Errors FTPing XML into iFS

Installing IFSCMS application from Technet (on NT, 8.1.7, iFS Version 1.1.6). Successfully FTP'd the JSPs into /ifs/webui/jsps directory. Then made mistake of trying to drag and drop XML files into iFS. I say "mistake" only because IFSCMS install doc says to use FTP; however, iFS documentation states that all XML files are parsed by default when using FTP or SMB. [Note: IFSCMS doc doesn't say which directory to upload XML files into...] Have now deleted folder containing dragged-and-dropped XMLs. When going back to upload via FTP, on first file (ContentMenu.xml) I get the following error: 150 ASCII data connection for ContentMenu.xml (xxx.xxx.xxx.xxx,1,240) (0 bytes).
500 STOR Error: IFS-30010: Attribute would not be unique (DATABASEOBJECTNAME)
157 bytes sent in 0.00 seconds (157000.00 Kbytes/sec). How should I proceed? Thanks for your help...

Maybe never mind. It looks like the objects parsed, and I guess that the objects created the error the second time around ??? because of some primary key/uniqueness constraint ???
After playing around (after walking around) I was able to continue, and now have registered and associated the class with the respective .JSP page. Forms even comes up when I double click the links in iFS!!! :-)
Anyway, it would be helpful if the install documentation (Installing iFS-CMS) indicated which directory the XML's should be uploaded to -- if it matters. (Step 4 of Loading JSP's and Java classes into iFS).

Similar Messages

Error editing task sequence: Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" From XML into WMI

I've started getting an intermittent error editing my Windows 7 OSD task sequence. Sometimes I can open the TS to edit, but when I try to apply changes I get the error. Other times I get the error when trying to open the TS. If I try again
right away, I still get the error, but if I wait a few minutes and try again sometimes it will open the TS.
The error reads:
ConfigMgr Error Object:instance of SMS_Extended Status{Description = "Failed to load dynamic properties for class \"SMS_TaskSequence_ApplyWindowsSettingsAction\" from XML into WMI";Error Code = 2147943746;File = "e:\\qfe\\nts\\sms\\siteserver\\sdk_provider\\smsprov\\ssptspackage.cpp";Line = 3454;Operation = "ExecMethod";ParameterInfo = "SMS_TaskSequencePackage";ProviderName = "WinMgmt";StatusCode = 2147749889;}
Coinciding with this error, I show the following entries in the TaskSequenceProvider.log file:
[PID: 7608] Invoking method SMS_TaskSequence.LoadFromXml
TaskSequenceProvider
Failed to protect memory buffer, hr=0x80070542
TaskSequenceProvider
Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load node Apply Windows Settings from XML into WMI 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "PostInstall" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "Execute Task Sequence" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load XML for the task sequence into WMI 0x80070542 (2147943746)
TaskSequenceProvider
[PID: 7608] Done with method SMS_TaskSequence.LoadFromXml
TaskSequenceProvider
Setting status complete: status code = 0x80070542; Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI
TaskSequenceProvider
I exported the task sequence and checked in "object.xml" for the "ApplyWindowsSettingsAction", to see if there was something odd in the xml, but I don't find anything that jumps out as being wrong. Here's the section of XML for
that step. I've removed identifying info, and replaced it with a generic term in bold.
<step type="SMS_TaskSequence_ApplyWindowsSettingsAction" name="Apply Windows Settings" description="" runIn="WinPE" successCodeList="0" runFromNet="false"><action>osdwinsettings.exe /config</action><defaultVarList><variable name="OSDLocalAdminPassword" property="AdminPassword"></variable><variable name="OSDComputerName" property="ComputerName">%_SMSTSMachineName%</variable><variable name="OSDProductKey" property="ProductKey"></variable><variable name="OSDRandomAdminPassword" property="RandomAdminPassword">false</variable><variable name="OSDRegisteredOrgName" property="RegisteredOrgName">COMPANY NAME</variable><variable name="OSDRegisteredUserName" property="RegisteredUserName">COMPANY NAME</variable><variable name="OSDServerLicenseConnectionLimit" property="ServerLicenseConnectionLimit">5</variable><variable name="OSDTimeZone" property="TimeZone">Central Standard Time</variable></defaultVarList></step><step type="SMS_TaskSequence_ApplyNetworkSettingsAction" name="Apply Network Settings" description="" runIn="WinPEandFullOS" successCodeList="0" runFromNet="false"><action>osdnetsettings.exe configure</action><defaultVarList><variable name="OSDDomainName" property="DomainName">DOMAIN.COM</variable><variable name="OSDJoinPassword" property="DomainPassword"></variable><variable name="OSDJoinAccount" property="DomainUsername">DOMAIN ACCOUNT</variable><variable name="OSDEnableTCPIPFiltering" property="EnableTCPIPFiltering" hidden="true">false</variable><variable name="OSDNetworkJoinType" property="NetworkJoinType">0</variable><variable name="OSDAdapterCount" property="NumAdapters" hidden="true">0</variable></defaultVarList></step>
Is there any other log I should check for a clue on this issue? What could be causing this error?

