Error while creating DB Adapter in OVD

when I try to create a DB adapter in OVD for Oracle Database 11g, I always get an error "java.lang.reflect.InvocationTargetException" on pressing Validate Connection.
I have checked all the values, they are correct. I have installed the ojdbc drivers using the Manage Server libraries.
Has anyone faced similar problem before?
Regards,
Monica

What steps did you followed to create the OVD DB adapter. Check with the following documentation and it should be good to go.
http://download.oracle.com/docs/cd/E12839_01/oid.1111/e10276/ovd_adapt.htm

Similar Messages

  • MBean not found error while creating Resource Adapter

    Hi,
    During the post installation configuration of Oracle Identity Manager, I had to create Resource Adapter as mentioned in the steps below. In the final step, when I click OK, I’m getting an error message “An error has occurred. MBean not found” (I had created a new oc4j container called oc4j_oim under which this is being done). Complete error message displayed is pasted at the end fyi. Kindly suggest a workaround for this issue.
    Steps followed:
    Create the required Resource Adapter in Oracle Application Server as follows:
    a) Log on to the Application Server Control.
    b) From the View By list, select Application Servers.
    c) Click the server instance.
    d) On the page that is displayed, click Administration.
    e) Click Enterprise Messaging, and then click Database Persistence. The JMS connectors for
    the Oracle Application Server instance that are currently configured for use with database
    persistence JMS providers are listed.
    f) Click Deploy.
    g) In the Resource Adapter Module Name field, enter oimOJMSRA
    h) Select Add a new resource provider to be used by this connector.
    i) In the Resource Provider Name field, enter oimOJMSRP
    j) From the Datasource JNDI Location list, select jdbc/xlXADS.
    k) Click OK.
    Detailed Error Message:
    oracle.sysman.ias.studio.sdk.IASRuntimeException: MBean not found at oracle.sysman.ias.studio.sdk.SDKJMXUtil.queryName(SDKJMXUtil.java:141) at oracle.sysman.ias.studio.oc4j.jms.JMXDeployDbProviderAdminBean.deployDBProviderAndConfigure(JMXDeployDbProviderAdminBean.java:173) at oracle.sysman.ias.studio.oc4j.jms.DeployDbProviderHelper.deployDBProvider(DeployDbProviderHelper.java:242) at oracle.sysman.ias.studio.oc4j.jms.DeployDbProviderHelper.handleEvent(DeployDbProviderHelper.java:127) at oracle.sysman.ias.studio.sdk.AbstractController.handleEvent(AbstractController.java:769) at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:378) at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:765) at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:283) at oracle.sysman.ias.studio.app.StudioConsole.doGet(StudioConsole.java:385) at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source) at javax.servlet.http.HttpServlet.service(HttpServlet.java:763) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at oracle.sysman.ias.studio.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:75) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15) at oracle.sysman.ias.studio.app.MultipleJVMFilter.doFilter(MultipleJVMFilter.java:85) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17) at oracle.sysman.ias.studio.app.PostLogonFilter.doFilter(PostLogonFilter.java:80) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17) at oracle.sysman.ias.studio.app.ShortHostnameRedirectFilter.doFilter(ShortHostnameRedirectFilter.java:68) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)
    S/W Details:
    Application Server 10.1.3.3.0
    Identity Manager 9.1.0.1
    Regards,
    CC

    Hi Srinivas,
    Please check ULS log for more useful information when this error occurs.
    Please also check if this issue could be reprodued in other libraries, if not, you can use the new library instead.
    Thanks
    Daniel Yang
    TechNet Community Support

