Error while sending message to SOAP receiver

Hi ALL,
when i send message from the Service Regestry my interface is working,but when i coppy the same WSDL file in the Service registry in desktop and send message using AltovaSPY  i am getting this error.
com.sap.aii.af.service.cpa.CPAException: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve inbound binding for the given P/S/A values
need u'r help.
thanks
Souz..

Hi Dominic,
  Looks like Cache is not got updated.
Go to SXI_CACHE and check whether it is green or not.If not refresh it.
Also refresh CPACache with PIDIRUSER or any user with similar roles.
to refresh use this URL : http://host:port/CPACache/refresh?mode=full
After this inactivate and activate ur CC.
If this wont work for u...then restart J2EE server.
Regds,
Pinangshuk.

Similar Messages

  • SOAP Receiver- Error While Sending Message: 500 Internal Server Error

    Hello,
    Our scenario: IDoc to SOAP
    I have added a third party system in the SLD and have used the same in my ID configuration.
    An idoc will be triggered from R/3, which will received in PI, PI will transform the IDoc into SOAP message for the third party system.
    I have tested the scenario in ID from Interface Determination and its successful.
    But when i try to try to test it from RWB, using Test Message in Adapter Engine, I get an error,
    "Error while sending message:500 Internal server error"
    If we test it using a testing software like SOAP UI, it works fine but from PI we get the error mentioned above.
    Regards,
    Abhishek

    Hello,
    Since the IDOC adapter resides on the ABAP stack, you can use this URL instead (it will be sent to the integration engine as Venkata suggested)
    http://host:port/sap/xi/engine?type=entry
    Also check your firewall settings from PI to the third-party system.
    Hope this helps,
    Mark
    Edited by: Mark Dihiansan on Feb 7, 2012 11:48 AM

  • Error while sending message.

    Hi,Could anyone explain the below error message and tell me how can we solve this?
    Error while sending message: com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=NDE_CLNT200;TS=;AN=Z_FI_OUTBOUND_SAP_TO_SIP;ANS=urn:sap-com:document:sap:rfc:functions;
    Regards,
    sai.

    Hello,
    I have the same problem here. I already did many times redefine the wohle szenario and also tried out many different adapters. But any time I get the same error message. I checked the agreements and determinations very carefully. The Test in IDR said this:
    Senderagreement
    <not found>
    <Trace level="1" type="B">SENDER AGREEMENT SIMULATION</Trace> <Trace level="1" type="T">Simulating Adapter Engine...</Trace> <Trace level="1" type="T">Simply trying to loolup for the most specific Sender Agreement object</Trace> <Trace level="1" type="T">no objects found</Trace> <Trace level="1" type="T">Note that real results may differ</Trace>
    Receiverdetermination
    | BusSys_A | MI_HTTPtoJDBC_HTTP
    <Trace level="1" type="B">CL_RD_PLSRV-ENTER_PLSRV</Trace>... (4 Zeilen)
    Interface-determination
    | BusSys_A | MI_HTTPtoJDBC_HTTP | | BusSys_B
    <Trace level="1" type="B">CL_ID_PLSRV-ENTER_PLSRV</Trace>... (4 Zeilen)
    Interface-Mapping
    <not found>
    Runtimeerror
    com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_HTTPtoJDBC_Input_: RuntimeException in Message-Mapping transformatio~
    <Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>... (152 Zeilen)
    I hope you can help me getting it working. thank you

  • " Error while sending message: 500 Internal Server Error" RNIF Adapter

    Hi,
    I have configured B2B integration as   Sender : RNIF adapter &  Receiver: XI Adapter.
    I am  able to test the configuration successfully in ESR and ID. But, whille testing with RWB using same test data, i am getting the following error:
    Error while sending message: 500 Internal Server Errot.
         Could you anybody help me, what could be the reason? Even i am not getting any error messages in SXMB_MONI.
    Thanks
    Laxman

    Hope this helps..
    -Is the 500 internal SErver Error in RWB is only for this issue and the message is successfully processed in SXMB_MONI?
       Could be the PI Service User :PIAFUSER(Adapter framework user) login crendential issue or run out time error.
    Try taking the payload from sxmb_moni and enter  it in RWB > Adater engine> Test Message Tab > give proper sender interface information , enter payload and try sending message.   check what is behaviour

  • Imp: Error while sending message: 500 Internal Server Error

    Hi all
    while testing my scenarios- by sending the message through component monitoring in RWB I get the following error in Integration Server
    <b>"Error while sending message: 500 Internal Server Error "</b>
    It seems that integration server is not picking up the messages.
    Can anyone help me on this?
    thanks
    Abhishek

    Hi Abhishek,
      Check whether the integration url is pointing to correct one something like http://host url:http port/sap/xi/engine?type=entry.
    Please do refer the below blog:
    /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    Regards,
    Prasanthi.

