Error when try to power on virtual machine after creating

I created the virtual machines from the virtual machine templates in the OVM server Manager console.After creating,status of the virtual machine turned to be power off. Then I tried to power on it. But it prompt error as " failed:<Exception: no server selected to run vm('/OVS/running_pool/18_Test01') mem_size=1024>".Then I check the /var/log/xend/xend.log. I can found messages of "VmError: HVM guest support is unavailable: is VT/AMD-V supported by your CPU and enabled in your BIOS?".
How should I deal with this error?
Thanks a lot,
Mary

Please check whether your box support fully virtualized guest or not beforehand.There are two main requirements for the hardware virtualization is to be enabled in a system:
1. BIOS should be setup for virtualization
go to "BIOS Setup" to enable "Virutalization Technology"
2. The CPU should support virtualization
check the keywords( "vmx" for Intel cpu "svm" for AMD cpu) from /proc/cpuinfo

Similar Messages

Hyper-V encountered an error trying to access an object on computer 'localhost' .....- When try to install new Virtual machin in win8, 64 bit

am using windows 8, 64 bit system inside VMWARE in Ubuntu 14.04 . I have intel core i3 processor.
I want to install WIndows-7 inside windows 8 as a virtual machine. SO I tried to use "HYPER V MANAGER" with elevated privilege. wHEN I TRY , NEW->VM Machine->'after some steps'-> when I press Finish I get following error,
[Window Title]
New Virtual Machine Wizard
[Main Instruction]
Hyper-V encountered an error while configuring the network on Windows7_32bit.
[Content]
Hyper-V encountered an error trying to access an object on computer 'localhost' because the object was not found. The object might have been deleted, or you might not have permission to perform the task. Verify that the Virtual Machine Management service on the computer is running. If the service is running, try to perform the task again by using Run as Administrator.
[Close]
my understand is: "we can use Hyper v, instead of Virtual box or as VMware player". I think in windows 8, hyper v server is not installed. does that is the problem? Why do we use it ?
Actually I wanna configure Kernel Debugging over Virtualized COM port. So what can I do next ? please help me...
Note: Virtual Machine Management service is running.

Hi mrCracker,
>>am using windows 8, 64 bit system inside VMWARE in Ubuntu 14.04 .
If I understand correctly , it is nested installation .
Windows Hyper-v is bare-metal hypervisor .
Please try to install win8 on real hardware then enable hyper-v to install VM .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

OVM 3: error when trying to delete a virtual machine

Hi,
I enclose below the error when trying to delete, using OVM MANAGER, a VM that has been wrongly created.
Thanks for you help.
Job Construction Phase
begin()
com.oracle.odof.exception.ObjectException: Caught during invoke method: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_2007E Find object name: (0}, class: interface com.oracle.ovm.mgr.api.virtual.VirtualMachine, returned null
Wed Mar 21 14:42:20 CET 2012
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:151)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:751)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_2007E Find object name: (0}, class: interface com.oracle.ovm.mgr.api.virtual.VirtualMachine, returned null
Wed Mar 21 14:42:20 CET 2012
at com.oracle.ovm.mgr.api.manager.OvmManagerImpl.deleteObject(OvmManagerImpl.java:393)
at com.oracle.ovm.mgr.api.manager.OvmManagerImpl.deleteObject(OvmManagerImpl.java:382)
at com.oracle.ovm.mgr.api.system.FoundryDbImpl.deleteVirtualMachine(FoundryDbImpl.java:1302)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:247)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:207)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
... 7 more
Job Aborted from server, cleaning up client.

HI,
I had this - the recommended solution was to re-install the OVM manager.

An unexpected error has been detected by HotSpot Virtual Machine:

