Error while checking for update

Lately, when I sync my iPad to iTunes on my mac, when I click on "Check for Updates" I get the following error message...
"iTunes could not check for an update to the carrier settings for your iPad. An unknown error occurred (1631).
Make sure your network settings are correct and your network connection is active, or try again"...
The network is fine, both on the mac and the iPad... And the phrase "...could not check for an update to the carrier settings" doesn't even seem to make sense???? It used to work but this just started recently and now the error pops up every time I try... My iPad is WiFi + 3G but I've never activated the 3G coverage...
Any thoughts??? thanks... bob..

I hadn't seen that error either until just recently... I found this post,
http://discussions.apple.com/message.jspa?messageID=12635600
where folks with the same problem have appeared to have found an answer...
All I did was toggled my Cellular Data switch from OFF (where it always was before) to ON for a few seconds... That is not to say I signed up for AT&T service... I just toggled the Cellular Data switch but I was still running in WiFi mode as always...
And it worked... Message gone... Other folks on that same post talk about inserting non-active SIM cards into their iPads to clear the error??? Don't know about that but the Cellular Data from default OFF, to ON and then back to OFF has, for the moment anyway, cleared the message for me...
bob...

Similar Messages

App Store error while checking for updates

I noticed recently that there hasn't been any updates for OS X Mavericks so I decided to manually check for one. When I did so, I got this error while attempting to check for an update:
There's not much else to explain. The only other thing that has been getting really weird on my computer recently is my keychain. It keeps forgeting the wifi password for my house saying "Keychain 'System' could not be found to store B7F3D". It also keeps forgeting my icloud email password. Other than that, there is nothing else wrong.
Thanks for any help!
-Mpconnel

It seems it fixed on its own. Everything is working properly now.

HT1338 when I click on software update it says ''An error occurred while checking for updates.'' Why does it say that?

So I bought a Powerbook G4 from a pawn shop and yes, I did check to see if it was still good. everything works fine but I need an update because I have OS X 10.3. So I connect to the internet and then I click on ''Software Update'' and I wait. But then a message opens saying ''An error occurred while checking for updates'' And I don't know why. HELP!!!

Something temporarily wrong with your internet connection?
Be aware that this is a very large file to download, it needs a strong consistent internet connection.
Have the iPhone on the charger cable too.
In the meantime read the threads in this forum about the visibility item and some other possible issues on the 4 and 4S (although a large number of people have these issues, it is still a minor percentage, but anyhow, be aware).

"software update" "An error occurred while checking for updates"

When I click on "Software Update", an error results, "An error occurred while checking for updates". It is definitely connected to the internet. I was gifted a G5 and I installed a new hard drive and loaded the OS, OS X 10.3.5. That version of Safari does not display pages correctly. E.g., support.apple.com/downloads just clocks on the righthand side of the page.
Because cannot access that link, cannot manually update the OS - I was thinking this version is "old" and as a result, unable to connect to apple's update server. Thanks.

Thanks, I upgraded with your info.
Ultimately, I am trying to access mail.google.com but receiving the following error with opera v9.5.x: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
Safari gives the following: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
I can access ask.com and using opera to type this response.

Problem while checking for updates in Intex Cloud FX

I followed the steps to check for updates: https://support.mozilla.org/en-US/kb/how-do-i-check-firefox-os-updates-and-install-them?esab=a&as=aaq
But every time I do that I get an error saying "There was an error when checking for updates."
I am connected to WiFi, and I tried the solution provided here: https://support.mozilla.org/en-US/questions/967817, but it did not work.
Also, the OS Version says Intex_Cloud_FX_V07

Yes, the Intex website does say that the phone has v1.3 installed. (http://www.intexmobile.in/product_detail.aspx?PID=191&PCatID=3#)
But in the settings it says that the software version installed is '''Intex_cloud_FX_V07''', and the update channel is '''release-spreadtrum'''. Does it mean the Intex uses its customized version of the OS? If so, how do I switch to the ''un-customized'' version.

