Error while defining derivation rules in FMDERIVE

We are currently on ECC6. While defining Funds Mgmt .... activated the derivation rules in FMRULES. But when I try to define the derivation rules in FMDERIVE .. I get the following error:  Syntax error in program "RFMDERIVE003 ".
Error in the ABAP Application Program
The current ABAP program "SAPMABADR" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RFMDERIVE003 " in include
"RFMDERIVE003 " in
line 32:
"The Dictionary structure or table "FMDERIVE003" is either not active o"
"r does not exist."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP* "
Error in the ABAP Application Program
The current ABAP program "SAPMABADR" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
How can the same be rectified. Kindly help.
Thanx
Shivaji

Hi,
Check the OSS note  Note 644974 - Syntax error in program RFMXPR47. Looks like table FMDERIVE is missing.
Regards,
Sanjay

Similar Messages

  • Product costing error while defining posting rules

    Hi Friends,
    When I'm trying to define posting rules for settling WIP using OKG8,
    I get an error msg "GL account 7000100 cannot be created as a cost element" and the aforesaid account is WIP (P&L account).
    The long text of the error msg is as follows:
    G/L account 7000100 cannot be created as a cost element
    Message no. KQ119
    Diagnosis
    When maintaining the posting rules for passing on results analysis data to Financial Accounting, you entered a G/L account that is defined as a primary cost element in cost and revenue element accounting. This is not allowed. You must enter a G/L account in the posting rules that is not defined as a cost element.
    System Response
    The entry invalid.
    Procedure
    You have the following options:
    Enter a G/L account for which no cost element is specified in Cost and Revenue Element Accounting.
    You can change the message type with user-defined error management (transaction OPR4_KKA). What should be observed when you enter a G/L account in a posting rule that is defined as a primary cost element in Cost and Revenue Element Accounting? You need to define a CO account assignment so that the posting defined in the posting rule can be executed. You do this with transaction OKB9 (default account assignment) or OKC9 (substitution), or using the default account assignment in the cost element master.
    Could anyone suggest me on this.
    The steps that I've already defined as far as the account are concerned:
    1. Have defined the aforesaid account as a cost element
    2. Assigned Prodn. C CTR in OKB9 agnst the same.
    But then I dont understand why the system pops up this msg, saying, cannot be created as a cost element, wherein the account is already a cost element.
    Plz suggest
    regards
    sandhya

    Hiya,
    WIP accounts (neither Inventory nor Offset) should NEVER be created as Cost Elements.
    In most manufacturing scenarios, costs are tracked on the P&L. During period-end, since there is the risk of writing off some issues to the Production/Process/Sales Order, SAP has introduced the complex but ingenious system called Results Analysis that moves the balance of all open Orders to the Balance Sheet.
    If the Order balance is (+)ve, the P&L is credited and the Balance Sheet is debited and vice versa. When you display the Order costs at period-end, the WIP costs are not considered. In order to calculate WIP, we have separate RA GL accounts that track costs independently of the Orders. Therefore, these are never created as Cost Elements. Creating these as Cost Elements would force the system to inadvertently post the WIP costs back on the Order (alongwith posting these to the B/S??? - an unimaginable situation).
    At period-end, you have postings like:
    Dr WIP Inventory Account
    Cr WIP Offset Account
    and, this is reversed at settlement:
    Cr WIP Offset Account
    Dr WIP Inventory Account
    Along with this, the system calculates the Actual COS for the finished product. Neither of the two WIP accounts used above is created as a Cost Element. If you have created any of these as Cost Elements, the system will not allow you to save OKG8. Delete the Cost Element and then try saving the posting rule.
    (PS: The "Cost Element" field in this screen has a different use. It is used to specify if a Secondary Cost Element from the RA Update table should be posted to a G/L Account. This is not meant for Primary Cost Elements. I think these Secondary CEs are of type 31 (requires confirmation - no SAP access right now). As you may have guessed, you can only enter either the RA Category or this Secondary CE).
    You may also delete the OKB9 assignment to the Cost Centre. It is redundant.
    Hope this helps.
    Cheers.

  • Error while defining alert rule.

