Error While Loding Time Dimension
Hello
I have a requirement in which i need to load the data into Time dimension so i mapped the data from Time dimension which Oracle Creates
While deploying i am getting an Error which says there is an error in Time Dimension Package which is created by oracle and
Can anyone tell me where should i go to rectify the error
Thanks
Sriks
Did the mapping validate ok?
If validation was ok, locate the package on the DB (same name as mapping) and compile it, this should give you more information on what is causing the error e.g. table does not exist etc.
Si
Similar Messages
-
ERROR while loading time dimension table
i need to load time dimension from csv to oracle table, while loading i got the error.
my source data type is date and target is date.
ODI-1226: Step sample day fails after 1 attempt(s).
ODI-1240: Flow sample day fails while performing a Loading operation. This flow loads target table W_SAMPLE_DATE.
ODI-1228: Task SrcSet0 (Loading) fails on the target ORACLE connection Target_Oracle.
Caused By: java.sql.SQLException: ORA-30088: datetime/interval precision is out of range
while creating c$ table
create table WORKSCHEMA.C$_0W_SAMPLE_DATE
C3_ROW_WID NUMBER(10) NULL,
C1_CALENDAR_DATE TIMESTAMP() NULL,
C2_DAY_DT TIMESTAMP() NULL
)check the source data and use the correct function eg TO_DATE(SRC.DATE, 'MM?DD/YYYY') use NVL if required.
-
Error while processing a dimension
Hi,
While processing my Time dimension, am gettin the error ""Object reference not set to an instance of an object"
and "Exception of type System.exception is thrown" .
Kindly let me know if anyone has any suggestions/solution
Thanks,
RajHi,
I'm getting this too, except it's happening for about half of the dimensions in ApShell. It's a brand new install.
BPC7.5 for MS (SP5)
Windows Server 2008R2 64-bit
SQL 2008R2
Office 2007 SP2
I'm trying the initial 'Process Dimension' step for the ApShell application set.
Some of the dimensions (C_ACCT, C_Category, C_DataSrc, Entity) process fine, but others (Category, P_Activity, P_ACCT) fail with the error "Object reference not set to an instance of an object."
The full error from the log is:
{System.NullReferenceException: Object reference not set to an instance of an object.
at Osoft.Services.Platform.YukonAdmin.Olap9Manager.AddTableToAppDef(Collection colCube, DataSourceView& oDefView, String strDimName, String strDimType, DataTable oTable, String strCommand, Int32 intMaxHier, String& strMsg, Boolean bOnlySharedDim)}
Any ideas?
I'm new to BPC, can someone tell me if it's right that I only see these dimensions in the cube?
Groups
IntCo
C_Category
C_DataSrc
Entity
C_ACCT
O_ACCT
FLOW
Or should I be seeing all the dimensions I see in the admin console? -
Hi,
Pls help me to solve my problem. My coding is comple well while run time it showing me the error,
Fatal Error: The value of attribute "xsi:schemaLocation" associated with an element type "null" must not contain the '<' character.
The value of attribute "xsi:schemaLocation" associated with an element type "null" must not contain the '<' character.pls help me as soon as possibleIt's not your coding. The XML document which contains that attribute is not well-formed.
-
Error while creating Time Card Using API
Hello
I have a requirement to run OTL Interface once day to create/update Time Card in OTL for those datea created on sysdate-1 in Service Module (data will get feeded from Service Module). For example this interface will run on sysdate to create time cards for those data created in the service module on sysdate-1.
