Error when running a report in Crystal Reports Server 2008

Received the following error message:
Error in File Relatorio4: Failed to load database information.
Or
Error
Failed to open the connection. Relatorio4 Details: [Database Vendor Code:
12154 ]
I'm trying to run a report Crystal Reports 2008 in Crystal Reports Server 2008.
I use the native driver for Oracle (Oracle Server).
Any help would be appreciated!

Hi Vilari,
Do a small test to test your connection.
-Right Click on desktop ->
Create new text document->
Save as test.UDL->
double click and test connection by selecting driver name,datasource name,user id and password.
Click on Test Connection.
It should be succeed.
Database Vendor Code is the error returned by the database client/server.Its not a Crystal Report Error.Check Microsoft's web site for more info on what that error means.
Likely the client has not been in stalled or configured or both.
Also check that proper DSN is configured or not.
As you are using Oracle make sure that a TNSNAMES.ORA file exists and is in the proper place and accessible. See the operating system specific manual for details on the required name and location.
Check to see that the service name exists in one of the TNSNAMES.ORA files and add it if necessary.
Make sure there are no syntax errors anywhere in the file. Particularly look for unmatched parentheses or stray characters. Any error in a TNSNAMES.ORA file makes it unusable.
Hope this helps
Regards,
Shweta

Similar Messages

Error when attempting to create new Crystal Report against SAP BW

We're getting an error when attemptiing to create a new report using the SAP toolbar in CR:
"Failed to retrieve SSO2 logon ticket. Please contact your BW administrator".
Any ideas? We're able to run existing reports fine. Just can't create new ones using the toolbar.

Hi,
but you do realize that it is a pre-requisite ?
your BW system needs to be configured for reading and generating SSO token
Ingo

Error:When adding RDC runtime library (Crystal report XI R2) to Lotus notes

Background : We have reporting feature implemented in one of lotus notes application using crystal reports 6 (OCX) and as Crystal report is going to be upgraded to CR XI version in my organisation, we need to implement the same using RDC component available in crystal XI . we have installed Crytal report XI R2 - SP 6 version for testing the integration.
we are referring a document available on SAP web site(attached below) that illustrates the steps required to integrate the Crystal Reports® Report Designer Component into a Lotus® Dominou2122 application. http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/509b02de-a81e-2b10-f598-822b6d6f2024?quicklink=index&overridelayout=true
Steps which have been outlined for adding runtime library in lotus domino application is shown below:-
1. In Domino Designer, add a Form to the application.
2. In the programmeru2019s pane, go to the (Declarations) handler of the Form and enter:
Dim App As Variant, Dim Rep As Variant
3. Select Create | Object and select the u201CControlu201D radio button in the u201CCreate Objectu201D dialog box that comes up. From the list of controls, select u201CCrystal Report Viewer Control.u201D This adds the control to the Form.
4. Click on the control and select Edit | Properties. In the u201CAppletu201D properties dialog, select the u201CSize object to fit windowu201D radio button and then close the properties dialog.
We are getting an error message while trying to add 'Crystal Report Viewer Control' control (illustated in Step 3 above) in the lotus notes form . Error message which we get is 'An error has occured while processing a request on an object'.
Alternatively , we created the object of Crystal Report Viewer on lotus notes form by adding viewer object file (Crviewer.dll) from the file system after selecting the u201CObject from a fileu201D radio button in the u201CCreate Objectu201D dialog box and added following code in the postopen event of lotus notes form .
Set m_Viewer = Source.GetObject("Crystal Report Viewer Control")
Set App = CreateObject("CrystalRuntime.Application")
Set Rep = App.OpenReport(u201Cc:lotus
otes
ep.rptu201D)
Set m_Viewer.ReportSource = Rep
Again, when lotus notes form is opened , it gives error 'Variant does not contain object' at 'Set m_Viewer.ReportSource = Rep' .
Can any one suggest us any workaround or if iit is not possible in CR XI R2 into a Lotus® Dominou2122 application. Also, can any one provide us sample code if CR 2008 version can be integatred with lotus notes.

