Error with Database adapter

Hi All,
I am using a database adapter to write values to database.The build was successful.However when i test it in the console with the sameple input I am getting the below error.
ERROR:
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Client received SOAP Fault from server : Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. NGW_PP_DBAdapter:Write_DB_Adapter [ Write_DB_Adapter_ptt::insert(StgProductportfolioCollection) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/DB_Conn'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/DB_Conn. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception.
Can anyone help me out to fix this error.
Thanks in advance.

From the error it is clear that your composite is not able to find the DB jndi.The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/DB_Conn'.
Please follow these steps:
1) Have u created DB jndi eis/DB/DB_Conn that you are using on weblogic console.
2) After creating did you redeploy the DB adapter on weblogic console.
3) If you have done above 2 steps cross check your jndi exists in ur DB adapter or not on weblogic console.
That could only be the possible reasons for the error you are getting.
Hope this helps.
Regards,
Karan
Oracle Fusion Middleware Blog

Similar Messages

Error in Database Adapter Insert Or Update (Merge) Operation

I have a simple SOA composite which reads XML files and posts data to a database table using a database adapter. I would like to perform a merge operation but I keep getting this error in the log -
SEVERE: JCABinding=> XML2DB:WriteInvToDB [ WriteInvToDB_ptt::merge(InventoryCollection) ] Could not invoke operation 'merge' against the 'Database Adapter' due to:
BINDING.JCA-11616
DBWriteInteractionSpec Execute Failed Exception.
merge failed. Descriptor name: [WriteInvToDB.Inventory].
Caused by java.lang.NullPointerException.
Here is the complete log:
SEVERE: JCABinding=> XML2DB:WriteInvToDB [ WriteInvToDB_ptt::merge(InventoryCollection) ] Could not invoke operation 'merge' against the 'Database Adapter' due to:
BINDING.JCA-11616
DBWriteInteractionSpec Execute Failed Exception.
merge failed. Descriptor name: [WriteInvToDB.Inventory].
Caused by java.lang.NullPointerException.
Please see the logs for the full DBAdapter logging output prior to this exception.
Jan 3, 2009 10:58:06 AM oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl log
SEVERE: JCABinding=> [default/XML2DB!1.0*2008-12-23_13-27-06_078.WriteInvToDB]:merge One-way interaction failed
Jan 3, 2009 10:58:06 AM oracle.tip.mediator.serviceEngine.MediatorServiceEngine post2Mesh
SEVERE: Post 2 messah failed
oracle.fabric.common.FabricInvocationException: BINDING.JCA-12563
Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'merge' failed due to: DBWriteInteractionSpec Execute Failed Exception.
merge failed. Descriptor name: [WriteInvToDB.Inventory].
Caused by java.lang.NullPointerException.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
     at oracle.integration.platform.blocks.adapter.fw.jca.cci.EndpointInteractionException.getFabricInvocationException(EndpointInteractionException.java:74)
     at oracle.integration.platform.blocks.adapter.AdapterReference.post(AdapterReference.java:226)
     at oracle.integration.platform.blocks.mesh.AsynchronousMessageHandler.doPost(AsynchronousMessageHandler.java:153)
     at oracle.integration.platform.blocks.mesh.MessageRouter.post(MessageRouter.java:152)
     at oracle.integration.platform.blocks.mesh.MeshImpl.post(MeshImpl.java:159)
     at sun.reflect.GeneratedMethodAccessor253.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
Caused by: BINDING.JCA-12563
Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'merge' failed due to: DBWriteInteractionSpec Execute Failed Exception.
merge failed. Descriptor name: [WriteInvToDB.Inventory].
Caused by java.lang.NullPointerException.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
     at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.executeJcaInteraction(JCAInteractionInvoker.java:428)
     at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.invokeJcaReference(JCAInteractionInvoker.java:509)
