Error when save a file as .wav format

I was trying to save some sound pressure data into .wav file.  I have a single wavform channel looks like this:
Once saved as .wav file, the data becomes:
What did I do wrong?

The *.wav file specification says that the DBL data type may only be used if all the channel values are between -1 and +1.  That channel exceeds these limits slightly, therefore an integer data type is used.
You can simply rescale the channel prior to saving-- either smaller in amplitude to use the DBL data type or larger in amplitude to use the full range of an Int16 or an Int32.

Similar Messages

  • Error when save word file with easy dms

    Hey,
    When I want to save an word file with easy dms I got the following error:
    "An error occured while creating the original attribute for WWI".
    I have no idea why.
    Thanks for your support.
    BR,
    Christoph

    Hi Christoph,
    You need to check the following configurations
    1) Transaction DC20: Whether data carrier has been defined
    2) Transaction DC10: Define document types
    3) Transaction DC30: Define workstation application
    4) Transaction OAC0: Define content repositories
    5) Transaction CSADMIN: Check status of content repository
    Regards,
    Deepak Kori

  • Illustrator cs5 can't saved the file or unknown error when save

    Hello,
    I have couple of brand new Mac OS X 10.6.4 with Adobe Ilustrator CS5 running on Intel Xeon Quad Core and 3GB of RAM.
    All updates including OS have been applied recently. For some reasons, the file that was worked on any of this computer can't be saved to any other format other than illustrator template itself. When saved, it either just crashed or gave an error "an unknown error has occured".
    So, I save the file as template and tested on the PC configure that has 8GB of RAM, Intel Quad Core and still couldn't save the file into .ai format. Same error was given.
    I tested the illustrator on mac with few simple lines or vector graphics and it could save fine.
    I thought it was the file itself but it appeared to be not. Due to, same design method was produced on the old mac os system with cs2 worked fine.
    Does anyone know what is wrong? I called the Adobe techs and they transfered me to someone in India who didn't know what causing it either.

    Also, I tried to reset the prefs and settings, uninstall with cleaner tool and reinstall, reload the transparent setting, etc.. including some steps the adobe techs told me.
    It still gave same error.

  • When saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?

    when saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?. i would like to know what changes, so in the future i can set my camera to a setting that will give me the highest quality to begin with,allowing me to make crops and still preserve the quality.
    thank you
    dovid

    It's the level of compression. Lower number, more aggressive compression, more visual artifacts.
    Aside from that you should never use jpeg as a working format. The compression is destructive and cumulative, and the file deteriorates every time you resave it.
    Use TIFF or PSD, and if you need jpeg save out a copy as a single final step.

  • Error in InfoPackage: Error when uploading Flat Files

    Hello Experts,
    I encoutered this error in Info Package when uploading a flat file.
    When i try to click on the "Preview" button, this errors appear:
    "Error 8 when compiling the upload program: Row
      237, message: Data Type / BIC/ CCCBMA1_COCTR2 was found in a newer"
    Please help to advise what is this error about and how to resolve this?

    hi Annie,
    run RSA1 and try again
    Error when compiling the upload program (Message no. RSAR233)
    other similar problem solved by run program(SE38)RS_TRANSTRU_ACTIVATE_ALL and relogon
    A newer version of the data type error when loading
    Flat File Preview error message
    Error when loading from Flat File
    Error message when previewing data in InfoPackage
    hope this helps.

  • Error when publishing to file

    i keep getting "an unknown error" when publishing to file or publishing all to mobileme...
    It still works if i just publish to mobileme.
    Any ideas?
    Im trying to get my site going on go daddy, and kinda really need it in a folder...

    If you are still getting the error then its likely that you have a corrupt domain file.
    To prove this, quit iWeb, create a new folder on your desktop and drag your domain file out of - Home Folder/Library/Application Support/iWeb - into this.
    Relaunch iWeb to force it to create a new domain file, add some content and try publishing to a folder.
    If this works, your original file is corrupt.