I believe, Lotus was never a "supported" development platform, though it did work - at one time or another. Eventually it did not and you are at that point. I think it was CR 10 where it started to be impossible to add the viewer to Lotus. This was never fixed and we never did find out if this was a Lotus thing or a CR thing.
Re. CR 2008 and Lotus. The RDC has been retired in CR 2008, so no luck there either for you. The only SDKs available in CR 2008 are for .NET and Java.
Ludek

Get error when add new object in crystal report

hi
i have this error "You are attempting to use functionality that falls under the Crystal Decisions Report Creation API license. This system does not have a valid license, or the evaluation copy of the license has expired. Please contact Crystal Decisions to obtain a Report Creation API license."
when i add new object in crystal report with vb.net
""CRReport.Sections.Item(ii).AddTextObject("new text", 1000, 0)
i do same program for 3 months ago but i lost it work without error
ihave a license key for crystal report
use cr10 with vb.net 2005
can help me
thanks

Also, check out the blog [Use of the Report Designer Component (RDC) in VS .NET|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID0468837450DB00359707053703393347End?blog=/pub/wlg/15939].
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

[Infoview - BOXI3.1] Error when attempting to schedule a crystal report

Hi,
I have an error, when i attempt to schedule a report. When i click on the "Format" link I get the error below:
An error has occurred:Item SI_XSLT_INFO was not found in the collection.
Googling this error suprisingly returns no results! I have no idea what could be at fault and would love to get some help from any experts! I am a very new user to business objects enterprise.
Thanks a lot in advance,
Dom

Hi Friend,
I faced the same problem while scheduling the crystal report in BO XI R3 Infoview.
How I resolved it is by publishing(Using Publishing Wizard) the crystal report in the BO XI R3 enterprise and then scheduling. It worked fine.
The crystal report which I created was in Crystal Reports XI and the new BO XI Infoview supports Crystal Reports 2008.
I think this might be the problem.
Thanks and Regards

Error when startup WPF Application with Crystal Report !

Hi!
I have an error when build & run a WPF Application with Crystal Report. Can anyone help me ?
First, I created 2 project, one is the WPF Application & one is Shell Start Up project (to show loading screen, then show main window when loaded, is WPF Application too)
WPF Application:
/// <summary>
    /// Interaction logic for MainWindow.xaml
    /// </summary>
    public partial class MainWindow : Window {
        public MainWindow() {
            InitializeComponent();
           // crViewer is SAPBusinessObjects.WPF.Viewer.CrystalReportsViewer
            crViewer.ViewerCore.ReportSource = new CrystalReport1(); // Assign report to viewer
Shell Startup:
[STAThread]
        public static void Main(string[] args) {
            AppDomain.CurrentDomain.UnhandledException += new UnhandledExceptionEventHandler(CurrentDomain_UnhandledException);
            Application app = new Application();
            ShowLoadingWindow(); // Show loading screen
            MainWindow mw = new MainWindow();
            mw.Show();
            app.Run();
        static void CurrentDomain_UnhandledException(object sender, UnhandledExceptionEventArgs e) {
            // Exception was throw here
And here is the exception & it's stack trace
Message: Object reference not set to an instance of an object.
Stacktrace:
at SAPBusinessObjects.WPF.Viewer.ViewerCore.<>c__DisplayClass1.<set_ReportSource>b__0()
   at SAPBusinessObjects.WPF.Viewer.DelegateMarshaler.<>c__DisplayClass29.<QueueOnThreadPoolThread>b__28(Object )
   at System.Threading.QueueUserWorkItemCallback.WaitCallback_Context(Object state)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback()

As far as I know the error is typically due to the fact that I'm trying to address an object that has not been set. E.g.; this could be due to bad scoping, bad inits/constructs, trying to access a member of a class without instance object and so on. I suspect this is a design \ code issue. You might be able to confirm this using [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx].
Other than that, I'd recommend creating a phone case here:
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
- Ludek

