Error while calling function module to start form

Hello Experts .
First i make my data selection. Then i will get the name of the generated function module. Then i call FP Job open. up to here all is ok. But when i call the generated function module. There comes the popup error message. The text on this popup is SAP <SystemID>:System message, Workprocess restarts. Session deleted" (or similar, I only get the german text "PBI: SAP-Systemnachricht: Workprozess druchgestartet (Modus abgebrochen)).
I dont know why.
Can anybody help?
Regards
Chris

-> Executing Test Report FP_TEST_00 works correct. i see a pdf.
->Excecuting Test Report FP_CHECK_DESTINATION_SERVICE works correct
FP_JOB_CLOSE is not called in my report.
-> Executing Testreport:FP_TEST_IA_01 I get the error message:'
ADS: com.adobe.ProcessingException: Could not retrieve a password for credential: ReaderRights(200.101).'

Similar Messages

Type error while calling function module with in FOX formula

Hi,
I am getting following error while calling function module from FOX Formula:
"Types of parameter DAY_IN () and variable J_CALDAY(D) are inconsistent"
Following is the code:
DATA    I_CALDAY       TYPE 0CALDAY.
DATA    N_CALDAY       TYPE 0CALDAY.
DATA    KYF              TYPE KEYFIGURE_NAME.
FOREACH   I_CALDAY, KYF.
   CALL FUNCTION SLS_MISC_GET_LAST_DAY_OF_MONTH
      EXPORTING
         DAY_IN = I_CALDAY
      IMPORTING
         LAST_DAY_OF_MONTH = N_CALDAY.
    {KYF, N_CALDAY} = {KYF, L_CALDAY}.
ENDFOR.
Import parameter DAY_IN is of type sy-datum (that inturn is data element SYDATUM of data type DATS - same as 0CALDAY). Not sure why error is being thrown. Any idea? Thanks.
Edited by: SAP_BOY on Dec 4, 2009 5:26 PM

Hi,
I think It will not identify ,though you have (data element SYDATUM of data type DATS - same as 0CALDAY).Check it out by assigning it through a variable of type D.
Data I_CALDAY TYPE D.
Hope it may work out.
Regards,
Indu

Error while executing Function Module UNIT_CONVERSION_WITH_FACTOR.

Hi experts:
    I'm trying to use the UNIT_CONVERSION_WITH_FACTOR Function Module on
BW but an error message appears, I searched for Notes on the SAP
Marketplace but only found a single note that describes the same
situation that we're experiencing (SAP Note 1333415), the thing is that
such a note is applicable for SAP BASIS version 702 but I'm using SAP
BASIS version 700.
Steps for Reconstruction
- On transaction SE37 call the u201CUNIT_CONVERSION_WITH_FACTORu201D Function
Module.
- Click on the u201CTest/Executeu201D button (or press the F8 key).
- Enter the following values:
   o ADD_CONST = 0
   o DENOMINATOR = 1
   o INPUT = 20
   o NUMERATOR = 1568
- Click on the u201CExecuteu201D button (or press the F8 key).
- The Exception u201CTYPE_INVALIDu201D is reached and the following message
appears: u201CUse a number field for field OUTPUTu201D.
I also tried to use this Function Module on R/3 and the result was the same.
Do you have any suggestion to fix this error?
Thanks in advance for your help,
Francisco Milán.

Hi Francisco,
Check with SAP Note No. 854978.
Hope this would help you.
Rgds,
Mohit

Error while activating function module

Hi,
I copied a standard SAP function module L_TO_CREATE_DN.
When i activated the function group it throws an error saying that " Field "I_COMMIT_WORK" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement".
All the global data has been copied properly in the TOP include but still while activating the function group we are getting the above said error.
If anyone has encountered same kind of issue.......Please guide.
Thanks and regards,
Ramesh

I was also facing the same issue, when I tried copying just 1 or 2 FM's from that FG L03B.
Finally, I copied the whole function group, including all FM's into Z FG, and FM's, and it got activated w/o any hitches. Looks like there is lot of dependency between the includes and FM's code.
Regards
Deepthi

Error while transporting Function module.

Hi guys,
A z fun. Module was already created by some user on client 150.I changed,Activated it on client 180 ,but when I transport it to production I get the follow Error when I checked in "SMTS" .Please guide.
 Generation of programs and screens
 Transport request___: SA3K9A14WH
 System______________: SMP
 tp path : tp
 Version and Release: 305.12.19 46D
 Generation of programs and screens for transport request SA3K9A14WH
 Only generates programs with LOAD versions
 Start on 27.10.09 at 04:20:54
 Ended on 27.10.09 at 04:20:54
 No. of programs /Min/Avg/Max (sec): 1 0 0 0
 Generation of programs and screens
 End date and time : 20091027042054
 Ended with return code: ===> 8 <===
Selection for import 2009.10.27 04:20:33 (0) Successfully completed
Import 2009.10.27 04:20:38 (0) Successfully completed
Check versions 2009.10.27 04:20:42 (0) Successfully completed
Generation of programs and screens 2009.10.27 04:20:54 (8) Ended with errors
ment System
Checks at operating system level 2009.10.27 13:18:14 (0) Successfully completed
Export 2009.10.27 13:18:33 (0) Successfully completed
unknown
Selection for import 2009.10.27 13:18:33 (0) Successfully completed

Guys I did that ,but still get the following eror.Now I can open the function module but when Executed gets error No.2
Error NO1 :In Transport Request
SA3K9A14WN RFC Wty (G-ERP)
SMP Production System
 Selection for import 2009.10.27 06:09:40 (0) Successfully completed
 Import 2009.10.27 06:09:47 (0) Successfully completed
 Check versions 2009.10.27 06:09:52 (0) Successfully completed
 Generation of programs and screens 2009.10.27 06:10:04 (8) Ended with errors.
*Error NO2 :In "SE37"
Error generating the test frame

Error while creating Function module extracter

Hello Guru's
I am getting error while FM extracter creating.
Have created FM and Extract structure and while creating datasource using these where i am getting error as given below
1> ZV_ZFRT_INVOICES(Datasource): TABLES-paramter E_T_DATA for extractor Z_ZFRGT_INVOICES(FM) is missing
2>(DS)ZV_ZFRT_INVOICES: Field ZEILE of the provider structure is missing in extract str. ZVZFRT_INVOICES(Extract structre)
3>(DS )ZV_ZFRT_INVOICES: Field EBELP of the provider structure is missing in extract str. ZVZFRT_INVOICESExtract structre)
Please some one can help me to get out of the issue.

