Error while broadcasting report to few users only!!

Hello everybody,
                            We have a report which is scheduled for broadcasting to all users daily.Report data is hierarchy based.
But, for few users report does not go, in  RSRD_BROADCAST_LOG we found following warning i.e. message with YELLOW signal light
'<userid> not usable for Jobstep'.
What is mean by this warning and how to correct it?
I have checked the user profile, his email id is correct and the Comm.Meth is 'INT E-Mail'.
Regards,
Priyanka Joshi

Hi Priyanka,
Just a guess, check a user type for the user for which system shows warning .. I think it will be other than "Dialog". It could be background,communication and some other type. This types of users are  not meant for receiving broadcasting .
Try to change the user type to "Dialog" and it should go through.
Hope that helps.
Regards
Mr Kapadia

Similar Messages

  • Error while scheduling report for SAP users

    Hi All,
    We have SAP authentication enabled in our BO environment. (BO XI 3.1 sp2 FP 2.6 on windows 2003 server).
    There are some webi reports based on BW Bex queries that we are trying to run on behalf of certain SAP end users. This we are doing using "schedule for" option.
    Now what is happening here is if the end user has logged in once in BO system ,it runs fine. But in case user has not logged in to BO (using infoview etc.) ,it throws error saying "incomplete logon data" . Also if user changes or reset his password in BW and if he doesn't login to infoview after that ,system throws another error "Name or password incorrect (repeat logon)".
    Based on these observation, we are suspecting if BO system uses stored SAP users credentials while scheduling report for them based on their last login.
    Would like to mention here that we have checked option "automatically import users".
    Please advice if this behavior is normal or we are missing some setting.
    Thanks in advance,
    Chandra

    Hi All,
    Any pointers or suggestions for this issue ??
    Is there a setting/option avialable in CMC which could resolve these errors.
    Or, user has to login once to infoview in all circumstances to avoid these errors.
    Thanks,
    Chandra

  • Error while opening report in Infoview

    I am getting following error while opening report in Infoview.
    Following is error generated in tomcat,
    com.businessobjects.rebean.wi.ServerException: Cannot open document. Error during import. (DX0005)
         at com.businessobjects.rebean.fc.internal.platformspecific.xml.ras21.SAXHandlerERRORS$SAXHandlerERROR.initElement(SAXHandlerERRORS.java:108)
         at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:187)
         at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:202)
         at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:202)
         at org.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown Source)
         at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source)
         at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
         at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
         at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
         at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
         at javax.xml.parsers.SAXParser.parse(Unknown Source)
         at com.businessobjects.rebean.fc.internal.ras21.XMLviaRAS21Decode.openDocument(XMLviaRAS21Decode.java:537)
         at com.businessobjects.rebean.fc.internal.ras21.RAS21DocumentComAdapter.openDocument(RAS21DocumentComAdapter.java:69)
         at com.businessobjects.rebean.fc.internal.ras21.RAS21ReportEngineComAdapter.openDocument(RAS21ReportEngineComAdapter.java:100)
         at com.businessobjects.rebean.fc.internal.ReportEngineImpl.openDocument(ReportEngineImpl.java:249)
         at org.apache.jsp.viewers.cdz_005fadv.viewCDZDocument_jsp._jspService(viewCDZDocument_jsp.java:267)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Thread.java:534)
    Caused by: java.lang.Exception: Cannot open document. Error during import. (DX0005) (80043746)
         at com.businessobjects.rebean.fc.internal.platformspecific.xml.ras21.SAXHandlerERRORS$SAXHandlerERROR.initElement(SAXHandlerERRORS.java:100)
    Please help me to resolve the above problem
    Reagrds,
    Ramesh

    Hi Ramesh,
    It may seem like a lot of information, but from a debugging perspective it doesn't tell us much.
    You need to give some more info and even then it would probably be a good idea to call support.
    Can you tell us;
    Which version are you on?
    Can you open de document from another desktop intelligence machine, not only the one that it was built on?
    - This checks ; you can import the document; the structure of the document is fine (not corrupted).
    Can you refresh the document on that other machine?
    - This check ; the link to the universe is fine, the universe can be imported, the connection to the database is fine.
    What is your preference as a BOE user to view Deski documents?
    - Try a few others, so you know if the problem is with one type only (and which).
    Now you will have a few more pointers more as to where the problem lies.
    Even then it can be sheer size of the document, complexity of it, etc.
    Good luck,
    Marianne

