Error while reading data using Function Module /sapapo/msdp_data_read
In my report, function module /sapapo/msdp_data_read is called to get the data from a planning area.
The problem is that, the values returned by this FM are not correct.means its returning wrong Key_figure values.
On checking it was observed that , in the import parameter is_read_options ,
the field flg_aggregate = 'X'.
In Debug mode i cleared this field and called the FM and it returned the correct values.
Can anybody plz tell me what is the relevance of this field flg_aggregate .
Kindly guide.
Thnk you in advance.
Regards ,
Pranali
Dear Pranali,
FLG_AGGREGATE has following importance:
if FLG_AGGREGATE = 'X' and the table ct_cols is empty then key figures for the time period defined through IS_PERIOD will be red aggrerated.
I hope this helps.
Regards,
Tibor
Similar Messages
-
Error while extracting data using function module
Hello,
I created one generic datasource and i want to extract data with the option "Extraction by Function Module".
But when i specified function module name and was trying to save, it thrown a error message saying
'The specified table does not exist'.
What could be the reason?
Please help me out.
Thanks,
Regards,
SteveHi Steve,
Once you execute T.Code RSO2, you need to fill in the details and click Create, specify the Appl. Component and in Extraction by Function Module, give Function Module name and Extrct Structure in the given boxes.
"This structure is used by a DataSource that was created using the transaction RSO2 (generic extraction) and selects data using a function module.
The data must be transferred from this function module to an interface table E_T_DATA."
I'll try to comeup with small piece of code to sort your issue.
Hope it helps!!!!
Amit -
Error while insert data using execute immediate in dynamic table in oracle
Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically. -
Error while reading data for Virtual Infoprovider 0TCT_VC11 and 0TCT_VC12
Hi ,
The standard reports based on 0TCT_VC11 and 0TCT_VC12 are working fine in development system. When we moved the following objects to test system ,
0TCT_VC11 - 0TCT_IS11 & 0TCT_DS11
0TCT_VC12 - 0TCT_IS12 & 0TCT_DS12
We are not able to view data either in the MP nor at the report level.We face the following issue
There is still no data source assigned to VirtualProvider 0TCT_VC11
Error reading the data of InfoProvider 0TCT_VC11
Error while reading data; navigation is possible
Can anybody help me on this.
Regards,
Lavanya.Hello Lavanya,
Please activate the direct access for the virtual providers. Also note that it is only possible to use the BI admin cockpit in a myself system.
Please follow the below steps to activate the same:
TX: RSA1 ->Infoproviders-> Business Information-> BI Statistics->select
Virtual provider-> Go to context menu of the virtual cubes-> Activate
Direct Access. ( Eg virtual cube name )
Please also generate the reports by following the below steps:
RSRT -> Query name -> Generate Report.
Regards,
Arvind -
URGENT : Error: Please create data processing function module
Hi
I am getting the folloiwng error
"Please create data processing function module" in table maintainence.
It is working fine in dev environment but not in QA and production.
Pleae help.
Regards
KalpeshHi Kalpesh,
I see it is something to do with the naming convention used in the quality and production system. These must have been setup differently compared to ur development system. So check with different naming conventions.
Reward points if helpful.
Cheers
Shafiq -
Travel Display Form: Error while determining the form function module
Hi,
In Travel Reqeust (ECC6/ESS) when i click the Display Form after raising the Travel Request it shows the error
"Error while determining the form function module"
Can anyone have idea on this?
Regards,
BoobalanHi,
This error was due to Not supported platforms of ADS (Adobe Document services)
It was not supported on itanium64 bit processors.
Please check where the ADS is supported in service.sap.com/pam
You can use the ADS in the Non-Supported Server by linking it to Supported Platform Server using the SM59 link. This will make the ADS files to work.
Please refer the ADS Config Doc for details.
Hope you also solve this problem.
Regards,
Boobalan -
Error while reading data through External Table!!!
