Error While Trying to update RPM Second time in the same session as Create

I am getting this error when I try to update item as soon as I create a new one.
Error is
Source type \CLASS=/RPM/CL_PORTFOLIO_O is not compatible, for the purposes of assignment, with target type \CLASS=/RPM/CL_BUCKET_O
CX_SY_MOVE_CAST_ERROR /RPM/CL_SMODEL_API============CP /RPM/CL_SMODEL_API============CM00E 62
When I close the browser and come back I am able to update the item properly. I am not sure if there is any kind of locking happening as soon as we create an item.
In the standard SAP functionality, he is redirecting to item overview.
Appreciate any help in this regard.
Thanks,
Kumar

Hi Kumar,
First check if the components cprxrpm and cprxrpm_ui are both on the same level of SP.
Also make sure the J2EE restart had beem done after the SP upgrade.
Regards,
Prashanth

Similar Messages

Error while uploading multipile files to C folders in the same session

Hi,
I am uploading a file to my C folders. For the very first time I was able to upload my file to C folders
But from thenext time I am getting the following error
Object <i>4B54244D53F400EAE10080000A140013</i> of type <i>Folder</i> no longer exists.
If I refresh my Webdynpro application I was again able to upload the documents
Could any one please help me what might be the issue.
Regards

Thank You .....For the Ans.
But I guess It is the Prob with Auth

Getting the error "Error while trying to update record" when I try to force complete a plan in DAC

Hello Everyone ,
I am using OBIA 7.9.3.7 . One of my execution plan has finished executing all the tasks but it is still in running mode . When I try to force complete it , it gives the error " Error while trying to update record" . Upon checking the log file , I found the below errors :
MESSAGE:::ORA-04092: cannot COMMIT in a trigger
ORA-06512: at "DAC_CUSTSCM.ETL_FAIL_NOTOFICATION", line 9
ORA-04088: error during execution of trigger 'DAC_CUSTSCM.ETL_FAIL_NOTOFICATION'
EXCEPTION CLASS::: java.sql.SQLSyntaxErrorException
The Plan is in running state for past couple of days . I tried to re-start the DAC services , but again it gave the same error . Kindly suggest .
Regards
Satyendra

Just to correct , the version of obia is 7.9.6.3

Error while trying to update to ios 5

I keep getting an error while trying to update to iOS 5. I update iTunes this morning to the lastest version so I know that isn't the problem. I have tried restarting both my computer and my phone, but contine getting "The iPhone could not be restore. An unknow error occurred (3194)." PLease help! Thanks in advance

I am also getting the error 43 when the update tries to back the phone up. Im using the latest version of itunes. This is on an iphone4, I am in the UK.
I tried deleting all of the historical backups to see if a fresh backup folder helps. It did not.
Ive tried running iTunes in 'administrator' mode on my Windows 7 machine. This made no difference.
Ive tried putting the phone in airplane mode. No difference.
I tried getting it into restore mode just to see if it worked on a iphone4. However it did not seem to want to do it.
Im not not too sure about proceeding with this update as I done want to loose any of the apps I have. (or 3 my 3 stars in every angry birds level on all 3 versions of the game!!)
Please someone, HELP !! !!