HI Aryan,
No need to create FM on your own. You can copy the FM from Function Group RSAX.
The procedure to create FM extractor is as follows:
1) Create an extract structure.
2) Go to SE80. Select Function Group RSAX , right click and then copy.
3) Give your own name to the function group to copy.
4) Select one appropriate FM from the list of FMs provided. eg FM RSAX_BIW_GET_DATA_SIMPLE.
5)Specify the name of new FM you want to create.
6) Go to SE37 and open the FM you have created by copying from Function Group RSAX.
7) no need to change the import tab.
8) On tables tab, for paramerter name E_T_DATA under asociate name specify the name of extract structure you hav created.
9) Under source code tab make the changes in the source code only to customise it to your requirement. eg: declare the database table you are using, make changes where datasource is in picture, etc.
I have created a generic DataSource with the help of above procedure.. I hope you will find it helpful...
Regards,
Geetanjali

Error while activation Function module for generic data extraction

Hi,
I have created a generic data source ZMATERIAL in which i have selected the Extraction by Function module. I copied the function module RSAX_BIW_GET_DATA_SIMPL to ZMATERIAL_FM, but when i activate this module it gives me error
REPORT/PROGRAM statement missing, or program type is I (INCLUDE).
The main program of the function "Z_BWGENDATAMATERIAL" does not begin with "FUNCTION-POOL".
Please help me in this.

Hi Dipika,
I think a similar issue is discussed
Refer this thread
REPORT/PROGRAM statement missing, or program type is I (INCLUDE).
Compiling INCLUDE progam
question related to includes
question related to includes
Hope these helps
Regards
Karthik

Error while using Function module SPELL_AMOUNT with arabic language AR

Hi ,
When i am trying to convert the number to words, using function module SPELL_AMOUNT with arabic language(AR),following abend message is coming and FM is getting abended.
Entry AR 0 1 in table T015Z does not have a delimiter (
Can you please provide me how to overcome this error?
Thanks & Regards
Seshagiri.

Hi Santosh,
Thanks for quick inputs.
And amount is not having any delimitors.
I have checked in table T015Z and it has entries with AR as SPRAS.
All entries are having ':' at the beginning of the arabic words,and there is no single entry with ';'.
All entries with EN as SPRAS are having delimiters ';' at the end of the words.
Numbers are correctly converted to words in english,but abending in arabic.
Any idea please.
Thanks & Regards
Seshagiri.

Xpath error in calling function module through jco

Hello Experts,
We have a production XMII system which was running fine when suddenly it started giving the xpath errors in the log file.
The error that we got was -
Uncaught exception from SAPJCOInterface_0, No nodes found in variable 'SAPJCOInterface_0.Request' and xpath:
I checked the XML found that the structure was there but values were missing in the XML. We restarted the server and the error stopped coming.
Has anyone faced similar issue ? What should be look at to find the root cause of this problem ?
Thanks,
SB

Hi,
While using the form interface variables, don't use them directly in the smartforms because form interface variable, workareas and tables are read only (in ur case g_vbeln,g_age,g_mahza). Instead of that declare a global variable in the smartform of the same type and In the initiialization tab assign print parameter values to global fields and use them in the smartform. This case holds good when u are passing tables and work areas to smartforms from print program.
Revert back if u face any problem.
Regards,
Gautham Paspala

ADS Error while calling WebDynpro Abap with Adobe Form

Hi Experts,
I have created an Adobe Form and its interface in Transaction SFP. In a WebDynpro Abap Component I created an UI-element "Interactive Form" with the context of my form. So the WebDynpro Context was created automatically. Then I tried to call the WebDynpro Application in the Internet Explorer but got the error message:
german(original):
WebDynpro Exception: Der Aufruf des ADS schlug fehl. Informationen zur Ursache finden Sie im error.pdf auf dem Applikationsserver.
english:
WebDynpro Exception: The call of ADS failed. You find information in error.pdf on Application server.
How can I call error.pdf and what can that be? One WebDynpro Component with the form runs without any problems, the other one doesn't do this. I have no idea if it is a problem with context or server or something else.
I hope you can help.
Thanks al lot.
Best regards,
Ingmar

Hi,
Check the note in this site...
https://websmp204.sap-ag.de/notes
Regards,
Raja Sekhar

Error while calling the Mapping function module for BW Extraction

Hi
iam getting runtime error while calling the BW mapping function
The error description is as shown below.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "GP466CV1Y7W2VML1PJ3VB80KDOP" had to be terminated
 because it has
 come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "CALL_MAPPING_FUNCTION" "(FORM)", nor was it propagated by a RAISING
 clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "CMS_CB_BW_MAP", the STRUCTURE parameter "EXTRACT_DATA" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter " " has an incompatible fragment view.
I am passing the EXTRACT_DATA parameter as specification LIKE with the associated type - corresponding structure
Please let me know how can i resolve this issue
Regards
Leon

Dear benarji ,
I'm having the same problem help me to correct . I have mentioned below as what error i got.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "ZDLROUTSTANDING_COPY" had to be terminated because it
 has
 come across a statement that unfortunately cannot be executed.
Error analysis
 An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "PDF" "(FORM)", nor was it propagated by a RAISING clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "/1BCDWB/SF00000080", the STRUCTURE parameter "IT_WORKS_SF" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter "SFTWORKS" has an incompatible fragment view.
Missing RAISING Clause in Interface
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 876
 Module type (FORM)
 Module Name PDF
Trigger Location of Exception
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 894
 Module type (FORM)
 Module Name PDF
Source Code Extract
Line SourceCde
864 ** i_logo = 'ENJOYSAP_LOGO'
865 * IT_LIST_COMMENTARY = I_LIST_COMMENTS1.
866
867 ENDFORM. "alv_top_of_page1
868 *&---------------------------------------------------------------------*
869 *& Form PDF
870 *&---------------------------------------------------------------------*
871 * text
872 *----------------------------------------------------------------------*
873 * --> p1 text
874 * <-- p2 text
875 *----------------------------------------------------------------------*
876 FORM pdf .
877
878 * *** Smartforms & PDF ***
879
880 ssfctrlop-no_dialog = 'X'.
881 ssfctrlop-preview = 'X'.
882 ssfctrlop-getotf = 'X'.
883 ssfcompop-tddest = 'ERP7'.
884 DATA : mcheck LIKE sy-subrc.
885 CLEAR : fm_name.
886
887 "Get Function module name for given smartform
888 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
889 EXPORTING
890 formname = 'ZSFDLOS1'
891 IMPORTING
892 fm_name = fm_name.
893
>>>> CALL FUNCTION fm_name
895 EXPORTING
896 control_parameters = ssfctrlop
897 output_options = ssfcompop
898 mrefno = mrefno
899 * P_TITLE = MTITLE
900 IMPORTING
901 document_output_info = st_document_output_info
902 job_output_info = st_job_output_info " IT_OTF_DATA
903 job_output_options = st_job_output_options
904 TABLES
905 it_works_sf = sftworks
906 EXCEPTIONS
907 formatting_error = 1
908 internal_error = 2
909 send_error = 3
910 user_canceled = 4
911 OTHERS = 5.
912
913 IF sy-subrc NE 0.
Advance Thanks