Thanks for sharing that! I tend to save contacting MS support until after I've exhausted other options. I'm always afraid that I'll spend the $500 to open a case and then it turns out to be something simple that I would have found if I had just
kept working on it myself a little longer.
It looks like that link is for an update released in February as KB3023562. I downloaded and installed it. I'll try opening/editing/saving the task sequence a few times today to see if the issue is resolved.
After I had already installed it, I thought to look up that update in configmgr. The update is listed as superseded by 2 other updates. The newest of those is KB3046049, which just installed last night with the other March patches, so it's possible
that I didn't need to install KB3023562 after all.

Error while logging into BI Publisher

Hello All,
I get the below error while logging into BI Publisher with the Default credentials
"oracle.apps.xdo.servlet.resourc eNotFoundException: %s_Reports_Path%/Admin/Security/principals.xml "
Any inputs on this is highly appreciated.
Thanks,
Vasavi

Hi ,
Check the following thread
BI Publisher login fails
May be the same issue is sloved...
Thanks,
Ananth

Error in XML Parsing through Schema doc.

I know this is not the correct group for XML related queries. I had posted the query in XML forum but could not get any reply. I have been in the forum and know this is very active forum.
Please help if you can..
Hi Friends,
I am trying to validate XML file as per the defined schema document through JAXB parser.
Following is my xml. schema and java class code.
XML File*
<?xml version="1.0"?>
<notify xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="NotificationDetailsSchema.xsd">
<notification>
<alertname>Alert1</alertname>
<deletable>Y</deletable>
<descurl>Alert1URL</descurl>
</notification>
<notification>
<alertname>Alert2</alertname>
<deletable>Y</deletable>
<descurl>Alert2URL</descurl>
</notification>
</notify>
Schema file_
<?xml version="1.0" encoding="windows-1252"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
<xsd:element name="notify">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="notification" maxOccurs="unbounded">
<xsd:complexType mixed="true">
<xsd:sequence>
<xsd:element name="alertname">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="1"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="deletable">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="Y|N"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="descurl">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="1"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
Java Class_
SAXSource source = new SAXSource (xmlInputSource);
SchemaFactory sf = SchemaFactory.newInstance (XMLConstants.W3C_XML_SCHEMA_NS_URI);
Schema schema = sf.newSchema(schemaFileObj);
Validator validator = schema.newValidator ();
validator.setErrorHandler (new ParserErrorHandler());
validator.validate (source);
I tried to execute the validation through stand along java class and it worked correctly.
However when I added this class into my Fusion web application, I am getting following error.
org.xml.sax.SAXParseException: s4s-elt-character: Non-whitespace characters are not allowed in schema elements other than 'xs:appinfo' and 'xs:documentation'. Saw 'Alert1'._
Can you please help me to figure out this problem?
Edited by: Jaykishan on Jul 20, 2011 10:04 AM

earlier it was
org.xml.sax.SAXParseException: s4s-elt-character: Non-whitespace characters are not allowed in schema elements other than 'xs:appinfo' and 'xs:documentation'. Saw 'USAVER'.anmd now it is
org.xml.sax.SAXParseException: s4s-elt-character: Non-whitespace characters are not allowed in schema elements other than 'xs:appinfo' and 'xs:documentation'. Saw 'Alert1'.some problem in this Alert1 message is what i guess.. some parsing error.. look closely..
i guess some of the xml characters are not rendered properly in forum software.. or it may be truncated.. so i believe something wrong which is not visible..