     at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.invokeAsyncJcaReference(JCAInteractionInvoker.java:493)
     at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAEndpointInteraction.performAsynchronousInteraction(JCAEndpointInteraction.java:429)
     at oracle.integration.platform.blocks.adapter.AdapterReference.post(AdapterReference.java:193)
     ... 49 more
Caused by: BINDING.JCA-11616
DBWriteInteractionSpec Execute Failed Exception.
merge failed. Descriptor name: [WriteInvToDB.Inventory].
Caused by java.lang.NullPointerException.
Please see the logs for the full DBAdapter logging output prior to this exception.
     at oracle.tip.adapter.db.exceptions.DBResourceException.createEISException(DBResourceException.java:488)
     at oracle.tip.adapter.db.exceptions.DBResourceException.outboundWriteException(DBResourceException.java:529)
     at oracle.tip.adapter.db.transaction.DBTransaction.commit(DBTransaction.java:287)
     at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.executeJcaInteraction(JCAInteractionInvoker.java:311)
     ... 53 more
Caused by: java.lang.NullPointerException
     at oracle.toplink.descriptors.DescriptorQueryManager.putCachedUpdateCalls(DescriptorQueryManager.java:1605)
     at oracle.toplink.internal.queryframework.ExpressionQueryMechanism.prepareUpdateObject(ExpressionQueryMechanism.java:1608)
     at oracle.toplink.internal.queryframework.StatementQueryMechanism.updateObject(StatementQueryMechanism.java:405)
     at oracle.toplink.internal.queryframework.DatabaseQueryMechanism.updateObjectForWriteWithChangeSet(DatabaseQueryMechanism.java:1136)
     at oracle.toplink.queryframework.UpdateObjectQuery.executeCommitWithChangeSet(UpdateObjectQuery.java:69)
     at oracle.toplink.internal.queryframework.DatabaseQueryMechanism.executeWriteWithChangeSet(DatabaseQueryMechanism.java:279)
     at oracle.toplink.queryframework.WriteObjectQuery.executeDatabaseQuery(WriteObjectQuery.java:47)
Jan 3, 2009 10:58:06 AM oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl log
WARNING: JCABinding=> ReadXML ReadXMLonReject: The resource adapter 'File Adapter' requested handling of a malformed inbound message. However, the following Service property has not been defined: 'rejectedMessageHandlers'. Please define it and redeploy the module. Will use the default Rejection Directory file://jca\ReadXML\rejectedMessages for now.
Jan 3, 2009 10:58:06 AM oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl log
WARNING: JCABinding=> ReadXML ReadXMLonReject: Sending invalid inbound message to Exception Handler:
Jan 3, 2009 10:58:06 AM oracle.tip.mediator.common.error.ErrorMessageEnqueuer$EnqueuerThread run
SEVERE: Failed to enqueue error message
javax.jms.TransactionInProgressException: Cannot call commit on a XA capable JMS session.
     at oracle.j2ee.ra.jms.generic.RAUtils.make(RAUtils.java:595)
     at oracle.j2ee.ra.jms.generic.RAUtils.toTransactionInProgressException(RAUtils.java:846)
     at oracle.j2ee.ra.jms.generic.RAUtils.toTransactionInProgressException(RAUtils.java:840)
     at oracle.j2ee.ra.jms.generic.SessionWrapper.commit(SessionWrapper.java:197)
     at oracle.tip.mediator.common.error.ErrorMessageEnqueuer$EnqueuerThread.run(ErrorMessageEnqueuer.java:187)
     at java.lang.Thread.run(Thread.java:595)
Any help is greatly appreciated.
The INSERT operation works fine with the database adapter, but I cannot get MERGE and UPDATE operations to work as expected!
Thanks.

hi Sudeep,
We are at first hand struggling with DB adapter problem getting down everytime. Don't know the reason why.
DB adapter is in down state and when trying to make it up gives below error:
"weblogic.application.ModuleException: weblogic.connector.exception.RAException: Jndi Name is null or empty."
I just created a simple sync process using DB adapter (custom select) and deplyed successfully. I hope jndi name is not to be configured in weblogic-ra.xml file.
This is the first time we are using this JNDI name (eis/DB/calvindb).
Any inputs will be appreciated.
Thanks,
Nikhil

