Error with DB REFRESH method using BRBACKUP and BRRESTORE

Hi can any one guide,
I have installed SAP ABAP Instance with SID as ECD.
I have taken backup using BRBACKUP method i.e. FULL bakup via OFFLine.
I have generated control file.
I have setup the same environment in another system.
I have installed Java.
I have installed Oracle.
I have installed CI with SID as ECP.
I have installed DB with option brbackup and brrestore method.
@ the stage "Oracle preload actions" it has prompt to continue with restore process.
Then I have copied the complete bkup i.e. ECD and
I have deleted Datafiles.
I have deleted Log files.
I have deleted Control files.
I have deleted Oraarch files.
I have changed the SID " ECD" to " ECP".
I have edited the generated control file u201Cecd_ora_2852.trcu201D.
And named it to control.sql file.
Note:- where exactly I should paste this file.
When I logged into brtools it has throwed an error as show below
BR0753E Control file E:\oracle\ora92\database\CTL1ECP.ORA not found
Note:- If I create this file i.e. CTL1ECP.ORA and what contents should I paste it in this or I should leave this empty file.
I have created this file as empty file.
It throwed an error
BR0280I BRRECOVER time stamp: 2009-11-01 10.28.00
BR0330I Starting and mounting database instance ECP ...
BR0278E Command output of 'E:\oracle\ora92\bin\SQLPLUS':
SQL*Plus: Release 9.2.0.7.0 - Production on Sun Nov 1 10:28:00 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> Connected to an idle instance.
SQL>
SQL> ORACLE instance started.
Total System Global Area 219750124 bytes
Fixed Size                   454380 bytes
Variable Size             134217728 bytes
Database Buffers           83886080 bytes
Redo Buffers                1191936 bytes
ORA-00205: error in identifying controlfile, check alert log for more info
SQL> Disconnected from Oracle9i Enterprise Edition Release 9.2.0.7.0 - Productio
n
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
BR0280I BRRECOVER time stamp: 2009-11-01 10.28.04
BR0279E Return code from 'E:\oracle\ora92\bin\SQLPLUS': 0
BR0302E SQLPLUS call for database instance ECP failed
BR0332E Start and mount of database instance ECP failed
BR0669I Cannot continue due to previous warnings or errors - you can go back to
repeat the last action
BR0280I BRRECOVER time stamp: 2009-11-01 10.28.04
BR0671I Enter 'b[ack]' to go back, 's[top]' to abort:
When I checked in alert file it is shows the below statements
ARCH: STARTING ARCH PROCESSES COMPLETE
Sun Nov 01 10:28:03 2009
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no FAL' ARCHARC0: Thread not mounted
Sun Nov 01 10:28:03 2009
ARC1: Becoming the heartbeat ARCH
ARC1: Becoming the heartbeat ARCHARC1: Thread not mounted
Sun Nov 01 10:28:03 2009
ALTER DATABASE   MOUNT
Sun Nov 01 10:28:03 2009
ORA-00202: controlfile: '%ORACLE_HOME%\DATABASE\CTL1%ORACLE_SID%.ORA'
ORA-27046: file size is not a multiple of logical block size
OSD-04012: file size mismatch
O/S-Error: (OS 1248) No more local devices.
Sun Nov 01 10:28:04 2009
ORA-205 signalled during: ALTER DATABASE   MOUNT...
Sun Nov 01 10:29:03 2009
ARC1: Thread not mounted
Prashanth

