Errors not enough bandwidth...failed to respond

Hi All. I am on my new shiny Macbook and great it is. But ichat..what a pain in the a.r.s.e. I have tried with a friend in NY and it took ages of him changing proxies disabling firewalls etc...on and on and on. Keep getting insufficient badwidth. I have an 8meg line average 4.5meg I use airport then switched it of and used eathernet cable then it worked?? then it stopped again insufficient bandwidth and i did not respond Oh Yes I Did!!! So my question is does anyone know how in laymans terms to solve the problem as i am close to throwing said great macbook out of a very high window to see if it crashes...
Help
yours truly frustrated and getting angry now when i say now i already am and have been for days because of this...
Martin

Hi Martin
First try setting your Quicktime prefs, goto sys prefs/Quicktime/streaming and change streaming speed to what you get from your ISP dont go higher then 1.5.
Then goto iChats prefs/video/bandwidth limit change to NONE.
Restart iChat.
Tony

Similar Messages

ICHAT ERROR - Not enough bandwidth.....

I have the latest MINIMAC with ISIGHT. I can use ICHAT perfect with one of my friends who has the same computer. So this means my computer is fine and my bandwidth is enough. Then i recently bought another MINIMAC for my father. We tried connecting in two diffrenent locations and it did not work. The camera works and we are able to invite eachother to a video chat but it keeps giving a message that there is not enough bandwidth. I am quite sure that we both have enough bandwidth. I tested my computer from my side and i have a download speed of about 1961 kbps and a upload speed of 1245 kbps. In Belgium i have used my computer in the same location as my father and i can connect to my other friend. I have had the same error message with another friend in Belgium.
Another problem that i am having is with ONE friend he can see me, invite me and we can videochat. From my side i never see him as available and so i can not invite him since he seems ofline. Viceversa it works.

Thanks Ralph. I will try to find out something more from Fastweb. The other friend of mine who i have video chatted with in Italy is using TIM-It the Italian
telecom provider service for internet. With him it works except that he can invite me and not vice versa. I also used a French provider in France (with a french provider when i was there with my other buddy in Italy (who also uses fastweb)and that worked fine. But Then my father tried to connect with me from France to me in Italy and that gave the bandwidth problem. So my conclusions is that the problem is sporadic. Strange. I got my ICHAT name when registering with Mac but then never renewed the service after the 1 month trial. Could that cause the unstability? Or can i change my ISP port 5060? I'll look around a bit more for answers? Thanks anyway.
Jacob

Cannot submit datapipe for urb 0, error -28: not enough bandwidth

cannot submit datapipe for urb 0, error -28: not enough bandwidth
What is causing this?
I read something about disabling the following:
:[ ] Enforce USB bandwidth allocation (EXPERIMENTAL)
:[ ] Dynamic USB minor allocation (EXPERIMENTAL)
But I feel that recompiling the kernel and changing in there is a bit out of my league but if it's the only solution there is I guess I have no choice.
Anyways, I was hoping someone here maybe has seen this issue and know how to solve it.

I don't think so. I remember for certain patchsets on Solaris (Sparc), to be able to apply the patchset - I had to download an interim patch to update the OUI version. It was necessary to apply that particular patchset. And I got that from Metalink, it was documented in the patchset help file. I guess, you should try the Metalink. The OUI version 10.1.0.4 I was referring to actually comes with iAS 10g R2. For the database version, 10g R2 - OUI version is 10.2.
Message was edited by:
zaferaktan

Disk Utility: Burn error: 0x80020022 The device failed to respond...

I've been working on archiving a ton of video to DVD. I'm using Dual-Layer discs to minimize the amount of physical storage space needed for the finished project. I burned several discs in iDVD in July and regularly received errors. Then the drive suddenly stopped loading any type of media. Anything I inserted would spin briefly and then eject. Repaired permissions and followed steps outlined here and here. Took the Mac back to the store where I bought it (sadly, not an Apple Store - nearest one is 12 hrs away) where naturally it performed flawlessly for the store rep.
So I took it home and resumed burning, now saving as a disc image (ignoring iDVD's warning about the performance of DVDs burned this way) and using Disk Utility, since iDVD didn't seem to be reliable. Burned about 25 discs, error-free, in this fashion, then three days ago, got the error: "Unable to burn “Disc 19.img”. (The device failed to respond properly, unable to recover or retry.)"
Retried the same image, and it worked. Then burned two more in the same fashion with no errors. Today I got the same error again. Logs are identical for each failed burn, except for the time span between certain lines.
Price of DL media being what it is, I'd hate to keep ruining discs if there's something I can do to avoid it. I suppose it could be bad media, but it seems odd that I'd get two bum discs that close together after burning so many without issue. Checked the site and the forums, and there doesn't seem to be any answers. Does anyone have any ideas? (Other than "try a different brand of media." I've got a buttload of these discs and it's too late to return them now.) Even if it just helps determine where the issue lies. Warranty will be up soon, so if it's hardware related, I need to get it taken care of quick.
Media: Philips DVD+R DL 8x
*Drive info:*
HL-DT-ST DVDRW GS21N:
Firmware Revision: SA15
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Insert media and refresh to show available burn speeds
DiscUtility.log:
2009-10-03 08:54:01 -0600: Burning Image “Disc 22.img”
2009-10-03 08:55:15 -0600: Image name: “Disc 22.img”
2009-10-03 08:55:15 -0600: Burn disc in: “HL-DT-ST DVDRW GS21N”
2009-10-03 08:55:15 -0600: Erase disc before burning: No
2009-10-03 08:55:15 -0600: Leave disc appendable: No
2009-10-03 08:55:15 -0600: Verify burned data after burning: Yes
2009-10-03 08:55:15 -0600: Eject disc after burning
2009-10-03 08:55:15 -0600:
2009-10-03 08:55:15 -0600: Preparing data for burn
2009-10-03 08:56:30 -0600: Opening session
2009-10-03 08:56:35 -0600: Opening track
2009-10-03 08:56:35 -0600: Writing track
2009-10-03 09:01:37 -0600: Finishing burn
2009-10-03 09:02:37 -0600: Closing session
2009-10-03 09:02:38 -0600: Finishing burn
2009-10-03 09:38:37 -0600: Burn failed
2009-10-03 09:38:37 -0600: The device failed to respond properly, unable to recover or retry.
2009-10-03 09:38:37 -0600: Additional information can be found in the ~/Library/Logs/DiscRecording.log log file.
2009-10-03 09:38:37 -0600: Unable to burn “Disc 22.img”. (The device failed to respond properly, unable to recover or retry.)
DiscRecording.log:
Disk Utility: Burn started, Sat Oct 3 08:55:15 2009
Disk Utility: Burning to DVD+R DL (CMC MAG D03) media with DAO strategy in HL-DT-ST DVDRW GS21N SA15 via ATAPI.
Disk Utility: Requested burn speed was 47x, actual burn speed is 4x.
Disk Utility: Burn failed, Sat Oct 3 09:37:15 2009
Disk Utility: Burn sense: 4/44/90 Hardware Error,
Disk Utility: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
Message was edited by: Weasel42

