Error with MDM Adapter.

Dear Experts,
We are working on PI MDM adapter. We are facing below error in PI Communication Channel...
" MDM Adapter listener could not start due to: Can not create repository
session '<server=XXXX serverUser=Admin
repository=XXXX user=Admin>' caused by: Path to object does
not exist at MDM Factory, the whole lookup name is deployedAdapters/MDM
Factory/shareable/MDM Factory. "
Any one please help us to resolve the issue.
Thanking you.
Hemanth.

Hey,
Please have a look at SAP Note 1468614.
You need to apply a patch to fix this issue.
Thanks
Aamir

Similar Messages

Communication Channel Error with MDM PI Adapter

Dear Experts,
We had new sever for PI(image copy). In new PI server we are facing problem only with MDM adapterin communication channel monitoring and below error occuring.
*" MDM Adapter listener could not start due to: Can not create repository session '<server=SAPMDMD serverUser=Admin repository=TTSL_Vendor_Dev user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'SAPMDMD' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer "
Any expert please help us to resolve this.
Thanks in advance.
Regards,
Hemu.

Hello Heymanth,
Make sure that connection is fine between systems. Test the RFC's in both systems. Also check the services too.
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario
/people/ramesh.gulipalli2/blog/2009/11/16/sap-47-to-mdm-integration-using-pi71-part1
Regards
Pothana

JCA Binding error with FTP Adapter on put operation

Hi
I am facing a problem with put operation with ftp adapter. my soa service will get file from the 1st ftp server (Unix) as attachment and is putting the file on another ftp serve(Unix)r. the put operation is failing with the below error:-
Non Recoverable System Fault :
<bpelFault><faultType>0</faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: Error sending file to FTP Server. Error sending file to FTP Server. Unable to send file to server. Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary></part><part name="detail"><detail>Unexpected termination: Socket closed</detail></part><part name="code"><code>null</code></part></remoteFault></bpelFault>
this is a SFTP server and the corressponding property is set to true on the configuration. I had also recreated the jndi again & also increased the max connections to 700, but still facing the same issue. Also i am able to ftp the files to this location through filezilla. Also i continously getting the below errors in soa_server1.out:-
<Jul 24, 2012 7:25:11 AM CDT> <Error> <oracle.soa.bpel.engine> <BEA-000000> <Unhandled exception for ComponentDN=default/NShoreAccrualConcService!1.0*soa_9113be23-2e93-4e54-9987-2e8ae5a4b2e6/ProcessNShoreAccurals CompositeInstanceId=330020 ComponentInstanceId=330018>
<Jul 24, 2012 7:25:11 AM CDT> <Error> <oracle.soa.bpel.engine> <BEA-000000> <This exception occurred because the fault thrown in the BPEL flow was not handled by any fault handlers and reached the top-level scope. Root cause :
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}remoteFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{
summary=<summary>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: Error sending file to FTP Server.
Error sending file to FTP Server.
Unable to send file to server.
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</summary>
,detail=<detail>Unexpected termination: Socket closed</detail>
,code=<code>null</code>}
     at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:338)
     at com.collaxa.cube.engine.ext.common.InvokeHandler.__invoke(InvokeHandler.java:1059)
     at com.collaxa.cube.engine.ext.common.InvokeHandler.handleNormalInvoke(InvokeHandler.java:586)
     at com.collaxa.cube.engine.ext.common.InvokeHandler.handle(InvokeHandler.java:130)
     at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:74)
     at com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform(BaseBPELActivityWMP.java:158)
     at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:2543)
     at com.collaxa.cube.engine.CubeEngine._handleWorkItem(CubeEngine.java:1165)
     at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1071)
     at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:73)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:220)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:328)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4430)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4361)
     at com.collaxa.cube.engine.CubeEngine._createAndInvoke(CubeEngine.java:698)
     at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:555)
     at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:673)
     at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:293)
     at sun.reflect.GeneratedMethodAccessor1687.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:94)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor.runJaasMode(JpsAbsInterceptor.java:81)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:112)
     at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:105)
     at sun.reflect.GeneratedMethodAccessor1119.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
     at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy277.handleInvoke(Unknown Source)
     at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.__WL_invoke(Unknown Source)
     at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:39)
     at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.handleInvoke(Unknown Source)
     at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:35)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:140)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatchTask.java:88)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:64)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:662)
>
<Jul 24, 2012 7:25:11 AM CDT> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-000000> <failed to handle message
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}remoteFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{
summary=<summary>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: Error sending file to FTP Server.
Error sending file to FTP Server.
Unable to send file to server.
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</summary>