Function module of smart form delivered an error

Hi All,
I am getting an error like this
"Function module /1BCDWB/SF00000007 of smart form delivered an error"
FUNCTION /1BCDWB/SF00000007.
""Global interface:
*" IMPORTING
*" VALUE(ARCHIVE_INDEX) TYPE TOA_DARA OPTIONAL
*" VALUE(ARCHIVE_PARAMETERS) TYPE ARC_PARAMS OPTIONAL
*" VALUE(CONTROL_PARAMETERS) TYPE SSFCTRLOP OPTIONAL
*" VALUE(MAIL_APPL_OBJ) TYPE SWOTOBJID OPTIONAL
*" VALUE(MAIL_RECIPIENT) TYPE SWOTOBJID OPTIONAL
*" VALUE(MAIL_SENDER) TYPE SWOTOBJID OPTIONAL
*" VALUE(OUTPUT_OPTIONS) TYPE SSFCOMPOP OPTIONAL
*" VALUE(USER_SETTINGS) TYPE TDBOOL DEFAULT 'X'
*" VALUE(ARCHIVE_INDEX_TAB) TYPE TSFDARA OPTIONAL
*" REFERENCE(ORDERADM_H) TYPE CRMT_OUTPUT_ORDERADM_H_COM
*" REFERENCE(ACTIVITY_H) TYPE CRMT_OUTPUT_ACTIVITY_H_COM
*" REFERENCE(OPPORT_H) TYPE CRMT_OUTPUT_OPPORT_H_COM
*" REFERENCE(ORGMAN_H) TYPE CRMT_OUTPUT_ORGMAN_H_COM
*" REFERENCE(PARTNER_H) TYPE CRMT_OUTPUT_PARTNER_H_COMT
*" REFERENCE(PRICINGDATA_H) TYPE
*" CRMT_OUTPUT_PRICINGDATA_H_COM
*" REFERENCE(SALES_H) TYPE CRMT_OUTPUT_SALES_H_COM
*" REFERENCE(SHIPPING_H) TYPE CRMT_OUTPUT_SHIPPING_H_COM
*" REFERENCE(PAYPLAN_D_H) TYPE
*" CRMT_OUTPUT_PAYPLAN_D_H_COMT
*" REFERENCE(CUMULAT_H) TYPE CRMT_OUTPUT_CUMULAT_H_COM
*" REFERENCE(CUSTOMER_H) TYPE CRMT_OUTPUT_CUSTOMER_H_COM
*" REFERENCE(ACS_H) TYPE CRMT_ACS_H_COM
*" REFERENCE(BILLING_H) TYPE CRMT_OUTPUT_BILLING_H_COMT
*" REFERENCE(CANCEL_H) TYPE CRMT_OUTPUT_CANCEL_H_COMT
*" REFERENCE(APPOINTMENT_H) TYPE
*" CRMT_OUTPUT_APPOINTMENT_H_COMT
*" REFERENCE(BILLPLAN_D_H) TYPE
*" CRMT_OUTPUT_BILLPLAN_D_H_COMT
*" REFERENCE(BILLPLAN_H) TYPE CRMT_OUTPUT_BILLPLAN_H_COMT
*" REFERENCE(STATUS_D_H) TYPE CRMT_OUTPUT_STATUS_D_H_COMT
*" REFERENCE(STATUS_H) TYPE CRMT_OUTPUT_STATUS_H_COMT
*" REFERENCE(SRV_SUBJECT_H) TYPE
*" CRMT_OUTPUT_SRV_SUBJECT_H_COMT
*" REFERENCE(SRV_SUBJECT_I) TYPE
*" CRMT_OUTPUT_SRV_SUBJECT_H_COMT
*" REFERENCE(SRV_REASON_H) TYPE
*" CRMT_OUTPUT_SRV_REASON_H_COMT
*" REFERENCE(SRV_RESULT_H) TYPE
*" CRMT_OUTPUT_SRV_RESULT_H_COMT
*" REFERENCE(SRV_REFOBJ_H) TYPE
*" CRMT_OUTPUT_SRV_REFOBJ_H_COMT
*" REFERENCE(SRV_REFOBJ_I) TYPE
*" CRMT_OUTPUT_SRV_REFOBJ_H_COMT
*" REFERENCE(ORDERADM_I) TYPE CRMT_OUTPUT_ORDERADM_I_COMT
*" REFERENCE(ORDERADM_I_IN) TYPE
*" CRMT_OUTPUT_ORDERADM_I_IN_COMT
*" REFERENCE(ORDERADM_I_QT) TYPE
*" CRMT_OUTPUT_ORDERADM_I_QT_COMT
*" REFERENCE(ORGMAN_I) TYPE CRMT_OUTPUT_ORGMAN_I_COMT
*" REFERENCE(PRICINGDATA_I) TYPE
*" CRMT_OUTPUT_PRICINGDATA_I_COMT
*" REFERENCE(PRICING_I) TYPE CRMT_OUTPUT_PRICING_I_COMT
*" REFERENCE(PRODUCT_I) TYPE CRMT_OUTPUT_PRODUCT_I_COMT
*" REFERENCE(SALES_I) TYPE CRMT_OUTPUT_SALES_I_COMT
*" REFERENCE(SERVICE_I) TYPE CRMT_OUTPUT_SERVICE_I_COMT
*" REFERENCE(SCHEDLIN_I) TYPE CRMT_OUTPUT_SCHEDLIN_I_COMT
*" REFERENCE(SCHEDLIN_I_CF) TYPE
*" CRMT_OUTPUT_SCHEDLIN_I_CF_COMT
*" REFERENCE(SHIPPING_I) TYPE CRMT_OUTPUT_SHIPPING_I_COMT
*" REFERENCE(PARTNER_I) TYPE CRMT_OUTPUT_PARTNER_I_COMT
*" REFERENCE(ITEM_CSTICS_I) TYPE CRMT_ITEM_CSTICS_TAB
*" REFERENCE(CUSTOMER_I) TYPE CRMT_OUTPUT_CUSTOMER_I_COMT
*" REFERENCE(BILLING_I) TYPE CRMT_OUTPUT_BILLING_I_COMT
*" REFERENCE(CANCEL_I) TYPE CRMT_OUTPUT_CANCEL_I_COMT
*" REFERENCE(FINPROD_I) TYPE CRMT_OUTPUT_FINPROD_I_COMT
*" REFERENCE(ORDPRP_I) TYPE CRMT_OUTPUT_ORDPRP_I_COMT
*" REFERENCE(APPOINTMENT_I) TYPE
*" CRMT_OUTPUT_APPOINTMENT_I_COMT