  • Mbean Error While Creating Resource Adapter

    Hi,
    During the post installation configuration of Oracle Identity Manager, I had to create Resource Adapter as mentioned in the steps below. In the final step, when I click OK, I’m getting an error message “An error has occurred. MBean not found” (I had created a new oc4j container called oc4j_oim under which this is being done). Complete error message displayed is pasted at the end fyi. Kindly suggest a workaround for this issue.
    Steps followed:
    Create the required Resource Adapter in Oracle Application Server as follows:
    a) Log on to the Application Server Control.
    b) From the View By list, select Application Servers.
    c) Click the server instance.
    d) On the page that is displayed, click Administration.
    e) Click Enterprise Messaging, and then click Database Persistence. The JMS connectors for
    the Oracle Application Server instance that are currently configured for use with database
    persistence JMS providers are listed.
    f) Click Deploy.
    g) In the Resource Adapter Module Name field, enter oimOJMSRA
    h) Select Add a new resource provider to be used by this connector.
    i) In the Resource Provider Name field, enter oimOJMSRP
    j) From the Datasource JNDI Location list, select jdbc/xlXADS.
    k) Click OK.
    Detailed Error Message:
    oracle.sysman.ias.studio.sdk.IASRuntimeException: MBean not found at oracle.sysman.ias.studio.sdk.SDKJMXUtil.queryName(SDKJMXUtil.java:141) at oracle.sysman.ias.studio.oc4j.jms.JMXDeployDbProviderAdminBean.deployDBProviderAndConfigure(JMXDeployDbProviderAdminBean.java:173) at oracle.sysman.ias.studio.oc4j.jms.DeployDbProviderHelper.deployDBProvider(DeployDbProviderHelper.java:242) at oracle.sysman.ias.studio.oc4j.jms.DeployDbProviderHelper.handleEvent(DeployDbProviderHelper.java:127) at oracle.sysman.ias.studio.sdk.AbstractController.handleEvent(AbstractController.java:769) at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:378) at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:765) at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:283) at oracle.sysman.ias.studio.app.StudioConsole.doGet(StudioConsole.java:385) at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source) at javax.servlet.http.HttpServlet.service(HttpServlet.java:763) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at oracle.sysman.ias.studio.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:75) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15) at oracle.sysman.ias.studio.app.MultipleJVMFilter.doFilter(MultipleJVMFilter.java:85) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17) at oracle.sysman.ias.studio.app.PostLogonFilter.doFilter(PostLogonFilter.java:80) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17) at oracle.sysman.ias.studio.app.ShortHostnameRedirectFilter.doFilter(ShortHostnameRedirectFilter.java:68) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)
    S/W Details:_
    Application Server 10.1.3.3.0+
    Identity Manager 9.1.0.1+

    Hi Veera,
    Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
    zoneadm list -iv
    If zone1 or zone2 are not running then boot and configure them
    zoneadm -z <zone> boot
    zlogin -C <zone>
    After that you can continue to follow the step by step instructions at
    http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
    These may also help
    http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
    http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
    Regards
    Neil

  • Error while creating a Adaptive RFC Model

    Hi all,
    I am trying to create a Model using a Adaptive RFC Model, I assign a Model name and the logical system names, enter the details in SAP Logon Information for the Single server,here it gives me a Gateway error. What could be the issue here?
    NB: In the Host Name , I tried with both the Host name of the r/3 server and also with the SAProuter string ( as we have the server at other place) ,still it doesnt work. and I am able to login to the R/3 system from the SAPLogon GUI from my desktop normally.
    Is there any issue of the firewall related to this, if so whats the port number that should be opened so that i can connect to the r/3 system get the list of BAPIs present there into my Webdynpro application .
    Need help on this
    Regards,
    Vijay

