Error when runing DME program

Hi
When I am running DME program after payroll run getting error "Payment method A is not defined for foreign business partners".
I checked BT table it showing correct data. RT is also showing correct data. Checked IT9, Payment method A is assigned to the employee.
What can be the issue? It is very urgent. I will appreciate your input.
Regards,
GRM

Hi,
In my case error was coming because user had assigned wrong country to the employee in his present address(IT0006). After changing the country it worked fine.
I don't know what error you are getting. But the best option is run audit program (RPUAUD00) and check what are the Infotypes maintained/changed for the employee in the current month for which you are running DME. You will easily find out the solution.
Regards,
GRM

Similar Messages

Error when Generating the Program

Recently there was an SP upgrade and my Planning Book started giving me this error message (SCM version =5.0 and SP = 7)
"Error when generating the program" Message no. /SAPAPO/TSM141
Diagnosis: Generated programs are programs that are generated based on individual data objects, such as planning object structure, planning areas and Infocubes. These programs are then executed in the transaction. An error occured during the generation of such a program
Possible causes:
1. The template has been corrupted
2. The object that the template uses to generate the program contains inconsistencies; for instance an Infocube has not been activated
This error occurs when I try to open the my planning book/creating the selection profile. I've re-activated the Infocube and later deactivate and active my POS and tried to do the same for the Planning Area....but the error still persists. I tried to create a new planning area and tried it again but the error still persists. I've tried to fix any inconsistencies in the planning area time series objects by running the consistency check....however the same error pops up during the consistency check....
Anyone encountered this error message and any possible solutions to this issue.
Thanks
Surender

I did find an ABAP Dump when looking at ST22. The short message is as follows:
Runtime Errors         GEN_BRANCHOFFSET_LIMIT_REACHED
Date and Time          05/14/2007 19:33:54
Short text
     Jump distance is too large and cannot be generated.
What happened?
     A jump distance is too large and cannot be generated.
     A control structure or a routine with "CHECK" or "EXIT" contains
     too many ABAP statements.
     Error in the ABAP Application Program
     The current ABAP program "GP_MET_PSTRU_BASIC_FORMS" had to be terminate
      because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     During the generation of program "GP_MET_PSTRU_BASIC_FORMS", the system
      determined that
     within an ABAP event a control structure (for example, IF..ENDIF
     or LOOP..ENDLOOP) or a routine (for example, FORM routine) has
     become too large. The resulting jump distance is too large so that
    it could no longer be generated.
    With the internal load format, the jump distance must not be
    greater than 32768 (this is the size of approximately 10.000
    ABAP statements).
    The jump distance that is to be generated, however, is 50885.
How to correct the error
   The ABAP application program must be changed.

Mass processing - Error when processing Java programs / VMC out of memory

When running a mass update background process that updates the status of a service order in CRM the job fails due to error 'Error when processing Java programs'. I checked the VMC (SM52) and noticed that there is an error about the VMC running out of memory.
The background program can either be a PPF Action or a Z-ABAP program that performs the update. Both programs are performing a CRM_ORDER_INITIALIZE but it seems that the VMC is not releasing the memory fast enough.
Is there anyway we can force the VMC to release the memory after processing of each individual order?
Thanks!

I got similar issue and it got resolved by useing CRM_ORDER_INITILAIZE. Initalization should happen after every Order processing and see that only one header guid is passed to the the FM. May not be good option ,but just try by putting wait for 5secs after CRM_ORDER_INITILAIZE.

Error when generating update program

Hi,
I was loading transactional data in to Cube. The load had failed and in RSMO status tab is showing that Error when generating update program. could you please suggest me some one how to resolve it.
regards,
Neeraja
null

Hi,
Actually when you are loading data, the update program is executed. It is generated while you create the update rules for your data target. Please check whether the update rules are active or just go to the update rules and activate it again. Try loading data after activation and let us know the results.
With Regards

Error when exporting ABAP Programs and the Project

Hi All,
I keep on getting the following errors when I'm exporting the entire Project or only ABAP Programs (see attached screenshots).
- Screenshot 1 shows an error when exporting a Project.
- Screenshot 2 shows an error when exporting ABAP Program(s).
These errors occur in the DEV environment.
Please help.
Thank you all.
Kind regards,
Roli

Hi Ramakrishna,
I will send the log file for when exporting a project. However, the issue of exporting ABAP Programs is nor resolved.
In CMC we had to configure the system to Generate ABAP = True.
Thank you.
Kind regards,
Roli

Error when running a program /RPM/FIN_PLAN_INT

when executing the program "/RPM/FIN_PLAN_INT", I'm getting an error stating as "Category ID does not exist for item.Instantiate categories first"
This error is hitting for only 4 Items in list of all 173 Item. Hence the Financial cost are not getting update for all the items when executing the program. The DB update failed.
I checked the financial Category IDs and its maintained properly and working fine with other Items. Why this is happening for only the 4 items? Am I missing something in config?
Please experts provide me some valuable suggesions.