CREATE TABLE "COGNOS"."EXT_COGNOS_TBS9_TEST"
( "ITEM_DESC" VARCHAR2(200 BYTE),
"EXT_CODE" VARCHAR2(20 BYTE),
"RC_DATE" DATE,
"RES_KD_AMNT" NUMBER(18,3),
"RES_FC_AMNT" NUMBER(18,3),
"NRES_KD_AMNT" NUMBER(18,3),
"NRES_FC_AMNT" NUMBER(18,3),
"TOTAL" NUMBER(18,3),
"OF_WHICH_OVR1" NUMBER(18,3)
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY "EXTDATADIR"
ACCESS PARAMETERS
( RECORDS
DELIMITED BY NEWLINE LOAD WHEN *({color:#ff0000}EXT_CODE LIKE 'TBS9%'{color})* FIELDS TERMINATED BY ','
MISSING FIELD VALUES ARE NULL )
LOCATION
( 'TBS9_TEST.CSV'
External table creation went through successfully but am getting error while reading data. Am quite sure error is because of above line in red color. Could you please help me in transforming logic.
Thanks in Advance,
APLet's start with the basics...
1) You state that you are getting an error. What error do you get? Is this an Oracle error (i.e. ORA-xxxxx)? If so, please include the error number and the error message as well as the triggering statement. Or is the problem that rows are getting written to the reject file and errors are being written to the log file? If so, what record(s) are being rejected and what are the reasons given in the log file? Or perhaps the problem is something else?
2) You state that you are quite sure that the problem relates to the hilighted code. What makes you quite sure of this?
Justin -
Error while determining the form function module
Hi everyone,
We are experiencing problems while displaying one adobe form in ESS. Its the Travel Expense form (PTRV_EXPENSE_FORM). When pressing the button to Display/Print the form we get an error message: "Error while determining the form function module", and no form I shown. The ADS server is configured correctly and there are other forms that are actually working, for example the Travel Request form. We are running WAS 7.0 with SP12.
Anyone has an idea what can cause the problem? Any help is greatly appreciated.
Thanks in advance!
Regards,
SophieViktor,
Thank you for your answer, it solved our problem!
Regards,
Sophie -
Error while reading data for reporting
Hi Gurus,
I tried to get answer from the forums but not got exact answer to slove my issue..
Q: I had generated 10 reports on Multiprovider(Virtual cube + std Cube) on Bex analyzer.
But when i am Executing reports 3 reports are getting result where remaining 7 reports are throughing same error.
Error: error reading the data of infoprovider
error system error: no more storege space available for extending an internal table
error massage from data source XXXXXX from Source system XXX
error error occured during parallel processing
error error while reading data, navigation is possible
Where their are no parallel processing are going.
the 3 reports are taking 15 min to generate the report..
data is available in both sources with same selection options.
Can any one please through some light, what exactly need to do to get all the reports and to reduce the response time.
thanks in advance.
SandyHi,
The problem was solved.
I had given restriction on 0COUNTRY with out calling Company code in the Column.
Were 0COUNTRY is also an attribute of 0COMP_CODE.
so i called both in the report and got the report with results...
this is how i solved the issue.
Thanks
Sandy -
Error : J_2IRG1BAL, Create data processing Function module
Sap Experts,
when i go to se11 in which have given table name: J_2IRG1BAL, than i gone menu bar click on utilities select the table contents
click on create entries button.
1) Error Message : Create data processing function module
2) This table Relevant to RG1 Updation
3) Due to this error I am not able to upload the opening stock of finished material manuaaly
4) What are the actions need to be done to rectify the above error.
Regards,
PrabhakarHi
Ask your ABAPER to create the maintainence view of the table
regards
Sanil Bhandari -
Updating liveCache Data using Function Module or ABAP program.
Is it possible to update APO Live Cache using Function Module or ABAP Program.
Will the aggregation/disaggreagation remain the same if data is modified using Function Module or ABAP Program.
Regards,
Vikasello Vikas,
-> Please click at
http://help.sap.com/saphelp_nw04/helpdata/en/f2/0271f49770f0498d32844fc0283645/frameset.htm
& read about 'SAP liveCache'.