*" REFERENCE(BILLPLAN_D_I) TYPE
*" CRMT_OUTPUT_BILLPLAN_D_I_COMT
*" REFERENCE(BILLPLAN_I) TYPE CRMT_OUTPUT_BILLPLAN_I_COMT
*" REFERENCE(STATUS_I) TYPE CRMT_OUTPUT_STATUS_I_COMT
*" REFERENCE(WORKING_SET_E_S_BBP) TYPE
*" /1CN/WORKING_SET_E_S_BBP_T
*" REFERENCE(LANGUAGE) TYPE SY-LANGU
*" REFERENCE(SERVICE_I_ASSI) TYPE
*" CRMT_OUTPUT_SERVICE_I_***_COMT
*" VALUE(FORM_TYPE) TYPE C OPTIONAL
*" REFERENCE(Y_V_PARTNER_FLAG) TYPE C OPTIONAL
*" EXPORTING
*" VALUE(DOCUMENT_OUTPUT_INFO) TYPE SSFCRESPD
*" VALUE(JOB_OUTPUT_INFO) TYPE SSFCRESCL
*" VALUE(JOB_OUTPUT_OPTIONS) TYPE SSFCRESOP
*" EXCEPTIONS
*" FORMATTING_ERROR
*" INTERNAL_ERROR
*" SEND_ERROR
*" USER_CANCELED
DATA: %INPUT TYPE SSFCOMPIN,
 %RESULT_OP TYPE SSFCRESOP,
 %RESULT_PD TYPE SSFCRESPD,
 %RESULT_CL TYPE SSFCRESCL,
 %TABDEF LIKE LINE OF %TABDEFS,
 %ARCTAB TYPE TSFDARA,
 BEGIN OF %FULLNAME,
 FORM TYPE TDSFNAME VALUE 'YCRM_ORDER_SERVICE_RMA',
 VARI TYPE TDVARIANT,
 ACTV TYPE TDBOOL VALUE 'X',
 END OF %FULLNAME.
TYPES: T_XDF_ELEM(255) TYPE C,
 T_XDF_ATTR(255) TYPE C.
DATA: IMPORT_PARAMETER TYPE TABLE OF RSIMP WITH HEADER LINE,
 CHANGING_PARAMETER TYPE TABLE OF RSCHA WITH HEADER LINE,
 TABLES_PARAMETER TYPE TABLE OF RSTBL WITH HEADER LINE,
 EXPORT_PARAMETER TYPE TABLE OF RSEXP WITH HEADER LINE,
 EXCEPTION_LIST TYPE TABLE OF RSEXC WITH HEADER LINE.
DATA: XDF_TABLE TYPE TSFIXML,
 XDF_LENGTH TYPE I.
DATA: XDF_DOCUMENT TYPE REF TO IF_IXML_DOCUMENT,
 XDF_PARAMETER TYPE REF TO IF_IXML_ELEMENT,
 L_NAME TYPE STRING,
 L_VALUE TYPE STRING,
 L_OBJECT TYPE STRING,
 L_DATE TYPE STRING,
 L_TIME TYPE STRING,
 RC TYPE SY-SUBRC.
FIELD-SYMBOLS: <DATA_OBJECT> TYPE ANY.
CLASS CL_IXML DEFINITION LOAD.
CONSTANTS: C_XDF_ROOT_ELEMENT TYPE T_XDF_ELEM VALUE 'XDF',
 C_XDF_ATTR_TYPE TYPE T_XDF_ATTR VALUE 'TYPE',
 C_XDF_ATTR_TIMESTAMP TYPE T_XDF_ATTR VALUE 'TIMESTAMP',
 C_XDF_ATTR_OBJ TYPE T_XDF_ATTR VALUE 'OBJECT'.
DATA: XDF_FACTORY TYPE REF TO IF_IXML,
 XDF_ROOT_ELEMENT TYPE REF TO IF_IXML_ELEMENT.
DATA: L_GETSTATE TYPE DDTYPEGET,
 L_TYPE TYPE DDTYPEKIND,
 L_TYPE_NAME TYPE TYPENAME,
 L_DDIC_OBJ TYPE DDTYPES OCCURS 0 WITH HEADER LINE,
 L_DD02L_STATE TYPE DD02L OCCURS 0 WITH HEADER LINE,
 L_DD04L_STATE TYPE DD04L OCCURS 0 WITH HEADER LINE,
 L_DD40L_STATE TYPE DD40L OCCURS 0 WITH HEADER LINE,
 L_XMLOUTPUT TYPE SSFXMLOUT,
 L_SFSY TYPE SFSY.
TYPE-POOLS: ABAP.
DATA: XDF2_IXML TYPE REF TO IF_IXML,
 XDF2_DOCUMENT TYPE REF TO IF_IXML_DOCUMENT,
 XDF2_SRC_OBJECTS TYPE ABAP_TRANS_SRCBIND_TAB,
 XDF2_SRC_OBJECT LIKE LINE OF XDF2_SRC_OBJECTS.
DEFINE XDF2_APPEND_SRC_OBJECT.
XDF2_SRC_OBJECT-NAME = '&1'.
TRANSLATE XDF2_SRC_OBJECT-NAME TO UPPER CASE.
GET REFERENCE OF &2 INTO XDF2_SRC_OBJECT-VALUE.
APPEND XDF2_SRC_OBJECT TO XDF2_SRC_OBJECTS.
END-OF-DEFINITION.
DEFINE XDF_GET_DDIC_INFO.
CLEAR L_DDIC_OBJ.
IF NOT &2 IS INITIAL.
 L_TYPE_NAME = &2.
ELSEIF NOT &1-TYP IS INITIAL.
 L_TYPE_NAME = &1-TYP.
ELSEIF NOT &1-LINE_OF IS INITIAL.
 L_TYPE_NAME = &1-LINE_OF.
ELSEIF NOT &1-TABLE_OF IS INITIAL.
 L_TYPE_NAME = &1-TABLE_OF.
ELSE.
 CLEAR L_TYPE_NAME.
ENDIF.
CALL FUNCTION 'DDIF_TYPEINFO_GET'
 EXPORTING TYPENAME = L_TYPE_NAME
 IMPORTING TYPEKIND = L_TYPE.
L_DDIC_OBJ-TYPENAME = L_TYPE_NAME.
L_DDIC_OBJ-TYPEKIND = L_TYPE.
IF NOT L_DDIC_OBJ IS INITIAL.
 COLLECT L_DDIC_OBJ.
ENDIF.
END-OF-DEFINITION.
DEFINE XDF_CREATE_DATA_STREAM.
CLEAR: L_OBJECT, L_DATE, L_TIME, L_NAME, L_TYPE_NAME, L_VALUE.