    Hi ,
    I am working with Alert framework  and it is triggering the mail when ever message is failing at IE or AE  level.
    I have defined the  following container variable of ABAP data type
    SXMS_FROM_SERVICE                  SXI_FROM_SERVICE
    SXMS_FROM_NAMESPACE          SXI_FROM_ACTION_NS
    SXMS_FROM_INTERFACE          SXI_FROM_ACTION
    SXMS_TO_SERVICE               SXI_TO_SERVICE
    SXMS_TO_NAMESPACE                  SXI_TO_ACTION_NS
    SXMS_TO_INTERFACE                   SXI_TO_ACTION.
    and my long text is defined as
    Sender service = &SXMS_FROM_SERVICE&
    Sender namespace = &SXMS_FROM_NAMESPACE&
    Sender interface = &SXMS_FROM_INTERFACE&
    Receiver service = &SXMS_TO_SERVICE&
    Receiver namespace = &SXMS_TO_NAMESPACE&
    Receiver interface = &SXMS_TO_INTERFACE&
    Now I  am defining 2  alert rule one for IE and one for AE by using above alert categories.
    now My Question
    1. When I am putting * for sender Interface  and giving receiver Interface detail  it is working fine for AE errors.but it is not working when i am giving sender Interface description and putting * for receiver interface description.
    I have checked several time that i am giving correct entry for sender Interface detail.
    2.my long text giving the wrong Information.
    when i have defined my sender interface detail and giving * for receiver interface at my alert rule ,it is copying the sender interface name and namespace name to the receiver interface and namespace name .
    EX-
    Sender service = ECC1
    Sender namespace = testInterface
    Sender interface =urn:test.com
    Receiver service = 3party1
    Receiver namespace = testInterface
    Receiver interface = urn:test.com
    and reverse is happening when I am giving * for sender detail and entry for receiver detail.
    I think these container variable get filled at run time and it has to give correct  detail in long text.
    please help in knowing  why this  is happening.
    regards,
    Navneet

    Hi..
    please try this....Goto KSR2_VBP.
    THere are two strategies.. 01 and 02.
    01 for manual creation of settlement rules
    02 for auto creation..
    first check whether 01 and 02 are in your plant.
    Sales and distrib....basic functions......auto gen. of settlement rules.......
    here you ll find two activities.
    (1)maintaining the settlement strategies and
    (2)activating one among them.
    If you activate 02, your problem will be solved..
    Also check this..
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/a9/ab777d414111d182b10000e829fbfe/frameset.htm
    The settlement profile is to be defined for thee particular Order Type to generate automatically.
    Define Production Order Type in OPJH
    Under Cost controlling check the settlement profile .
    If not create the same in OPJH.
    Settlement Profile: Create settlement profile - SPRO > Controlling > Product Cost Controlling > Product cost by Order > Period End Closing > Settlement > Create Settlement Profile
    Enter Settlement profile from OPJH or Choose one for production order
    and configure Settlement profile. Indicators
    with wishes
    karthick.

  • "Error occurred in derivation rule" & "No commitment item entered in item".

    Unable to create Purchase Request (PR) and the following error message shows
    "Error occurred in derivation rule. See Long Text"
    Diagnosis
    Fund From Commitment Item
    No entry in a derivation rule was found for the specified source fields.
    The derivation rule was set up that an error message appears when this happens.
    The required derivation rule entry would need the following source fields:
    Commitment Item
    xxxxxxx
    Procedure:
    Create an entry in a derivation rule for these source field values.  Make sure that entries exist for all the valid source field values.  If the derivation should not always be carried out, you can also define rule so that no error message appears if a derivation rule entry does not exist.
    Can any one help how to find out the root cause of the error and solve this issue
    Regards,
    GB

    I was able to duplicate your error by creating the following.
    I went to transaction FMDERIVE and created a derivation rule and named it "Fund From Commitment Item".
    On the definition tab, I selected committment item (COMMIT_ITEM) for the source field and the target field selected (FUND).
    The condition tab was left blank. NOTE: On the attribute tab I selected the option "Issue Error Warning If No Value Found).
    I entered no rule values (F9) within the rule (for example such as commitment item XXXXXXX = fund YYYYY) and saved.
    After creating this derivation rule, I get the same error message because there were no values in the derivation rule (the source commitment item used was not found in the rule).
    If Fund is a field that is always keyed manually then I would not have such a derivation rule.
    But you may have some exceptions (like we do) and in the case of exceptions you can populate the derivation rule with those exceptions... i.e. whenever commitment item XXXX is used then the fund should be equal to YYYY further using your conditions and attributes for your custom needs.