Hi
When I upload the xml file with dubug window.
When I have debug then this message will come..
So give me a solution..
Here at below I have pasted files. in which I want to by pass the ldap..
So give me suggestion what to do with that files.
What's wrong with that file ?
Jiten
18 Oct 2007 17:02:09 0 INFO [main] security.SecurityUtil - SecurityUtil.login: Called with [email protected]; password=[C@1797795; sourceIpAddress=192.168.5.14; weblogin=false; realm=null
18 Oct 2007 17:02:09 16 INFO [main] security.SecurityUtil - login: start login: username: [email protected]
18 Oct 2007 17:02:09 125 INFO [main] BOOT - -- boot log messages -->
[BOOT] INFO: Loading OJB's properties: file:/C:/LMS/gsnx/deploy/webapp/gsnx.ear/webapp.war/WEB-INF/classes/OJB.properties
[BOOT] WARN: Can't read logging properties file using path 'OJB-logging.properties', message is:
C:\LMS\gsnx\OJB-logging.properties (The system cannot find the file specified)
Will try to load logging properties from OJB.properties file
[BOOT] INFO: Logging: Found 'log4j.properties' file, use class org.apache.ojb.broker.util.logging.Log4jLoggerImpl
[BOOT] INFO: Log4J is already configured, will not search for log4j properties file
18 Oct 2007 17:02:12 3282 INFO [main] security.SecurityUtil - SecurityUtil.login: Calling authentication with [email protected]; password=[C@1797795; realm=null
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d85c14f, pid=4032, tid=3260
# Java VM: Java HotSpot(TM) Client VM (1.5.0_11-b03 mixed mode)
# Problematic frame:
# V [jvm.dll+0x11c14f]
# An error report file with more information is saved as hs_err_pid4032.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Here :This is my login.config file..
* Copyright (c) 2003-2005 E2open Inc. All rights reserved.
* gnsx security configuration file
* Note:
* 1. At installation time, java.security file in your jre's lib/security/ directory should
* be edited add the following line (ganx.home} is the home directory of gsnx install
* login.config.url.1=file:{gsnx.home}/conf/login.config
* 2. Edit this file to replace ldap-url with the correct url for your
* LoginModule configuration.
* @version $Id: login.config,v 1.8 2006/02/04 18:38:11 vgeorge Exp $
gsnx.security.Login
* LdapLoginModule Options:
* ldap-url - LDAP connection URL, such as ldap://localhost:389
* e.g. ldap-url="ldap://192.168.31.63:389"
* dn-mask - The DN mask for user. The number 0 refers to the parameter
* number for username. If this is specified then user search is ingored.
* **This option is DEPRECATED**.
* e.g. dn-mask="cn={0},ou=People,dc=gsnx,dc=com"
* initialContextFactory - Class name of the initial context factory
* e.g. initialContextFactory="com.sun.jndi.ldap.LdapCtxFactory"
* connection-username - The DN used by the login module itself for authentication to
* the directory server.
* e.g. connection-username="uid=admin,ou=system"
* connection-password - Password that is used by the login module to authenticate
* itself to the directory server
* e.g. connection-password="password"
* connectionProtocol - The security protocol to use. This value is determined by the
* service provider. An example would be SSL.
* e.g. connectionProtocol="ldap"
* authentication - The security level to use. Its value is one of the following
* strings: "none", "simple", "strong".
* e.g. authentication="simple"
* user-search-base - the base DN for the user search
* e.g. user-search-base="ou=users,ou=system"
* user-search-pattern - filter specification how to search for the user object.
* RFC 2254 filters are allowed. For example: (uid=user1). To parameterize the value
* of the CN attribute type, specify (uid = {0}). The number 0 refers to the parameter
* number for username. This query must return exactly one object.
* e.g. user-search-pattern="uid={0}"
* user-search-scope-subtree - Directory search scope for the user (ture | false)
* ture - directory search scope is SUBTREE
* false - directory search scope is ONE-LEVEL
* e.g. user-search-scope-subtree="true"
* user-password-changepw-gsnx-handler - hander to change password
* If this handler is not specified, the change password feature will not be available
* if "com.gsnx.core.server.security.LdapLoginModule", is used the the
* option - user-password-attribute is required.
* e.g. user-password-changepw-gsnx-handler="com.gsnx.core.server.security.LdapLoginModule"
* user-password-attribute - attribute in LDAP that stores the user password
* If this is not specified, the change password feature will not be work
* when "com.gsnx.core.server.security.LdapLoginModule", is used as
* user-password-changepw-gsnx-handler
* e.g. user-password-attribute="userPassword"
* role-search-base - The base DN for the group membership search
* e.g. role-search-base="ou=groups,ou=system"
* role-name-attribute - LDAP attribute type that identifies group name attribute in the object
* returned from the group membership query. The group membership query is defined
* by the role-search-pattern parameter. Typically the group name parameter is "cn".
* e.g. role-name="cn"
* role-search-pattern - The filter specification how to search for the role object.
* RFC 2254 filters are allowed. For example: (uniqueMember = {0}). The number 0
* refers refers to the DN of the authenticated user. Note that if role membership
* for the user is defined in the member-of-like attribute (see user-role-name
* parameter) you may not need to search for group membership with the query.
* e.g. role-search-pattern="(uniqueMember={0})"
* role-search-scope-subtree - Directory search scope for the role (ture | false).
* ture - directory search scope is SUBTREE
* false - directory search scope is ONE-LEVEL
* e.g. role-search-scope-subtree="false"
* user-role-attribute - LDAP attribute type for the user group membership. Different LDAP
* schemas represent user group membership in different ways such as memberOf,
* isMemberOf, member, etc. Values of these attributes are identifiers of groups that
* a user is a member of. For example, if you have: memberOf: cn=admin,ou=groups,dc=gsnx,
* specify "memberOf" as the value for the user-role-name attribute. Be aware of the
* relationship between this parameter and group membership query. Typically
* they will return the same data.
* e.g. user-role-name="memberOf"
* ldap://ldap-qa.dev.e2open.com:389
* ldap://192.168.31.63:389
com.gsnx.core.server.security.PassthruLoginModule required
*com.gsnx.core.server.security.LdapLoginModule required
initial-context-factory="com.sun.jndi.ldap.LdapCtxFactory"
ldap-url="ldap://ldap-qa.dev.e2open.com:389"
connection-username="cn=Manager,dc=gsnx,dc=com"
connection-password="slapface"
connection-protocol="ldap"
authentication="simple"
user-search-base="dc=gsnx,dc=com"
user-search-pattern="cn={0}"
user-search-scope-subtree="true"
user-password-changepw-gsnx-handler="com.gsnx.core.server.security.PassthruLoginModule"
user-password-attribute="userPassword"
role-search-base=""
role-name-attribute=""
role-search-pattern=""
role-search-scope-subtree=""
user-role-attribute="";
This is LoginConfig.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE policy PUBLIC "-//JBoss//DTD JBOSS Security Config 3.0//EN" "http://www.jboss.org/j2ee/dtd/security_config.dtd">
<policy>

<application-policy name="gsnx.security.Login">
<authentication>

<login-module code="com.gsnx.core.server.security.PassthruLoginModule" flag="required">
<module-option name="initial-context-factory">com.sun.jndi.ldap.LdapCtxFactory
</module-option>

<module-option name="user-password-changepw-gsnx-handler">com.gsnx.core.server.security.PassthruLoginModule
</module-option>


<module-option name="ldap-url">ldap://ldap-qa.dev.e2open.com:389</module-option>
<module-option name="connection-username">cn=Manager,dc=gsnx,dc=com</module-option>
<module-option name="connection-password">slapface</module-option>
<module-option name="connection-protocol">ldap</module-option>
<module-option name="authentication">simple</module-option>
<module-option name="user-search-base">dc=gsnx,dc=com</module-option>
<module-option name="user-search-pattern">cn={0}</module-option>
<module-option name="user-search-scope-subtree">true</module-option>
<module-option name="user-password-attribute"/>
<module-option name="role-search-base"/>
<module-option name="role-name-attribute"/>
<module-option name="role-search-pattern"/>
<module-option name="role-search-scope-subtree"/>
<module-option name="user-role-attribute"/>
</login-module>
</authentication>
</application-policy>
<application-policy name="client-login">
<authentication>
<login-module code="org.jboss.security.ClientLoginModule" flag="required">
</login-module>
</authentication>
</application-policy>

<application-policy name="jbossmq">
<authentication>
<login-module code="org.jboss.security.auth.spi.DatabaseServerLoginModule" flag="required">
<module-option name="unauthenticatedIdentity">guest</module-option>
<module-option name="dsJndiName">java:/DefaultDS</module-option>
<module-option name="principalsQuery">SELECT PASSWD FROM JMS_USERS WHERE USERID=?</module-option>
<module-option name="rolesQuery">SELECT ROLEID, 'Roles' FROM JMS_ROLES WHERE USERID=?</module-option>
</login-module>
</authentication>
</application-policy>


