards
Anil Kumar Alladi

ORA-06502 - Error when running "Ask The Expert 0.9"

Hi ,
I successfully installed "Ask the Expert" package with Apex 3.0 on Oracle 10g Database 10.2.0.1.0. No error ocurred during the import in my Apex environment.
Besides that, i'm having problems when i tried to run the "Aks the Expert". It always shows the following message errors:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
Error Unable to write activity log.
I think it was a problem with APEX instalation, but i could run the Sample Application of Apex without any problem.
I opened an SR in Metalink, but to my surprise, the analist of support don't know what's wrong with the demo "Ask de Expert".
The debug function of the application show the following commands before the error ocurrs:
0.01:
0.01: S H O W: application="103" page="1" workspace="" request="" session="6648566035252817"
0.01: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: NLS: CSV charset=WE8MSWIN1252
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Setting session time_zone to -03:00
0.02: NLS: Language=en-us
0.02: Application 103, Authentication: CUSTOM2, Page Template: 667896385843019243
0.02: ...Determine if user "N3COUTINHO" workspace "951808960237899" can develop application "103" in workspace "951808960237899"
0.02: ...ok to reuse builder session for user:nobody
0.03: ...Application session: 6648566035252817, user=nobody
0.03: ...Determine if user "N3COUTINHO" workspace "951808960237899" can develop application "103" in workspace "951808960237899"
0.03: Session: Fetch session header information
0.03: ...Metadata: Fetch page attributes for application 103, page 1
0.03: Fetch session state from database
0.03: Branch point: BEFORE_HEADER
0.03: Fetch application meta data
0.04: Computation point: BEFORE_HEADER
0.04: ...Perform computation of item: P1_CLEAN_CRITERIA, type=FUNCTION_BODY
0.04: ...Performing function body computation
0.06: ...Session State: Save "P1_CLEAN_CRITERIA" - saving same value: ""
0.06: Processing point: BEFORE_HEADER
0.06: ...Process "Read and Write Activity Cookie": PLSQL (BEFORE_HEADER) declare l_cookie_id number; begin owa_util.mime_header('text/html', FALSE); -- ate_api.read_activity_cookie; l_cookie_id := ate_api.fetch_activity_cookie_val( 'COOKIE_ID' ); -- if l_cookie_id is null then l_cookie_id :=
Content-type: text/html; charset=ISO-8859-1 Set-Cookie: activity_ask_expert=1|2400346189796; expires=Wed, 01-Jan-2020 08:00:00 GMT; path=/;
0.06: Encountered unhandled exception in process type PLSQL
0.06: Show ERROR page...
0.06: Performing rollback...
Please, could any one help me to solve this problem ? Metalink couldn't help me diagnosing what's wrong.
Thanks,
Sergio Coutinho

Hi,
I don´t know if it help the analisis, but i collect some informations about my environment:
1) HTML DB version
3.0.1
2) Database version
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
3) Database server operating system (as well, if 32-bit or 64-bit)
Solaris 5.9 - 64 bits
4) Database Parameters:
PARAMETER VALUE
NLS_CALENDAR GREGORIAN
NLS_CHARACTERSET WE8ISO8859P1
NLS_COMP BINARY
NLS_CURRENCY $
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_DUAL_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_LANGUAGE AMERICAN
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_NCHAR_CONV_EXCP FALSE
NLS_NUMERIC_CHARACTERS .,
NLS_RDBMS_VERSION 10.2.0.1.0
NLS_SORT BINARY
NLS_TERRITORY AMERICA
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
Could it explain why ASK THE EXPERT is running on hosted apex site and it´s
generating error when running in my environment?
Thanks for the help !
Sergio

Error occurs when I open the tasks list in MS Project Professional 2013 from SharePoint 2013

Hi,
I have created a SharePoint 2010 workflow for a tasks list that updates a list item column if the Date Complete <= Today's date & Percentage Complete = 100%
I used 'Set Field in Current Item' in the workflow & the values are updated in the list for the current item.
However, when I open the tasks list in MS Project Professional 2013 from SharePoint 2013, then I get a error "We can't write task - taskname to the SharePoint site. This is either because tasks list is in read only mode or because this task has a column
that requires unique value."
If I remove the 'Set Field in Current Item' in the workflow, then the error does not occur. However, the 'Set Field in Current Item' in the workflow is required.
Please provide solution to this issue ASAP. Your reply will be greatly appreciated.
Thanks in advance

Hi Jack,
A shot in the dark here. I'm not convinced the error is from the workflow. What is the definition of the list item column in SharePoint? Have you set the column to requiring a unique vale? Look at the column definition.

When the system status says icloud is OK but it reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles.

I am getting a 404 error when I click the link to request my upgrade.

I am getting a 404 error when I click the link to request my Mountain Lion upgrade. I have a brand new MacBook Pro so I don't understand why I'm getting this error.

Make sure you are logged in to the Adobe site, have cookies enabled, clear your cookie cache. If it continues to fail try using a different browser.

Project Server 2010: PWA Removing Default Project Site Security Groups When Creating a New Project

I looked for this specific issue with Project Server 2010/PWA/SharePoint and could not find an exact answer... hopefully someone can help.
We are currently using Project Server 2010 and have a number of project site templates that are used dependent upon the enterprise project type selected. Each of these project site templates have unique permissions which should create the default security
groups on the project site upon publishing/syncing:
<Project Name> Members
<Project Name> Owners
<Project Name> Visitors
<Project Name> Project Managers (Project Web App Synchronized)
<Project Name> Team Members (Project Web App Synchronized)
Web Administrators (Project Web App Synchronized)
Whether a user creates a project through PWA or Project Pro 2010 and imports the project into PWA, we get a weird result in the Site Permissions of the newly created project site. PWA will remove all default security groups from the project site template
and add a whole list of users in the Site Permissions list without groups.
Once the project is published and the project site is created, we can then go back and add those default security groups back in the project Site Permissions and even add a couple of custom groups without them being removed on all subsequent project syncs
or publishing.
How do we get PWA to not overwrite the project site templates' security groups and place each user in the proper default security groups? At the same time, how is PWA adding a number of users into the Project Site Permissions?
Thanks in advance.

Paul,
Thanks for that information. Right now we are using the Test environment to turn the Auto-sync feature back on. I suspect that the reason this is happening is due to PWA groups/categories/security templates. There may be more than one PWA group that is "overwriting"
the default project site groups upon initial creation of the project. We will look further into the security settings to tighten up the policies.

Error when navigating to the PWA root site for Project Server 2010

Similar Messages

Maybe you are looking for