Error when releasing billing to Accounting

Hi All,
I get the following error when releasing the billing to accounting in T-code VFX3....
Tax code in procedure TAXSL is invalid
Message no. FICORE704
Diagnosis
The tax code entered is not defined in the country for this company code.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system settings.
To do this, choose Maintain entries (F5).
1. Check whether the required tax determination procedure is assigned to the relevant country. the Procedure field is in the detail screen.
2. Create a new tax code if required
Pls note that in the error message it does not mention a particular tax code which is invalid, it jus shows tax code in procedure TAXSL is invalid.
I have done the following customization both in FI and SD.
I have maintained condition record MWST both in FI and SD. Maintained all necessary tax codes in FTXP.
Note that in the billing, we enter the condition type MWST in the Header Level and enter the relevant percentage manually. According to my understanding since the condition is maintained at header level there is no need of maintaining condition records through T-Code VK11.Therefore the tax code is not picked from the condition record as its not maintained in the item level.
Pls advice me on how to overcome this error ASAP since its critical.
Thanks in Advance,
Maleeq

Hi,
Yes I have maintained tax codes in FTXP. but the error message shows that "tax code __ is missing in tax procedure TAXSL". To my knowledge it is not possible to create a tax code "blank"!!!!
I have not maintained condition records in VK11 as we maintain the MWST condition in the Header level. Condition records are picked only from ITEM level and NOT from HEADER level.
Maleeq

Similar Messages

Error when releasing billing to accounting document

Why we tried to release the billing to accounting document. There is the below error.
Could someone please kindly help?
Message Identification: F5
System Message Number: 358
Output type: E
The Diagnosis is 'This document refers to a document which contains an invoice reference.
The Procedure is 'Enter a different document as the invoice reference'.
Thanks,

You might be creating the billing document for a flow where there might be original invoice and/or credit memo also.
So check that the original invoice and/or credit memo has an invoice reference to itself (i.e. the invoice reference = the accounting document number) than there is an incorrect referencing.
Remove this reference via FB02 in the original invoice and/or credit memo and it should work
Regards,
Gaurav

Error- while releasing billing to accounting

Hi Friends,
Trust you are all fine.
As mentioned above on subject ....I am getting an error on biling doc while trying to release it to accounting. Problem is I am unabel to see any LOG notes as system is not generating any log error.
I was going through few related answers in forum .........buit couldnt find any on this particular issue. So, In this situation how should I and where should I look to find out error to resolve.
Many thanks in advance and kindly let me know accordingly.
Regards,

Hi
1.Go to VF02 and enter the billing document no after that go to environment -Acct det analysis->revenue accounts
by doing above u will able to find the error analysis in revenue account determination
2.Check the account assignment group in the billing document header header tab and item-item detail
3.Go to VF02 and enter the billing document no and click on release flag then system will show you the error if any or it will realeased to accounts
Regards
Damu

Error in releasing billing to accounting

Dear Friends,
I am facing an error while releasing the billing document to accounting.....error is "only output tax is allowed for acount 175000 9999, 01 is not allowed"......what wud b the reason?.....thanks in advance....

Hi
Go to FS00 and give you company code and G/L account 175000 and check in the control tab wheather the Tax tab is properly maintained or not
Secondly , check for tax condition record you maintained ( say MWST) in VK12 and in VK12 check what tax code you have assigned , If you have assigned tax code 01 then check wheather it is a input tax or output tax .If it is a input tax then change it to output tax by assigning a output tax code
Finally also check in SPRO->Financial accounting->Basic settings->Procedures wheather the tax code is properly maintained or not .I think 01 is a taxcode which is input tax code just check in the
Regards
Srinath

Currency Type error when releasing billing docs to Accounting

When I am trying to release the billing documents to accounting following error is displayed :
company code ABC has currency type 31. the currency type has the currency key INR in the Fin. Accounting application. The same currency type is conveyed to fin. accounting accross the accounting interface with currency key CAD.
System is also showing the tip :
This is a system error in the calling application. Currency type 31 in company code ABC must have currency key 'CAD' when the data is transmitted.
Please let me know if I have to do anything in Tcodes SCC4 or OB22. Detailed answer will be of help.
Regards
RK