    Hi Lohi n Gopi ,
    I have checked out with the your given suggestion of trying with the host name as well as  IP address and also typing all the details,without copy pasting the details . In both the cases it gave the " Connect to gateway failed " error mesg.
    But one intersting thing here that i observered when trying with hostname, IP address, or SAProuter string is as follows .
    <b>with IP address</b>
    <i>Connect to SAP gateway failed
    Connect_PM GWHOST="ipaddress",GWSERV=sapgw10,ASHOST="ipaddress",SYSNR=10
    LOCATION CPIC(TCP/IP) on local host
    ERROR      patner not reached(host "ipaddress",service=3310)</i>
    <b>with SAProuterString</b>
    <i>Connect to SAP gateway failed
    Connect_PM GWHOST="SAProuterString",GWSERV=sapgw10,ASHOST="SAProuterString",SYSNR=10
    LOCATION SAPRouter on " some HostName"
    ERROR      hostname unknown</i>
    <b>with HostName</b>
    <i>Connect to SAP gateway failed
    Connect_PM GWHOST="hostname",GWSERV=sapgw10,ASHOST="hostname",SYSNR=10
    LOCATION CPIC(TCP/IP) on local host
    ERROR      hostname "hostname " unknown</i>
    Is there any firewall port blocking issue here ?if so , whats the port that needs to be opened ?
    Appreciate your help.
    Thnks,
    NR

  • Error while creating a new connection in ODSM for OVD

    Hi all,
    I am getting the following error while creating a new connection in ODSM for OVD.
    Error log:
    [2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
    javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused by:
    =======
    java.lang.NoClassDefFoundError: Could not initialize class
    com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub
    at com.octetstring.vde.admin.services.client.ServerMgrServiceLocator.getVDEAdminService(ServerMgrServiceLocator.java:58)
    at oracle.ldap.odsm.model.ovd.APServerProxy.connect(APServerProxy.java:248)
    at oracle.ldap.odsm.model.ovd.APServerProxy.authenticateAs(APServerProxy.java:684)
    at oracle.ldap.odsm.model.ovd.APServerProxy.authenticate(APServerProxy.java:286)
    at oracle.ldap.odsm.model.ovd.APServerProxy.init(APServerProxy.java:216)
    at oracle.ldap.odsm.model.ovd.APServerProxy.<init>(APServerProxy.java:198)
    at oracle.ldap.odsm.model.ovd.OVDRoot.connectOVD(OVDRoot.java:185)
    at oracle.ldap.odsm.ui.common.Connection.connect(Connection.java:120)
    at oracle.ldap.odsm.ui.common.Visit.createConnection(Visit.java:663)
    at oracle.ldap.odsm.ui.common.Login.saveChanges(Login.java:215)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.sun.el.parser.AstValue.invoke(Unknown Source)
    at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
    at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1245)
    at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:812)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:292)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
    ... 28 more
    How to resolve this issue.Pls suggest me.
    Regards,
    -Deena.

    Hi Deena,
    This error:
    "[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
    javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub"
    is known issue
    Go to metalink, article: Unable To Connect To OVD 11g Webinterface Using ODSM. [ID 1282757.1]
    You need to apply that patch.
    I hope this helps,
    Thiago Leoncio.

  • Error while creating adaptive web service model

    Hi All,
    There is a requirement where the webdynpro application is deployed in backend system while the web service is created in the front end system. We need to connect to this web service and execute it in our webdynpro application to get response. For this we have created Logical Destination in backend system that points to the web service in the front end system.
    The web service, when tested directly through Web Services Navigator, works fine.
    Here, while creating an Adaptive Web Service Model in the webdynpro application, after giving name, package, destination name etc when I enter wsdl url and click on Next I am getting an error as u201CError in downloading the WSDL fileu201D.
    The error log says u201Ccom.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException:Exception on creation of service metadata for WSDL URLu201D.
    Even if I try to create model with url only by selecting u201CNo Logical Destinationsu201D, error remains the same.
    What may be the reason for this and possible solution?
    Appreciate an early response.
    Regards,
    Mitali

    Hi
    Plesae go thriugh the Wiki and the pdf file
    https://wiki.sdn.sap.com/wiki/display/WDJava/FAQ-Models-AdaptiveWebService
    https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b2bc0932-0d01-0010-6d8e-cff1b2f22bc7&overridelayout=true
    Thanks
    Susmita

  • Error while creating a new folder in resource view of workbench.

