Error while Creating Flat file Source System

Hi Friends,
The message "No entry for BW_USER in table RSADMIN available" is shown when I try to create a Source System for File System(Manual Metadata, Data using File Interface). Could somebody help me please.
Thanks in advance.
Hanuma Reddy

Hi,
I have solved this problem from SDN by seeing below reply to some others question. Thanks Ajay.
I think this problem comes if you have used more than one client in BW (for example if you logged on to 000 and ran admin workbench initially after installation, and then if you prepared another client for use as BW client).
Look at OSS note 410952, it mentions of the same error. The fix as mentioned in the note is as follows
Symptom
You receive the error message when trying to connect a source system to the Admininistrator Workbench:
"No entry for BW_USER in table RSADMIN exists" (message number RSAR 059).
Additional key words
RSAR059, APO, RSADMINA
Cause and prerequisites
In table RSADMINA, the BW user is not maintained for ALE.
Solution
Maintain the entry using the following path:
Call Administrator workbench (transaction RSA1).
From the 'Settings' menu, select Global Settings'.
If an entry already exists in the field "BW user for ALE", delete this.
Enter the correct names for the BW users in this field.
Save the entry.
You must restart the Administrator Workbench (RSA1) now.
The source system can now be linked without errors.

Similar Messages

Creating Flat File Source System in BI

Hi,
How can I create a flat file source system in BI???

Hi,
Here are the steps...
1. Go to RSA1.
2. Click on Source Systems.
3. In the right pane, right click on Source Systems and say "Create".
4. Then choose the option of "FlatFile" from the available options.
5. Give the name to Source system.
Hope this helps.
Regards,
Yogesh.

Need to create a flat file source system in bi?

Hi all,
i need to load the data from a flat file to an ods? can anyone pls tell me the steps to create the flat file source system in bi?
Thanks

Hello,
http://help.sap.com/saphelp_nw70/helpdata/en/43/01ed2fe3811a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6581e07211d2acb80000e829fbfe/frameset.htm
steps:
create source system file (if you haven't)
- create ods
- create update rules for ods and activate
- create infosource
- assign infosource with datasource (source system file)
- maintain transfer rules - maintain infoobject in sequence as flat file to transfer structure. map infoobject in transfer rules. activate transfer rules
- create update rules ods-infosource and activate
- create infopackage, specify external data path (recommended file put in application server)
hope this helps.
Regards,

Error while creating control file

hi
i am getting following error while creating controll file
QL> shutdown
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup nomount
ORACLE instance started.
Total System Global Area 629145600 bytes
Fixed Size                  1250548 bytes
Variable Size             171969292 bytes
Database Buffers          452984832 bytes
Redo Buffers                2940928 bytes
SQL> @c:\study\rose\c.sql
SP2-0042: unknown command "DATAFILE" - rest of line ignored.
SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
SP2-0734: unknown command beginning "CHARACTER ..." - rest of line ignored.
SP2-0044: For a list of known commands enter HELP
and to leave enter EXIT.
1 CREATE CONTROLFILE SET DATABASE "ROSE" RESETLOGS froce logging NOARCHIVELOG
2      MAXLOGFILES 32
3      MAXLOGMEMBERS 2
4      MAXDATAFILES 32
5      MAXINSTANCES 16
6      MAXLOGHISTORY 1752
7 LOGFILE
8 GROUP 1 'C:\oracle\product\10.2.0\oradata\rose\LOG1ROSE.ORA' SIZE 50M,
9    GROUP 2 'C:\oracle\product\10.2.0\oradata\rose\LOG2ROSE.ORA' SIZE 50M,
10   GROUP 3 'C:\oracle\product\10.2.0\oradata\rose\LOG06.LOG' SIZE 25M,
11*   GROUP 4 'C:\oracle\product\10.2.0\oradata\rose\LOG07.LOG' SIZE 25M
SQL>