While checking for updates

While trying to check for updates in the Mac store I get this message.
Error has occurred. The request has timed out. When I click ok its says no updates avalable.

Hi Wayne, see if either of these help...
Anonymous
Post subject: NSURLErrorDomain error -1100 in OS X 10.8
If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
http://x704.net/bbs/viewtopic.php?f=12&t=6130
I was recently trying to upgrade to mountain lion through the app store. I have unreliable Internet from a cable company whom I will not name, but we all know who they are. My Internet dropped while downloading the upgrade. Once I went through the notorious unplug the modem/router and plugged it back in to gain Internet connectivity again, I could not resume. No matter what I did, the app store kept displaying "an error occurred." I am hoping that those with the same issue read this first to save them hours of skimming through the Internet to find a solution. Here are the steps to take:
1. Make sure you have reestablished Internet connection
2. Chances are you got frustrated when you tried to resume/unpause the download and clicked the "X" to the left. If so, select the "Store" drop-down menu from the App Store and select "View My Account." There should be an option to unhide your purchase. You know what to do.
3. There is also an option to reset all warnings for buying and downloading under "View My Account." Do this, click "Done," sign out of the App Store and quit the App Store.
4. Open the Preferences in safari and select Privacy. Select "Remove All Website Data." Just do it.
5. Launch the app store and sign in.
6. Now, if you "Check for Unfinished Downloads" everything works peachy.
I hope this helps. Not much I can do for your Internet connection though.
JonEz15...
https://discussions.apple.com/thread/4697970?tstart=120

Firefox insists on freezing computer while checking for updates I have said not to check

Firefox repeatedly checks for updates of disabled addons. I have DO NOT CHECK FOR UPDATES enabled, but . . . WTF FF ignores my options as if they weren't entered. I've done all I can.
I'm pretty tired of trying to open FF and being delayed while FF pleasures itself at my expense.

Yes, the Intex website does say that the phone has v1.3 installed. (http://www.intexmobile.in/product_detail.aspx?PID=191&PCatID=3#)
But in the settings it says that the software version installed is '''Intex_cloud_FX_V07''', and the update channel is '''release-spreadtrum'''. Does it mean the Intex uses its customized version of the OS? If so, how do I switch to the ''un-customized'' version.

IPod acknowledged by PC but only charges while checking for updates

This may very well be a newbie question, but I have not been able to find any help online. I plug in my ipod to charge, and everything acts normal - if itunes is open, it checks for new songs and updates it, etc, while charging. The only problem is that it does not continue to charge after it checks for updates. As soon as it says it is ok to eject in itunes, the ipod reverts back to normal and after a while just shuts itself off.
I have tried plugging it in the computer while itunes is closed as well, and it does something very similar. It didn't always used to be this way - Sometimes I would need to fiddle with it, but I could get it to charge.
Any help is appreciated =)
5th gen video Windows 2000

The USB is turning off after it updates and Ejects.
Right click on My Computer and select Properties, Hardware, Device Manager.
Click on Universal Serial Bus.
Right Click on USB Root Hub then Properties.
In the box, select the Power Management tab.
Deselect Allow the computer to turn off power to this device to save power.
Do this for all the USB Root hubs which may show up.

Error in Check for updates

When I do a check for updates it find an update available but when I try and get it I get an error.
An error occurred downloading updates
Server redirected too many tiimes (20)
Any ideas?

Is there an OS-internal firawall (WinXP)?
check your connection options for:
connection settings, security settings, etc.
Open the doors as wide as possible in order to check it out.
It must have to do with your machine, because for me it works fine in the company and at home too.
... and I have to be honestly - my latin ends here.
Andre

Error occuring while checking for updates in windows 7

i have tried your solution of subinacl but still an error ocurred while checking updates in windows 7.how to i solve this problem

Hi,
You can try windows update rediness tool, pick the correct version you are running.
System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [May 2014]
System Update Readiness Tool for Windows 7 (KB947821) [May 2014]
If it didn't help, please try to reset update component:
http://support2.microsoft.com/kb/971058

Officejet 6700 error while searching for updates: 'Printer could not connect to server'

I recently purchase the Officejet 6700 Premium. While setting the printer up, I received the error 'The printer could not connect to the server.' I first received this while the printer was searching for updates. I later received the same error while trying to set up ePrint from my computer.
The printer is connected through my wireless router. All other print services function normally. It is connected to the network, and I have printed several times over the wireless network.
Though I don't think it matters, since the on-board print set-up gave me the error, I run Windows 7 64-bit on my computer.
Thanks for any help!