IF &3 = 'T'.
 CONCATENATE &1-PARAMETER '[]' INTO L_NAME.
ELSE.
 L_NAME = &1-PARAMETER.
ENDIF.
IF NOT &2 IS INITIAL.
 ASSIGN (L_NAME) TO <DATA_OBJECT>
 CASTING TYPE (&2).
 L_TYPE_NAME = &2.
ELSEIF NOT &1-TYP IS INITIAL.
 ASSIGN (L_NAME) TO <DATA_OBJECT>
 CASTING TYPE (&1-TYP).
 L_TYPE_NAME = &1-TYP.
ELSEIF NOT &1-LINE_OF IS INITIAL.
 ASSIGN (L_NAME) TO <DATA_OBJECT>.
 L_TYPE_NAME = &1-LINE_OF.
ELSEIF NOT &1-TABLE_OF IS INITIAL.
 ASSIGN (L_NAME) TO <DATA_OBJECT>.
 L_TYPE_NAME = &1-TABLE_OF.
ELSE.
 ASSIGN (L_NAME) TO <DATA_OBJECT>.
 CLEAR L_TYPE_NAME.
ENDIF.
CALL FUNCTION 'SDIXML_DATA_TO_DOM'
 EXPORTING
 NAME = L_NAME
 DATAOBJECT = <DATA_OBJECT>
 IMPORTING
 DATA_AS_DOM = XDF_PARAMETER
 CHANGING
 DOCUMENT = XDF_DOCUMENT
 EXCEPTIONS
 OTHERS = 1.
L_NAME = C_XDF_ATTR_TYPE.
L_VALUE = L_TYPE_NAME.
CALL METHOD XDF_PARAMETER->SET_ATTRIBUTE
 EXPORTING NAME = L_NAME
 VALUE = L_VALUE
 RECEIVING RVAL = RC.
CLEAR L_DDIC_OBJ.
READ TABLE L_DDIC_OBJ WITH KEY TYPENAME = L_TYPE_NAME.
CASE L_DDIC_OBJ-TYPEKIND.
 WHEN 'S'.
 READ TABLE L_DD02L_STATE WITH KEY TABNAME = &1-TYP.
 L_DATE = L_DD02L_STATE-AS4DATE.
 L_TIME = L_DD02L_STATE-AS4TIME.
 L_OBJECT = 'TABL'.
 WHEN 'E'. " data elements
 READ TABLE L_DD04L_STATE WITH KEY ROLLNAME = &1-TYP.
 L_DATE = L_DD04L_STATE-AS4DATE.
 L_TIME = L_DD04L_STATE-AS4TIME.
 L_OBJECT = 'DTEL'.
 WHEN 'L'. " table types
 READ TABLE L_DD40L_STATE WITH KEY TYPENAME = &1-TYP.
 L_DATE = L_DD40L_STATE-AS4DATE.
 L_TIME = L_DD40L_STATE-AS4TIME.
 L_OBJECT = 'TTYP'.
 WHEN OTHERS.
 CLEAR: L_DATE, L_TIME, L_OBJECT.
ENDCASE.
L_NAME = C_XDF_ATTR_OBJ.
CALL METHOD XDF_PARAMETER->SET_ATTRIBUTE
 EXPORTING NAME = L_NAME
 VALUE = L_OBJECT
 RECEIVING RVAL = RC.
L_NAME = C_XDF_ATTR_TIMESTAMP.
CONCATENATE L_DATE L_TIME INTO L_VALUE.
CALL METHOD XDF_PARAMETER->SET_ATTRIBUTE
 EXPORTING NAME = L_NAME
 VALUE = L_VALUE
 RECEIVING RVAL = RC.
CALL METHOD XDF_ROOT_ELEMENT->APPEND_CHILD
 EXPORTING NEW_CHILD = XDF_PARAMETER
 RECEIVING RVAL = RC.
CHECK RC = 0.
END-OF-DEFINITION.
CLEAR DOCUMENT_OUTPUT_INFO.
CLEAR JOB_OUTPUT_INFO.
CLEAR JOB_OUTPUT_OPTIONS.
L_SFSY = SFSY.
CLEAR SFSY.
SFSY-PAGE = L_SFSY-PAGE.
SFSY-FORMPAGES = L_SFSY-FORMPAGES.
SFSY-JOBPAGES = L_SFSY-JOBPAGES.
SFSY-XDF = L_SFSY-XDF.
SFSY-XDF2 = L_SFSY-XDF2.
CLEAR INTSFSY.
IF CONTROL_PARAMETERS-NO_OPEN = SPACE.
 CALL FUNCTION 'SSF_CREATE_COMPOSER_INPUT'
 EXPORTING
 ARCHIVE_PARAMETERS = ARCHIVE_PARAMETERS
 USER_SETTINGS = USER_SETTINGS
 MAIL_SENDER = MAIL_SENDER
 MAIL_RECIPIENT = MAIL_RECIPIENT
 MAIL_APPL_OBJ = MAIL_APPL_OBJ
 OUTPUT_OPTIONS = OUTPUT_OPTIONS
 CONTROL_PARAMETERS = CONTROL_PARAMETERS
 IMPORTING
 INPUT = %INPUT.
IF OUTPUT_OPTIONS-XSFCMODE = SPACE.
 %INPUT-XSF = ' '.
 %INPUT-XSFOUTMODE = ' '.
 %INPUT-XSFOUTDEV = ' '.
 %INPUT-XSFACTION = ' '.
 %INPUT-XSFFORMAT = ' '.
ENDIF.
CALL FUNCTION 'SSFCOMP_OPEN'
 EXPORTING INPUT = %INPUT
 IMPORTING RESULT = %RESULT_OP
 EXCEPTIONS OTHERS = 1.
IF SY-SUBRC <> 0.
 %VARIANT = SPACE.
 PERFORM %RAISE.
ENDIF.
JOB_OUTPUT_OPTIONS = %RESULT_OP.
ENDIF.
IF SFSY-XDF = 'X'.
CALL FUNCTION 'FUNCTION_IMPORT_INTERFACE'
 EXPORTING
 FUNCNAME = '/1BCDWB/SF00000007'
 INACTIVE_VERSION = SPACE
 TABLES
 IMPORT_PARAMETER = IMPORT_PARAMETER
 CHANGING_PARAMETER = CHANGING_PARAMETER
 TABLES_PARAMETER = TABLES_PARAMETER
 EXPORT_PARAMETER = EXPORT_PARAMETER
 EXCEPTION_LIST = EXCEPTION_LIST
 EXCEPTIONS
