Error while runing ejbc

Hi,
I am getting this error while i deploy my application on Sun1 7.0 /Linux Platform. It works fine in Windows. Any help ? Please
18/Feb/2003:14:33:20] FINE ( 9447): [EJBC] rmic com.siptech.pdf.ejb.session.PDFSessionBean_RemoteHomeImpl...
[18/Feb/2003:14:33:20] FINE ( 9447): [EJBC] rmic com.siptech.pdf.ejb.session.PDFSessionBean_EJBObjectImpl...
[18/Feb/2003:14:33:20] FINE ( 9447): [EJBC] rmic com.siptech.pdf.ejb.config.session.ConfigSessionBean_RemoteHomeImpl...
[18/Feb/2003:14:33:20] FINE ( 9447): [EJBC] rmic com.siptech.pdf.ejb.config.session.ConfigSessionBean_EJBObjectImpl...
18/Feb/2003:14:33:20] FINE ( 9447): JDK Directory: /home/sunone/appserver7/jdk
[18/Feb/2003:14:33:20] INFO ( 9361): CORE3282: stdout: Remote message: Compiling RMI-IIOP code ....
[18/Feb/2003:14:33:31] SEVERE ( 9447): DPL5102: EJBC - rmic compilation failed
[18/Feb/2003:14:33:31] WARNING ( 9447): DPL5035:Error while running ejbc
com.iplanet.ias.deployment.backend.IASDeploymentException: Fatal Error from EJB Compiler -- -- rmic compilation failed: com.iplanet.ias.ejb.codegen.JavaCompilerException: RMI compiler returned an error: {0}
     at com.iplanet.ias.deployment.backend.EJBCompiler.wrapException(EJBCompiler.java:589)
     at com.iplanet.ias.deployment.backend.EJBCompiler.compile(EJBCompiler.java:186)
     at com.iplanet.ias.deployment.backend.AppDeployer.runEJBC(AppDeployer.java:215)
     at com.iplanet.ias.deployment.backend.AppDeployer.deploy(AppDeployer.java:98)
     at com.iplanet.ias.deployment.backend.AppDeployer.doRequest(AppDeployer.java:50)
     at com.iplanet.ias.admin.server.core.mbean.config.ManagedServerInstance.deployJ2EEApplicationArchiveOrDirectory(ManagedServerInstance.java:743)
     at com.iplanet.ias.admin.server.core.mbean.config.ManagedServerInstance.deployJ2EEApplication(ManagedServerInstance.java:666)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.iplanet.ias.admin.server.core.jmx.Introspector.invokeMethodOn(Introspector.java:188)
     at com.iplanet.ias.admin.server.core.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:137)
     at com.iplanet.ias.admin.server.core.jmx.ASMBeanServerImpl.invoke(ASMBeanServerImpl.java:222)
     at com.iplanet.ias.admin.servermodel.controllers.SOMRequestDispatcher.invoke(SOMRequestDispatcher.java:88)
     at com.iplanet.ias.admin.servermodel.controllers.AppServerInstanceController.doDeploy(AppServerInstanceController.java:2244)
     at com.iplanet.ias.admin.servermodel.controllers.AppServerInstanceController.deployApplication(AppServerInstanceController.java:1099)
     at com.iplanet.ias.admin.servermodel.AppServerInstance.deployApplication(AppServerInstance.java:249)
     at com.iplanet.ias.admin.server.gui.jato.DeployEARApplicationViewBean.add(DeployEARApplicationViewBean.java:111)
     at com.iplanet.ias.admin.server.gui.jato.IASViewBean.handleOkRequest(IASViewBean.java:235)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.iplanet.jato.view.command.DefaultRequestHandlingCommand.execute(DefaultRequestHandlingCommand.java:183)
     at com.iplanet.jato.view.RequestHandlingViewBase.handleRequest(RequestHandlingViewBase.java:299)
     at com.iplanet.jato.view.ViewBeanBase.dispatchInvocation(ViewBeanBase.java:811)
     at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:749)
     at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler(ViewBeanBase.java:596)
     at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:772)
     at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:446)
     at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:720)
     at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
     at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.StandardW