    hi
    I am getting this error while creating a new folder from the resources view.
    Please help me in this regard.
    !ENTRY com.adobe.repository.ui.eclipse.forms 4 0 2009-02-19 18:18:36.340
    !MESSAGE REP-001-011: Problem creating a resource folder
    !STACK 0
    com.adobe.repository.ui.eclipse.IDERepositoryException: com.adobe.repository.bindings.dsc.client.ResourceRepositoryClientException: ALC-REP-106-000: Caught DSCException: ALC-DSC-012-000: com.adobe.idp.dsc.registry.ServiceNotFoundException: Service: RepositoryService not found.
    at com.adobe.repository.ui.eclipse.impl.dsc.IDERepositoryDSCImpl.createFolder(IDERepositoryD SCImpl.java:117)
    at com.adobe.repository.ui.eclipse.core.Repository.createFolder(Repository.java:522)
    at com.adobe.repository.ui.eclipse.actions.NewFolderActionDelegate.workspaceRun(NewFolderAct ionDelegate.java:91)
    at com.adobe.repository.ui.eclipse.actions.WorkspaceActionDelegateRunner$1.run(WorkspaceActi onDelegateRunner.java:76)
    at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1737)
    at com.adobe.repository.ui.eclipse.actions.WorkspaceActionDelegateRunner.run(WorkspaceAction DelegateRunner.java:83)
    at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:254)
    at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionI tem.java:539)
    at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:488)
    at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java :400)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:928)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3348)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2968)
    at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1930)
    at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1894)
    at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:422)
    at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
    at com.adobe.lcide.rcp.Application.run(Unknown Source)
    at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:78)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:92)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:68)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:400)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:177)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at org.eclipse.core.launcher.Main.invokeFramework(Main.java:336)
    at org.eclipse.core.launcher.Main.basicRun(Main.java:280)
    at org.eclipse.core.launcher.Main.run(Main.java:977)
    at org.eclipse.core.launcher.Main.main(Main.java:952)
    Caused by: com.adobe.repository.bindings.dsc.client.ResourceRepositoryClientException: ALC-REP-106-000: Caught DSCException: ALC-DSC-012-000: com.adobe.idp.dsc.registry.ServiceNotFoundException: Service: RepositoryService not found.
    at com.adobe.repository.bindings.dsc.client.ResourceRepositoryClient.writeResource(ResourceR epositoryClient.java:920)
    at com.adobe.repository.ui.eclipse.impl.dsc.IDERepositoryDSCImpl.createFolder(IDERepositoryD SCImpl.java:114)
    ... 31 more
    Thanks
    Ullas

    Thanks Jasmin I did as you told and was able to create folder. But while installing the Event-Dsc and the workflow-dsc I am getting some internal error as given below.
    !ENTRY com.adobe.DSC_Admin_UI 4 4 2009-02-24 15:41:34.984
    !MESSAGE install of C:\Adobe\LiveCycle8.2\deploy\adobe-event-dsc.jar failed
    !STACK 0
    ALC-DSC-000-000: com.adobe.idp.dsc.DSCRuntimeException: Internal error.
    at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl._install(ComponentRegistr yImpl.java:456)
    at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl.install(ComponentRegistry Impl.java:254)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:64)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:615)
    at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
    at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doBMT(EjbTran sactionBMTAdapterBean.java:197)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EJSLocalStatelessEjbTransactionBMTAdapter_ 3af08fdf.doBMT(Unknown Source)
    at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:95)
    at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:109)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:115)
    at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:118)
    at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.invoke(AbstractMessageReceiv er.java:315)
    at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invokeCall(SoapSdkEndpoint. java:138)
    at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invoke(SoapSdkEndpoint.java :81)
    at sun.reflect.GeneratedMethodAccessor279.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:615)
    at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397)
    at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:186)
    at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:323)
    at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
    at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
    at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
    at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:454)
    at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
    at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:699)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:989)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:930)
    at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
    at com.adobe.idp.dsc.provider.impl.soap.axis.InvocationFilter.doFilter(InvocationFilter.java :43)
    at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java: 190)
    at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
    at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
    at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:761)
    at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:673)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:498)
    at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:464)
    at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.jav a:90)
    at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:744)
    at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1433)
    at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:100)
    at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink .java:465)
    at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink .java:394)
    at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:274)
    at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConn ectionInitialReadCallback.java:214)
    at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitia lReadCallback.java:113)
    at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionLi stener.java:152)
    at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:213)
    at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions(AbstractAsyncFuture.java:195)
    at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
    at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:195)
    at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:743)
    at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:873)
    at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1469)
    Caused by: java.lang.ClassNotFoundException: com.adobe.idp.event.bootstrap.EventBootstrapImpl
    at com.adobe.idp.dsc.DSContainerSearchPolicy.findClass(DSContainerSearchPolicy.java:178)
    at org.ungoverned.moduleloader.ModuleClassLoader.loadClass(ModuleClassLoader.java:161)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:561)
    at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl._install(ComponentRegistr yImpl.java:403)
    ... 70 more
    As I am using the trial version so I have isnatlled all the products Workbench, Server and the application server in the same machine. My System has 2GB Ram.
    Any help in this will be of great help
    Regards
    Ullas