<application-policy name="HsqlDbRealm">
<authentication>
<login-module code="org.jboss.resource.security.ConfiguredIdentityLoginModule" flag="required">
<module-option name="principal">sa</module-option>
<module-option name="userName">sa</module-option>
<module-option name="password"/>
<module-option name="managedConnectionFactoryName">jboss.jca:service=LocalTxCM,name=DefaultDS</module-option>
</login-module>
</authentication>
</application-policy>
<application-policy name="JmsXARealm">
<authentication>
<login-module code="org.jboss.resource.security.ConfiguredIdentityLoginModule" flag="required">
<module-option name="principal">guest</module-option>
<module-option name="userName">guest</module-option>
<module-option name="password">guest</module-option>
<module-option name="managedConnectionFactoryName">jboss.jca:service=TxCM,name=JmsXA</module-option>
</login-module>
</authentication>
</application-policy>

<application-policy name="jmx-console">
<authentication>
<login-module code="org.jboss.security.auth.spi.UsersRolesLoginModule" flag="required">
<module-option name="usersProperties">props/jmx-console-users.properties</module-option>
<module-option name="rolesProperties">props/jmx-console-roles.properties</module-option>
</login-module>
</authentication>
</application-policy>

<application-policy name="web-console">
<authentication>
<login-module code="org.jboss.security.auth.spi.UsersRolesLoginModule" flag="required">
<module-option name="usersProperties">web-console-users.properties</module-option>
<module-option name="rolesProperties">web-console-roles.properties</module-option>
</login-module>
</authentication>
</application-policy>

<application-policy name="JBossWS">
<authentication>
<login-module code="org.jboss.security.auth.spi.UsersRolesLoginModule" flag="required">
<module-option name="unauthenticatedIdentity">anonymous</module-option>
</login-module>
</authentication>
</application-policy>

<application-policy name="other">

<authentication>
<login-module code="org.jboss.security.auth.spi.UsersRolesLoginModule" flag="required"/>
</authentication>
</application-policy>
</policy>
This is : java.security
# This is the "master security properties file".
# In this file, various security properties are set for use by
# java.security classes. This is where users can statically register
# Cryptography Package Providers ("providers" for short). The term
# "provider" refers to a package or set of packages that supply a
# concrete implementation of a subset of the cryptography aspects of
# the Java Security API. A provider may, for example, implement one or
# more digital signature algorithms or message digest algorithms.
# Each provider must implement a subclass of the Provider class.
# To register a provider in this master security properties file,
# specify the Provider subclass name and priority in the format
# security.provider.<n>=<className>
# This declares a provider, and specifies its preference
# order n. The preference order is the order in which providers are
# searched for requested algorithms (when no specific provider is
# requested). The order is 1-based; 1 is the most preferred, followed
# by 2, and so on.
# <className> must specify the subclass of the Provider class whose
# constructor sets the values of various properties that are required
# for the Java Security API to look up the algorithms or other
# facilities implemented by the provider.
# There must be at least one provider specification in java.security.
# There is a default provider that comes standard with the JDK. It
# is called the "SUN" provider, and its Provider subclass
# named Sun appears in the sun.security.provider package. Thus, the
# "SUN" provider is registered via the following:
# security.provider.1=sun.security.provider.Sun
# (The number 1 is used for the default provider.)
# Note: Statically registered Provider subclasses are instantiated
# when the system is initialized. Providers can be dynamically
# registered instead by calls to either the addProvider or
# insertProviderAt method in the Security class.
# List of providers and their preference orders (see above):
security.provider.1=sun.security.provider.Sun
security.provider.2=sun.security.rsa.SunRsaSign
security.provider.3=com.sun.net.ssl.internal.ssl.Provider
security.provider.4=com.sun.crypto.provider.SunJCE
security.provider.5=sun.security.jgss.SunProvider
security.provider.6=com.sun.security.sasl.Provider
# Select the source of seed data for SecureRandom. By default an
# attempt is made to use the entropy gathering device specified by
# the securerandom.source property. If an exception occurs when
# accessing the URL then the traditional system/thread activity
# algorithm is used.
# On Solaris and Linux systems, if file:/dev/urandom is specified and it
# exists, a special SecureRandom implementation is activated by default.
# This "NativePRNG" reads random bytes directly from /dev/urandom.
# On Windows systems, the URLs file:/dev/random and file:/dev/urandom
# enables use of the Microsoft CryptoAPI seed functionality.
securerandom.source=file:/dev/urandom
# The entropy gathering device is described as a URL and can also
# be specified with the system property "java.security.egd". For example,
# -Djava.security.egd=file:/dev/urandom
# Specifying this system property will override the securerandom.source
# setting.
# Class to instantiate as the javax.security.auth.login.Configuration
# provider.
login.configuration.provider=com.sun.security.auth.login.ConfigFile
# Default login configuration file
login.config.url.1=C:\LMS\gsnx\core\src\conf\login.config
# Class to instantiate as the system Policy. This is the name of the class
# that will be used as the Policy object.
policy.provider=sun.security.provider.PolicyFile
# The default is to have a single system-wide policy file,
# and a policy file in the user's home directory.
policy.url.1=file:${java.home}/lib/security/java.policy
policy.url.2=file:${user.home}/.java.policy
# whether or not we expand properties in the policy file
# if this is set to false, properties (${...}) will not be expanded in policy
# files.
policy.expandProperties=true
# whether or not we allow an extra policy to be passed on the command line
# with -Djava.security.policy=somefile. Comment out this line to disable
# this feature.
policy.allowSystemProperty=true
# whether or not we look into the IdentityScope for trusted Identities
# when encountering a 1.1 signed JAR file. If the identity is found
# and is trusted, we grant it AllPermission.
policy.ignoreIdentityScope=false
# Default keystore type.
keystore.type=jks
# Class to instantiate as the system scope:
system.scope=sun.security.provider.IdentityDatabase
# List of comma-separated packages that start with or equal this string
# will cause a security exception to be thrown when
# passed to checkPackageAccess unless the
# corresponding RuntimePermission ("accessClassInPackage."+package) has
# been granted.
package.access=sun.
# List of comma-separated packages that start with or equal this string
# will cause a security exception to be thrown when
# passed to checkPackageDefinition unless the
# corresponding RuntimePermission ("defineClassInPackage."+package) has
# been granted.
# by default, no packages are restricted for definition, and none of
# the class loaders supplied with the JDK call checkPackageDefinition.
#package.definition=
# Determines whether this properties file can be appended to
# or overridden on the command line via -Djava.security.properties
security.overridePropertiesFile=true
# Determines the default key and trust manager factory algorithms for
# the javax.net.ssl package.
ssl.KeyManagerFactory.algorithm=SunX509
ssl.TrustManagerFactory.algorithm=PKIX
# Determines the default SSLSocketFactory and SSLServerSocketFactory
# provider implementations for the javax.net.ssl package. If, due to
# export and/or import regulations, the providers are not allowed to be
# replaced, changing these values will produce non-functional
# SocketFactory or ServerSocketFactory implementations.
#ssl.SocketFactory.provider=
#ssl.ServerSocketFactory.provider=
# The Java-level namelookup cache policy for successful lookups:
# any negative value: caching forever
# any positive value: the number of seconds to cache an address for
# zero: do not cache
# default value is forever (FOREVER). For security reasons, this
# caching is made forever when a security manager is set.
# NOTE: setting this to anything other than the default value can have
# serious security implications. Do not set it unless
# you are sure you are not exposed to DNS spoofing attack.
#networkaddress.cache.ttl=-1
# The Java-level namelookup cache policy for failed lookups:
# any negative value: cache forever
# any positive value: the number of seconds to cache negative lookup results
# zero: do not cache
# In some Microsoft Windows networking environments that employ
# the WINS name service in addition to DNS, name service lookups
# that fail may take a noticeably long time to return (approx. 5 seconds).
# For this reason the default caching policy is to maintain these
# results for 10 seconds.
networkaddress.cache.negative.ttl=10
# Properties to configure OCSP for certificate revocation checking
# Enable OCSP
# By default, OCSP is not used for certificate revocation checking.
# This property enables the use of OCSP when set to the value "true".
# NOTE: SocketPermission is required to connect to an OCSP responder.
# Example,
# ocsp.enable=true
# Location of the OCSP responder
# By default, the location of the OCSP responder is determined implicitly
# from the certificate being validated. This property explicitly specifies
# the location of the OCSP responder. The property is used when the
# Authority Information Access extension (defined in RFC 3280) is absent
# from the certificate or when it requires overriding.
# Example,
# ocsp.responderURL=http://ocsp.example.net:80
# Subject name of the OCSP responder's certificate
# By default, the certificate of the OCSP responder is that of the issuer
# of the certificate being validated. This property identifies the certificate
# of the OCSP responder when the default does not apply. Its value is a string
# distinguished name (defined in RFC 2253) which identifies a certificate in
# the set of certificates supplied during cert path validation. In cases where
# the subject name alone is not sufficient to uniquely identify the certificate
# then both the "ocsp.responderCertIssuerName" and
# "ocsp.responderCertSerialNumber" properties must be used instead. When this
# property is set then those two properties are ignored.
# Example,
# ocsp.responderCertSubjectName="CN=OCSP Responder, O=XYZ Corp"
# Issuer name of the OCSP responder's certificate
# By default, the certificate of the OCSP responder is that of the issuer
# of the certificate being validated. This property identifies the certificate
# of the OCSP responder when the default does not apply. Its value is a string
# distinguished name (defined in RFC 2253) which identifies a certificate in
# the set of certificates supplied during cert path validation. When this
# property is set then the "ocsp.responderCertSerialNumber" property must also
# be set. When the "ocsp.responderCertSubjectName" property is set then this
# property is ignored.
# Example,
# ocsp.responderCertIssuerName="CN=Enterprise CA, O=XYZ Corp"
# Serial number of the OCSP responder's certificate
# By default, the certificate of the OCSP responder is that of the issuer
# of the certificate being validated. This property identifies the certificate
# of the OCSP responder when the default does not apply. Its value is a string
# of hexadecimal digits (colon or space separators may be present) which
# identifies a certificate in the set of certificates supplied during cert path
# validation. When this property is set then the "ocsp.responderCertIssuerName"
# property must also be set. When the "ocsp.responderCertSubjectName" property
# is set then this property is ignored.
# Example,
# ocsp.responderCertSerialNumber=2A:FF:00

