Error when startin Teststand 4.1

Hello,
when i start TS 4.1 i get the attached error-popup "Attention: The TestStand service did not start up promptly."
This happens since i killed a process in the Taskmanager (XP SP3) which was called something like TestStandServer.exe.
What do i have to do to remove this error-popup?
Thx for your help
Attachments:
Clipboard012.jpg ‏5 KB

To OnlyOne -
The TestStand Service is installed by TestStand. TestStand uses the service to support version switching and configuring development environements like MSVC, CVI and LabVIEW to work properly with TestStand. We moved to a service to support Windows Vista better. You are seeing the prompt because TestStand engine attempts start and use the service to validate that integration with developement environments are correct. I believe that the OS is displaying the prompt, but I am not sure. If you restart you system or go into Windows Services and restart the TestStand service, you should no longer see the prompt.
I am curious, why did you kill the service in task manager in the first place, were you just trying to cleanup all TestStand processes?
Scott Richardson
National Instruments

Similar Messages

NI 5660 Driver DLL Errors when using Teststand 2010 and LabVIEW Run-Time Engine 2010

This problem seems similar to the post "Resource not found error in executable on development machine." but I didn't want to repost under that thread because I only happened upon it by chance and none of my searches brought me there... so I made a more descriptive Subject.
I am working on a system that uses a PXI Chassis with a NI 5600 Downconverter and a NI 5620 high speed digitizer, among other PXI Cards.
I inherited working code written in LabVIEW 2010, running with the LabVIEW Run-Time Engine 2010. The code was using a custom executive and my task was to rewrite the test using TestStand 2010. I reused the majority of the old code. The old code used NI-5660 to control the 5600 and 5620. When I run my sequence using the LV Development System and TestStand, it runs without any issues. When I change the adapter over to LabVIEW Run-Time Engine 2010, all of my NI5660 VIs become broken due to DLL issues. It warns that the nipxi5600u.dll was not initialized correctly. Many of the errors are associated with the NI Tuner and NI Scope. After this LabVIEW will crash randomly, and the seqeunce will not work in TestStand even when back with the LV Development Adapter. The only way to recover after this is to restart the computer - TestStand automatically reverts back to the development system, the VIs are no longer broken and the sequence works again.
I have all of my VIs associated with a project. After reading a little bit about DLLs and TestStand, I found all of the DLLs in the dependencies section of my project and added them to my TestStand workspace. I also used Dependency Walker to track down the problems with the nipxi5600u.dll, the 2 DLL files that it said were not found already existed in the same folder as the original DLL (C:\Windows\System32). I have also performed a Mass Compile to make sure everything was running in LV 2010. If I skip the steps involving the 5660, my entire sequence runs fine.
The previous code was running with the LabVIEW Run-Time Engine without any issues. Is there just a step I am missing? Has anyone seen anything like this before? I can send screenshots of errors to provide more detail if necessary.

I have tried some more things and still can't get it to work. I have added the VIs mentioned in the Notes On Creating Modulation Executables KB both to the TestStand workspace and the LabVIEW project holding all of my VIs. This did not change the results.
When I try to run my sequence, The first error I get is shown in Error 1445.bmp. This happens when I try to use the NI 5660 initialize.vi. If I click ignore, the next error I see is shown in Error -20551.bmp. When I try to open the VI to look at it, I get the 2 DLL errors shown in Error loading nipxi5600u.bmp and Error loading nidaq32.bmp. When I close TestStand, I get the error LabVIEW Fatal Error.bmp.
Attachments:
Error1445.JPG ‏164 KB
Error -20551.JPG ‏174 KB
Error loading nipxi5600u.JPG ‏9 KB

Getting the -18001 error when using TestStandLVRTS

I have developed my TestStand (v2.0) test sequences based on the LabVIEW adaptor. Everything runs well with the labVIEW development system. However, when I switch the labVIEW adaptor to the LabVIEW runtime server such as the TestStandLVRTS, I got the -18001 Error from the TSAPI with the message of "Unable to launch 'TestStandLVRTS.Application' ActiveX automation server".
I have tried all the suggested fixes described in the article "-18001 Errors When Using TestStand and LabVIEW". The error still persists.
Could you help me to solve this problem? Without this problem being solved, we will not be able to deploy our test sequences.