CHETAN YADAV wrote:
hi
i am getting following error while creating controll file
QL> shutdown
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup nomount
ORACLE instance started.
Total System Global Area 629145600 bytes
Fixed Size                  1250548 bytes
Variable Size             171969292 bytes
Database Buffers          452984832 bytes
Redo Buffers                2940928 bytes
SQL> @c:\study\rose\c.sqlWe can't debug what we can't see. And what we can't see is the contents of "c:\study\rose\c.sql".
SP2-0042: unknown command "DATAFILE" - rest of line ignored.
SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
SP2-0734: unknown command beginning "CHARACTER ..." - rest of line ignored.
SP2-0044: For a list of known commands enter HELP
and to leave enter EXIT.
1 CREATE CONTROLFILE SET DATABASE "ROSE" RESETLOGS froce logging NOARCHIVELOG
2 MAXLOGFILES 32
3 MAXLOGMEMBERS 2
4 MAXDATAFILES 32
5 MAXINSTANCES 16
6 MAXLOGHISTORY 1752
7 LOGFILE
8 GROUP 1 'C:\oracle\product\10.2.0\oradata\rose\LOG1ROSE.ORA' SIZE 50M,
9 GROUP 2 'C:\oracle\product\10.2.0\oradata\rose\LOG2ROSE.ORA' SIZE 50M,
10 GROUP 3 'C:\oracle\product\10.2.0\oradata\rose\LOG06.LOG' SIZE 25M,
11* GROUP 4 'C:\oracle\product\10.2.0\oradata\rose\LOG07.LOG' SIZE 25M
SQL>

Error while uploading flat file

Hello
My flat file(.csv) has 3 columns.But when i am uploading and when i check Master data, it just shows me the first column.Why is it so?
When i maintain Master data, do i have to maintan attr, text and hierarchies?In mapping and transfer rules?What should I map, Attr or text or hierarchies or all the 3?
Thanks

Hi,
Let me make some guesses about your situation.
You use an IS with Direct Update for text master data upload. In this case in Master Data maintenance you'll see the IO's code and its attributes. To see IO's texts you need to click on a 'Text' icon, with a pencil or glasses.
For direct update of master data you need to create an IS with direct update (the last radio button in the 'Create Infosource' screen).
Then right click on an IS - Assign Datasource, choose flat file source system, confirm all system 'Save changes' proposals.
In Infosource change screen press 'Activate'.
Number of datasources for a master data will depend on the settings for the IO. If this IO has master data, texts and hierarchies, then you'll have 3 DSs.
In the 'Datasource' field of the screen you can see what is this DS for. Click on this field and choose another DS. Press 'Activate'. Do it the 3rd time if you have 3 DSs.
Then during an infopackage creation you'll be able to choose an option (Master data attributes, texts, hierarchies) and upload the appropriate data.
Best regards,
Eugene
Message was edited by: Eugene Khusainov

Error while creating logical file using transaction FILE

Hello there,
I am facing an error while creating Logical File name definition using transaction FILE
This is the input which I'm trying to give
Logical file name: ZTEST
Name : ZTEST
Physical file : ZTEST_1<DATE><TIME>.csv
Data format: ASC
Application area: BW
Logical path:ZTEST_1_DATAOUT
when I tried to save it throws me an error like ASSIGN_SUBSTRING_NOT_ALLOWED
Please help.

Hi,
Please check the OSS Notes :
Note 792061 - SP Case Locator: Dump: ASSIGN to a substring isn't allowed.
SAP Note 1297989 - Short dump ASSIGN_SUBSTRING_NOT_ALLOWED
Hope this solves the problem.
-Vikram

Getting error while loading Flat File

Hello All,
I am getting error while loading flat file. Flat file is a CSV file.
Value ',,,,,,,,' of characteristic 0DATE is not a number with 000008 spaces
Data seprator |
Escape sign ;
It has 23708 entries , it s loading successfully till 23 665 entries
Besides when checked in PSA
for record having entries >23667 has calender day as ,,,,,, where as rest entries are having date
Besides when i checked in Flat file ,the total number of rows is 23,667 is there but i wonder why it has got 23,708 in
RSMO
Could you please let me know how to correct.
regards
path

Hi,
For date column you should maintain YYYYMMDD formate Eg: 20090601, kepp cursor on date column and right click and Formate >Custome>make it 00000000 then save teh file as .CSV . First type values on column and do like this formate and save it and without opening it load it. Once you open it you losw 00000000 formate you need to give again the same formate.
Settings in Infopackage:
Data Format = CSV
Data Separator = ,
Escape Sign = ;
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/01ed2fe3811a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6567e07211d2acb80000e829fbfe/content.htm
Thanks
Reddy