Error itself indicates the potential issues -
Please ensure
1. Specified remote output Dir has write permission
2. Output filename has not exceeded the max chararters allowed by the OS and
3. Remote File System has enough spaceRegards,
Anuj

BPEL: invalid namespace error with DB adapter polling and java embedding

Hello
I'm using bpel 10.1.3.1.0, and I'm experiencing the following problem: I'm am not able to use the SetTitle() function in a process which polls for records using the db adapter.
Steps to reproduce the problem:
- I create a very simple bpel process which poll for records in a table.
- I deploy it, write manually a record in the polled table and the process start.
- I can see the record picked up through the visual flow in the console
- everything looks ok and the process ends correctly
- now I add a java embedding activities just after the receive
- I set the instance title like this: setTitle("Go");
- redeploy, write a record in the polled table and the process start.
- but the process ends in error with the following message "XMLDOMException has been thrown. invalid namespace for prefix xmlns"
And there is no way to make it work. Consider:
If I put the same java embedding activity in another process, for example a simple asynchronous process which just copy the input to the output, and I run from the console, the instance title is set as I want ("Go")
If I remove the three lines from the polling process
<bpelx:exec name="Java_Embedding_1" language="java" version="1.3">
<![CDATA[setTitle("Go");]]>
</bpelx:exec>
then the process is executed correctly again. I add them again and then namespace error.
Whatever statement I put in the java embedding activity (for example a string concatenation or even just a comment I have the same result: invalid namespace for prefix xmlns.
Does anybody has a suggestion to evercome the problem? I need to set the title because its a mess to find out which instance processed a specific record.
Thanks by
Paolo

I made a lot of further tests, and I can say the problem is related only to the database adapter polling mechanism.
If I create an asynchronous process, with any kind of database activity (for example select) I can set the title normally.
If I create a process which start with database table polling, then I cannot use the java embedding.
try this:
- create BPEL empty project
- drop a database adapter service and follow the wizard:
- select a connection (I tried both oracle or sqlserver connection)
- select "poll for new or changed record"
- select any table empty or with few record inside (1 or 2)
- press next 4 times
- chose delete record after read (press next)
- chose order by "no ordering" in polling options (press next 2 times)
- now drop a receive activity on the process, and connect with the polling partner link
- drop a java embedding and write any valid java statement
- deploy; if the table is empty, write a recod in the table
- the process is instantiated, but the it fails in the --> receive <-- activity with "invalid namespace" error

Error with mail adapter

Hi,
I have an idoc to email scenario.
The email is to be triggered, in case of an error in one of the idoc field values.
The email, is being triggered successfully as seen in sxi_monitor. But, the receiver mail adapter is failing(as seen in adapter monitoring).
The error as seen in adapter monitoring:
<b>error occured: [2006-10-03T12:34:02Z] unable to call the mailer; com.sap.aii.messaging.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.io.IOException: server not responding OK to MAIL FROM; 501 5.5.4 Invalid Address</b>
This is not an issue with the address specified, because, there are other interfaces which are using the same adapter to send mails successfully.
MDT(Messaging system) specifies error as GENERAL_ERROR.
Any hints?
Thanks,
Smitha.

Hi,
>>> MDT(Messaging System), the error is specified as GENERAL_ERROR.
then maybe you need to ask some General about it?
or at least a Colonel? ))
but frankly saying there must be a difference
it it works in once case and doesn't in the
other don't you agree? so all you need to do
it is to find it
Regards,
michal

Error with Database adapter

Hi All,
I am using a database adapter to write values to database.The build was successful.However when i test it in the console with the sameple input I am getting the below error.
ERROR:
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Client received SOAP Fault from server : Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. NGW_PP_DBAdapter:Write_DB_Adapter [ Write_DB_Adapter_ptt::insert(StgProductportfolioCollection) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/DB_Conn'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/DB_Conn. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception.
Can anyone help me out to fix this error.
Thanks in advance.