Error: IDoc XML data record

Hi all,
   We have file->XI->idoc scenario and the problem we are facing is like, when the idoc structure is prepared using XSLT mapping, when the idoc is ready to get in thru the idoc adapter we are getting the following error.
<i><b>Error: IDoc XML data record: In segment
Z1UKGAS_HEADR attribute occurred instead of SEGMENT                                </b></i>
Anyone faced the same issue....if so pls do throw some light into this issue....
We r in XI 3.0 SP13...
Thanks & regards,
Jayakrishnan

Hi,
In an IDOC structure segment attribute is requried. From the error you posted, it looks like seqment attribute is missing.
<Z>
   <IDOC BEGIN="">
      <ED SEGMENT="">
      </ED>
   </IDOC>
</Z>
Naveen

How to Parse XML into String in BPEL?

Hi,
Can anyone tell me, how can I parse XML into String?
I am taking input from File Adapter, File adapter is reading that XML.
Then in assign activity i am using XPath expression(built functions) using XMLParser(),doTranslateToNative() etc.. many functions I have tried but XML is not getting parsed into String Variable.
Please help me asap.
Thanks
Shikha

Thanks a lot Eric.
I am trying this, oraext:get-content-as-string('receiveInput_Read_InputVariable','body','/ns3:orders')
but getting this error
<bpelFault><faultType>0</faultType><subLanguageExecutionFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is oraext:get-content-as-string('receiveInput_Read_InputVariable','body','/ns3:orders'). The XPath expression failed to execute; the reason was: internal xpath error. Check the detailed root cause described in the exception message text and verify that the XPath query is correct. </summary></part><part name="code"><code>XPathExecutionError</code></part></subLanguageExecutionFault></bpelFault>

Error converting XML to String

I'm trying to use getXMLString() to put my XML document in a String variable. I get the following when I try to output the String:
<?xml version = '1.0'?>
<ERROR>oracle.xml.sql.OracleXMLSQLException: This object has been closed. If the close() was implicit, and you would like the object not to be closed between calls, see the keepCursorAlive() method</ERROR>
If I just output the XML doc without putting it into a String variable it works fine.
System.out.println(q.getXMLString()); //OK
// get the XML document in string format
String xmlString = q.getXMLString(); //NOT OK
System.out.println(xmlString);
What am I doing wrong? Any help would be great!
Thanks,
Melani

Hi,
SMUM_XML_PARSE is a simplified, unreleased and undocumented version of the powerful, released and documented iXML
If you look at the GET_ELEMENT subroutine in that function module, you'll see that the nodes of type CO_NODE_CDATA_SECTION are simply ignored.
The simpliest thing for you, maybe, is to duplicate the code of SMUM_XML_PARSE (as it is rather easy to handle), and add a section to GET_ELEMENT. You'll have also to use IF_IXML_CDATA_SECTION interface and ixml_iid_cdata_section constant.
Documentation is here: [SAP Library: Interface if_ixml_cdata_section|http://help.sap.com/saphelp_nw70/helpdata/en/bb/576658dca511d4990b00508b6b8b11/frameset.htm ]
Best regards,
Sandra

How to convert XML into idocs and post in ECC using PI

Hello All,
I want to configure the scenario like this MDM->PI->ECC. Using FTP I am getting able to fetch the xml file from MDM Server Ready folder. Now, I need to convert this XML file into Idocs and post it in ECC. Can anyone provide me step by step configuration in PI to achieve this. I have configured communication channel with adapter type Idoc in Itegration Builder. But, I am not sure where it will do the conversion of XML into Idoc and how do post it to ECC. I am working first time on PI 7.1. I have worked on XI 3.0 in 2006-2007. Any help to configure this step by step shall be appreciated.
Thanks & Regards,
Hemal