Hello HCL -
Below I have attached my version of the 6.1 built TestStandLVRTS folder. If you are using the build file provided in this folder when re-compiling your run time server, you should be seeing the .tlb file being auto-generated. Verify that you are using the build file that ships with TestStand and that under application settings that you have the 'Enable ActiveX server' checkbox enabled.
There are no known bugs with LabVIEW 6.1 related to problems launching the TestStandLVRTS.exe, and given the good behavior I have seen between the two products here on the test machines, I am interested in seeing first if the problem lies with the executable and then we will try and troubleshoot your particular system.
--Regards
Elaine R.
National Instruments
http://www.ni.com/ask
Attachments:
LabVIEW.zip ‏227 KB

I get an Application Error message when installing TestStand 2.0

When installing TestStand 2.0 on a Windows NT 4.0 Workstation, following message appears when installing Engine: Application Error - The instruction at "0x685876b3" referenced memory at "0x685876b3". The memory could not be read.

Hello Eduardo,
This is a strange behavior, and I guess I have a couple of comments. TestStand works fine with Windows NT 4.0 but it needs at least Service Pack 3 installed. So make sure you have the SP installed.
In addition, make sure you use an administrator account when you install TestStand. Finally, you can try to install it on a different computer with the same OS just to make sure the CD is OK. If it works in the other computer, then there is something wrong with the original PC.
Regards,
Roberto Piacentini
Applications Engineer
National Instruments
www.ni.com/support

Error when passing automation refnum to teststand variable

Hi All
I am trying to pass an automation refnum to teststand. However when i run the sequence i get the following error in the teststand variable watch i setup after the vi has run.
Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)).
The Automation open is calling an activeX which is configured to use DCOM for remote operation.
I pass the refnum as an indicator from the vi and then use a function to set the local variable in teststand.
I have also tried using the Teststand set property.vi but this will not accept the refnum as an input value even though i set the type to 'object'.
Thanks in advance for any help with this.

Hi George,
I have configured DCOM as per the Article, and disabled all firewalls but i still get the error. Attached is a set of screen shots that's shows the labview function does not error but in teststand it does.
I can also see from the Task Manager on the remote instrument that the function opens an instance of the application therefore suggesting that the DCOM is configured correctly.
Regards
Daz
Message Edited by Daz37 on 10-19-2009 03:51 AM
Attachments:
VSA_REF_Error.doc ‏119 KB

An error when calling DAQmx from TestStand

Hi,
I get very mystic error when calling DAQmx Create Channel (Digital input) and DAQmx Read (Digital Bool 1Line 1Point) vis. Difficulty is that it does not occur every time. It is random. Any ideas what might cause this error? I uninstalled Traditional DAQ drives because they are not in use but it does not help.
Please, see attachment.
BR,
Jick
Attachments:
daqerror.PNG ‏80 KB

Here is some additional information. See attachments.
I can not get that error using MAX or looping it only. There is something else outside which causes the error. It can not be Traditional DAQ because I uninstalled it. These vis are running in a loop during the test in the batchmodel.
BR,
Jick
Attachments:
daqerror2.PNG ‏33 KB
daqerror3.PNG ‏15 KB

I am trying to have some LabVIEW code called in a New thread exit when the testStand sequence terminates

I have a Sequence that launches a sequence in a New Thread that happens to launch some LabVIEW code. The problem is when the LabVIEW code finishes, it will not close even when the TestStand sequence terminates. Is there a way to tell this LabVIEW code to Exit, I've tried the Quit LabVIEW function, but that causes a C++ RunTime Error. The LabVIEW code does end though, and it is set in the VI properties to:
Checked - Show Front Panel When Called
Checked - Close Afterwardds if originally closed
The sequence call that the LabVIEW code is launched from has the following options:
- New Thread
Unchecked - Automatically wait for the thread to complete at the end of the current sequence
Unchecked - Initially Suspended
Unchecked - Use single threaded apartment
Any clues on this would be appreciated.

Hi ADL,
Everything should close correctly if you check the checkbox "Automatically wait for the thread to complete at the end of the current sequence" in the thread settings.
With it unchecked, I am seeing the behavior you are.
Gavin Fox
Systems Software
National Instruments

Why I get an error when running a sequence using the LabVIEW operator interface ?