Hi,
Kindly find the last statements of the " ALERT file" that show the error.
Please let me know the sloution for this error.
Tue Nov 03 19:52:50 2009
ORA-1507 signalled during: alter database open resetlogs
Tue Nov 03 19:53:35 2009
ARC1: Thread not mounted
Tue Nov 03 19:54:35 2009
ARC0: Thread not mounted
Tue Nov 03 19:54:35 2009
ARC1: Thread not mounted
Tue Nov 03 19:55:35 2009
ARC1: Thread not mounted
Tue Nov 03 19:56:35 2009
ARC1: Thread not mounted
Tue Nov 03 19:57:35 2009
ARC1: Thread not mounted
Tue Nov 03 19:58:35 2009
ARC1: Thread not mounted
Tue Nov 03 19:59:35 2009
ARC0: Thread not mounted
Tue Nov 03 19:59:35 2009
ARC1: Thread not mounted
Tue Nov 03 20:00:35 2009
ARC1: Thread not mounted
Tue Nov 03 20:01:35 2009
ARC1: Thread not mounted
Tue Nov 03 20:02:11 2009
Shutting down instance: further logons disabled
Shutting down instance (immediate)
License high water mark = 2
Tue Nov 03 20:02:17 2009
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archiving is disabled
Shutting down archive processes
Archiving is disabled
Tue Nov 03 20:02:17 2009
ARCH shutting down
ARC0: Archival stopped
Tue Nov 03 20:02:17 2009
ARCH shutting down
ARC1: Archival stopped
Tue Nov 03 20:02:20 2009
ARCH: Archiving is disabled
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Tue Nov 03 20:02:20 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SCN scheme 2
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.7.0.
System parameters with non-default values:
processes                = 80
sessions                 = 96
timed_statistics         = TRUE
shared_pool_size         = 192937984
sga_max_size             = 429465824
shared_pool_reserved_size= 19220398
enqueue_resources        = 8000
control_files            = E:\oracle\ECP\origlogA\cntrl\cntrlECP.dbf, E:\oracle\ECP\sapdata1\system_1\cntrl\cntrlECP.dbf, E:\oracle\ECP\saparch\cntrl\cntrlECP.dbf
db_block_size            = 8192
db_cache_size            = 192937984
compatible               = 9.2.0
log_archive_start        = TRUE
log_archive_dest         = E:\oracle\ECP\oraarch\ECParch
log_buffer               = 1048576
log_checkpoint_interval = 0
log_checkpoint_timeout   = 0
db_files                 = 254
db_file_multiblock_read_count= 8
fast_start_mttr_target   = 900
log_checkpoints_to_alert = TRUE
control_file_record_keep_time= 30
dml_locks                = 4000
transaction_auditing     = FALSE
undo_management          = AUTO
undo_tablespace          = PSAPUNDO
undo_retention           = 43200
remote_os_authent        = TRUE
hash_join_enabled        = FALSE
background_dump_dest     = E:\oracle\ECP\saptrace\background
user_dump_dest           = E:\oracle\ECP\saptrace\usertrace
core_dump_dest           = E:\oracle\ECP\saptrace\background
optimizer_features_enable= 9.2.0
sort_area_size           = 2097152
sort_area_retained_size = 0
db_name                  = ECP
open_cursors             = 800
optimizer_mode           = choose
optimizer_index_cost_adj = 10
pga_aggregate_target     = 256271974
workarea_size_policy     = AUTO
statistics_level         = typical
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
Tue Nov 03 20:02:22 2009
ARCH: STARTING ARCH PROCESSES
ARC0 started with pid=8
ARC0: Archival started
ARC1 started with pid=9
ARC1: Archival started
Tue Nov 03 20:02:22 2009
ARCH: STARTING ARCH PROCESSES COMPLETE
Tue Nov 03 20:02:22 2009
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no FAL' ARCHARC0: Thread not mounted
Tue Nov 03 20:02:22 2009
ARC1: Becoming the heartbeat ARCH
ARC1: Becoming the heartbeat ARCHARC1: Thread not mounted
Tue Nov 03 20:02:23 2009
ALTER DATABASE   MOUNT
Tue Nov 03 20:02:23 2009
ORA-00202: controlfile: 'E:\oracle\ECP\origlogA\cntrl\cntrlECP.dbf'
ORA-27046: file size is not a multiple of logical block size
OSD-04000: logical block size mismatch (OS 512)
Tue Nov 03 20:02:23 2009
ORA-205 signalled during: ALTER DATABASE   MOUNT...
Prashanth

Similar Messages

Error message when importing data using Import and export wizard

Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126

Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Updated document about QuickTime errors with After Effects (re: H.264 and hyperthreading)

I just updated "troubleshooting QuickTime errors with After Effects CS5, CS5.5, and CS6" with information about hyperthreading and Apple's H.264 encoder.
The gist is that Apple's H.264 exporter component for QuickTime fails when the computer has a large number of CPUs.

No, this applies to any QuickTime H.264 export. You can export H.264 in a QuickTime .mov wrapper out of AME, too, and it will have this problem.
The various H.264 encoding presets (for YouTube, Blu-ray, Vimeo, iPad, etc.) don't use the H.264 QuickTime component, so this isn't relevant to them.
This problem is just relevant to choosing Apple's H.264 as the video codec when choosing QuickTime as a format. This applies to all software that uses QuickTime, by the way, not just Adobe software.

TS3899 With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this pro

With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.

Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad. Pay real close attention to the outgoing server name, and port. You may need to change in on the pad.