  • Error occurred in derivation rule in SAP

    Hi All
    i am trying to post the document as well to create the new PR i am getting the below error messge as
    'Error occurred in derivation rule. See long text
    Message no. K/101
    Diagnosis
    : Fund From Commitment Item
    No entry in a derivation rule was found for the specified source fields.
    The derivation rule was set up so that an error message appears when this happens.
    The required derivation rule entry would need the following source fields:
    Commitment Item
    350801
    Procedure
    Create an entry in a derivation rule for these source field values. Make sure that entries exist for all the valid source field values. If the derivation should not always be carried out, you can also define a derivation rule so that no error message appears if a derivation rule entry does not exist.

    Hi Krishguna,
    You need to check your derivation rule, T. Code: FMDERIVE for Fund then activate the trace, this will help you why fund is not deriving from commitment item, or tell us the detail of derivation for fund you have set.
    Thanks
    Javed

  • Error while executing the rule session

    Hi, I am using Oracle Business Rules Engine 10.1.3.3.0.I am developing rules using XML Facts.I am using a complex type array schema and binding it to define XML facts.Earlier the depth of the schema is 1 and it worked fine,now our schema's depth is 2 and while binding this schema is also working fine.The sample structure of the present schema I am binding is
    <xsd:schema>
    <xsd:element name = 'ruleRepository' type = 'RuleRepositoryType'/>
    <xsd:complexType name='RuleRepositoryType'>
    <xsd:sequence>
    <xsd:element ='ruleFacts' type='RuleFactsType' minOccurs='0' maxOccurs='unbounded'/>
    </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name='RuleFactsType'>
    <xsd:sequence>
    <xsd:element name='fact1' type='xsd:string'/>
    <xsd:element name='fact2' type='xsd:string'/>
    <xsd:element name='fact3' type='xsd:string'/>
    <xsd:element name='fact4' type='Fact4' minOccurs='0' maxOccurs='unbounded'/>
    <xsd:sequence/>
    </xsd:complexType>
    <xsd:complexType name='Fact4'>
    <xsd:sequence>
    <xsd:element name='element1' type='xsd:string'/>
    <xsd:element name='element2' type='xsd:string'/>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:schema>
    Earlier I have binded the similar schema as above but without 'fact4'.It went well and the rules were executing fine.
    However when I am trying to bind a similar schema like the above one, its binding fine but when executing from the BPEL Process,its giving errors like,
    "Error Caching Decision Services metadata,fact3 is undefined in DM,line6,Column 12",
    Please note that I am using fact1 and fact2 only for defining the rules , I am niether using fact3 which is a simple type nor fact4 which is a complex type.
    I have asserted Package.RuleRepositoryType in the definitions of the rule author.I have tried with different combinations of assertions but no one worked.
    The above error(
    "Error Caching Decision Services metadata,fact3 is undefined in DM,line6,Column 12") is coming for the first run of the decision service only,in the next runs its giving another error,which is like
    <2008-04-10 07:52:30,772> <ERROR> <default.collaxa.cube.services> <::> ORABPEL-36333
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::>
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> Error while executing the rule session.
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> The rule session {0} failed to execute.
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::>
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.execute(OracleRuleSession.java:251)
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:1385)
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.impl.DecisionServiceImpl.assertExecuteWatchStateless(DecisionServiceImpl.java:546)
    <2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.invoke_assertExecuteWatchStateless(BookOrderDecisionSOAPBinding_Tie.java:162)
    <2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.processingHook(BookOrderDecisionSOAPBinding_Tie.java:457)
    <2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.StreamingHandler.handle(StreamingHandler.java:297)
    <2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.JAXRPCProcessor.doEndpointProcessing(JAXRPCProcessor.java:413)
    <2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
    <2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.JAXRPCProcessor.doRequestProcessing(JAXRPCProcessor.java:277)
    <2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
    <2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.JAXRPCProcessor.doService(JAXRPCProcessor.java:134)
    <2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
    <2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    <2008-04-10 07:52:30,801> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at java.lang.Thread.run(Thread.java:595)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> Caused by: java.lang.NullPointerException
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.rpi.oracle.RuleSessionPool.getSession(RuleSessionPool.java:463)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.execute(OracleRuleSession.java:224)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> ... 26 more
    <2008-04-10 07:52:30,803> <ERROR> <oracle.bpel.services> <::>
    java.lang.NullPointerException
    at oracle.bpel.services.rules.rpi.oracle.RuleSessionPool.getSession(RuleSessionPool.java:463)
    at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.execute(OracleRuleSession.java:224)
    at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:1385)
    at oracle.bpel.services.rules.impl.DecisionServiceImpl.assertExecuteWatchStateless(DecisionServiceImpl.java:546)
    at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.invoke_assertExecuteWatchStateless(BookOrderDecisionSOAPBinding_Tie.java:162)
    at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.processingHook(BookOrderDecisionSOAPBinding_Tie.java:457)
    at oracle.j2ee.ws.server.StreamingHandler.handle(StreamingHandler.java:297)
    at oracle.j2ee.ws.server.JAXRPCProcessor.doEndpointProcessing(JAXRPCProcessor.java:413)
    at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
    at oracle.j2ee.ws.server.JAXRPCProcessor.doRequestProcessing(JAXRPCProcessor.java:277)
    at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
    at oracle.j2ee.ws.server.JAXRPCProcessor.doService(JAXRPCProcessor.java:134)
    at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
    at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
    at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    08/04/10 07:52:30 pFaultMessage is org.collaxa.thirdparty.apache.wsif.base.WSIFDefaultMessage@6e0e5f name:operationErroredFault
    08/04/10 07:52:30 QName string is operationErroredFault
    where 'BookOrderDecision' is the name of the decision service I am using in BPEL.
    I dont understand why I am getting two errors for the same BPEL Process.
    Kindly help me in this problem.I am stuck with this for about a week but could not get to the solution.
    Thanks in advance.
    Regards,
    Venkat.

