Error with SoftKey on Phone 7960G

Hello,
we have a Problem with Softkeys on a 7960G Phone.
The following example works on a 7941G without Problems, but on a 7940G or 7960G I only receive XML Parse Error
=========================
<CiscoIPPhoneMenu>
<Title>Titel</Title>
<Prompt>Prompt</Prompt>
<MenuItem>
<Name>this is a menu item</Name>
<URL>url1</URL>
</MenuItem>
<SoftKeyItem>
<Name>exit</Name>
<Position>1</Position>
<URL>SoftKey:Exit</URL>
</SoftKeyItem>
<SoftKeyItem>
<Name>select</Name>
<Position>3</Position>
<URL>SoftKey:Select</URL>
</SoftKeyItem>
</CiscoIPPhoneMenu>
=========================
What can be the Problem?
Firmware:
7960G: SIP P0S3-08-8-00
7941G: SIP41.8-3-3SR2S

hello i have lookd over my files again and again, but I could not see anny problem. we are doing normaly more programming with the 79x0 phones (phonebooks, forwards, etc.) but the softkey feature seems verry tricky.
I will load up my file in this post, and if someone hase these softkey thing running, it would be nice if he can share these....
thanks for help
andreas koch

Similar Messages

  • Sync errors with Windows 8 phones.

    Has anyone been having issues with syncing Windows 8 devices? We have about 50 HTC 8X phones and around 10% of them are having sporadic sync errors. We also have some of the Nokia WP8 devices that exhibit the same issues. While the WP8 device is problematic, we can have an Android or iOS device working next to it just fine. The error on the device is 85002012. Would be interested to see if this is consistent among users of GMS2, or is there something wrong with us. I did open an SR with support and I can report back any findings from there.

    In article <[email protected]>, Stevecim wrote:
    > Don't think its a cert issue...
    We can't rule it out and the Window8 systems have demonstrated
    themselves to be particularly picky about certs. It could well be that
    something else happened to change in the same time you upgraded that is
    confusing the issue (always frustrating when that happens). Check your
    certs to be sure is how we rule them out and the Heartbleed issue has
    brought lots of such tools out. One I've been using that may help you
    is
    https://sslanalyzer.comodoca.com/
    Are you actually using the same cert you were running before? Just in
    case the upgrade replaced your cert.
    Andy of
    KonecnyConsulting.ca in Toronto
    Knowledge Partner
    http://forums.novell.com/member.php/75037-konecnya
    If you find a post helpful and are logged in the Web interface, please
    show your appreciation by clicking on the star below. Thanks!

  • I cannot connect to my verizon and *611 saying ERROR with all 3 phones I have.

    my verizon on PC, my verizon on my phones and *611 don't work.  All of my phones are prepaid. 

    it works now. 

  • Phone Designer compatibilty with 9.x phone firmware

    Hi all,
    There have been several posts in the past surrounding errors in Phone Designer, but I wanted to see if I could get confirmation.  I'm running a two node UCM 8.6.2.21900-5 cluster.  I was getting new reports of the usual "unknown error with your IP Phone" problem from end users when trying to apply background images to their phones, and finally got some time to troubleshoot.
    I'm testing this from a Windows 7 x64 laptop, running Phone Designer 7.1(3) SR2.  I'm using the .NET commands found in this thread to get around the 32-bit limitation of the software:  https://supportforums.cisco.com/thread/2030926
    With a 7965 phone running the latest SCCP firmware, 9.3(1), Phone Designer errors out.  I've confirmed the usual suspects aren't the issue (personalization, web access, etc.).  Reading through some other threads, downgrading the phone firmware was a suggestion with a decent success rate.  I loaded 8.5(4), and Phone Designer works without issue; loaded 9.3(1) again, and Phone Designer is broken.
    I suppose my question is, is this a known limitation with all the 9.x firmware releases?  Or is something else at play here?
    Hopefully I didn't miss the answer in another thread.
    Thanks for the help!

    Scott,
    I have a TAC case opened and got a respones that phone designer is not compatible with CM 8.5 and above. That doesn't make sense as we are at 8.6 and it had been working with the 9-2 firmware. I have pushed back to TAC and await a response. This is the doc they referenced.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cupa/phone_designer/7.1/engli
    sh/release/PDReleaseNote71.html#wp42101
    Server/Network
    Cisco Unified Communications Manager Release 6.0 or later1
    Note Cisco Unified Communications Manager Release 8.5 or later is not supported.
    •The  Cisco Unified Communications Manager server must be installed,  configured, and operating correctly as described in the Cisco Unified  Communications Manager documentation, at the following URL:
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html
    •The Cisco Unified Communications Manager server must be configured to support the Phone Designer application.

  • Error with Loading Device Software on 8700 AT&T phone.