Exception-Error when excecuting JSP-File in Crystal reports for Eclipse

Hi,
I have created a jsp-File from an rpt-File in Crystal report for Eclipse. When I start the jsp-File on Apache Tomact 5.5 then only errors occurs.
Coud anyone help me?
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP:
An error occurred at line: 6 in the generated java file
Only a type can be imported. com.crystaldecisions.report.web.viewer.CrystalReportViewer resolves to a package
An error occurred at line: 7 in the generated java file
Only a type can be imported. com.crystaldecisions.reports.sdk.ReportClientDocument resolves to a package
An error occurred at line: 8 in the generated java file
Only a type can be imported. com.crystaldecisions.sdk.occa.report.application.OpenReportOptions resolves to a package
An error occurred at line: 9 in the generated java file
Only a type can be imported. com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase resolves to a package
An error occurred at line: 10 in the generated java file
Only a type can be imported. com.crystaldecisions.sdk.occa.report.reportsource.IReportSource resolves to a package
An error occurred at line: 13 in the jsp file: /Bericht1-viewer.jsp
ReportClientDocument cannot be resolved to a type
10:      try catch (ReportSDKExceptionBase e)
60:
An error occurred at line: 58 in the jsp file: /Bericht1-viewer.jsp
e cannot be resolved
55:
56:
57:      } catch (ReportSDKExceptionBase e)
60:
61: %>
Stacktrace:
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:93)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:330)
     org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:435)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:298)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:277)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:265)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:564)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:302)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:329)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.26 logs.
Apache Tomcat/5.5.26
Bericht1.jsp:
<%@page import="com.crystaldecisions.report.web.viewer.CrystalReportViewer,
com.crystaldecisions.reports.sdk.ReportClientDocument,
com.crystaldecisions.sdk.occa.report.application.OpenReportOptions,
com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase,
com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"%><%
     // This sample code calls methods from the JRCHelperSample class, which
     // contains examples of how to use the BusinessObjects APIs. You are free to
     // modify and distribute the source code contained in the JRCHelperSample class.
     try {
          String reportName = "Bericht1.rpt";
          ReportClientDocument clientDoc = (ReportClientDocument) session.getAttribute(reportName);
          if (clientDoc == null) {
               // Report can be opened from the relative location specified in the CRConfig.xml, or the report location
               // tag can be removed to open the reports as Java resources or using an absolute path
               // (absolute path not recommended for Web applications).
               clientDoc = new ReportClientDocument();
               // Open report
               clientDoc.open(reportName, OpenReportOptions._openAsReadOnly);
               // Store the report document in session
               session.setAttribute(reportName, clientDoc);
               // ****** BEGIN CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************
                    // Create the CrystalReportViewer object
                    CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
                    //     set the reportsource property of the viewer
                    IReportSource reportSource = clientDoc.getReportSource();
                    crystalReportPageViewer.setReportSource(reportSource);
                    // set viewer attributes
                    crystalReportPageViewer.setOwnPage(true);
                    crystalReportPageViewer.setOwnForm(true);
                    // Apply the viewer preference attributes
                    // Process the report
                    crystalReportPageViewer.processHttpRequest(request, response, application, null);
               // ****** END CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************
     } catch (ReportSDKExceptionBase e) {
         out.println(e);
%>
Thanks
Arnold

According to the release notes, for the JRCHelperSample to compile, you must set the target runtime for the project.
To do this, either create a project from scratch that uses the Tomcat 5.5 target runtime, or go to the properties menu and ensure that the target runtime is set to the application server you will be using.