I have some sample data and code I am using but it is erroring out with different errors..Can anybody help me on this
My Interface should run as expected below and my time card range will be Monday 24-Dec-2012 to Sunday 30-Dec-2012
Interface Run Date Time Entry to process
25-Dec-2012 24-Dec-2012 Data
26-Dec-2012 25-Dec-2012 Data
CREATE OR REPLACE PROCEDURE main_process (o_errbuf OUT VARCHAR2,
o_ret_code OUT NUMBER,
l_chr_from_date IN VARCHAR2,
l_chr_to_date IN VARCHAR2)
IS
l_chr_skip VARCHAR2 (1);
l_chr_task_exists VARCHAR2 (100);
l_chr_error_msg VARCHAR2 (4000);
l_num_tbb_id NUMBER;
l_num_request_id NUMBER := fnd_global.conc_request_id;
l_num_login_id NUMBER := fnd_global.login_id;
l_num_user_id NUMBER := fnd_global.user_id;
l_num_resp_id NUMBER := fnd_Profile.VALUE ('resp_ID');
l_num_otl_appl_id CONSTANT NUMBER (3) := 809; -- This is the appl_id for OTL, do not change
l_chr_proj_attr1 CONSTANT VARCHAR2 (7) := 'Task_Id';
l_chr_proj_attr2 CONSTANT VARCHAR2 (10) := 'Project_Id';
l_chr_proj_attr3 CONSTANT VARCHAR2 (16) := 'Expenditure_Type';
l_chr_proj_attr4 CONSTANT VARCHAR2 (19) := 'Expenditure_Comment';
l_chr_proj_attr5 CONSTANT VARCHAR2 (23) := 'SYSTEM_LINKAGE_FUNCTION';
i_num_count NUMBER;
i_num_rows_inserted NUMBER := NULL;
l_chr_message fnd_new_messages.MESSAGE_TEXT%TYPE;
l_chr_hdr_eligible VARCHAR2 (5);
l_tbl_timecard_info hxc_self_service_time_deposit.timecard_info;
l_tbl_attributes_info hxc_self_service_time_deposit.app_attributes_info;
l_tbl_messages hxc_self_service_time_deposit.message_table;
l_new_timecard_id NUMBER;
l_new_timecard_ovn NUMBER;
l_num_time_building_block_id hxc_time_building_blocks.time_building_block_id%TYPE;
I NUMBER; --PENDING REMOVE
l_message VARCHAR2 (2000); --PENDING REMOVE
l_time_building_block_id NUMBER; --PENDING REMOVE
CURSOR process_line
IS
SELECT ROWID ROW_ID, a.*
FROM xxpowl.xxpowl_hxt_otl_intf a
WHERE 1 = 1 --a.request_id = l_num_request_id
AND a.status_flag = 'NEW' -- 'VALID'
AND a.error_desc IS NULL
AND a.service_activity_type IS NOT NULL;
BEGIN
FND_FILE.PUT_LINE (
fnd_file.LOG,
'Entered From Date:'
|| (TO_DATE ( (l_chr_from_date), 'YYYY/MM/DD HH24:MI:SS')));
FND_FILE.PUT_LINE (
fnd_file.LOG,
'Entered To Date:'
|| (TO_DATE ( (l_chr_to_date), 'YYYY/MM/DD HH24:MI:SS')));
FND_GLOBAL.APPS_INITIALIZE (user_id => l_num_user_id,
resp_id => l_num_resp_id,
resp_appl_id => l_num_otl_appl_id);
BEGIN
FND_FILE.PUT_LINE (
fnd_file.LOG,
'Inserting the data in the custom table XXPOWL_HXT_OTL_INTF');
INSERT INTO xxpowl.XXPOWL_HXT_OTL_INTF (SR_NUMBER,
PROJECT_TASK_OWNER,
PROJECT_TASK_OWNER_PERSON_ID,
PROJECT_ID,
PROJECT_TASK_ID,
ASSIGNEE,
ASSIGNEE_ID,
ASSIGNEE_PERSON_ID,
ASSIGNEE_SUPERVISOR_PERSON_ID,
TASK_NUMBER,
PARENT_TASK_NUMBER,
DEBRIEF_NUMBER,
DEBRIEF_HEADER_ID,
DEBRIEF_DATE,
TASK_ASSIGNMENT_ID,
DEBRIEF_OBJECT_VERSION_NUMBER,
DEBRIEF_PER_COMPLETE,
DEBRIEF_LINE_ID,
DEBRIEF_PROCESS,
SERVICE_ACTIVITY,
SERVICE_ACTIVITY_TYPE,
INVENTORY_ITEM_ID,
ITEM,
BUSINESS_PROCESS_ID,
DEBRIEF_TRANSACTION_TYPE_ID,
DEBRIEF_UOM_CODE,
DEBRIEF_HOURS,
CONV_DEBRIEF_IN_HOURS,
DEBRIEF_START_TIME,
DEBRIEF_END_TIME,
DEBRIEF_SERVICE_DATE,
NOTES,
OTL_ELIGIBLE_FLAG,
NOTIF_SENT_FLAG,
NOTIF_ELIGIBLE_FLAG,
ERROR_DESC,
STATUS_FLAG,
INITIAL_NOTIF_SENT_DATE,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
LAST_UPDATE_LOGIN,
REQUEST_ID,
INITIAL_REQUEST_ID)
(SELECT b.incident_number sr_number,
h.resource_name project_task_owner,
h.source_id project_task_owner_person_id,
