Problem in getting data while creating public template shopping cart(urgen)

Hi Gurus,
I am technical guy...Could you please suggest me how to populate the purchase organisation details(be_pur_org) which is of type bbps_sc_app_item.
The problem is while creating normal shopping cart template it is displaying the vendor and inforecord details..when I use the same data for creating the public shopping cart it is not displaying the values (vendor and inforecord details) this is due to the missing of purchase organisation field value which is populated in the field be_pur_org which is of type bbps_sc_app_item.
Is there any badi's to populate the purchase organisation details...?
awaiting for all your replies..points will be rewarded with lots of appreciation
Thanks & Regards,
Ravi Ganji

Hi
You can use either of the BADIs depending on your requirement.
BAdI Definition Name Description
BBP_PGRP_ASSIGN_BADI EBP Purchasing Documents: Assign Purchasing Group(s)
BBP_PGRP_FIND Shopping Cart: Determine Responsible Purchasing Group(s)
BBP_DOC_CHANGE_BADI
BAdI for Changing EBP Purchasing Documents
Please read the Standard documetation available with them using SE18 transaction in SRM system.
Which SRM version you are using ?
Hope this will help.
Please reward suitable points.
Regards
- Atul

Similar Messages

Create a Template Shopping Cart with new SHC SRM Addon UI

Dear all,
Somebody can explain me to create how create a Template Shopping Cart with the new UI SHC, please?
Thanks a lot for your help.
Regards.
Lionel

Helli Ricardo,
That's a joke!! Are you sure? My end user will not use the UI WDA...How will they create their templates? I don' t understand the concept.
Do you use this new UI? Have you got some experience? In my side, I meet some problem to implement it!!! What's your feedback?
Thanks a lot.
Regards.
Lionel

Error while creating Multiple Items Shopping Cart with Asset Assignment

Hi All,
I am creating Shopping Cart with multiple items for different Assets.
Example: I have Two Assets (Asset A with the budget of $1000 and Asset B with the Budget of $1500) in the back end system.
Asset A assigned to Order 102649996 (value - $1000) and Asset B is assigned to Order 102645121 (Value - $1500).
I am trying to create Shopping Cart with Two Items for Asset A and Asset B (which are available in Back End).
I created First item (001) in the Shopping Cart for Asset A and Value $750.
I copied the First Item Details to Second Item (002) and changed the Asset as B and Value $1000.
When I click on Check tab in Shopping Cart Browser, the SRM System is giving the Error Message like
Item 001 Order 102649996 budget exceeded
Item 002 Order 102649996 budget exceeded
I am getting the above error, only when I copy the first item details to the second item while creating Shopping Cart.
Actually the Budget is not exceeded (Asset A Budget is $1000 - First Item and Asset B Budget is $1500 - Second Item) and SRM system is taking the order 102649996 (which is assigned to the Asset A) for the Second Item 002 also.
Kindly let me know the Solution or Please let me know do we have any OSS note to resolve the issue.
Thanks a lot in advance.
Best Regards,
Sudarsan
Edited by: KOYYA SUDARSANA NAIDU on Aug 18, 2008 8:22 PM
Edited by: KOYYA SUDARSANA NAIDU on Aug 19, 2008 6:29 AM

Hi. It is a "feature" of SRM.
I asked SAP about it and did not get a good response.
If you enter Asset A, it will copy the internal order number from that asset into the cart. You can not see the internal order in the web, but you can see it in BBP_PD.
If you then change the asset to asset B, it will not refresh the internal order number.
This means you get internal order A on asset B.
It happens any time you change asset number, so if you copy a line then change you will get this problem.
We ended up using the BBP_DOC_CHANGE_BADI to RFC into R/3 and update the internal order number.
Regards,
Dave.

Currency conversion issue while creating PO from Shopping cart

Hello Experts,
I'm facing an issue in SRM during Limit purchase order creation from Limit shopping cart.
Scenario:
Shopping cart was created on 1st of June and Approved on 20th June & Po was created on the same day. But the currency conversion is no ware matching and couldn't able to trace out the same. I have tried several times to replicate the issue it never done in test environments.
But the PO is creating with refer to Vendor currency. For example if SC was created in USD and vendor order currency in EUR then PO is created in EUR.
the relevant notes were already updated in the system and it is working fine when the SC is created and approved on the same day.
Please give me some idea how to fix this issue.
Is there any way to make SC currency is priority than Vendor Order Currency while creating PO?
Regards
Pratap J

Hello,
Read information available in KBA 1862453.
It mentions this issue.
Regards,
Ricardo

Problem with Billing date while creating Billing Document

According to the factory calendar maintained at the client side every Saturday is a holiday. Due to this, the billing date for every Billing Document (vf01) created on Saturdays gets pushed to Monday's date.. I tried using VOFM routine 011 to default the billing date (vbrk-fkdat) to system date.I have assigned the same in copy control.. But this does not work. Any suggestions?

hello,
This is a standard flow and if you want to tamper that, need to change in standard SAP...which I would not recommend you...
Please use a separate factory calender for that particluar site...
Thanks..

Error in creating PO from shopping cart

Hi,
While creating PO from Shopping Cart in SRM, we are getting the error message "Net price must be grater than 0" and the PO is not getting generated.
Is this issue is somewhere related to maintainance of pricing conditions? if yes, how can we maintain that?
Regards,

Hi,
Are you creating PO directly from shopping cart or through PR.If through PR (Purcahse requisation) then chack the valution price in valution tab in PR (ME53N)
PO directly from shopping cart then check the price in Basic data of the shopping cart.if price is there it should reflect in PO.Check your shopping cart free Zero value shopping cart.

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Getting error while creating the Shopping cart.