Error while running Java application using Crystal Reports 2011

Hello,
I would like to ask for your help.
Environment details:
Java based standalone application in Development environment.
Crystal Reports 2011 (no SP applied)
Oracle 11g ( 32 bit client installed)
Win7 64 bit OS.
Workflow:
While running the java application, which will display the reports I am getting the below mentioned error. I guess that is because I am missing the Crystal runtimes (Correct me if I am wrong).
I know that CR2011 do not have any sdks/ jar available for deployment. In this case, which runtimes should I be using? Does installing CR2011 be enough in the development box?
Please provide me the link from which I can download the same.
Let me know if I need to provide more details on this. Any suggestions are most welcome.
Thank You.
Code used:
reportClientDoc = new ReportClientDocument();
System.err.println("Opening the Report ");
reportClientDoc.open(REPORT_PATH, 0);
// this is where the error or exception is thrown
_Error: _
log4j:WARN No appenders could be found for logger (com.crystaldecisions.reports.reportdefinition.ReportDocument).
log4j:WARN Please initialize the log4j system properly.
com.crystaldecisions.sdkreport.lib.ReportSDKException: com/businessobjects/reports/jdbinterface/common/DBException---- Error code:-2147467259 Error code name:failed
                at com.businessobjects.reports.sdk.JRCCommunicationAdapter.<init>(SourceFile:286)
                at com.businessobjects.sdk.erom.jrc.a.<init>(SourceFile:43)
                at com.businessobjects.sdk.erom.jrc.ReportAgentFactory.createAgent(SourceFile:46)
                at com.crystaldecisions.proxy.remoteagent.RemoteAgent.<init>(SourceFile:703)
                at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:662)
                at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:632)
                at com.crystaldecisions.sdk.report.application.ClientDocument.if(SourceFile:504)
                at com.crystaldecisions.sdk.report.application.ClientDocument.open(SourceFile:669)
                at com.crystaldecisions.reports.sdk.ReportClientDocument.open(Unknown Source)
                at rp.batch.bo.RpJRCExportReport.runReportExport(RpJRCExportReport.java:517)
                at rp.batch.bo.RpSchedReportRun.process(RpSchedReportRun.java:163)
                at rp.batch.bo.RpSchedReportRun.drive(RpSchedReportRun.java:240)
                at rp.batch.bo.RpSchedReportRun.main(RpSchedReportRun.java:265)
Caused by: java.lang.NoClassDefFoundError: com/businessobjects/reports/jdbinterface/common/DBException
                at com.crystaldecisions.reports.queryengine.Session.a2(SourceFile:244)
                at com.crystaldecisions.reports.datafoundation.DataFoundation.do(SourceFile:376)
                at com.crystaldecisions.reports.dataengine.dfadapter.DFAdapter.do(SourceFile:111)
                at com.crystaldecisions.reports.dataengine.datafoundation.CreateDataConnectionCommand.new(SourceFile:81)
                at com.crystaldecisions.reports.common.CommandManager.a(SourceFile:71)
                at com.crystaldecisions.reports.common.Document.a(SourceFile:203)
                at com.businessobjects.reports.reportconverter.v12.e.a(SourceFile:442)
                at com.businessobjects.reports.reportconverter.v12.e.a(SourceFile:231)
                at com.businessobjects.reports.reportconverter.v12.d.m(SourceFile:192)
                at com.businessobjects.reports.reportconverter.v12.f.if(SourceFile:210)
                at com.businessobjects.reports.reportconverter.v12.V12SaveLoader.a(SourceFile:242)
                at com.businessobjects.reports.loader.ReportLoader.a(SourceFile:205)
                at com.businessobjects.reports.sdk.JRCReportLoader.a(SourceFile:137)
                at com.businessobjects.reports.sdk.JRCReportLoader.a(SourceFile:76)
                at com.businessobjects.reports.sdk.requesthandler.ReportDocumentRequestHandler.a(SourceFile:136)
                at com.businessobjects.reports.sdk.JRCCommunicationAdapter.<init>(SourceFile:229)
                ... 12 more
Caused by: java.lang.ClassNotFoundException: com.businessobjects.reports.jdbinterface.common.DBException
                at java.net.URLClassLoader1.run(URLClassLoader.java:200)
                at java.security.AccessController.doPrivileged(Native Method)
                at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
                at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
                at sun.misc.LauncherAppClassLoader.loadClass(Launcher.java:301)
                at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
                at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
                ... 28 more

