Error while creating del document for an STO
All SAP Gurus,
recently we have done a upgradation from sap 4.7 to ecc 6.0. after thet While creating outbound delivery (doc type JF) against an STO, i am getting following error
"50001251 000000 document is incopmlete: You can not save the delivery."
where as i have thoroughly checked the STO and did not found anything.
detail of error is given below:-
Diagnosis
When the system checked whether saving delivery was
permitted, it determined that the requirements stored in
Define Incompletion Procedures for this document do not
allow this subsequent function.
System response
The system does not permit this subsequent function.
Procedure
o If this message appears during online processing, you
can edit the document by choosing Edit -> Log of
incomplete items.
o If the message appeared during background processing,
you can analyze the problem by regenerating the
delivery.
please help,
BKR
Hi Biplab,
For the error, Check SAP Note 429354, also you can refer the following links :
Re: Regarding Outbound Delivery for STPO
Re: Regarding Delivery for Stock Transport Purchase Orders
Re: error while cross company sock transfer
Similar Messages
-
Error while creating measurment documents for a counter (counter based strategy Plan)
Dear Experts
Pl suggest the possible solution for below case
I have a counter based preventive maintenance Plan of 100km, 200km,..... with op1,op2,..... respectively.
Now I have done maintenance for 600 km and going to enter another reading in IK11.
Here, system is giving error
Counter reading in doc. 251591 larger than in subsequent doc. 251585
Message no. IR171
Diagnosis
No counter overflow reading has been defined for the measuring point, and the counter reading that you have entered is larger than the one in the subsequent measurement document.
This is not allowed, since the counter is not marked as running backwards.
System Response
Processing will not be continued.
Procedure
Check your entries and the counter data of the measuring point.
screen shot for measurement document earlier created is asHi Akhilesh
okay . I have not found any error in my last and current reading date and time
screen shot is attached again here for ur reference
now, what thing I have to checked, pl suggest. -
Error while creating delivary document
Hi
i got error while creating delivary document
"Delevivary documents could not be created"
Thanks®ards
kishore kumarHi Kishore,
Please check the sales order is this relevent for the delivery or not.
Check the copy control settings between your sales document type and delivery document type in VTLA transaction.
Check the incompletion log for the sales order.
I hope it will help you,
Regards,
Murali. -
Heap space error while creating XML document from Resultset
I am getting Heap space error while creating XML document from Resultset.
It was working fine from small result set object but when the size of resultset was more than 25,000, heap space error
I am already using -Xms32m -Xmx1024m
Is there a way to directly write to xml file from resultset instead of creating the whole document first and then writing it to file? Code examples please?
here is my code:
stmt = conn.prepareStatement(sql);
result = stmt.executeQuery();
result.setFetchSize(999);
Document doc = JDBCUtil.toDocument(result, Application.BANK_ID, interfaceType, Application.VERSION);
JDBCUtil.write(doc, fileName);
public static Document toDocument(ResultSet rs, String bankId, String interfaceFileType, String version)
throws ParserConfigurationException, SQLException {
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder builder = factory.newDocumentBuilder();
Document doc = builder.newDocument();
Element results = doc.createElement("sims");
results.setAttribute("bank", bankId);
results.setAttribute("record_type", "HEADER");
results.setAttribute("file_type", interfaceFileType);
results.setAttribute("version", version);
doc.appendChild(results);
ResultSetMetaData rsmd = rs.getMetaData();
int colCount = rsmd.getColumnCount();
String columnName="";
Object value;
while (rs.next()) {
Element row = doc.createElement("rec");
results.appendChild(row);
for (int i = 1; i <= colCount; i++) {
columnName = rsmd.getColumnLabel(i);
value = rs.getObject(i);
Element node = doc.createElement(columnName);
if(value != null)
node.appendChild(doc.createTextNode(value.toString()));
else
node.appendChild(doc.createTextNode(""));
row.appendChild(node);
return doc;
public static void write(Document document, String filename) {
//long start = System.currentTimeMillis();
// lets write to a file
OutputFormat format = new OutputFormat(document); // Serialize DOM
format.setIndent(2);
format.setLineSeparator(System.getProperty("line.separator"));
format.setLineWidth(80);
try {
FileWriter writer = new FileWriter(filename);
BufferedWriter buf = new BufferedWriter(writer);
XMLSerializer FileSerial = new XMLSerializer(writer, format);
FileSerial.asDOMSerializer(); // As a DOM Serializer
FileSerial.serialize(document);
writer.close();
} catch (IOException ioe) {
ioe.printStackTrace();
//long end = System.currentTimeMillis();
//System.err.println("W3C File write time :" + (end - start) + " " + filename);
}you can increase your heap size..... try setting this as your environment variable.....
variable: JAVA_OPTS
value: -Xms512m -Xmx1024m -XX:PermSize=256m -XX:MaxPermSize=512m -
Error while creating a task for creating an generic task /app/dac/CustomSQ
Hi ,
I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
In DAC task tab i have created a task with the following:
Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
Primary source :flatfileconnection
target source:DBCONNECTION_OLAP
Execution type:SQL FILE
Task phase:GENERAL
I created subject area and assembled ,then created a Execution plan.