b.external_attribute_1 project_id,
b.external_attribute_2 project_task_id,
jtf_task_utl.get_owner (d.resource_type_code, d.resource_id)
assignee,
d.resource_id assignee_id,
jrre.source_id assignee_person_id,
paa.supervisor_id assignee_supervisor_person_id,
c.task_number task_number,
(SELECT task_number
FROM jtf_tasks_b z
WHERE c.parent_task_id = z.task_id)
parent_task_number,
a.debrief_number,
a.debrief_header_id debrief_header_id,
a.debrief_date debrief_date,
a.task_assignment_id task_assignment_id,
a.object_version_number debrief_object_version_number,
a.attribute1 debrief_per_complete,
e.debrief_line_id debrief_line_id,
cbp.name debrief_process,
cttv.name service_activity,
DECODE (cttv.attribute1,
'Y', 'Service-Billable',
'N', 'Service-Non Billable')
service_activity_type,
e.inventory_item_id inventory_item_id, --f.segment1 item,
(SELECT segment1
FROM mtl_system_items_b f
WHERE e.inventory_item_id = f.inventory_item_id
AND f.organization_id = b.inv_organization_id)
item, --241 --Mater Org
e.business_process_id business_process_id,
e.transaction_type_id debrief_transaction_type_id,
e.uom_code debrief_uom_code,
e.quantity debrief_hours,
(g.conversion_rate * e.quantity) conv_debrief_in_hours,
e.labor_start_date debrief_start_time,
e.labor_end_date debrief_end_time,
e.service_date debrief_service_date,
(SELECT note_tl.notes
FROM JTF_NOTES_B NOTE, JTF_NOTES_TL NOTE_TL
WHERE NOTE.JTF_NOTE_ID = NOTE_TL.JTF_NOTE_ID
AND NOTE_TL.LANGUAGE = USERENV ('LANG')
AND NOTE.SOURCE_OBJECT_ID = a.DEBRIEF_HEADER_ID
AND note.jtf_note_id =
(SELECT MAX (note1.jtf_note_id)
FROM JTF_NOTES_B note1
WHERE NOTE1.SOURCE_OBJECT_ID =
a.DEBRIEF_HEADER_ID))
notes,
'Y',
'N',
'X',
NULL,
'NEW',
NULL,
SYSDATE,
l_num_user_id,
SYSDATE,
l_num_user_id,
l_num_login_id,
l_num_request_id,
l_num_request_id
FROM csf_debrief_headers a,
cs_incidents_all_b b,
jtf_tasks_b c,
jtf_task_assignments d,
csf_debrief_lines e, --mtl_system_items_b f,
mtl_uom_conversions g,
jtf_rs_resource_extns_vl h,
cs_business_processes cbp,
cs_transaction_types_vl cttv --, cs_sr_task_debrief_notes_v notes
jtf_rs_resource_extns_vl jrre,
per_all_assignments_f paa
WHERE a.task_assignment_id = d.task_assignment_id
AND d.task_id = c.task_id
AND c.source_object_id = b.incident_id
AND c.source_object_type_code = 'SR'
AND a.debrief_header_id = e.debrief_header_id
AND e.uom_code = g.uom_code
AND g.uom_class = 'Time'
AND b.incident_owner_id = h.resource_id(+)
AND e.business_process_id = cbp.business_process_id
AND e.transaction_type_id = cttv.transaction_type_id
AND d.resource_id = jrre.resource_id
AND jrre.source_id = paa.person_id --= 181
AND TRUNC (SYSDATE) BETWEEN paa.effective_start_date
AND paa.effective_end_date
AND TRUNC (e.last_update_date) BETWEEN TO_DATE (
(l_chr_from_date),
'YYYY/MM/DD HH24:MI:SS')
AND TO_DATE (
(NVL (
l_chr_to_date,
l_chr_from_date)),
'YYYY/MM/DD HH24:MI:SS')
AND NOT EXISTS
(SELECT 1
FROM xxpowl.XXPOWL_HXT_OTL_INTF old
WHERE old.debrief_header_id =
e.debrief_header_id
AND old.task_number = c.task_number
AND TRUNC (old.DEBRIEF_SERVICE_DATE) =
TRUNC (e.SERVICE_DATE)
AND old.DEBRIEF_TRANSACTION_TYPE_ID =
e.TRANSACTION_TYPE_ID
AND old.request_id <> l_num_request_id
AND old.DEBRIEF_UOM_CODE = e.uom_code
AND old.DEBRIEF_HOURS = e.quantity));
i_num_rows_inserted := SQL%ROWCOUNT;
fnd_file.put_line (fnd_file.LOG,
'No of rows Inserted:' || i_num_rows_inserted);