Hi ,
I am getting error while creating the Shopping cart.
a.Error in account assignment for item 1 (Item Testing SC )
b.Duplicates of Cost Centre T10063 are defined in SRM (Item Testing SC )
Kindly provide the solutions.
Thanks,
Dev

Try the following in the ERP backend system:
Standard Hierarchy Inconsistencies
Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
Update from SAP Global support, the following was the email received:
in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
If you think that your standard hierarchy is inconsistent you can check that as following:
Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
Alternatively, you can run the report 'RKCORRH1' (TN SE38).
Run both the Hierarchy->Master data->test and the
Hierarchy->Master data->comparison.
As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
Once the above two are run, again when you go to test, the inconsistency disappears.

Getting Error while creating Genric Datasource

Hi,
I was try to create genric extracter where i was getting error
While creating view genric extracter where i am getting error "Entry A ZV_ZFRT does not exist in DD02L - check your entry".
My requirement is need to create extracter which is getting populated from three modules like SD,MM,FI/CO.From these three module i am using several tables and some of the tables don't have relation btween these tables as like foreign key and refrence key.
Which extracter i need to create as given scenario?
Does view will fullfill with my requirement or any other extracter.
Please some one can help me in this scenario.
Answer would be great appreciate.

Hi,
Rather than writing a program write a function module. Create a structure and include all the necessary fields in the structure. Then in the function module write the logic to extract the values for those fields. While creating the datasource specify the function module and structure name.
Refer this link:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Hope this helps.
PB

Methodology/Processes Not getting reflected while creating a role via BRM in GRC

Hello All,
The methodology I have created is not getting reflected while creating a new Single role.
I have maintained the condition groups properly in decision table, and assigned the same to the methodology as well.
Please suggest.
Thanks
Regards,
Shruti

Methodology is updated when you press save after completing the first step.
can you please share screen shots of configuration and issue you are getting

Getting error while creating Business Action with EDI EDIFACT 837 document.

Hi,
When I am trying to create a business action with EDI 837 ‘.ecs’ file, I am getting a error. It is not creating the business action. Even it is not displaying any error details.
Please help me in resolving this issue as it's very urgent.
Thanks in advance.

Hi Jyotirmoy,
What error you are getting exactly while creating the business action? Did you try to create business action for any other protocol? If not, then please try to create business action for any other protocol and check whether you are getting the same error over there also.
Regards,
Anuj

Changing billing document date while creating billing document from vf01

Hi gurus,
I have requirement to change billing doc date while creating billing document from VF01.
here I have to consider goods issue date eq billing date.
caluculating billing date = Goods Issue + Goods in Transit duration time.
I have done everu thing but I cant update the caluculated date, iam using the following enhancement
Enhancement:SDVFX001
Function Module:EXIT_SAPLV60B_001
Include:ZXVVFU01 which are part vf01.
here iam sending the calculated date to VBRK-FKDAT
move cal_date to vbrk-fkdat.
need help how to update the calculated date to VBRK-fkdat i.e billing document date
Regards
Bhaskar

Hi
No! That exit is not good for your issue
U can use the user-exit USEREXIT_NUMBER_RANGE_INV_DATE defined in RV60AFZC
Max

Problem in submitting data while refresh in web application

Hi all,
I have problem in submitting data while refreshing the page.
In my application voucher number is generated automatically and as soon as number is genereated voucher detail is inserted in database for newly generated voucher number.
Both of these activity done on the same page as my client want so.
Now I have problem that while refreshing the page, the same data for incremented voucher number stored in database that should not be done.
If there is any solution for this situation other than 1) Generating number in one page and inserting on another 2) block refresh activity, then please reply me.
It's urgent. Your help will help me a lot.
regards,
Deepalee

Hi
You can use either of the BADIs depending on your requirement.
BAdI Definition Name Description
BBP_PGRP_ASSIGN_BADI EBP Purchasing Documents: Assign Purchasing Group(s)
BBP_PGRP_FIND Shopping Cart: Determine Responsible Purchasing Group(s)
BBP_DOC_CHANGE_BADI
BAdI for Changing EBP Purchasing Documents
Please read the Standard documetation available with them using SE18 transaction in SRM system.
Which SRM version you are using ?
Hope this will help.
Please reward suitable points.
Regards
- Atul

Getting ewrror while creating GD view Extracter

Hi,
I was try to create genric extractor where i was getting error
While creating view generic extractor where i am getting error "Entry A V_ZFRT does not exist in DD02L - check your entry".
My requirement is need to create extractor which is getting populated from three modules like SD,MM,FI/CO.From these three module i am using several tables and some of the tables don't have relation between these tables as like foreign key and refrence key.
Which extractor i need to create as given scenario?
Does view will fulfill with my requirement or any other extractor.
Please some one can help me in this scenario.
Answer would be great appreciate.

Hi Lars,
Thanks for the reply.
If i understood correctly , you are suggesting to create var_out1 and var_out2 in output ? If yes can you please guide me on how to do that? I tried but did not find anything suitable to declare table.
Thanks,
Girdhari

Getting error while creating users in Peoplesoft

Have a good day
new fresh instance installed , getting error while creating users in peoplesoft
SQL ERROR FUNCTION SQLExec
ERROR POSISTION 52
RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
pswdreqspecial pswdreqlower
PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS

>
RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
pswdreqspecial pswdreqlower
PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS
>
How is it possible that the first statement has ALLOWDOPRID column that does not exist, where as the original statement has ALLOWOPRID which does exist?
How is it possible that the second original statement has two more errors:
PSWDREQUPPERS should be PSWDREQUPPER
FORM should be FROM.
Please provide the actual error which is being raised, without editing.
Hakan

Problem in getting data while creating public template shopping cart(urgen)

Similar Messages

Maybe you are looking for