user564785 wrote:
I am trying to installl Oracle 11gR2 on VM machine with Redhat Linux 6-64bit. That is a Oracle database problem. Even though the Oracle product uses java it still represents a problem with that product (Oracle) rather than java. So you need to start with an Oracle database forum.

How to resolve this issue in windows 7 ?? "An Internal Virtual Machine error (3) has occurred. The virtual machine will reset now."

Dear Friends,
Do kindly help me out on this issues. I have installed Microsoft Virtual PC 2007 in my PC and i am trying to create an new virtual machine for several testing. I have a clean ISO image of windows 7 . I import through Captured ISO option. The system tries
to configure the OS . But during the configuration i am getting this error.
*Your PC needs to Restart.
Please hold the power button.
Error Code: 0X0000005D
Parameters:
0x03063A09
0x756E6547
0x49656E69
0x6C65746E
An Internal Virtual Machine error (3) has occured.
The virtual machine will reset now.
I have Enabled the virtualization settings in BIOS.
Kindly help me out to resolve this issue.
Base Machine Platform : Windows 7 - 32 Bit and Windows 7 - 64 Bit.
ISO Image : windows 7 - 32 bit.

Error Code: 0x0000005D: Your
CPU is not compatible.
Ref : http://www.winvistatips.com/internal-virtual-machine-error-3-has-occurred-t520964.html
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Can't Power on Virtual Machine

after import and approve the Virtual Machine Images, i can't power on the virtual machine, after i click the power on button in Ovm manager web page,
it indiates as following in log::
PowerOn VM: OVM_EL4U5_X86_HVM_10GB failed:<Exception: return=>failed:<Exception: xm create '/OVS/running_pool/OVM_EL4U5_X86_HVM_10GB/vm.cfg'=>Error: The device "hda" is already defined >> Jul 13, 2008 10:20:44 PM Error
following are the vm.cfg content:
[root@ovm-test1 OVM_EL4U5_X86_HVM_10GB]# more vm.cfg
acpi = 1
apic = 1
builder = 'hvm'
disk = ['file:/OVS/running_pool/OVM_EL4U5_X86_HVM_10GB/system.img,hda,w',
'file:/OVS/running_pool/OVM_EL4U5_X86_HVM_10GB/oracle10g_x86.img,hda,w',
',hdc:cdrom,r',
kernel = '/usr/lib/xen/boot/hvmloader'
memory = '1024'
name = 'OVM_EL4U5_X86_HVM_10GB'
on_crash = 'restart'
on_reboot = 'restart'
pae = 1
serial = 'pty'
vcpus = 2
vif = ['mac=00:1A:A0:B8:EF:F3']
vnc = 1
vncconsole = 1
vnclisten = '0.0.0.0'
vncpasswd = '******'
vncunused = 1
[root@ovm-test1 OVM_EL4U5_X86_HVM_10GB]#
following are 2 img files.
[root@ovm-test1 OVM_EL4U5_X86_HVM_10GB]# ls -l
total 28636201
-rw-r--r-- 1 root root 15364822528 Mar 24 16:24 oracle10g_x86.img
-rw-r--r-- 1 root root 78 Feb 19 11:42 README
-rw-r--r-- 1 root root 59 Mar 24 16:26 README.oracle
-rwxr-xr-x 1 root root 13958643713 Feb 19 12:49 system.img
-rw-r--r-- 1 root root 477 Jul 14 09:48 vm.cfg
-rw-r--r-- 1 root root 0 Jul 14 09:48 vm.cfg.lck
-rw-r--r-- 1 root root 459 Jul 14 07:19 vm.cfg.old
-rw-r--r-- 1 root root 536 Jul 14 07:59 vm.cfg.orig
thanks a lot!