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| 'Error while Inserting debrief lines data into custom table.Error: '
|| SQLERRM
|| '. Exiting the interface without processing further';
fnd_file.put_line (fnd_file.LOG, l_chr_error_msg);
ROLLBACK;
RETURN;
END;
FOR process_line_rec IN process_line
LOOP
l_chr_error_msg := NULL;
l_tbl_timecard_info.delete;
l_tbl_attributes_info.delete;
l_tbl_messages.delete;
l_new_timecard_id := NULL;
l_new_timecard_ovn := NULL;
l_num_time_building_block_id := NULL;
l_chr_message := NULL;
i_num_count := 0;
l_num_tbb_id := NULL;
BEGIN
hxc_timestore_deposit.create_time_entry (
p_measure => process_line_rec.conv_debrief_in_hours,
p_day => TO_DATE ( (process_line_rec.debrief_service_date),
'DD/MM/RRRR'),
p_resource_id => process_line_rec.assignee_person_id,
p_comment_text => process_line_rec.notes
|| '....Remove this notes in the code logic....Request Id:'
|| l_num_request_id, --pending lokesh
p_app_blocks => l_tbl_timecard_info,
p_app_attributes => l_tbl_attributes_info,
p_time_building_block_id => l_num_time_building_block_id);
fnd_file.put_line (
fnd_file.LOG,
'Step#1 completed, TIME_BUILDING_BLOCK_ID:'
|| l_num_time_building_block_id);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#1 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Classify Time
-- Attribute1
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'Task_Id',
p_attribute_value => process_line_rec.project_task_id,
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#2 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Attribute2
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'Project_Id',
p_attribute_value => process_line_rec.project_id,
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#3 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Attribute3
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'Expenditure_Type',
p_attribute_value => 'Service-Billable',
-- p_attribute_value=> 'Service-Non Billable',
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#4 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Attribute4
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'Expenditure_Comment',
p_attribute_value => 'Expenditure Comment created by API',
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#5 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
-- Attribute5
hxc_timestore_deposit.create_attribute (
p_building_block_id => l_num_time_building_block_id,
p_attribute_name => 'SYSTEM_LINKAGE_FUNCTION',
p_attribute_value => 'ST',
p_app_attributes => l_tbl_attributes_info);
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#6 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM;
END;
BEGIN
hxc_timestore_deposit.execute_deposit_process (
p_validate => FALSE,
p_app_blocks => l_tbl_timecard_info,
p_app_attributes => l_tbl_attributes_info,
p_messages => l_tbl_messages,
p_mode => 'SAVE', -- p_mode-> 'SUBMIT', 'SAVE', 'MIGRATION', 'FORCE_SAVE' or 'FORCE_SUBMIT'
p_deposit_process => 'OTL Deposit Process',
p_timecard_id => l_new_timecard_id,
p_timecard_ovn => l_new_timecard_ovn);
COMMIT;
hxc_timestore_deposit.log_messages (p_messages => l_tbl_messages);
IF (l_tbl_messages.COUNT <> 0)
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error in INSERT API CALL at Step#7 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM
|| '.API Error messages are:';
i_num_count := l_tbl_messages.FIRST;
LOOP
EXIT WHEN (NOT l_tbl_messages.EXISTS (i_num_count));
l_chr_message :=
fnd_message.get_string (