  • Error while calling webservice with SOAP Receiver

    Hi Experts,
    When we run the report on the ECC 6.0 server we call the web service which is configured as a receiver SOAP Adapter, we are getting the following error:
       XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Not enough message parts were received for the operation
    Can somebody throw a light on this error and how to overcome it.
    Thanking You
    With Best Regards
    Suk4023

    >Can somebody throw a light on this error and how to overcome it.
    Import WSDL and Use soapui or xmlspy and try to send the request and see the response. Make sure your WSDL URL is valid one too. After testing update more informaton on this.

  • Error while posting messages to SOAP sender adapter SP 13

    Hi Friends,
                    I have configured a SOAP sender adapter in XI 3.0 and is using the URL
    http://host:port/XISOAPAdapter/MessageServlet?channel=:BS_WEBSERVICE:CC_WEBSERVICE_SOAP to post the messages. When I open the URL in the browser I am getting the error.
    Message Servlet is in Status ERROR
    Status information:
    Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/aii/30_VAL_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#5 $) bound to /MessageServlet
    Classname ModuleProcessor: null
    Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
    Lookupname for remoteModuleProcessorLookupName: null
    ModuleProcessorClass not instantiated
    ModuleProcessorLocal not instantiated
    ModuleProcessorRemote not instantiated
    But when I test the URL http://host:port/XISOAPAdapter/HelperServlet?action=FindChannel&channel=:BS_WEBSERVICE:CC_WEBSERVICE_SOAP to check the communication channel I am getting the right response as below.
    <?xml version="1.0" ?>
    <http://host:port/XISOAPAdapter/HelperServlet?action=FindChannel&channel=:BS_EBTR_WEBSERVICE:CC_EBTR_WEBSERVICE_SOAP> <s:ChannelInfo xmlns:s="http://sap.com/xi/WebService/xi30">
      <channelID>e7ac884596ea3d088cbfd8b434f942f2</channelID>
      <name>CC_WEBSERVICE_SOAP</name>
      <type xmlns:st="http://sap.com/xi/XI/System">st:SOAP</type>
      <direction>INBOUND</direction>
      <party />
      <service>BS_WEBSERVICE</service>
      </s:ChannelInfo
    I used the http capture to debug, In the 1st case though I am getting "Message Servlet in status error" I am seeing a 200 OK code in the http capture tool. When the message is posted from .net client proxy we are getting a 500 internal server error.
    Am not sure what causes the error ? I saw two notes in SDN related to SOAP - J2EE SP13. We are in SP13. Is this the issue ? Wanted to know your opinion before applying the notes.
    Thanks & Regards,
    Mathew

    ABAP & Java stack was on different SP levels.

  • Service Desk: error while sending message to SAP

    Hello Gurus,
    I have configured Service Desk in Solution Manager. When i create a message in one of my Satellite Systems the message appears in Solman but when i try ro send the message to SAP i get the following error.
    "You do not have authorization to Send or Compare a notification"
    The user has SAP_ALL and NEW and the same has been maintained in AISUSER table. After i get the error i executed SU53 but there are no missing authorization.
    Can someone please tell me what the problem could be?
    Regards
    Anil Verma B

    Hi,
    Apart from the SAPOSS, SAP-OSS, SAP-OSS-LIST-01  rfcs, pls ensure the basic authorizations for solman has been verified and given.
    SAP_SUPPDESK_ADMIN
    SAP_SUPPDESK_CREATE
    SAP_SV_FDB_NOTIF_BC_ADMIN
    Please also verify if you had the BADI settings done correctly as per note
    1140822    SAP customer number for installation number &1 unkn
    Hope this helps.
    Cheers
    Sh

  • Error while sending message from BI to XI

    Hello Gurus,
    I am trying to push data from BI to XI, following procedure form guide "Push data from BI to XI - 1.00 May 2004).
    I have created the table to be exported via Open Hub Destination, I have created an entry within SLG0, I have defined ABAP class (all according to steps in guide), and finally I have created process chain that:
    1. starts the process
    2. executes APD (data to be exported preparation)
    3. activates data in exporting structure
    4, sends the message to XI that data is ready to be fetched
    I have a problem with last entry. It fails, and outputs following message:
    Job ZPUSH has been started because of event RSPROCESS
    4I8WSSPB6BEBSWCP5L9DVIA6L . This job is not, however, known in the
    active version of the process chain.
    The last element of my chain is defined as "other process type". This element is expected to send a message to XI.
    In the procedure described in a quide I see no reference to an ABAP class (that  I have defined in a certain step)
    Please advice

    Tere was wrong (default) abap class assigment in other types entry definition

  • Error while sending a message  501 not implemented

    Hi all,
    running some tests checking some Xi interfaces we have the following problem :
    going to Runtime Workbench --> Component Monitoring --> Adapter Engine e clicking on the Tab "Test Message" we insert Service, Interface, Namespace, Quality of Service, user and password
    On "send message to" we insert the string:
    http://apl06gjbx:8031/XISOAPAdapter/MessageServlet?channel=:BSY_CDFS_CRISP_DX8:CC_SOAP_IF_KE_02_In
    Executing "Send Message", we get the following error :
    "error while sending message : 501 not implemented"
    Any suggestion ?
    thanks in advance