Problem with database adapter on plsql procedure with in/out parameters

running BPEL 10.1.3.1 and using the database adapter on a plsql procedure with in/out parameters I get errors
the plsql procedure:
create or replace procedure proc_with_clob_inout_parameter(
p_string in varchar2,
p_clob in out clob)
is
begin
p_clob := p_string;
end proc_with_clob_inout_parameter;
In BPEL I call this procedure. When I only assign a value to the p_string parameters (in a BPEL assign) all is well. When I also assign a value to the p_clob parameter the error occurs:
<part name="summary">
<summary>
file:/ora1/app/oracle/as101.3/bpel/domains/digitaaldossier/tmp/.bpel_janb_inout_1.0_f6908ccf864581b7265c362444e88075.tmp/twee.wsdl
[ twee_ptt::twee(InputParameters,OutputParameters) ] - WSIF JCA Execute of
operation 'twee' failed due to: Error while trying to prepare and execute
an API.
An error occurred while preparing and executing the
JANB.PROC_WITH_CLOB_PARAMETER2 API. Cause: java.sql.SQLException: Parameter
Type Conflict [Caused by: Parameter Type Conflict]
; nested exception is:
ORABPEL-11811
Error while trying to prepare and execute an API.
An error occurred while preparing and executing the
JANB.PROC_WITH_CLOB_INOUT_PARAMETER API. Cause: java.sql.SQLException: Parameter
Type Conflict [Caused by: Parameter Type Conflict]
Check to ensure that the API is defined in the database and that the
parameters match the signature of the API. Contact oracle support if error
is not fixable.
</summary>
</part>
In BPEL 10.1.2.0 this isn't a problem. I tested it against a 10.2.0.1 and a 10.2.0.2 database and in both situations I get the error with BPEL 10.1.3.1 and no error with BPEL 10.1.2.0
it appears to be a problem in the database adapter...
anyone with the same problems and/or a solution?

Not of any use to you, but we had exactly the same problem on Friday when we applied AS 10.1.2.2 Patchset on top of BPEL 10.1.2.0.2.
The clob in our pl/sql proc wan't declared as in/out but for some reasons JDeveloper had created a clob on the Output Parameter type in the db partner link xsd. I removed this and it worked. This code had been untouched , and working fine, for months.
I'll be raising an SR today.
Rob J

BPEL: invalid namespace error with DB adapter polling and java embedding

Hello
I'm using bpel 10.1.3.1.0, and I'm experiencing the following problem: I'm am not able to use the SetTitle() function in a process which polls for records using the db adapter.
Steps to reproduce the problem:
- I create a very simple bpel process which poll for records in a table.
- I deploy it, write manually a record in the polled table and the process start.
- I can see the record picked up through the visual flow in the console
- everything looks ok and the process ends correctly
- now I add a java embedding activities just after the receive
- I set the instance title like this: setTitle("Go");
- redeploy, write a record in the polled table and the process start.
- but the process ends in error with the following message "XMLDOMException has been thrown. invalid namespace for prefix xmlns"
And there is no way to make it work. Consider:
If I put the same java embedding activity in another process, for example a simple asynchronous process which just copy the input to the output, and I run from the console, the instance title is set as I want ("Go")
If I remove the three lines from the polling process
<bpelx:exec name="Java_Embedding_1" language="java" version="1.3">
<![CDATA[setTitle("Go");]]>
</bpelx:exec>
then the process is executed correctly again. I add them again and then namespace error.
Whatever statement I put in the java embedding activity (for example a string concatenation or even just a comment I have the same result: invalid namespace for prefix xmlns.
Does anybody has a suggestion to evercome the problem? I need to set the title because its a mess to find out which instance processed a specific record.
Thanks by
Paolo