In you have the XML from MDM you have to use the mapping provided by the funtionals in the Funtional specification documents. once you did it you must configure the Receiver IDoc Adapter. and later dont fonget to configure properly the ReceiverAgreement.
as you receive the docuement from MDM via FTP, thats not a SAP System that means that you have to define PI as the sender of the IDoc,otherwise you will have the Error "Unable to convert the sender service to an ALE logical system"
to do that in the receiver Agreement>Header Mapping>Sender System-->Select PI server.
Take in mind to send IDocs to any SAP System, the system that send it must be a SAP system too. thats why you configure it
http://help.sap.com/saphelp_nw04/helpdata/en/5d/112d20f6ce6c46ba66afb98d278fbd/frameset.htm
Another thing is you have configure the ALE distribution Model.
se this:
http://wiki.sdn.sap.com/wiki/display/XI/FileToIDOC
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
Let us know
Rodrigo P-.

HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7

All -
I'm new to consuming web services in JDeveloper. I'm using Oracle JDEV 10.1.3.3/OC4J. I'm using this version since it is compatible with Oracle EBS 12.1.3. My intent is to pull data from our third party recruitment app (Success Factors) and load that data into Oracle HRIS. I'm already doing this through a .NET application. I'm converting it to be a Java Concurrent Program in EBS. The code listed below is a stub call to verify I'm on the right track. I created a JDeveloper Web Services proxy project. I'm testing it locally on my windows desktop. When I'm able to consume the service successfully, then I'll think about moving it to the EBS server.
I'm getting the following error when I invoke the following service:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
End point is: https://api4.successfactors.com/sfapi/v1/soap?wsdl
Any help/assistance would be much appreciated.
Below is my code and output of my test:
package emsc.oracle.apps.emscper.sfapi.proxy;
import HTTPClient.HTTPConnection;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.IsValidSession;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.IsValidSessionResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Login;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LoginResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LoginResult;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Logout;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LogoutResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.SFCredential;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.SFParameter;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Error;
import java.io.File;
import javax.xml.rpc.ServiceFactory;
import java.util.ArrayList;
import java.util.List;
import java.util.Date;
import javax.xml.ws.BindingProvider;
import javax.xml.soap.SOAPException;
import java.util.Map;
import oracle.security.ssl.OracleSSLCredential;
public class SFAPITest {
    // Declare members:
    private String companyId;
    private String userName;
    private String password;
    private String developerKey;
    private Date   effDt;
    private String greaterThanEffDt;
    private String lessThanEffDt;
    // Declare constants:
    final static private String breakLine = "+---------------------------------------------------------------------------+";
    final static private String format    = "yyyy-mm-dd";
    private enum ReqId {
        PrimaryReq(25),
        PrimaryReqCEO(26),
        EmCarePrimary(27),
        RTI(28),
        EmCareClinical(29);
        private int reqId;
        private ReqId() {
        private ReqId(int value) {
            reqId = value;
        public int getReqId() {
            return reqId;
    // Getters and Setters:
    protected String getCompanyId() {
       return this.companyId;
    protected void setCompanyId(String value) {
       this.companyId = value;
    protected String getUserName() {
       return this.userName;
    protected void setUserName(String value) {
       this.userName = value;
    protected String getPassword() {
       return this.password;
    protected void setPassword(String value) {
       this.password = value;
    protected String getDeveloperKey() {
       return this.developerKey;
    protected void setDeveloperKey(String value) {
       this.developerKey = value;
    protected Date getEffDt() {
        return this.effDt;
    protected void setEffDt(Date value) {
        this.effDt = value;
    protected String getGreaterThanEffDt() {
       return this.greaterThanEffDt;
    protected void setGreaterThanEffDt(String value) {
       this.greaterThanEffDt = value;
    protected String getLessThanEffDt() {
       return this.lessThanEffDt;
    protected void setLessThanEffDt(String value) {
       this.lessThanEffDt = value;
    public void runProgram()
        SFAPIService mySFAPIService;
        String CompletionText = "";
        String effDtStr2 = null;
    /* Code your program logic here.
    * Use getJDBCConnection method to get the connection object for any
    * JDBC operations.
    * Use CpContext provided commit,rollback methods to commit/rollback
    * data base transactions.
    * Don't forget to release the connection before returning from this
    * method.
    /* Call setCompletion method to set the request completion status and
    * completion text.
    * Status values are ReqCompletion.NORMAL,ReqCompletion.WARNING,
    * ReqCompletion.ERROR.
    * Use Completion text message of length 240 characters. If it is more
    * than 240 then full string will appear in log file and truncated 240
    * characters will be used as request completion text.
    try
        ServiceFactory factory = ServiceFactory.newInstance();
        mySFAPIService = (emsc.oracle.apps.emscper.sfapi.proxy.SFAPIService)factory.loadService(emsc.oracle.apps.emscper.sfapi.proxy.SFAPIService.class);
        SFAPI api = mySFAPIService.getSFAPI();
       /// SFAPI api = new SFAPI();