Hi Ravi,
From the discription of the error what you have given what i umderstood is that in FI documents are posted with Currency INR, while the Cur. type 31 is transferring Cur. Key CAD to FI.
Since there is a diff in the Cur the error is coming.
Try to maintain Add. local cur in OB22 and then check.
regards
JS

Error when creating billing / accounting document with VF01

Hi All,
When I use VF01 to create an invoice with reference to a LF D/N, I got the following error after saving.
"An exchange rate type is not defined for country CN
Message no. FF 802". And billing document is created but with no accounting document.
I checked the exchange rate type is defined. but I can not find the place where I can assign to the specific country.
Best Regards
Jean

Thanks for your help.
Hi Dave,
I checked in S_BCE_68000174, it has been already assigned.
Hi Ferry,
In FTXP, the tax code has been maintained.
And you are right, when I maintain the field KURST in table T005, it is ok. But I am confused in 4.6C, the field KURST can be maintained by T-code OY01, but in 470, exchange rate type cannot be found in OY01. Where can I set in 470? And why in 470, even field KURST is empty in table T005, but there is no such error when creating billing document?
Many Thanks
Jean

When releasing Billing, system prompted no accouting document created

Dear SAP Guru and Experts.
Currently user is hitting the error when the Billing is released. The system prompted "no accounting document created". It is understood from the log VFX3 where the G/L code is not maintained in the company code.
My question is that what is the configuration need to be concern when the accounting document created it trigger the input tax G/L code. Is there any configuration need to be done in order to tackle the input tax issue other than keep on creating the new g/l code in the company code.
Thank you
Regards
Leonard Tan

Hello,
You can try to release the document using VF02 (click the Green flag), the system will give the exact message.
Check you pricing procedure, whether the account key is maintined for tax condition type or not.
Check the account determination settings in VKOA, make sure the G/L accounts are maintined for the conditions.
Check the customer master and make sure the Reconcilation account is maintined or not.
Regards,
SAM

Error while releasing Billing: Assign HD00 (Frieght) Condition type in COPA

Hi,
I am getting the below error while releasing billing document.
Assign condition HD00 type in COPA
HD00 condition type is frieght condition type
Is it good thing if we assign this condition type to COPA value field in KE4I? or we should not assign Frieght condition to COPA?
Please advise
Thanks
Kishore

HI Kishore,
To which GL account are you posting this freight condition value? Is that GL created as a revenue element (of category '11'/'12')?
If yes (has to be 'yes', since you are getting the error message), then you don't have a choice but assigning a CO-PA value field in KE4I. The idea here is, if you have created the GL as revenue element, then you intend to take it to Controlling module for further analysis. Thus, making your FI/CO reconciliation easy.
If you do want to carry this value to CO-PA for analytical reporting then don't create that particular GL (assuming you are posting freight to a separate GL) as a revenue element. That said, it does make sense to carry this value to CO-PA and in your present case, you don't have a choice as the message which you got is an error message, which you can't circumvent.
Hope this helps.

Error when releasing a transport

Hello experts,
I am getting an error when releasing a transport. The error message is telling me that
Object DTPA DTP_009C8T81IIB6H4UFC7FQUVRFL was set to 'inactive'
The detailed error message isnt very helpful. The performance assistant gives the error message RSO 407.
I found another thread, scn.sap.com/thread/3428031
The answer in this thread appears to be very close to a solution for me, I just need a little more information I think. As it says, I have looked in the table RSTRAN for the transformation that this DTP processes. There are three rows, with a different OBJVERS. A and M are both set to ACT, but OBJVERS = D is set to OBJSTAT = INA.
I suspect that this is the problem with the releasing of my transport. Do you agree?
If so, how do I go about getting this activated?
Many thanks.

Hi Simon,
The D version will be always inactive as it indicate SAP Delivered version of the transformation.
I will suggest just have a look at any existing transformation, you will find same status i.e D version INA also check last change it will be SAP also under content column you will find info for D version.
I still say, just go ahead and release your transport by ignoring the message, it should work. You are all set to move your transport.
Rest upto you.
I have tried releasing transport by ignoring messages many times.....and worked all time
Thank-You.
Regards,
VB

