Error while Creation Compatible Unit Order

Hi,
I am generating Maintenance Order from Compatible Unit Design.
I am able to generate Order for design type D i.e.standard design.
But when i try for design type T i.e. Standard design template, I am getting the following error : -
*"Assign to CU Order" is not allowed (CUD 00000000000000034508)*
*Message no. BS007*
*Diagnosis*
*The current status of object 'CUD 00000000000000034508' prohibits business transaction 'Assign to CU Order'.*
*Procedure*
*To process business transaction 'Assign to CU Order', you first have to change the status of object 'CUD 00000000000000034508' to allow the transaction 'Assign to CU Order'.*
*This gives you an overview of the system and user statuses that affect the transaction. A transaction can only be executed if there is at least one status that allows it and there is no status that forbids it.*
I checked the config settings for Design template 'T' but could not find anything.
Has anyone come across this. Please help
Thanks & Regards,

Hi Tehsin,
The same system status exists for design type 'D' and i was able to generate Order. But SAP does not allow me to generate order for design type 'T' not sure why. And there are no user statuses in the system.
Thanks & Regards,

Similar Messages

Error while creation of PUrchase order by using BAPI.

Hi All,
We are creating a purchase order thru BAPI ("BAPI_POEC_CREATE") and we are passing the following parameters ( I_PO_HEADER , I_PO_ITEMS , I_PO_ACCASS , I_PO_PARTNER and I_PO_ORGDATA) to the bapi and after processing we are getting the following error and Abend messages.
Messages:
1) Enter at least one item or one limit ( we have added line items in I_PO_ITEMS structure).
2) Incorrect interface data for set 78 in method C.
3) Interface data contains errors.
Can anyone help me in fixing these errors inorder to proceed further.
Regards
Dharmaraju

Hi there,
Did you manage to sort this problem ?
If not let me know
I am using the same and know how to overcome
Thanks
Turlock
T

WM error while creation of production order.

Hi ,
I am trying to create a production order . I am getting below error in log as"Movement type for production supply missing in whse 112, storage type SHP" .
Can anybody tell me which movement type i am missing here ?
Regards
Rohit Chavan

In OMK0, click on Assign & check if you have assigned mvt. type 319 for the w/h - storage type combination.

Serial number error while creating the production order

Hello frds,
I am getting the following error while creating the production order.
"Item 000000 requires exactly 100 serial numbers for the asset".
If i give 100 serial numbers in the order, the error is solved. But i do not want to assign 100 serial numbers, i want to assign only 2 numbers.
I have tried using the new serial number profile also, but it is giving same error.
Kindly guide.
Regards,
Narendra Bora

Dear Narendra
Select the serial number profile and go to serialization procedure and set the ser. usage status 02 - Optional as below.
Procd Procedure description Ser.Usage
PPRL PP order release 02
since the serail number creation is optional for order relase this will allow you to relase with out error and with serail number assigned in partial.
Regards
Soundar

Error while creating the sales order with billing reference

hi alll
i am getting error while creating the sales order with billing reference.The line items are coming in grey.I am not able to change the items as well as the quantity field.Can u guide me
cheers
shalsa007........

Dear SAP SD 007
I can confidently tell that an enhancement or an user exit has been applied in your scenario
You have to check that
Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
Your people has solved the standard problem by enhancement
Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
To solve this only your people have used userexit
Line items and qty greyed out means definately there is some enhancement or user exit applied
You have to check that
Regards
Raja

Error during creation of transfer orders for mateRIA

hi gurus,
I am getting an error while moving material from sl0c2 to sloc1 which is connected to wh by mvmt 321. the document is getting posted and the stock is coming to sloc1,but the error is
"Error during creation of transfer orders for mateRIAL.how to correct the error.
regards
murugan

Hi,
The material is maintained at the Warehouse level, hence warehouse transactions have to be completed, by creating a transfer order and the confirmation of the same will create a transfer posting from SL1 to SL2 in the system. This is trigerred automatically depending on the sytem configuration.
Regards,
raghu

Error while saving the Sales Order

Hi experts,
i am getting a runtime error while saving a sales order stating: SAPSQL_EMPTY_TABNAME. It says the field T681-KOTAB could be empty. I would give in more inputs. Someone plz help.
Thanks.