Hi;
When you define and edit the mapping between the project management role function ID and the financial planning view, category, or group. You can also decide on whether the cost or revenue rate is to be considered for the financial information calculation.
1. Execute report /RPM/PLAN_INT_PREP to create financial and capacity categories and groups for the bucket or the portfolio items based on the parameters mentioned in the selection screen.
2. Execute report /RPM/FIN_PLAN_INT to perform the financial planning for a portfolio item for the different portfolio items based on the parameters mentioned in the selection screen.
Prerequisite: For the portfolio item, you must have executed report /RPM/PLAN_INT_PREP before.
3. Execute report /RPM/BUCKET_ROLLUP to roll up the financial data for the different categories and groups of the portfolio items to its higher-level buckets.
Hope this help you.
Best Regards.
Mariano

Error when runing entreprise manager on a browser

hi all. I ran into some pbs when running OEM. Installed it on solaris 9. the service starts fine (emctl) and when runing it on the browser, after entering the username and password, ai have this error! Its oracle 10.1.0.4
http://10.252.33.50:5500/em/console/license
500 Internal Server Error
java.lang.NullPointerException at oracle.sysman.emSDK.license.LicenseManager.hasAllPacks(LicenseManager.java:467) at oracle.sysman.emSDK.license.LicenseUtil.isLicensed(LicenseUtil.java:138) at oracle.sysman.eml.app.Console.doGet(Console.java:246) at javax.servlet.http.HttpServlet.service(HttpServlet.java:740) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:101) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16) at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:133) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:269) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192) at java.lang.Thread.run(Thread.java:534)
any one to help? also beeing having pbs starting the agent.
bash-2.05$ agtctl start
AGTCTL: Release 10.1.0.4.0 - Production on Thu Jul 20 13:30:43 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
ORA-28590: agent control utility: illegal or badly formed command
bash-2.05$ agtctl
AGTCTL: Release 10.1.0.4.0 - Production on Thu Jul 20 13:31:48 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
AGTCTL> startup
ORA-28592: agent control utility: agent SID not set
AGTCTL>
thanks.
DID

I can access the enterpise manager tools after
executing that scripts. thanks men.
Wat I would like to know is how to install the
repository (using emca ???)! How to connect to the
repository and gather statistics like capacity
planning etc for this database and other databases.
also would to know ai can discover new nodes (dbs) so
that ai can adminster them form on console.
Thanks and waitng to hear from you guys.
DIDIf you need to manage more than one database, you will need to look at Grid Control. I sense that you want the 10g version of the 9i Oracle Enterprise Manager and that is Grid Control. Database Control only allows you to manage one database and it creates its own repository. The emca command is used to repair this repository...do emca -help i believe to get more help.
But look at the Grid Control installation..when you install it, it will create a repository similar to 9i etc...You will have tools like AWR for statistics gathering, you can add nodes to it by installing management agents on the different nodes.

Syntax Error when generate print program in HRFORMS

Dear All,
I created form for payslip using HRFORMS, the name form is ZPS_TPI_01. When I activate the form, the error raised: Generated print program contains a syntax error
Diagnosis
Generated print program /PYXXFO/ZPS_TPI_01_PRNT conains a syntax error in line 9 of include /PYXXFO?ZPS_TPI_01_PAYR.
I have already apply note 878168 but it is not work.
Please advise me.
Thank you,

hi,
can you let me know for which country are you trying to generate the HR form for payslip?
There are certain countries for which payslip isnt supported.
For such countries you get a similar error.
Thank you,
Jose

Error When Compiling MailTest Program ?

