Error when sending more than 500 Characters

Hello all,
I am not sure if I should be posting here or in the
ColdFusion Forum, so I apologize ahead of time if I am in the wrong
place.
I am Using a Flex frontend and a ColdFusion backend to edit
data in a simple Access Database (for testing). I have a ColdFusion
CFC on the backend that handles everything just fine until I enter
in more than 500 characters (Actually 510) into my text area and
then I get the error "Unable to invoke CFC - Error Executing
Database Query.". Now you might be saying that either the database
field is not set to handle that many characters or the CFC is
restricting more than 500 characters, but they are not. The
database field is set to "memo" and the maxlength in the CFC is set
to 5000. I am wondering if has something to do with Access
databases I do not know because I don't use them that often.
I have tested this over and over and it only throws the error
if I exceed 510 characters in the Flex TextArea.
Any thoughts are appreciated.
The CFC code is below I didn't add the MXML because I figured
there was nothing special about the TextArea block:

The code should be in my initial post.
Very strange as to why this worked but just in case someone
else has the same problem here is how I got it to work.
I just changed this line:
rss_copy = <cfqueryparam value="#arguments.rss_copy_edit#"
cfsqltype="cf_sql_varchar" maxlength="5000">
to this:
rss_copy = '#arguments.rss_copy_edit#"'
and it worked just fine.
Not the best solution but it works fine now all the
same.

Similar Messages

Error when inserting more than 500 characters

Hello all,
I am not sure if I should be posting here or in the Flex
Forum, so I apologize ahead of time if I am in the wrong place.
I am Using a Flex frontend and a ColdFusion backend to edit
data in a simple Access Database (for testing). I have a ColdFusion
CFC on the backend that handles everything just fine until I enter
in more than 500 characters (Actually 510) into my text area and
then I get the error "Unable to invoke CFC - Error Executing
Database Query.". Now you might be saying that either the database
field is not set to handle that many characters or the CFC is
restricting more than 500 characters, but they are not. The
database field is set to "memo" and the maxlength in the CFC is set
to 5000. I am wondering if has something to do with Access
databases I do not know because I don't use them that often.
I have tested this over and over and it only throws the error
if I exceed 510 characters in the Flex TextArea.
Any thoughts are appreciated.
The CFC code is below I didn't add the MXML because I figured
there was nothing special about the TextArea block:

Very strange as to why this worked but just in case someone
else has the same problem here is how I got it to work.
I just changed this line:
rss_copy = <cfqueryparam value="#arguments.rss_copy_edit#"
cfsqltype="cf_sql_varchar" maxlength="5000">
to this:
rss_copy = '#arguments.rss_copy_edit#"'
and it worked just fine.

Maintenace view for fld more than 500 characters

Ho do i create a maintenance view for fld more than 500 characters? i need a maintenance view to maintain URL which is sometimes more than 500 chars.

The way SAP solves this for webservices is via a hash.
Once you have executed the service, the URL populates a mapping table and generates a unique hash value for it.
Via this hash, you can assign it to authorization fields and use it in your coding where the fields have limitations.
As a consequence this causes some confusion if you dont use F4, but it does work.
Cheers,
Julius

Lot of time in support message and send more than 500 emails...

Hi experts,
I have a BIG problem, this weekend i update to EHP1 my solution manager (without problems).
Now, i want sent a support message with the workcenter and spend more than 15minutes and after, when the message is sent, appear more than 500emails... why???? What happend???
Thanks in advance,
Regards,

The content of the pdf is the standar:
The support message: <number>
description: test
el status of the support message is: <status>
And i receive more than 500 emails, with the same pdf...
Regards,