What is the IP address of the printer? What is the make and model of the router that you use in the wireless set up? Is the router firmware up to date?
I would first try power cycling the router and the printer. Turn off/unplug the router and then power down the printer. Then plug the router back in and wait for it to be fully up and functioning before turning the printer back on. After you have both pieces of equipment back on and functioning attempt to connect to web services again.
If still having problems I would attempt to set a static DNS on the printer through the embedded web server (EWS) by entering the printer's IP address into the address bar of a browser on a computer.
Once that computer displays that page click on the Network tab.
Then look in the column to the left and find the Wireless section
Click on IPv4
Then on that page look at the 2nd section that is labeled DNS Address configuration
Change the radio button to the manual option
Then for the manual preferred fill it out and make sure it reads 8.8.8.8
Secondary should be set to 8.8.4.4
Then hit Apply
Read the next screen carefully. That message with the "OK" button below it is one that states to click that button to undo the changes you just made. Just navigate away from that page by clicking on another tab.
Then reattempt to connect to web services.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

HT4623 what is wrong when my iphone says, an error occurred while checking for updates

what is wrong with my iphone,when i try to make software updates, i get a error message

Try rebooting your iPad and then see if you have any success updating.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Error When Check for Updates

An error has occurred the operation couldn't be completed nsurlerrordomain error 1012
This began happening after the May 15 OS X Update via the Mac App Store. Other/similar discussions talk about having an antivirus installed (Avast or Kaspersky or other) and their solution was to disable their anti-virus. I do not have an antivirus installed, nor do I recall anything else been installed since the last OS update via the Mac App Store.

It's a server issue. You'll have to wait for Apple to fix it.

When I try to check for updates, an error message appears with no details. How do I get and check the updates on my new intex cloud fx phone?

I have a new Intex Cloud Fx phone. In this, I go to 'Device in formation' and try to update the device by pressing update now, I get an error message that says 'an error occurred while checking for updates'. Also, it does not respond to the' last updated' command. When I press 'more device information' I can see’ OS version Intex_Cloud_FX_V07’. I have tried all kinds of procedures suggested on the net and elsewhere but have not succeeded in updating my phone, so far. This includes resetting the phone. I am using a Wi-fi connection. It seems that quite a few persons are facing this problem. There have been suggestions ranging from 'there is a bug' to 'there are no updates'. So, the problem persists, with no end in sight. I feel Mozilla should look at it.

Hi!
Thanks for contacting us today! I understand you are having issues with updating, and using the device.
I believe that we are aware of the update issue however, it is ultimately the carrier/ manufacturer to provide updates. Please contact the respective company for assistance.
As for device using, and things not working. Please provide us with more details. (Note: the bug may have already been fixed, but is available in a later update).
Thanks!

Error 80072EE6 when checking for updates

Hi, I have a Windows Server 2008 R2 box that shows an error when Checking for updates.
When I go to Windows update and push "Check for updates" I get a message saying:
Error(s) found: Code 80072EE6
I checked that download.windowsuodate.com is reachable
Any ideas?