HI. Guys. I am getting this error when i try to compile a program which send an email.
Compiling 1 source file to F:\Projects\JavaMail\war\WEB-INF\classes
[javac] F:\Projects\POC\JavaMail\src\SendMailBean.java:3: package javax.mail does not exist
[javac] import javax.mail.*; //JavaMail packages
[javac] ^
[javac] F:\Projects\JavaMail\src\SendMailBean.java:4: package javax.mail.internet does not exist
[javac] import javax.mail.internet.*; //JavaMail Internet packages
[javac] ^
[javac] F:\Projects\JavaMail\src\SendMailBean.java:24: cannot find symbol
[javac] symbol : class Session
[javac] location: class SendMailBean
[javac] Session l_session = Session.getDefaultInstance(l_props, null);
[javac] ^
[javac] F:\Projects\JavaMail\src\SendMailBean.java:24: cannot find symbol
[javac] symbol : variable Session
[javac] location: class SendMailBean
[javac] Session l_session = Session.getDefaultInstance(l_props, null);
[javac] ^
[javac] F:\Projects\JavaMail\src\SendMailBean.java:29: cannot find symbol
[javac] symbol : class MimeMessage
[javac] location: class SendMailBean
[javac] MimeMessage l_msg = new MimeMessage(l_session); // Create a New message
[javac] ^
[javac] F:\Projects\JavaMail\src\SendMailBean.java:29: cannot find symbol
[javac] symbol : class MimeMessage
[javac] location: class SendMailBean
[javac] MimeMessage l_msg = new MimeMessage(l_session); // Create a New message
[javac] ^
[javac] F:\Projects\JavaMail\src\SendMailBean.java:31: cannot find symbol
[javac] symbol : class InternetAddress
[javac] location: class SendMailBean
[javac] l_msg.setFrom(new InternetAddress(p_from)); // Set the From address
[javac] ^
[javac] F:\Projects\JavaMail\src\SendMailBean.java:34: package Message does not exist
[javac] l_msg.setRecipients(Message.RecipientType.TO,
[javac] ^
[javac] F:\Projects\JavaMail\src\SendMailBean.java:35: cannot find symbol
[javac] symbol : variable InternetAddress
[javac] location: class SendMailBean
[javac] InternetAddress.parse(p_to, false));
[javac] ^
[javac] F:\Projects\JavaMail\src\SendMailBean.java:38: package Message does not exist
[javac] l_msg.setRecipients(Message.RecipientType.CC,
[javac] ^
[javac] F:\Projects\JavaMail\src\SendMailBean.java:39: cannot find symbol
[javac] symbol : variable InternetAddress
[javac] location: class SendMailBean
[javac] InternetAddress.parse(p_cc, false));
[javac] ^
[javac] F:\Projects\JavaMail\src\SendMailBean.java:43: package Message does not exist
[javac] l_msg.setRecipients(Message.RecipientType.BCC,
[javac] ^
[javac] F:\Projects\JavaMail\src\SendMailBean.java:44: cannot find symbol
[javac] symbol : variable InternetAddress
[javac] location: class SendMailBean
[javac] InternetAddress.parse(p_bcc, false));
[javac] ^
[javac] F:\Projects\JavaMail\src\SendMailBean.java:49: cannot find symbol
[javac] symbol : class MimeBodyPart
[javac] location: class SendMailBean
[javac] MimeBodyPart l_mbp = new MimeBodyPart();
[javac] ^
[javac] F:\Projects\JavaMail\src\SendMailBean.java:49: cannot find symbol
[javac] symbol : class MimeBodyPart
[javac] location: class SendMailBean
[javac] MimeBodyPart l_mbp = new MimeBodyPart();
[javac] ^
[javac] F:\Projects\JavaMail\src\SendMailBean.java:53: cannot find symbol
[javac] symbol : class Multipart
[javac] location: class SendMailBean
[javac] Multipart l_mp = new MimeMultipart();
[javac] ^
[javac] F:\Projects\JavaMail\src\SendMailBean.java:53: cannot find symbol
[javac] symbol : class MimeMultipart
[javac] location: class SendMailBean
[javac] Multipart l_mp = new MimeMultipart();
[javac] ^
[javac] F:\Projects\JavaMail\src\SendMailBean.java:64: cannot find symbol
[javac] symbol : variable Transport
[javac] location: class SendMailBean
[javac] Transport.send(l_msg);
[javac] ^
[javac] F:\Projects\JavaMail\src\SendMailBean.java:79: cannot find symbol
[javac] symbol : class MessagingException
[javac] location: class SendMailBean
[javac] } catch (MessagingException mex) { // Trap the MessagingException Error
[javac] ^
[javac] 19 errors

Looks like you're using ant. You need to configure your ant build.xml file
so that mail.jar (and activation.jar unless you're using JDK 6) is in your
classpath when you compile (and run, of course).