As you know objects stored in liveCache in the class containers can be accessed
and manipulated only via LCA routines which are methods of LCA objects.
The registration of the LCA routines is done automatically when
the liveCache is started by the LC10, check the lcinit.log file.
The shared procedures in the LiveCache are written in C++ and shipped
to the customers as binary shared libraries(LCA-Routines) < LCA build >
together with the LiveCache. The original C++ source code of the
libraries is not generally available to the customers.
The LCA routines could be called via "/SAPAPO/OM*" ABAP functions.
-> For SAP liveCache documentation in English:
http://help.sap.com/saphelp_nw04/helpdata/en/f2/0271f49770f0498d32844fc0283645/frameset.htm
< -> Database Administration in CCMS: SAP liveCache -> liveCache Assistant ->
liveCache: Monitoring -> Problem Analysis-> DB Procedures >
In transaction LC10 for the LCA connection choose liveCache:Monitoring
then go to Problem Analysis -> DB Procedures=>
The system displays an overview of all database procedures loaded into
liveCache, their input and output parameters, and other details.
-> Tr. /n/SAPAPO/OM16 ( in further releases /n/sapapo/om19 ) is provided by
SAP to get information about data stored in the LiveCache. If you would
like to get your own views, you should write a special report in ABAP using
"/SAPAPO/OM"-development class functionality.
-> There are standard function modules in ABAP available to extract/change data from/in liveCache.
-> In addition to the given information => find more information at:
SCM 4.0 -> http://help.sap.com/saphelp_scm40/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
SCM 4.1 ->
http://help.sap.com/saphelp_scm41/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
SCM 5.0 ->
http://help.sap.com/saphelp_scm50/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
You can go to the Advanced Planner and Optimizer documentation from the above links < Supply Network Planning Run -> Aggregated Planning -> SNP Disaggregation Or SNP aggregation . >.
If you still have open questions on the posted topic =>
Could you please give more information on your application scenario.
Thank you and best regards, Natalia Khlopina -
Error 65575: overrun error while reading data from NI 9871
Hello everyone,
I am new here. I configured NI 9871 in RS-485 mode to acquire data from a sensor at the data rate of 8 samples per second. While reading data from sensor, sometimes I got the error 65575: "An overrun error has occurred in the data being read. Ensure that the module Flow Control is configured correctly." I didn't understand the error, how can I fix it, what dose the flow control means.
I will be very thankful if anybody help me to fix this error.
Thanks
WasifHello Wasif,
The error you are getting presents itself when the hardware buffer is full and new data is coming in. Data buffer is 64 bytes. One thing to try is to clear the RX FIFO after every read. Please refer to the following link that talks about the method.
http://zone.ni.com/reference/en-XX/help/370984R-01/lvaddon11/crio-9871/
Hope this help you solve the issue.
Regards
Luis S
Application Engineer
National Instruments -
Error while reading data from MapMessage using MDB
Hi,
I have written a small client program to send a message to a queue and an MDB receives the message in the onMessage() method. The message is of type MapMessage. I set key value pairs and send the message in a queue. When I try to read data from MapMessage inside onMessage() method of MDB, I get an exception:-
javax.jms.MessageNotReadableException: In write mode
When I send the message, by default the readonlymode is false. How do I set the mode to readonly exclusively in case of MapMessage ?
SirishaHi,
I do not have any problem with TextMessages...I works fine..It is only with MapMessage that I am not able to read the values..Before sending the message, the message has the flag "readMode" set to false by default by the server...R there any configurations to be made to any files like web.xml or server.xml or jms.xml ?
I am running my JMS application on JDeveloper IDE that has an in-built OC4J server which supports JMS. -
Error in extracting data through function module
Hi All
Need ur help .I am extracting data from crm thru function module.I have copied RSAX_BIW_GET_DATA_SIMPLE and modified it by using code.I am getting an error while testing extraction
Structure I have created ztest_01
Data Source :zmgc_ds1.