Hi
Just alter the device from hda to hdb
eg
from
disk = ['file:/OVS/running_pool/OVM_EL4U5_X86_HVM_10GB/system.img,hda,w',
'file:/OVS/running_pool/OVM_EL4U5_X86_HVM_10GB/oracle10g_x86.img,hda,w',
',hdc:cdrom,r'......
to
disk = ['file:/OVS/running_pool/OVM_EL4U5_X86_HVM_10GB/system.img,hda,w',
'file:/OVS/running_pool/OVM_EL4U5_X86_HVM_10GB/oracle10g_x86.img,hba,w',
',hdc:cdrom,r' .......
this way you mount you system image root volume as a device [hda]
and your oracle10g image as a device [hdb]
ta

Unexpected error has been detected by HotSpot Virtual Machine

Hi all, I got this error when I am creating a new project in eclipse. And also during the compilation of the source code. (I am using Ant). Below is the log attached . Please help me. If you have further queries plz mail me to [email protected]/ [email protected]
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d6d4516, pid=2864, tid=2460
# Java VM: Java HotSpot(TM) Client VM (1.5.0_06-b05 mixed mode, sharing)
# Problematic frame:
# V [jvm.dll+0x64516]
--------------- T H R E A D ---------------
Current thread (0x00a08948): VMThread [id=2460]
siginfo: ExceptionCode=0xc0000005, writing address 0x6d6d4463
Registers:
EAX=0x180b1948, EBX=0x009daf40, ECX=0x180b194b, EDX=0x180b1978
ESP=0x02b7fb9c, EBP=0x02b7fbb0, ESI=0x6d6d4463, EDI=0x0000000c
EIP=0x6d6d4516, EFLAGS=0x00010206
Top of Stack: (sp=0x02b7fb9c)
0x02b7fb9c: 02b7fc70 180ac074 00000172 0000000c
0x02b7fbac: 180b1948 02b7fbdc 6d6d37d1 16d58c00
0x02b7fbbc: 180ac074 180ac3b0 180ac074 6d742400
0x02b7fbcc: 180ac074 180ae488 180abde8 009ef1f0
0x02b7fbdc: 02b7fd0c 6d764e20 180abde8 02b7fc70
0x02b7fbec: 02b7fc70 009ef0b0 009dacf4 6d6e35f6
0x02b7fbfc: 02b7fc70 00000001 009daca8 6d6def1c
0x02b7fc0c: 02b7fc70 00000000 009daca8 02b7fca4
Instructions: (pc=0x6d6d4516)
0x6d6d4506: 56 e8 05 e5 0a 00 59 59 8b 45 fc 8b c8 83 c9 03
0x6d6d4516: 89 0e 5f 5e 5b c9 c2 08 00 56 8b f1 83 be 24 01
Stack: [0x02b40000,0x02b80000), sp=0x02b7fb9c, free space=254k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
V [jvm.dll+0x64516]
V [jvm.dll+0x637d1]
V [jvm.dll+0xf4e20]
V [jvm.dll+0x6e9d5]
V [jvm.dll+0x5160e]
V [jvm.dll+0x6eb80]
V [jvm.dll+0x1233f7]
V [jvm.dll+0x122ec5]
V [jvm.dll+0x12306e]
V [jvm.dll+0x122dd3]
C [MSVCRT.dll+0x2a3b0]
C [kernel32.dll+0xb50b]
VM_Operation (0x0006edfc): generation collection for allocation, mode: safepoint, requested by thread 0x00357120
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x02d20770 JavaThread "Startup Progress Printer" [_thread_blocked, id=3744]
0x0312ae48 JavaThread "Worker-0" [_thread_blocked, id=4012]
0x02d0b008 JavaThread "Start Level Event Dispatcher" daemon [_thread_blocked, id=412]
0x02d299f0 JavaThread "Framework Event Dispatcher" daemon [_thread_blocked, id=2348]
0x02d11668 JavaThread "State Data Manager" daemon [_thread_blocked, id=3936]
0x00a0f790 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=932]
0x00a0e360 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2812]
0x00a0d648 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=3184]
0x009e86c0 JavaThread "Finalizer" daemon [_thread_blocked, id=3328]
0x009e7278 JavaThread "Reference Handler" daemon [_thread_blocked, id=1800]
0x00357120 JavaThread "main" [_thread_blocked, id=3712]
Other Threads:
=>0x00a08948 VMThread [id=2460]
0x00a109a8 WatcherThread [id=720]
VM state:at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: ([mutex/lock_event])
[0x003567d8/0x0000071c] Threads_lock - owner thread: 0x00a08948
[0x00356958/0x000006e0] Heap_lock - owner thread: 0x00357120
Heap
def new generation total 2880K, used 2830K [0x16a70000, 0x16d80000, 0x17e20000)
eden space 2624K, 100% used [0x16a70000, 0x16d00000, 0x16d00000)
from space 256K, 80% used [0x16d40000, 0x16d73940, 0x16d80000)
to space 256K, 65% used [0x16d00000, 0x16d29f00, 0x16d40000)
tenured generation total 37824K, used 2630K [0x17e20000, 0x1a310000, 0x26a70000)
the space 37824K, 6% used [0x17e20000, 0x180b1978, 0x180b1a00, 0x1a310000)
compacting perm gen total 8448K, used 8280K [0x26a70000, 0x272b0000, 0x2aa70000)
the space 8448K, 98% used [0x26a70000, 0x27286208, 0x27286400, 0x272b0000)
ro space 8192K, 63% used [0x2aa70000, 0x2af7b178, 0x2af7b200, 0x2b270000)
rw space 12288K, 46% used [0x2b270000, 0x2b809fa8, 0x2b80a000, 0x2be70000)
Dynamic libraries:
0x00400000 - 0x0040c000      c:\winnt\system32\javaw.exe
0x7c900000 - 0x7c9b0000      C:\WINNT\system32\ntdll.dll
0x7c800000 - 0x7c8f4000      C:\WINNT\system32\kernel32.dll
0x77dd0000 - 0x77e6b000      C:\WINNT\system32\ADVAPI32.dll
0x77e70000 - 0x77f01000      C:\WINNT\system32\RPCRT4.dll
0x77d40000 - 0x77dd0000      C:\WINNT\system32\USER32.dll
0x77f10000 - 0x77f57000      C:\WINNT\system32\GDI32.dll
0x77c10000 - 0x77c68000      C:\WINNT\system32\MSVCRT.dll
0x6d670000 - 0x6d804000      C:\Program Files\Java\jre1.5.0_06\bin\client\jvm.dll
0x76b40000 - 0x76b6d000      c:\winnt\system32\WINMM.dll
0x6d280000 - 0x6d288000      C:\Program Files\Java\jre1.5.0_06\bin\hpi.dll
0x76bf0000 - 0x76bfb000      c:\winnt\system32\PSAPI.DLL
0x6d640000 - 0x6d64c000      C:\Program Files\Java\jre1.5.0_06\bin\verify.dll
0x6d300000 - 0x6d31d000      C:\Program Files\Java\jre1.5.0_06\bin\java.dll
0x6d660000 - 0x6d66f000      C:\Program Files\Java\jre1.5.0_06\bin\zip.dll
0x6d4c0000 - 0x6d4d3000      C:\Program Files\Java\jre1.5.0_06\bin\net.dll
0x71ab0000 - 0x71ac7000      c:\winnt\system32\WS2_32.dll
0x71aa0000 - 0x71aa8000      c:\winnt\system32\WS2HELP.dll
0x6d4e0000 - 0x6d4e9000      C:\Program Files\Java\jre1.5.0_06\bin\nio.dll
0x10000000 - 0x10052000      D:\eclipse-3.2\eclipse\configuration\org.eclipse.osgi\bundles\79\1\.cp\swt-win32-3235.dll
0x774e0000 - 0x7761d000      C:\WINNT\system32\ole32.dll
0x773d0000 - 0x774d2000      C:\WINNT\WinSxS\X86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\COMCTL32.dll
0x77f60000 - 0x77fd6000      C:\WINNT\system32\SHLWAPI.dll
0x763b0000 - 0x763f9000      C:\WINNT\system32\comdlg32.dll
0x7c9c0000 - 0x7d1d5000      C:\WINNT\system32\SHELL32.dll
0x77120000 - 0x771ac000      C:\WINNT\system32\OLEAUT32.dll
0x76390000 - 0x763ad000      c:\winnt\system32\IMM32.dll
0x74d90000 - 0x74dfb000      c:\winnt\system32\USP10.dll
0x771b0000 - 0x77256000      C:\WINNT\system32\WININET.dll
0x77a80000 - 0x77b14000      C:\WINNT\system32\CRYPT32.dll
0x77b20000 - 0x77b32000      C:\WINNT\system32\MSASN1.dll
0x75a70000 - 0x75a91000      c:\winnt\system32\MSVFW32.dll
0x5d090000 - 0x5d127000      C:\WINNT\system32\comctl32.dll
0x5ad70000 - 0x5ada8000      C:\WINNT\system32\uxtheme.dll
0x74720000 - 0x7476b000      C:\WINNT\system32\MSCTF.dll
0x605d0000 - 0x605d9000      C:\WINNT\system32\mslbui.dll
VM Arguments:
jvm_args: -Xms40m -Xmx256m
java_command: D:\eclipse-3.2\eclipse\startup.jar -os win32 -ws win32 -arch x86 -launcher D:\eclipse-3.2\eclipse\eclipse.exe -name Eclipse -showsplash 600 -exitdata a98_74 -vm c:\winnt\system32\javaw.exe -vmargs -Xms40m -Xmx256m -jar D:\eclipse-3.2\eclipse\startup.jar
Launcher Type: SUN_STANDARD
Environment Variables:
JAVA_HOME=C:\Program Files\Java\jdk1.5.0_06
CLASSPATH=.;D:\proj-R;D:\Tomcat5\apache-tomcat-5.5.15\common\lib\servlet-api.jar;D:\Tomcat5\apache-tomcat-5.5.15\common\lib\jsp-api.jar;
PATH=C:\sybase\ODBC;C:\sybase\OCS-12_5\lib3p;C:\sybase\OCS-12_5\dll;C:\sybase\OCS-12_5\bin;C:\sybase\JS-12_5\bin;C:\sybase\ASE-12_5\dll;C:\sybase\ASE-12_5\bin;C:\cygwin_root\usr\local\bin;C:\cygwin_root\bin;C:\cygwin_root\bin;C:\cygwin_root\usr\X11R6\bin;c:\Program C:\sybase\ODBC;C:\sybase\OCS-12_5\lib3p;C:\sybase\OCS-12_5\dll;C:\sybase\OCS-12_5\bin;C:\sybase\JS-12_5\bin;C:\sybase\ASE-12_5\dll;C:\sybase\ASE-12_5\bin;C:\cygwin_root\usr\local\bin;C:\cygwin_root\bin;C:\cygwin_root\bin;C:\cygwin_root\usr\X11R6\bin;c:\Program Files\Perforce;c:\winnt\system32;C:\Program Files\Java\jdk1.5.0_06\bin;C:\cygwin_root\lib\lapack;C:\usr\tools\trunks\bin;C:\usr\Misc\util;C:\Program Files\Java\jdk1.5.0_06;.;D:\Programme\perl\5.00503\bin;D:\Programme\perl\5.00503\bin\MSWin32-x86;D:\Programme\perl580\bin;D:\Softwares\quartz\quartz-all-1.6.0.jar;C:\Program Files\Java\jdk1.5.0_06;.;D:\Programme\perl\5.00503\bin;D:\Programme\perl\5.00503\bin\MSWin32-x86;D:\Programme\perl580\bin;D:\Softwares\quartz\quartz-1.6.0.jar;D:\Softwares\ejb\j2ee.jar;
USERNAME=ramesh
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 6 Model 6 Stepping 2, AuthenticAMD
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 2
CPU:total 1 family 6, cmov, cx8, fxsr, mmx, sse
Memory: 4k page, physical 1564144k(936720k free), swap 1926284k(1373344k free)
vm_info: Java HotSpot(TM) Client VM (1.5.0_06-b05) for windows-x86, built on Nov 10 2005 11:12:14 by "java_re" with MS VC++ 6.0