I made a lot of further tests, and I can say the problem is related only to the database adapter polling mechanism.
If I create an asynchronous process, with any kind of database activity (for example select) I can set the title normally.
If I create a process which start with database table polling, then I cannot use the java embedding.
try this:
- create BPEL empty project
- drop a database adapter service and follow the wizard:
- select a connection (I tried both oracle or sqlserver connection)
- select "poll for new or changed record"
- select any table empty or with few record inside (1 or 2)
- press next 4 times
- chose delete record after read (press next)
- chose order by "no ordering" in polling options (press next 2 times)
- now drop a receive activity on the process, and connect with the polling partner link
- drop a java embedding and write any valid java statement
- deploy; if the table is empty, write a recod in the table
- the process is instantiated, but the it fails in the --> receive <-- activity with "invalid namespace" error

Connection Reset Error with Database Polling

Hi,
I am using DB adapter for polling records from the database. After polling I am doing physical delete for the records that have been polled. The polled record has a column for scheduledDateTime which is used to do scheduling for the process, using a Wait Activity.
Everything works fine in development environment but shows different behaviour in testing environment.
The records have been polled and is waiting at wait activity for time expiry. But even after time expires, the process is still in a waiting stage. When I checked logs for the process, this was the error given.
<2010-04-20 07:59:00,477> <WARN> <ukbss.collaxa.cube.activation> <Database Adapter::Inbound>
ORABPEL-11624
DBActivationSpec Polling Exception.
Query name: [ScheduleDBPoll], Descriptor name: [ScheduleDBPoll.ScheduleInformation]. Polling the database for events failed on this iteration. [Caused by: Io exception: Connection reset]
If the cause is something like a database being down successful polling will resume once conditions change. Caused by Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.4.0) (Build 080602)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: Io exception: Connection resetError Code: 17002
Call:DELETE FROM SCHEDULE_INFORMATION WHERE (SCHEDULE_ID = ?)
     bind => [584]
Query:DeleteObjectQuery(<ScheduleInformation 584 />).
     at oracle.tip.adapter.db.exceptions.DBResourceException.createEISException(DBResourceException.java:461)
     at oracle.tip.adapter.db.exceptions.DBResourceException.inboundReadException(DBResourceException.java:376)
     at oracle.tip.adapter.db.InboundWork.handleException(InboundWork.java:697)
     at oracle.tip.adapter.db.InboundWork.runOnce(InboundWork.java:635)
     at oracle.tip.adapter.db.InboundWork.run(InboundWork.java:475)
     at oracle.tip.adapter.db.inbound.InboundWorkWrapper.run(InboundWorkWrapper.java:43)
     at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
     at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:280)
     at java.lang.Thread.run(Thread.java:595)
Caused by: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.4.0) (Build 080602)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: Io exception: Connection resetError Code: 17002
Call:DELETE FROM SCHEDULE_INFORMATION WHERE (SCHEDULE_ID = ?)
     bind => [584]
Query:DeleteObjectQuery(<ScheduleInformation 584 />)
     at oracle.toplink.exceptions.DatabaseException.sqlException(DatabaseException.java:282)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:669)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeNoSelect(DatabaseAccessor.java:721)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:501)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:441)
     at oracle.toplink.publicinterface.Session.executeCall(Session.java:728)
     at oracle.toplink.internal.sessions.IsolatedClientSession.executeCall(IsolatedClientSession.java:115)
     at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:117)
     at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:103)
     at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.deleteObject(DatasourceCallQueryMechanism.java:94)
     at oracle.toplink.internal.queryframework.StatementQueryMechanism.deleteObject(StatementQueryMechanism.java:96)
     at oracle.toplink.queryframework.DeleteObjectQuery.executeDatabaseQuery(DeleteObjectQuery.java:143)
     at oracle.toplink.queryframework.DatabaseQuery.execute(DatabaseQuery.java:620)
     at oracle.toplink.publicinterface.Session.internalExecuteQuery(Session.java:2089)
     at oracle.toplink.publicinterface.Session.executeQuery(Session.java:993)
     at oracle.toplink.publicinterface.Session.executeQuery(Session.java:950)
     at oracle.tip.adapter.db.inbound.DeletePollingStrategy.destroyRecord(DeletePollingStrategy.java:332)
     at oracle.tip.adapter.db.inbound.DestructivePollingStrategy.destroy(DestructivePollingStrategy.java:406)
     at oracle.tip.adapter.db.inbound.DeletePollingStrategy.destroy(DeletePollingStrategy.java:378)
     at oracle.tip.adapter.db.InboundWork.transactionalUnit(InboundWork.java:1353)
     at oracle.tip.adapter.db.InboundWork.runOnce(InboundWork.java:575)
     ... 5 more
Caused by: java.sql.SQLException: Io exception: Connection reset
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:175)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:287)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:649)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1161)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3001)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3074)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:662)
     ... 24 more
<2010-04-20 07:59:05,673> <INFO> <ukbss.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.exceptions.DBResourceException createEISException> A retriable exception occured. In BPEL you can configure a fault policy (starting with 10.1.3.3) to automatically perform retries. Please configure bpel/domains/<domainName>config/fault-bindings.xml
I thought the error is due to database connection, but as per DB team, the database is up and this error happens for some records and some records are successfully executed.
I am using Oracle SOA 10.1.3.4.0 and Jdeveloper 10.1.3.4
Any help will be appreciated.
Regards,
Varun