        //Map<String, Object> requestContext = ((BindingProvider) api).getRequestContext();
        //requestContext.put(BindingProvider.SESSION_MAINTAIN_PROPERTY, true);
        System.out.println("ServiceName => " + mySFAPIService.getServiceName().toString());
        System.out.println("End Point   => " + mySFAPIService.getServiceName().toString());
        System.out.println(breakLine);
        // Authentication: Login to SFAPI:
        SFCredential credential = new SFCredential();
        // Fake credentials being passed in for this post:
        credential.setCompanyId("XXX");
        credential.setUsername("XXX");
        credential.setPassword("XXX");
        credential.setDeveloperKey("XXX");
        HTTPConnection httpsConnection = null;
        OracleSSLCredential _credential = new OracleSSLCredential();
        _credential.setWallet("\\\\\\C:\\Program Files\\Java\\jdk1.6.0_33\\jre\\lib\\security", "ParkEstes3");
        /*System.setProperty("javax.net.ssl.trustStore","C:\\\\\OraHome_1\\jdev\\jdevbin\\jdk\\jre\\lib\\security\\keystore");
        System.setProperty("javax.net.ssl.trustStorePassword","changeit");
        System.out.println(System.getProperty("javax.net.ssl.trustStore"));*/
        // SFParameter: Define a generic SFParameter List. This is a necessary parameter
        // to invoking calls in SFAPI:
         /*System.setProperty("javax.net.ssl.keyStore",
         "file:\\\C:\\jdk1.4.1\\jre\\lib\\security\\client.keystore");
         System.setProperty("javax.net.ssl.keyStorePassword","welcome");         */
        /* System.setProperty("oracle.net.wallet_location",
                      "(SOURCE=(METHOD=file)(METHOD_DATA=(DIRECTORY=\\\C:\Users\dparrish\Oracle\WALLETS)))"); // (2)                     */
        File kstore = new File("C:\\OraHome_1\\jdev\\jdevbin\\jdk\\jre\\lib\\security\\jssecacerts");
        boolean exists = kstore.exists();
        if (!exists) {
            System.out.println("Keystore does not exist");
        else {
            System.out.println("Keystore does exist");
        System.setProperty("javax.net.ssl.trustStore", kstore.getAbsolutePath());
        System.setProperty("javax.net.ssl.trustStorePassword", "changeit");
        //System.setProperty("proxySet", "false");
        //System.setProperty("http.proxyHost", "127.0.0.1");
        //System.setProperty("http.proxyPort", "8080");
        System.out.println(kstore.getAbsolutePath());
        List<SFParameter> lst = new ArrayList<SFParameter>();
        SFParameter param = new SFParameter();
        param.setName("");
        param.setValue("");
        lst.add(param);
        SFParameter[] sfParam = lst.toArray(new SFParameter[lst.size()]);
        Login login = new Login();
        try {
            login.setCredential(credential);
            System.out.println("1");
            login.setParam(sfParam);
            System.out.println("2");
            LoginResponse loginResponse = new LoginResponse();
            LoginResult loginResult = new LoginResult();
            try {
                 loginResponse = api.login(login);
            catch (Exception e ) {
                System.out.println(e.getMessage());
            System.out.println("3");
            try {
                 loginResult = loginResponse.getResult();
            catch (Exception e ) {
                System.out.println(e.getMessage());
            System.out.println("4");
            IsValidSession vs = new IsValidSession();
            IsValidSessionResponse isValidSessionResponse = api.isValidSession(vs);
            System.out.println("5");
            if (isValidSessionResponse.isResult()) {
                 System.out.println("Session is valid");
                 System.out.println("Result => " + loginResult.getSessionId());
                 System.out.println(breakLine);
                Logout logout = new Logout();
                LogoutResponse logoutResponse = api.logout(logout);
                if (logoutResponse.isResult()) {
                     System.out.println("Logout of SFAPI Successful");
                else {
                    System.out.println("Logout of SFAPI Unsuccessful");
            else {
                 System.out.println("Session is invalid");
                List<Error> errors = new ArrayList<Error>();
                for (int i = 0; i < loginResult.getError().length; i++) {
                    errors.add(loginResult.getError()[i]);
                for (int i = 0; i < errors.size(); i++) {
                     System.out.println("Error Indice   => " + i);
                     System.out.println("Error Code:    => " + errors.get(i).getErrorCode());
                     System.out.println("Error Message: => " + errors.get(i).getErrorMessage());
                     System.out.println(breakLine);
                } // end for loop of SFObject errors
            } // end InvalidSession
        catch (Exception e)
             System.out.println("Session Credential Exception");
             System.out.println("Exception => " + e.getMessage());
             System.out.println(breakLine);
    catch (Exception e)
        System.out.println("Parameter List Exception");
        System.out.println("Exception => " + e.getMessage());
        System.out.println(breakLine);
    }   // end runProgram
    // Constructor:
    public SFAPITest() {
    } // end constructor
    public static void main (String args[]) {
        try
            SFAPITest test = new SFAPITest();
            test.runProgram();
        catch (Exception e) {
            System.out.println("main exception => " + e.getMessage());
} // SFAPITest
Here is the output with trace:
WARNING: Unable to connect to URL: https://api4.successfactors.com:443/sfapi/v1/soap due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
Session Credential Exception
Exception => ; nested exception is:
    HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
+---------------------------------------------------------------------------+
Process exited with exit code 0.