I have a simple TestStand sequence calling LabVIEW vis that is giving me an error when I run it with the .exe version of the LabVIEW operator interface and I set TestStand to run the vis using the 8.2.1 runtime engine instead of the development adapter. I made a change in the operator interface to open a vi programatically and get the value of a control, this vi is also used in the TestStand sequence I am trying to run. Could this be causing my problem ?
Thanks

Hello Verdulken,
I have a few additional questions:
Does your application function correctly when running the LabVIEW operator interface you have created as a VI in the LabVIEW development environment (i.e. does this problem only occur when the LabVIEW operator interface is run as an executable)?
What is the error that you are receiving?
Regarding the VI that you open programmatically, do you open it in a visible manner (i.e. use the Show front panel when called option from VI Properties)?If so, do you also close this VI after it finishes (i.e. use the Close if originally closed option from VI Properties)?
Does the error occur on the step that calls this very same VI again later in the sequence?
Does your application function correctly if you use the development adapter for all of your calls?
Thank you in advance for this information,
Matt G.
National Instruments
Applications Engineering

I am getting the message error when trying to run the labwindowa/CVI adapters for debug

See attachments for error message and teststand settings. I am running testand 4.0.1
It was working before and suddenly it crash and then I am getting that error message every time
Regards
Attachments:
ErrorLoadCallback.jpg ‏32 KB
ErrorLoadCallback2.jpg ‏134 KB

It seems that something might still be corrupted or not registered properly. Have you tried running the TestStand Version Selector to re-select your current version of TestStand as the active version?
Also, you mentioned that it crashed and now things aren't working. What exactly occurred when it crashed? Was this just TestStand freezing, or did the entire system freeze or crash? Did you see an error message of any kind?
If the version selector doesn't help things, I would suggest a reinstall of TestStand (and possibly CVI, but let's start with TestStand). To clarify, we want to do an uninstall/reinstall rather than a repair, because the repair will only replace missing files. If a file is corrupted, the uninstall/reinstall should replace it.
Let us know how it goes!
Daniel E.
TestStand Product Support Engineer
National Instruments

Error when starting Adobe Form

I have an Adobe Form which works Ok in the development SAP Portal, but that, when I log in the production portal gives the following error:
Error when reinitializing the form (I guess, it's Error al reinicializar el formulario, in Spanish)
I think maybe there is something missing to transport, or some misconfiguration, but I haven't been able so far to find it...
Can someone give me a hand?
Thank you in advance,
S.

Hi,
Can you tell me when does the error message comes? Does it comes when you are trying to open the Form or when you are trying to execute it.
Please check if it is still working in the development box?
Regards,
Susanta

Report Generation Toolkit error when running exe not vi

Unknown System Error in Get Report Settings.vi->Get Current Font.vi->Excel Easy Table (str).vi->insert table and save file.vi->80x test suite.vi
1. The above is an error I get from my exe
2. I do not get this error when just running the vi.
3. On several report gen functions cohersion dots are on my refnum input. Is this the cause of my problem with the exe?
I guess there is an another learning curve when dealing with the app builder.
Any suggestions would be appreciated.
Thanks
Brian
CLAD
Brian

forget what i wrote. it was my vi.
funny, most of the time it aint LabVIEW causing the problem but the program itself.
Brian

Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem net ti

Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem next time it launches". Except that it doesn't, I keep getting the same message and the program closes. Does anyone know what I can do to repair it? Can't back up, can't do anything.

There are dozens of threads in this forum that describe the fix

Error when fetching into a variable of ROWTYPE

I came across with a vied error when creating the body of a method.
Problem:
I have a Type called Emp_typ and a corresponding table Emp_tab.
When I create the body of get method it gives the following error msg :
Compilation errors for PACKAGE BODY CHAMITH.EMP_API
Error: PLS-00386: type mismatch found at 'EMP_ROW' between FETCH cursor and INTO variables
Line: 9
Text: fetch get_emp_rec into emp_row;
Get Method body :
function get(id_ number) return emp_tab%rowtype IS
cursor get_emp_rec IS
select * from emp_tab;
emp_row emp_tab%rowtype;
begin
open get_emp_rec;
fetch get_emp_rec into emp_row;
close get_emp_rec;
return emp_row;
end;
However when I do the same without having a type upon the table emp_tab, it works fine.
Pls give me a solution for that.
Thanks,
Chamith