Internal error while creating pdf files

Good morning.
I have problems while creating pdf files from FM documents,using FM9: I get an internal error, see here an example:
=== Header Begin ===
Internal Error: 9004, 6921628, 9677518, 0
FrameMaker 9.0.0 for Intel
Build: 9.0p255
Window System: MSWindows
Operating System: Windows NT 5.1 (major.minor.build: 5.1.2600 Service Pack 3)
Generated on: venerdì 30 marzo 2012 11.38.51
To file: C:\Documents and Settings\itgzeanlo\Dati applicazioni\Adobe\FrameMaker\9\FrameLog_12.03.30_11.38.51.txt
=== Header End ===
=== Stack Trace Begin ===
$699d9c
$93aace
=== Stack Trace End ===
=== Open Window List Begin ===
# not implemented
=== Open Window List End ===
=== Recent Commands Begin ===
=== Recent Commands End ===
=== Recent API Calls Begin ===
# not implemented
=== Recent API Calls End ===
=== Windows Relocation Information Begin ===
Application: 00400000
FrameMaker.exe: 00400000 00979000
ntdll.dll: 7c910000 000b8000
I don't have a clue of what's wrong. I tried to uninstall the software and then to install it again, with the same result.
Can you please help me?
Kind regards.
Antonio Locati

> Getting back to your issue - how are you trying to create a PDF? Save As or printing to the AdobePDF printer instance?
I've tried in both ways, and it's exactly the same: I get the error.
> If XP, have you installed the MS hotfix?
Windows is regularly updated through Windows Update.
> What's in your FM doc?
The document is based on some tables (it's a pricelist for our products), there are also some links to some .eps files (which are correctly displayed on screen, so the path is correct).
> Did it work before or has it changed and now errors out?
The file (or better the book made of about fifteen FM files) was created by someone else, on another PC. When I open it, I get the error. When I send my files to another person, he can create pdf files without any problem.
> Does it update without any errors?
Yes, I regularly update Framemaker without any error.
Thanks for your help!!

Error while creating cap file

while creating Cap file through converter , error is coming Class helloworld does not belong to this package while giving the same package path where it is existing physically. i m using javacard version 2.2.1 and J2SE 1.4

Hi Joseph
Thanks and accept my regards. Now I am able to create the .cap file. but I am facing another problem. I am developing a sim application but I am not able to find the sim.toolkit libraries. Can you plz guide me, where i would find the libraries.

Error while loading flat file into DSO

Hi
I am loading data from a flat file into a DSO. My fields in the flat file are Trans_Dt, (CHAR) Particulars (CHAR), Card_Name, (CHAR) Exps_Type, (CHAR)
Debit_Amount,Credit_Amount,***._Amt,Open_Bal_Check_Acnt, (CURR)
0Currency (CHAR)
In the proposal tab apart from the above mentioned fields 3 additional fields viz, field 10, field 11, and field 12 have come. How did these 3 additional fields come when I don't have any additional fields in my flat file? I've deleted these extra 3 fields though.
When I activate the DataSource it is getting activated but then I get the message 'Data structures were changed. Start transactions before hand'. What does this message mean?
When I hit the 'Read preview data' button it doesn't show me any data and gives me the error Missing reference to currency field / unit field for the fields Debit_Amount,Credit_Amount,***._Amt,Open_Bal_Check_Acnt
How do I create a reference field to the above mentioned fields?
Earlier I didn't have the 0Currency field in the flat file. But in my DSO while creating the key figures by default the 0Currency field also got created which is quite obvious. Now while activating the transformations I was getting a message that 'No source field for the field 0Currency'. Hence I had to create a new field in my flat file called 0Currency and load it with USD in all rows.
Please help me in loading this flat file into the DSO.
Thank you.
TR.