There 3 crm tables from where data is picked crmd_orderadm_h,crmd_customer_h,crmd_order_index.
I am attaching the code,can any body help me in correctring the error.Tell me if tthe placing of the code in the template is correct.please give details.
Error which I got:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
not caught in
procedure "RSA3_GET_DATA_SIMPLE" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program "SAPLRSA3" contains the CALL FUNCTION statement.
The name of the function module to be called is "ZRSAX_BIW_GET_DATA_SIMPLE_01"
but "ZRSAX_BIW_GET_DATA_SIMPLE_01" cannot be found in its function group.
Possible reasons:
a) The function module "ZRSAX_BIW_GET_DATA_SIMPLE_01" has not been activated.
Therefore,
it cannot be found at runtime.
b) The Function Library contains an incorrect entry for
"ZRSAX_BIW_GET_DATA_SIMPLE_01".
c) The function module contains no code, even FUNCTION ... ENDFUNCTION
is missing.
You help would be appreciated.
Don't worry about points,.Did you create your function module without problems...assigned the Z* function group? activate the function module? i assume that you copy the function module code and the variables definition on TOP include of RSAX_BIW_GET_DATA_SIMPLE
Regards
Message was edited by:
Oscar Díaz -
RFC Error While Invoking A Remote Function Module.
I am invoking A remote function module while invoking it get an exception when i see the error logs
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Screen output without connection to user. , error key: RFC_ERROR_SYSTEM_FAILURE at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101) at... [see details]
can anyone pls tell me what the error is..
regards
Nilesh Taunk.Hi Nilesh Taunk,
You can go through the following steps
-o JCO Exceptions 1. http://help.sap.com/saphelp_nw04s/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
-o JCO Exceptions 2. http://help.sap.com/saphelp_nw04/helpdata/en/f6/e002416225f023e10000000a155106/frameset.htm
-o Restart of the J2EE instance and try re-importing the RFC model. Sometimes it helps.
-o Logon into WebDynpro Content Administrator as a J2EE Admin and check if the JCO Connections and User /pwd of your application is correct. You can <b>ping </b>or <b>test your JCO connections</b>. if something is wrong, enter the values again for JCO n retest them.
-o Try undeploying or removing the complete application and redeploy it.
Tu undeploy please go to
Go to <b>Visual Admin -> Server -> Services -> Deploy ->
</b>
Under Runtime Tab
select the server, open the tree , you would find the webdypro list there.
Now select an application, first stop it, remove it and redeploy if necessary.
Let us know if you could solve the problem or not, gud luck!
Rgds,
Sreenivas.
Maybe you are looking for
-
Why does iTunes keep cutting all my songs?
I'm getting sick of this problem. I've got about 15 gigabytes of music. About 700 songs or so have been purchased from iTunes, the rest are from CDs I've scanned in. With the purchased songs, it feels like every third song was an incomplete download!
-
How can I use iCloud again after upgrading OS to Mountain Lion? 2 days of trying every password I have ever used, AND changing Apple ID and iTunes ID, still nothing. Can't backup on iCloud anymore.
-
Safari Does Not Open QT Movie (.mov)
Using: Safari Version 3.2.1 (5525.27.1) QT Player 7.6.2 OS X 10.5.6 1. From a web page, I click on a QT movie link named movie.mov. A web page opens with the QT icon only but no movie plays. 2. Pasting the URL from the web page into QT Player yields
-
Bonjour doesn't recognize printer
I have a Vista 64bit machine with a Brother DCP 7020 printer connected via USB. I've installed Bonjour for Windows and it doesn't show the printer. My MBP can see the printer across the Airport network but cannot print. Any ideas why Bonjour isn't sh
-
How to upgade from OS9 FCP to OSX FCP?!
Okay, so I've got an iMac G4 running OSX that I want to install FCP3 on (not enough RAM to run 4/HD). Trouble is, I have a Final Cut 2 installer for OS9, and the FCP3 upgrade installer is OSX, but it appears I have to start my path with FCP2 in OS9!