The other end is throwing back a programming error.
That might be because you are sending incorrect data and the other end fails to validate it.
You might be able to guess based on your C# code. But, since you are using soap one generic solution is available to you.
- Get an http proxy interceptor like wireshark.
- Run it while your C# app runs, collect the http requests from that.
- Run it while running your java code, collect the http requests from that.
Compare the two.

OSB download 250 MG file results in error Error parsing XML: {err}FORG0005

Hi,
Using OSB 11.1.1.5. I have service to download files from Oracle ECM. Running into an issue where the file size is over 250 MB service is failing. Giving me an error
OSB Replace action failed updating variable "body": Error parsing XML: {err}FORG0005: expected exactly one item, got 0 items
I have service callout to get the binary content of the file and it's taking over 5 minutes and then this error. I also set Read Timeout and Connection Timeout to 20 seconds at the business service level
but looks like it's not taking that timeout values and still waiting over 5 minutes before it dies. My JTA Timeout is set to 12 minutes. After service callout I have a log to write the output but it's not even getting there and throwing that error above
How can I trap that kind of errors. How can I set timeout at service level i.e. if after 1 minute if the file is still downloading close the connection etc.
I don't want to have some many open threads in the back ground as this service is being called in a loop to download files. Smaller files like 30 MG downloads fine but the larger ones are not.
I have a error hndler at the root level but the error is not trapped there either. Looks like system errors are not getting trapped.
So Just wondering if OSB is suitable to download that huge files.
Thanks

The reason for the error is the xquery is not able to find the values in the input... Check the input and namespaces...
Try...
<ns1:value1>{ data($addition1/ns0:value1) }</ns1:value1>
<ns1:value2>{ data($addition1/ns0:value2) }</ns1:value2>Cheers,
Vlad

JDBC Receiver adapter Error for insert into DB2 table

Hi all,
I want to insert data into a DB2 table on AS400 via a Receiver JDBC adapter.
The communication channel seems to be ok but when I try to send the message, I obtain the following message on the adapter monitoring :
Error: TransformException error in xml processor class, rollback:
Error processing request in sax parser: Error when executing statement for table/stored proc. 'GIK.GDT01' (structure 'Statement'): java.sql.SQLException: La table GDT01 de la bibliothèque GIK est incorrecte pour cette opération.
Could someone help me?
In the communication channel I have seen we can choose "native SQL String" as message protocol.
Do you think it could be a workaround for me? if yes, could someone send me an example about it?
thanks a lot,
Philippe

Hi,
Try to remove GIK.GDT01 in table tag of your XML structure and put GDT01 alone and see.
The solution to your problem is found on this particular link.
http://www.websina.com/bugzero/faq/exception-as400.html
Tell me if it works
Best regards,
Felix

B2B-50029: B2B runtime error: oracle.xml.parser.v2.XMLParseException: Start of root element expected.

