Error While Redeploying 11.1.2.2 EPMA essbase cube

Hi ,
I have a EPMA esssbase application (11.1.2.2) and having problems while redeployment.
The suppose the Hierarchy of a dimension is like this during 1st deployment :
Dimension+
MemberA
MemberA_1(Store)
MemberA_2(Store)
MemberB
MemberB_1(Store)
MemberB_2(Store)
MemberB_3(Store)
( Dimension has two child MemberA and MemberB
MemberA is Parent of MemberA_1 and MemberA_2
MemberB is Parent of MemberB_1 and MemberB_2 and MemberB_3
This gets deployed fine . Now suppose the MemberB_3 gets is regrouped from MemberB to MemberA . In EPMA I do a "Cut" and "Paste As a Child" on MemberA and it is fine.
Now while validating it does not give me an error. The deployment completes successfully . When I see the outline , I see the following hierarchy -
Dimension+
MemberA
MemberA_1(Store)
MemberA_2(Store)
MemberB_3(Shared)
MemberB
MemberB_1(Store)
MemberB_2(Store)
MemberB_3(Store)
( Dimension has two child MemberA and MemberB
MemberA is Parent of MemberA_1 and MemberA_2 and MemberB_3 as a shared member
MemberB is Parent of MemberB_1 and MemberB_2 and MemberB_3 )
How do I avoid such a happening??
Am I doing anything wrong ??? Any process needs to be followed??? Kindly let me know your thoughts on this.
Currently I have advised the following workaround.
1) Edit from EAS Console - The steps that need to be followed are as follows:
a) Take a data backup of the whole application
b) Regroup the Dimension members as per the new requirement.
c) Deploy the essbase applications.
d) Log into EAS console , and change the Property of the Dimension Members which are shared to Stored and the same dimension members where the property is Stored , change it to shared and save the outline.
e) After the restructuring is complete , again open the outline in the EASconsole and delete the Dimension members which are tagged as shared and then save the outline.
Is this the only way to handle this issue or there is something else. ???
I also tried the following :
a)I deleted a member from EPMA and deployed the application. The deployment was successful . But when I opened the outline , the member(that I deleted from EPMA) was still there.
b) I added a new member to the EPMA and deployed the application. The deployment was successful. When I opened the outline , the member(That I added in EPMA ) was added properly in the outline.
When am adding a new member it gets added properly , but after that when I try changing the properties of that member or a move the member to a new parent or delete the member , EPMA is unable to update the Essbase Application.
Kindly help .
Regards ,
SS

This gets deployed fine . Now suppose the MemberB_3 gets is regrouped from MemberB to MemberA .
Im not sure what you mean by this. Are you purposely trying to make a shared memeber? If so create a another memeber_c and add the shared in there.
Can you clarify?

Similar Messages

Urget Error while deploying the HFm application in EPMA

Dear All
Please suggest me on the below error while i am deploying the HFM application sencond time system throughs the below error. for this what i have to check ??
Error :The 'Test_YearCon' dimension has been modified since the first successful deployment of the application.
Error: The 'Test_Period' dimension has been modified since the first successful deployment of the application.
Thanks in Advace.
Regads.
Rao

you have made modifications in your Year and Period dimensions, even in just the aliases possibly, since the last time the Application was deployed.
it is not allowed to make any modifications to these dimensions after 1st deployment. HFM does not support it.
to get a successful deployment you will need to delete the application and redeploy.
also please make sure you are using the latest Service Pack version of your release of EPMA e.g. if 9.3.1 make sure you are using 9.3.1 Service Pack 3 and fully read the Readme documentation that comes with it.

OBIEE ERROR WHILE TRYING TO RETRIVE THE DATA FROM ESSBASE SOURCE

Hi All,
We have build Essbase ASO Cube and generating the reports through OBIEE.
While we are trying to reteive data with 5-6 dimensions we are getting below error.
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 96002] Essbase Error: Internal MDX API error: invalid cluster offsets (HY000)
SQL Issued: SELECT 0 s_0, "Test Script - Metrics"."Application Details"."Application Full Name" s_1, "Test Script - Metrics"."Application Details"."Tech Executive" s_2, "Test Script - Metrics"."Application Details"."Three Dot Hierarchy" s_3, "Test Script - Metrics"."H0_Ini_Org_Appl"."H0 Initiative" s_4, SORTKEY("Test Script - Metrics"."Application Details"."Application Full Name") s_5, SORTKEY("Test Script - Metrics"."Application Details"."Tech Executive") s_6, SORTKEY("Test Script - Metrics"."Application Details"."Three Dot Hierarchy") s_7, "Test Script - Metrics"."Script Metrics (Historical Trending)"."OverallTotal" s_8 FROM "Test Script - Metrics"
Any Help is appreciated
Thanks,
Reddy