Rendering Error when using more than one DataSheetView on a Enterprise Wiki-Page

Hi Experts,
how to reproduce:
Add two Custom Lists with some Fields (Add Lookup-Columns to both Lists).
Add a DataSheetView to each List and mark it as Default-View
Create a Enterprise Wiki-Page
Add a WebPart (Custom-List-1)
You will see the Content from List 1 as DataSheet-View (because it is the Default-View)
Add another WebPart below the previous added WebPart (Custom-List-2)
You will see the Content from List 2 as DataSheet-View (because it is the Default-View)
Notice that the First DataSheet has faulty Rendering. The Lookup-Columns having more than one 'Arror-Down' Image and it is even on the left. If you click into different Column, different row you get the same.
I can reproduce this behaviour anytime.
Environment: SharePoint 2013 Enterprise, IE10
If you use Development-Tools to identify first datarow of first DataSheet you can see that it has to do something with the related <Input>-Tags:
<div class="combobox-placeholder" id="jsgrid_combobox" style="left: 27px; top: 32px; width: 117px; height: 29px; border-top-color: currentColor; border-right-color: currentColor; border-bottom-color: currentColor; border-left-color:
currentColor; border-top-width: 0px; border-right-width: 0px; border-bottom-width: 0px; border-left-width: 0px; border-top-style: none; border-right-style: none; border-bottom-style: none; border-left-style: none; visibility: inherit; ; direction: ltr; min-width:
117px; background-color: transparent;">
<input class="cb-textbox " style="width: 156px; height: 25px;" dir="ltr" type="text"/><input tabindex="-1" title="Dropdown" class="combobox-img" style="height: 29px;"
dir="ltr" type="button" value="▼"/><input class="cb-textbox " style="width: 84px; height: 25px;" dir="ltr" type="text"/><input tabindex="-1" title="Dropdown"
class="combobox-img" style="height: 29px;" dir="ltr" type="button" value="▼"/>
Please have a look into it. Current Workaround for me is to have a Default-ListView in first WebPart. But then Customer has to click the Edit-Button to Change the Item in the releated EditForm. This is a Show-Stopper here!
With Best Regards,
Ronny

Hi Ronny,
According to your description, the lookup column would render incorrectly when adding more than one datasheet view in the Enterprise Wiki page.
I tested the same scenario per your post, and I got the same results as you got.
We will help to submit the issue to proper pipeline for you.
Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay.
Appreciate your time and patience.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error when connecting more than 50 users ??

I use database 8iEE & form server (9ias rel1) on different box to deploy form on the web
the error occur when user connect more than 50, but it's ok when connect to database using sqlplus
Is there someone has the same experience ?

I think this problem has been addressed and answered in this forum time and again …
Opening files or creating new files while in Full Screen Mode will cause a cursor offset in Photoshop CS4 (I don’t know if there are configurations where that does not happen, but best assume it just does); the common remedy is circling through the Screen Modes by hitting F on the keyboard three times.
Edit: The matter doesn’t seem to have made it into the FAQ, though. Maybe someone could add it there?

Export error when creating more than 2 gb file

Good day,
There is a problem with the export utility. while exporting a file size more than 2 gb an error occured.
00002- Error in writing to export file
my os is Unix 6 SCO and Orale database version is 7.1.3
knidly look into this issue.
Thanks & Regards.

SCO OpenServer 6 now provides users with 1 TeraByte file support. A TeraByte is equal to approximately 1 trillion bytes. This new feature allows SCO OpenServer 6 users to create files that are over the previous 2 gigabyte file limit in older versions of SCO OpenServer. This new feature provides greater flexibility in file size and application usage.
To showcase this new feature, we will create a file that is larger than 2+ Gigabytes. In order to accomplish this task, we will need to use SCO OpenServer 6 large filesystem-aware commands. These commands can be found in /u95/bin.
To Create a 2+ Gigabyte File:
In the KDE desktop environment, click on the UNIX icon. The UNIX terminal window will appear.
In the terminal window, type
/u95/bin/dd if=/dev/urandom of=bigfile bs=100k count=40000
Press Enter. A 4+ Gigabyte file will be created.
NOTE: This exercise will require approximately 5 minutes to complete. This test also requires approximately 5 Gigaytes of available disk space on your machine.
You have now successfully created a 2+ Gigabyte file in SCO OpenServer 6. This completes the detailed instructions for the product walkthrough. Feel free to investigate other features within SCO OpenServer 6.