Similar Messages

Error while running ejbc. Fatal error from EJB Compiler ---- Error while pr

Hi!
I was deploying a test application for a session bean with sun 1 studio 5 and I started getting this message while deploying.
I had tested the bean previously and I had no problems.
I found this in the sun app server 7 release notes, but I don't understand what I'm supposed to do...
"Deployment of CMP beans fails.
The following error is thrown because there are no <query-params> entries in the container-managed persistence (CMP) bean in sun-ejb-jar.xml file:
Error while running ejbc. Fatal error from EJB Compiler ---- Error while processing CMP beans.
Solution
Even if it isn't necessary for the CMP beans, add the query-params tag for finders in the sun-ejb-jar.xml file with the empty parameters."
Here is my sun-ejb-jar.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE sun-ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Sun ONE Application Server 7.0 EJB 2.0//EN" "http://www.sun.com/software/sunone/appserver/dtds/sun-ejb-jar_2_0-0.dtd">
<sun-ejb-jar>
<enterprise-beans>
<name>GestorDoBanco_EJBModule</name>
<ejb>
<ejb-name>Cliente</ejb-name>
<jndi-name>ejb/Cliente</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/Cliente.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>ClienteAssociadoAConta</ejb-name>
<jndi-name>ejb/ClienteAssociadoAConta</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/ClienteAssociadoAConta.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>Conta</ejb-name>
<jndi-name>ejb/Conta</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/Conta.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>GestorDoBanco</ejb-name>
<jndi-name>ejb/GestorDoBanco</jndi-name>
<pass-by-reference>false</pass-by-reference>
</ejb>
<ejb>
<ejb-name>MensagemM003</ejb-name>
<jndi-name>ejb/MensagemM003</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM003.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM003Rejeitada</ejb-name>
<jndi-name>ejb/MensagemM003Rejeitada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM003Rejeitada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM012</ejb-name>
<jndi-name>ejb/MensagemM012</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM012.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM012Rejeitada</ejb-name>
<jndi-name>ejb/MensagemM012Rejeitada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM012Rejeitada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM103</ejb-name>
<jndi-name>ejb/MensagemM103</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM103.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM112</ejb-name>
<jndi-name>ejb/MensagemM112</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM112.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>Registo</ejb-name>
<jndi-name>ejb/Registo</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/Registo.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>TransaccaoConfirmada</ejb-name>
<jndi-name>ejb/TransaccaoConfirmada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/TransaccaoConfirmada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>TransaccaoFinalizada</ejb-name>
<jndi-name>ejb/TransaccaoFinalizada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/TransaccaoFinalizada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>TransaccaoIniciada</ejb-name>
<jndi-name>ejb/TransaccaoIniciada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/TransaccaoIniciada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<pm-descriptors>
<pm-descriptor>
<pm-identifier>SunONE</pm-identifier>
<pm-version>1.0</pm-version>
<pm-class-generator>com.iplanet.ias.persistence.internal.ejb.ejbc.JDOCodeGenerator</pm-class-generator>
<pm-mapping-factory>com.iplanet.ias.cmp.NullFactory</pm-mapping-factory>
</pm-descriptor>
<pm-inuse>
<pm-identifier>SunONE</pm-identifier>
<pm-version>1.0</pm-version>
</pm-inuse>
</pm-descriptors>
<cmp-resource>
<jndi-name>mysqlpmanager</jndi-name>
<default-resource-principal>
<name>bes</name>
<password>besbes</password>
</default-resource-principal>
</cmp-resource>
</enterprise-beans>
</sun-ejb-jar>
Thanks in advance for any help.
Nuno

http://docs.sun.com/source/817-2175-10/decmp.html
Please go to the above docs and look thru the examples given in it.
Example 2
This query returns all products in a specified price range. It defines two query parameters which are the lower and upper bound for the price: double low, double high. The filter compares the query parameters with the price field:
"low < price && price < high"
The finder element of the sun-ejb-jar.xml file would look like this:
<finder>
<method-name>findInRange</method-name>
<query-params>double low, double high</query-params>
<query-filter>low < price && price &lt
high</query-filter
</finder>
I hope this hepls. In your case u just have to make it null.