Errors while starting admin server using WLST and NodeManager

Hi I am trying to start admin server using WLST and NodeManager. I started nodemanager and WLST successfully. but when I am trying to nmConnect() command I am getting below errors. Please any one tell me where am I going wrong? I copied dumpStack() optput as well..
thanks
manohar
C:\oracle\Middleware\wlserver_10.3\server\bin>
C:\oracle\Middleware\wlserver_10.3\server\bin>java weblogic.WLST
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> nmConnect('weblogic','weblogic','localhost','5556')
Connecting to Node Manager ...
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O
=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificat
e list raised a certificate parsing exception PKIX: Unsupported OID in the Algor
ithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O
=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificat
e list raised a certificate parsing exception PKIX: Unsupported OID in the Algor
ithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The
loading of the trusted certificate list raised a certificate parsing exception
PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.
\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate p
arsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.84
0.113549.1.1.11.>
<May 3, 2011 10:45:02 AM EDT> <Notice> <Security> <BEA-090898> <Ignoring the tru
sted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading
of the trusted certificate list raised a certificate parsing exception PKIX: Un
supported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 123, in nmConnect
File "<iostream>", line 646, in raiseWLSTException
WLSTException: Error occured while performing nmConnect : Cannot connect to Node
Manager. : I/O error while reading domain directory
Use dumpStack() to view the full stacktrace
wls:/offline>
wls:/offline>
wls:/offline>
wls:/offline>
wls:/offline>
wls:/offline>
wls:/offline> dumpStack()
This Exception occurred at Tue May 03 10:45:03 EDT 2011.
weblogic.nodemanager.NMException: I/O error while reading domain directory
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClie
nt.java:299)
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClie
nt.java:312)
at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.jav
a:248)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerCli
ent.java:199)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerCli
ent.java:205)
at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.
java:52)
at weblogic.management.scripting.NodeManagerService.verifyConnection(Nod
eManagerService.java:179)
at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManage
rService.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx2.nmConnect$3(<iostream>:118)
at org.python.pycode._pyx2.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.pycode._pyx16.f$0(<console>:1)
at org.python.pycode._pyx16.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:180)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
weblogic.nodemanager.NMException: I/O error while reading domain directory
wls:/offline>
wls:/offline>

Hi manohar,
Please try the following article... (With Node Manager Communication type as "Plain" because it looks like you are getting PKIX security certificate chain message ) Just to isolate the issue
Topic: Start AdminServer And NodeManager Using WLST
http://middlewaremagic.com/weblogic/?p=6580
Thanks
Ravish Mody

Error while accessing a library using content and structure

I have a library having document and folder inside it. When I open the library using content and structure I get an error with a correlation ID. When checked the the logs with Correlation ID got an error message "View 'All Document' does not exist."
'All Document' is name of default view on the library.
When I open the library from view all site content the library is being opened.
Please help!!!

Hello Victoria,
Thanks for the response.
I have tried troubleshooting steps given by you.
Check if the issue occurs with other users. Use another user to access the library in Content and Structure and then compare the results. --
I tried with different users but no luck
Make sure that the user account with issue has permission to view the All Documents view of the library. --
Yes, user Account have the permission
Check if the issue occurs with other libraries in the Content and Structure. If not, I recommend to save the library as
a template including contents and then create a new library based on this template. After that use the new library instead of the old library. --
No other library have this problem. I cannot save the library as template including the contents as the it has many folders and files. The current size of library is 786 MB
Clear cache in the browser or use another browser to see if the issue still occurs. --
tries but issue persists.
Best regards,
Ratnesh

Errors with Time Machine (not completing backup, and needing to erase the ".inProgress" package)