Help me ...
Ambient:
Crystal Reports Viewer 14.0.0.0
java.vendor = Sun Microsystems Inc.
java.version = 1.6.0_37
os.name = Windows NT (unknown)
os.version = 6.2
os.arch = amd64
Exception:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: com.businessobjects.sdk.erom.jrc.ReportAgentFactory---- Error code:-2147215357 [CRSDK00000026] Error code name:internal
          at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(ReportSDKException.java:112)
          at com.crystaldecisions.proxy.remoteagent.RemoteAgent.createDefaultAgent(RemoteAgent.java:1000)
          at com.crystaldecisions.sdk.occa.report.application.ClientDocument.initRemoteAgent(ClientDocument.java:770)
          at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(ClientDocument.java:961)
          at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.open(ReportClientDocument.java:226)
          at src.HelloWorldSwing.createAndShowGUI(HelloWorldSwing.java:54)
          at src.HelloWorldSwing.main(HelloWorldSwing.java:24)
Source:
import java.awt.BorderLayout;
import javax.swing.JFrame;
import com.crystaldecisions.ReportViewer.ReportViewerBean;
import com.crystaldecisions.sdk.occa.report.application.DatabaseController;
import com.crystaldecisions.sdk.occa.report.application.OpenReportOptions;
import com.crystaldecisions.sdk.occa.report.application.ReportClientDocument;
import com.crystaldecisions.sdk.occa.report.data.IConnectionInfo;
import com.crystaldecisions.sdk.occa.report.reportsource.IReportSource;
public class HelloWorldSwing {
           * @param args
          public static void main(String[] args) {
                    HelloWorldSwing pgm = new HelloWorldSwing();
                    try {
                              pgm.createAndShowGUI();
                    } catch (Exception e) {
                              e.printStackTrace();
                              //JOptionPane.showMessageDialog(null, e.toString());
           * @throws Exception
          public void createAndShowGUI() throws Exception {
                    // Make sure we have nice window decorations.
                    JFrame.setDefaultLookAndFeelDecorated(false);
                    // Create and set up the window.
                    JFrame frame = new JFrame("HelloWorldSwing");
                    frame.setTitle("Titolo del Report");
                    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
                    ReportViewerBean viewer = new ReportViewerBean();
                    viewer.init(new String[0], null, null, null);
                    ReportClientDocument rpt = new ReportClientDocument();
                    rpt.setReportAppServer(ReportClientDocument.inprocConnectionString); // inproc:jrc
                    rpt.open("Report.rpt", OpenReportOptions._openAsReadOnly);
                    IReportSource rptSource = rpt.getReportSource();
                    viewer.setReportSource(rptSource);
                    frame.getContentPane().add(viewer, BorderLayout.CENTER);
                    frame.setSize(1930, 1030);
                    frame.setVisible(true);
                    viewer.start();

Error WHen trying to print a crystal report

I am trying to print a system crystal report and it is giving me the following error: "Error during printing; ensure all parameters are defined". And it prints the first page, but none of the consecutive pages if there are more than 1. Is there some type of setting that needs to be set for printing?

Hmmmmm it says "page range" ALL. I was able to print fine until I created a new layout and saved it. THen I went to print it and got the error. But it seems I get the error when I print any crystal report in any DB. Is this a setting in crystal, SAP, or printer itself? I can print the second page if I toggle through to the second page on the crystal report view, and go to print, and put 2 next to pages feild. Otherwise it is set to print ALL, however it is not doing that.