I tried installing MSXML 4.0 SP1 on the machine. But it didn't solve the issue.
Below you can find the log from today after I checked for update? I did a check for updates at 13:39. Below that I added a few other log lines before that as well.
2010-04-20 13:39:54:374 932 1304 AU Triggering AU detection through DetectNow API
2010-04-20 13:39:54:374 932 1304 AU Triggering Online detection (interactive)
2010-04-20 13:39:54:374 932 9ec AU #############
2010-04-20 13:39:54:374 932 9ec AU ## START ## AU: Search for updates
2010-04-20 13:39:54:374 932 9ec AU #########
2010-04-20 13:39:54:374 932 9ec AU <<## SUBMITTED ## AU: Search for updates [CallId = {859EE30D-0304-4464-AE74-DE01E5B0F36C}]
2010-04-20 13:39:54:374 932 1320 Agent *************
2010-04-20 13:39:54:374 932 1320 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-04-20 13:39:54:374 932 1320 Agent *********
2010-04-20 13:39:54:374 932 1320 Agent * Online = Yes; Ignore download priority = No
2010-04-20 13:39:54:374 932 1320 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2010-04-20 13:39:54:374 932 1320 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2010-04-20 13:39:54:374 932 1320 Agent * Search Scope = {Machine}
2010-04-20 13:39:54:374 932 1320 Setup Checking for agent SelfUpdate
2010-04-20 13:39:54:374 932 1320 Setup Client version: Core: 7.3.7600.16385 Aux: 7.3.7600.16385
2010-04-20 13:39:54:374 932 1320 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-04-20 13:39:54:389 932 1320 Misc Microsoft signed: Yes
2010-04-20 13:39:54:389 932 1320 Misc WARNING: WinHttp: WinHttpCrackUrl failed. error 0x80072ee6
2010-04-20 13:39:54:389 932 1320 Misc WARNING: WinHttp: Initialize failed with 0x80072ee6
2010-04-20 13:39:54:389 932 1320 Misc WARNING: WinHttp: WinHttpCrackUrl failed. error 0x80072ee6
2010-04-20 13:39:54:389 932 1320 Misc WARNING: WinHttp: Initialize failed with 0x80072ee6
2010-04-20 13:39:54:389 932 1320 Misc WARNING: WinHttp: WinHttpCrackUrl failed. error 0x80072ee6
2010-04-20 13:39:54:389 932 1320 Misc WARNING: WinHttp: Initialize failed with 0x80072ee6
2010-04-20 13:39:54:389 932 1320 Misc WARNING: WinHttp: WinHttpCrackUrl failed. error 0x80072ee6
2010-04-20 13:39:54:389 932 1320 Misc WARNING: WinHttp: Initialize failed with 0x80072ee6
2010-04-20 13:39:54:389 932 1320 Misc WARNING: DownloadFileInternal failed for AGR-SRV-WSUS/selfupdate/wuident.cab: error 0x80072ee6
2010-04-20 13:39:54:389 932 1320 Setup WARNING: SelfUpdate check failed to download package information, error = 0x80072EE6
2010-04-20 13:39:54:389 932 1320 Setup FATAL: SelfUpdate check failed, err = 0x80072EE6
2010-04-20 13:39:54:389 932 1320 Agent * WARNING: Skipping scan, self-update check returned 0x80072EE6
2010-04-20 13:39:54:389 932 1320 Agent * WARNING: Exit code = 0x80072EE6
2010-04-20 13:39:54:389 932 1320 Agent *********
2010-04-20 13:39:54:389 932 1320 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-04-20 13:39:54:389 932 1320 Agent *************
2010-04-20 13:39:54:389 932 1320 Agent WARNING: WU client failed Searching for update with error 0x80072ee6
2010-04-20 13:39:54:389 932 860 AU >>## RESUMED ## AU: Search for updates [CallId = {859EE30D-0304-4464-AE74-DE01E5B0F36C}]
2010-04-20 13:39:54:389 932 860 AU # WARNING: Search callback failed, result = 0x80072EE6
2010-04-20 13:39:54:389 932 860 AU # WARNING: Failed to find updates with error code 80072EE6