I have in a previous discussion been talking about errors with my Time Machine backup. The errors were with a problem with Indexing a file, it fails and stops the whole backup. Each time it attemps another backup, it fills my ".inProgress" package with a (nearly) whole backup, filling my Time Machine hard drive, and thus errasing my previous good backups. The error occurs after about 95% completion.
In my last post of a similar disscussion, the problem was indexing the Preference Pane files and this caused the whole backup to fail. This was my last post there: (below in some additional info of my situation)
I did exclude the MobileMe.prefPane. And I got:
12/16/11 9:24:50.468 PM com.apple.backupd: Starting standard backup
12/16/11 9:24:50.556 PM com.apple.backupd: Backing up to: /Volumes/3 TB GoFlex Drive/Backups.backupdb
12/16/11 9:25:14.418 PM com.apple.backupd: Waiting for index to be ready (101)
12/16/11 9:27:02.366 PM com.apple.backupd: Deep event scan at path:/ reason:must scan subdirs|
12/16/11 9:27:02.366 PM com.apple.backupd: Finished scan
12/16/11 9:33:37.119 PM com.apple.backupd: Deep event scan at path:/Volumes/Mac OS Lion GM reason:must scan subdirs|
12/16/11 9:33:37.119 PM com.apple.backupd: Finished scan
12/16/11 9:36:15.650 PM com.apple.backupd: 758.92 GB required (including padding), 830.32 GB available
12/16/11 10:25:14.873 PM com.apple.backupd: Copied 22.8 GB of 630.5 GB, 782749 of 2357620 items
12/16/11 11:25:15.335 PM com.apple.backupd: Copied 86.6 GB of 630.5 GB, 1167675 of 2357620 items
12/17/11 12:25:16.227 AM com.apple.backupd: Copied 152.2 GB of 630.5 GB, 1393795 of 2357620 items
Dec 17 01:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 305.2 GB of 630.5 GB, 1413946 of 2357620 items
Dec 17 02:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 457.1 GB of 630.5 GB, 1419190 of 2357620 items
Dec 17 03:19:07 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 1736865 files (568.3 GB) from volume Macintosh HD.
Dec 17 03:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 572.1 GB of 630.5 GB, 1848939 of 2357620 items
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Indexing a file failed. Returned 200 for: /Volumes/Mac OS Lion GM/System/Library/PreferencePanes/Mouse.prefPane, /Volumes/3 TB GoFlex Drive/Backups.backupdb/Tom iMac/2011-12-14-171406.inProgress/7DB524DD-EFB9-42A6-8A21-0A2A312EDA6D/Mac OS Lion GM/System/Library/PreferencePanes/Mouse.prefPane
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Aborting backup because indexing a file failed.
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Stopping backup.
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 2164998 files (581.1 GB) from volume Mac OS Lion GM.
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copy stage failed with error:11
Dec 17 03:40:50 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Backup failed with error: 11
This time it was the Mouse.prefPane that caused the error. I'd like to exclude the entire PreferencePanes directory.
This was my error message this time:
I just realized this was on my small Developers partition. Perhaps there is an error with the build, OR an error with the initial restore. I'd like to perhaps exclude the entire /Volumes/Mac OS Lion GM. I expect that Time Machine is working fine with my main partition and the error happens when it's almost done with the Mac OS Lion GM partition.
The problem now is that I only have 265 GB of 3 TB available on my Time Machine HDD. If attempt another backup, it'll surely erase about 410 GB of my past saved backups. I've already lost 6 months, and I only have two months left of backups. I need to erase the ".inProgress" package again. That'll take time, and it's impossible to do from this main partition, even at root access. This ".inProgress" has a total of two (nearly) full backups; it didn't cleanup the first full backup attempt while starting the second,perhaps it would have had it finished. But I fear even if I exclude the whole "Mac OS Lion GM" partition, It'll create a third full backup before cleanup and erase ~400 GB of previous good backups. Then, I'll have a total of 4 (nearly) full backups! 3 TB is just enough without any past backups.
Maybe I'll just copy my documentations of my 'errasing the ".inProgress" package' last time (from the Mac OS Lion GM partition) and do a full restore of just that partition. Thus erasing the errors all together. If it doesn't fix the errors then this could be a bug in the build that doesn't allow Time Machine to work. I've always included this partition in Time Machine before, even with other Lion builds, so I suspect that it was an error in the initial restore. (I may be answering my own questions, and that the inital restore (of the small partition) is the problem, and I just need to re-restore the small partition)
Again, I'm going to have to erase the ".inProgress" file to regain 1.53 TB of space before proceeding.
Also, I gave myself permission to read the ".Backup.345781513.887697.log", the log that was created last night when I first started Time Machine this last time. It was interesting, but didn't show the error I could see from the console.
Right now, mds and mdworker appear to be going crazy even after I just now turned off Time Machine. I think I'll let it go for the rest of the night. Then I'll work on erasing the ".inProgress" package from the other partition boot up.
That was my entire last post. To add some information, I have two OS X partitons, both Mac OS X Lion. One is my large main partition, the other is one I don't mind testing with. I recently replaced my internal hard drive in my iMac and restored from Time Machine both partitions. This appeared to go smoothly. But I have yet to create a single successful Time Machine backup since. At first it was doing a Full Backup, which I didn't like, but now it just aborts around 95% completion. Each, time, it tries it fills the Time Machine hard drive with duplicate (nearly) full backups errasing my older good backups. I would like to erase the ".inProgress" file to save space.
My main question in this new discussion is does anyone know of a good way of erasing the ".inProgress" file? This is so I can preseerve my previous backups. ACLs and other permissions seem to make it impossible to erase from this startup partition, the one I'm running Time Machine from. Even at root level, if I give myself permission to change permissions or delete a file, it'll say Operation not Permitted instead of Permission Denied. I have been able to delete this ".inProgress" package before when booting from the other partition, but with great difficulty. I have had much help from another Member in this Support Community when it comes to solving my Time Machine problems. I think I have found the problem (indexing files in my small OS X partition), as stated in my copy& pasted post above, but I really need to delete this inProgress package first to save space before continuing!