Encounter the 0ra-01921 error when run catlog.sql on 11g windows server

I am using sys account to run catlog.sql there is an error : ERROR at line 1:
ORA-01921: role name 'IMP_FULL_DATABASE' conflicts with another user or role name
when I try to run it with my dba account it cause more error????
Thank You

I am using sys account to run catlog.sql there is an
error : ERROR at line 1:
ORA-01921: role name 'IMP_FULL_DATABASE' conflicts
with another user or role name
when I try to run it with my dba account it cause
more error????
Thank Youyou mean catalog.sql ?
What's the reason you want to regenerate database dictionary?
when you run catalog.sql and catproc.sql on live database you will get these errors because the objects already exists. You can ignore them. You will get other errors when create public synonym etc..

Opening Excel Workbook Fails when run from Scheduled Task on Windows Server 2008 Rw

Hi,
I have a little vbs script that instantiates the Excel.Application object and then opens a work book to perform some tasks on it. The script runs fine when run from the command line. When I attempt to run it as a scheduled task (it is supposed to update
data that is pulled from a SQL Server at regular intervals), it fails with the following error:
Microsoft Office Excel cannot access the file 'c:\test\SampleWorkbook.xlsm'. There are several possible reasons: .....
The file does exist. The path reported in the error is correct. The account under which the task is running is the same account I use to run it from the command line. User Account Control is not enabled, and the task is set up to run with highest privileges.
When I run the same script through the Task Scheduler from a Windows Server 2003 machine, it works without issue.
I was just wondering if somebody on this forum has run into a similar issue in connection with Windows Server 2008 R2 and figured out what the magic trick is to make it work. I'm sure it is rights related, but I haven't quite figured out what which rights
are missing.
Thanks in advance for any advice you may have.

This is truly killing me ... trying to get it working on Windows Server 2012 without success.
I desperately need to automate running Excel macros in a "headless" environment, that is non-interactive, non-GUI, etc.
I can get it to work using Excel.Application COM, either via VBScript or Powershell, successfully on many other Windows systems in our environment - Windows Server 2008 R2, Windows 7 (32-bit), etc., -BUT-
The two servers we built out for running our automation process are Windows Server 2012 (SE) - and it just refuses to run on the 2012 servers - it gives the messages below from VBScript and PowerShell, respectively-
I have tried uninstalling and re-installing several different versions of Microsoft Excel (2007 Standard, 2010 Standard, 2010 Professional Plus, 32-bit vs. 64-bit, etc.), but it makes no difference.
Would be extremely grateful if any one out there has had any success in running Excel automation on Server 2012 in a non-interactive environment that they could share.
( I have tried adding the "%windir%\syswow64\config\systemprofile\desktop"
folder, which did fix the issue for me when testing on Windows Server 2008 R2, but sadly did not resolve it on Windows Server 2012 )
[VBScript error msg]
Z:\TestExcelMacro.vbs(35, 1) Microsoft Office Excel: Microsoft Office Excel cannot
access the file 'Z:\TestExcelMacro.xlsm'. There are several possible reasons:
• The file name or path does not exist.
• The file is being used by another program.
• The workbook you are trying to save has the same name as a currently open work
[Powershell error msg]
Exception calling "Add" with "0" argument(s): "Microsoft Office Excel cannot open or save any more documents because th
ere is not enough available memory or disk space.
To make more memory available, close workbooks or programs you no longer need.
To free disk space, delete files you no longer need from the disk you are saving to."
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : ComMethodTargetInvocation
You cannot call a method on a null-valued expression.
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull

Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC

I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
2 - Domain Controllers running Server 2012
1 - Exchange Server 2013 running on Server 2012
I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_search_s() finished, return code is 0x20
[2014/04/05:09:12:38.873]
Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_modify_s() finished, return code is 0x13
[2014/04/05:09:12:38.905]
Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[User Action]
Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
[2014/04/05:09:12:38.936]
Adprep encountered an LDAP error.
Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
DSID Info:
DSID: 0x181112dd
ldap error = 0x13
NT BUILD: 9600
NT BUILD: 16384
[2014/04/05:09:12:38.967]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
Any Help would be appreciated. Thanks!