Nevermind, I found the problem. My school is incapable of finishing loading any sites through SSL, ever (without a proxy), and Twitter decided to lock my account to SSL without telling me. I just had to set FoxyProxy to use the proxy for https://twitter.com and it was fixed.
I suppose other programs could still load Twitter because they didn't have the cookies to stay in my account, which means they weren't redirected to https.

JCA Binding error with FTP Adapter on put operation

Hi
I am facing a problem with put operation with ftp adapter. my soa service will get file from the 1st ftp server (Unix) as attachment and is putting the file on another ftp serve(Unix)r. the put operation is failing with the below error:-
Non Recoverable System Fault :
<bpelFault><faultType>0</faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: Error sending file to FTP Server. Error sending file to FTP Server. Unable to send file to server. Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary></part><part name="detail"><detail>Unexpected termination: Socket closed</detail></part><part name="code"><code>null</code></part></remoteFault></bpelFault>
this is a SFTP server and the corressponding property is set to true on the configuration. I had also recreated the jndi again & also increased the max connections to 700, but still facing the same issue. Also i am able to ftp the files to this location through filezilla. Also i continously getting the below errors in soa_server1.out:-
<Jul 24, 2012 7:25:11 AM CDT> <Error> <oracle.soa.bpel.engine> <BEA-000000> <Unhandled exception for ComponentDN=default/NShoreAccrualConcService!1.0*soa_9113be23-2e93-4e54-9987-2e8ae5a4b2e6/ProcessNShoreAccurals CompositeInstanceId=330020 ComponentInstanceId=330018>
<Jul 24, 2012 7:25:11 AM CDT> <Error> <oracle.soa.bpel.engine> <BEA-000000> <This exception occurred because the fault thrown in the BPEL flow was not handled by any fault handlers and reached the top-level scope. Root cause :
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}remoteFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{
summary=<summary>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: Error sending file to FTP Server.
Error sending file to FTP Server.
Unable to send file to server.
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</summary>
,detail=<detail>Unexpected termination: Socket closed</detail>
,code=<code>null</code>}
     at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:338)
     at com.collaxa.cube.engine.ext.common.InvokeHandler.__invoke(InvokeHandler.java:1059)
     at com.collaxa.cube.engine.ext.common.InvokeHandler.handleNormalInvoke(InvokeHandler.java:586)
     at com.collaxa.cube.engine.ext.common.InvokeHandler.handle(InvokeHandler.java:130)
     at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:74)
     at com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform(BaseBPELActivityWMP.java:158)
     at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:2543)
     at com.collaxa.cube.engine.CubeEngine._handleWorkItem(CubeEngine.java:1165)
     at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1071)
     at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:73)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:220)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:328)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4430)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4361)
     at com.collaxa.cube.engine.CubeEngine._createAndInvoke(CubeEngine.java:698)
     at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:555)
     at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:673)
     at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:293)
     at sun.reflect.GeneratedMethodAccessor1687.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:94)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor.runJaasMode(JpsAbsInterceptor.java:81)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:112)
     at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:105)
     at sun.reflect.GeneratedMethodAccessor1119.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
     at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy277.handleInvoke(Unknown Source)
     at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.__WL_invoke(Unknown Source)
     at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:39)
     at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.handleInvoke(Unknown Source)
     at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:35)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:140)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatchTask.java:88)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:64)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:662)
>
<Jul 24, 2012 7:25:11 AM CDT> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-000000> <failed to handle message
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}remoteFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{
summary=<summary>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: Error sending file to FTP Server.
Error sending file to FTP Server.
Unable to send file to server.
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</summary>