  • Multiple JavaScript errors when opening aspx file in Dreamweaver

    I get multiple javascript errors when opening aspx file in Dreamweaver similar to... "While executing translateHyperLink in ExternalRenderers.htm, a JavaScript error occurred."

    Hi Steven,
    Not sure if this is related, but can  you try the solutions in Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6
    Thanks,
    Preran

  • Error when creating ZIP file (return value 2 when IGS was called)

    Hello All
    I attempted to Schedule a Query to the Portal folders and executes fine.  However when it's scheduled to and email, I am getting this message
    'Error when creating ZIP file (return value 2 when IGS was called)'
    Any ideas?
    Thanks ...BK

    Hello Kai
    Thanks very much for the info.  how would I know what patch the IGS is?
    Thank you.
    Regards..BK

  • When we save a file in excel format from the webpage, the alignment of columns is disturbed which does not happen in IE, P

    We are using Oracle Apps. wherein we have an options to export the contents of the web page. It default stores the file in .tsv format. if we choose to save the file in excel then the file is saved. however when we open the file in excel, the text is garbled. If we try the same option using IE, then the text is automatically aligned as required.

    Dear cor-el, wow you are quick. I understand you better now, but I'm not sure it's a good idea to write to you in dutch, only if you are Dutch yourself.
    Anyway, first the location bar is what I call the address bar.
    Second I work very simple and easy. I never use the address bar when I'm looking for a website.
    I just type the name of whatever I'm looking for in the empty bar on my google page and wait for the response.
    Third, most of the sellers I buy from on ebay, I just discovered by accident and I immediately saved them in my favorites bar.
    So if I need to go to their website(s) I just go to my favorites bar and click on the name of the seller(s) I'm looking for.
    Now to answer the question from your earlier letter, the URL's I'm trying to save are those from the webpage(s) I open on the websites I visit and not from the website(s) itself.
    The second part of your last letter from " You can modify......" is too difficult for me to understand.
    If it's important I'll ask a friend, a mainframe specialist to explain it to me.
    Thanks again for help. Regards, Ruiz

  • Error when saving audio file

    I am having an issue when trying to save an audio file.  Looking for some help on what might be causing the problem.  With the audio file highlighted, I select Save As and title the file.  When I hit OK, this error comes up..The file is in use by another application and cannot be overwritten.  I am saving the file name as something new so it is not trying to overwrite a file with the same name.  Also there is not another Audition opened in the background or any other programs that could cause "another application" error.  Thanks for your help.

    Thank you for the reply.  Here is what I determined.  Sorry I couldn't answer all your questions.  I'm don't know everything about computers and networks, just enough to be dangerous.
    File length doesn't make a difference (try save a file of only a few samples) I tried record length of a few seconds to five minutes and it happens on all different file lengths.
    You have not had this issue with Adobe Audition 2.0 and Cool Edit Professional 2000, it has never worked in Audition CS5.5 We have one computer that has Audition 2.0 and have no problems with that.  Previously used CoolEdit and no problems with that either.
    You  can save the file to the local workstation drive and then copy it using  Windows Explorer to the network share with no issues.  Saving to the local computers hard drive works everytime and then I am able to copy that file to the desired network drive.
    You are using Windows Storage Server 2003 in a Raid 10 array for your storage server. Sorry do not know
    Active Directory and the workstations have the proper permissions to read and write to the network shares.  Yes
    The workstations running Adobe Audition CS5.5 are running Windows 7 Profession 32bit and have Active Directory Login.  Yes.  They are Windows 7 32 bit.  Not sure about Active Directory Login
    You are able to save to the local drive and copy the file to the same network share via Windows Explorer.  Yes
    Toggling the saving of Metadata and Markers doesn't make a difference.  Sorry do not know
    You are able to save as other formats (try AIFF, MP3, and a SESX session). Able to save MP3's to the notwork drive.  only .wav are having issues
    Running Audition as Administrator makes no difference.  No difference
    Running Audition in XP compatibility mode makes no difference.  Tried that and still had same issues
    Turning off the writing of .pkf files doesn't make a difference.  Sorry not sure how to do that
    I hope this helps and I apologize for not being able to answer all your questions.
    Best regards