    Hi Venkat,
    Whenever you do schema changes, you need to go through the cycle of
    re-importing the XML schema in the rule repository, re-create the decision
    service partnerlink, re-deploy the decision service.
    I suspect you have maybe imported the entire XML fact type model (with fact3 and
    fact4) instead of just fact1 and fact2 (might want to check in rule author).
    So even if you don't use fact3 and fact4 in decision service, they are part of the rules
    datamodel.
    Regards,
    Ralf

  • Error occurred in derivation rule. See long text ; Message no. K/110

    I am facing the below error when posting document in FI
    Error occurred in derivation rule. See long text
        Message no. K/110
        CO-PA Characteristic Derivation
    Diagnosis
        Step 0166 5400: Profit Center in Inventory Posting
        No derivation rule entry was found for the specified source values valid
        on 02.04.2014.
        The derivation rule was defined so that an error message is displayed
        when this occurs.
        The system could not find a rule entry valid on 02.04.2014 for the
        following source fields:
         Product Group
    Procedure
         Create a rule entry for these source values and make sure that rule
         entries exist for all the source values.
         If you do not want the derivation to be performed in every instance, you
         can also change the derivation rule so that no error message is
         displayed if a rule entry is missing.
         Maintain entries
         Maintain derivation strategy
    In KEDE:
    In KEDR:
    Please help me what might be the reason.

    Hi Thanga,
    I don't think this is the right group to ask questions relevant to Controlling-Profitability Analysis.
    otherwise, it seems in your 'Characteristic Derivation/ Display Rule values' you are missing an argument 'to Product Group', therefore the system gives you this error 'The system could not find a rule entry valid..'.
    hope this will help you.
    Kind regards,
    Renatas

  • Error occurred in derivation rule

    Dear All,
    After saving the billing document, & it is not realesed to A/c. Document.My client came across the following error;
    Error occurred in derivation rule. See long text
    Message no. K/111
    CO-PA Characteristic Derivation
    Diagnosis
    Step 0031 Category --> Item Category Dummy
    No entry in a derivation rule was found for the specified source fields.
    The derivation rule was set up so that an error message appears when this happens.
    The required derivation rule entry would need the following source fields:
    Customer
    31970063
    Procedure
    Create an entry in a derivation rule for these source field values. Make sure that entries exist for all the valid source field values. If the derivation should not always be carried out, you can also define a derivation rule so that no error message appears if a derivation rule entry does not exist.
    Maintain entries
    Maintain derivation strategy
    Waiting for the response.
    Thanks & Regards,
    SPT