How do I post a recurring problem with a report that isw more than 500 characters

Why does FFx 8.0.1 initiate a XP restart? i.e.
This is a repeat of my 1st test!! While not at the PC (12/15/11 late evening) version 8.0.x is automatically upgrading Firefox 6.0.2.. Shut down PC, restart 12/16/11 today. Run the test again using the URL below possibly a typical problem site. Select Yamax SW200 from this page. Wait about a minute plus and XP reboots etc.
http://www.pedometersusa.com/view-all-pedometers.html?gclid=CKGJl9Kp3KwCFcya7Qodomb6qw
so I run IE version 6.0.2900.55112.xpsp.0804313-2111 and use the same URL. IE sat ar this tab for more than 25 MINUTEs and THERE WAS NO Problem i.e. XP did not reboot or Blue Screen.
----------- end of repeat test of 12/16/11 -----------

If the file has to contain the images, then the file has to bear whatever weight the images contribute. The only way to get to 50K is to have the total weight of the images come in below that. If the label images are just text then you should see what you can do to draw them up as vectors in Flash. But I doubt the larger images are going to be able to be optimized down far enough to meet the spec while retaining the kind of clarity you want, especially if the 640x480 needs to be expanded to a larger full screen size.

OutOfMemoryError: Java heap space error when exporting more than 65MB file

Hi all,
My requirement is to export 65Mb file in a CSV format.There is no possibility for me to increase the heap size.
But ,I get the following error which is below the code while doing an export.
Whole 65mb ,I am putting into the response stream.I am not sure whether this is allowed or not.If not,please tell me the alternatives.
ServletOutputStream out = null;
final FacesContext faces = FacesContext.getCurrentInstance();
final HttpServletResponse response = (HttpServletResponse) faces
.getExternalContext().getResponse();
response.setContentType( "application/download" );
response.setHeader( ...................);
final byte[] byteArray = eachLine.toString().getBytes();
response.setContentLength( byteArray.length );
out.write(byteArray);
java.lang.OutOfMemoryError: Java heap space
at java.io.ByteArrayOutputStream.write(ByteArrayOutputStream.java:95)
at org.apache.myfaces.webapp.filter.ExtensionsResponseWrapper$MyServletOutputStream.write(ExtensionsResponseWrapper.java:138)
at org.ajax4jsf.io.FastBufferOutputStream.writeTo(FastBufferOutputStream.java:151)
at org.ajax4jsf.framework.ajax.xmlfilter.FilterServletResponseWrapper.sendContent(FilterServletResponseWrapper.java:469)
at org.ajax4jsf.framework.ajax.xmlfilter.BaseXMLFilter.doXmlFilter(BaseXMLFilter.java:193)
at org.ajax4jsf.framework.ajax.xmlfilter.BaseFilter.doFilter(BaseFilter.java:220)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.myfaces.webapp.filter.ExtensionsFilter.doFilter(ExtensionsFilter.java:100)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.myfaces.webapp.filter.ExtensionsFilter.doFilter(ExtensionsFilter.java:147)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
Edited by: Neelims on Apr 4, 2009 3:48 AM
Edited by: Neelims on Apr 4, 2009 3:51 AM

Hi
final byte[] byteArray = eachLine.toString().getBytes();
response.setContentLength( byteArray.length );
out.write(byteArray);
I assume eachLine is an object that holds the 100MB file contents, just release the memory held by this object before you start the writing part as shown below
final byte[] byteArray = eachLine.toString().getBytes();
eachLine=null;//removed the reference holding the memory
System.gc()//if JVM is in a good mood may be it will release some memory
response.setContentLength( byteArray.length );
out.write(byteArray);
before throwing out of memeory JVM may try to run the garbage collecter as you have initialised your object it might free up some memory

