Error while creating Multiple Items Shopping Cart with Asset Assignment
Hi All,
I am creating Shopping Cart with multiple items for different Assets.
Example: I have Two Assets (Asset A with the budget of $1000 and Asset B with the Budget of $1500) in the back end system.
Asset A assigned to Order 102649996 (value - $1000) and Asset B is assigned to Order 102645121 (Value - $1500).
I am trying to create Shopping Cart with Two Items for Asset A and Asset B (which are available in Back End).
I created First item (001) in the Shopping Cart for Asset A and Value $750.
I copied the First Item Details to Second Item (002) and changed the Asset as B and Value $1000.
When I click on Check tab in Shopping Cart Browser, the SRM System is giving the Error Message like
Item 001 Order 102649996 budget exceeded
Item 002 Order 102649996 budget exceeded
I am getting the above error, only when I copy the first item details to the second item while creating Shopping Cart.
Actually the Budget is not exceeded (Asset A Budget is $1000 - First Item and Asset B Budget is $1500 - Second Item) and SRM system is taking the order 102649996 (which is assigned to the Asset A) for the Second Item 002 also.
Kindly let me know the Solution or Please let me know do we have any OSS note to resolve the issue.
Thanks a lot in advance.
Best Regards,
Sudarsan
Edited by: KOYYA SUDARSANA NAIDU on Aug 18, 2008 8:22 PM
Edited by: KOYYA SUDARSANA NAIDU on Aug 19, 2008 6:29 AM
Hi. It is a "feature" of SRM.
I asked SAP about it and did not get a good response.
If you enter Asset A, it will copy the internal order number from that asset into the cart. You can not see the internal order in the web, but you can see it in BBP_PD.
If you then change the asset to asset B, it will not refresh the internal order number.
This means you get internal order A on asset B.
It happens any time you change asset number, so if you copy a line then change you will get this problem.
We ended up using the BBP_DOC_CHANGE_BADI to RFC into R/3 and update the internal order number.
Regards,
Dave.
Similar Messages
-
Error in creating PO from shopping cart
Hi,
While creating PO from Shopping Cart in SRM, we are getting the error message "Net price must be grater than 0" and the PO is not getting generated.
Is this issue is somewhere related to maintainance of pricing conditions? if yes, how can we maintain that?
Regards,Hi,
Are you creating PO directly from shopping cart or through PR.If through PR (Purcahse requisation) then chack the valution price in valution tab in PR (ME53N)
PO directly from shopping cart then check the price in Basic data of the shopping cart.if price is there it should reflect in PO.Check your shopping cart free Zero value shopping cart. -
Addition of new field in the "Create limit item" shopping cart
Hello Gurus,
I have a request in my project to add the company code field to the basic data for the "create limit item" shopping cart.
ThanksHi Kedar
Here are the steps....
1. Create a Custom field in SRM and append it to SC table structures in SRM
2. Add this field to the Custom field config for meta data at Item level in IMG>SRM Server> Cross application basic settings> Extensionsand and field control> Configure field control --> Configure control of fields at item level
3. THen find the respective web dynpro application and component for the shopping cart portal UI screen where you want the field to appear. You can do this by right click on the screen area and then select More Field Help
4. Go to SE 80 and enhance the respective webdynpro view by adding the custom field to the Context of the VIew and then adding it to the layout of the view at respective location. After doing this create a binding between the layout field and the context.....
More information around ABAP UI Flexibility can be found at:
http://www.sdn.sap.com/irj/scn/advancedsearch?query=%22abapUIFlexibility%22
Regards
Virender Singh -
Shopping cart with Asset can not create backend PO in SOSC
Dear Expert,
We are using With SRM 7.0 & ECC 6.0 EHP4 , the shopping cart with account assignment cost center can create backend PO in SOSC, but the shopping cart with account assignment Asset can not create backend PO in SOSC.
The xml message is correct in SRM, but not correct in ECC.
Your help is very appreciated....
Best Regards,
billDear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team -
Create a Template Shopping Cart with new SHC SRM Addon UI
Dear all,
Somebody can explain me to create how create a Template Shopping Cart with the new UI SHC, please?
Thanks a lot for your help.