    Hi. I would like some help with my 8700 AT&T refurb blackberry phone.  When I tried to download the device software (v4.5) to my already downloaded DTM (v4.6), it gave me an error message I did not know what to do with.  
    I want to synch my organizer data (calendar, contacts) from older desktop (Outlook 2002) to my new laptop (Outlook 2007, Windows 7).  I am having trouble downloading the supporting device software.  I keep getting an error message that reads "Error with the Application Loader.  Cannot update software using this system as device is currently activated on a blackberry Enterprise Server or professional software.  Contact administrator or check with service provider."  I do not use Enterprise.  I don't have an internet service plan for my phone as I use it only for calendar and contacts.  AT&T gives the software option for AT&T 8700 in English device software as v4.1.0.175 as the only option that is supported by my current platform (2.0.0.90).  Is this right? 
    All I really want to update my phone with the latest software that supports Outlook 2007 on my new laptop.  What do I need to make that happen? 
    Thanks in advance.

    Hi there!
    Refurbs can be problematic. If a BB was ever activated on BES, then it has an IT Policy. IT Policies are not removed by the standard WIPE actions. Rather, they take additional steps to clean off the Policy.
    Just to check, please go to this screen:
    Homescreen > Options > Security Options > (Information) or (General Settings) or (something similar)
    On that screen will be some selection boxes plus other sections (divided by horizontal lines). If, on that screen, there is any discussion about IT Policy (even if it says "Default"), then you indeed have an IT Policy on your BB. (The screen may also have a section for "Services").
    If you don't have an IT Policy, then something else is going on...in which case, stop here and report back exactly what you found on that screen.
    If you do have an IT Policy, then, in my view, you have two choices.
    1) Since this refurb was provided to you by ATT, they did not deliver to you a "clean" device. You could take it back to them and have them clean the IT Policy off.
    2) You can remove the Policy yourself. The process is 100% destructive to the data on the BB, so you'll want to be sure you've already taken a good full backup. Then use Method 3 in this KB.
    As for what device OS to install, you have more choices than you indicated. See this page:
    https://www.blackberry.com/Downloads/browseSoftwar​e.do;jsessionid=0A15EC28AEC181D3F3F9C5235D9F166A.n​...
    Select, from the drop-down, your model (8700). The resulting screen shows that ATT is currently supporting 4.5.0.182 (MultiLanguage) for your BB model. The MultiLanguage pack will include English, so you don't have to fall all the way back to the English only version. So, you have choices. The best advice is to use the most recent version -- bug fixes, enhancements, and all of that.
    What I advise, since you want to use Outlook 2007, is to use that 4.5.0.182 package for your BB and the most recent RIM desktop package (5.0.1.28). That way, you will have full compatibility for what you are looking for.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I attempted to update my iphone5 to 7.1.1  There was an error and now my phone is erased.  I have attempted to restore from the cloud and it propogates the apple id with an old one, and will not allow me to restore from a the cloud

    I attempted to update my iphone5 to 7.1.1  There was an error and now my phone is erased.  I have attempted to restore from the cloud and it propogates the apple id with an old one, and will not allow me to restore from a the cloud

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              
    Also, do you remember what the error message said?

  • TS1814 hello i have  a trouble with my i phone... i was trying to update a new software and at the end it says that there is some error and i cannot turn my i phone bak on all it shows is itunes logo in the midlle and usb cable with an arrow pointing to t

    hello i have  a trouble with my i phone... i was trying to update a new software and at the end it says that there is some error and i cannot turn my i phone bak on all it shows is itunes logo in the midlle and usb cable with an arrow pointing at the logo. If anyone knows what it is and what i should do please get back to me as soon as possible many thanks.

    http://support.apple.com/kb/HT1808

  • Error with update my windows phone 801883f error couldn't be installed

    Dear Sir,
    Plz Solve this Issue ASAP
    error with update my windows phone 801883f error couldn't be installed 
    therefore, i can't update my windows phone
    Salim

    Hi,
    This error code means that the specified path couldn't be found.
    To fix this issue, I suggest we try following steps and try to reinstall again:
    Step 1: Clean update temp files:
    1. Press Windows key + R, type service.msc and press enter. 
     2. Stop Windows update service.
    3. Run following command lines one by one to clear update temp files:
    cd %windir%
    ren SoftwareDistribution SDTemp
    exit
    4.  Restart Windows update service.
    Step 2: Clear windows store catch:
    Press the Windows + R keys on your keyboard to open the Run dialog.
    Type WSReset.exe, and click/tap on OK.
    The Store will now open, and state the following: The cache for the store was cleared. You can now browse the store for apps
    Then, please try to update Windows 8.1 again.
    Regards,
    Kate Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I tried updating my iphone 4s to the ios 7 but it said error with the firmware now my phone is stuck in recovery mode and i have no idea how to fix it any suggestions??

    i tried updating my iphone 4s to the ios 7 but it said error with the firmware now my phone is stuck in recovery mode and i have no idea how to fix it any suggestions??