Hi guys,
Thanks a lot for your answers. with your help I could see the data in the 'Read preview data' and schedule the load. I did use all the Info objects in the info objects column of the data source to load the flat file.
The data is in PSA successfully without any issues. but when I executed the DTP it failed with errors.
Earlier there was no mapping from Currency field in source to the all the key figure fields in the target in the transformation. The mapping was only from Currency to 0CURRENCY but still the transformation got activated. As per your advise I mapped Currency field to the remaining Key Figure fields but then I am getting the error
'Source parameter CURRENCY is not being used'
Why is that so?
list of Errors after executing the DTP:
1. 'Record filtered because records with the same key contain errors'
Message:
Diagnosis: The data record was filtered out becoz data records with the same key have already been filtered out in the current step for other reasons and the current update is non-commutative (for example, MOVE). This means that data records cannot be exchanged on the basis of the semantic key.
System Response: The data record is filtered out; further processing is performed in accordance with the settings chosen for error handling.
Procedure: Check these data records and data records with the same key for errors and then update them.
Procedure for System administration
Can you please explain this error and how should I fix this error.
2. Exception input_not_numeric; see long text - ID RSTRAN
Diagnosis: An exception input_not_numeric was raised while executing function module RST_TOBJ_TO_DERIVED_TOBJ.
System Response
Processing the corresponding record has been terminated.
Procedure
To analyse the cause, set a break point in the program of the transformation at the call point of function module RST_TOBJ_TO_DERIVED_TOBJ. Simulate the data transfer process to investigate the cause.
Procedure for System Administration
What does this error mean? How do I set a breakpoint in the program to fix this error inorder to load the data?
What does Procedure for System Administration mean?
Please advise.
Thank you.
TR.

Error while loading Flat file to the table (ORA-00936: missing expression)

lat file Hi Gurus
Receiving the following error while trying to load of flat file to the database :
ODI-1228: Task test_file_load (Integration) fails on the target ORACLE connection DEMO_STAGE.
Caused By: java.sql.SQLSyntaxErrorException: ORA-00936: missing expression
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
     at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
     at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
     at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
     at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1079)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3937)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1535)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)
The file which I have tried to load is : SRC_SALES_PERSON and teh table structure is
CREATE table "TRG_SALES_PERSON"(
"SALES_PERSON_ID" NUMBER(8,0) NOT NULL,
"FIRST_NAME" VARCHAR2(80),
"LAST_NAME" VARCHAR2(80),
"DATE_HIRED" VARCHAR2(80),
"DATE_UPDATED" DATE NOT NULL)
Knowledge module used are
LKM File to SQL
IKM SQL Incremental Update
We rae using ODI 11g R2 ...
Thanks and reallty appreciate any help in thsi regard.

HI there,
I am facing the same issue while loading data from SRC_SALES_PERSON(flat file) to TRG_CUSTOMER.
I dont see any errors in the steps however the data is not laoded finally. Here are the sql commands
**On source**
select     ID     C11_ID,
     LASTNAME     C9_LASTNAME
from      TABLE
/*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=SRC_SALES_PERSONSNP$CRLOAD_FILE=D:\Pratima\Softwares\ODI\ofm_odi_companion_generic_11.1.1.5.1_disk1_1of1[1]\demo\oracledi-demo\oracledi\demo\file/SRC_SALES_PERSON.txtSNP$CRFILE_FORMAT=FSNP$CRFILE_SEP_FIELD=0x0009SNP$CRFILE_SEP_LINE=0x000D0x000ASNP$CRFILE_FIRST_ROW=0SNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=IDSNP$CRTYPE_NAME=STRINGSNP$CRORDER=1SNP$CRLINE_OFFSET=1SNP$CRLENGTH=11SNP$CRPRECISION=11SNP$CRACTION_ON_ERROR=0SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=FIRSTNAMESNP$CRTYPE_NAME=STRINGSNP$CRLINE_OFFSET=12SNP$CRLENGTH=50SNP$CRPRECISION=50SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=LASTNAMESNP$CRTYPE_NAME=STRINGSNP$CRLINE_OFFSET=62SNP$CRLENGTH=50SNP$CRPRECISION=50SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=DATE1SNP$CRTYPE_NAME=STRINGSNP$CRLINE_OFFSET=112SNP$CRLENGTH=20SNP$CRPRECISION=20SNP$CR$$SNPS_END_KEY*/
On Target
insert into STAGING.C$_0TRG_CUSTOMER
     C11_ID,
     C9_LASTNAME
values
     :C11_ID,
     :C9_LASTNAME
The actual code at source fails however the step is in green.
Thanks in Advance,
Pratima

