Errors continues.

how do i get through this ?
I just bought a express yesterday. And I tried to set it up, but the utility can not read from the base station.
here is what i have right now, cable modem, 2 RJ45 wire, Intel(R) PRO/100 VE Network card Ethernet, a RJ45 HUB, and a wireless router(linksys wap54g v.2).
i dont have a wireless card.
here is how i connected it. i let the cable line connected to the hub, then get another rj45 wire connected between the hub and the computer network card, the another rj45 wire connected between the hub and the airport express.
the i opened up the utility, it shows the airport with information, the when i click the continue buttom, it pops up error.
plz help.
here is photos with my connetion and error
http://img20.imagevenue.com/img.php?image=038490_1221068lo.jpg
http://img188.imagevenue.com/img.php?image=038541_122478lo.jpg
http://img152.imagevenue.com/img.php?image=038632_1221199lo.jpg
Message was edited by: yzc717

The Linksys WAP54G is a wireless access point. It doesn't have a built in router.
I suggest you return the WAP54G and the RJ45 hub, and buy a wireless router like the Linksys WRT54G which has a built in 4-port hub.
Then follow the advice I recently posted in the previous discussion you started in this forum on this topic.

Similar Messages

Script Error, Continue?"

When I launch Media Center Deluxe II I have this error:
Script Error, Continue?
I download the patch but the error persist. I have a windows 2000 with a FX5200 Thx a lot.

There is one solution, you can always upgrade to XP.
I know the prospect of upgrading to XP is not a pleasant one, I am in the same boat. But I don't see that I have much choice.
All I can say is, this is the LAST time I buy ANY MSI card board or other.
I ran into a similar problems with ASUS years ago and haven't bought an Asus product since. I had bought the latest Asus motherboard and the latest Asus Deluxe video card and found out they were incompatible with eachother. I never bought Asus since.
Apparently the problem with my MSI Motherboard and MSI Video Card is similar. Except this time MSI says it works with Win 2000 Pro. I buy it and find the same script error as you. My supplier won't give me a refund an I can't afford to waste money on another Video Card. I contacted Tech support and they told me that they never heard of such a problem. They further told me it should work and they have no idea how to fix it. They suggested I try reinstalling my OS.
As far as I am concerned, the problem is with thier installer. It appears to be looking for some video or multimedia function that is only available in XP.
If MSI wants to regain my trust, they better provide me with a simple interface to get this remote working or provide me with a FREE replacement product that supports all the features of my card. Otherwise they will lose my business for good. I don't like companies who lie to sell products.
I am a supplier of MSI and other products and sell about 500 MSI products a month in each of my locations. It would be a real shame if I dumped MSI components altogether.
:O

Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

This is a user to user forum. Apple isn't here and won't answer you. You need to contact Apple directly. You can use the Contact button at the bottom of the screen.

In my ipad, I m getting playback error continuously on YouTube

getting playback error continuously in YouTube in my ipad

First try a reset. Press and hold both the home and power buttons 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own.
If it still doesn't work try deleting and reinstalling the YouTube app.
If it still doesn't work contact youTube to see if they can help.

I am unable to empty my trash w/o getting an 8003 error.Some of what is in the trash is BackUp from Time Machine. I have tried to Secure Empty and also Unlocking folders yet the error continues. There is over 300gb that I need to trash. MacPro 10.6.8

I am unable to empty my trash w/o getting an 8003 error.Some of what is in the trash is BackUp from Time Machine. I have tried to Secure Empty and also Unlocking folders yet the error continues. There is over 300gb that I need to trash. MacPro 10.6.8

See #E6 in Time Machine - Troubleshooting.

Error message 7 and 6034. Have uninstalled and reinstalled iTunes 7 times and errors continue. Can someone help please? Been working on this for 4 hours.