Regards.
LionelHelli Ricardo,
That's a joke!! Are you sure? My end user will not use the UI WDA...How will they create their templates? I don' t understand the concept.
Do you use this new UI? Have you got some experience? In my side, I meet some problem to implement it!!! What's your feedback?
Thanks a lot.
Regards.
Lionel -
Problem in getting data while creating public template shopping cart(urgen)
Hi Gurus,
I am technical guy...Could you please suggest me how to populate the purchase organisation details(be_pur_org) which is of type bbps_sc_app_item.
The problem is while creating normal shopping cart template it is displaying the vendor and inforecord details..when I use the same data for creating the public shopping cart it is not displaying the values (vendor and inforecord details) this is due to the missing of purchase organisation field value which is populated in the field be_pur_org which is of type bbps_sc_app_item.
Is there any badi's to populate the purchase organisation details...?
awaiting for all your replies..points will be rewarded with lots of appreciation
Thanks & Regards,
Ravi GanjiHi
<u>You can use either of the BADIs depending on your requirement.</u>
BAdI Definition Name Description
BBP_PGRP_ASSIGN_BADI EBP Purchasing Documents: Assign Purchasing Group(s)
BBP_PGRP_FIND Shopping Cart: Determine Responsible Purchasing Group(s)
BBP_DOC_CHANGE_BADI
BAdI for Changing EBP Purchasing Documents
<b>Please read the Standard documetation available with them using SE18 transaction in SRM system.</b>
Which SRM version you are using ?
Hope this will help.
Please reward suitable points.
Regards
- Atul -
Error while creating an Item Proposal
Hello Experts,
When I am trying to create an Item proposal (T Code VA51 for order type PV) , after entering the Description , Validity dates, Material and Qty, while saving system is issuing an hard error " Sold to Party is not maintained in the sales area".
While creating an item proposal why would the system check for the Sold to party? I have checked the forum for such an error message but could not find any. Please help me in resolving this issue.
Regards
SaiThanks for your inputs. There is some additional enhancement in the system to check the sold to party during order processing in the program SAPMV45A. That is causing this error.
Regards
Sai -
'User already processing Purchase order' error while creating multiple SES
Hi Experts,
Error 'User XXX already processing Purchase order XXX' is thrown while creating multiple service entry sheets using FM 'MS_CREATE_SERVICE_ENTRY_MULTI'.
This error is not occurred for every entry sheet.Its occurring randomly for few records.
Kindly help me out to solve this issue...
Thanks in Advance...
Edited by: saibandar on Mar 1, 2012 8:09 AM
Edited by: saibandar on Mar 1, 2012 9:51 AMu have to call like this
<b>call dequeue_all</b>
after the COMMIT work.
if i_return[] is initial.
commit work and wait.
call function 'DEQUEUE_ALL'.
Regards
Prabhu -
Error while creating sales order for material with another DIVISION
Hello Friends,
I have a problem with my sales order creation.
I have defined a new sales area 0010 / 10 / 01. I have the sales order type assigned to this sales area. (in VOV8 for the sales order type, in the 'General Control' the 'item division' is flagged.
Now, I have created the sold to party XYZ with all the partner functions defaulted same as the sold to party for the sales area 0010 / 10 / 01.
NOW, I have the material ABC with the DIVISION 10 in the basic data. I have extended the material to my sales org & dist. channel & plant.
Now, while creating the sales order for my sales area 0010 / 10 / 01 , I enter the sold to party XYZ - it is OK. But when I enter the material ABC, I get the error - "SHIP TO PARTY IS NOT DEFINED FOR SALES AREA 0010 / 10 / 10"
Please help to resolve the issue.