I am getting error while creating Control file for a fla file upoad in HANA

Hi Experts,
I am getting the following error when I try to create crtrol file for a flat file extraction in SAP HANA.
Could not execute 'import data into table P935718."COPATBL" from 'COPATBL.csv' record delimited by '\n' fields ...'
SAP DBTech JDBC: [257] (at 14): sql syntax error: incorrect syntax near "into": line 2 col 1 (at pos 14)
Here is the code I have used to create control file after I creating the table.
import data
into table P935718."COPATBL"
from 'COPATBL.csv'
    record delimited by '\n'
    fields delimited by ','
    optionally enclosed by '"'
error log 'P935718.COPATBL.err'
p935718 is my user ID, COPATBL is my table created, COPABL.CSV is a flat file.
Please help me in this regard.
Thanks,
Guna

Hello,
guessing from the error message it looks that you are trying to execute "import data" as SQL command.
Please note that import data is NOT SQL command but it is syntax for control file. You need to create file with this syntax on server and then use command: IMPORT FROM '/<path>/<filename>.ctl'
In a shortcut:
1.- create comma separated CSV file with your data - <source cvs>.csv
2.- upload CVS file to HANA server
3.- create the control file <filename>.ctl:
import data
into table <schema>."<table name>"
from '<source cvs>.csv'
record delimited by '
fields delimited by ','
optionally enclosed by '"'
error log '<file name>.err'
4.- execute command:
IMPORT FROM '/<path>/<filename>.ctl'
Please check following threads:
How to load CSV files into HANA
Will HANA supports Bulkload
Tomas

Getting error while creating XML data source

Hi,
I have converted access database into xml and now wants to convert the xml file into oracle database.while creating the xml database resource geting error ora-065550.PLS-00103:Encountered the symbol"Push" when expecting one of the following .(),*etc.
Why this problem I am facing.
Any Idea
Thanks in advace....

The error message is explicit the WAERS field is hidden...you must edit the datasource structure in RSO2 and uncheck the "hidden" checkbox for that field....
It will solve your problem...
Regards

Error while creating Ear File for project Containing (WAR+MAR) in jdev

hi,
I am trying to deploy my adf application containing MDS customization.While creating EAR from application properties--->deploy--->deploye to EAR i am getting following error.
Wrote MAR file to C:\JDeveloper\mywork\MDSApp\deploy\AutoGeneratedMar.mar
[04:40:07 PM] Wrote Web Application Module to C:\JDeveloper\mywork\MDSApp\ViewController\deploy\MDSApp_ViewController_webapp1.war
*[04:40:07 PM] Warning: Some of the customization documents under '/' are packaged as part of WAR. This metadata cannot be accessed from WAR using MDS.*
*[04:40:07 PM] Info: Namespace '/xliffbundles' is mapped to deploy-target metadata-store-usage 'MAR_TargetRepos' in adf-config.xml but no metadata from the namespace is included in the MAR*.
[04:40:07 PM] Wrote Enterprise Application Module to C:\JDeveloper\mywork\MDSApp\deploy\MDSApp_application1.ear