  • SharePoint 2013 Foundation error when uploading Excel files

    Hello 
    I have a specific problem. I have an xlsx file that I cannot upload in SharePoint. Normally our SharePoint can upload Excel files and other file formats normally but this one has data with nearly 5000 rows. The size of the file is less then 500 KB. The error
    message is: "The URL is invalid. Perhaps it refers to a nonexistent file or folder, or it refers to a valid file or folder in the current Web." When I am uploading this file I am getting the same error message in every library. When I save
    the file as a 97-2003 compatible xls then it works. Sometimes even Excel files with Macros won't upload. 
    Kind regards
    ivicapro1987

    Hi,
    This issue occurs when the Version column is configured as an Indexed Column. 
    To work around this issue, remove the Version column from the list of Indexed Columns for the list that has this issue. To do this, follow these steps:
    Browse to the list where the issue exists.
    In the ribbon, click the Library tab, and then click
    Library Settings.
    In the fields list, click Indexed Columns.
    In the Indexed Columns list, click Version.
    Click Delete, and then click OK.
    Upload any files that you previously experienced the issue with.
    Reference:
    https://support.microsoft.com/kb/2796640?wa=wsignin1.0
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Security error while save pdf files in portal

    I am using SAP EHSM 1.0 a portal based application for SAP EH&S. It uses ADS for generating interactive forms. Forms are getting generated with out error but when saving it the portal throws the below error
    Upload of this file type (application/pdf) is not allowed (security issues)
    I thought its an security related to issue with ADS but then when I tried to upload a PDF while from my desktop and I got the same error.
    Is there a setting in NetWeaver  portal to allow PDF extension. Please let me know. Thanks.
    Thanks
    Pugazh

    Check whether you have S_GUI Authorization Object in ECC ? if you don't have it, check with your security team to assign it for you in a ROLE and the values below
    Possible values:
    61: Download; This authorizes you to save lists displayed on the screen in local files (either unconverted, in spreadsheet format, or in Rich Text Format). This authorization can only be granted or denied fo all lists in the system - you cannot restrict it to a selection of lists.
    60: Upload; This authorizes you to load data into the system using ws_upload or gui_upload. You cannot select the data to be uploaded.
    04: Print; (not used)
    02: Change; (not used)
    Regards,
    Arjun

  • Receiving General Error when opening Project file in FCP 5.04

    Hi to everyone.
    I would need a little help. We have 4 Macs running (two G5 and two Laptops). All running with FCP Pro 5.04.
    When I create a project on my G5 and open it with my laptop everything runs fine. When I make some edits/renders and save the project and try to open it again, I receive a General Error message.
    But on the other two machines the file opens. I have used FCP rescue, trashed also manually the prefs, deleted on the G5 the Render files, made a PRAM zap, used Disk Utility, cleared the Wavecache etc. but no result. The Mediafiles are stored on a LACIE 500 GB. I do work this way since years and never had this before.
    Does anybody have an idea ?Thanks in advance.
    Zzz
    G5 2 Ghz Dual Core and G4 Laptop   Mac OS X (10.4.8)   4.5 Gig Ram, LA CIE 500 G

    Hi everyone,
    at first thanks for the replies. I tried already the New User account. It's not working and also the Lacie is fine. The problem is more complicating, I guess.
    Basically it's funny that the problem starts, when I have already worked in the project. When I set up the project (load picture and sound files all standard formats, Uncompressed picture and Aiff sound) and save the project, it opens simply, when I work in the project, edit, render etc (pluggins are on both machines identicall) and save (after deleting the render files), my machine is the only one who gives General Error.
    Funny is that I used FCP since years in the same setup (Desktop-laptop) and never had this. I already trashed even the trash -:)
    So I guess that this problem is a really special one, perfect for all Mac Sherlocks to solve -:)
    So if anyone has an idea....
    Cheers Zolee