From the error it is clear that your composite is not able to find the DB jndi.The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/DB_Conn'.
Please follow these steps:
1) Have u created DB jndi eis/DB/DB_Conn that you are using on weblogic console.
2) After creating did you redeploy the DB adapter on weblogic console.
3) If you have done above 2 steps cross check your jndi exists in ur DB adapter or not on weblogic console.
That could only be the possible reasons for the error you are getting.
Hope this helps.
Regards,
Karan
Oracle Fusion Middleware Blog

Error with JMS adapter

We are using a JMS adapter with XML input files and we are getting the following error:
:#1.#00144F80C55600310000001A00001BC700DD9B18A4E85181#1288983973313#com.sap.engine.messaging.impl.core.queue.consumer.SendConsumer##com.sap.engine.messaging.impl.core.queue.consumer.SendConsumer.handleRetriesOnException(MessagingException, QueueMessage, MessageController)#J2EE_GUEST#223963##<applicationserver_hostname>_<SID>_623765##8bfba530dea111dfbf9b00144f80c556#MS Queue Worker [JMS_http://sap.com/xi/XI/SystemSend]##0#0#Error##Java###Transmitting the message to endpoint using connection failed, due to: .#3#JMS_http://sap.com/xi/XI/System#com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.io.IOException: Error writing to server#http://<hostname>:50000/sap/xi/engine?type=entry#
One that is interesting is that these errors are occurring on application servers only. Could it be that the Integration Server URL is not fully qualified. In the SLD it's just <hostname>, not <hostname>.test.com (as an example).
Any help is greatly appreciated.

Dear George,
Concerning the issue, in the Integration Engine please try increasing the value of the parameter :
   - icm/HTTP/max_request_size_KB
from the default size of 100MB to e.g., 2GB.
Kindly go through the following link :
- http://help.sap.com/saphelp_nwpi71/helpdata/en/58/108b02102344069e4a31758bc2c810/frameset.htm
for details.
Additionally, it is recommended to setup a large message queue,
i.e.,
add an entry and appropriate value (e.g., 20480 KB) for the TUNING parameter : 'EO_MSG_SIZE_LIMIT'
using
TCODE
   sxmb_adm
    Integration Engine Configuration
      Select Edit mode and Add the TUNING parameter
I Hope this helps.
Best Regards
Nishwanth

Error with file adapter

HI ALL,
Our Secnario is Bapi to File.Hear in the Target side we have two target folders.For that I am internally place my file in the PI and pick up the file from PI and posted to end directories.For that Hear i am using 2 flows form BAPI to FILE.But problem is when i am monitoring the Receiver comm channel at target PI system its shows some error like Unable to clone File Adapter receiver channel for parallel processing and files are not posted in the target system
please provide the better solution for this issue
Thanks & Regards,
Satya

Hi,
I am internally place my file in the PI and pick up the file from PI and posted to end directories
Elaborate that process.
How to split the target directories. In this scenario is BPM? or Any rule implemented in Receiver determination.
Regards
Vijaykumar

Error with HTTP Adapter

Hi all,
I have a scenario in which i am sending an IDoc to a Oracle Table. This sends back an acknowledgement to an HTTP Receiver which is finally sent as an ALEAUD Idoc to the sender system.
The data is getting posted to the table and the acknowledgement is also getting sent.
But the HTTP Server is throwing following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Message ID 071700DC367DAA44A325E05C11D66B14 already exists in called system (pip</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Http server code 500 reason Internal Server Error explanation Message ID 071700DC367DAA44A325E05C11D66B14 already exists in called system (pip</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The path that i have mantioned in the Receiver Communication Channel is:
/sap/xi/adapter_plain?namespace=http://namespace-Idoc2JDBC&interface=ALEAUD_out_asy&service=ITCXI1&QOS=EO
Pls if anybody could guide as to what could be the possible error.
Thanks in advance.
Regards
Neetu