Error while running ejbc - Deployment time

Whilst trying to deploy my WSE through J2EE deploy tool i get the follwoing error:
Deployment failed on target Server localhost:4848 : Deployment Error -- Error while running ejbc -- Fatal Error from EJB Compiler -- jaxrpc compilation exception
I am not using ejb as far as I'm aware. I have succesfully buit my WSE using asant with no compilation errors.
Here is copy of the code
package rcews;
import java.rmi.RemoteException;
import java.util.Vector;
import java.sql.*;
import javax.sql.DataSource;
//import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.xml.rpc.server.ServletEndpointContext;
import javax.xml.rpc.server.ServiceLifecycle;
import javax.xml.rpc.ServiceException;
public class RceWSImplementation implements RceWSInterface, ServiceLifecycle {
     private DataSource ds;
     ServletEndpointContext endPtCntxt;
     public void init(Object context) throws ServiceException {
          try {
               endPtCntxt = (ServletEndpointContext) context;
               InitialContext ic = new InitialContext();
               // Specify the logical name of the database
               // Obtain the DataSource object associated with the logical name
               ds = (DataSource) ic.lookup("java:comp/env/jdbc/rcedstar");
               ic.close();
          } catch(NamingException ne) {
               ne.printStackTrace();
               throw new ServiceException("\nCannot initialise JNDI ENC\n", ne);
     public String [] getSignals() throws RemoteException {
          Statement sqlStmnt;
          ResultSet rs;
          String countQuery = "SELECT COUNT(DISTINCT signal_ref) FROM tblSignals";
          String query = "SELECT DISTINCT signal_ref FROM tblSignals ORDER BY signal_ref";
          String[] signals = null;
          int count = 0;
          try {
               // Establish connection with the database and return a Connection object
               Connection con = ds.getConnection();
               System.out.println("Connection made Successfully");
               // Create and execute SQL statement
               sqlStmnt = con.createStatement();
               rs = sqlStmnt.executeQuery(countQuery);
               if(rs.next()) {
                    int size = rs.getInt(0);
                    signals = new String[size];
               rs = sqlStmnt.executeQuery(query);
               // Move through ResultSet and pull singal reference information
               while(rs.next()) {
                    signals[count] = rs.getString("signal_ref");
                    count++;
               con.close();
          } catch (Exception e) {
               e.printStackTrace();
          return signals;
     public Vector getLampDurations(String[] signal_refs, String[] lamps, int hours) throws RemoteException {
          // Varaible Declarations
          Vector details = null;
          String signals, lamp_colours;
          PreparedStatement psqlStmt;
          ResultSet rs;
          String query = "SELECT signal_ref, light, SUM(duration), SUM(on_count) FROM tblsignals, tblsignal_events " +
                    "WHERE tblSignals.id = tblSignal_Events.id AND tblSignals.signal_ref IN (?) AND tblSignals.light IN (?) " +
                    "GROUP BY signal_ref, light" +
                    "HAVING SUM(duration) > ?";
          StringBuffer sbSignals = new StringBuffer(50);
          StringBuffer sbLamps = new StringBuffer(31);
          // Build Strings for use in Prepared SQL statements
          for(int i=0;i<signal_refs.length-1;i++) {
               sbSignals.append("'" + signal_refs[i] + "'");
               sbLamps.append("'" + lamps[i] + "'");
               if (i <= signal_refs.length - 2) {
                    sbSignals.append(",");
                    sbLamps.append(",");
          signals = new String(sbSignals);
          lamp_colours = new String(sbLamps);
          try {
               // Establish connection with the database and return a Connection object
               Connection con = ds.getConnection();
               System.out.println("Connection made Successfully");
               // Apply strings to statement
               psqlStmt = con.prepareStatement(query);
               psqlStmt.setString(1, signals);
               psqlStmt.setString(2, lamp_colours);
               psqlStmt.setInt(3, hours);
               // Obtain data from DB
               details = new Vector(4);
               String[] results = new String[4];
               rs = psqlStmt.executeQuery();
               while(rs.next()) {
                    // Copy contents of the ResultSet into a String Array for each record
                    int i = 0;
                    results[i]   = rs.getString(1);               //Signal Reference
                    results[i++] = rs.getString(2);               //Lamp (i.e colour)
                    double seconds = rs.getDouble(3);          //Duration
                    seconds = seconds / (60*60);               //Convert Seconds to Hours - would be nice to convert to Hours:mins:secs
                    results[i++] = String.valueOf(seconds);
                    results[i++] = String.valueOf(rs.getInt(4));     //Number of Times lamp has been switched on
                    // Append the string Array to a Vector
                    details.addElement(results);
               if (psqlStmt != null) { psqlStmt.close(); }
               if (con != null) { con.close(); }
          } catch (Exception e) {
               e.printStackTrace();
          return details;
     public void destroy() {
          ds = null;
}