Error itself indicates the potential issues -
Please ensure
1. Specified remote output Dir has write permission
2. Output filename has not exceeded the max chararters allowed by the OS and
3. Remote File System has enough spaceRegards,
Anuj

Oracle SOA Suite 10.1.3.4 Polling database table with Database Adapter

We are trying to use the database adapter to poll for new and changed data in a database. To do that we try to use a sequencing table on an external database. But for that we need to specify the data-source name for the external sequencing table. Where do we need to define this data-source? We have tried with data-source defined in the Enterprise Manager, but it's not right. Also tried with the name of database connection in JDeveloper, still not working.
Any ideas?

Hi,
If you are trying to understand how to create a connection pool for a data source, then this document might be helpful
http://blogs.oracle.com/fusionmiddlewarereallife/soa_11g_bpel_composite_and_database_adapter.html

Reading MS Access Database file with database adapter in soa

I have an .MDB file on another machine that i want to read from within SOA composite using database adapter. can i do that ? how ?

Have you checked out the jdbc-odbc bridge from Sun? I would think you should be able to create a jdbc connection to Microsoft Access. With that connection, you would then be able to create a jndi entry on the DB adapter from SOA. I haven't used this before, so I'm not sure how well, or even if it would work.

Handling of Connection error with database

hi, my application is using oracle 9i as database (connection via jdbc).
I understand that we can capture the exact connection errors to database, in event that the database is down or not available. This will allow a more meaningful errors message to be thrown, like "Database is not available" when the user try to login to the system. Is that a particular sql exception that i can catch for such connection errors? or if there is not, what is the best practise for handlng such situation?

Yes, java.sql.SQLException is designed for that. It has two methods, getSQLState and getErrorCode, that will help you get the state of the RDBMS if something goes wrong. - MOD

Intermittence for execute Polling with DataBase Adapter in OSB11g

Hello Guys,
I'm having a problem running the polling DataBase Adapter OSB11g. The creation of the adapter was made in Jdeveloper 11.
The problem is:
Intermittence to run the polling DataBase. Sometimes it works, other time it does not work.
Displays the following exception:
*<Info> <JCA_FRAMEWORK_AND_ADAPTER> <BEA-000000> <<oracle.tip.adapter.db.InboundWork handleException> BINDING.JCA-11624*
DBActivationSpec Polling Exception.
*Query name: [BD_XPTO_NOTIFICA_XPTOSelect], Descriptor name: [BD_XPTO_NOTIFICA_PRICING.XPTO]. Polling the database for events failed on this iteration.*
Caused by JTS transaction was marked rollback only.
This exception is considered retriable, likely due to a communication failure. Polling will be attempted again next polling interval.
This is a BUG? Have Fix?
Tks,
Azevedo, Artur.