Error when MAKE any programs :(

I always get this error when install anykind of programs, even I have tried to use HomeBrew and no error to be noticed in $brew doctor
Can anyone help me to solve this!!!!!!!!!!

Have you tried reading the linked page? The one next to the big red READ THIS message?
Here it is again in case you missed it somehow…
https://github.com/mxcl/homebrew/wiki/Troubleshooting
Have you installed the latest Xcode?

Assigned MP errors when I deploy program

<select class="ratingSelect" disabled="disabled" id="starRating243703" style="display:none;"><option value="-2"></option><option value="-1"></option><option value="0"></option><option
value="1"></option><option value="2"></option></select>
0
i have 1 primary site and 4(site system server) and our company have more than 15000 users and more than 1000 branch
Boundaries are set to IP Address range for all branch
- Discovery is performed and successful
- Sites are assigned
when i deploy program it's get error in locationservices.log
([style="color: #993300;"] 2 assigned MP errors in the last 10 minutes[/style], threshold is 5. LocationServices 12/9/2014 11:13:00 AM 8836 (0x2284)Attempting to retrieve local MPs from the assigned MP LocationServices 12/9/2014
11:13:00 AM 8776 (0x2248)Unable to retrieve AD site membership LocationServices 12/9/2014 11:13:00 AM 8776 (0x2248)Refreshing the Management Point List for site PRI LocationServices 12/9/2014 11:13:00 AM 8776 (0x2248)Retrieved management point encryption info
from AD. LocationServices 12/9/2014 11:13:01 AM 8776 (0x2248)Raising event:instance of CCM_CcmHttp_Status{ ClientID = "GUID:56FBA3BF-91CF-4195-9914-4C1ED87608BE"; DateTime = "20141209081301.044000+000"; HostName = "SCCM.moj.gov.local";
HRESULT = "0x00000000"; ProcessID = 2780; StatusCode = 0; ThreadID = 8776;}; LocationServices 12/9/2014 11:13:01 AM 8776 (0x2248)Refreshing trusted key information LocationServices 12/9/2014 11:13:01 AM 8776 (0x2248)Raising event:instance of CCM_CcmHttp_Status{
ClientID = "GUID:56FBA3BF-91CF-4195-9914-4C1ED87608BE"; DateTime = "20141209081301.067000+000"; HostName = "SCCM.moj.gov.local"; HRESULT = "0x00000000"; ProcessID = 2780; StatusCode = 0; ThreadID = 8776;}; LocationServices
12/9/2014 11:13:01 AM 8776 (0x2248)Persisting the management point authentication information in WMI LocationServices 12/9/2014 11:13:01 AM 8776 (0x2248)Persisted Management Point Authentication Information locally LocationServices 12/9/2014 11:13:01 AM 8776
(0x2248)Unable to retrieve AD site membership LocationServices 12/9/2014 11:13:01 AM 8776 (0x2248)MPLIST requests are throttled for 00:04:38 LocationServices 12/9/2014 11:13:01 AM 8836 (0x2284)Unable to retrieve AD site membership LocationServices 12/9/2014
11:13:01 AM 8776 (0x2248)Updated FSP 'SCCM.moj.gov.local' from AD to local. LocationServices 12/9/2014 11:13:01 AM 8776 (0x2248)Updating portal information. LocationServices 12/9/2014 11:13:01 AM 8588 (0x218C)[style="color: #993300;"]3 assigned
MP errors in the last 10 minutes, threshold is 5[/style]. LocationServices 12/9/2014 11:13:15 AM 8836 (0x2284)4 assigned MP errors in the last 10 minutes, threshold is 5. LocationServices 12/9/2014 11:13:35 AM 8836 (0x2284)