I would expect that KOTN521 would be a Database table defined in the ABAP Dictionary that relates to the condition implemented in 521 for the usage specified in that record.
You should be able to go into the info system, SE84, and search under ABAP Dictionary / Database Tables to see what KOTN521 is.
Also, since the only Keys to T681 are KVEWE and KOTABNR, and there are two KOTABNR entries with a value of 521, then there must be two different usages (KVEWE) associated with that table.
If you see what they are, you can check to see what the usages represent. Based on a lookup, it appears that a usage of N is for Free Goods, A is for Pricing etc. In our system, we only have A entries.
What are the usages for the 521 entries? Do they relate to Free Goods/Pricing???
Does the table KOTN521 exist in the ABAP Dictionary?
Answering these questions may get you closer to the answer.
Can you compare the values in these entries to what you have in different SIDs?
Is this problem happening in Production, or is it still in a development or Quality Assurance client?
If it is still in development or Q, then it may be that a recent customization change was made.
Compare the entries across your systems, if possible.
Good luck
Brian

RunTime Error while saving a Sales Order

Hi All,
When i am saving a Sales Order, the system is throwing a Runtime Error.
The ABAP Code in the Runtime Error screen as follows.
          select * from (t681-kotab) appending table <cond_tab>
                 up to 1 rows
                 where kappl = se_kappl
                 and   kschl = se_kschl
                 and   datbi >= se_date
                 and   datab <= se_date
                 and   (coding_tab).
Till these days, there was no such error while saving a Sales Order.
How to resolve this issue?
Regards
Pavan

Hi,
The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
The reason could be is someone has screwed up the entries in T681 table. Check that out.
Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
Let me know if you are still stuck up.
If you can send me the ST22 dump of the run time error, i might be able to help you more on this.
Hope this helps.
Thanks,
Balaji

Error While saving the Production Order

Dear Experts
Pls let me know why am getting the below error while saving the production order after release..
PSFC_STD_LAYOUT does not exist
Message no. SSFCOMPOSER004

Dear,
Please check have you assigned the scheduling profile in work scheduling view of materail master?
Then go to OPKP check the same scheduling profile where you have activited the On realese execute printing remove this tick mark and then try with new order.
Or you can do the configuration in Tocde :OPK8 here assign the PSFC_STD_LAYOUT in forum.
Regards,
R.Brahmankar

Error during creation of transfer orders for material

Hi,
We are doing a transfer of stock from one storage with WM to a storage without WM.
But system does not finish the process automatically displaing the following error message:
"Error during creation of transfer orders for material document 49000XXXX"
System cannot find source storage bin
Thanks in advance for the help
Regard
Enzo

your picking strategy does not find the bin where the material is.
So you need to check what value you have entered for picking in WM view of material master.
then you have to check where your material is (storage type and bin)
then you need to check customizing to where what storage types are included in the picking strategy that is tight to the material master entry.

Error while creating a Planned Order

Hi SAP Experts,
I have an error encountered while creating a Planned Order which is "Mode linkage problem with mode number".
Diagnosis:
An application program called an LCA routine and the following error occurred:
An order has at least one condition with mode linkage with the same mode number. The activities of this condition must have compatible modes. The modes are compatible when each mode of one activity has a mode for the other activity with the same mode number. The first activity that violates the condition is given in the return code table in ABAP.
Please enlighthen me what is this error and what should be done to this error.
Thanks in advance,
Raymond

Check the PPM or PDS being used in the Planned Order.
Most likely you have a Setup Activity followed by Produce Activity. However the Mode (i.e. Resource) used in the two activities are different. The same Mode needs to be used both in Setup and corresponding Produce activity.
Hope this helps,
somnath

Co- Product Error while creating a production order

Hi,
While performing the Co-Products Approtionment at the time of creation of Production order..
we are facing a problem regarding cost apportionment I have crated a Source Structure and the cost element is assigned to that Source Structure but still iam facing this issue
kindly help me out.
the error msg is
Debit with cost element 9460404 cannot be settled.
Message no. KD549
Diagnosis
Costs/revenues exist for cost/revenue element 9460404. This cost/revenue element was given source assignment 40 in the source structure (-> settlement rule for sender -> parameters). However, there is no distribution rule with settlement type FUL for this source assignment or the total of the percentages for the rules is less than 100.
Note:
Full settlement settles all the costs and revenues which have occurred up to the settlement period and have not already been settled. In the case of periodic settlement, you can configure the settlement profile so that all the costs occurring in the settlement period are settled, or if an amount less than 100% can be settled.
Procedure
Maintain the distribution rules for source assignment 40 and settlement type FUL or use periodic settlement to settle less than 100%. Change the settlement profile for the sender as necessary.
Change settlement profile
Note:
Cost and revenue elements receive source assignment " " if you have not entered a source structure in the settlement rule parameters.