  • Error while instantiating report Z_RD_ABSENCE_REPORT

    Hi Guys,
    we have just patched BWD, and while testing the broadcast setting i came across the following error.
    Error while instantiating report Z_RD_ABSENCE_REPORT 
    Notification Number RSBOLAP 014 
    I am opening report designer and when i publish via Bex Broadcaster this message is shown. I have checked SDN and sap market place but most of the soultion seem to focus on WAD.
    My feeling is that it is a JAVA error and is somethng basis might be able to fix.
    Please can anyone let me know if they have come across this problem before, and help would be much appriciated.
    Thanks
    Forhad

    Hello Forhad,
    RSBOLAP 014 is a issue regarding communication between ABAP (backend ) VS BI Java side.
    Read the note 937697 and follow his manual instructions.
    This note will start the BI Diagnostics. There you will see a red mark with RSBOLAP issue. COrrect this red mark following the recommendation on "Action" field.
    Good luck.
    Edward S. John

  • Broadcast Error while broadcasting a template

    hi...
    I am facing error while broadcasting a template as a PDF file.
    Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
    I cant find any other details for this error.
    I am able to broadcast the query.But i am not able to broadcast the template which includes the same query.
    When i tried to assign a different query to thesame template, its working.It means that template is working fine.
    The problem is the combination of the actaul query and actual template is not working.
    I also checked with the support desktool and the configuration settings which are fine.
    There are no error logs found. When we execute the template for broadcast it should initially communicate with the BW system and then from there we wil recieve mail.
    But here when i am executing i am not able to see any logs in BW syetem, the report is not getting communicated with the BW system.
    There are 4 queries with their corresponding templates for which templates are not getting broadcasted. The queries are designed for top n customers. These queries have offsets and also for one of the query there are exit variables.
    I want to know that is there any problem with the query or some setting problem which will make the combination of query and template work properly  i.e broadcasted properly.
    Can anyone please provide some inputs????

    this seems that the Portal engine set up with your companys portal and Web application designer is not working...
    u mighte need toa pply OSS notes.
    have you checked it on SAP service market place.

  • RWI 00236 error while opening report in PDF mode

    Hi All,
    I'm getting the RWI 00236 error while the report is opened in PDF mode.I have searched on this error but couldn't got the answer so far.My report is quite a large one and i wont get any error while running simple reps.If this is something to do with temp files deletion at server side ,pls let me know which temp files needs to be deleted bcoz there quite few temp files at server level.Ofter getting this error msg ,the report browser hangs up and i needs to logout completely from infoview.
    Im using BO X1r2 version and service pack is SP4.

    Hi,
    Are you able to open other reports in PDF Mode or not
    If you are not able to open any report in PDF format then try to follow  below mentioned steps.
    1. Open Adobe Acrobat Reader. Click Edit > Preferences.
    2. Click Internet in the Categories column of the Preferences property sheet.
    3. Choose Display PDF in browser check box as shown below.
    4. Click Ok, Adobe will reconfigure the setting, close Reader.
    5. Now, when we view in pdf format in IE, we might see one  message
    6. So, when IE is launched, go to Tools>Manage Add-ons>Enable or Disable Add-ons and then enable
    "Adobe PDF Reader Link Helper" add-on. Click Ok, restart IE.
    Cheers,
    Suresh Aluri.

  • Error while generating report in RAR

    Hello,
    We are getting error while generating reports in RAR.
    RAR runs sucessfully, can see there are risk, but we cannot dowload those file, usally we use to get zip file.
    or cannot see details ,
    gives error cannt be displayed.
    Thanks,
    DK

    Hello,
    we had same issues, this happed because the disk was full.
    Please check with your basis team if the disk is full.
    Thanks,
    Prasant

  • Failed to commit objects to server. Error while publishing reports from BW

    Hi,
    I am getting below error while publishing reports from BW to BO.
    "0000000001 Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : #Duplicate object name in the same folder."
    Anyone having any solution for this. Thanks in advance.