appin => l_tbl_messages (i_num_count).application_short_name,
namein => l_tbl_messages (i_num_count).message_name);
fnd_file.put_line (
fnd_file.LOG,
(l_tbl_messages (i_num_count).message_name));
l_chr_error_msg := l_chr_error_msg || l_chr_message || '.';
i_num_count := l_tbl_messages.NEXT (i_num_count);
END LOOP;
END IF;
EXCEPTION
WHEN OTHERS
THEN
fnd_file.put_line (
fnd_file.LOG,
'**** Error.....Inside Exception Block in execute_deposit_process');
BEGIN
hxc_timestore_deposit.log_messages (
p_messages => l_tbl_messages);
EXCEPTION
WHEN OTHERS
THEN
fnd_file.put_line (
fnd_file.LOG,
'*****Error....Inside Exception Block in hxc_timestore_deposit.log_messages.Error:'
|| SQLERRM);
END;
l_chr_error_msg :=
l_chr_error_msg
|| 'Error in INSERT API CALL at Step#7 for the debrief line id: '
|| process_line_rec.debrief_line_id
|| '.Error:'
|| SQLERRM
|| '.API Error messages are:';
IF (l_tbl_messages.COUNT <> 0)
THEN
i_num_count := l_tbl_messages.FIRST;
LOOP
EXIT WHEN (NOT l_tbl_messages.EXISTS (i_num_count));
l_chr_message :=
fnd_message.get_string (
appin => l_tbl_messages (i_num_count).application_short_name,
namein => l_tbl_messages (i_num_count).message_name);
l_chr_error_msg := l_chr_error_msg || l_chr_message || '.';
i_num_count := l_tbl_messages.NEXT (i_num_count);
END LOOP;
END IF;
END;
COMMIT;
IF l_chr_error_msg IS NOT NULL OR l_new_timecard_id IS NULL
THEN
fnd_file.put_line (fnd_file.LOG,
'***** Error *****' || l_chr_error_msg);
o_ret_code := 1;
END IF;
BEGIN
fnd_file.put_line (
fnd_file.LOG,
'Updating the status of the record in custom table for debrief_line_id:'
|| process_line_rec.debrief_line_id);
UPDATE xxpowl.XXPOWL_HXT_OTL_INTF
SET status_flag =
DECODE (
l_chr_error_msg,
NULL, DECODE (
l_new_timecard_id,
NULL, 'FAILED',
DECODE (SIGN (l_new_timecard_id),
'1', 'SUCESS',
'FAILED')),
'FAILED'),
time_building_block_id = l_new_timecard_id,
last_update_date = SYSDATE,
request_id = l_num_request_id,
last_updated_by = l_num_user_id,
error_desc = l_chr_error_msg
WHERE ROWID = process_line_rec.row_id;
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
l_chr_error_msg :=
l_chr_error_msg
|| '.Error while updating the status to SUCCESS.Error: '
|| SQLERRM;
END;
END LOOP; --process_line
EXCEPTION
WHEN OTHERS
THEN
FND_FILE.PUT_LINE (
fnd_file.LOG,
'Unknown/Unhandlled Exception Error......' || SQLERRM);
o_ret_code := 2;
END main_process;
SHOW ERR;
Error Messages:
1. Error in INSERT API CALL at Step#7 for the debrief line id: 41011.Error:ORA-00001: unique constraint (HXC.HXC_ROLLBACK_TIMECARDS_PK) violated.
2. Error in INSERT API CALL at Step#7 for the debrief line id: 41011.Error:ORA-00001: unique constraint (HXC.HXC_LATEST_DETAILS_FK) violated
Thanks a lot for the help!Hello
We will get this error message when we run this from application other than "Time and Labor Engine". So try to run this concurrent program (if you registered as a conc. program) from Time and Labor Engine application.
--Lokesh -
Java Character set error while loding data using iSetup
Hi,
I am getting the following error while migrating settup data from R12 (12.1.2) Instance to another R12 (12.1.2) Instance, Both the Database has same DB character set (AL32UTF8)
we are getting this error while migrating any setup data
Actual error is
Downloading the extract from central instance
Successfully copied the Extract
Time taken to download Extract and write as zip file = 0 seconds
Validating Primary Extract...