Hi Krishna Murthy I went through the note but i couldnt recive a big help from that note.
I will explain the step by step process that i have done.
I am attaching the Screen shots of the issue.
1. For co-products I have created a source structure and Sec. Cost Elements were assigned in the source structure.
2. The source structure was assigned in the Material Master for co-products equally distrubuting the amount between 2 materials.
3. When we are trying to create a production order the error was displayed but the costs was getting calculated properly.
4. When I was settling the production order the same error was getting displayed.
I have tried various methods to resolve it.
1. I have created a periodic settlement rule and tried to settle but it didnt work
2. I have assigned the source structure in the settlement profile this also didnt work.

Material Listing Error while creating the sales order

Hi Guru's
I have mantained a material in the lisitng for A002 combiantion for SO/DC/Pric. ref. material
While creating the sales order is throwing an error as material is not listed so the transaction is not possible.
I have done the basic invetingation on the folowing aspects
1)checking the material in the listing
2)Validity periods
3)Material not blcoked
4)Mateial is extened for the respective sales org
Kindly help ASAP.
Thanks & Regards
Tarakaram

Dear SAP SD 007
I can confidently tell that an enhancement or an user exit has been applied in your scenario
You have to check that
Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
Your people has solved the standard problem by enhancement
Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
To solve this only your people have used userexit
Line items and qty greyed out means definately there is some enhancement or user exit applied
You have to check that
Regards
Raja

Error while compiling program unit

Hi All,
I am working on oracle forms 10g.
I am getting an error "wrong no or types of arguments in call to 'COUNTCDRSTODELETE' ", while trying to compile my program unit.
The extract of my program unit is as written below:
PROCEDURE CALL_PCK_BACKOUT IS
-- type bmpf_id_arr is varray(100) of bmp_files.bmpf_id%type;
type bmpf_id_arr is varray(100) of integer;
id_arr bmpf_id_arr := bmpf_id_arr();
file_cnt number := 0;
BEGIN
GO_BLOCK('B_FILE');
first_record;
LOOP
     --     EXIT WHEN :SYSTEM.RECORD_STATUS='NEW';
          IF UPPER(:B_FILE.FILE_ON_OFF_IND) = 'Y' THEN
     FOR I IN ( SELECT BMPF_ID FROM BMP_FILES
                         WHERE BMPF_FILENAME = :B_FILE.BMPF_FILENAME
                         AND BMPF_PROCESSING_STATE = 'P'
                         ORDER BY BMPF_ID ASC)
     LOOP
          if file_cnt < id_arr.limit then
               id_arr.extend;
               id_arr(id_arr.last) := i.bmpf_id;
               INSERT INTO bmp_files_to_backout (file_id, job_id) values (i.bmpf_id,pkg_constants.gt_bat_code_bckout_cdr);
               file_cnt := file_cnt + 1;
          else
               msg_alert('You can select maximum 100 files at a time','E',FALSE);
               RAISE FORM_TRIGGER_FAILURE;
          end if;
     END LOOP;
     END IF;
     EXIT WHEN :SYSTEM.LAST_RECORD='TRUE';
     NEXT_RECORD;
END LOOP;
if file_cnt = 0 then
     msg_alert('Please select at least one file in order to initiate the backout','E', FALSE);
     go_item('b_ctrl.file_name');
     RAISE FORM_TRIGGER_FAILURE;
end if;
if file_cnt > 0 then
commit;
end if;
-- check if the backout request has been accepted or not
if pck_backout.CountCDRStodelete(id_arr,file_cnt) = 0 and pck_backout.AreallCDRSOpen(id_arr,file_cnt) = 0 then
     msg_alert('Backout request can be scheduled for the selected input','E',FALSE);
elsif     pck_backout.CountCDRStodelete(id_arr,file_cnt) != 0 and pck_backout.AreallCDRSOpen(id_arr,file_cnt) != 0 then
     msg_alert('Backout request has been rejected due to maximum number of cdrs exceeded and not all cdrs belonging to open invoices','E',FALSE);
     RAISE FORM_TRIGGER_FAILURE;
elsif     pck_backout.CountCDRStodelete(id_arr,file_cnt) != 0 then
msg_alert('Backout request has been rejected due to maximum number of cdrs exceeded','E',FALSE);
RAISE FORM_TRIGGER_FAILURE;
elsif pck_backout.AreallCDRSOpen(id_arr,file_cnt) != 0 then
     msg_alert('Backout request has been rejected due to not all cdrs belonging to open invoices','E',FALSE);
     RAISE FORM_TRIGGER_FAILURE;
end if;
END;
pck_backout is a stored database package. The definition of two functions used above is as given below:
FUNCTION countcdrstodelete (
p_bmpf_id_array IN pkarray,
p_batch_size IN NUMBER
RETURN NUMBER;
FUNCTION areallcdrsopen (p_bmpf_id_array IN pkarray, p_batch_size IN NUMBER)
RETURN NUMBER;
where pkarray is defined as :
TYPE pkarray IS VARRAY (100) OF INTEGER;
Can anyone please tell me why i am getting wronf type or no of arguments error while calling the databse functions.
I guess, it has to do with the varray field. Can you please tell me if i am using any wrong syntax??
I request all the forms gurus to please help me with this.