    Hi,
    Check value fields assigned to each condition types and take a help of FICO consultant.
    Use this link to understand what configuration steps need to be taken accross.
    http://help.sap.com/saphelp_46c/helpdata/en/7a/4c38e14a0111d1894c0000e829fbbd/content.htm
    Thanks,
    Swamy H P

  • Error occurred in derivation rule. See long text, Message no. ABADR100,

    Hi
    I am making some testing and I have the following message , which is about the functional area. I did not use the FM derive:
    Error occurred in derivation rule. See long text
    Message no. ABADR100
    Diagnosis
    SAP - Original Generic 4.7 Ver: Funded Program fro
    No derivation rule entry was found for the specified source values valid on 22.06.2011.
    The derivation rule was defined so that an error message is displayed when this occurs.
    The system could not find a rule entry valid on 22.06.2011 for the following source fields:
    Financial Management Area/Functional Area
    Z001/6000
    Procedure
    Create a rule entry for these source values and make sure that rule entries exist for all the source values.
    If you do not want the derivation to be performed in every instance, you can also change the derivation rule so that no error message is displayed if a rule entry is missing.
    please help

    Hi Thanga,
    I don't think this is the right group to ask questions relevant to Controlling-Profitability Analysis.
    otherwise, it seems in your 'Characteristic Derivation/ Display Rule values' you are missing an argument 'to Product Group', therefore the system gives you this error 'The system could not find a rule entry valid..'.
    hope this will help you.
    Kind regards,
    Renatas

  • Error while defining a warehouse as Bonded Store

    Hi All
    I am getting one error while defining a OPM Warehouse as Bonded Store in OPM Inventory Module under Warehouse Attributes.
    The error is 'APP-JA-460778: This Warehouse does not have a Parent Organization defined in Oracle Financials'. Can any one tell me where i missed the setup part of defining a parent organization in Financial Module. We are on OPM 11i EBS.
    Thanks in advance
    Prem.

    I think you are using India Localization. Sorry, I don't have any knowledge in that area.
    I got following information about how to setup Organization/Warehouse. And it says that any deviation from this may result in error. Check if you are following all the steps required for defining warehouse and organization.
    Please ensure that the following setups are done exactly as mentioned below:
    1) Create an OPM organization in OPM System Administration using OPM Organization Screen eg. ‘PM1’
    2) Create a Location using ‘HR Locations’ form with the same name as the OPM Organization (eg. PM1)
    3) Create an Inventory Organization using the form ‘HR Organizations’ with the same Organization Code as the OPM organization Code created in step 1. (Additional Identification details of the Organization could be given after a colon (:) in the Organization Name – Eg. ‘PM1: Vision Process India Mumbai’). Make this Inventory Organization as ‘Process Enabled’ and in the ‘Process Organization’ field, refer to the OPM Organization. Attach the HR Location created in step 2 to this Inventory Organization.
    4) On saving the Inventory Organization record, the system shall automatically create a Warehouse with the same name in OPM under the OPM organization. (eg.PM1)
    5) Query the Location ‘PM1’ and attach the Inventory Organization ‘PM1’ to it.
    6) Go to Organization Additional info in OPM System Admin – Create a record for ‘PM1’.
    Enter the EC Code for this Organization, as this is the Excise Licensed Organization. After saving
    the record here, an automatic entry is created in India Local Inventory – Organization Additional Information for the Inventory Organization.
    7) Go to India Local Inventory Org Additional Info and query for this Organization (it will be visible without location). DO NOT mark this as Master Organization.
    8) Add another record for the Organization with Location (eg. PM1)
    9) Check the 'Master Org' flag for this combination of Organization and Location.
    B: Warehouse :
    1) Create an Inventory Organization in India Local Inventory corresponding to the Warehouse in OPM (eg. ‘WSH’). Make this as ‘Process Enabled’ and give the ‘Process Organization’ as the
    OPM Organization created earlier (PM1), which is the Process Organization this Warehouse is going to report to.
    2) Create location (WSH-With the same name as the Warehouse Code) in India Local Inventory and attach it to organization ‘WSH’ in India Local Inventory
    3) System automatically creates Warehouse ‘WSH’ in OPM under the OPM organization (PM1)
    4) Using the ‘Warehouse Attributes’ form, classify this Warehouse as Bonded/Trading/OSP
    5) Go to India Local Inventory Organization Additional Information form and create a record ‘WSH’ giving the Master Organization as ‘PM1’ (actually this is referring to the combination of PM1 with Location
    PM1 as Master Organization) . Add another record for the same Org ‘WSH’ with Location ‘WSH’
    with Master Organization as ‘PM1’. Please ensure that the EC Code is exactly same as the Master Organization.
    6) Optionally ensure that in the Register Priorities, highest priority (1) is set against PLA.
    7) Optionally ensure that Allow Negative PLA Balance Flag is checked.
    Also make sure that all objects (triggers, packages etc) that are related to localization are valid.

  • Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CR...

    Post Author: lkamesam
    CA Forum: Integrated Solutions
    Hi,
            I am running Crystal Reports version 10 from IBM Rational 6.0.1  build 20050725_1800 XML data source. When I try to run the report under WAS 6.0.1 I get the following error:
    Does any body have any clue how to resolve my problem? Thanks
    Error 500: Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CRDB_XMLImpl This is often caused by having the class at a higher point in the classloader hierarchy Dumping the current context classloader hierarchy: ==> indicates defining classloader *** indicates classloader where the missing class could have been found ==>&#91;0&#93; com.ibm.ws.classloader.CompoundClassLoader@163dd786 Local ClassPath: C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\classes;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\bobj_platform_jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cecore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\celib.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ceplugins.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cereports.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cesession.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\clientlogic.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\Concurrent.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CorbaIDL.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLExternal.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLServer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCharting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalContentModels.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExporters.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExportingBase.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalFormulas.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalQueryEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportingCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ebus405.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\icu4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jrcerom.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jsf_common.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\keycodeDecoder.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\log4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\MetafileRenderer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rasapp.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rascore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rpoifs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\serialization.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\URIUtil.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting-jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xercesImpl.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xmlParserAPIs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent; Delegation Mode: PARENT_FIRST &#91;1&#93; com.ibm.ws.classloader.JarClassLoader@338761606 Local Classpath: Delegation mode: PARENT_FIRST &#91;2&#93; com.ibm.ws.classloader.ProtectionClassLoader@38e75786 &#91;3&#93; com.ibm.ws.bootstrap.ExtClassLoader@7e475784 &#91;4&#93; sun.misc.Launcher$AppClassLoader@7e5a5784 &#91;5&#93; sun.misc.Launcher$ExtClassLoader@7e565784 -Original exception- java.lang.NoClassDefFoundError: OCA/OCAdbdll/DbDLLOperations at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code)) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:576) at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code)) at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code)) at com.crystaldecisions.reports.queryengine.driver.i.<init>(Unknown Source) at com.crystaldecisions.reports.queryengine.driver.i.case(Unknown Source) at com.crystaldecisions.reports.queryengine.av.ak(Unknown Source) at com.crystaldecisions.reports.queryengine.av.else(Unknown Source) at com.crystaldecisions.reports.queryengine.av.byte(Unknown Source) at com.crystaldecisions.reports.queryengine.av.do(Unknown Source) at com.crystaldecisions.reports.queryengine.as.new(Unknown Source) at com.crystaldecisions.reports.queryengine.at.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source) at com.crystaldecisions.reports.common.ab.a(Unknown Source) at com.crystaldecisions.reports.common.ab.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown Source) at com.crystaldecisions.report.web.a.a.K(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.bx.a(Unknown Source) at com.crystaldecisions.report.web.event.b1.broadcast(Unknown Source) at com.crystaldecisions.report.web.event.as.a(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.if(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source) at com.crystaldecisions.report.web.ServerControl.a(Unknown Source) at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ServerControlTag.doEndTag(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown Source) at com.ibm._jsp._sample._jspx_meth_crviewer_viewer_0(_sample.java:135) at com.ibm._jsp._sample._jspService(_sample.java:77) at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:88) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1212) at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:629) at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:117) at com.ibm.ws.jsp.webcontainerext.JSPExtensionServletWrapper.handleRequest(JSPExtensionServletWrapper.java:171) at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:230) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2837) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021) at