Have since found this from the server log but I have no idea about how to solve this!
[#|2004-03-10T15:08:04.574+0000|INFO|j2ee-appserver1.4|javax.enterprise.system.tools.deployment|_ThreadID=13;|DPL5109: EJBC - START of EJBC for [RCE-WebService]|#]
Remote message: Processing beans ....
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RceWSInterface_Tie.java:32: '(' or '[' expected
super(new rcews.RCE-WebService_SerializerRegistry().getRegistry());
^
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RceWSInterface_Tie.java:32: ')' expected
super(new rcews.RCE-WebService_SerializerRegistry().getRegistry());
^
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RCE-WebService_SerializerRegistry.java:18: '{' expected
public class RCE-WebService_SerializerRegistry implements SerializerConstants {
^
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RCE-WebService_SerializerRegistry.java:33: <identifier> expected
registerSerializer(mapping,rcews.RceWSInterface_getLampDurations_RequestStruct.class, type, serializer);
^
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RCE-WebService_SerializerRegistry.java:33: '{' expected
registerSerializer(mapping,rcews.RceWSInterface_getLampDurations_RequestStruct.class, type, serializer);
^
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RCE-WebService_SerializerRegistry.java:65: illegal start of type
return registry;
^
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RCE-WebService_SerializerRegistry.java:65: <identifier> expected
return registry;
^
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RCE-WebService_SerializerRegistry.java:68: 'class' or 'interface' expected
private static void registerSerializer(TypeMapping mapping, Class javaType, QName xmlType,
^
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RCE-WebService_SerializerRegistry.java:74: 'class' or 'interface' expected
^
C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\RCE-WebService\WEB-INF\classes\rcews\RCE-WebService_SerializerRegistry.java:75: 'class' or 'interface' expected
^
10 errors

Error while running ejbc..

Hi Friends
I got the following error while trying to deploy my stateful session bean into sun ONE application server.
Deployment Error -- Error while running ejbc -- Fatal Error from EJB Compiler -- -- Failed to load deployment descriptor for: StatefulHello cause: java.io.IOException: Incorrect manifest format
I maintained the folder heirarchy same as in sun example of stateful session bean, CartBean.
Any help can greatly help me. Thank you.
Regards,
Nagaraju.

Hi Friends
I got the following error while trying to deploy my stateful session bean into sun ONE application server.
Deployment Error -- Error while running ejbc -- Fatal Error from EJB Compiler -- -- Failed to load deployment descriptor for: StatefulHello cause: java.io.IOException: Incorrect manifest format
I maintained the folder heirarchy same as in sun example of stateful session bean, CartBean.
Any help can greatly help me. Thank you.
Regards,
Nagaraju.

Getting error while runing utlu102i.sql:

Dear Experts,
I am getting following error while running utlu102i.sql script (Oracle 9.2.0.6,HP-UX 11.11)
DECLARE
ERROR at line 1:
ORA-00980: synonym translation is no longer valid
ORA-06512: at line 2925
I nned to upgrade this database, how to resolve this problem, furthermore can we goahead on upgrading without solve this ? (pre. may be obtain from another database with almost same configuraton)
Thanks & Regards
Sunil Kumar

Pl open an SR for your issue. You will need to run this script and execute its recommendations before you can upgrade. Are there any errors in the alert.log ? Are any other trace files created ?
MOS Doc 400200.1 (ORA-0600 [17069] During Upgrade of Pre-10g Database to 10g+) may also help.
HTH
Srini

Error while runing diadem asynchronous script from labview on dual core processor