    Hi all,
    using a 53100 port and xml code in payload it seems better but we get the following error:
    com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
    Display Stack Trace
    com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:328)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
         at jsp_FC_Secure1185456171353._jspService(jsp_FC_Secure1185456171353.java:24)
         at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:215)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: java.lang.NullPointerException
         at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doProcessAfterInput(CmDynPage.java:60)
         at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:101)
         at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
         at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
         at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
         ... 20 more

  • HTTP error while sending SOAP request using wsdl file

    We created SOAP request using the wsdl file ; while sending SOAP request from Altova XMLSpy, we are getting the below error.
    HTTP error: could not post file
    Can you please explain how to resolve this issue
    Regards,
    Sanghamitra

    there is very little information to help you here.
    Can you confirm if this is a SOAP sender scenario or SOAP receiver scenario?
    Also do go to thru these links to help you out;
    Troubleshooting
    Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 ***
    RFC -> SOAP
    RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
    RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
    SOAP <-> XI <-> RFC/BAPI
    Walkthrough - SOAP  XI  RFC/BAPI

  • Error trying to send email -- IOException while sending message

    Email is successful when:
    I run my application through JDeveloper
    or
    when I use a classpath, but if I try to execute app via a jar file, i get the following error message: IOException while sending message.
    The jar file does include mail.jar and activation.jar.
    Below is my email code:
    import java.util.*;
    import javax.mail.*;
    import javax.mail.internet.*;
    public class JMAR_Mail {
    private String sendTo;
    private String sentFrom;
    private String host;
    private String messageSubject;
    private String messageText;
    private MimeMessage msg;
    public JMAR_Mail() {}
    public JMAR_Mail(String sendTo, String sentFrom, String _host) {
    sendTo = _sendTo;
    sentFrom = _sentFrom;
    host = _host;
    public void setEmailSubject(String _messageSubject) {
    messageSubject = _messageSubject;
    } // end setEmailSubject
    public void setEmailText(String _text) {
    messageText = _text;
    public void sendEmail() throws MessagingException {   
    // create some properties and get the default Session
    Properties props = System.getProperties();
    props.put("mail.smtp.host", host);
    Session session = Session.getInstance(props, null);
    InternetAddress addr = new InternetAddress();
    // parses comma separted list of email addresses
    InternetAddress[] address = addr.parse(sendTo);
    msg = new MimeMessage(session);
    msg.setFrom(new InternetAddress(sentFrom));
    msg.setSubject(messageSubject);
    msg.setText(messageText);
    msg.setRecipients(Message.RecipientType.TO, address);
    msg.setSentDate(new Date());
    Transport.send(msg);
    } // end sendEmail
    }

    You don't want to include those jar files in your jar file,
    you want to reference them:
    http://forum.java.sun.com/thread.jspa?forumID=43&threadID=762763

  • I cant use imessages, it tells me that it had an error while sending a message

    i cant use imessages, it tells me that it had an error while sending a message, but it can do all the other things.

    I have a third generation iPod touch, newest software version, wifi is on, address in contacts, phone number in contacts. I can start to send a message, it gets close to the end and then fails to deliver. I have read the trouble shooting guide and followed all directions. I can send from my iPad just fine, but not the iPod.  Any ideals?

  • Out of memory error occurred while processing message at RFC receiver

    Hi Experts
    Hi Experts
    i have a scenario file to RFC BPM bridge Sync/Async,
    i´m getting this error when this BPM is trying to read  the RFC
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: Out of memory error occurred while processing message at RFC receiver
    please somebody can you help me

    Hi,
    No need to restart the server. In PI there is a parameter 'java Heap' indicating the size of data processed adapters. Check if it is necessary to increase the size of this parameter.
    Check the note: 1173398
    I hope to help you
    Regards,

  • INVALID_QUEUE_NAME :  Error while scheduling message using qRFC

    Hello SDNers
    We are currently performing our PI 7.1 upgrade and one of our scenario uses a Sender SOAP of the type EOIO. We tried executing this scenario in PI 7.1 XID environment and in it worked fine without any errors but in our PI 7.1 QA environment it is giving the following errors
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Message Split According to Receiver List
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">SCHEDULE_ERROR</SAP:Code>
      <SAP:P1>XBQOC___*</SAP:P1>
      <SAP:P2>INVALID_QUEUE_NAME</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>Error while scheduling message using qRFC (queue name = XBQOC___*, exception = INVALID_QUEUE_NAME)</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Can you please exaplian what could be the issue we are facing.
    Thanks.
    Kiran
    Edited by: Kiran Sakhardande on Oct 22, 2008 4:08 PM

    HI Kiran,
    Have gone throgh the following link?
    INVALID_QUEUE_NAME
    Regards
    Sridhar Goli

Maybe you are looking for