    For those who would have the same problem, here is how I could eventually fix it.
    Since the Flex Test Drive is sometimes out of sync with flash builder 4, I recreated a project using other help pages on Adobe site :
    Entry point :
    http://help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08- 7ffd.html
    As suggested, I used the New Project wizard to create a new project, with :
    Application server type : J2EE
    Check the radio button "Use remote object access service : BlazeDS"
    Then, as indicated in following pages (section "Accessing BlazeDS")... :
    file:///C:/Mes%20documents%20C/Commun/Developpement/Documentation/HT-Tracks/AccessingData/ help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08-7ffe.ht ml#WSbde04e3d3e6474c4-19a3f0e0122be55e1b7-8000
    ...I selected the "Data / Connect to Data/Services..." menu option, which started the Data/service connection wizard.
    There, I selected a BlazeDS (and not Web Services) service type, and everything went fine.
    Suggestion to adobe staff : maybe it would be useful to update the Flex Test Drive to reflect Flash Builder 4 ?
    Very nice product anyway, so far, congratulations...
    Rgds
    Marc.

  • Getting Connection error while creating Substituion Rule in UWL

    Hi Everybody,
    Getting below error while creating Substitution Rules in UWL.
    "error for the u201Cconnectionu201D to SAP_R3_Finance ".
    Can be able to see all Work Items belongs to me. getting the errror while creating Substitution Rule only..
    Could anybody tell me what might be the Reason what steps i need to take to resolve this issue.
    Thanks,
    Naveen Kumar

    Hi Uds,
    are you running SOA Suite on a Linux server and not on your PC and just running JDeveloper on your PC?
    If so try creating the repository file specifying a directory on the Linux server.
    For example to:
    /tmp/sample_repository
    So Choose 'File' from drop down menu
    Enter /tmp/sample_repository
    Click on create button
    This should create the file called sample_repository in /tmp on the Linux server.
    Can you tell us what your environment is?
    Regards Cel

  • Error while activating update rule in Inventory

    I was working with migration of datasource 2LIS_03_BF from 3.x to 7.0 in MM module.
    Recieved an error while activating update rule  0RT_C17 2LIS_03_BF in Inventory module.
    When I checked the routine ,it shows the following error.
    Errror:E:The Dictionary structure or table "/BI0/PMAT_SALES" is either not active or does not exist.
    I am not usre how to resolve this.
    Kindly reply asap.

    1. Activate the master data infoobject for 0MAT_SALES at info object level of RSA1
    2. Replicate and Activate the data source once again by using the program > SE38 : RS_TRANSTRU_ACTIVATE_ALL
    3. Then try to migrate you datasource and activate you update rules.
    it may help you
    Regards.
    Rambabu

  • Error while migrating business rules

    While trying to use the export/import option in EAS to migrate business rules, we have run into an error.
    The export itself is fine. When trying to import, it says this:(even though it lets me select the proper xml file for importing)
    Error while migrating business rules.
    Detail: The import file specified is not a valid business rules xml file. Import will be terminated.
    Detail:Exception occured. Please check your log file for details.
    I am pretty sure I used the inherent format specified for exporting the business rules.
    Both the old and new systems are version 11.1.2.
    The LCM method also failed for the business rules migration.
    Any suggetions?
    Thanks,
    Sujani

    When you export them make sure you don't have "For Calc Mgr" checked, if you do then the import with fail.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Rule Execution : Error while executing a rule session unit of work

    Error while executing a rule session unit of work.
    The rule session CreditRule:130002 failed to execute a unit of work.
    Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
    I have created a simple rule and using a decision service and a decide process activity I have tried to run the orchestration.
    After compiling and saving and re-opening the orchestration flow looks correct.
    When I execute the process I get the above error.
    Is this something wrong with the Rule ?
    Can anyone offer any advice
    Thanks
    Cliff

    Hi.
    Any further advice on this issue?
    Getting the same problem and cannot figure out a solution.
    How do I check the "underlying exception" btw?

Maybe you are looking for