Hi. There is nothing in even the most homicidal Java code
that can cause such an error. It is only native code that
can do it, and the two main suspects here are the JVM
itself or the OCI client libraries used by the Oracle driver
when connecting in the OCI/type-2 mode. Neither the
JVM author or Oracle will be lightly entrained in an effort
to debug it (C code is hard), unless you can provide a
small reliable reproducer program.
I highly recommend an alternative, that you switch to
using the driver in the all-Java/type-4/thin mode. It will
be much more reliable in this regard, and nowadays, the
thin driver can be toled to use the tnsnames.ora file for
connectivity info, so you can retain any administration
value/custom that uses those files.
Please say if there are any other reasons you can't do
that, and if so, the first steps would be to upgrade to the
latest OCI client and latest JVM, to see if the problem has
been fixed already.
Good Luck,
Joe Weinstein at BEA Systems

Error has been detected by HotSpot Virtual Machine EXCEPTION_FLT_DIVIDE_BY_

Hi everyone,
i've got this error
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_FLT_DIVIDE_BY_ZERO (0xc000008e) at pc=0x00bda829,
pid=1608, tid=1232
when i trying to use variables with type double or float.
for example:
public class AverageFruit {
public static void main(String[] args) {
// Declare and initialize three variables
double numOranges = 50.0E-1; // Initial value is 5.0
double numApples = 1.0E1; // Initial value is 10.0
double averageFruit = 0.0;
averageFruit = (numOranges + numApples)/2.0;
System.out.println("A totally fruity program");
System.out.println("Average fruit is " + averageFruit);
}

I don't see anything wrong with the code and I even compiled and ran it with 1.4.2_09 and got the following output:
> java AverageFruit
A totally fruity program
Average fruit is 7.5What JRE version are you using?

LLVM ERROR: Error: Unable to launch the Java Virtual Machine

Having expanded the kit and followed directions to compile the samples
On Windows 7, the complaint is
     LLVM ERROR: Error: Unable to launch the Java Virtual Machine.
I have about a dozen JVMs installed, the default is 64 bit java 1.8_05
make FLASCC="/cygdrive/c/crossbridge/sdk" FLEX="C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\sdks\4.6.0"
make[2]: Entering directory `/cygdrive/c/crossbridge/samples/01_HelloWorld'
-------- Sample 1 --------
First let's compile it as a projector:
"/cygdrive/c/crossbridge/sdk/usr/bin/gcc" -Werror -Wno-write-strings -Wno-trigraphs hello.c -o hello.exe
cc1: error in backend: Failed to run /cygdrive/c/crossbridge/sdk/usr/bin/../../usr/bin/llc with args: -jvm=C:\windows\sy
stem32\java -filetype=obj C:\crossbridge\cygwin\tmp\ccb4oprU.o -o C:\crossbridge\cygwin\tmp\ccb4oprU.o -jvmopt -Xmx1500M
Error:
LLVM ERROR: Error: Unable to launch the Java Virtual Machine.
This usually means you have a 32bit JVM installed or have set your Java heap size too large.
Try lowering the Java heap size by passing "-jvmopt=-Xmx1G" to gcc/g++.
Stack dump:
0.      Program arguments: C:\crossbridge\sdk\usr\bin\llc.exe -jvm=C:\windows\system32\java -filetype=obj C:\crossbridge
\cygwin\tmp\ccb4oprU.o -o C:\crossbridge\cygwin\tmp\ccb4oprU.o -jvmopt -Xmx1500M
1.      Running pass 'Function Pass Manager' on module 'C:\crossbridge\cygwin\tmp\ccb4oprU.o'.

After the above, the "samples" build still failed on sample 5.
My explanation is that my typical devlopers path is full of all kinds of stuff, including perl,
msvc, some version or other of cygwin, some random unix command tools, and so on.
I eventually fixed the rest of the samples build process by cleaning up my path.
In run.bat, before the path modification
# set a minimal path to avoid contamination of the environment with unexpected programs
# note this includes the JDK path we want to use
set path=C:\java\jdk1.8.0\bin;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;

Ubuntu-Oracle:An unexpected error has been detected by HotSpot Virtual Machine

OS : Ubuntu 12.04.2 LTS
ORACLE:
linux_11gR2_database_1of2.zip
linux_11gR2_database_2of2.zip
when I run the command 'netac' to set the listener , it reports the error.Did anyone suffer from the problem.Help me,thanks!
Oracle Net Services Configuration:
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0xa280975e, pid=9226, tid=3075516096
# Java VM: Java HotSpot(TM) Server VM (1.5.0_17-b02 mixed mode)
# Problematic frame:
# C [libclntsh.so.11.1+0x42975e] snlinGetAddrInfo+0x1b2
# An error report file with more information is saved as hs_err_pid9226.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Aborted (core dumped)

23af2318-5604-4fb7-8785-0510ec6b53b6 wrote:
OS : Ubuntu 12.04.2 LTS
ORACLE:
linux_11gR2_database_1of2.zip
linux_11gR2_database_2of2.zip
when I run the command 'netac' to set the listener , it reports the error.Did anyone suffer from the problem.Help me,thanks!
Oracle Net Services Configuration:
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0xa280975e, pid=9226, tid=3075516096
# Java VM: Java HotSpot(TM) Server VM (1.5.0_17-b02 mixed mode)
# Problematic frame:
# C [libclntsh.so.11.1+0x42975e] snlinGetAddrInfo+0x1b2
# An error report file with more information is saved as hs_err_pid9226.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Aborted (core dumped)
Oracle products are not certified to run on Ubuntu. Please see the fine Installation Guide at Oracle Database Preinstallation Requirements where you will find listed the supported versions of Linux.

"A critical error has occurred while running the virtual machine and the machine execution has been stopped"

I have the following error:
"A critical error has occurred while running the virtual machine and the machine execution has been stopped"
When I am installing grid clusterware and when is copying files from one node to other I received that virtualbox error and is stop working.
Can somebody give me any hint how to solve it ?
Thank you
Eugen

I think that is not a Clusterware issue, The clusterware installation may generating a high load on your machine and Virtual Box is not supporting.
Check vbox.log file to identify root cause.

Getting error when try to upload xml file into Data Template

Hi,
Getting error when try to upload xml file into Data Template.error:"The uploaded file XXSLARPT.xml is invalid. The file should be in XML-DATA-TEMPLATE format."Plz anybody help me.
Thanks,
Prasad.