Urgent need of some help / advice here!
Single core runs fine... dual core produces error: Error in <XYaxis.vbs> (line: 17, column: 1): Error while opening object. The object currently open has no subobjects. Forgotten ObjClose?
The main software built in labview used for daq and analysis generates a PDF report on completion of a test, utilising diadem. For this I use the diadem express vi in labview to generate a multi page report, whereby I use for loop to iterate an array of channels for each page. This for loop has a shift register too. After each page I run a script to adjust a few parameters like linear/log, begin/end and line thickness using the diadem connectivity tookit. See script below:
Call GraphObjOpen("2D-Axis1")
Call GraphObjOpen("2DXAxis8_1")
D2AxisXDivMode = "linear"
D2AxisXScaleType = "begin/end manual"
D2AxisXBegin = 20
D2AxisXEnd = 20000
Call GraphObjClose("2DXAxis8_1")
Call GraphObjOpen("2DYAxis8_1")
D2AxisYDivMode = "linear"
D2AxisYScaleType = "complete automatic"
D2AxisYBegin = 0
D2AxisYEnd = 0
Call GraphObjClose("2DYAxis8_1")
FOR c = 1 TO CurveNoMax
If D2CurveObj(c) = "" Then Exit For ' c
Call GraphObjOpen(D2CurveObj(c))
D2CurveLineWidth = 0.75
Call GraphObjClose(D2CurveObj(c))
NEXT ' c
Call GraphObjClose("2D-Axis1")
There is also a screenshot of the vi: (script file is generated by the Dscript vi and saved to disk. then path is passed to the diadem script vi.)
What I find is, after the first report page is complete in diadem the second page ALWAYS shows the error as shown at the top. However, on my P4 laptop with single core (no hyperthreading) its runs FINE EVERY TIME with any given number of channels/pages in the report.
My current chain of thought is that the superfast dual core is doing something in parallel therefore not waiting for the previous page to complete or finish closing its object!? however, in my for loop I use a shift register as named before, surely this kind of loop cannot be divided over more cores/parallel threads? as it has to wait for the response of the previous.!?!? Im running LV 8.6 on WinXP for this project and I didnt even think multicore processing for for loops is included in this version.
The other thing is... this script used to run fine on the dual core until I added the last part that uses a for loop to get every line of the graph to be the thinkness I need. Is this for loop the culprit? Can I stop it from executing over multiple cores/threads? I read a post saying that from diadem 8 there was multi core support. this triggered my doubt
As always any comments are most appreciated
AL
:. LV2010 SP1 ... W7 .:
Solved!
Go to Solution.

Hi Al,
I have a theory, but only you can test it. In your VI screenshot, you have the boolean input for the DIAdem Execute Script.vi set to asynchronous=TRUE. My theory says that if you change that boolean (and all others like it) to asynchrous=FALSE that the error will not occur on the multicore computer. The other thing you could try would be to consolidate all REPORT commands that pertain to one REPORT page into a single ActiveX call to DIAdem. In the screenshot below you have at least 2 separate VIs calling DIAdem, so that's at least 2 separate ActiveX calls for one REPORT sheet.
Here's what I think is going on. On a multicore computer there is the potential for different ActiveX commands from LV to DIAdem to execute on different cores, which may result in a timing problem on the DIAdem side. DIAdem 11.x and earlier runs exclusively on 1 CPU, so the incoming ActiveX commands should be sequenced correctly by DIAdem's ActiveX to-do list. Theoretically DIAdem should serialize all the incoming ActiveX commands (regardless of which CPU processed them) in the order that they arrived at the DIAdem ActiveX server(s). On the sending side, LabVIEW's dataflow execution should theoretically guarantee that all the ActiveX requests are being sent in the correct order. But it is theoretically possible that the operating system's ActiveX processing queue might not send all the ActiveX commands to DIAdem in the order that it receives them from LabVIEW-- IF YOU'VE SELECTED ASYNCHRONOUS PROCESSING.
See if these clues help,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Error while runing report

Hi all
i am getting error while running xml report as like in reports 10g where as it working fine while working with 6i
XML Parsing Error: syntax error
Location: http://apps.3k.com:8000/OA_CGI/FNDWRR.exe?temp_id=528268103
Line Number 1, Column 31:
thanks in advance goutham

Hi Goutham
You are unfortunately posting your question in the wrong forum. This is the forum for BI Applications.
You should repost your question in the Oracle Reports Forum:
Reports