Edited by: Vivek on Aug 13, 2009 9:04 AMHi
Common division for Material Master data will not work
Because in the material master Division is a field not an organizational unit
Means when you create MMR you will give sales org, DC, Plant as organizational units and then enter but not division
Division is a field maintained in basic data and sales org data 1
This is the reason in t code you will find in t code VOR2 Common division only customer and conditions but not materials
But in t code VOR1 Common DC ,customer conditions and materials all there are available (you can check these t codes)
Coming to your issue Item div is clecked in your order type
This means the division in MMR has the priority or control for that order type
Your header division is 01 ( taken from customers sales area) and item division is 10 (taken from MMR as per your post)
So it differs
To process this order with Item div is clecked in your order type you need to extend your Sold to party ABC to the sales area 0010/10/10 (the sales area where the division of the material falls)
or alternatively
There should be a customer say DEF created in sales area 0010/10/10 who will be a ship to party ( your error is also the same)
for your ABC that is sold to party in sales area 0010/10/01 where the order is registered
Hope yopu are getting it
ABC in sales area 0010/10/01 will have or should have ship to paty DEF in sales area 0010/10/10
or
ABC should operate in in sales area 0010/10/10 too
If item division is not ticked then these are not necessary as the header division 01 will be valid for all items and syatem will not look MMR at all for division
Regards
Raja -
Currency conversion issue while creating PO from Shopping cart
Hello Experts,
I'm facing an issue in SRM during Limit purchase order creation from Limit shopping cart.
Scenario:
Shopping cart was created on 1st of June and Approved on 20th June & Po was created on the same day. But the currency conversion is no ware matching and couldn't able to trace out the same. I have tried several times to replicate the issue it never done in test environments.
But the PO is creating with refer to Vendor currency. For example if SC was created in USD and vendor order currency in EUR then PO is created in EUR.
the relevant notes were already updated in the system and it is working fine when the SC is created and approved on the same day.
Please give me some idea how to fix this issue.
Is there any way to make SC currency is priority than Vendor Order Currency while creating PO?
Regards
Pratap JHello,
Read information available in KBA 1862453.
It mentions this issue.
Regards,
Ricardo -
Error while creating multiple identity realms
Hi,
I am trying the tutorial for creating multiple identity realms posted on
http://www.oracle.com/technology/obe/obe_as_10g/im/realm_mng/realm.htm
While executing "STEP 12" to enter the following values:
-User Search Base,
-User Creation Base,
-Group Search Base,
-Group Creation Base
I get the following error:
Identity Management Realm Modification Error!
Cannot Modify Identity Management Realm : [LDAP: error code 20 - Attribute Or Value Exists]
For some reason this step just doesnt seem to work. I am using OCS 10.1.1 on Solaris10
Can anyone please help me resolve this issue.
Thanks.Hi. It is a "feature" of SRM.
I asked SAP about it and did not get a good response.
If you enter Asset A, it will copy the internal order number from that asset into the cart. You can not see the internal order in the web, but you can see it in BBP_PD.
If you then change the asset to asset B, it will not refresh the internal order number.
This means you get internal order A on asset B.
It happens any time you change asset number, so if you copy a line then change you will get this problem.
We ended up using the BBP_DOC_CHANGE_BADI to RFC into R/3 and update the internal order number.
Regards,
Dave. -
Update termination error while parking multiple items using BAPI fn module
hi experts,
i am facing a problem with bapi_incominginvoice_park.when i am trying to park invoice for single item for the po the invoice number is generating and getting updated in database in the same way when i am trying to park for multiple items the invoice number is genrating but not getting updated in database table.Here i am getting error 'Express document update terminated BY THE user'.How to solve this problem to find these error i have gone to se13 transaction,there it is showing SAQCL_DUPRC.it is saying duplicate errors in table but there are no duplicates in table.
Thanks,
Vinodhi vinod ....i tried the following it worked...
while sending tax info dont send any tax table manually i.e updating the vit_tax table using append statement
also while testing function module for multiple PO , no need to provide the tax info in the tax table
what we have to do is only to provide 'X' In the tax calculation option in the header details
HEADERDATA-CALC_TAX_IND = 'X'.
1.this will enable tax
2. will make the po status green so that the parked document can be posted . -
Getting 401 error while creating a Report Data Source with MOSS 2010 Foundation
I have setup SQL Server 2008 R2 Reporting Services with SharePoint 2010 Foundation in SharePoint integrated mode. SharePoint Foundation is in machine 1 whereas SQL Server 2008 R2 and SSRS Report Server are in machine 2. While configuring Reporting
Services - Sharepoint integration, I have used Authentication Mode as "Windows Authentication" (I need to use Kerberos).