  • Error while creating the HTTP client with destination GB_DPSRetrieve

    Hi All,
    It is an interface R/3 -->XI --> HTTP ( proxy to HTTP ).
    Please find the error log below and throw some light why the HTTP adapter is getting error -
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SOAP:Header>
    - <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
      <SAP:MessageClass>SystemError</SAP:MessageClass>
      <SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
      <SAP:MessageId>DC98499F-7E42-74F1-A41F-0017A4107EE6</SAP:MessageId>
      <SAP:RefToMessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:RefToMessageId>
      <SAP:TimeSent>2007-11-21T15:51:30Z</SAP:TimeSent>
    - <SAP:Sender>
      <SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">GovernmentGateway</SAP:Party>
      <SAP:Service>GGMailbox</SAP:Service>
      <SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
      </SAP:Sender>
    - <SAP:Receiver>
      <SAP:Party agency="" scheme="" />
      <SAP:Service>SAP_DEV_ERP2005</SAP:Service>
      <SAP:Interface namespace="http://sap.com/xi/HR">HR_GB_EFI_DPSretrieve</SAP:Interface>
      </SAP:Receiver>
      <SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
      </SAP:Main>
    - <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:QualityOfService>BestEffort</SAP:QualityOfService>
      </SAP:ReliableMessaging>
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT_DEST</SAP:Code>
      <SAP:P1>GB_DPSRetrieve</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while creating the HTTP client with destination GB_DPSRetrieve</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    - <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
    - <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
      <SAP:Engine type="BS">SAP_DEV_ERP2005</SAP:Engine>
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
      <SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
      <SAP:Info>3.0</SAP:Info>
      </SAP:Hop>
    - <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
      <SAP:Engine type="IS">is.00.lbsth-tb1ci</SAP:Engine>
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
      <SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
      <SAP:Info>3.0</SAP:Info>
      </SAP:Hop>
    - <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
      <SAP:Engine type="IS" />
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">HTTP</SAP:Adapter>
      <SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
      <SAP:Info />
      </SAP:Hop>
      </SAP:HopList>
    - <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Date>20071121</SAP:Date>
      <SAP:Time>155130</SAP:Time>
      <SAP:Host>lbsth-tb1ci</SAP:Host>
      <SAP:SystemId>XIS</SAP:SystemId>
      <SAP:SystemNr>00</SAP:SystemNr>
      <SAP:OS>Windows NT</SAP:OS>
      <SAP:DB>ORACLE</SAP:DB>
      <SAP:Language />
      <SAP:ProcStatus>023</SAP:ProcStatus>
      <SAP:AdapterStatus>000</SAP:AdapterStatus>
      <SAP:User>PISUPER</SAP:User>
      <SAP:TraceLevel>1</SAP:TraceLevel>
      <SAP:LogSeqNbr>000</SAP:LogSeqNbr>
      <SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
      <SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
      <SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
      <SAP:PipelineElementId>60C3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
      <SAP:PipelineService>PLSRV_CALL_ADAPTER</SAP:PipelineService>
      <SAP:QIdInternal />
      <SAP:CommitActor>X</SAP:CommitActor>
      <SAP:SplitNumber>0</SAP:SplitNumber>
      <SAP:NumberOfRetries>0</SAP:NumberOfRetries>
      <SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
      <SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
      <SAP:PlsrvExceptionCode />
      <SAP:EOReferenceRuntime type="TID" />
      <SAP:EOReferenceInbound type="TID" />
      <SAP:EOReferenceOutbound type="TID" />
      <SAP:MessageSizePayload>0</SAP:MessageSizePayload>
      <SAP:MessageSizeTotal>2918</SAP:MessageSizeTotal>
      <SAP:PayloadSizeRequest>0</SAP:PayloadSizeRequest>
      <SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
      <SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
      <SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
      <SAP:Reorganization>INI</SAP:Reorganization>
      <SAP:AdapterInbound>PLAINHTTP</SAP:AdapterInbound>
      <SAP:AdapterOutbound>IENGINE</SAP:AdapterOutbound>
      <SAP:InterfaceAction>INIT</SAP:InterfaceAction>
      <SAP:RandomNumber>15</SAP:RandomNumber>
      <SAP:AckStatus>000</SAP:AckStatus>
      <SAP:SkipReceiverDetermination />
      <SAP:Receiver_Agreement_GUID>24422A5646443F8E9D975D57A3EE8162</SAP:Receiver_Agreement_GUID>
      </SAP:RunTime>
    - <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.5</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.656</SAP:Timestamp>
      </SAP:RunTimeItem>
      </SAP:PerformanceHeader>
    - <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:TraceLevel>Information</SAP:TraceLevel>
      <SAP:Logging>Off</SAP:Logging>
      </SAP:Diagnostic>
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="T">SystemError message generated. Guid: DC98499F7E4274F1A41F0017A4107EE6</Trace>
      <Trace level="1" type="T">Error during execution of message : DC98499CA1EABEF1B4DD00110A63BF06</Trace>
      <Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): DC98499CA1EABEF1B4DD00110A63BF06</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      </SAP:Trace>
      </SOAP:Header>
    - <SOAP:Body>
      <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
      </SOAP:Body>
      </SOAP:Envelope>
    Regards,
    Kishore