It looks like a database issue or a XA configuration issue? What database you're polling? Oracle? Sybase? Check if your database is supported...
Cheers,
Vlad

Polling table with Database Adapter

Hi All,
I have created a Database Adapter to poll the table for the new record or modified.
I have added a receive activity to that Adapter and deployed.
However the instance is not completing and its in always running state and waiting at receive activity.
Can you please help me out
Thanks

hello,
i have to do database polling..this is wat i have done.but instance is not getting created in BPEL..
i have created a sequence in databse.
i have created a source table in database which has three colums id,name,sequence.(generated by doin seq.nextval)
i have created a table as seqhelper table which has two fields table_name and seqid.
now i hav dragged a db adapter.I hav chosen poll,update seq table..and given my seq table name,seqname filed as table_name,seqvalue field as seqid.and sequence fiels ad sequence column of source table ...and done polling frequency as 5 seconds.
now created a bpel process,chosen interface as based on wsdl and selected db adapters wsdl file and linked to bpel after removing the default exposed service of bpel..so bpel as one receive activity joined to db adapter...
WHEN<
i am inserting any new records to source table....instance is not getting created...please help..

Can we access the e-business apps schema with database adapter

Hi..
can we access the tables/views/api's in apps schema using database adapter. Generally we access it using oracle apps adapter.
Thank you,
Dan.

Hi Dan,
As mentioned by the other user, you can very well use the db adapter as APPS Schema user to connect to any APPS instance.
This is the reason why you have the connection navigator in JDev not differentiating much for APPS adapter connection and db connection listed.
However, having said that I would still prefer using APPS JCA Adapter for APPS instance and DB adapter for databases.
Regards
A

Compatibility of PostgreSQL database with Database Adapter OSB 10.3.1

Hello,
I'm having problems configuring a Database Adapter for a PostgreSQL database in OSB 10.3.1. Someone knows if this adapter supports PostgreSQL databases?
Thank you,
Regards
Héctor

I doubt. Drivers/DB support is at http://download.oracle.com/docs/cd/E11036_01/integrate.1013/b28994/adptr_db.htm#BDCIIDAE
Manoj
Edited by: mneelapu on Aug 18, 2009 4:18 PM

Error Invoking Database Adapter

I am trying to create a simple bpel process which updates table in Oracle Database, but getting some JCA connection issue below:
"<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. Project1:writeDB [ writeDB_ptt::insert(ContactOutputCollection) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/XE_DB'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/XE_DB. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary></part><part name="detail"><detail>JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/XE_DB'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/XE_DB. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server </detail></part><part name="code"><code>12510</code></part></bindingFault></bpelFault>"
thanks

Hi
Checklist
1) Create DataSource
2) Connection Pool in the DB Adapter(with jndi eis/DB/XE_DB)
Edit the default connection pool created and point the xaDataSource or Datasource to jndi of datasource created in step1
Regards,
Ajay

Error with mail adapter

Hi,
I have an idoc to email scenario.
The email is to be triggered, in case of an error in one of the idoc field values.
The email, is being triggered successfully as seen in sxi_monitor. But, the receiver mail adapter is failing(as seen in adapter monitoring).
The error as seen in adapter monitoring:
<b>error occured: [2006-10-03T12:34:02Z] unable to call the mailer; com.sap.aii.messaging.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.io.IOException: server not responding OK to MAIL FROM; 501 5.5.4 Invalid Address</b>
This is not an issue with the address specified, because, there are other interfaces which are using the same adapter to send mails successfully.
MDT(Messaging system) specifies error as GENERAL_ERROR.
Any hints?
Thanks,
Smitha.

Hi,
>>> MDT(Messaging System), the error is specified as GENERAL_ERROR.
then maybe you need to ask some General about it?
or at least a Colonel? ))
but frankly saying there must be a difference
it it works in once case and doesn't in the
other don't you agree? so all you need to do
it is to find it
Regards,
michal

Error with Database adapter

Similar Messages

Maybe you are looking for