Thanks Deepak.However users dont want to apply any filter.
Any settings needs to be done for Essbase cube as source.
Thanks,
SatyaB

Cpp error in answers with subject area referencing an essbase Cube

Hi!
I'm using obiee 11.1.1.5.0 and essbase cube like subject area.
I have an error doing a simply report. My report contains three columns:
First column: Dimension Entity--> This column has 3 different bins so if I edit fx formula I can see different Case statement.
Second Column: measure (filtered by Scenario=Real)
Third Column: measure (filtered by Scenario=presentation variable (budget))
My report not work when I combine a case statement and different measures filtered by different scenarios. If I delete third column my report works but I need two scenarios
*measure has Sum aggregated in logical layer. (I have tried with default (External Aggr) and doesn't work)
Maybe I have to activate some option of features of Connection Pool in physical layer?
Any help??
thanks!!!

Hello!
This is the error that I can see in answers page:
http://img513.imageshack.us/img513/8479/rq9b.jpg
I need columns that I typed before: Dimension Entity with Bins / Column filtered by Scenario=Real / Column filtered by Scenario=Budget
Any help?

Error while deploying an HFM application in EPMA application

Hi,
I have created an application in HFM and its validating fine. While I try to deply the application by EPMA application library I get the below error;
Detail : Initiating Product Action...
Generating Headers and Callback Information...
Generating Application Data...
Posting Product Request...
**ActiveX component can't create object (HFM:1AD)**
**Action aborted.**
Can anyone please help on this?
Thanks
Jay

This error indicates that the dcom object is not able to launch successfully:
a) Start > Run > DCOMCNFG
b) Expand Component Services > Computers > My Computer > DCOM CONFIG
c) Locate the COMJNIBRIDGE object, right-click and choose "properties"
d) Click on the identity tab and choose "This user" and browse for the FDM Service account and enter/confirm the password
e) Re-test
dcom user must have local security policy rights.
please try these to resolve ur issue, make sure u have backup of the registry before doing this.
Regards,
mady
please mark the replies as helpful or correct
Edited by: mady on May 23, 2013 11:19 AM
Edited by: mady on May 23, 2013 11:21 AM

ERROR while redeploying war file

Hi ,
I am redeploying a war file for jsp application after doing modification in code on Wblogic server. But when i am clicking on Activate changes button i am getting below error in logs:
java.io.IOException: [DeploymentService:290066]Error occurred while downloading files from admin server for deployment request "1,343,372,309,744". Underlying error is: "[DeploymentService:290015]Domain wide secret mismatch"
     at weblogic.deploy.service.datatransferhandlers.HttpDataTransferHandler.getDataAsStream(HttpDataTransferHandler.java:86)
     at weblogic.deploy.service.datatransferhandlers.DataHandlerManager$RemoteDataTransferHandler.getDataAsStream(DataHandlerManager.java:153)
     at weblogic.deploy.internal.targetserver.datamanagement.AppDataUpdate.doDownload(AppDataUpdate.java:39)
     at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
     at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:97)
     at weblogic.deploy.internal.targetserver.BasicDeployment.prepareDataUpdate(BasicDeployment.java:682)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepareDataUpdate(AbstractOperation.java:898)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.stageFilesFromAdminServer(AbstractOperation.java:264)
     at weblogic.deploy.internal.targetserver.DeploymentManager.createOperations(DeploymentManager.java:1409)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleUpdateDeploymentContext(DeploymentManager.java:162)
I have to take restart my managed server to activate the changes .Though i was able to redeploy the war file without restarting server some days back.Please help what is wrong and why i have to take restart .
Thanks

Any idea ??? I am still struggling.I have bounce back my server again to activate changes .If anyone can help it would be great .