    Hi Amit
    It would be great if you could add a little info about how you solved this issue. Others might run into similar situations - I just did:-(
    Thank you:-)

  • Error while displaying report

    I am getting following error while displaying report in sap business one-
    <b>Internal error (-101) occured [Message 131-183]</b>
    I tried resintalling sap but it did not solved the problem.The reports are getting displayed on other pc's but not on my pc.

    Hi Yogesh,
           I haven't installed any patch on my client machine.
                                                                                    Regards,
                                                                                    Dilip Kumbhar

  • Timeout error while running Report

    Hi
    All,
    Windows 2000
    Oracle Report builder 10g
    Oracle developer suite 10g
    when I had OLD computer i was able to run report more than 10 minutes. Now, I got NEW computer and i am getting TIMEOUT error while running report more than 10 minutes.
    Any clue?
    Thanks,
    Vishal

    As Fs says it depends on how you're running the report.
    If you're running via a server then you need to make the change on that server or amend the URL you are using to run the report to add the enginereponsetimeout parameter.
    You can amend this parameter on the server either by using the Application Server Control as I described in my last post or by directly editing the config file. This file will be called <reportservername>.conf and can be found in the oracle_home/reports/conf directory.
    In this file look for the engine tag and see if the engineResponseTimeOut property is set.
    E.g:
    <engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="20" callbackTimeOut="90000" engineResponseTimeOut="5">
    </engine>
    This value is in minutes so increase to a time larger than that it takes to run the report.
    If instead you're running the report via Report Builder on your own PC then look for a file called rwbuilder.conf in the same location on your PC and make the same change as described above.
    If this property isn't in the file then the engine isn't supposed to time out at all so the problem may well be something different. But to discount it try setting to a large value like 30.

  • Error while executing report in query designer

    Dear Folks,
    I am geting following error while executing report in query designer.
    Error:500 E
    an exception raised because of 0analysis pattern.
    Hence,i am unable to execute any report.
    Need help.
    Thanks

    Hi Kitu G,
    I think this is something to do with the bex web 0ANALYSIS* objects not being installed in your BW system.
    I would try and do the following:
    - Goto RSA1 > BI Content > BEx Web Template (BTMP)
    - Then double-click on Select Object.
    - Highlight all objects that start with 0ANALYSIS_PATTERN
    - Click on Transfer Selections, and then Install.
    If you can't do the above in prd, do it in DEV, then transport the objects to prd.
    After all this, try re-running your queries.
    Any questions/clarification just let me know
    Cheers.
    Darwin

  • Error while running report 10g

    DECLARE
         repid REPORT_OBJECT;
         v_rep VARCHAR2(1000);
    rep_status VARCHAR2(2000);
    BEGIN      
         repid := find_report_object('REPORT2');      
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
    set_report_object_property(repid, report_comm_mode, 1);
    set_report_object_property(repid, report_destype, cache);
    set_report_object_property(repid, report_desformat, 'PDF');
    set_report_object_property(repid, report_server, 'myserver');
    v_rep := run_report_object(repid);
    rep_status := report_object_status(v_rep);
    WHILE rep_status IN ('RUNNING', 'OPENING_REPORT', 'ENQUEUED')
    LOOP
    rep_status := report_object_status(v_rep);
    END LOOP;
    message(rep_status);
    IF rep_status = 'FINISHED'
    THEN
    web.show_document('http://localhost:8889/reports/rwservlet/showjobid' || substr(v_rep, instr(v_rep, '_', -1) + 1)
    || '?server = myserver');
    ELSE
    message('error while running reports-object ' || error_text);
    message(' ');
    clear_message;
    END IF;
    EXCEPTION
         WHEN OTHERS THEN
    message('error while running reports-object' || error_text );
    END;
    I have been trying the whole 5 days running this report but it is giving me error, i am making simple report which select all data and display from emp table, please help. Error I am getting is unable to run the report and Terminated_Report.