Itunes updated on my pc and laptop and now I cannot open the program on either one. Running Windows 7 on both. Error number 7 and R6034 continue to pop up. I have uninstalled (6 times) all of the Apple programs, rebooted, reinstalled, etc. as badgerfan1101 posted but cannot open it on either computer. I even did a restore to an earlier date with hopes that would solve the problem. Any other ideas? Been working on this for 4 hours

Hey gardenqueen1,
When you uninstalled and reinstalled iTunes, did you use this article?
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
If you haven't already done these steps, this section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Sincerely,
Delgadoh

Get-ACL Error Continuation and Server List

Hi All,
I'm conducting an audit of all folders on network shares that are spread accross several servers. I'm very new to PS but from my research I have put together the following:
Get-ChildItem \\server\share -Recurse | Where-Object{($_.psiscontainer)} | Get-Acl | select-object path -expandproperty access | Export-CSV results.csv
This has been working ok but I hit an 'unauthrosied operation' error when it trys a folder that I do not have permissions to (i'm running as domain admin). That's fine but it's a termination error which I can't seem to work around. I have tried
things like -ErrorAction SilentlyContinue but it just stops without producing the error and will not continue. I have also tried a try and catch which I found on Technet but can't seem to get the -recurse to work:
$fse = Get-ChildItem \\server\share -recurse | Where-Object{($_.psiscontainer)}
$fse | %{$f=$_; try { get-acl $_.FullName } catch { Write-Warning "Failed to access $($f.FullName)" }}
I've tried my best to get the code to continue after the error but I just can't see what I am doing wrong. Any ideas?
Also, I have many many shares to test which are all listed in a spreadsheet. I'm been trying to research how I can use this spreadsheet instead of writing in the server and share for every one I want to test. However this is now going way above
my head and I can't get anywhere near to a semi-working example. Is there a way I can use the above to reference a spreadsheet and test each share that is listed?
Many Thanks.

OK I have got it to run by using
try
Import-csv .\test.csv | % {Get-ChildItem $_.Servername -Recurse -ErrorAction Stop| Where-Object{($_.psiscontainer)} |
Get-Acl | select-object path -expandproperty access | Export-CSV results.csv }
}Catch{
$_.Exception
continue;
However it still terminates when it gets to a folder it does not have the permission to access the ACL.
I'd add a separate ForEach-Object call for each object returned from Get-ChildItem. Does this work?
Import-Csv .\test.csv | ForEach-Object {
Get-ChildItem $_.Servername -Recurse | Where-Object { $_.PSIsContainer } | ForEach-Object {
try {
$Path = $_.FullName
$_ | Get-Acl | Select-Object Path -ExpandProperty Access
catch {
# You can ignore this, write a warning, send this to a separate file, etc
Write-Error ("Error calling Get-Acl on '{0}': {1}" -f $Path, $_.Exception.Message)
} | Export-Csv results.csv
That will simply write any errors to the screen. Is that good enough, or did you want to store them somewhere?

LG Spectrum "LG Keyboard has Stopped Unexpectedly" Error Continuously!!

I have an LG Spectrum and when I try to type on the keyboard when the phone is in horizontal position I keep getting the "LG Keyboard has Stopped Unexpectedly" error message. It happens constantly!! It will sometimes let me continue to type, but I can't see the letters unless I turn the phone back to vertical position. This is VERY ANNOYING. Does anyone know how to fix the problem? I have checked for software updates and my phone says it is up-to-date.

Try switching to Swype. Just long-press in an input area, and select Input Method, and choose Swype. Use that for a bit and see if you should use that longer term.
If not, download 1Tap Cache Cleaner, and clear the caches. Shutdown. Pull your battery. Wait 2 minutes. Put your battery back in. Boot up, and long-press an input area and change back from Swype to LG Keyboard and see if that fixes things for ya.
If it doesn't, then you might try downloading Gingerbread Keyboard and selecting that as Input Method. There are others in the market.
I have not had a problem using the LG Keyboard on my Spectrum in either orientation, but I mostly use Swype now as it is so much better than the default keyboard...