 OTHERS = 1.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
L_GETSTATE-TBHD = L_GETSTATE-TBFD = L_GETSTATE-DTEL = 'X'.
L_GETSTATE-TTHD = L_GETSTATE-TTFD = 'X'.
LOOP AT IMPORT_PARAMETER.
 XDF_GET_DDIC_INFO IMPORT_PARAMETER IMPORT_PARAMETER-DBFIELD.
ENDLOOP.
LOOP AT CHANGING_PARAMETER.
 XDF_GET_DDIC_INFO CHANGING_PARAMETER
 CHANGING_PARAMETER-DBFIELD.
ENDLOOP.
LOOP AT TABLES_PARAMETER.
 XDF_GET_DDIC_INFO TABLES_PARAMETER TABLES_PARAMETER-DBSTRUCT.
ENDLOOP.
CALL FUNCTION 'DD_TYPEINFO_GET'
 EXPORTING GETSTATE = L_GETSTATE
 TABLES DDTYPES_TAB = L_DDIC_OBJ[]
 DD02L_TAB = L_DD02L_STATE[]
 DD04L_TAB = L_DD04L_STATE[]
 DD40L_TAB = L_DD40L_STATE[].
XDF_FACTORY = CL_IXML=>CREATE( ).
XDF_DOCUMENT = XDF_FACTORY->CREATE_DOCUMENT( ).
L_NAME = C_XDF_ROOT_ELEMENT.
XDF_ROOT_ELEMENT
 = XDF_DOCUMENT->CREATE_ELEMENT( NAME = L_NAME ).
CALL METHOD XDF_DOCUMENT->APPEND_CHILD
 EXPORTING NEW_CHILD = XDF_ROOT_ELEMENT
 RECEIVING RVAL = RC.
CHECK RC = 0.
LOOP AT IMPORT_PARAMETER.
 XDF_CREATE_DATA_STREAM IMPORT_PARAMETER
 IMPORT_PARAMETER-DBFIELD 'I'.
ENDLOOP.
LOOP AT CHANGING_PARAMETER.
 XDF_CREATE_DATA_STREAM CHANGING_PARAMETER
 CHANGING_PARAMETER-DBFIELD 'C'.
ENDLOOP.
LOOP AT TABLES_PARAMETER.
 XDF_CREATE_DATA_STREAM TABLES_PARAMETER
 TABLES_PARAMETER-DBSTRUCT 'T'.
ENDLOOP.
CALL FUNCTION 'SSFCOMP_XDF_OUTPUT'
 EXPORTING DOCUMENT = XDF_DOCUMENT
 EXCEPTIONS OTHERS = 1.
ELSEIF SFSY-XDF2 = 'X'.
XDF2_IXML = CL_IXML=>CREATE( ).
XDF2_DOCUMENT = XDF2_IXML->CREATE_DOCUMENT( ).
XDF2_APPEND_SRC_OBJECT ARCHIVE_INDEX ARCHIVE_INDEX.
XDF2_APPEND_SRC_OBJECT ARCHIVE_PARAMETERS ARCHIVE_PARAMETERS.
XDF2_APPEND_SRC_OBJECT CONTROL_PARAMETERS CONTROL_PARAMETERS.
XDF2_APPEND_SRC_OBJECT MAIL_APPL_OBJ MAIL_APPL_OBJ.
XDF2_APPEND_SRC_OBJECT MAIL_RECIPIENT MAIL_RECIPIENT.
XDF2_APPEND_SRC_OBJECT MAIL_SENDER MAIL_SENDER.
XDF2_APPEND_SRC_OBJECT OUTPUT_OPTIONS OUTPUT_OPTIONS.
XDF2_APPEND_SRC_OBJECT USER_SETTINGS USER_SETTINGS.
XDF2_APPEND_SRC_OBJECT ARCHIVE_INDEX_TAB ARCHIVE_INDEX_TAB.
XDF2_APPEND_SRC_OBJECT ORDERADM_H ORDERADM_H.
XDF2_APPEND_SRC_OBJECT ACTIVITY_H ACTIVITY_H.
XDF2_APPEND_SRC_OBJECT OPPORT_H OPPORT_H.
XDF2_APPEND_SRC_OBJECT ORGMAN_H ORGMAN_H.
XDF2_APPEND_SRC_OBJECT PARTNER_H PARTNER_H.
XDF2_APPEND_SRC_OBJECT PRICINGDATA_H PRICINGDATA_H.
XDF2_APPEND_SRC_OBJECT SALES_H SALES_H.
XDF2_APPEND_SRC_OBJECT SHIPPING_H SHIPPING_H.
XDF2_APPEND_SRC_OBJECT PAYPLAN_D_H PAYPLAN_D_H.
XDF2_APPEND_SRC_OBJECT CUMULAT_H CUMULAT_H.
XDF2_APPEND_SRC_OBJECT CUSTOMER_H CUSTOMER_H.
XDF2_APPEND_SRC_OBJECT ACS_H ACS_H.
XDF2_APPEND_SRC_OBJECT BILLING_H BILLING_H.
XDF2_APPEND_SRC_OBJECT CANCEL_H CANCEL_H.
XDF2_APPEND_SRC_OBJECT APPOINTMENT_H APPOINTMENT_H.
XDF2_APPEND_SRC_OBJECT BILLPLAN_D_H BILLPLAN_D_H.
XDF2_APPEND_SRC_OBJECT BILLPLAN_H BILLPLAN_H.
XDF2_APPEND_SRC_OBJECT STATUS_D_H STATUS_D_H.
XDF2_APPEND_SRC_OBJECT STATUS_H STATUS_H.
XDF2_APPEND_SRC_OBJECT SRV_SUBJECT_H SRV_SUBJECT_H.
XDF2_APPEND_SRC_OBJECT SRV_SUBJECT_I SRV_SUBJECT_I.
XDF2_APPEND_SRC_OBJECT SRV_REASON_H SRV_REASON_H.
XDF2_APPEND_SRC_OBJECT SRV_RESULT_H SRV_RESULT_H.
XDF2_APPEND_SRC_OBJECT SRV_REFOBJ_H SRV_REFOBJ_H.
XDF2_APPEND_SRC_OBJECT SRV_REFOBJ_I SRV_REFOBJ_I.
XDF2_APPEND_SRC_OBJECT ORDERADM_I ORDERADM_I.
XDF2_APPEND_SRC_OBJECT ORDERADM_I_IN ORDERADM_I_IN.
XDF2_APPEND_SRC_OBJECT ORDERADM_I_QT ORDERADM_I_QT.
XDF2_APPEND_SRC_OBJECT ORGMAN_I ORGMAN_I.