Error while modifying Control Tables in FDM with Essbase Adapters

Hi,
While trying to edit Control Tables for Period / Category, we are getting an Error 'Unable to retrieve Target System'. We have installed FDM with the Essbase Target Adapter from ES11x-G4-D_1002.zip
Any help will be greatly appreciated
Thanks,
Prasad

Hi,
Thanks for the quick response.
We are now able to edit the Control Tables by converting the Dimensions to Global mode
However, while trying to export, we are getting the following error:
Error(1012004) Invalid member name
Thanks & Regards,
Prasad

Error while loading data from write optimized ODS to cube

Hi All,
I am loading data from a write optimized ODS to cube
I have done Generate Export Datasource
schedulled the info packge with 1 selection for full load
then it gave me following error in Transfer IDOCs & TRFC
Info IDOC 1: IDOC with errors added
Info IDOC 2: IDOC with errors added
Info IDOC 3: IDOC with errors added
Info IDOC 4: IDOC with errors added
Data packege 1 arrived in BW Processing : selected number does not agree with transferred number
Processing below is green
shows update of 4 new records to Datapackage 1.
Please provide inputs for the resolution
Thanks & Regards,
Rashmi.

please let me know, What more details you need?
If I click F1 for error details i get following message
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.
Thanks & Regards,
Rashmi.

Error while adding an Info Object in an Info Cube

Hi Experts,
I am trying to add one InfoObject to my info cube but I get following error:
"InfoObject GSMBUHR is only allowed as an attribute (not in InfoCubes)"
The Data Type of the InfoObject is TIMS.
The Reference Char. for it is 0TIME
And in other Properties Attribute only is checked.
but its not maintained as an attribute of any InfoObject as I checked in where used list for this InfoObject.
Please let me know to add it in cube.
Regards
Shubh Karan

hi,
u will not be able to add an 'attribute only' info object as characteristic in the cube
it can only be added as an attribute in another master data characteristic. so if u still want to include this info object , u need to unchecck 'attribute only' flag.
hope it helps
Regards,
Rathy

Error while trying to Lock the data in Essbase

Hi All,
I am currently facing a issue in Essbase when I am trying to lock the data it shows me the following error message.
Error Encountered is : "You do have sufficient access to perform a lock on this database". I have checked with the administrators / support team and according to them there is nothing wrong with my access. I have the write access to the database and I should be able to lock and send the data but they are unable to figure out why my access is not working or i am facing the above issue. They asked me to select update mode in the essbase options and try but even that didn't work. I am able to make the changes on the same data in Hyperion Planning. I want to lock and send the data directly to server. But I am unable to lock the data. Please expedite.
Thanks a lot for your help in advance.

From your post, it sounds like the problem is not Update mode since you mentioned you tried turning it on (I do not recommend having it on). It does sound like a security issue. Depending on the version, planning and Essbase can use different IDs for the same perosn (If I remember planning used to create two IDs one for planning and one for Essbase) The Essbase id had less access than the planning id did. I would test this by having a test Essbase ID set up that has write access and see if that ID can write directly to Essbase. If it can, I would look at filters and groups the ID is on to see if there is some sort of conflict. I have sen that message when a user had read access to part of the DB and write access to another part, but they were pulling data from the read access section only