When i try to execute this EP ,it shows the following error in DAC log:
ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
Does my above configuration is correct ..?verify the following settings:
1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types -
Error while creating delivery with reference to STO
Hi,
I am getting the following error while creating the delivery with reference to STO
Document is incomplete: You cannot save the delivery
Diagnosis:
When the system checked whether saving delivery was
permitted, it determined that the requirements stored in
Define Incompletion Procedures for this document do not
allow this subsequent function.
I have checked the following already:
1. Maintained shipping data for both the supplying and receiving plants.
2. Shipping tab exists in the PO
3. Shipping point determination is checked.
4. Customer masters created for both supplying plants and receiving plant for the sales area created for STO
5. Material master is available in both receiving and supplying plants.
It is working fine in one client. and giving a problem only in the other.not able to figure out where the error is. appreciate your suggestions
regards
joeHi Joseph,
First go to transaction "VUA4" and see what is the incompletion procedure asigned to your delivery type. Then go to
"OVA2" and see what are the fileds maintained in incompletion procedure of the delivery type and the status groups assigned to them. Now you go to "OVA0(ZERO) and see whether the status group allows to save the delivery. If it doesn't you can untick that check box. But if this is a live system , i doubt if you would be bale to do that. Any way one of the possible causes is storgae location missing. Kindly pelase let me know If you need any more infromation on this.
Regards,
Ram Pedarla -
Error While Creating Sales Document - on a new rollout
Dear Friends,
While going for new Plant Creation on a Rollout, i am getting the following error while creating Sales Order,
Kindly suggest the needy to me,
" _Template and one-time material processing is not activated
No determination routine is specified for the SD documents for the
permitted combinations
The combination of sales organization, document category, and
document type or delivery type for the SD document is not permitted_ "
Thanks & Regards
T.ArulvananDear Freind,
Have you assigned the Sales Area to the Document types
T-code : OVAZ.
Also Check the Sales Applications V/c2
Can you double click on the error and See what is the datails of the error appearing?
Regards,
Amlan Sarkar -
Error while creating billing documents
Hi,
While creating billing documents I am getting error message as
Maintain customizing for excise and series group determination
Message no. 8I619
I have check the setting for CIN it is OK excise and series group are maintain properly so what can be the proble,
regards,
zafarHi,
Check once again customizing
Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
- Define excise series groups based on type of outgoing document
- Assign series group to excise registration ID
- If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
- If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator. Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
- No account postings for CENVAT in sales cycle
- No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Thanks
Chidambaram -
Error while Creating a formula for field AZNOR (T-Code : OP17)
Dear Experts,
i am facing a problem in Transaction OP17 while creating a formula for field AZNOR ( No of indivual capacity in work center) in work center (T-Code : CR02) .
It shows the error
The data object "F" has no component called "AZNOR''..
Please let me know the solution..
Thanks & Regards
Birendra KumarHi,
I have the same problem.
Could You tell me witch is the correct origin?
Thanks a lot!
Bye
Laura -
Error while creating datasource userdsn for oracle 10g Errorcode (998)
while creating datasource userdsn for oracle 10g i am getting error "The setup routines for the oracle in OraDb10g_home1 odbc driver could not be loaded due to system error code 998" please give reply soon
Thanks for your reply , Steve.
I noticed that there is a default datasouce on the EM with the following parameters:
<data-source
class="com.evermind.sql.DriverManagerDataSource"
name="OracleDS"
location="jdbc/OracleCoreDS"
xa-location="jdbc/xa/OracleXADS"
ejb-location="jdbc/OracleDS"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="scott"
password="->pwForScott"
url="jdbc:oracle:thin:@localhost:1521:oracle"
inactivity-timeout="30"
/>
The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
What should be the values for location and xa-location attributes from my "test" data source?
Any help will be greatly appreciated.
Thanks,
Shyam -
Error while creating logical port for Consumer Proxy in SOAMANGER
Hi,
While creating logical port for my consumer proxy in SOAMANGER, I am getting the error shown below
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination
I have searched in the forums but none of the answers helped me.