  • Rep-1247 error when starting jsp file on linux

    I have a rather frustrating problem on our production servers...
    We are trying to start jsp files on a linux report server (10Gr2).
    The command is displayed below
    [2007/10/8 10:57:59:853] Info 50132 (EngineImpl:setCommandLine): Get command line: baseUrl=http://xxxxx:7777/reports/rwservlet/getfile/ userid=reporting@SHARED_BE USER_AGENT=Java/1.5.0_07 SERVER_NAME=xxxxxxxxx jobname="/opt/ogreports/catalog/SMC/BE-Shared/xxxx.jsp" destpath="/var/data/og/dashboard/van/sgs/001/reports/xx" getFilestr=/no> imagekey=reports9i par_end_date="01-10-2007" desname=xxxxxxxxxxx.pdf REMOTE_ADDR=127.0.0.1 SERVER_PROTOCOL=HTTP/1.1 authid=RWUser par_start_date="01-09-2007" destype=rcpfile REMOTE_HOST=127.0.0.1 SERVER_PORT=7777 CONTENT_TYPE=application/x-www-form-urlencoded report="/opt/ogreports/catalog/SMC/BE-Shared/xxx.jsp" expiredays=0 baseimageurl=http://xxxxx:7777/reports/rwservlet/getfile/HW/YX+JkD0HSAcVLzaSGilrWNAn36ufghgStsvQqfNFC7w== schedule="00:00 Oct 08, 2007" scphost="lion" desformat=pdf SCRIPT_NAME=/rwservlet par_id_project="1750"
    The after paramform does some major data manipulations, writing to temporary tables (on commit preserve rows), that are used in queries from the reports.
    This seems to go allright. The setup of all queries, program units etc passes as well. But when the report has to start formatting, I get a "1247 Program Unit not compiled" error message. This is an excerpt from the engine trace
    [2007/10/8 11:40:40:243] Debug 50103 (EngineImpl:getCacheData): Start
    [2007/10/8 11:40:40:243] Debug 50103 (EngineImpl:getCacheData): m_jobId = 9182
    [2007/10/8 11:40:40:244] Debug 50103 (EngineImpl:getCacheData): Quit
    [2007/10/8 11:40:40:534] Error 50103 (C Engine): 10:40:40 ERR REP-1247: Report contains uncompiled PL/SQL.
    [2007/10/8 11:40:40:535] Error 50103 (rwfdt:rwfdtprint): 10:40:40 ERR Error occurred sending Job output to cache
    [2007/10/8 11:40:40:536] Error 50103 (rwfdt:rwfdtfl_FreeDistList): running
    [2007/10/8 11:40:40:536] Error 50103 (rwfdt:rwfdtfl_FreeDistList): quit
    [2007/10/8 11:40:40:580] Debug 50103 (EngineImpl:run): CRunReport returns: 1247
    [2007/10/8 11:40:40:608] Debug 50103 (EngineImpl:run): Quit
    [2007/10/8 11:40:40:699] Exception 1247 (): Report contains uncompiled PL/SQL.
    oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
    at oracle.reports.engine.EngineImpl.run(EngineImpl.java:447)
    at oracle.reports.engine._EngineClassImplBase._invoke(_EngineClassImplBase.java:90)
    at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
    at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
    at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
    at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
    I know that 1247 normally covers up another error, but I don't seem to get it....
    Funny thing is, when copying the jsp's to another reports server, they do run (on the same DB).
    Message was edited by:
    user599601