2010-04-20 13:39:54:389 932 860 AU #########
2010-04-20 13:39:54:389 932 860 AU ## END ## AU: Search for updates [CallId = {859EE30D-0304-4464-AE74-DE01E5B0F36C}]
2010-04-20 13:39:54:389 932 860 AU #############
2010-04-20 13:39:54:389 932 860 AU Successfully wrote event for AU health state:0
2010-04-20 13:39:54:389 932 860 AU AU setting next detection timeout to 2010-04-20 16:39:54
2010-04-20 13:39:54:389 932 860 AU Successfully wrote event for AU health state:0
2010-04-20 13:39:54:389 932 860 AU Successfully wrote event for AU health state:0
2010-04-20 13:39:59:397 932 1320 Report REPORT EVENT: {741C8C46-3179-401C-A2F1-1697349B6F0E} 2010-04-20 13:39:54:389+0200 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 1 80072ee6 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80072ee6.
2010-04-20 13:39:59:397 932 1320 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2010-04-20 13:39:59:397 932 1320 Report WER Report sent: 7.3.7600.16385 0x80072ee6 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2010-04-20 13:39:59:397 932 1320 Report CWERReporter finishing event handling. (00000000)
Part of the log before that:
2010-04-20 12:41:32:654 932 590 PT WARNING: PTError: 0x80072ee6
2010-04-20 12:41:32:654 932 590 PT WARNING: Initialization failed for Protocol Talker Context: 0x80072ee6
2010-04-20 12:41:32:654 932 590 Report WARNING: Reporter failed to upload events with hr = 80072ee6.
2010-04-20 12:47:35:027 932 9ec AU #############
2010-04-20 12:47:35:027 932 9ec AU ## START ## AU: Search for updates
2010-04-20 12:47:35:027 932 9ec AU #########
2010-04-20 12:47:35:027 932 9ec AU <<## SUBMITTED ## AU: Search for updates [CallId = {EC4FD2F6-5BB1-440D-84A9-FB1574352B9F}]
2010-04-20 12:47:35:027 932 590 Agent *************
2010-04-20 12:47:35:027 932 590 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-04-20 12:47:35:027 932 590 Agent *********
2010-04-20 12:47:35:027 932 590 Agent * Online = Yes; Ignore download priority = No
2010-04-20 12:47:35:027 932 590 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2010-04-20 12:47:35:027 932 590 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2010-04-20 12:47:35:027 932 590 Agent * Search Scope = {Machine}
2010-04-20 12:47:35:027 932 590 Setup Checking for agent SelfUpdate
2010-04-20 12:47:35:043 932 590 Setup Client version: Core: 7.3.7600.16385 Aux: 7.3.7600.16385
2010-04-20 12:47:35:043 932 590 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-04-20 12:47:35:059 932 590 Misc Microsoft signed: Yes
2010-04-20 12:47:35:059 932 590 Misc WARNING: WinHttp: WinHttpCrackUrl failed. error 0x80072ee6
2010-04-20 12:47:35:059 932 590 Misc WARNING: WinHttp: Initialize failed with 0x80072ee6
2010-04-20 12:47:35:059 932 590 Misc WARNING: WinHttp: WinHttpCrackUrl failed. error 0x80072ee6
2010-04-20 12:47:35:059 932 590 Misc WARNING: WinHttp: Initialize failed with 0x80072ee6
2010-04-20 12:47:35:059 932 590 Misc WARNING: WinHttp: WinHttpCrackUrl failed. error 0x80072ee6
2010-04-20 12:47:35:059 932 590 Misc WARNING: WinHttp: Initialize failed with 0x80072ee6
2010-04-20 12:47:35:059 932 590 Misc WARNING: WinHttp: WinHttpCrackUrl failed. error 0x80072ee6
2010-04-20 12:47:35:059 932 590 Misc WARNING: WinHttp: Initialize failed with 0x80072ee6
2010-04-20 12:47:35:059 932 590 Misc WARNING: DownloadFileInternal failed for AGR-SRV-WSUS/selfupdate/wuident.cab: error 0x80072ee6