Dear All,
I am a beginner to Oracle B2B.
I have created an agreement to Recieve 852, Product Activity data(POS) from one of the Trading partner. This is an inbound process.
A SOA composite application is created to Recieve the data and insert into perticular columns of the database table using database adapter.
I have tested the Interface with some couple of file and it went perfect without any error. Now I have to test the interface with some other files.
This time also I am not getting any error in Business Message, Wire message and Application message but the composite application is not picked.
The log file shows : B2B-50029: B2B runtime error: oracle.xml.parser.v2.XMLParserException: Start of root element expected.
Please let me know if anyone has faced this issue. it will be of great help.
Thanks,
Abhas Kushwaha

Hello,
Just a thought, When I had the similar problem, it appeared to be a BOM (Byte order mark - Wikipedia, the free encyclopedia) in the xml file, which is the very first character in the xml file, so the file was not identified to be a valid xml file. Removing the BOM from the xml file fixed my problem, however, I did not spend much time in fixing using B2B, the vendor (sender of the file) fixed the file and started sending without BOM. So my work was easier.
The character is not visible in all XML editors, however, it was visible in JDeveloper. I used a tool to identify and remove during testing until the vendor fixed the file, the tool is called file bom detector,http://www.bryntyounce.com/filebomdetector.htm
Hope this helps,
Thanks,
Venkatesh

Place XML into Library element

Hi,
I am automating the process of placing library element as anchored element.
The actual task is, I have an sidenote text in the indesign document. These text also contains   XML tags.
I want to place this sidenote text into an library item called "MN1". This library item is a group of Picture and Textframes. Then this library item is placed into the document as anchored element.
With my script, I am able place the XML into library item. But the problem is, I am not able to place this library item as anchored.
My script is:
#target indesign-6.0
var myDocument = app.activeDocument;
sideart();
// IMPORT BOXES INTO PAGES ON PASTEBOARD AREA
function sideart()
    var myCurrentLib = app.libraries.item(0);
    app.findGrepPreferences.findWhat = "(\\{\\{SS (.*?) (.*?)\\}\\})((.*\r)*?.*SE (.*?)\\}\\}\r?)";
    var found = myDocument.findGrep();
    for (var i =0; i<found.length; i++)
        found[i].select(SelectionOptions.replaceWith);
        var myLibName1 = found[i].contents.split(" ");
        var mySidID = myLibName1[1];
        var myLibName2 = myLibName1[2].split("=");
        var myLibName = myLibName2[1];
        var myRuleName1 = myLibName1[3].split("=");
        var myRuleName2 = myRuleName1[1].split("}}");
        var myRuleName = myRuleName2[0];
        app.cut();
        app.selection = null;
        myAsset = myCurrentLib.assets.item(myLibName.toString());
        var libItem = myAsset.placeAsset(app.documents[0]);
        app.select(libItem[0].textFrames[0].parentStory.insertionPoints.item(0));
        app.paste();
        libItem[0].textFrames[0].fit(FitOptions.frameToContent);
        app.findGrepPreferences.findWhat = "\\{\\{SE (.+?)\\}\\}\r";
        app.changeGrepPreferences.changeTo = "";
        libItem[0].textFrames[0].texts[0].changeGrep();
        app.findGrepPreferences.findWhat = "\\{\\{SS (.+?) (.+?)\\}\\}";
        app.changeGrepPreferences.changeTo = "";
        libItem[0].textFrames[0].texts[0].changeGrep();
        app.findGrepPreferences.findWhat = "";
        app.changeGrepPreferences.changeTo = "";
        app.findGrepPreferences.findWhat = "(\\{\\{SR " + mySidID + "\\}\\})";
        var foundref = myDocument.findGrep();
        if (foundref.length > 0)
            /// HERE I WANT TO PLACE libItem AS ANCHORED ITEM WITH THE OBJECT STYLE APPLIED TO IT.
        else {
            alert ("There is no Side art reference tag with ID: "+ mySidID);
My Indesign file look likes:
Factors Affecting the Direction of Transport{{SR ch04mn1}}
{{SS ch04mn1 L=MN1 O=TEST11}}The section on single-subject design was written by Dr. Stephen W. Stile.{{SE ch04mn1}}
In Chapter 3, we saw that the reactant and product molecules in a metabolic reaction have different energies. We also saw that the energy change of a reaction—the difference between the reactant and product energies—determines the direction of the reaction and whether it proceeds spontaneously or requires energy. In the following section we see that similar principles govern the transport of molecules across membranes.
Please suggest how to place grouped library item with XML as anchored item.
Thanks,
Gopal