Error while calling ejb service call from BPM service

Hi,
We are using the Oracle 11.1.1.5.0
We are calling ejb service call from BPM service to update the data to Oracle database.
We are getting the below error when we executing the ejb service call from BPM Service.
<Error> <EJB> <BEA-010026> <Exception occurred du
ring commit of transaction Name=[EJB oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliver
yBean.handleCallback(java.lang.String,java.lang.String,java.lang.String,int,bool
ean)],Xid=BEA1-45B91984D57960994897(30845116),Status=Rolled back. [Reason=javax.
transaction.xa.XAException: JDBC driver does not support XA, hence cannot be a p
articipant in two-phase commit. To force this participation, set the GlobalTrans
actionsProtocol attribute to LoggingLastResource (recommended) or EmulateTwoPhas
eCommit for the Data Source = EBSConnection],numRepliesOwedMe=0,numRepliesOwedOt
hers=0,seconds since begin=1,seconds left=60,XAServerResourceInfo[SOADataSource_
base_domain]=(ServerResourceInfo[SOADataSource_base_domain]=(state=rolledback,as
signed=soa_server1),xar=SOADataSource,re-Registered = false),XAServerResourceInf
o[ArCnTaskForms@EBSConnection@EBSConnection_base_domain]=(ServerResourceInfo[ArC
nTaskForms@EBSConnection@EBSConnection_base_domain]=(state=rolledback,assigned=s
oa_server1),xar=weblogic.jdbc.wrapper.JTSEmulateXAResourceImpl@fa5476,re-Registe
red = false),SCInfo[base_domain+soa_server1]=(state=rolledback),properties=({web
logic.jdbc.remote.EBSConnection=t3://192.168.10.114:8001, weblogic.transaction.n
ame=[EJB oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliveryBean.handleCallback(java.la
ng.String,java.lang.String,java.lang.String,int,boolean)]}),local properties=({w
eblogic.jdbc.jta.SOADataSource=[ No XAConnection is attached to this TxInfo ]}),
OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=soa
server1+192.168.10.114:8001+basedomain+t3+, XAResources={eis/tibjms/Queue, eis
/activemq/Queue, WLStore_base_domain_BPMJMSFileStore, WLStore_base_domain__WLS_s
oa_server1, eis/fioranomq/Topic, eis/jbossmq/Queue, eis/Apps/Apps, eis/websphere
mq/Queue, eis/AQ/aqSample, WLStore_base_domain_SOAJMSFileStore, eis/aqjms/Queue,
WSATGatewayRM_soa_server1_base_domain, eis/sunmq/Queue, eis/pramati/Queue, SSCo
nnectionDS_base_domain, eis/tibjms/Topic, eis/tibjmsDirect/Queue, eis/wls/Queue,
eis/tibjmsDirect/Topic, EDNDataSource_base_domain, eis/wls/Topic, eis/aqjms/Top
ic, RL3TST_base_domain, ArCnTaskForms@EBSConnection@EBSConnection_base_domain, S
OADataSource_base_domain, WLStore_base_domain_UMSJMSFileStore_auto_2},NonXAResou
rces={})],CoordinatorURL=soa_server1+192.168.10.114:8001+base_domain+t3+): weblo
gic.transaction.RollbackException: Could not prepare resource 'ArCnTaskForms@EBS
Connection@EBSConnection_base_domain
JDBC driver does not support XA, hence cannot be a participant in two-phase comm
it. To force this participation, set the GlobalTransactionsProtocol attribute to
LoggingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source
= EBSConnection
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(
TransactionImpl.java:1881)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(Se
rverTransactionImpl.java:345)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTran
sactionImpl.java:239)
at weblogic.ejb.container.internal.BaseLocalObject.postInvoke1(BaseLocal
Object.java:622)
at weblogic.ejb.container.internal.BaseLocalObject.__WL_postInvokeTxRetr
y(BaseLocalObject.java:455)
at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(Sess
ionLocalMethodInvoker.java:52)
at oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliveryBean_of8dk6_ICubeDelivery
LocalBeanImpl.handleCallback(Unknown Source)
at com.collaxa.cube.engine.dispatch.message.instance.CallbackDeliveryMes
sageHandler.handle(CallbackDeliveryMessageHandler.java:47)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
hHelper.java:140)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
hTask.java:88)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
k.java:64)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:662)
Caused by: javax.transaction.xa.XAException: JDBC driver does not support XA, he
nce cannot be a participant in two-phase commit. To force this participation, se
t the GlobalTransactionsProtocol attribute to LoggingLastResource (recommended)
or EmulateTwoPhaseCommit for the Data Source = EBSConnection
at weblogic.jdbc.wrapper.JTSXAResourceImpl.prepare(JTSXAResourceImpl.jav
a:83)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:1327)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:513)
at weblogic.transaction.internal.ServerSCInfo$1.run(ServerSCInfo.java:36
8)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
gWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
.>
<12 Oct, 2012 12:34:40 PM IST> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-00
0000> <failed to handle message
javax.transaction.xa.XAException: JDBC driver does not support XA, hence cannot
be a participant in two-phase commit. To force this participation, set the Globa
lTransactionsProtocol attribute to LoggingLastResource (recommended) or EmulateT
woPhaseCommit for the Data Source = EBSConnection
at weblogic.jdbc.wrapper.JTSXAResourceImpl.prepare(JTSXAResourceImpl.jav
a:83)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:1327)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:513)
at weblogic.transaction.internal.ServerSCInfo$1.run(ServerSCInfo.java:36
8)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
gWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
<12 Oct, 2012 12:34:40 PM IST> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-00
0000> <Failed to handle dispatch message ... exception ORABPEL-05002
Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.
message.instance.CallbackDeliveryMessage"; the reported exception is: Error comm
itting transaction:; nested exception is: javax.transaction.xa.XAException: JDBC
driver does not support XA, hence cannot be a participant in two-phase commit.
To force this participation, set the GlobalTransactionsProtocol attribute to Log
gingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = EB
SConnection
This error contained an exception thrown by the message handler.
Check the exception trace in the log (with logging level set to debug mode).
ORABPEL-05002
Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.
message.instance.CallbackDeliveryMessage"; the reported exception is: Error comm
itting transaction:; nested exception is: javax.transaction.xa.XAException: JDBC
driver does not support XA, hence cannot be a participant in two-phase commit.
To force this participation, set the GlobalTransactionsProtocol attribute to Log
gingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = EB
SConnection
This error contained an exception thrown by the message handler.
Check the exception trace in the log (with logging level set to debug mode).
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
hHelper.java:207)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
hTask.java:88)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
k.java:64)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:662)
>
Could any body help on this issue.It is little bit urgent for us to resolve.
Thanks in advance.