2010-04-20 12:47:35:059 932 590 Setup WARNING: SelfUpdate check failed to download package information, error = 0x80072EE6
2010-04-20 12:47:35:059 932 590 Setup FATAL: SelfUpdate check failed, err = 0x80072EE6
2010-04-20 12:47:35:059 932 590 Agent * WARNING: Skipping scan, self-update check returned 0x80072EE6
2010-04-20 12:47:35:074 932 590 Agent * WARNING: Exit code = 0x80072EE6
2010-04-20 12:47:35:074 932 590 Agent *********
2010-04-20 12:47:35:074 932 590 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-04-20 12:47:35:074 932 590 Agent *************
2010-04-20 12:47:35:074 932 590 Agent WARNING: WU client failed Searching for update with error 0x80072ee6
2010-04-20 12:47:35:074 932 13e8 AU >>## RESUMED ## AU: Search for updates [CallId = {EC4FD2F6-5BB1-440D-84A9-FB1574352B9F}]
2010-04-20 12:47:35:074 932 13e8 AU # WARNING: Search callback failed, result = 0x80072EE6
2010-04-20 12:47:35:074 932 13e8 AU # WARNING: Failed to find updates with error code 80072EE6
2010-04-20 12:47:35:074 932 13e8 AU #########
2010-04-20 12:47:35:074 932 13e8 AU ## END ## AU: Search for updates [CallId = {EC4FD2F6-5BB1-440D-84A9-FB1574352B9F}]
2010-04-20 12:47:35:074 932 13e8 AU #############
2010-04-20 12:47:35:074 932 13e8 AU Successfully wrote event for AU health state:0
2010-04-20 12:47:35:074 932 13e8 AU AU setting next detection timeout to 2010-04-20 15:47:35
2010-04-20 12:47:35:074 932 13e8 AU Successfully wrote event for AU health state:0
2010-04-20 12:47:35:074 932 13e8 AU Successfully wrote event for AU health state:0
2010-04-20 12:47:40:066 932 590 Report REPORT EVENT: {B7F9094C-3FE2-4629-9B1A-1E4DB1DB51F3} 2010-04-20 12:47:35:059+0200 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 1 80072ee6 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80072ee6.
2010-04-20 12:47:40:129 932 590 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2010-04-20 12:47:40:129 932 590 Report WER Report sent: 7.3.7600.16385 0x80072ee6 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2010-04-20 12:47:40:129 932 590 Report CWERReporter finishing event handling. (00000000)
2010-04-20 12:56:45:669 932 590 PT WARNING: PTError: 0x80072ee6
2010-04-20 12:56:45:669 932 590 PT WARNING: Initialization failed for Protocol Talker Context: 0x80072ee6
2010-04-20 12:56:45:669 932 590 Report WARNING: Reporter failed to upload events with hr = 80072ee6.
2010-04-20 13:08:56:682 932 590 PT WARNING: PTError: 0x80072ee6
2010-04-20 13:08:56:682 932 590 PT WARNING: Initialization failed for Protocol Talker Context: 0x80072ee6
2010-04-20 13:08:56:682 932 590 Report WARNING: Reporter failed to upload events with hr = 80072ee6.
2010-04-20 13:08:56:682 932 590 Report WARNING: Discarding a batch of 1 events because they have expired.
2010-04-20 13:08:56:698 932 590 PT WARNING: PTError: 0x80072ee6
2010-04-20 13:08:56:698 932 590 PT WARNING: Initialization failed for Protocol Talker Context: 0x80072ee6
2010-04-20 13:08:56:698 932 590 Report WARNING: Reporter failed to upload events with hr = 80072ee6.
2010-04-20 13:23:17:734 932 590 PT WARNING: PTError: 0x80072ee6
2010-04-20 13:23:17:734 932 590 PT WARNING: Initialization failed for Protocol Talker Context: 0x80072ee6
2010-04-20 13:23:17:734 932 590 Report WARNING: Reporter failed to upload events with hr = 80072ee6.
Is this what you meant?

Error while checking for update

Similar Messages

Maybe you are looking for