program
execmgr.log
<![LOG[A user has logged on.]LOG]!><time="10:53:31.978-180" date="12-09-2014" component="execmgr" context="" type="1" thread="828" file="execreqmgr.cpp:4912">
<![LOG[The logged on user is MOJ\aalhasan]LOG]!><time="10:53:31.979-180" date="12-09-2014" component="execmgr" context="" type="1" thread="828" file="execreqmgr.cpp:4931">
<![LOG[A user has logged on.]LOG]!><time="11:13:00.366-180" date="12-09-2014" component="execmgr" context="" type="1" thread="8380" file="execreqmgr.cpp:4912">
<![LOG[The logged on user is MOJ\aalhasan]LOG]!><time="11:13:00.518-180" date="12-09-2014" component="execmgr" context="" type="1" thread="8380" file="execreqmgr.cpp:4931">
<![LOG[CServiceWindowEventHandler::Execute - Received SERVICEWINDOWEVENT : START Event]LOG]!><time="22:00:00.171-180" date="12-09-2014" component="execmgr" context="" type="1" thread="9792"
file="cservicewindowhandler.cpp:37">
<![LOG[CExecutionRequestManager::OnServiceWindowEvent for START]LOG]!><time="22:00:00.203-180" date="12-09-2014" component="execmgr" context="" type="1" thread="9792" file="execreqmgr.cpp:8748">
<![LOG[Auto Install is set to false. Do Nothing.]LOG]!><time="22:00:00.297-180" date="12-09-2014" component="execmgr" context="" type="1" thread="9792" file="execreqmgr.cpp:8760">
<![LOG[CServiceWindowEventHandler::Execute - Received SERVICEWINDOWEVENT : END Event]LOG]!><time="05:00:00.104-180" date="12-10-2014" component="execmgr" context="" type="1" thread="10496"
file="cservicewindowhandler.cpp:37">

Error when starting remoteapp program - "the following is not in your list of authorised programms:"

have 2 rd web servers set up using an nlb cluster
3 rd sesison host servers - dns round robin
session broker (installed on dc)
web single sign on is in place using cert generated internally on standalone ca
I have added several programs to list on all session host servers and allows "domain users" access to them.
regardless of the account that logs on I get the error "the following remoteapp program is not in the list of authorized programs: WordPad
I have tried various things but I am sure the setup is correct.. any ideas?

Hello,
Based on my experience on similar issues, this error may be caused by missing Host Records of the TS servers on the local DNS.
To fix this issue, please add the Host Records of the Terminal Servers into the local DNS and test it again.
Let us know the result if possible. Thanks.
Best Regards,
Lionel Chen

It has an error when run a program in background job

Dear Expert,
we have a program
when run it in background,it has a error "Error during import of clipboard contents" but when run it normally(run in front workbench se38 or run the t-code),everything is ok.i've used typingJDBG in the command box to debuge the background job,there has no error.
whould you like to tell me what had happen? thanks a lot!
addition: the program used a function ALSM_EXCEL_TO_INTERNAL_TABLE
Thanks & Regards,
Kerry
Edited by: Kerry Wang on Aug 24, 2009 2:12 PM
Edited by: Kerry Wang on Aug 24, 2009 2:14 PM
Edited by: Kerry Wang on Aug 24, 2009 2:14 PM

Hi,
You cannot use FMs to get data directly from the presentation server when program is executed in the backgroud.
Check the thread : GUI_DOWNLOAD
Regards,
Himanshu

Error while runing bdc program

hi,
i written one bdc program there are no syntax errors and in flat file also no error records but when uploading data it showing pop up that do you want to save data with 2 push buttons yes or no. i suppose to be it is front end problem how to avoid that.
p.surendar reddy

Hi,
You have miss a step while recording.. What i mean is you have created
bdc for changing some document. you recorded the fields to be changed
but didn't save before terminating recording.
re-create your recording... and before and click save icon as the last step#
in your recording..
Hope this solves your problem..
Enjoy SAP,
Pankaj Singh.

Compilation errors when using Client program

Hi all,
I face a problem when compiling the client.
Compilation errors:
"Not able to resolve symbols HelloHome, Hello"
At this line: HelloHome home = (HelloHome)ctx.lookup("HelloHome")
I have cut and paste the client program below:
Please look into it.
Thanks
Ranjan
//Client for HelloBean
import java.rmi.*;
import javax.naming.*;
import java.util.*;
public class HelloClient {
public static void main(String args[]) {
try
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
ht.put(Context.PROVIDER_URL,"t3://localhost:7001");
InitialContext ctx = null;
ctx = new InitialContext(ht);
HelloHome home = (HelloHome)ctx.lookup("HelloHome");
Hello hel = home.create();
String retval = hel.sayHello("Ranjan");
System.out.println("Returned: " + retval);
hel.remove();
catch (RemoteException e)
System.out.println("RemoteException occured: " + e);
catch (javax.ejb.CreateException e)
System.out.println("Create Exception occured: " + e);
catch (javax.ejb.RemoveException e)
System.out.println("Remove Exception occured: " + e);
catch(javax.naming.NamingException e)
System.out.println("Naming Exception occured: " + e);
**************************

Hi,
Yes the Hello and HelloHome classes are present in the same directory as the HelloClient.class
Regards
Ranjan

Error when runing DME program

Similar Messages

Maybe you are looking for