Pondini wrote:
Gator TPK wrote:
Now I'll have to fix the small partition? How's the best way to do this? There could be thousands of files that won't index fine.
See if there's anything you haven't done, that applies, in the pink box of #C3 in Time Machine - Troubleshooting
Otherwise, since most (or all?) of the indexing errors are in OSX, you might want to just reinstall it. Something may have gone wrong sometime, that damaged those files.
I reviewed #C3 in Time Machine - Troubleshooting and I have already done most of those things. I have just learned something new though:
When I included my Main OS X partition again, I got an indexing error for the first time for that partition. I might be interesting to note that the _spotlight process was running, and it's running again (the magnifying glass has a dot and it generically says "Indexing Tom's iMac"). mdworker, mds and backupd processes really are working hard, one moment they used over 500% of my CPU. It's nice to know for once quad core is good for something other than video encoding. (Now if they could just get the Finder to do more than 100.1%, only 1 thread is doing 100%, I'd like to see file size calculations 8 times quicker!)
I never got an indexing error once in the past 2 weeks for that large Mac OS X v10.7.2 main volume, and it had appeared to finish that partition backup before running into problems with my smaller test partition. Also, I had just updated the smaller test partition with a later build of Mac OS X. But It appears that the beta builds are clearly not the problem. I thought I could just restore again (from the December 4th backup) the small partition and both would be fine.
I'll finish reviewing all the suggestions on Time Machine - Troubleshooting and go from there. Hopefully, the _spotlight indexing simutaniously was the only problem. It's strange that the indexing hasn't happened since the original restore last week untill I finally got a good clean complete partial Time Machine backup. Why would the first Time Machine backup trigger indexing again?
For now, I'm going to exclude the Main Partition again, and let another good backup run. And try your suggestions. (And wait till mds, mdworker, etc. to finish!)
I have the logs of the first two sucsessful backups and the last two failed backups from the last 3 hours, if that would help.?

Login error with correct u/p using Oracle Application Server / BPEL

Hello,
We are using Oracle 11g and BPEL 10.1.3.4. We had everything working fine until earlier this week. We were receiving an exception when accessing the database from our BPEL process.
Unable to establish connection to "iCareConnectionPool". Error message: Exception occurred testing connection. Exception: java.sql.SQLException: ORA-01017: invalid username/password; logon denied.
I went into the Application Server control and tested the data source and connection pool and they both failed with the login error. The userid and password being submitted is correct. I checked the data-source.xml file and the id/password looked good. Here are the steps I performed.
On BPEL server:
1)     Deleted connection pool iCareConnectionPool, data source, iCareDataSource, and removed /eis/db/iCareDataSource from the DBAdapter.
2)     Created new connection pool – iCareConnectionPool using jdbc:oracle:oci:@//<host>:1521/ORCL with userid IDS
3)     The connection pool test was successful. Clicked finish to create connection pool
4)     From the JDBC resources screen, I tested the connection pool and it failed with invalid logon error.
5)     Modified connection pool to use IDS2 and it worked.
6)     Modified connection pool to IDS and it failed.
7)     Modified connection pool to jimc and it worked.
On Database:
1)     Created new schema/user ICAREIDS
2)     Connected using SQL Developer and I could connect
On BPEL Server:
1)     Deleted connection pool
2)     Created connection pool iCareConnectionPool using jdbc:oracle:oci:@//<host>:1521/ORCL with userid IDS
3)     The connection pool test was successful. Clicked finish to create connection pool
4)     From the JDBC resources screen, I tested the connection pool and it failed with invalid logon error.
5)     Modified connection pool to use IDS2 and it worked.
6)     Created new connection pool TestPool – same results
7)     Tried jdbc:oracle:thin:@//<host>:1521/ORCL - same results
On my local system BPEL server:
1)     Created connection pool iCareConnectionPool using jdbc:oracle:oci:@//<host>:1521/ORCL with userid IDS
2)     The connection pool test was successful. Clicked finish to create connection pool
3)     From the JDBC resources screen, I tested the connection pool and it failed with invalid logon error.
4)     Modified connection pool to use IDS2 and it worked.
5)     Modified connection pool to use ICAREIDS and it failed.
Since it failed on two different BPEL server's, I am wondering if it is something with the database. I can connect using existing schema's but not IDS or any new schemas. However, I can connect to any schema using any other tool like SQL Developer.
Can anyone provide an insight as to what could be happening here.
Thanks,
Jim