Write back error while trying to update the data

This is my writeback.xml file*
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="UpdateBA">
<XML>
<writeBack connectionPool="Oracle Data Warehouse Connection Pool">
<insert> </insert>
<update> UPDATE XXAUD_W_BUD_QTA_F SET BUDGET_AMT=@{c19},attribute2='@{c15}'
where INTEGRATION_ID='@{c6}'</update>
</writeBack>
</XML>
</WebMessage>
<WebMessage name="UpdateQA">
<XML>
<writeBack connectionPool="Oracle Data Warehouse Connection Pool">
<insert> </insert>
<update> UPDATE XXAUD_W_BUD_QTA_F SET QUOTA_AMT=@{c21},ATTRIBUTE3='@{c18}'
where INTEGRATION_ID='@{c6}'</update>
</writeBack>
</XML>
</WebMessage>
<WebMessage name="UpdateFA">
<XML>
<writeBack connectionPool="Oracle Data Warehouse Connection Pool">
<insert> </insert>
<update> UPDATE XXAUD_W_FORECAST_F SET FORECAST_AMT=@{c19},attribute1='@{c22}'
where INTEGRATION_ID='@{c15}'</update>
</writeBack>
</XML>
</WebMessage>
<WebMessage name="UpdatePO">
<XML>
<writeBack connectionPool="Oracle Data Warehouse Connection Pool">
<insert> </insert>
<update> UPDATE XXAUD_W_SALESLOGIN_DTL SET ACTIVE_FLG='@{c2}' WHERE RESOURCE_ID=@{c1}</update>
</writeBack>
</XML>
</WebMessage>
<WebMessage name="UpdateRET">
<XML>
<writeBack connectionPool="Oracle Data Warehouse Connection Pool">
<insert> </insert>
<update> UPDATE XXAUD_W_RET_TARGET_F SET JUL_RET_TAR=@{c3},AUG_RET_TAR=@{c4},SEP_RET_TAR=@{c5},
OCT_RET_TAR=@{c6},NOV_RET_TAR=@{c7},DEC_RET_TAR=@{c8},JAN_RET_TAR=@{c9},FEB_RET_TAR=@{c10},
MAR_RET_TAR=@{c11},APR_RET_TAR=@{c12},MAY_RET_TAR=@{c13},JUN_RET_TAR=@{c14}
WHERE INTEGRATION_ID='@{c0}'</update>
</writeBack>
</XML>
its getting updated at some time but when i tried to update after some time i am getting error
can you please tell me the reason for this???
*An error occurred while writing to the server. Please check to make sure you have entered appropriate values. If the problem persists, contact your system administrator.
Sax parser returned an exception. Message: Expected entity name for reference, Entity publicId: , Entity systemId: , Line number: 1, Column number: 344*
Error Details
Error Codes: UH6MBRBC:E6MUPJPH
Xml parsed: <writeBack template="UpdateQA"><record action="update"><value columnID="c6">ICS_US~1721~15041~1~2009~135</value><value columnID="c7">2009</value><value columnID="c13">2009 / 01</value><value columnID="c17">Specialty</value><value columnID="c15">Carroll, Patrick</value><value columnID="c16">SALES_PERSON</value><value columnID="c12">1st Auto & Casualty Insurance</value><value columnID="c11">ICS_US</value><value columnID="c21">3334</value><value columnID="c18">as</value></record><record action="update"><value columnID="c6">ICS_CAN~1438~15454~1~2009~135</value><value columnID="c7">2009</value><value columnID="c13">2009 / 01</value><value columnID="c17">Specialty</value><value columnID="c15">Barrette, Denis (Denis)</value><value columnID="c16">SALES_PERSON</value><value columnID="c12">AXA Assurances</value><value columnID="c11">ICS_CAN</value><value columnID="c21">147</value><value columnID="c18">fg</value></record></writeBack>

Hi,
i changed my xml by replacing update stmt in <insert> but still facing same problem.
One thing the table with columns customer name, amount,comments.
the customer name have some spl character like *"&"* (john&Franklin).I think this might be a problem(special char &),due to this getting error????
Sax parser returned an exception.
Message: Expected entity name for reference, Entity publicId: , Entity systemId
SAX parsor is not able to read this character???
Help me out!!!
Thanks,
Varanasi Saichand

I receive this error while trying to update to iTunes 10.6.3

I receive this error while trying to complete an Itunes 10.6.3 update.
"The update could not be verified. It may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs."
I have tried installing again many times with the same result. If someone and tell me how to proceed, this would be great!! Thanks, Kim

I'd try updating using a .dmg installer downloaded from the Apple Website:
http://www.apple.com/itunes/download/

TS3694 just got a 3004 error while trying to update iphone version, what should I do

juat got 3004 while trying to update iphone version, what should I do?

error 3014 is this
Error 3014
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below inUnable to contact the iOS software update server gs.apple.com.
If you have jailbroken you will get no support here. It is against the terms of use of this forum to discuss jailbreaking

Ipod touch 2nd generation getting unknown error -1 message while trying to update to 4.2 disabled the security still get message any suggestions?

While trying to update my ipod touch 2nd generation to ios 4.2 i get the messge this ipod could not be restored. Unknown error occured (-1). Tried updating with security software disabled, restarting both computer and ipod still same results any suggestions?

Since Apple says:
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
It sounds like you have a hardware problem ((device may need service). Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Error while trying to save a crystal report via the Add-ins

Hi All,
I'm getting an error while trying to save the crystal report after I have opened it from the SAP.
When I'm trying to save the report via the Add-ins I'm getting the next error :
Unknown error accured failed to get the internal key of the current user.
Thanks for your help,
Eyal

Hi Eyal,
Even though you posted your 1st message couple of month ago, I would still say welcome you to post on the forum.
What is your B1 version and PL?
Thanks,
Gordon

Fatal Error while trying to update device software

I have recently purchased my first blackberry (the storm). I have added the desktop manager to my computer and when I connect my device, it automatically checks for updates. It shows that I have have software updates to download, it gives me a summary of applications to update. Then it asks to click finish. When I do that, it goes to an Error message: Fatal error has occured while updating your devices software. Please try again. I have tried many times, and I even removed the desktop manager and reloaded it, with the same results. Any ideas?

What version of the desktop manager are you using? Do you have enough free memory? and what version are you using now, options/status
If someone helped you give them kudos. Research all info!