Error while runing standard SRS concurrent program

Hi all,
I had written the interface for po_vendor_sites_all.The data is loaded perfectly into interface table AP_SUPPLIER_SITES_INT.
Now while running standard interface program on SRS(Supplier Sites Open Interface Import) .it is giving following error .
Spawned Process 24209
REP-1419: 'beforereport': PL/SQL program aborted.
And it is not showing any reject code or status on back end on table AP_SUPPLIER_SITES_INT. And it is printing IMPORT_REQUEST_ID as request code in the table.now how many times i will run the SRS it is showing in the table AP_SUPPLIER_SITES_INT the MPORT_REQUEST_ID is not changing .
And Can any body suggest good document for writing interface program
Thanks in advance
Goutham
Message was edited by:
goutham konduru

the same situation i am also facing everything almost same .... but just i got diffirent error in request log that is
==========================
==========================
P_WHAT_TO_IMPORT='ALL'
P_COMMIT_SIZE='1000'
P_PRINT_EXCEPTIONS='Y'
P_DEBUG_SWITCH='Y'
P_TRACE_SWITCH='Y'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
LOG :
Report: d:\oracle\prodappl\ap\11.5.0\reports\US\APXSSIMP.rdf
Logged onto server:
Username:
LOG :
Logged onto server:
Username: APPS
MSG MSG-00001: After SRWINIT
MSG MSG-00002: After Get_Company_Name
MSG MSG-00003: After Get_NLS_Strings
ERR REP-1419: 'beforereport': PL/SQL program aborted.
is anyone got solution and can anybody get me out of this situation
thanks in advance
regards
anwer

Error while runing standard SRS program

Hi all,
I had written the interface for po_vendor_sites_all.The data is loaded perfectly into interface table AP_SUPPLIER_SITES_INT.
Now while running standard interface program on SRS(Supplier Sites Open Interface Import) .it is giving following error .
Spawned Process 24209
REP-1419: 'beforereport': PL/SQL program aborted.
And it is not showing any reject code or status on back end on table AP_SUPPLIER_SITES_INT. And it is printing IMPORT_REQUEST_ID as request code in the table.now how many times i will run the SRS it is showing in the table AP_SUPPLIER_SITES_INT the MPORT_REQUEST_ID is not changing .
Thanks in advance
Goutham

the same situation i am also facing everything almost same .... but just i got diffirent error in request log that is
==========================
==========================
P_WHAT_TO_IMPORT='ALL'
P_COMMIT_SIZE='1000'
P_PRINT_EXCEPTIONS='Y'
P_DEBUG_SWITCH='Y'
P_TRACE_SWITCH='Y'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
LOG :
Report: d:\oracle\prodappl\ap\11.5.0\reports\US\APXSSIMP.rdf
Logged onto server:
Username:
LOG :
Logged onto server:
Username: APPS
MSG MSG-00001: After SRWINIT
MSG MSG-00002: After Get_Company_Name
MSG MSG-00003: After Get_NLS_Strings
ERR REP-1419: 'beforereport': PL/SQL program aborted.
is anyone got solution and can anybody get me out of this situation
thanks in advance
regards
anwer

Ora-00604 error while runing script

Hi Guys..
Let me describe the environment
My OS is windows 2008 R2 server 64-bit.. Database version is Oracle 11gR2
I recently upgraded the oracle DB from 11gr1 to 11gr2 .It upgraded successfully without any errors and the updated DB on 11gr2 is working fine..
Now one of the employee is getting below errror while executing a script which calles a plsql package.
ORA-00604: error occurred at recursive SQL level 1
ORA-00001: unique constraint (SYS.I_PLSCOPE_SIG_IDENTIFIER$) violated
I googled around and found that its related to plscope_settings parameter..
select name,value from v$parameter where name = 'plscope_settings';
the output was IDENTIFIERS:NONE
Further investigations revealed that my DB is running with the (default) init-parameter “plscope_settings=IDENTIFIERS:NONE”, while my SQL-Developer (v3.0) started every session with the default-setting “plscope_settings=IDENTIFIERS:ALL” (see menu EXTRAS>PREFERENCES>DATABASE>PL/SQL-COMPILER).
so i changed the settings to NONE in Sql Developer too..then recompiled the package but the error is still there when i execute the same package..
Its high time..i need to resolve it over the weekend..so can u plz share ur valuable comments..
Let me if u want any info from my end so that u get more clearer about the prob...