Hi,
Let me know the Oracle Database Version.
Regards,
Sailaja

Error when trying to access a secured web service from Forms 10g 10.1.2.3

Hello,
I'm trying to access a secured web service from Forms10g 10.1.2.3 but i'm getting the next error when pressing the button the first time:
java.rmi.RemoteException: ; nested exception is: HTTP transport error: javax.xml.soap.SOAPException:
java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 401 UnauthorizeWhen i press the button a second time i got this error:
javax.xml.rpc.soap.SOAPFaultException: The SOAP request is invalid. The required node 'Envelope' is missingThis is the code i have in my button:
DECLARE
jo ora_java.jobject;
pdfObject ora_java.jobject;
pdf     varchar2(900);
rv varchar2(100);
ex ora_java.jobject;
BEGIN
JO := SEARCHSOAPCLIENT.new;
SEARCHSOAPCLIENT.setUsername(JO,'weblogic');
SEARCHSOAPCLIENT.setPassword(JO,'welcome1');
pdfObject := SEARCHSOAPCLIENT.quicksearch(JO,'1234',NULL);
pdf := SEARCHSOAPCLIENT.tostring(pdfObject);
message(pdf);
message(' ');
EXCEPTION
WHEN ORA_JAVA.JAVA_ERROR then
message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
WHEN ORA_JAVA.EXCEPTION_THROWN then
ex := ORA_JAVA.LAST_EXCEPTION;
:error := Exception_.toString(ex);
END;When i run it from JDeveloper it works, this is a portion of java code the proxy web service has:
import oracle.webservices.transport.ClientTransport;
import oracle.webservices.OracleStub;
import javax.xml.rpc.ServiceFactory;
import javax.xml.rpc.Stub;
public class SearchSoapClient {
    private webservicesproxywebcontent.proxy.SearchSoap _port;
    public SearchSoapClient() throws Exception {
        ServiceFactory factory = ServiceFactory.newInstance();
        _port = ((webservicesproxywebcontent.proxy.Search)factory.loadService(webservicesproxywebcontent.proxy.Search.class)).getSearchSoap();
        this.setUsername("weblogic");
        this.setPassword("welcome1");
        System.out.println("callling from _port "+ _port.quickSearch("1234234", null));
     * @param args
    public static void main(String[] args) {
        try {
            webservicesproxywebcontent.proxy.SearchSoapClient myPort = new webservicesproxywebcontent.proxy.SearchSoapClient();
            System.out.println("calling " + myPort.getEndpoint());
        } catch (Exception ex) {
            ex.printStackTrace();
     * delegate all operations to the underlying implementation class.
    public QuickSearchResult quickSearch(String queryText, IdcPropertyList extraProps) throws java.rmi.RemoteException {
        return _port.quickSearch(queryText, extraProps);
    }Also the secured web service was generated from Webcenter Content 11.1.1.6 that is why it's a secured web service.
Kind Regards
Carlos

Without going into any technical discussion about the code, my first question is what JDK version was used to create this which was imported into the form? Understand that Forms 10 runs on JDK 1.4.2, so if you used any newer JDK version, likely there will be problems.

Error when creating a new Organization in Deployment Manager

I am trying to create a new Organization to an existing CRM environment and I keep getting the error below. The user deploying the new Organization has full control on all the security groups and Admin rights on the servers that Host SQL and CRM
application. The CRM environment is 2011 on Premise that has been setup for IFD.
We currently have 2 other organizations that are already in the environment, so the new org would be a third. I am more than glad to provide any firther information that I have to anyone that can help us resolve this issue. I also have a log file that I
saved after the failed creation attempt. I can provide the contents of the log file to anyoen who can help. Its too long to add here.
The section of the log file that shows the error is just above the screen shot. It looks like a deletion error. My queston is why is there an attempt at deleting anything if all I am trying to do is create a new Organization. This is not an import or
upgrade.
15:03:16| Error| System.Exception: Action Microsoft.Crm.Tools.Admin.ImportDefaultDataAction failed. ---> Microsoft.Crm.BusinessEntities.CrmObjectNotFoundException: No object matched the query: delete from [ConnectionRoleObjectTypeCodeBase]
OUTPUT DELETED.[ConnectionRoleObjectTypeCodeId], 3233
into SubscriptionTrackingDeletedObject (ObjectId, ObjectTypeCode)
where ([ConnectionRoleObjectTypeCodeId] = '952fda76-2f70-e411-bfa3-005056b10f95')

Hi All,
I am also getting similar error
Microsoft.Crm.BusinessEntities.CrmObjectNotFoundException: No object matched the query:
delete from [CustomerAddressBase]
OUTPUT DELETED.[CustomerAddressId], 1071
into SubscriptionTrackingDeletedObject (ObjectId, ObjectTypeCode)
where ([CustomerAddressId] = 'fbb57633-a54f-e411-80ca-005056947598')
I am getting this error when I am trying to delete all existing customer address and then try to create a new address for a customer.
So its a kind of blanket update to all existing one replaced with new one.
Please let me know if any one having solution to this

Error when startin Teststand 4.1

Similar Messages

Maybe you are looking for