XDF2_APPEND_SRC_OBJECT PRICINGDATA_I PRICINGDATA_I.
XDF2_APPEND_SRC_OBJECT PRICING_I PRICING_I.
XDF2_APPEND_SRC_OBJECT PRODUCT_I PRODUCT_I.
XDF2_APPEND_SRC_OBJECT SALES_I SALES_I.
XDF2_APPEND_SRC_OBJECT SERVICE_I SERVICE_I.
XDF2_APPEND_SRC_OBJECT SCHEDLIN_I SCHEDLIN_I.
XDF2_APPEND_SRC_OBJECT SCHEDLIN_I_CF SCHEDLIN_I_CF.
XDF2_APPEND_SRC_OBJECT SHIPPING_I SHIPPING_I.
XDF2_APPEND_SRC_OBJECT PARTNER_I PARTNER_I.
XDF2_APPEND_SRC_OBJECT ITEM_CSTICS_I ITEM_CSTICS_I.
XDF2_APPEND_SRC_OBJECT CUSTOMER_I CUSTOMER_I.
XDF2_APPEND_SRC_OBJECT BILLING_I BILLING_I.
XDF2_APPEND_SRC_OBJECT CANCEL_I CANCEL_I.
XDF2_APPEND_SRC_OBJECT FINPROD_I FINPROD_I.
XDF2_APPEND_SRC_OBJECT ORDPRP_I ORDPRP_I.
XDF2_APPEND_SRC_OBJECT APPOINTMENT_I APPOINTMENT_I.
XDF2_APPEND_SRC_OBJECT BILLPLAN_D_I BILLPLAN_D_I.
XDF2_APPEND_SRC_OBJECT BILLPLAN_I BILLPLAN_I.
XDF2_APPEND_SRC_OBJECT STATUS_I STATUS_I.
XDF2_APPEND_SRC_OBJECT WORKING_SET_E_S_BBP WORKING_SET_E_S_BBP.
XDF2_APPEND_SRC_OBJECT LANGUAGE LANGUAGE.
XDF2_APPEND_SRC_OBJECT SERVICE_I_ASSI SERVICE_I_ASSI.
XDF2_APPEND_SRC_OBJECT FORM_TYPE FORM_TYPE.
XDF2_APPEND_SRC_OBJECT Y_V_PARTNER_FLAG Y_V_PARTNER_FLAG.
XDF2_APPEND_SRC_OBJECT JOB_OUTPUT_INFO JOB_OUTPUT_INFO.
CALL TRANSFORMATION ID
 SOURCE (XDF2_SRC_OBJECTS)
 RESULT XML XDF2_DOCUMENT.
CALL FUNCTION 'SSFCOMP_XDF2_OUTPUT'
 EXPORTING
 DOCUMENT = XDF2_DOCUMENT
 EXCEPTIONS
 OTHERS = 1.
IF SY-SUBRC <> 0. RAISE ERROR. ENDIF.
ELSE.
%FULLNAME-VARI = %VARIANT.
%VARIANT = SPACE.
IF %HEADER IS INITIAL.
 IMPORT HEADER TO %HEADER
 REFTAB TO %REFTAB
 DOCSTRUC TO %DOCSTRUC
 TABDEF TO %TABDEFS
 FROM DATABASE STXFCONTR(SF) ID %FULLNAME.
 IF SY-SUBRC <> 0.
 CALL FUNCTION 'SSFRT_SET_ERROR_PARAMETERS'
 EXPORTING I_FORM = 'YCRM_ORDER_SERVICE_RMA'.
 CALL FUNCTION 'SSFRT_WRITE_ERROR'
 EXPORTING I_ERRNUMBER = SSF_ERR_NO_RUNTIME_OBJECT
 I_MSGID = 'SSFCOMPOSER'
 I_MSGNO = '002'
 I_MSGV1 = 'YCRM_ORDER_SERVICE_RMA'.
 PERFORM %RAISE.
 ENDIF.
 SELECT SINGLE SDATE STIME FROM D010SINF
 INTO (%HEADER-SDATE, %HEADER-STIME)
 WHERE PROG = '/1BCDWB/SAPLSF00000007'
 AND R3STATE = 'A'.
 IF SY-SUBRC <> 0.
 CLEAR: %HEADER-SDATE,
 %HEADER-STIME.
 ENDIF.
ENDIF.
LOOP AT %TABDEFS INTO %TABDEF.
 CALL FUNCTION 'SSFCOMP_TABLE_DEFINITION'
 EXPORTING CPI = %HEADER-CPI
 LPI = %HEADER-LPI
 CHANGING TABDEF = %TABDEF
 EXCEPTIONS OTHERS = 1.
 IF SY-SUBRC <> 0. PERFORM %RAISE. ENDIF.
ENDLOOP.
CALL FUNCTION 'SSFRT_SET_REFERENCES'
 EXPORTING I_REFTAB = %REFTAB .
CALL FUNCTION 'SSFRT_SET_LANGUAGES'
 EXPORTING I_CONTROL_PARAMETERS = CONTROL_PARAMETERS
 I_MASTERLANGUAGE = 'E'
 I_THRULANG = ' '
 I_INSTALL_LANG = ' '
 IMPORTING O_LANGUAGES = %LANGUAGES.
%HEADER-LANGU = %LANGUAGES-LANGU1.
%WEXIT = SPACE.
PERFORM %GLOBAL_CLEAR.
PERFORM %GLOBAL_INIT.
CLEAR %ARCTAB.
IF ARCHIVE_INDEX_TAB[] IS INITIAL.
 APPEND ARCHIVE_INDEX TO %ARCTAB.
ELSE.
 %ARCTAB = ARCHIVE_INDEX_TAB.
ENDIF.
> CALL FUNCTION 'SSFCOMP_PROCESS_DOCUMENT'
 EXPORTING HEADER = %HEADER
 DOCSTRUC = %DOCSTRUC
 STARTPAGE = CONTROL_PARAMETERS-STARTPAGE
 ARCHIV_INDEX_TAB = %ARCTAB
 MAIL_APPL_OBJECT = MAIL_APPL_OBJ
 IMPORTING RESULT = %RESULT_PD
 EXCEPTIONS OTHERS = 1.
IF SY-SUBRC <> 0. PERFORM %RAISE. ENDIF.
DOCUMENT_OUTPUT_INFO = %RESULT_PD.
ENDIF.
The function module 'SSFCOMP_PROCESS_DOCUMENT' is returning sy-subrc value 1.
Could you please tell me how to rectify this error
Thanks and Regards,
Soumya.