Hi Neetu,
This SAP Note may help you - 804124
Also make sure that Http server service available. And configuration is correct
Regards,
Moorthy

Errors with Resource Adapter with data source as "http header"

hi Team,
The objective was to create a ResourceAdapter that will get accountid from http-header and automatically log me in. More like Siteminder, Tivoli Access Mgr.
In the adapter's "prototype.xml", I added this line.
"<AuthnProperty name='sauid' displayName='UserID in From Browser' formFieldType='text' isId='true' dataSource='http header'/>
I enable pass-through authn for "user-interface" app.
My test passes, when I login to "/idm/user". I am not prompted for uid/pwd instead I am
transparently logged and presented with self-service page, aka single-sign-on. so far so good.
But, I have an issue when when I login to /idm (not /idm/user) as configurator and then try to create a new user.....I donot see the set password fields in modify.jsp. This issue is only apparent if I set enable pass-through for user-interface. If I reset the user interface to default, which is userid/pwd, then I do see set-password-fields in modify.jsp.
Any leads on why this could be happening?

Hi Asam,
If we want to create a parameter depend on another dataset, we can additional create or add the dataset, embedded or shared, that has a query that contains query variables. Then use the option that “Get values from a
query” to get available values. For more details, please see:http://msdn.microsoft.com/en-us/library/dd283107.aspx
http://msdn.microsoft.com/en-us/library/dd220464.aspx
As to the Report Builder features, we can refer to the following articles:http://technet.microsoft.com/en-us/library/hh213578.aspx
http://technet.microsoft.com/en-us/library/hh965699.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error with PI MDM Adapter

Dear Experts,
We are working on PI MDM adapter. We are facing below error in PI Communication Channel...
" MDM Adapter listener could not start due to: Can not create repository
session '<server=XXXX serverUser=Admin
repository=XXXX user=Admin>' caused by: Path to object does
not exist at MDM Factory, the whole lookup name is deployedAdapters/MDM
Factory/shareable/MDM Factory. "
Any one please help us to resolve the issue.
Thanking you.
Hemanth.

Hello Hemanth
Please do not cross post the same issue on several different forums. This is against the forums etiquette :).
error with MDM Adapter.
Regards
XI/PI Moderator

MDM Adapter: MDM Adapter listener could not start (MdmSecureSocketFactory)

Hi there,
We are running the following versions of the PI MDM adapter:
MDM_ADAPTER 710.700 SP7 (1000.710.700.7.0.20110411174317)
MDM_JAVA_API 710 SP5 (1000.710.0.5.111.20101227095400)
com.sap.mdm.tech.apireset 710 (710.20101227094734.0000)
com.sap.mdm.tech.connector 710 (710.20101227094734.0000)
com.sap.mdm.tech.mdm4j 710 (710.20101227094734.0000)
tc/mdm/adapter/svc 710.700 (8917411)
And the following versions on the MDM Server itself:
SHARED_COMP 7.1.05.104
MDS 7.1.05.104
MDIS 7.1.05.104
MDSS 7.1.05.106
MDLS 7.1.05.99
All the MDM adapters have the same error now:
MDM Adapter listener could not start due to:
com/sap/mdm/net/MdmSecureSocketFactory
Does anyone know what this error means?
Any help would be greatly appreciated
Lynton

Was just a version issue, the MDM java API and MDM adapter had different versions.....un-deploying and re-deploying solved the issue.
Lynton

MDM Adapter supporting PI 7.0 released with MDM 7.1

Hi,
I have imported the MDM adapter which supports PI 7.0 and is released with MDM7.1 to facilitate Syndication/Import of data from/to MDM and configured the sender channel in PI for the same to fetch the file from the outbound port of MDM server.
I observe that when file is syndicated to outbound port and is ready for PI processing, the adapter do not instantly fetch the file from outbound port even for hours but when i make a dummy change in Communication channel and again activate the same then it fetches the file and processes it in PI but after that if any other file is syndicated in the outbound port i have to again manually make a dummy change and activate it in PI and so on.
I found one Sap Note 1452509 which is relevant to this but want to know if the settings mentioned in SAP note are to be made on MDM server or PI and if there is any other setting which i have to make in channel or in MDM so that file is processed instantly/near real time manner.
I am on PI7.0
Thanks,
Amit