    Hi,
    In the HTTP Receiver what is the Addressing Type used ? (URL Address or HTTP Destination).
    If its URL Addressing Type, check if right Authentication Type is used with valid values and for HTTP Addressing Type check this HTTP Client Create Error, it could be helpful.
    Also check if the Target system can be reached from the XI server to validate the configuration parameters.
    Regards,
    S.Santhosh Kumar

  • Error while creating PDF object

    We are using Adobe Interactive Forms with Guided Procedures.  Netweaver 7.0 SP14 (Dual stack Java & Abap).  All was working well it appears until we configured SSL for ADS - don't know for sure if this caused the problem but it is the only change we can identify around the time that our problems began.
    When we attempt to Create an Impersonalized Form we receive the following error -
    Cannot retrieve template structure: Execution ended in an unrecognized state
    When we attempt to test a callable object associated with an interactive form we receive -
    Error while creating PDF object: PDF object could not be created; object returned from ADS is null.
    In both cases the entries in the default trace log are the same -
    Service XMLFormService: Native process (PID=0) /usr/sap/UFD/DVEBMGS02/j2ee/os_libs/adssap/XMLFormService/bin/XMLForm.exe terminated abnormally with error code 134
    PDF object could not be created; object returned from ADS is null
    com.sap.caf.eu.gp.base.exception.EngineException: PDF object could not be created; object returned from ADS is null
    at com.sap.caf.eu.gp.model.iforms.adapter.pdf.AdobePDFAdapter.createInstanceDocument(AdobePDFAdapter.java:542)
    at com.sap.caf.eu.gp.model.iforms.preproc.FormPreprocessor.execute(FormPreprocessor.java:507)
    Like I mentioned earlier this functionality was working successfully in our environment at one time.
    Any guidance in this matter would be greatly appreciated.
    Thanks,
    Joe