Hi,
Upgrade to 9.2.0.3, until I upgrade I could not get the web-dav upload to work at all.
The only problems I've had with this is if I logged on to web-dav as a different user from that which I registered the schema with. One thing I have noticed, is that the file size is shown as being 0 when the xml has been shredded successfully.
And the previous answer is right, if you use FTP you might see better error messages.
Hope it helps,
John

Error in XML generate

Hi i am getting following error while generating XML
Error details:
Error report:
ORA-19202: Error occurred in XML processing
ORA-00904: "K_001": invalid identifier
ORA-06512: at "SYS.DBMS_XMLGEN", line 288
ORA-06512: at line 1
ORA-06512: at line 6
19202. 00000 - "Error occurred in XML processing%s"
*Cause: An error occurred when processing the XML function
*Action: Check the given error message and fix the appropriate problem
my code is :
DECLARE
V_xmldata CLOB;
v_id VARCHAR2(50):='K_001';
BEGIN
SELECT '<ns0:Employee_Details xmlns:ns0="http://BizTalk_Server_Project1.Employee_DesirableFormat">'
||chr(10)||dbms_xmlgen.getxmltype('SELECT xmlforest(emp_id, name, dept_id, xmlforest(add1,add2) AS Address,city) As Employees
FROM EMPLOYEES WHERE id ='||v_id).EXTRACT('ROWSET/ROW/*') || '</ns0:Employee_Details>' AS XML
INTO v_xmldata
from Dual;
INSERT INTO xmldata VALUES(V_xmldata);
END;
it genereated proper out put when id is number datatype.....but my id column is VARCHAR2...so giving me error. also tell me if any one of column holds null value then tag should be there
help me out ...Thanks in advance

Hi,
It could have worked if v_id had been a bind variable, but here you're concatenating strings so when parsing occurs K_001 is interpreted as an identifier and not a string value.
Solution is to enclose your string between additional quotes, either in the declaration section or in the query :
v_id VARCHAR2(50):='''K_001'''; or
'SELECT xmlforest(emp_id, name, dept_id, xmlforest(add1,add2) AS Address,city) As Employees
FROM EMPLOYEES WHERE id = ''' || v_id || ''''That being said, your method to produce the XML content is a little overcomplicated and not really "elegant" : context switch, no bind variable, string concatenation with xmltype ...
I'm pretty sure it can be done with a single SELECT from your base table using solely SQL/XML functions.
Care to share some sample data and required output?
Thanks.
Edited by: odie_63 on 14 sept. 2010 20:19

Pass xml into a cfdiv

Hello, I've got an application that can sort large XML payloads and display the results in a cfdiv. My test tool had the XML already in the application, now I need to be able to pass the xml into the file bound to the cfdiv. The problem I'm getting is that it errors for the long URI. I've tried the Coldfusion.naviagate function with the method set to Post but that doesn't work either. Any ideas?

are you wanting to just dispaly the XML? inw hich case you may find it easier to put it into a textarea.
Regards
Russ Michaels
blog: www.michaels.me.uk
www.cfmldeveloper.com - FREE ColdFusion developer hosting and community

Errors FTPing XML into iFS

Similar Messages

Maybe you are looking for