Hi Fabrio,
I solved my problem.
I'd to actually define pkarray as sql type rather than PL/SQL type.
It's because oracle forms wasn't able to bind the varray defined locally in program unit with the varray defined in stored PL/SQL function.
Once i created pkarray as sql type and removed the declaration of varray in program unit and PL/SQL code, it worked.
Thanks for your reply though.
Regards,
Navnit

Error while creation of service entry via BAPI_ENTRYSHEET_CREATE

Hi All,
I am struggling while creation of service entry using the BAPI, BAPI_ENTRYSHEET_CREATE. I am getting error ""No account assignment exists for service line 0000000010". I am passing the essr, eskn,eskl, esll structures as-
Please help sorting out what is the issue in the parameters, I am able to manually create an SER via ML81N though.
CALL FUNCTION 'BAPI_PO_GETDETAIL'
EXPORTING
    PURCHASEORDER    = WS_PO
    ITEMS            = 'X'
    SERVICES         = 'X'
IMPORTING
    PO_HEADER        = WA_PO_HEADER
TABLES
    PO_ITEMS         = PO_ITEMS
    PO_ITEM_SERVICES = PO_SERVICES
    RETURN           = BAPI_RETURN_PO.
Entry sheet header
LOOP AT PO_ITEMS.
BAPI_ESSR-PO_NUMBER = PO_ITEMS-PO_NUMBER.
BAPI_ESSR-PO_ITEM   = PO_ITEMS-PO_ITEM.
BAPI_ESSR-SHORT_TEXT = 'Sample'.
   bapi_essr-acceptance = 'X'.
BAPI_ESSR-DOC_DATE = SY-DATUM. " wa_po_header-doc_date.
BAPI_ESSR-POST_DATE = SY-DATUM. "po_items-price_date.
IF PO_ITEMS-ACCTASSCAT = 'U'.
    BAPI_ESSR-ACCASSCAT = 'K'.
ELSE.
    BAPI_ESSR-ACCASSCAT = PO_ITEMS-ACCTASSCAT.
ENDIF.
BAPI_ESSR-PCKG_NO = PO_ITEMS-PCKG_NO.
APPEND BAPI_ESSR.
ENDLOOP.
LINE_NO = 1.
SERIAL_NO = 0.
LOOP AT PO_SERVICES. " WHERE NOT short_text IS INITIAL.
CLEAR BAPI_ESLL.
BAPI_ESLL-PCKG_NO = PO_SERVICES-PCKG_NO.
BAPI_ESLL-LINE_NO = LINE_NO.
BAPI_ESLL-EXT_LINE = PO_SERVICES-EXT_LINE.
BAPI_ESLL-OUTL_IND = PO_SERVICES-OUTL_IND.
BAPI_ESLL-SUBPCKG_NO = PO_SERVICES-SUBPCKG_NO.
BAPI_ESLL-SERVICE = PO_SERVICES-SERVICE.
BAPI_ESLL-BASE_UOM = PO_SERVICES-BASE_UOM.
BAPI_ESLL-UOM_ISO = PO_SERVICES-UOM_ISO.
BAPI_ESLL-PRICE_UNIT = PO_SERVICES-PRICE_UNIT.
BAPI_ESLL-FROM_LINE = PO_SERVICES-FROM_LINE.
BAPI_ESLL-TO_LINE = PO_SERVICES-TO_LINE.
BAPI_ESLL-SHORT_TEXT = PO_SERVICES-SHORT_TEXT.
BAPI_ESLL-PLN_PCKG = '2'.
BAPI_ESLL-PLN_LINE = LINE_NO.
APPEND BAPI_ESLL.
LINE_NO = LINE_NO + 1.
ENDLOOP.
Now we wanted to create SES based on entered Quantity & NetValue.
LOOP AT BAPI_ESLL.
IF BAPI_ESLL-LINE_NO = '2'.
    BAPI_ESLL-QUANTITY = PO_SERVICES-QUANTITY.
    BAPI_ESLL-GR_PRICE = WS_PR. "po_services-gr_price.
    MODIFY BAPI_ESLL INDEX SY-TABIX TRANSPORTING QUANTITY GR_PRICE.
ENDIF.
ENDLOOP.
LOOP AT PO_ITEMS.
CLEAR BAPI_ESKL.
BAPI_ESKL-LINE_NO = 2.
BAPI_ESKL-SERNO_LINE = 1.
BAPI_ESKL-PERCENTAGE = 100.
BAPI_ESKL-SERIAL_NO = 1.
APPEND BAPI_ESKL.
SERIAL_NO = SERIAL_NO + 1.
BAPI_ESKN-GL_ACCOUNT = PO_ITEMS-MAT_GRP.
BAPI_ESKN-PCKG_NO = '2'.
BAPI_ESKN-SERIAL_NO = SERIAL_NO.
APPEND BAPI_ESKN.
ENDLOOP.
CALL FUNCTION 'BAPI_ENTRYSHEET_CREATE'
EXPORTING
    ENTRYSHEETHEADER            = BAPI_ESSR
    TESTRUN                     = ''
IMPORTING
    ENTRYSHEET                  = WS_ENTRYSHEET_NO
TABLES
    ENTRYSHEETACCOUNTASSIGNMENT = BAPI_ESKN
    ENTRYSHEETSERVICES          = BAPI_ESLL
    ENTRYSHEETSRVACCASSVALUES   = BAPI_ESKL
    RETURN                      = I_RETURN.
Thanks!!