    Joe,
    If you originally configured ADS without SSL, I would recommend going back through the ADS Configuration Guide for your NetWeaver stack and make sure all the necessary changes for SSL were made.  I've seen another case where a step was missed in SSL configuration for ADS which caused a form to error.
    If everything looks good based on your SSL configuration, I would recommend creating an OSS Note.
    -Matt

  • Error while creating model classes, operation aborted in NWDS

    Hi All,
    When i select Adaptive rfc 2 model  and then search for the RFC,  when i select RFC and click on next i get an error while importing :
    Error while creating model classes, operation aborted.
    It is working fine in visual composer and i have activated function module, RFC but getting same error. It is also working in web service navigator also.
    Can any one help me out??
    Regards,
    Pradeep kumar
    Edited by: pradeep_546 on Feb 17, 2011 9:35 PM
    Edited by: pradeep_546 on Feb 17, 2011 9:36 PM
    Edited by: pradeep_546 on Feb 17, 2011 9:37 PM

    Hai guys thanks for reply
    Tushar,
    I am using NWDS 7.2, ce7.2 server, ECC 6.0.
    Amit,
    I have tested the JCO destinations they are working fine and i created a new pair of JCO destinations but unable to import the Adaptive RFC2 Model gives same error but Adaptive webservices are working fine in my NWDS7.2
    Deepak,
    I am unable to create model in other projects also.
    I have sufficient amount of memory in my drive.
    I have imported the DC to other NWDS but it gives same error.
    Thanks for all,
    Regards,
    Pradeep Kumar G
    Edited by: pradeep_546 on Feb 18, 2011 3:05 PM

  • Error in creating AQ Adapter for SYS.ANYDATA Queue  Exception : 1w

    Hi everyone,
    I'm trying to run AQ Adapter wizard for a SYS.ANYDATA type of queue in my composite application with Oracle Mediator. According to the oracle documentation, it is recommended to set SchemaValidation property to false before running this wizard to avoid further validation exceptions. Here is the statement in oracle documentation :
    Note:
    When creating an SOA composite that uses Oracle AQ Adapter with ADT data type if the SchemaValidation property is set to TRUE, then any NULL data type in dequeue message will result in AQ_INVALID_PAYLOAD error further resulting in message rejection. To avoid message rejection, you must set the SchemaValidation property to false.
    [http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10231/adptr_aq.htm|http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10231/adptr_aq.htm]
    However, I can't find where should I set this property in my composite project. I can't find any sample of AQ Adapter for SYS.ANYDATA type of queue. I'm getting this exception while creating AQ Adapter partner link:
    "Error while getting Oracle object xml schema definition for queue table xxx_qt Exception :1 "
    "Error while writting wsdl file .... AQIn.wsdl Exception : null "
    The same post I found but no one has answered yet:
    [http://kr.forums.oracle.com/forums/thread.jspa?threadID=664494|http://kr.forums.oracle.com/forums/thread.jspa?threadID=664494]
    I will appreciate if someone can give me a sample on how to use SYS.ANYDATA queue using AQ Adapter.
    Thanks
    Edited by: user3788199 on Aug 29, 2009 1:36 AM
    Edited by: user3788199 on Aug 29, 2009 2:14 AM
    Edited by: user3788199 on Aug 29, 2009 2:17 AM

    I too had this issue, the error message regarding the CONNECT BY is misleading, the XML schema did give me a clue.
    Connect to the Oracle db using the same user as you are using through the AQ Adapter. Do a desc on the message table. This did bring up the columns, however when I clicked on Data on table, I got an error saying it couldn't access underlying data type. I then executed a grant all to object type under the owner of the object type to the AQ Adapter user.
    Came back to BPEL and went through the same steps, but did not get any error on clicking Finish on the Wizard.
    Hope this helps.
    Edited by: user4783399 on Oct 2, 2009 3:54 AM

  • Error while using DB Adapter in BPEL process

    Hi All,
    I am getting error while using DB Adapter in BPEL process
    java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 69 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:955) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:750) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 72 more
    I have created jndi from console which I have mentioned in DBAdapter and I have provided details of JNDI to DbAdapter in deployment.
    I am not able to solve this.
    Can you please let me know solution for this or provide me link for tutorial of DBAdapter for stored procdure call?

    did u deploy your dbadapter through console to the plan mentioned for deployment?