Error while trying to update my Ipad for new iOS5 :(

On trying to update to the lastest iOs5 version for my Ipad, after syncing everything correctly, a last pop-up shows " Error occured while backing up Ipad (-37) Continue will result in lost of all contents of Ipad"...what do i need to do or fix!? Help please!!

i have tried this a couple of times already and it also would show " error... (-5000) , but it says the same thing only difference is the error number. Please help!!!

Stale data error while trying to update row.

Hi,
I have a search page, from where i would like to select a particular record and update some of its attributes. But when i try to commit the transaction, i get the error below:
Unable to perform transaction on the record. \nCause: The record contains stale data. The record has been modified by another user. \nAction: Cancel the transaction and re-query the record to get the new data.
My Results table, based on VO1(based on EO), has an image item which submits the page and opens another page with the details of the current record, and provides the user with an option to update one of the attributes. The second page, where the user updates the attributes is based on another VO (say VO2, which again is based on the same EO as VO1).
Behind the Apply button, i call a method in the AM which simply commits the transaction and then re-directs to the original search page and displays the confirmation message.
Pseudo Code:
In the controller for VO1 (search page).
if <update> then
params = config_id ;
am.invokeMethod("initSketchDetails,params) ;
In AM
public void initSketchDetails(String config_id)
vo = getVO2 ;
vo.initQuery ;
In VO2Impl
public void initQuery(String config_id) {
<convert string to jbo.domain.number>
setWhereClause("config_id = :1);
setWhereClauseParams(null) ;
SetWhereClauseParam(0,config_id);
executeQuery();
In the PFR of Controller for the Update Page
if ("apply" != null)
am = pageCOntext.getAM ;
am.invokeMethod("apply") ;
pageCOntext.forwardImmediately to results page ..
AMImpl
public void apply() {
getTransaction.commit();
Where am i going wrong?
Thanks
Ashish

Hi,
I noticed that this error is occuring only under certain conditions.
In my application a particular record can have 4 statuses (Draft, Submitted, Cancelled and Technical Query). But when a record is being updated, it can only be updated to Draft, Technical Query or Cancelled.
The error occurs ONLY when i am trying to update a record which is in Submitted Status to any other status. If i update a record from Draft -> Technical Query/Cancelled, there are no issues!!!
I cant figure out where the problem lies.
The poplist picks up values from a lookup.
Any idea how to debug this situation?
Thanks
Ashish

Error while importing zip file for second time to B2B through ant script

[echo] args=import
importstatus:
[echo] Commandline arguments 1: [import]
[echo] Import with overwrite=true
[echo] B2BCommandLineUtility: importRepository: Error messages:
[echo] MDS-00521: error while reading document /soa/b2b/tpa_JOvrtiV-7030143
019445112136.xml from metadata repository
[echo] MDS-00520: failure to read document /soa/b2b/tpa_JOvrtiV-70301430194
45112136.xml because it is not in the metadata repository
[echo] MDS-00911: Document with name "/soa/b2b/tpa_JOvrtiV-7030143019445112
136.xml" and version 16 does not exist in the repository.
[echo] ORA-01403: no data found
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
[echo] ORA-06512: at line 1
[echo]
[echo] ORA-01403: no data found
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
[echo] ORA-06512: at line 1
[echo]
[echo] ORA-01403: no data found
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
[echo] ORA-06512: at line 1
[echo]
[echo]
Can anybody plz help???
Thanks in Advance!!!

Hi,
Even I am getting the same error while importing the .zip file for the second time through B2B console-->Administration-->Import/export tab.
But again it works for the third time..
Error Message:
Import of file OriginalProject.zip failed. MDS-00521: error while reading document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml from metadata repository MDS-00520: failure to read document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml because it is not in the metadata repository MDS-00911: Document with name "/soa/b2b/tpa_MnjhBHh-70301432125893445241.xml" and version 34 does not exist in the repository. ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1
Please help...

I keep getting a "Network Timed Out" error while trying to update to iOs5. Help?

I've tried about 100 times to update and every time I get an error saying that the network has timed out.

Temporarily disable any security software... anti-virus, firewall, malware, etc.

I'm getting network error while trying to update my itouch(2g) to ios 4.2

i tried downloading it thrice n got network errors all three times.
the error came when the download got over and when it was processing the file. please let me know if someone is facing the same problem it just isnt letting me update my ipod touch which is 2nd gen.

Try disabling your computer's antivirus and firewall during the download and update.
Are you sure your iPod is a 2G? a 1G can only go to 3.1.3
Identifying iPod models
If the shape of the black plastic on the back look like this it is a 1G.

Error While Trying to update RPM Second time in the same session as Create

Similar Messages

Maybe you are looking for