Thanks Sudipto Desmukh,
The link is helpful me to resolve this issue.
Thanks,
Narasimha E

Error while loading data from DS into cube

Hello All
I am getting the below error while loading data from Data source to the cube.
Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
Wht am i suppose to do?
Need ur input in this regard.
Regards
Rohit

Hi
Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
If your business is April to March make it as 'V3'
If your business is January to Decemeber make it as 'K4'..
activate your update rules delete old data and upload again....
Hope it helps
Thanks
Teja

Error while deploying Essbase studio

Hi All,
I need some help with the studio deployment error. I have created a bat script to run Maxl which will deploy essbase studio, then create some user defined measures using rules files and then calculation.
When I ran the batch script first time, it was successful. Now its giving me the following error :
BPM Connect Status: Success
Failed to deploy Essbase cube.
Caused by: Cannot begin incremental build. Essbase Error(1007151): Wrong incremental dimension build sequence
BPM maxl deployment ...failure.
Please help
Thanks

There is no issue for BSO cubes. Internally the BSO outlines are different from ASO cubes and this restriction does not appear in them. For ASO cubes, the problem is caused by deleting and readding dimensions. If you do incremental builds on dimensions, you will not have the 255 dimension issue, but the ASO outline will still grow. So the compaction utility in EsscmdQ is still valid for that.

Workspace error when drilling down on Essbase Cube

An Interactive Reporting Service error has occurred.-Failed to acquire requested service.
(2001)
We're trying to create OLAP queries in IR to deploy through workspace. When I drill down on any dimension, after deploying to workspace, I get the generic error above. Has anyone seen this error?

I have created one report using Essbase cubes in OBIEE11G and when I am archiving the same report at one local server and unarchiving it at some other server then at the other server I am facing this error.
Any replies will indeed be helpful.

Error 1002097 while redeploying the application

Please, SOS! :(
I need to redeploy my Planning 11.1.1.3 application in EPMA after having added some some new members to Version dimension in the Dimension Library. Validation of the application goes ok but the redeployment is aborted with the following error:
+Detail : An Exception occurred during Application deployment.: The Hyperion Essbase operation failed with an error code: % ERROR_CODE%.com.hyperion.planning.olap.EssbaseException: Unable to load database [%s] (1002097)+
I will highly appreciate any ideas! Thanks!

John, thank you so much for your guidance! I guess I am approaching the roots of this problem. So, I deploy the application with no problems if I leave "Create Outline" box unchecked. I cleared the application log and then launched the redeploy again with "Create Outline" box checked and for sure I got this error again, but then in EAS I have been able to see only the outline of the 1st of the 3 plan types to be created. Then I viewed the log for my application in EAS and it read the following:
+[Fri Jul 30 15:51:35 2010]Local/AppName///Error(1120006)+
+Unable to lock file [HyperionHome\products\Essbase\EssbaseServer\APP\AppName\Plan1\Plan1.esm]. Essbase will try again after a short delay.+
+[Fri Jul 30 15:51:36 2010]Local/AppName///Error(1120005)+
+Unable to lock file [HyperionHome\products\Essbase\EssbaseServer\APP\AppName\Plan1\Plan1.esm]. Please make sure other processes do not access Essbase files while Essbase server is running.+
+[Fri Jul 30 15:51:36 2010]Local/AppName///Warning(1007089)+
+Unable to open [HyperionHome\products\Essbase\EssbaseServer\APP\AppName\Plan1\Plan1.esm] for database [Plan1]+
+[Fri Jul 30 15:51:36 2010]Local/AppName///Error(1002097)+
+Unable to load database [Plan1]+
+[Fri Jul 30 15:51:36 2010]Local/AppName///Error(1002097)+
Unable to load database []
+[Fri Jul 30 15:51:36 2010]Local/AppName///Error(1002097)+
Unable to load database []
John, I would very highly appreciate your comment on the above! Thanks so much!

Error While Redeploying 11.1.2.2 EPMA essbase cube

Similar Messages

Maybe you are looking for