Hi,
did you check which servers has FSMO roles?
You can do that via command prompt: netdom query fsmo
For forestprep you must do that on DC which have Schema Operations marter role.
Command
Domain controller
Number of times to run the command
adprep /forestprep
Must be run on the schema operations master for the forest.
Once for the entire forest
adprep /domainprep
Must be run on the infrastructure operations master for the domain.
Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
Note
Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

Win 7 automation error when running crystal 10 reports

I am getting automation and memory type errors when running crystal 10 reports through a VB6 application on WIN 7 32 bit PC...
does not happen on all win7 PCs, in fact, the reporting will work for a time and then errors, but once getting the errors, seems like the reports will not run again.

Honestly, not a clue. I've never even thought of putting CR 10 (designer or runtime) on WIN 7. Now I assume this is not CR 10.5 (bundles with .NET 2008).
See [this|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki.
Ludek

Intermitten Errors when running reports in Crystal Report Viewer

Hi All,
We get intermittent errors when running the same crystal report over and over again. Most of the time, it would run perfectly fine. Once in a while we would see the error message below displayed...
Failed to open the connection. Failed to open the connection. C:\DOCUME1\USBOAD1\LOCALS~1\Temp\{432E6564-2811-4364-84FB-5E315F8DCBCA}.rpt
CrystalReportViewer - CrystalReportViewer1
Error: Object reference not set to an instance of an object.
We don't know how to reproduce this error. We tried looking into the BusinessObjects log files and the error is trapped inside C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Logging\crystalras_2009420_3626_2716_ras.log with the message below:
ErrorLog 2009 4 21 11:28:28.598 2716 10272 (\servers\ras\dtsagent\reporthandler.cpp:11592): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11588 ErrorCode:756 ErrorMsg:"Failed to open the connection.
Failed to open the connection.
C:\DOCUME1\USBOAD1.000\LOCALS~1\Temp\{432E6564-2811-4364-84FB-5E315F8DCBCA}.rpt" DetailedErrorMsg:"
Question:
Does anyone know why this is happening? Any help will be much appreciated. It happens maybe 1 out of 10 times the report runs.
Versions:
CR XI R2 SP1
.Net Framework 2.0
Windows 2000 SP4

Hi,
Give it a try by using the close and dispose method for report object and also use the GC.collect.
Hope it helps!!
Amit

Error when running a report on CMC

Error in File Maintenance Costs by Work Code: Max processing time or Max records limit reached .
I can run this report through Crystal Reports 9 installed on my desktop and do not have any problems having data returned. However, when I upload it to the console and try to run it through CMC I get the above error.
Any suggestions?

Thank you for your help. I had to make a change in the CR Processing Server so your answer put me in the right direction.
We are using CR Server 2008.
I had to set the value at 0 for Database Records Read When Previewing or Refreshing (0 for unlimited):
Thank you again!
Lisa
I also had to make a few other changes as well.
Edited by: Lisa Beggs on Jul 1, 2009 3:59 PM

Error message when trying to view/print Crystal reports in B1

I get the following Error message when trying to view/print crystal reports in SAP B1/Crystal Reports Integration Tool for SAP Business One:
" Could not load file or assembly 'Crystal Decisions Windows Forms, version=12.0.2000.0, Culture=neutral, Public Key Token=692fbea551e1304' or one of its dependencies. The system cannot find the file specified. ????

Hi
Common issues for this :
1. Once you install crystall add on ,you need to go to Crystal report Administration >Account setup .
Put on the user name and password and click on creating ext tables
Try then running the report .
If not the case ,
make sure you install runtime .
You need :
1.Crystal report basic from SAP download -(Not necessary if you want only report viewer >
2.You need to have crystal integration addon (I think service pack is SP1)
3.Make sure you have runtime install
When you are installing ,make sure you restart your PC before you do or remove temporary file s
Hope this solves your issue
Bishal

Error when running a report in Crystal Reports Server 2008

Similar Messages

Maybe you are looking for