Source Java Charset: AL32UTF8
Target Java Charset: UTF-8
Target Java Charset does not match with Source Java Charset
java.lang.Exception: Target Java Charset does not match with Source Java Charset
at oracle.apps.az.r12.common.cpserver.PreValidator.validate(PreValidator.java:191)
at oracle.apps.az.r12.loader.cpserver.APILoader.callAPIs(APILoader.java:119)
at oracle.apps.az.r12.loader.cpserver.LoaderContextImpl.load(LoaderContextImpl.java:66)
at oracle.apps.az.r12.loader.cpserver.LoaderCp.runProgram(LoaderCp.java:65)
at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Error while loading apis
java.lang.NullPointerException
at oracle.apps.az.r12.loader.cpserver.APILoader.callAPIs(APILoader.java:158)
at oracle.apps.az.r12.loader.cpserver.LoaderContextImpl.load(LoaderContextImpl.java:66)
at oracle.apps.az.r12.loader.cpserver.LoaderCp.runProgram(LoaderCp.java:65)
at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Please help in identifying and resolving the issue
SachinThe Source and Target DB character set is same
Output from the query
------------- Source --------------
SQL> select value from nls_database_parameters where parameter='NLS_CHARACTERSET';
VALUE
AL32UTF8
And target Instance
-------------- Target----------------------
SQL> select value from nls_database_parameters where parameter='NLS_CHARACTERSET';
VALUE
AL32UTF8
The Error is about Source and Target JAVA Character set
I will check the Prevalidator xml from How to use iSetup and update the note
Thanks
Sachin -
Error while processing the dimension
Multiple Specification of the Name 'HIR' as a Component Name (Component 6)
this is the error i am geting while processing the dimensionHi,
Do you get this error while processing all the dimension or only in specific dimension?
Do you have hierarchies in this dimension? Have you added the hierarchy in the property (you should not). -
Error While processing an Dimension
Hi Experts,
while processing an Dimension i am getting an error while processing, but in the BW it is showing 2 Dimension.
How to check which is the Latest/ Right one.
Kindly Help
Best Regards,
Bhupendra AryaHi,
You can find the details of diemnsions and its infoobject technical name in the table UJA_DIMENSION.
The filed TECH_NAME holds the infoobject technical name in BW for a particular dimension in BPC.
Hope this helps.
Regards,
Balraj. -
Error in creating time dimension
Hi,
I created a simple time dimension with two levels: year and month, and each level has one element that serves as chronological key. This is the error I got when checking global consistency:
"The physical table 'my time table' , which is part of a time dimension table, is also used in the logical table 'my time table', which is not part of any dimension".
What does it exactly mean?
Thanks for any assistance.Hi ,
Please provide details about how you are bringing in the table into presentation layer , its seems like the table is taken as a fact table by the tool , its very important how you are defining the relationship in the logical diagram.Some times its easier to bring a dummy table along in the physical layer and make a sensible logical diagram, since you are trying to create a time dimension you want it to have drillability , so you have to create a hierarchy on the same table.The key here is to make sure the tool understands what you really want ,sometimes you have to work around since the logical diagram is the only way the tool makes sense of the tables brought in.
Thank you,
Mohammad Farhan Alam -
#SYNTAX error while using Merge Dimension in webi report
Hi All,
# Syntax error when using merge dimension in webi report
screen shot has been attached.
iam using BO 4.0 SP6
checked the datatypes in BW
they are same in BW in both the queries
i followed the given links but no result.
https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3138343530303526
https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3136323339323126
https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3137353438313026
http://scn.sap.com/thread/3592588#15241008
Need Help!!!!!
Regards
SushmaHi Mark,
Thanks for the reply,
I did not use any formula,
I used merge dimension
Anyways i tried in other system,it s working fine.
Regards
sushma -
Error while activating Account Dimension in BPC 10
Hi All,
While trying to activate the Account Dimension, it is giving an error. Please see the screenshot below. Please let me know if someone has faced this issue before and has solved this.
Thanks in advance,
Best Regards,
VenkataHi Bhupi -
Go to SU53 T-code from the back end , you can find the authorization issues; It will clearly mention what authorizations are missing in Red.
Hope this helps!!! -
Some simple error while booting time
while inastalling on x11 i am getting error mesg
host sendmail " 717 : mu unqualified hostname abc unknown sleeping for retry
host sendmail "717 unable qualified my own domain name --using at
what is this error and what have to doDear Lion - o
I accept your words but there is no DNS domiain setup,
It's a simple intel PC where we are loading Solaris 10 for R&D.