I found the problem and wanted to pass on the solution in case any one else runs into this problem.
With Oracle Database 11g the passwords are now case sensitive. Because the BPEL server is using 10g drivers the login fails if you have capital letters in your password.

Problem with M-JPEG by using JMF and JPEGCodec .

Hi, there,
I want to implement a M-JPEG using JMF and JPEGCodec, is that possible?(I already been trapped)
My problem is I have a video clip which is a AVI file, the video format is following:
Video format: RGB, 160x120, FrameRate=14.9, Length=57600, 24-bit, Masks=3:2:1, P
ixelStride=3, LineStride=480, Flipped.
I already convered a frame to an Image object(video format with JPEG and CVID doesn't work) ,
I can also convert this Image back as a Buffer, It works fine with me .But to use JPEGCodec( provided by com.sun.image.codec.jpeg ) I need to convert an Image to a BufferedImage, I use the following defination:
BufferedImage bImage = new BufferedImage(frameImage.getWidth(null), frameImage.getHeigh(null),BufferedImage.TYPE_INT_RGB); It seems work, But when I use JPEGImageEncoder to encoder this bImage and save as a jpg file,
everything is black .
I also need to cast BufferedImage to an Image: frameImage = (Image) bImage; then I convert frameImage back to Buffer.My video clip still running , but every frame now became black .
can someone help me? thanks in advance.

I solved this problem . But I met a new problem.
I converted the above video clip into a JPEG and I want to create a DataSink for it. the messege is:
Video format: JPEG, 160x120, FrameRate=12.0, Length=3574
- set content descriptor to: AVI
- set track format to: JPEG
Cannot transcode any track to: JPEG
Cannot create the DataSink: javax.media.NoDataSinkException: Cannot find a DataS
ink for: com.sun.media.multiplexer.RawBufferMux$RawBufferDataSource@2b7eea
Transcoding failedHope some Java Experts can help me.
Regards.

Communication error with Epson R2880 printer using Snow Leopard 10.6.4

I am having trouble printing with my Epson R2880 printer on my Mac Pro running OS X 10.6.4 with the most recent software updates. The printer prints about a quarter of the print and then quits giving a "Communication error" message. I have tried uninstalling and then reinstalling the printer and downloading the latest driver form Epson. My other printer, a cheap Canon printer, works fine on the computer with 10.6.4 and the R2880 printer works fine with my old G5 running 10.4.11. Any ideas?

Thanks John. I tried deleting the Epson printer folder from the library like you said and then checked for Software Updates. But Apple did not indicate that there were any for my OS (probably because I had installed the latest OS update this morning). So I installed the driver from the Epson site with the printer folder removed. But this did not work because when I tried to print the computer indicated that there were missing files. So, I reinstalled the Epson folder that I had just moved to trash, deleted the new Epson folder, then tried reinstalling the Epson driver with the original folder in place. THIS WORKED! Finally, I am off and printing but with little knowledge gained about the inner workings of my computer.

Deployment error with LabVIEW 8.0 using a Desktop PC as a RT Target

Hello!
I am attempting to use LabVIEW Real-Time 8.0 with a desktop PC as the RT Target.
Everything appears fine when I look at the computer using MAX. I can fiddle with the Target’s IP, install software and transfer files between my Windows machine and the RT machine without any difficulties.
To get started with LabVIEW I have followed the instructions in NI’s document: "Getting Started with the LabVIEW Real-Time Module".
( A copy may be found at this location: http://www.ni.com/pdf/manuals/371375a.pdf )
My difficulties arise under the "Creating a Real-Time Project and Application" subsection, which begins on page 8 of the document.
I follow the instructions to create a project using the Real-Time Project Wizard and all goes well – I can connect to the target without issue in LabVIEW and monitor its performance with the Real-Time System Manager – until I try to deploy and run the VIs on the RT Target.
The deployment process fails nearly without exception every time I try to deploy any of the dependent VIs using the Project Explorer (I say nearly because maybe 1/100 times a VI is deployed successfully). I believe all the permissions have been properly set (in both LabVIEW and Windows) to allow the host and the target to communicate and collect data so I am not sure what the problem is.
Interestingly enough, VILIB dependencies always deploy successfully -- And the intrigue does not end there! If I build a standalone Real-Time application (like that detailed on pages 18-21 of the manual linked above) I am able to deploy to the RT Target. Setting the application to run on startup, the RT computer successfully reboots and is able to generate a sine wave and I can view using the host VI on My Computer.
I would like to be able to build and deploy VIs freely using the Project Explorer but am not sure how to achieve this seemingly simple goal. If anyone has encountered a problem similar to mine even feels that they know if the problem is related to hardware or software the help would be much appreciated.
Thanks,
Tom