    Hi,
    Check this link...How to call a report in Forms 10g ?
    Hope this works...
    Hamid

  • Getting error while posting reports on Unix Process Scheduler Server

    Hello ,
    I am getting the below error while posting reports on Unix Process Scheduler Server .
    PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
    PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) HTTP transfer error.
    PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) Post Report Elapsed Time: 0.0900
    PSDSTSRV.14171 (10) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
    Please advise ,thank you.

    user5838027 wrote:
    Node name :PS_HTTP
    URL: http://ddas1020.dev.com:16000/psreports/hrdmo
    URI:SchedulerTransfer/hr90dmo
    URI Port: 16000
    Please let me know if any other info is needed.
    Thanks.
    typo...
    URL: http://ddas1020.dev.com:16000/psreports/hr90dmo
    Hopefully, your application URL looks like http://ddas1020.dev.com:16000/psp/hr90dmo/..., your URI host looks like ddas1020.dev.com (or corresponding ip address), and hhtp is checked.
    Did you also tried to give the web login/password ?
    Nicolas.

  • Error while trying to provision OIM user to Active Directory using SSL

    Hi All,
    I am able to see the users through LDAP browser using SSL but am getting the following error while trying to provision OIM users to AD using SSL.
    I am using Microsoft Active Directory connector type 9.11.
    Response: Connection Error encountered
    Response Description: Error encountered while connecting to target system
    I did some testing using "Diagnostic Dashboard" and the following are the results.
    Test Name: Target System SSL Trust Verification: Passed
    Test Name: Test Basic Connectivity: Failed
    Exceptions:
    ITResource information values are not correct. Enter the correct values.
    java.lang.reflect.InvocationTargetException
    javax.naming.CommunicationException: simple bind failed:
    unable to find valid certification path to requested target.Test Name: Test Provisioning:Failed
    Note: Without SLL all the above tests got Passed.
    Can anybody help me out from this issue.
    Thanks in advance.
    Pradeep Kumar.

    I am able to connect to AD using 636 port number from LDAP browser and as the following test got Passed i think that my certificatee should be correct.
    Test Name: Target System SSL Trust Verification.
    Input Parameters
    Target System: idm.orademo.com
    Port: 636 Certificate Store
    Location: /usr/java/jdk1.6.0_14/jre/lib/security/cacerts
    Result : Passed
    ITResource Values:
    ADAM LockoutThreshold Value     
    ADGroup LookUp Definition     Lookup.ADReconciliation.GroupLookup
    Admin FQDN     cn=Administrator,cn=Users,dc=orademo,dc=com
    Admin Password     *******
    Allow Password Provisioning     yes
    AtMap ADGroup     AtMap.ADGroup
    AtMap ADUser     AtMap.AD
    Invert Display Name     no
    Port Number     636
    Remote Manager Prov Lookup     AtMap.AD.RemoteScriptlookUp
    Remote Manager Prov Script Path     
    Root Context     dc=orademo,dc=com
    Server Address     idm.orademo.com
    Target Locale: TimeZone     GMT
    UPN Domain     orademo.com
    Use SSL     yes
    isADAM     no
    isLookupDN     no
    isUserDeleteLeafNode     no
    Thansk & Regards,
    Pradeep Kumar.

  • Error while reading access data (URL, user,password) for the Adapter Engine

    Hi,
    Any idea on below message? I am doing file to file scenario and got the below tarce from sxmb_moni.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
      <SAP:P1>af.pi1.piserver1</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.pi1.piserver1</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.pi1.piserver1</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Thanks
    Balaji

    It looks like the adapter engine is not able to register him self on SLD, you have to check in the SLD the "Exchange Infrastructure" domain, you have to verify restarting the J2EE the adapter engine update the entries in the SLD related to the specific XI Domain.
    Launch Visual Administrator >> Server >> Services >> SAP AF CPA Cache
    Enter the appropriate values for:
    SLD.selfregistration.hostname (Use fully qualified hostname)
    SLD.selfregistration.httpPort
    SLD.selfregistration.httpsPort
    Sandro

Maybe you are looking for