After the OS is loaded when we restart the pc after some booting process we are getting this error message that
Unqualified HOST name
But probably the message flashes for twice or thrice and the system proceeds booting further
BUt how to prevent this message from poping up every time we restart our system and if there is any entry that we need to put in any file.lets explain me the same if there is so
Regds
Suseendran .A
919213540324 -
Error while uploading time sheet
Dear Consultant,
We have negative time management system. We do not run payroll on SAP but have Time Management System. We upload Timesheets in SAP using CAT2. While uploading Timesheets we got error as
" SUBMIT authorization GVAL required for program RGUGBR00".
What could be the reason?
Regards
Bindumadhavseems authrisation issue
contact ur Basis admin -
Error while updating time sheet with BAPI_CATIMESHEETMGR_INSERT
Hi Gurus,
We are uploading data from 3rd party software to SAP with Z program.
In this Z program using BAPI_CATIMESHEETMGR_INSERT.
While updating data manually with CAT2 or with BAPI, data is entered properly without any problem but while using the bapi in Z program error message " Version 0 is not set up for controlling area" is coming .
Hence Version 0 is already active for the controlling area for fiscal year 2010.
Please help me to resolve the issue.
Thanks,
Neha Duseja- First - Try to accomplish this via transaction CAT2 (*) (and then CATA or CAT6 to upload data to HR) - You may require some Customizing here ([Entry of Attendances and Absences for HR Time Management|http://help.sap.com/saphelp_bw/helpdata/en/64/400456470211d189720000e8322d00/frameset.htm])
- Then - Use the same values in [BAPI_CATIMESHEETMGR_INSERT|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_catimesheetmgr_insert#sdn_content_category_value_wiki]
Regards,
Raymond
(*) Or ask to your functional -
Error while configuring Facet dimension as a Month (Jan..Dec)
Dear All,
In SAP BusinessObjects Explorer, I am getting the attached error when I choose to display a dimension 'Month' ( contains values 'January', 'February' .. , 'December') as Dimension with 'Month ( Jan to Dec)'.
The error message is as below :
The prompts module failed to initialize.
Server error occurred while analyzing the prompt. (PS 50201)
Details : The creation of the prompt input session failed.
No objects have been modified or deleted in the universe.
The current System configuration is
BI 4.0 SP6
Database: Sybase ASE 15.5
I followed the below process :
1. Go to 'Manage Spaces'
2. Select the universe
3. Select the explorer and click on 'Index Now'.
4. After indexing is successful, select 'Configure'
5. Go to the 'Objects' tab and add the dimension 'Month' from the universe as a Facet.
6. Select the facet 'Month' and under the Details section, in Dimension drop-down; select 'Months (Jan..Dec)'
7. click on Validate
Thanks and Regards,
PrathmeshHi Nakul,
Below is the overview
Database Level : datatype is Date
Universe : extract the month and using 'case.. when' convert it to respective month names as January, February, March etc
Explorer Level : I have 2 dimensions as 'Month_Name' (derived month name form date) and 'Date' ( the date column)
The 'Date' dimension only lets me choose 'Standard' option while the others are disabled
The 'Month_Name' dimension lets me choose the 'Month ( Jan to Dec)' option but gives the error.
I hope this explains my scenario
Thanks and Regards,
Prathmesh Pai
Maybe you are looking for
-
Screen Blanks (ACPI) on VivoBook after upgrade
When I boot normally, I get to select my GRUB option, type my password for my encrypted partition, and then then screen goes blank and stays blank. I have found that if I plug in a VGA cable the monitor will show a prompt to login, and I can start X
-
Sharing Time Machine Back Up with Desktop and MacBook
Hello, In preparation for my work on the road I back up my desktop using Time Machine on my Time Capsule, wipe my MacBook clean and Migrate my files to the MacBook so I can take everything. In recent years I notice when syncing my devices, that proce
-
One old iTunes account and an iPad with a new .me account
I'm trying to syn my music from my iMac to my iPad. I have a new .me address for iCloud and Face Time but i have quite a lot of music brought in iTunes on my old iTunes account. in order for my mac to accept my iPad I understand the iPad needs to be
-
ALV Display by function modules
Hi, I have data in internal table itab, Which having seven columns I want to display all these data in gridlayout by using function modules. Can you please guide me the logic how to do. An also I want to display the headings for each column, then I h
-
How to select settings for pdf version when combining files
Hi all, I was wondering if anyone can tell me if there is a way to set the settings of the resultant pdf, like you can do for word and such (see screenshot). I have pdf's that are 1.4 compliant but when i merge them together they become v1.6 complian