Bob,
My System uses Windows XP. I use MAX 4.0.0.3001 to install software on the Real-Time computer. I am using LabVIEW 8.0 to deploy VIs to the Real-Time System. Also, if its any help, I am a D-Link DGE-550T Gigabit Ethernet Adapter.
The Remote System uses LabVIEW Real-Time 8.0. Note that a fair amount of software to add functionality to the system has also been installed here from My System via MAX.
Here is an example of how my Deployment fails:
I follow the instructions in "Getting Started with the LabVIEW Real-Time Module" and create a project using the Real-Time Project Wizard. (The contents of such a program may be viewed in a picture that is included in the ZIP file I have attached.)
I open the LVPROJ window and proceed by connecting to my RT device. I right click on the target and choose 'Connect'.
A Deployment window will pop up and display the following text:
Deploying RT (successfully deployed target settings)
I close the window and proceed to deploy my primary VI titled 'target - multi rate - variables - fileIO.vi. I right-click on the target and choose to deploy. Again, a deployment window will pop up - this time with the following text:
Deploying My Computer
Deploying variables - network - RT.lvlib
Deploying variables - network - RT.lvlibistop \\192.168.1.2\ variables - network - RT\stop.
Deploying variables - network - RT.lvlibidata \\192.168.1.2\ variables - network - RT\data.
Deploying RT (successfully deployed target settings)
Deploying support - acquire data.vi (3.20K)
Deploying Trim Whitespace.vi Failed to download Trim Whitespace.vi
The deployment usually, but NOT always, fails on Trim Whitespace.vi. In any case, the deployment will always fail for some VI and continue to fail in the same manner until My System is rebooted. Attempting to individually deploy any of the VIs also fails the vast majority of the time and if any VI fails it will continue to do so (...until a hard reboot, in which case it may or may not fail assuredly).
Attached to this post is a ZIP containing all the files associated with this RT Project (not including the libraries of dependencies associated with LabVIEW, of course).
If you feel that more information about hardware or software in use would be useful, please ask.
Thanks,
Tom
Attachments:
LabVIEW RealTime Project.zip ‏193 KB

I can't type with Chinese Input Methods in Mail and Notes

Today I suddenly can't type/input any word or character in Mail and Notes
when the input method switches to any Chinese input method like Zhuyin, Yahoo KeyKey and Bopomofo.
Even the cursor won't move when I press the " ↑↓←→"
The keyboard just doesn't work from " ` " to "→" when it comes to Chinese input methods.
However,
the keyboard works well as soon as I switch to English input method and I can type English in Mail and Notes.
I can type with any Chinese input methods in Chrome, TextEdit, Reminder, iPhoto, Contacts,......etc..
Is there something wrong with Mail and Notes?
Could anyone help me solve the problem?
Thank you!

Thank you, Tom.
I have posted my issue there and hope for the best
btw,
I had the same problem (cannot input any word and move the cursor with Chinese input methods) in Evernote.
Evernote Support helped me solve it.
Here is how it works (for Evernote only).
Ticket # 16051-XXXXX
We believe that reinstalling the latest Mac version may address the issue that you reported. Please perform the following steps:
Quit Evernote from the elephant icon in the Menu Bar
Drag the Evernote application to the system Trash
Reboot your Mac
Download and install the latest version of the Mac client:
http://www.evernote.com/about/download/get.php?file=EvernoteMac
When you open the download, make sure to drag the Evernote icon into the Applications folder instead of running it from within the installer package.
Eject the disk image and delete the installer file before you runEvernote.
Let us know how this works for you.
Thank you.
Tania

Possible error with viewing same site on desktop and iPad

Site is viewing correctly on desktop but on iPad everything not pinned is being pushed to left with white space to the right of page.
There are no hidden or active elements off the page anywhere..