Hey Amit,
If you are talking about "Restart the MDM ADAPTER java component" then it will be done on PI server. MDM system does not have any java component.
This is a common error which we also faced, it happens often right after the restart of MDM server.
I have seen cases where when MDM server was restarted, we had to come to PI and restart the MDM Adapter services to make Sender MDM Adapter pick files from Ready folder.
>>if there is any other setting which i have to make in channel or in MDM
No other settings are required
Thanks
Aamir
Edited by: Aamir Suhail on Feb 7, 2011 5:44 PM

PI MDM Adapter Error - MDM port not found

We are working on an R/3 - PI - MDM scenario using the PI MDM Adapter. We are currently encountering the following errors.
In RWB - Communication Channel Monitoring
MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
In RWB - Message Monitoring
2009-09-08 15:31:22 Error Message could not be forwarded permantely to the JCA adapter. Reason: System error: MDM port not found
2009-09-08 15:31:22 Error Message could not be forwarded to the JCA adapter. Reason: Permanent error: Adapter call failed. Reason: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found
2009-09-08 15:31:22 Error Adapter Framework caught exception: System error: MDM port not found
2009-09-08 15:31:22 Error Delivering the message to the application using connection MDM_http://sap.com/xi/MDMAdapter failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found.
Is there an issue with our receiver communication channel and the MDM Access Parameters? We are using the Port code and Remote System code provided by the MDM team.
Anyone experience this same issue?

We are no longer seeing the MDM Port Not found error, but we are still seeing the UnknownServer error. Looking at RWB Message Monitoring it appears that the message is successfully sent to the MDM server, but nothing is coming into the Ready folder. Any ideas on where the message is going, and why it is not showing up in the Ready folder?
In RWB - Communication Channel Monitoring
MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
In RWB - Message Monitoring
2009-09-11 14:04:15 Information The message was successfully received by the messaging system. Protocol: XI URL: http: //XXXXXXXX/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2009-09-11 14:04:15 Information Using connection MDM_http ://sap.com/xi/MDMAdapter. Trying to put the message into the receive queue.
2009-09-11 14:04:15 Information Message successfully put into the queue.
2009-09-11 14:04:15 Information The message was successfully retrieved from the receive queue.
2009-09-11 14:04:15 Information The message status was set to DLNG.
2009-09-11 14:04:15 Information Delivering to channel: MDS_TEST_CC
2009-09-11 14:04:15 Information The message was successfully delivered to the application using connection MDM_http ://sap.com/xi/MDMAdapter.
2009-09-11 14:04:15 Information The message status was set to DLVD.
I thought the implementation of the MDM Adapter was suppose to be straightforward and simple
Edited by: Chris Williar on Sep 11, 2009 9:56 PM

Issue with Receiver MDM Adapter - Integrated Configuration

Hi Experts,
My scenario is I need to pick a file from PI Directory and push it into MDM Ready folder.
The source file structure is ~ delimiter text file and at the receiving end , I need to push the same file as it is.
At the receiving side I have used MDM Adapter.
The issue at receiving side is:
I am receiving file with .xml extension with the same content as of source file but my requirement is .txt file.
Please advise on this.
I am using SAP PI 7.31.
P.S.- I have not used FTP at the receiver side due to some other concerns.
Thanks,
Vivek Jain

Hi Amit,
Thanks for the reply.
Yes we had tested successfully via SOAP UI as well (forgot to mention that). We are getting back the expected response in SOAP UI without using any credentials. We got the same response when we tested it through OS commands from PI server.
The WS is hosted by the target system and they haven't maintained any credentials at their end. So when PI is trying to access, we don't need to provide any credentials. My question is, whether the target system should keep any credentials to send the synchronous response back to PI (java stack). We have tried that as well but since there aren't any logs, we are unable to verify whether the credentials are coming correctly.
The service interfaces are correct and PI configuration are OK. I will try the XPI inspector for logs as you have suggested.
Thanks
Justin

Error with MDM Adapter.

Similar Messages

Maybe you are looking for