I have error facing an error continuously on photoshop - Adobe Photoshop cc 2014 has stopped working.how can i resolve it?

how can i resolve it?

Maybe you could tell us what you already have tried and when this error shows up.
Besides that message, do you get any other information about the crash in your screen?
I guess you're on Windows, don't believe that Apple computers show this type of error message.
Running as administrator, or other compatibility settings could solve your problem.

"Unable to Connect" error continually shows up despite having reinstalled firefox and troubleshooting. How do I get firefox to work properly again? (windows 7)

I turned on my computer and before I could start firefox it said it was updating. When it said it had finished updating and there were no error messages indicating that the update had failed. When I opened firefox it pulled up the last tabs I had open before closing the program. None of the tabs functioned properly and gave me "unable to connect" errors even when I opened new tabs, no matter what the website was. Everything worked properly in internet explorer. I tried restarting my computer and firefox, troubleshooting, restoring firefox, uninstalling and then reinstalling firefox, checking my firewall and the problem persists. I've tried changing my proxy settings according the articles on the support page but nothing has worked. How should I fix this? Firefox is my favorite browser I would hate to give it up.

see: [[Fix problems connecting to websites after updating Firefox|Fix problems connecting to websites after updating Firefox]]
Also possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
https://support.mozilla.org/kb/Server+not+found
https://support.mozilla.org/kb/Firewalls

Serious error continues

I'm having the same old problem a serious error has occurred .... upon opening my premire element 9 on my macbook pro osi-maverick
I tried added the patch update 9.0 but can't open it because I told I can only open this if it comes from apple store
how do I resolve this

sweetboo5
Thanks for the reply.
When you uninstall Premiere Elements 9.0 to which the 9.0.1 Update has been applied, both are uninstalled. So, at reinstallation, first Premiere Elements 9 gets reinstalled and, when that is successful, then you reinstall the 9.0.1 Update.
Here are the check list for the basics for a working program. In just case, please review the list to make sure you have ruled each in or out of the problem situation you are now facing
1. Working from 9.0.1 Update and are do you have the latest version of QuickTIme installed on your computer with Premiere Elements?
2. Program works with or with the antivirus program disabled?
3. Installed and are running program from User Account with Administrative Privileges and also Run As Administrator applied via desktop icon?
4. Video card/graphics card driver is up to date according to the web site of the manufacturer of the card?
5. Delete the Adobe Premiere Elements Prefs file (also known as the settings file). That should be found Users/User name/Library/Application Support/Adobe/Premiere Elements/number of version. In the folder which has the version number as its name should be the Adobe Premiere Elements Prefs file that you delete.
6. Scratch Disks reviews.
http://help.adobe.com/en_US/premiereelements/using/WS887BC37E-7FDA-42c7-A513-FA3515F267E7. html#WSDC16DBC8-0046-4725-A15D-0A80EC111B07
As it relates to Premiere Elements 9.0/9.0.1 Mac.
The spontaneous fix of the previous episode of this issue makes me wonder if some computer updates may be factoring into this. What programs do you have automatically updating at this time?
Please review and consider and then we can decide what next. Since I am not an Elements Mac user, I am hoping to find common ground between the Windows and Mac programs to find the problem and resolve it.
ATR

Unable to purchase from Itunes as credit card processing error continues to come up

Is anyone having problems purchasing from Itunes today? I was able to easily yesterday but unable to from my Mac, from my PC or from my iPad.

You're right about the lack of support for Itunes. They say they will answer emails with support questions but its been over a week and I have yet to get a response. I was able to download a movie last night and thought the problem was resolved but am getting the same error message again today. You'd think Apple might want to resolve this as it as I am trying to spend money at the Itunes Store. The message tells me to contact Itunes -- have tried every way possible to do that and no response!