[04:40:07 PM] Elapsed time for deployment: 4 seconds
[04:40:07 PM] ---- Deployment finished. ----
my adf-config.xml is as below
<?xml version="1.0" encoding="windows-1252" ?>
<adf-config xmlns="http://xmlns.oracle.com/adf/config"
xmlns:adf="http://xmlns.oracle.com/adf/config/properties"
xmlns:sec="http://xmlns.oracle.com/adf/security/config">
<adf:adf-properties-child xmlns="http://xmlns.oracle.com/adf/config/properties">
<adf-property name="adfAppUID" value="MDSApp-3718"/>
</adf:adf-properties-child>
<sec:adf-security-child xmlns="http://xmlns.oracle.com/adf/security/config">
<CredentialStoreContext credentialStoreClass="oracle.adf.share.security.providers.jps.CSFCredentialStore"
credentialStoreLocation="../../src/META-INF/jps-config.xml"/>
<sec:JaasSecurityContext initialContextFactoryClass="oracle.adf.share.security.JAASInitialContextFactory"
jaasProviderClass="oracle.adf.share.security.providers.jps.JpsSecurityContext"
authorizationEnforce="true"
authenticationRequire="true"/>
</sec:adf-security-child>
<adf-mds-config xmlns="http://xmlns.oracle.com/adf/mds/config">
<mds-config xmlns="http://xmlns.oracle.com/mds/config" version="11.1.1.000">
<cust-config>
<match path="/">
<customization-class name="oracle.model.mycompany.SiteCC"/>
<customization-class name="oracle.adf.share.config.UserCC"/>
</match>
</cust-config>
<persistence-config>
<metadata-namespaces>
<namespace path="/xliffbundles" metadata-store-usage="MAR_TargetRepos"/>
</metadata-namespaces>
<metadata-store-usages >
<metadata-store-usage id="MAR_TargetRepos" deploy-target="true">
<metadata-store class-name="oracle.mds.persistence.stores.db.DBMetadataStore">
<property name="jndi-datasource" value="jdbc/mds/DEV_MDS"/>
<property name="partition-name" value="part1"/>
</metadata-store>
</metadata-store-usage>
</metadata-store-usages>
</persistence-config>
</mds-config>
</adf-mds-config>
<adf-faces-config xmlns="http://xmlns.oracle.com/adf/faces/config">
<taglib-config>
<taglib uri="http://xmlns.oracle.com/adf/faces/rich">
<tag name="column">
<attribute name="displayIndex">
<persist-changes>true</persist-changes>
</attribute>
<attribute name="frozen">
<persist-changes>true</persist-changes>
</attribute>
<attribute name="noWrap">
<persist-changes>true</persist-changes>
</attribute>
<attribute name="selected">
<persist-changes>true</persist-changes>
</attribute>
<attribute name="visible">
<persist-changes>true</persist-changes>
</attribute>
<attribute name="width">
<persist-changes>true</persist-changes>
</attribute>
</tag>
<tag name="showDetailHeader">
<attribute name="disclosed">
<persist-changes>true</persist-changes>
</attribute>
</tag>
<tag name="panelSplitter">
<attribute name="collapsed">
<persist-changes>true</persist-changes>
</attribute>
<attribute name="splitterPosition">
<persist-changes>true</persist-changes>
</attribute>
</tag>
</taglib>
</taglib-config>
<persistent-change-manager>
<persistent-change-manager-class>oracle.adf.view.rich.change.MDSDocumentChangeManager</persistent-change-manager-class>
</persistent-change-manager>
</adf-faces-config>
</adf-config>