Here is an observation.
With Acrobat Reader 11.0.02 installed on OS X 10.8.2 and Windows 7 (with latest updates), the reported default page display resolution in Reader's preferences is 81 for OS X, and 96 for Windows. What this means in English is that PDF that are viewed on OS X appear noticeably smaller than when viewed at 96 ppi. Like looking backwards through binoculars.
What happens if you adjust the Reader custom display resolution to 96 ppi. Does this improve the visuals with Windows counterparts?
On IOS, and in particular, later models of iPad and iPhone, you are looking at PDF at default display resolutions upwards to 326 ppi. I would hope that the PDF look sharper on IOS 5/6 than they do on OS X. Try setting the custom display resolution in Adobe Reader on OS X to 326 ppi. Notice any sharper (albeit) huge resolution difference?
Are you requesting the “Best” setting for Pages PDF export, or “Better.” There is a 150 ppi resolution difference for text in those settings.

Error while uploading Product master with LSMW Idoc method using XIF

Hi Madhura,
Please check it out the length of material field and maintain the guid for the product , check it out the atatus maintained to maintain the product i.e insert(I) or Update(U).
Regards,
Naveen
Edited by: Naveen Kumar on Jul 7, 2009 4:35 PM

Hello,
I could identify the error. It was due to incorrect UOM. Problem resolved.
Thanks,
Madhura

Syntax Error with JSON.Parse method to parse SharePoint List Items

Hi All,
I want to get SharePoint List data and bind that retrived data to the JQuery Grid Control.
For this I used SPServices to get the SharePoint List data in SOAP Envelope. Now I need to parse the soap envelope and store the retrieved items in array to pass it to the Grid Control.
While using the JSON.Parse(resporseText) method, Iam consistenly getting an Syntax Error!
Could anyone help me with this ?
Please find the SOAP Envelope I received from SP List as below:
"<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><GetListItemsResponse xmlns="http://schemas.microsoft.com/sharepoint/soap/"><GetListItemsResult><listitems xmlns:s='uuid:BDC6E3F0-6DA3-11d1-A2A3-00AA00C14882'
xmlns:dt='uuid:C2F41010-65B3-11d1-A29F-00AA00C14882'
xmlns:rs='urn:schemas-microsoft-com:rowset'
xmlns:z='#RowsetSchema'>
<rs:data ItemCount="2">
<z:row ows_OBNumber='112211.000000000' ows_Project_x0020_Name='Project 1' ows_MetaInfo='11;#' ows__ModerationStatus='0' ows__Level='1' ows_Title='Project 1' ows_ID='11' ows_UniqueId='11;#{FBBCBCF9-666D-42F9-92D7-67188C51BC9B}' ows_owshiddenversion='1' ows_FSObjType='11;#0' ows_Created='2015-01-12 10:25:06' ows_PermMask='0x7fffffffffffffff' ows_Modified='2015-01-12 10:25:06' ows_FileRef='11;#sites/Lists/Projects/11_.000' />
<z:row ows_OBNumber='1122343.00000000' ows_Project_x0020_Name='Project 2 ' ows_MetaInfo='12;#' ows__ModerationStatus='0' ows__Level='1' ows_Title='Project 2' ows_ID='12' ows_UniqueId='12;#{0D772B76-68E4-4769-B6FF-6A269F9C7ABD}' ows_owshiddenversion='1' ows_FSObjType='12;#0' ows_Created='2015-01-12 10:33:48' ows_PermMask='0x7fffffffffffffff' ows_Modified='2015-01-12 10:33:48' ows_FileRef='12;#sites/Lists/Projects/12_.000' />
</rs:data>
</listitems></GetListItemsResult></GetListItemsResponse></soap:Body></soap:Envelope>"
Any help on this will be greatly appreciated.
Thanks In Advance.!

Hi,
According to your description, there is an issue when parsing result from the data retrieved using SPServices.
By default, SPServices returns data as XML format, however, the JSON.parse() method “Throws a SyntaxError exception if the string to parse is not valid JSON”:
https://developer.mozilla.org/en/docs/Web/JavaScript/Reference/Global_Objects/JSON/parse
To extract the data needed from the response, you can either take the demo below for as a reference:
http://spservices.codeplex.com/wikipage?title=GetListItems
Or use the jQuery.parseXML() function:
http://api.jquery.com/jquery.parsexml/
Best regards
Patrick Liang
TechNet Community Support

Error with DB REFRESH method using BRBACKUP and BRRESTORE

Similar Messages

Maybe you are looking for