The issue resolved now by passing the following parameters-
EntrySheet header-
BAPI_ESSR-PO_NUMBER = PO_NUMBER.
BAPI_ESSR-PO_ITEM   = PO_ITEM.
BAPI_ESSR-SHORT_TEXT = as entered by user
BAPI_ESSR-ACCEPTANCE = u2018Xu2019 or space.
BAPI_ESSR-DOC_DATE = Todayu2019s date.
BAPI_ESSR-POST_DATE = Todayu2019s date.
BAPI_ESSR-PCKG_NO = '0000000001'.
Entry Sheet Account Assignment-
BAPI_ESKN-COSTCENTER = Cost Center
BAPI_ESKN-WBS_ELEMENT = WBS element
BAPI_ESKN-AUFNR = Order
Entry Sheet Services-
Unplanned line-
BAPI_ESLL-PCKG_NO = '0000000001'.
BAPI_ESLL-LINE_NO = LINE_NO (000001).
BAPI_ESLL-EXT_LINE = '0000000000'.
BAPI_ESLL-OUTL_LEVEL = 0.
BAPI_ESLL-OUTL_IND = 'X'.
BAPI_ESLL-SUBPCKG_NO = '0000000002'.
Planned line-
BAPI_ESLL-LINE_NO = LINE_NO (000002).
BAPI_ESLL-PCKG_NO = '0000000002'.
BAPI_ESLL-SUBPCKG_NO = '0000000000'.
BAPI_ESLL-EXT_LINE =   '0000000010'.
BAPI_ESLL-SERVICE = '0000000000'.
BAPI_ESLL-OUTL_LEVEL = 0.
BAPI_ESLL-OUTL_IND = ' '.
BAPI_ESLL-QUANTITY = as entered by user
BAPI_ESLL-BASE_UOM = PO_SERVICES-BASE_UOM.
BAPI_ESLL-GR_PRICE = as entered by user
BAPI_ESLL-PLN_PCKG = '0000000000'.
BAPI_ESLL-PLN_LINE = '0000000001'.
Entry Sheet Service access values-
BAPI_ESKL-LINE_NO = '2'.
BAPI_ESKL-PCKG_NO = '0000000002'.
BAPI_ESKL-PERCENTAGE = '100'.
Thankyou!

Error while Creation Compatible Unit Order

Similar Messages

Maybe you are looking for