hi frank,
If you have any idea plz reply...We r stucked with metadat-namespace path attribute.

Error While creating users in managed system.

Dear All,
I am configuring SAP Solution Manager 7.1. I am in stage of Managed System Configuration (for JAVA).
In step 6 Create user: While creating (System) user SM_COLL_<SID> I am getting error :
An error occurred while processing the UME command READ_USER from agent <hostname> : Server returned: 401 Unauthorized. Please check SMD agent application logs.
And for ABAP System,
SMDAGENT_XXX Technical User (in Managed System <SID> Client 000)
while creating user SMDAGENT_<SID> and SAPSUPPORT
I am getting error:
No CENTRAL nor DIALOG instance known for system <SID>
But in SM51 I can see Server Status Active.
and Users are not present.(Checked it through SU01)
I am not getting why this is happening.
Please help me regarding the same.
Thanks & Regards
Ajitabh

Hi,
I am pasting the SMD agent application logs:
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[SMDAgentAppLog]/>
<!PATTERN[SMDAgentApplication.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%t] %10s %m)]/>
<!ENCODING[Cp1252]/>
<!FILESET[0, 10, 1000000]/>
<!PREVIOUSFILE[SMDAgentApplication.9.log]/>
<!NEXTFILE[SMDAgentApplication.1.log]/>
<!LOGHEADER[END]/>
Nov 29, 2011 2:02:09 PM [Thread[Connector,5,main]] Warning    com.sap.smd.wily.hostagent.mai.MaiAdapter - init: Introscope Host Adapter is not active, no Introscope metrics from MAI
Nov 29, 2011 2:21:01 PM [Thread[Thread-33,5,main]] Warning    com.sap.smd.wily.hostagent.mai.MaiAdapter - init: Introscope Host Adapter is not active, no Introscope metrics from MAI
Nov 29, 2011 2:38:31 PM [Thread[Thread-67,5,main]] Warning    com.sap.smd.wily.hostagent.mai.MaiAdapter - init: Introscope Host Adapter is not active, no Introscope metrics from MAI
Nov 30, 2011 1:26:19 PM [Thread[ExRun:OutsideDiscovery_1,5,OutsideDiscovery:ExecTG]] Path       Caught java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:521)
     at com.sap.smd.agent.plugin.connectors.http.ConnectionExtendedImpl.openSocket(ConnectionExtendedImpl.java:2025)
     at com.sap.smd.agent.plugin.connectors.http.ConnectionExtendedImpl.open(ConnectionExtendedImpl.java:1398)
     at com.sap.smd.agent.plugin.connectors.http.ConnectionExtendedImpl.sendInternal(ConnectionExtendedImpl.java:1552)
     at com.sap.smd.agent.plugin.connectors.http.ConnectionExtendedImpl.send(ConnectionExtendedImpl.java:1483)
     at com.tssap.dtr.client.lib.protocol.requests.RequestBase.perform(RequestBase.java:570)
     at com.tssap.dtr.client.lib.protocol.requests.RequestBase.perform(RequestBase.java:693)
     at com.sap.smd.agent.plugin.connectors.http.HTTPConnectorService.performRequest(HTTPConnectorService.java:548)
     at com.sap.smd.agent.plugin.connectors.http.HTTPConnectorService.performRequest(HTTPConnectorService.java:673)
     at com.sap.smd.agent.plugin.connectors.http.HTTPConnectorService.performRequest(HTTPConnectorService.java:638)
     at com.sap.smd.agent.plugin.connectors.http.HTTPConnectorService.performRequest(HTTPConnectorService.java:624)
     at com.sap.smd.agent.plugin.connectors.webservice.SAPHostAgentTrustedConnectionConfigurator.setupTrustedConnection(SAPHostAgentTrustedConnectionConfigurator.java:81)
     at com.sap.smd.agent.plugin.connectors.webservice.WSConnectorFactory.configureLocalSAPHostAgentEndPoint(WSConnectorFactory.java:244)
     at com.sap.smd.agent.plugin.hostagent.check.HostAgentCheckService.getHostAgentVersion(HostAgentCheckService.java:105)
     at com.sap.smd.agent.plugins.dcc.util.WSProxyManager.checkSAPHostAgentVersion(WSProxyManager.java:287)
     at com.sap.smd.agent.plugins.dcc.util.WSProxyManager.initSAPHostControlWebServiceClient(WSProxyManager.java:112)
     at com.sap.smd.agent.plugins.dcc.util.WSProxyManager.getSAPHostControlProxy(WSProxyManager.java:75)
     at com.sap.smd.agent.plugins.dcc.job.PhysicalHostPushJob.run(PhysicalHostPushJob.java:195)
     at com.sap.smd.server.exec.TaskRunner.run(TaskRunner.java:46)
     at com.sap.smd.server.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:781)
     at java.lang.Thread.run(Thread.java:679)
Nov 30, 2011 1:26:19 PM [Thread[ExRun:OutsideDiscovery_1,5,OutsideDiscovery:ExecTG]] Error      Pb:
[EXCEPTION]
java.rmi.RemoteException: Error to perform http request cause by java.io.IOException: Unable to open connection to host "FQDN:1128". The host is down or unavailable...; nested exception is:
     java.io.IOException: Unable to open connection to host "FQDN:1128". The host is down or unavailable.
Dec 2, 2011 4:56:53 PM [Thread[Thread-368,5,main]] Warning    [Setup]Step Id 1051 has no step description
Dec 2, 2011 4:56:53 PM [Thread[Thread-368,5,main]] Warning    [Setup]Step Id 1051 has no step description
Dec 2, 2011 5:02:05 PM [Thread[Thread-363,5,main]] Error      [Setup]Failed to get a soap response from http://FQDN:50000/spml/spmlservice
Dec 2, 2011 5:02:05 PM [Thread[Thread-363,5,main]] Error      [Setup]An error occured while processing the UME command READ_USER from agent HOSTNAME : Server returned: 401 Unauthorized
[EXCEPTION]
com.sap.sup.admin.xmlsoap.core.soap.NativeSOAPException: Server returned: 401 Unauthorized
Kindly help me out guys.
Thanks & Regards
Ajitabh

Error while Creating Flat file Source System

Similar Messages

Maybe you are looking for