My objective is to setup a Data Connection Library, a Report Model Library, and a Reports Library so that I can upload a Report Data Source, some SMDLs, and a few Reports onto their respective libraries.
While creating the top level site, "Business Intelligence Center" was not available for template selection since SharePoint Foundation is being used. I therefore selected "Blank Site" as the template.
While creating a SharePoint Site under the top level site, for template selection I again had to select "Blank Site".
I then proceeded to create a library for the data connection. Towards this, I created a new document library and selected "Basic page" as the document template. I then went to Library Settings for this newly created library and clicked on
Advanced Settings. In the Advanced Settings page, for "Allow management of content types?" I selected "Yes". Then I clicked on "Add from existing content types" and selected "Report Data Source". I deleted the existing
"Document" content type for this library.
Now I wanted to created a Data Connection in the above Data Connection library. For this when I clicked on "New Document" under "Documents" of "Library Tools" and selected "Report Data Source", I got the error "The
request failed with HTTP status
401: Unauthorized.".
Can anybody tell me why I am getting this error?
Note: I have created the site and the library using SharePoint Admin account.Hi,
Thank you for your detailed description. According to the description, I noticed that the report server was not part of the
SharePoint farm. Add the report server to the
SharePoint farm and see how it works.
To join a report server to a SharePoint farm, the report server must be installed on a computer that has an instance of a SharePoint product or technology. You can install the report server before or after installing the SharePoint product
or technology instance.
More information, see
http://msdn.microsoft.com/en-us/library/bb283190.aspx
Thanks.
Tracy Cai
TechNet Community Support -
Getting Error while creating multiple Orders using Sales order Create BAPI
Hi,
I am trying to create 2 orders thru the Sales order create BAPI before I commit and save the orders. The Orders are getting created and the BAPI is coming back with success, but it is not setting the system status on the line items of the 1st order. So when I try to cancel the line items on the first order I get the error 'No status object is available for SDI 4924/10' . I would really appreciate if anyone has encountered such error before and could help me out with the reason for this error and the possible solution.
Thanks in advance,
David.Hi,
Check the following link:
http://www.sap-img.com/bapi.htm
Regards,
Bhaskar -
"An Exchange Rate Does not Exist" error while creating an item
Hi..
Pre-requisites: RMS is installed without base data
We are trying to create an item in RMS by filling the required information in "Item Maintenance window" and "Supplier details" screen. After this is done when we select the "Retail by Zone" link and the application prompts an error message : "An Exchange Rate Does not Exist", and all the values in "Retail by zone" screen are not populated. How do we ressolve this?
Thanks in Advance
YaminiAlso, make sure that if a currency has a rate entry for example, 01-jul-2010, then make sure that ALL other currencies have a rate entry for 01-jul-2010, even if the rate has not changed for other currencies - a little trick I learned from an Oracle consultant.
Alan
Maybe you are looking for
-
Strange...I need help!
So, this afternoon, I was using iTunes, downloading an album off of Slsk (actually, the mac version Ssx).....and, without reason, when I tried to play videos on youtube and google video, the videos would play, but the sound would not........but the s
-
Tuxedo 8.0 and Oracle patch 9.2.0.8
Hi, We have installed Oracle patch 9.2.0.8 into UNIX machine. We are using Tuxedo for middleware that using an API Application through Tuxedo to provision onto Oracle database. Since Oracle patch 9.2.0.8 installed, Tuxedo produced core file. It has b
-
Why don't Browse in Bridge command in photoshop cc 2014 work?
Browse in Bridge command in photoshop cc 2014 does not work ( It can not open Bridge program why? )
-
Hp probook 4530s BIOS password recovery
I forgot my bios password after changing my operating system from windows 7 pro to windows 8.1 64 bit. I would like to change some settings in my laptop though currently lam completely locked out. Please help me out.
-
AQ Servlet Help - AQHttp.java is missing
Have installed Oracle OAS 10g R2 on SUSE 8. The aim to to get the Oracle AQ servlet working. I have been following the Oracle Streams Advanced Queueing Guide: [http://docs.oracle.com/cd/E11882_01/server.112/e11013.pdf] Now, to test the AQ servlet it