    I have a rather frustrating problem on our production servers...
    We are trying to start jsp files on a linux report server (10Gr2).
    The command is displayed below
    [2007/10/8 10:57:59:853] Info 50132 (EngineImpl:setCommandLine): Get command line: baseUrl=http://xxxxx:7777/reports/rwservlet/getfile/ userid=reporting@SHARED_BE USER_AGENT=Java/1.5.0_07 SERVER_NAME=xxxxxxxxx jobname="/opt/ogreports/catalog/SMC/BE-Shared/xxxx.jsp" destpath="/var/data/og/dashboard/van/sgs/001/reports/xx" getFilestr=/no> imagekey=reports9i par_end_date="01-10-2007" desname=xxxxxxxxxxx.pdf REMOTE_ADDR=127.0.0.1 SERVER_PROTOCOL=HTTP/1.1 authid=RWUser par_start_date="01-09-2007" destype=rcpfile REMOTE_HOST=127.0.0.1 SERVER_PORT=7777 CONTENT_TYPE=application/x-www-form-urlencoded report="/opt/ogreports/catalog/SMC/BE-Shared/xxx.jsp" expiredays=0 baseimageurl=http://xxxxx:7777/reports/rwservlet/getfile/HW/YX+JkD0HSAcVLzaSGilrWNAn36ufghgStsvQqfNFC7w== schedule="00:00 Oct 08, 2007" scphost="lion" desformat=pdf SCRIPT_NAME=/rwservlet par_id_project="1750"
    The after paramform does some major data manipulations, writing to temporary tables (on commit preserve rows), that are used in queries from the reports.
    This seems to go allright. The setup of all queries, program units etc passes as well. But when the report has to start formatting, I get a "1247 Program Unit not compiled" error message. This is an excerpt from the engine trace
    [2007/10/8 11:40:40:243] Debug 50103 (EngineImpl:getCacheData): Start
    [2007/10/8 11:40:40:243] Debug 50103 (EngineImpl:getCacheData): m_jobId = 9182
    [2007/10/8 11:40:40:244] Debug 50103 (EngineImpl:getCacheData): Quit
    [2007/10/8 11:40:40:534] Error 50103 (C Engine): 10:40:40 ERR REP-1247: Report contains uncompiled PL/SQL.
    [2007/10/8 11:40:40:535] Error 50103 (rwfdt:rwfdtprint): 10:40:40 ERR Error occurred sending Job output to cache
    [2007/10/8 11:40:40:536] Error 50103 (rwfdt:rwfdtfl_FreeDistList): running
    [2007/10/8 11:40:40:536] Error 50103 (rwfdt:rwfdtfl_FreeDistList): quit
    [2007/10/8 11:40:40:580] Debug 50103 (EngineImpl:run): CRunReport returns: 1247
    [2007/10/8 11:40:40:608] Debug 50103 (EngineImpl:run): Quit
    [2007/10/8 11:40:40:699] Exception 1247 (): Report contains uncompiled PL/SQL.
    oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
    at oracle.reports.engine.EngineImpl.run(EngineImpl.java:447)
    at oracle.reports.engine._EngineClassImplBase._invoke(_EngineClassImplBase.java:90)
    at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
    at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
    at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
    at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
    I know that 1247 normally covers up another error, but I don't seem to get it....
    Funny thing is, when copying the jsp's to another reports server, they do run (on the same DB).
    Message was edited by:
    user599601

  • REP-57000 Error When Generating a Report in EXCEL format

    Hello All,
    We're encountering an error that says "REP-57000: Oracle Reports API - Internal error: Item: oracle.reports.definition.RWReport;Prop:34; Attr: ]] ...".
    The report works fine and is able to generate an EXCEL file when it retrieves around 3K records. We only encounter the error when the number of records exceeds 5K.
    What is the cause of the error? Additional note, we're using Oracle Reports Server ver.10.1.2.0.2.
    Any help would be greatly appeciated. =)

    In the reports engine conf file (Example on UAT -> rep_lonshutl5n2_10gr2_forms_reports_service.conf) add JVM Heap Options
    jvmOptions="-Xms512m -Xmx512m"
    First option is the minimum heap size and second is maximum. The size is in MB and max size can go up to 4000 depending on physical/virtual memory available on Operating System.
    Change this Value from 512-2000 and try running your report
    In case this doesn't solve your problem, change your output Format to DELIMITEDDATA and try running the reports. There is a bug in Oracle that it doesn't support large excel outputs in DELIMITED format.

Maybe you are looking for