Hi,
Anybody Help Plzzzzzz.
thx,
Prasad

Ipod shuffle 1GB Re: how to resurrect a dead shuffle? Nov 5, 2008 4:42 AM (in response to Ipod shuffle 1GB) there is no sound cant find in Itunes not in showing in drive's list please tell me how to restore or reset red light showing when try to power on

Ipod shuffle 1GB
Re: how to resurrect a dead shuffle?
Nov 5, 2008 4:42 AM (in response to Ipod shuffle 1GB)
there is no sound cant find in Itunes not in showing in drive's list please tell me how to restore or reset red light showing when try to power on or conect with USB....
If you can plz help to fiX it
thanx
intel pc , Windows 7, core 2 Dule Core

Here is the answer: go to http://support.apple.com In the search box at the top left type in the number 304996 and hit enter. This will bring you to a page with 4 solutions. Click on solution number 1 and follow the instructions. This should fix it.
bigdogdan

MBP "System Profile" error when try read "Logs" and long time blue screen

MBP "System Profile" error when try to read "Logs" and it takes long time blue screen at startup.
This happened all time when I open the "System Profiler" application and then select the option "Log", then the system crashed again over and over. The system was reinstalled clean but the error occurs again, without any third party application installed.
Here is the error:
Sun Jun 22 20:13:47 2008
panic(cpu 0 caller 0x001A8CD4): Kernel trap at 0x007efc12, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x013ab000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x045ce1e0, ECX: 0x05782c64, EDX: 0x00010001
CR2: 0x00000000, EBP: 0x344d3ca8, ESI: 0x046ad5c0, EDI: 0x046a8040
EFL: 0x00010206, EIP: 0x007efc12, CS: 0x00000008, DS: 0x00010010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x344d3ab8 : 0x12b0fa (0x459294 0x344d3aec 0x133243 0x0)
0x344d3b08 : 0x1a8cd4 (0x4627fc 0x7efc12 0xe 0x461fac)
0x344d3be8 : 0x19ede5 (0x344d3c00 0x206 0x344d3ca8 0x7efc12)
0x344d3bf8 : 0x7efc12 (0xe 0x48 0x10 0x3e0010)
0x344d3ca8 : 0x3ef261 (0x45ce1e0 0x46a2c40 0x49a7a4 0x0)
0x344d3ce8 : 0x40abe6 (0x46a8040 0x46a2c40 0x344d3d28 0x3eeac0)
0x344d3d08 : 0x40e4fb (0x46aec00 0x46a2c40 0x46aec04 0x46aec00)
0x344d3d28 : 0x43ab14 (0x46aec00 0x46a2c40 0x600000 0x19c8d1)
0x344d3d78 : 0x18801e (0x46aec00 0x4a5e5ac 0x4a5e5c0 0x11d975)
0x344d3db8 : 0x12d17e (0x450adac 0x4a5e590 0x0 0x0)
0x344d3df8 : 0x126257 (0x450ad00 0x0 0x18 0x344d3ee4)
0x344d3f08 : 0x1973dd (0x344d3f44 0x0 0x0 0x0)
0x344d3fc8 : 0x19f3b3 (0x479fee0 0x0 0x10 0x0)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff1c8
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOFireWireIP(1.7.1)@0x7ea000->0x7f2fff
dependency: com.apple.iokit.IOFireWireFamily(3.4.4)@0x6ed000
dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0x5d1000
BSD process name corresponding to current thread: ioreg
Mac OS version:
9D34
Kernel version:
Darwin Kernel Version 9.3.0: Fri May 23 00:49:16 PDT 2008; root:xnu-1228.5.18~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
This is the System Config:
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB
Graphics: GeForce 8600M GT, GeForce 8600M GT, spdisplayspciedevice, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.3.5
Bluetooth: Version 2.1.0f17, 2 service, 1 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: FUJITSU MHW2160BHPL, 149.05 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, Apple Inc., high_speed, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, full_speed, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., low_speed, 500 mA

Hello @larrycarol99,
I understand that after upgrading your computer when you plug in an ethernet cord you get a hardware malfunction error. I am providing you with a Microsoft Support document: Hardware Malfunction Results in System Error Message that explains what causes that error and provides steps on fixing it. I am also including a link to the Compaq Presario 5300US Desktop PC Drivers page, which unfortunately does not have any drivers for your computer running Windows Vista.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Designer Workflow SharePoint 2013 error when try to assign a task forbidden

designer Workflow SharePoint 2013 error when try to assign a task
Next attempt scheduled in less than one minute. Details of last request: HTTP Forbidden to http://oursite/_vti_bin/client.svc/web/lists/getbyid(guid'3cd5739e-f243-4b75-a724-fdbee704913f')/ContentTypes
Correlation Id: 56baaedd-a2d1-4377-9277-89d20cbdf434
and then after cancel I get
RequestorId: da9fe991-f8d5-7f4a-7dc2-fec198a2a115. Details: System.ApplicationException: HTTP 403 {"x-ms-diagnostics":["30000000; reason=SSL is required"],"SPRequestGuid":["000515ef-1d97-4d94-a35e-f0423f2f5eaa"],"request-id":["000515ef-1d97-4d94-a35e-f0423f2f5eaa"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["151"],"SPIisLatency":["0"],"MicrosoftSharePointTeamServices":["15.0.0.4551"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Wed, 15 Jan 2014 17:49:27 GMT"],"Server":["Microsoft-IIS\/8.0"],"X-Powered-By":["ASP.NET"]} at
Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi Amit,
According to your description, my understanding is that the error occurred when you assigned a task.
Did you install any CU for SharePoint?
If yes, after an update has been performed, several Windows PowerShell cmdlets must be run in order to maintain the connection between the SharePoint Server 2013 farm and the Workflow Manager farm.
$credential = [System.Net.CredentialCache]::DefaultNetworkCredentials
$site = Get-SPSite(<siteUri>)
$proxy = Get-SPWorkflowServiceApplicationProxy
$svcAddress = $proxy.GetWorkflowServiceAddress($site)
Copy-SPActivitiesToWorkflowService -WorkflowServiceAddress $svcAddress -Credential $credential -Force $true
After running the command, re-register the workflow service to see if the issue still occurs.
Register-SPWorkflowService: http://technet.microsoft.com/en-us/library/jj663115.aspx
More information are provided in the link below:
http://technet.microsoft.com/en-us/library/dn133867.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error when try to power on virtual machine after creating

Similar Messages

Maybe you are looking for