Cost Center Error while releasing Billing document to Accounting

Hi SAP Gurus,
Our user raised an issue that when he had released billing document to accounting, the system threw error message
"Cost center xxxx (CO area)/xxxx(Cost center) does not exist on date 11/16/2011". Message No. KI 222.
But the cost center xxxx does not exist in the system at all. The user does not want to create the cost center eirther. Cost center was not entered in Sales order, Delivery and Billing. I have checked 'Default account assignement' (OKB9) settings, Default account assignment in cost element master record and assignment of cost center to sales organization (OVF3). But cost center xxxx was not configured in the above settings. I have checked validations/substitutions, user exits and BAPIs, there is nothing specific to the cost center. This is not a cross-company code scenario. I have made field status to optional for cost center. But still the problem persists. Accounting document did not get generated because of the above mentioned error message. User applied SAP notes 315350. But it did not resolve the issue.
Would anyone let me know 'why the system showed the cost center xxxx that does not exist, while releasing the billing document to accounting'?
Thanks in advance.
Best Regards,
K.S.K

Hi Friend,
I think this link help for you
Cost center XXXX does not exist on 15.09.2010.
or check the OVF3

Issue when releasing Billing Document to Accounting

Hello,
When releasing a Billing document to Accounting we are getting an error that Business Area cannot be determined for a G/L Account - 200000.
The Billing document has two materials and they belong to different Business Areas.
If we create our Billing with one materials and one Business area - we are getting no error - but we are getting error when there are multiple business areas in the Billing document.
Any help will be very much appreciated.

Hi Ankur,
If they belong to different divisions within a plant ? ( i hope business area is assigned to plant + division combination in OMJ7 )
you would need to maintain division wise setting in VKOA for the same GL account
Hope it helps
Regards
Sach!n
Edited by: Sachin Bhutani on Sep 26, 2009 2:29 AM

VF02 error in Release Billing document to Accounting document

Hello SAP Folks,
A sales order (VA01) and corresponding billing document has been posted (in VF01). When I try to release the billing document to Accounting, an error "Incorrect document no. XXXXXXXX. Select the document number between yyyyyyyyy and zzzzzzzzzzzzzz " shows up. When I tried to find error through VFX3, it says, Release incomplete due to "FI/CO interface" Can anyone suggest the missing configuration.
PS: I checked the doc. type RV (Billing doc. transfer) and Billing type F2. They are in different number ranges. and RV is marked external. The number range settings are similar as that of another Company code (where we are able to release billing document to accounting document).
Thanks in advance,
Narayanan

Hi,
Thanks for your suggestions. The issue is resolved by changing the number range for RV document type (though it is still external). I guess this is made external since the Billing document number is passed to FI document number when it is released to Accounting documet.
After the release, both Invoice and Accounting document have the same no.

Error while releasing Billing doc to Accounting

Hi all
I am gettin the following error while releasing a Billing doc to FI-
Reconciliation account 240001 or short key 00 is not permitted
The Billing doc pertains to Export sales and the billing Doc type is Export Invoice. However the Customer Recon A/c is defined as 240000 which is for Domestic Sales. A/c 240001 stands for Export Sales. I am wondering why it is asking for the Export Sales Recon a/c. Does this has something to do with Alternative Recon A/c? Should I set an Alternative Recon A/c and check this? If yes, then should it be defined in SD or FI?
If any1 has come across this prob, plzz help me.
Regards

It is all Fi related, and should be defined by the Fi Consultant.
But by changing the sort key I think your error can be solved. But I don't exactly know your config settings to recommend any solution.
Regards
AK
Please reward if helpful

Error when release account plan via CRM_ACC_PL

Hi expert,
Getting error 'Overlapping validity periods for two condition records' when release account plan via CRM_ACC_PL.
Any idea what caused this error?
Cheers.

Hello,
could you please check notes 1311405, 1067232, 1044090, 1041830.
Hopefully they can help.
Regards,
Gerhard

Error while releasing billing documents to accounting

i am facing the following problem while releasing billing documents to accounting i.e, taxcode in procedure TAXD is invalid... pls solve it...

Hi,
That means the tax code which you are using is not linked to your tax procedure.
For this Goto T.Code :FTXP
Give Country for which this tax procedure is used.
Next you have to give the Tax Code which you are using, if it is not created in that then it will create that tax code for that country, in that screen you will see all the tax condition types, give your tax percentage to the condition type which you want to use (Say MWST)
Now release the billing document for accounting.
You want face the issue.
Hope this is clear.
Reward if helpful.
Thanks
Praveen

Error when releasing billing to Accounting

Similar Messages

Maybe you are looking for