ServletInputStream error when reading more than once

I have an application which needs to look at fields in a multipart request in several different places of the code. The first time I look at the request, it works just fine, but every time after that it doesn't. Here is a simplified example of what is happening:
private ServletInputStream in;
private HttpServletRequest request;
private byte[] buff = new byte[100*1024];
public Class class1 {
    public class1(HttpServletRequest req) {
        super();
        request = req;
        in = request.getInputStream();
        String line = readLine();
        System.out.println("Testing line1: " + line);
private ServletInputStream in2;
private HttpServletRequest request;
private byte[] buff = new byte[100*1024];
public Class class2 {
    public class2(HttpServletRequest req) {
        super();
        request = req;
        in2 = request.getInputStream();
        String line = readLine();
        System.out.println("Testing line2: " + line);
}Not sure that it is relevant, but in case it is, my readLine() method looks like this:
private String readLine() throws IOException {
    int len = 0;
    String line = null;
    len = in.readLine(buff,0,buff.length);
    if(len < 0) return null;
    line = new String(buff,0,len,"ISO-8859-1");
    return line;
}The request is basically passed around so it is the same request object both times. The first one outputs the first line as expected. In the second one however, line is null.
Interestingly enough, I found the following to be true also:
private ServletInputStream in;
private ServletInputStream in2;
public Class class3 {
    public class3(HttpServletRequest request){
        super();
        in = request.getInputStream();
        if(in != null) {
            in.close();
        in = null;
        in2 = request.getInputStream();
        String line = in2.readLine();
        // IOException OCCURS HERE SAYING: Stream closed
}The stream was closed on the first "in" but not on the second, so why would I be getting this????
Help!!

I am not completely sure what to do now. Basically, I have a multipart request for a fileupload. Towards the beginning of my servlet, I need to get the form parameters. This is working fine. But since you say that the getInputStream() will return the same instance regardless of where it is called from, I am in trouble when later on in the code I need to actually upload the file. To integrate this into my core java framework, there really isn't a way that I can get all the information I need at the beginning and use it later. Is there a way I can get the form parameters WITHOUT using the inputstream? Then, my inputstream could be called in my mapper for uploading the file. I haven't found another way to do this, as multipart requests are handled differently. Any suggestions at all?

How to display TEXT more than 500 char in a report as multiple lines.

Hi Friends,
i have a requirement like i should display Texts of length more than 500 Characters in a report( ALV LIST) as multiple lines
I am fetching the data Using FM READ_TEXT
the output im currently geeting with 150 Char in lenth as a single line
How we can split the text into multiple lines in a report
first i would like to know is it possible? if possible please give your valuable suggitions if not is there any alternative way to do this task.
Thanks & regards
kumar.

Hi,
This is possible but the Solution might not look Standard/Appropriate to you.
In ALV, you can have Multiple Line Output...There is a Field in the Field Catalogue..called as Row_position...this is by default 0...which means Single row/Line ALV output....You can have this Value in the Range of 0 to 3.......A ALV field with row_position 1, will be displayed in the second line for every record...i.e. you will have multiple line for a single record of ALV.
In your case......you can use this but you need to split your field in two fields.....but you may end up spliting a single word....but for that also you can design the logic of splitting the Fiel value at SPACE only......
This may work.......and Sorry if not work......

Error when sending message: 500 Internal Server Error

Hi
IE is not accepting any messages,
when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
following things what i have noticed.
1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the IE admin) URL is "http://<host>:8000/sap/xi/engine?type=entry"
2. SICF all the XI serivess are up and running, i am able to test these service.
3. The http port is active ( SMICM )
Pls note the error is 500 Internal Server Error
regards
Nisar

I think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
1 Check Table Space is enough. ---i had installed server recently & very few interface running.
2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
Try restart the java stack(XI Server) and follwing services.
com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
regards
Nisar

Project Server 2013 : Edit "In Browser" more than 500 line throws "An unexpected error occurred" Error, something went wrong.