    Try Restoring it 3 times in a row and see if that works.
    If not that error can indicate one of two things: Your iPhone was at one time jailbroken, had the iOS version rolled back, or ran an unauthorized beta and if none of those things are true it is a hardware error.

  • HT201210 I am absolutely frustrated with this new phone. My old phone a 3G took a total dump and would not update, so, I bought the 4G with Siri and it will not update either. The error message is a "3014" again. I am ready to throw this thing against the

    I am absolutely frustrated with this new phone. My old phone, a 3G, took a total dump, so, I bought this new 4G with Siri and I cannot get it to update. I keep getting the same error message that I got with the 3G error "3014". I am ready to throw it against a brick wall!!

    The support document that you refrerred from explains it, however I have posted it here.
    Error 3014
    This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.

  • I forgot passcode on my iphone5 and tried to restore it through itunes on my PC. However it gave me an error message saying that that my phone could't be restored due to an unknown error. Now my phone does't turn off and it doesn't sync with itunes.

    I forgot passcode on my iphone5 and tried to restore it through itunes on my PC. However it gave me an error message saying that that my phone could't be restored due to an unknown error. Now my phone does't turn off and it doesn't sync with itunes.

    Hi there calcit08,
    Welcome to Apple Support Communities. 
    Take a look at the article linked below, it provides a lot of great information and troubleshooting suggestions that’ll resolve the issue that you’re running into restoring your iPhone 5 with iTunes on your PC.
    Resolve iOS update and restore errors in iTunes - Apple Support
    Take care,
    -Jason 

  • I purchased an audio book from I tunes but when I sync with my I phone it respond with error saying could not read or write the file. It only sync parts 2

    I purchased an audio book from I tunes but when I sync with my I phone it respond with error saying could not read or write the file. It only sync parts 2

    Those videos are probably not in an iPod-friendly format. It’s picky about that. You can try converting them, if possible.
    As for the audiobooks, are you sure they haven’t synced? You’ve enabled it to sync books and checked the “Audiobooks” section of your iPod?

  • Second s5 update has made wifi and data run simutaniously, being charged for data only way to turn off Data is to go to settings. I had same issue with my other phone. Recieved two replacement phones the SIM card did not work on replacements took phone ba

    Wifi and Data running simultaneously. Data was being charged to my account even though I was on WIFI. No one can fix the issue. I have wasted 8 hours of my life and went and returned my phone and got a new one yet after the last update I now have WIFI and Data showing that they are running simultaneously.  I have looked at numerous message boards and turned off Caller ID don't have Volte on my phone but do get an error with Visual Voice Mail. I don't want any of these services, you are not helping your customers Verizon or Samsung with forcing us to update. I tried not to update my NEW phone that I had to get from Costco because of this exact same stupid issue happen on my last one. But every time I said NO to update the next time I did anything on the phone the UPDATE would pop up again. I would say NO it would come back. I was doing a text and it came up and I hit update not wanting to and then my phone began updating on a low battery. I had to rush to put on charge and then my WIFI and Data came back on together with arrows on all going up and down. I HATE the lack of support I get from SAMSUNG and VERIZON... Verizon washes their hands and say these are not Updates even though these are the features we have on all our phones like Visual Voice Mail and Volte...

    I did look at the Settings/Cellular to check the applications.  This is one of the steps I did with the person from Verizon who was an "iPhone Specialist".  And he didn't see anything unusual.  And I can honestly tell you they have very minimal number of apps on their phones.
    When I went to the Apple Store the first time with this problem, they had me update the phones iOS systems to see if this would correct the problem.  They were each running older versions but different versions.  One son had one update to do and the other had a couple of updates needed.  So, the problem started before they were updated and they weren't even on the same update.  And nothing changed after we did the updates.
    I didn't reboot the router and modem, because I'm not having any other issues with my phone, my husband's phone, our iPad, xbox, PS3, or laptops.  Would the wifi only affect their phones?

  • I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows 8?

    I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows

    Hi, stig2013. 
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps. 
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Cheers,
    Jason H. 

  • Error with iPhone app download, now can't find or open app

    I recently tried to download an app on my iPhone 4S.  There was an error with my phone mid-download.  After a restart, the app is nowhere to be found on my phone, but I cannot re-download the app, as the app store thinks it is already on my phone.  When I go to the store to re-download, the "Open" button is present (instead of the "Download" button), but when clicked, nothing happens.  Syncing iPhone to a computer with iTunes also does not solve the problem, as the app doesn't appear in iTunes either.
    I've tried restarting, hard resets, etc. to no avail.  Suggestions? 

    When you launch iPhoto with the option key depressed you'll get this window:
    Click to view full size
    All libraries on your hard drive (and on external drives) will be listed and the currently used library will be listed as (default).
    OT

Maybe you are looking for