The error I am getting is a formatting error as shown below:
L_ERROR-MSGTY E
L_ERROR-MSGID SSFCOMPOSER
L_ERROR-MSGV1 YTI_FCR004_RETREP_TYPE

How to capture errors when a Function module is called as BACKGROUND TASK

How to capture errors when a Function module is called as BACKGROUND TASK?.Please advise.
FUNCTION ZRPM_DELETE_PROJECT_DATA_API.
""Local interface:
*" IMPORTING
*"     VALUE(IV_EXTERNAL_ID) TYPE RPM_TV_EXTID OPTIONAL
*"     VALUE(IV_PROJECT_GUID) TYPE RPM_TV_GUID OPTIONAL
*"     VALUE(FLAG) TYPE BOOLEAN OPTIONAL
*" EXPORTING
*"     VALUE(EV_RC) TYPE I
*"     VALUE(EV_MSG) TYPE STRING
*"     VALUE(ET_MSG) TYPE RPM_TT_MESSAGES
IF flag = cl_rpm_co=>sc_true.
    Call function 'RPM_DELETE_PROJECT_DATA' IN BACKGROUND TASK
      EXPORTING
        IV_EXTERNAL_ID = IV_EXTERNAL_ID
        IV_PROJECT_GUID = IV_PROJECT_GUID
      IMPORTING
        EV_RC           = EV_RC
        EV_MSG          = EV_RC
        ET_MSG          = ET_MSG.
    COMMIT WORK.
ELSE.
    CALL FUNCTION 'RPM_DELETE_PROJECT_DATA'
      EXPORTING
        IV_EXTERNAL_ID = IV_EXTERNAL_ID
        IV_PROJECT_GUID = IV_PROJECT_GUID
      IMPORTING
        EV_RC           = EV_RC
        EV_MSG          = EV_MSG
        ET_MSG          = ET_MSG.
ENDIF.
ENDFUNCTION.
In above code how to capture 'EV_RC' when FM is called as background task.

Prakash,
CALL FUNCTION IN BACKGROUND TASK allows no IMPORTING parameters, so that your code will produce a syntax error.
The calling program can only handle errors of remote function calls (RFC) if these are either
- synchronous RFC (that is CALL FUNCTION ... DESTINATION ...) or
- asynchronous RFC (that is CALL FUNCTION STARTING NEW TASK ... DESTINATION ...).
Both synchronous and asynchronous RFC allow the capturing of errors by means of exceptions. But that is a different topic.

Access denied Error while calling Web Service form Infopath Form 2010.

Hi Dear All,
I have been facing an error while calling an GetUserProfileByName() web service method from InfoPath 2010 from.
i have FBA(Forms Base Authentication )configured . After Infopath form published to site collection when i select an user from people picker control i want to get Email Id of Selected user for that i am calling getUserProfileByName() Web Method, but
i am getting Access denied error code 500.
Any Help would be more than welcome.
Thanks.

Hi,
Greetings. Please check
Check the IE settings. Click Internet Options> Security>Custom level. Make sure that the ‘Access data source across domains’ is enabled. Make sure that you have permission to the web service and to the content which the web service tries to modify.
For more information, please refer to this site:
"Access is denied." error in Infopath 2007 form + ASMX: http://us.generation-nt.com/answer/access-denied-error-infopath-2007-form-plus-asmx-help-65808252.html
Please remember to click 'Mark as Answer' on the answer if it helps you

Error BT616 when calling function module SXPG_COMMAND_EXECUTE in background

Hi All,
We use function module SXPG_COMMAND_EXECUTE with a custom command we defined in SM69 to move files in unix (mv command).
The function module call has worked fine for almost a year and recently we have been seeing an error (BT616) in our job lob (SM37) when the program is run in background. We have not been able to reproduce the error in foreground mode and it seems to be occuring only periodically in the background. (The appropriate SAP authorization objects where assigned to the batch job ID and the steps on the batch job.) We are in the process of setting up the trace flag and performing analysis on the trace log via ST11 to help identify the issue.
After perform analysis on SXPG_COMMAND_EXECUTE, the error is occurring when calling function module SAPXPG_END_XPG for exception 2, system failure, yet function module SAPXPG_END_XPG does not exist. I assume this is a program at the operating system level and is just a signature of the parameters to be passed to the operating system program.
Below is part of the SAP function module SXPG_COMMAND_EXECUTE that is failing.
* Now we have to wait for the termination of the external
* command if the caller wants us to.
    IF TERMINATIONWAIT = 'X'.
      CALL FUNCTION 'SAPXPG_END_XPG'
        DESTINATION DESTINATION
        IMPORTING   EXITSTAT = STATUS
                    EXITCODE = EXITCODE
        TABLES      LOG      = LOG
        EXCEPTIONS COMMUNICATION_FAILURE = 1 MESSAGE MSG
                    SYSTEM_FAILURE        = 2 MESSAGE MSG.
I performed a where used on function module SXPG_COMMAND_EXECUTE, and most of SAP programs call the function module with the parameter TERMINATIONWAIT = 'X', so I assume we should pass X as well.
Any ideas on what could be causing this issue?
Mike Vondran

I also remember I have this kind of issue, as I have some UNIX script at OS( UNIX) level . The problem was with the ID , as it dont have proper authorization at OS level ( UNIX ) . Please check this ID authorization. This could be the one of reasons if youre sure from SAP standpoint.
Hope thisll give you some guide line..
Thanks
Bye

Error while calling function module to start form

Similar Messages

Maybe you are looking for