Dear Experts,
I have got Project Server 2013. These projects are migrated from 2007 to 2010 and to 2013. All the functionality working fine as expected, But few schedule got more than 500 lines of Task, We are unable to "Edit" those projects "In Browser".
We have tried in both IE and Chrome, When you try Edit it throws error "Something went wrong, I checked the co relation Id in the logs. I get the below,
02/09/2015 15:08:32.84
w3wp.exe (0x16D8)
0x04EC 0xB217023
ahjqp High
[Forced due to logging gap, cached @ 02/09/2015 15:08:32.70, Original Level: Verbose] SQL connection time: 0.0809460420248942
75f5e79c-783e-a090-5f32-f52e977a9b62
[Forced due to logging gap, cached @ 02/09/2015 15:08:32.85, Original Level: Verbose] The SecurityTokenServiceHeaderInfo including the correlation ID was added.
Batch request was created without a batch name, specify a batch name for better telemetry.
at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
at System.Environment.get_StackTrace()
at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.GetSqlBatchRequest(String batchName) .....
[Forced due to logging gap, cached @ 02/09/2015 15:08:33.89, Original Level: VerboseEx] PWA:, ServiceApp:Project Server Service Application...
the above error repeated more than 100 times
Same thing goes to the below error also
Entering Function=TTaskTable::GetElemProp DynamicLogging triggered SessionID = {EE8AD295-E5AD-E411-943A-005056A95E5E}
Leaving Function=TTaskTable::GetElemProp returning HRESULT:8C010003 SessionID = {EE8AD295-E5AD-E411-943A-005056A95E5E}I really appreciate and thank for
the support. Thanks
Jacob Michael

Hi Jacob,
Have you tried re-publishing the projects from MS Project and see if that helps?
500 tasks are quite a lot for the browser to deal with; I usually recommend switching to MS Project when you have that number of tasks for a project
Paul

Problems when using outlook and outlook express, cannot send more than app 100 KB.

Since app 6 weeks ago we have problems when sending pictures etc, we cannot send more than app 100KB. If we send more there is error code
Socket Error 10053, Error number 0x800CCC0F. Your server has unexpectedly terminated the connection.
I have made no changes to either computer. Restoring the laptop to Nov 2011 made no difference.We use Outlook Exlorer and Outlook.
When I take my laptop to my neighbors house, who has Time Warner, I can send 10MB files without any problems, using the EXACT same settings.
Spending over 2 hours with a very informed Verizon technician on the phone did nothing.
I first blamed our server, turns out the culprit is Verizon.
Any ideas?
Eugene

Good Morning,
Are you able to send attachments on webmail.verizon.net?
Shamika_Vz
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Error using pretrigger when capturing more than one channel

I am having problems acquiring data with pretrigger samples when capturing more than one channel, using NI-PXI-6071E hardware and Labview's Analog Input VIs (Legacy NI-DAQ).
My goal is to trigger on one signal, while capturing another. Unfortunately, I cannot use the PFI0 for external triggering, as our cables/hardware have already been built, so I must use an analog input channel as the trigger. I understand that to do so I must capture both channels, and the channel that I wish to trigger off of must be the first channel in the list.
If I trigger and capture on the same channel (tried 1-4) then it
works great, regardless of the number of pre-trigger samples set. If I
capture more than one channel (passing the trigger channel first), with no pretrigger samples set, then triggering and capturing both work fine. However, if I do the same with the pretrigger sample > 0 I get the following error:
Error -10621 occurred at AI Control. Possible reason(s):
NI-DAQ LV: The specified trigger signal cannot be assigned to the trigger resource.
I don't se any such limitation explained in the user manual, and searching the forum, I have found a few other people that had the
same
problem
but they did not have solutions. Any ideas?
Solved!
Go to Solution.

I'm sorry for double-posting this. I was trying to post it in the DAQ board and it kept ending up on the LabView board.
If moderators have the ability to delete this thread you are welcome to do so.

Error when sending more than 500 Characters

Similar Messages

Maybe you are looking for