  • Error: while accessing an adaptive rfc 2 model

    Hi All,
    When i select Adaptive rfc 2 model and then search for the BAPI/FM , you find the one with green ones and also the yellow ones .I selected the Fm that shows with yellow triangle icon and when
    i do that i get an error :
    Error while creating model classes, operation aborted.
    Can any one help me out?
    Regards,
    Edited by: Deepa Tekumalla on May 14, 2009 4:16 PM

    Hi,
    Are you facing the issue for all function modules?
    Yellow icon is for not-released function modules and Green icon is for released function modules.
    But, the function module can be called irrespective of whether there is a green or yellow icon.
    Try releasing the function module at R/3 side.
    Regards,
    Vaibhav

  • Error while creating a recipe in plm..

    Hi every one,
    System throughing below error while creating a recipe.
    "Entries in status management Customizing are incorrect"
    kindly suggest.
    have a good day..
    regards,
    kirran

    Hi Kirran,
    Please see if you have defined a status scheme and assigned it to the recipe type. Before defining a status scheme, you must complete the one time IMG activity 'Collect Object Types and Assigned Attributes' under Recipe Development > Status Management. Then in the next node you define individual statuses and a scheme with transitions. For each status, you must define 'field value' for the field RCP_USAGE which is nothing but a value from Recipe Purposes customizing.
    Hope this helps.
    Regards,
    Rajeev

  • Error while creating a PO

    Hi all,
    I have got an error while creating a PO with an Internal Order. I am trying to post this PO against an Internal Order. The error message says that:
    User status BUDG is active (ORD 10034). When I click the perform assistant, it says that according to this status, transaction 'Material purchase order' is not allowed.
    Can somebody plss help me in this regards, I will assign points.
    Thank you,
    Sony

    What you enter in the Cost element master data is only for defaulting the cost center or order when you use that GL account.
    When you see a message  transction  requires an account assignment, you can enter the relevant cost center for which the cost is incurred.
    For your information, If an order has been marked as statistical, you can find it in KO02 change order > Control data. there may be  check box saying statistical. If it is not available, then, you can't make it statistical until, you make that field available for change for the order type. Usually orders of a particular type can be made as statistical, by providing a model order to the order type. In the model order you specify that it will be statistical.

Maybe you are looking for

  • Opening templates,  wrong language - need english

    I am opening templates in iAuthor and am getting the wrong language. I need english. Anyone have a tip of what I need to do in order to fix this? My lion OS is set with English as default. thanks in advance, Linda

  • Spry If question

    just wondering can you include a large block within a spry if, like this and it will only render if the case is true ? <div spry:if="dataFound"> <form id="form1" name="form1" method="post" action="" > <div id="optionTable" spry:region="dsOption dsMac

  • How to stop grouped users from seeing all users?

    I have several users organized into groups, and would like to make is so that users can't see people outside of their group (or groups). No matter how I tweak permissions, all users get to see every other user no matter what group they're in. That is

  • Pasting Pictures in htmlarea fields on Nightly 64bit builds

    I cannot paste a picture in servicesdesk pro from manageengine anymore. I was able to in earlier builds. but now any more. http://www.manageengine.com/products/service-desk/ It looks like I can not paste images in to the html area any more: .editor_b

  • Shutdown immediate hangs

    SunOS 5.8 Database version: 9.2.0.4.0 Customer shutdown database every night for backup the datafiles to disk. For your information, 2 weeks ago customer moved datafiles to a new disk. The stoppscript has worked for a week. And after a week the datab