I have specifed my PI user ID and password and the user has the followwing roles assigned to it.
SAP_BC_WEBSERVICE_SERVICE_USER
SAP_BC_WEBSERVICE_ADMIN_TEC
SAP_BC_WEBSERVICE_CONSUMER
SAP_BC_WEBSERVICE_ADMIN
Current user in the error message refers to the PI user that i have specified or the user with which i have logged in the backend ABAP system?
Please help me reslove this issue.
Thanks and regards
Sreehari NambiarHi,
Please add the following roles as well.
SAP_BC_WEBSERVICE_ADMIN_BIZ
SAP_BC_WEBSERVICE_DEBUGGER
SAP_BC_WEBSERVICE_OBSERVER
Also make sure that you are doing the role comparison after adding all SAP* roles in your profile.
Let me know if this works?
Thanks,
Sridhar -
Error while posting Goods Issue for an STO
Hi All,
I have created a Stock Transport Order for Plant A to Plan B and when I go to transaction VL10D and try to create a delivery for my STO then it gives the following error message
ARun type does not exist
Message no. 8J103
How do I overcome this.Please read OSS note 1287602.
-
Error while creating purchasing documents
Hi,
Iam a new user to Material Management unable to create any Purchasing docments (PR,RFQ,P.o..etc).
As Iam trying to procure a material for stock, selected the Accountassignment as Unknown.
got following two errors
1.Unknown account assignment not defined for use here
2.Source not included in list despite sorce list requirement
pls suggest me something to avoid these errors and create P.Os.
ThanksHi,
I got some clue ,
1. As I have specified it is a stock material, It should not ask for any account assignment.
It is asking because I have not updated the material quantity,value updations in IMG settings for the material type
2.The issue was I have checked the source list for plant in the sorce list configuration settings (SPRO> Materials management>Purchasing>Sourcelist>Define source list requirement at plant level)
And I have not maintained the source list.
If you check the above setting, you need to maintain source list for the material
As you specified I have checked the configuration for combination item category-account assignment for item category that was used when creating purchasing document.
for standard itemcategory,unknown account assignment type has been defined.
Now I could able to create P.Os for stock material by updating qty,value updation in material type, and if I don't update this, and use account assingment as unknown I'm getting the saemerror as "unknown account assignment not defind for use here"
pls let me know how to avoid this error, hep me what are the required settings for making a P.O for accountassignment categories
Thanks -
Getting the following error while creating the model for webdynpro app.
Plugin Name: Web Dynpro Model Editor Services
Plugin ID : com.sap.ide.webdynpro.service.modeleditor
Class :ap.ide.webdynpro.modeleditor.wizards.model. creation.ModelDialog
Method : nextPressed
Exception : org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NoClassDefFoundError)
This is the error i am getting while creating the model for the webdynpro application. Can some one help ?
Thanks & Regards
Lalithhi
This error occurs mainly due to the reason that particular plugin is not there in the NWDS.
So please try to reinstall the NWDS or try tracing out whether that particular plugin is there or not.
Thank,
kris -
Error while creating the delivery for STO
Hi,
While creating the delivery, an error is produced when i saw the log . It was as follows
"An Item with no delivery quantity is not permitted. Item will be deleted"
Its related to STO,. if STO contains around 100 items and error is for any single item system is not able to create the delivery for whole PO.
Please guide as its an vey urgent issue will reward with suitable points.
Regards,
VikramHi
while creating delivery make that particular material's delivery quantity as 0. and do not enter any picking quantity.
that material will not be consider while making delivery.
Regards,
vijay
Maybe you are looking for
-
I just bought an ATV second generation and used the HDMI to the onkyo receiver. The receiver is connected to the Samsung HDTV with component cables. On the receiver, I used the INPUT ASSIGN, GAME, HDMI menu to select the slot for the ATV. I could hea
-
Some important emails have come in and can't be read because all the letters look like boxes. This has never happened before. Some sites that I use are no longer legible because what appears to be the fonts are missing.
-
How do I find program files on my pro?
I need to access the program file for my steam account because it is not finding the servers. Steam suggest that I set my own launch options, but I cannot find where the program file is for steam.
-
Removing the "File / Quit" dropdown from the Menu Bar
How do I remove the "File / Quit" dropdown option from the Authorware Menu Bar ? I have created an AW menu bar with several dropdowns which works well but Authorware seems to create by default a File / Quit option at the beginning which is proving di
-
Hi, We need to get Free text into BW which has length greater than 60 characters and also display it in BEx reports.. I am aware of the 60 char length limitation.. Anyone of you out there have figured out a way top overcome this.. Ashish..