sai121 wrote:
Hi Guys..
Let me describe the environment
My OS is windows 2008 R2 server 64-bit.. Database version is Oracle 11gR2
I recently upgraded the oracle DB from 11gr1 to 11gr2 .It upgraded successfully without any errors and the updated DB on 11gr2 is working fine..
Now one of the employee is getting below errror while executing a script which calles a plsql package.
ORA-00604: error occurred at recursive SQL level 1
ORA-00001: unique constraint (SYS.I_PLSCOPE_SIG_IDENTIFIER$) violated
I googled around and found that its related to plscope_settings parameter..
select name,value from v$parameter where name = 'plscope_settings';
the output was IDENTIFIERS:NONE
Further investigations revealed that my DB is running with the (default) init-parameter “plscope_settings=IDENTIFIERS:NONE”, while my SQL-Developer (v3.0) started every session with the default-setting “plscope_settings=IDENTIFIERS:ALL” (see menu EXTRAS>PREFERENCES>DATABASE>PL/SQL-COMPILER).
so i changed the settings to NONE in Sql Developer too..then recompiled the package but the error is still there when i execute the same package..
Its high time..i need to resolve it over the weekend..so can u plz share ur valuable comments..
Let me if u want any info from my end so that u get more clearer about the prob...
bcm@bcm-laptop:~$ oerr ora 1
00001, 00000, "unique constraint (%s.%s) violated"
// *Cause: An UPDATE or INSERT statement attempted to insert a duplicate key.
// For Trusted Oracle configured in DBMS MAC mode, you may see
// this message if a duplicate entry exists at a different level.
// *Action: Either remove the unique restriction or do not insert the key.

Error while runing a web application

hi
I go this error whie trying toopen a web client over the application server
Sun Java System Application Server 8 ic hecked the jsp and found no errors on the jsp
could some one please help me solve this and what is the path setting for JDK that is to be followed while using Sun Java System Application Server 8
thank you
this the error that i got
org.apache.jasper.JasperException: Unable to compile class for JSP
No Java compiler was found to compile the generated source for the JSP.
This can usually be solved by copying manually $JAVA_HOME/lib/tools.jar from the JDK
to the common/lib directory of the Tomcat server, followed by a Tomcat restart.
If using an alternate Java compiler, please check its installation and access path.
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:132)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:356)
     org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:420)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:463)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:444)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:557)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:305)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:306)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:253)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
     sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:324)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:289)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:311)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:205)
note The full stack trace of the root cause is available in the Sun-Java-System/Application-Server-PE-8.0 logs.
I could not find the log file too

I think you have an error in some of your JSP files. Have you seen the server's log?
Best regards.
Antonio Varela.

Error while runing bdc program

hi,
i written one bdc program there are no syntax errors and in flat file also no error records but when uploading data it showing pop up that do you want to save data with 2 push buttons yes or no. i suppose to be it is front end problem how to avoid that.
p.surendar reddy

Hi,
You have miss a step while recording.. What i mean is you have created
bdc for changing some document. you recorded the fields to be changed
but didn't save before terminating recording.
re-create your recording... and before and click save icon as the last step#
in your recording..
Hope this solves your problem..
Enjoy SAP,
Pankaj Singh.

Error while using "ejbc" command....

Hi,
I got the following errors when I use the ejbc Command in weblogic6.1 using ant tool to run a Bean Managed Entity Beans.I've also attached the two descriptor files(ejb-jar.xml and weblogic-ejb-jar.xml) and make file build.xml.
ejbc:
[java]
[java] ERROR: Error from ejbc: In EJB AccountBean, the primary key class must implement the method boolean equals(Object other).
[java] ERROR: Error from ejbc: In EJB AccountBean, the primary key class must implement the method public int hashCode().
[java] ERROR: ejbc found errors
[java] Java Result: 1
ejb-jar.xml
<?xml version="1.0"?>
<!DOCTYPE ejb-jar PUBLIC
'-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN'
'http://java.sun.com/dtd/ejb-jar_2_0.dtd'>
<ejb-jar>
<enterprise-beans>
<entity>
<ejb-name>AccountBean</ejb-name>
<home>com.testejb.AccountHome</home>
<remote>com.testejb.Account</remote>
<ejb-class>com.testejb.AccountBean</ejb-class>
<persistence-type>Bean</persistence-type>
<prim-key-class>com.testejb.AccountPK</prim-key-class>
<reentrant>False</reentrant>
</entity>
</enterprise-beans>
<assembly-descriptor>
<container-transaction>
<method>
<ejb-name>AccountBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
weblogic-ejb-jar.xml
<?xml version="1.0"?>
<!DOCTYPE weblogic-ejb-jar PUBLIC
'-//BEA Systems, Inc.//DTD WebLogic 6.0.0 EJB//EN'
'http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd'>
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>AccountBean</ejb-name>
<jndi-name>AccountHome</jndi-name>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>
build.xml
project name="beanManaged" default="all" basedir=".">