IMovie -108 Error CONTINUOUSLY

Video refer to the Situation: http://youtu.be/KXyGUeVz9wE
I'm having -108 error on my iMovie when I try to export an either 720p or 1080p 3 minutes movie. I knew this error is casued by lacking of ram, but when i send the project file to FCPX, it successfully exported without any error. So... How can I fix that??
(I do not have any problems on my last iMovie Project)
Computer: MBP 13" Late 2011
Processor: 2.4 GHz Intel Core i5
Memory: 4 GB 1333 MHz DDR3
Graphics: Intel HD Graphics 3000 384MB
Software: Mac OS X Lion 10.7.4 (11E53)
**2.56 GB Free memory when all applications are closed ; 2.12GB Free memory when iMovie is opened ; 100 MB ~ 500MB Free memory before -108 error occured**
Hard Disk: 445 GB out of 500 GB Available Storage
Methods Tried:
- Repairing Hard Disk Permission
- Resetting PRAM
- Reinstall iMovie
- Kill ALL Applications
- Reinstall Mac OS X 10.7
- Remove iMovie Event and Project files and Restore it back to the original place
- Reboot
**ANY IDEA HOW TO FIX THIS??**

Hi
I don't belive in need of more RAM (at all)
Error -108
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try. (in application - in the Dock)
But it can mean many thing's - My first thought is
• Free Space on Start-Up hard disk. How much ? (other disks do not count)
Yours Bengt W

Generic Class Errors continue

Hi have had "generic class" errors with my printers on my MacPro for over two years now. First with a Samsung and now with a Brother printer. I have the latest drivers for the Mac, I have the latest Leopard and I still get these really annoying errors that require restarting everything. I had the problems with Tiger too.
Is there any way to avoid this kind of mess?
Any help appreciated.

kittireddy wrote:
What is "Generic class" in Java? and what's use of that?It's just added to confuse new programmers.
Give me an idea with an exampleNo problem:
public class GenericsExample {
    public static void main(String[] args) {
        new X<String>(new X<String>("Y"));
class X<Y> {
    Y x;
    X(Y y) { x = y; }
    X(X<Y> y) { System.out.println("y.x = "+y.x); }
}

Bonjour Service continuously logging errors....

Hi everyone,
Hoping for some help with a weird problem. I've done some searching but can't a confirmed solution.
The Bonjour Service has been logging 'Task Scheduling Errors' (Error 100) on my Win7 laptop for weeks now. The behavior is erratic, but when it happens, it sometimes continues until my system hits a BSOD. Sometimes, thousands of similar messages will appear within the course of a few minutes. Here is the error output of the first few messages of a set:
Task Scheduling Error: Continuously busy for more than a second
Task Scheduling Error: m->NextScheduledEvent 1045
Task Scheduling Error: m->NextScheduledSPRetry 1045
Task Scheduling Error: Continuously busy for more than a second
From there, it's basically an endless cycle of the busy message, NextScheduledEvent, and NextScheduledSPRetry.
Any insight to these issues? I think I've been able to temporarily solve the problem by changing the Service type to 'Manual' in services.msc, but am looking for a more solution-y... solution.
Thanks much,
NS

I upgraded to Windows 7 x64 a week ago and am seeing the same sort of issues:-
26/09/2010 21:44:51 Task Scheduling Error: m->NextScheduledSPRetry 999
26/09/2010 21:44:51 Task Scheduling Error: m->NextScheduledEvent 999
26/09/2010 21:44:51 Task Scheduling Error: Continuously busy for more than a second
repeated in threes every second until
26/09/2010 21:57:03 Service started
starts again the next day...
27/09/2010 21:44:13 Task Scheduling Error: m->NextScheduledSPRetry 998
same messages until around 27/09/2010 21:56:29
and similarly again on 28th, then today 7:34 to 7:44, again at 16:54 to 17:04 and 18:01 to 18:13.

Errors continues.

Similar Messages

Maybe you are looking for