<property environment="env"/>
<property file="../../../../examples.properties"/>
<property name="source" value="."/>
<property name="build" value="${source}/build"/>
<property name="dist" value="${source}/dist"/>
<target name="all" depends="clean, init, compile_ejb, jar_ejb, ejbc "/>
<target name="init">

<tstamp/>

<mkdir dir="${build}"/>
<mkdir dir="${build}/META-INF"/>
<mkdir dir="${dist}"/>
<copy todir="${build}/META-INF">
<fileset dir="${source}">
<include name="*.xml"/>
<exclude name="build.xml"/>
</fileset>
</copy>
</target>

<target name="compile_ejb">
<javac srcdir="${source}" destdir="${build}"
includes="Account.java, AccountHome.java, AccountException.java, AccountPK.java, AccountBean.java"/>
</target>

<target name="jar_ejb" depends="compile_ejb">
<jar jarfile="${dist}/src.jar"
basedir="${build}">
</jar>
</target>

<target name="ejbc" depends="jar_ejb">
<java classname="weblogic.ejbc" fork="yes">
<sysproperty key="weblogic.home" value="${WL_HOME}"/>
<arg line="-compiler javac ${dist}/src.jar d:/bea/wlserver6.1/config/mydomain/applications/AbeanManaged.jar"/>
<classpath>
<pathelement path="${WL_HOME}/lib/weblogic_sp.jar;${WL_HOME}/lib/weblogic.jar"/>
</classpath>
</java>
</target>
<target name="clean">
<delete dir="${build}"/>
<delete dir="${dist}"/>
</target>
</project>
Expecting your reply
Thanks & Regards
Venkatesh

Gee, this is just a guess but how about defining methods equals() and hashCode() in your pk class?
ps
The color of George Washington's white horse was white.

Error while runing form

Hi All,
Could someone help me in solving my problem while running my form
I have installed Forms [32 Bit] Version 10.1.2.0.2 (Production) and Installed JInitiator 1.3.1.22.
I have configured FORMS_PATH at default.env file. I am using Databse 10.2 and started my OC4j instance
When I execute the form it display error in my Internet Explorer
Internet Explorer has encountered a problem and needs to close.
rgds
saaz

http://www.experts-exchange.com/Software/Internet_Email/Web_Browsers/Internet_Explorer/Q_22467309.html
Especially please read this:
http://technology.amis.nl/blog/?p=1445
There might be several reasons the crash occurs.
You may have unwanted add-ons like Microsoft Live Toolbar running on your machine. Disable the add-ons one by one, restart IE and check if the error is resolved
IE 7 might not be supported for your JRE environment. Uninstall IE 7 and continue using IE 6 until the JRE version is supported. Further more to prevent that IE 7 will be pushed again on your computer install the blocker toolkit of Microsoft. The blocker toolkit that may be installed by administrators can prevent the automatic delivery of IE 7 to the users desktops. Although the application of the blocker software prevents the automatic download of IE 7, it does not stop users manually downloading and installing it themselves.
Oracle advises:
"If your Microsoft Automatic Updates facility is set to Automatically download recommended updates for my computer and install them, we highly recommended you install the blocker toolkit. If your Microsoft Automatic Updates facility is set to Download updates for me, but let me choose when to install them, it may still be useful to install the blocker toolkit as an extra safety measure.
Companies that have their own Windows patch update server (e.g. Windows Server Update Services (WSUS) or SMS 2003) do not need this blocker. They should just manage the IE 7 update so that it is not deployed until certification of IE 7 has been announced by Oracle. "
You can download the install blocker at http://www.microsoft.com/downloads/details.aspx?FamilyId=4516A6F7-5D44-482B-9DBD-869B4A90159C&displaylang=en

Error while runing webdynpro application on Blackbery simulater

Hi All
i have developed a web dynpro application that simply renders textviews and buttons in a flowlayout.
its runing fine on IE .but when i am trying to access this application on blackberry similator its showing this error.
WML not FORMED or _VALID Line 1:
Column 532:
Attribute name "title" associated with an element type "anchor" must be followed by the '=' character.
can any one help me on this problem , how can i dentified where is the problem.
points will be awarded.
Thanks
Rashmi

The Problem has been solved by my self.

Error while runing ejbc

Similar Messages

Maybe you are looking for