I have encountered the same problem. I have a Mac Book Pro from 2007, and it has gone through 3 DVD writers so far, all of which have ruined DVD+R DL disks. I have occasionally been able to burn one, but usually during verify, I get this error message:
Communication to the disk drive failed: 0x8002022
And disk utility fails with a "Invalid B-tree node size" error
Oddly, when I try to burn a disk near capacity (6.5Gb or more) it is more likely to fail than if I burn a smaller disk.
I've been using Memorex DVD+R DL disks, but I have used other brands in the past but they have failed, too. Out of about 50 disks so far, I have had success with about 5.

Not enough bandwidth to maintain connection

Okay here is my problem- I'm a college student living in an off campus type of dorm sharing an internet connection with many other people. My sister and I have tried to have video chat's using ichat. We both have macbooks however it seems like each time we try it says there is not enough bandwidth to maintain the connection. This applies to audio chats too. We also have our setting to bandwidth limit as being none. The next thing I am curious about is that on ichat certain people have three layers representing their video and audio chat capabilities. I know I should have three layers since I have all those capabilities but I don't. Any help would be sincerely appreciated.
Ally

nosylla2931
Because the total bandwidth is being shared among lots of people, your connection speed is likely to suffer, especially at peak periods. Have you tried at different times of the day to see if there's any improvement?
You could check the QuickTime streaming speed:
System preferences>QuickTime>Streaming
If it's set to Automatic, change it to 1.5 Mbps.
Also, set the iChat bandwidth limit to 'none' (iChat> Preferences> video).
If that fails, try the video version of Skype instead:
http://www.skype.com/download/skype/macosx/videopreview.html
Let us know if this doesn't get you chatting and we'll try some more things.
Dave

Bump VMware Server 1.0.7 Latest error --Not enough memory...

VMware Server Help Post
Platform:
Intel core 2 Duo E2168.
2G ram, but 1/2 just went missing. If this is causing my problems, the mind wobbles, yet it's easy to fix, yay!
Lots of harddrives! Lots of harddrive space.
gigabit eth.
Nvidia 7600GS 512MB
Highpoint raid card (soft) 132Gigs for VMs
Archlinux w/ 2.6.26.3-1 kernel
kernel-headers 2.6.25.8-1
History:
Four weeks ago--
Patched and installed VMware Server 1.0.5 on Archlinux with kernel 2.6.25... everything worked well. Bliss!
About 2 weeks ago--
Upgraded kernel to 2.6.26... time suck began.
Current status:
After banging on VMware and vmmon patch and source code for a while,
now have on kernel 2.6.26-arch--
VMware Server 1.0.7 with patch ...117d, modified as follows:
In .../vmmon-only/include/iocontrols.h
line 48 #define VMMON_VERSION (168 << 16 | 0) changed to:
line 48 #define VMMON_VERSION (138 << 16 | 0)
Patch reasoning [limited newb alert]:
Without 117d, vmmon fails to compile with error re: .nopage
With 117d, vmmon compiles and installs successfully but VMs
won't start with error re: expect version 138 got 168
With patch modified, now past the version error, but getting the error:
Not enough physical memory is available to power on this virtual machine.
To fix this problem, power off other virtual machines [No others on]
or adjust the additional memory settings to allow more virtual machine
memory to be swapped    [There's plenty of memory]
If you were able to power on this virtual machine on this host computer
in the past, try rebooting the host computer. Rebooting may allow you
to use slightly more host memory to run virtual machines. [Rebooting had no effect]
In log:
Failed to connect to vm: /mnt/VMs/Test Booger/Test Booger.vmx
vmdbPipe_Streams Couldn't read: OVL_STATUS_EOF
Error during launch: 11, The process exited with an error:
End of error message
Operation failed to change the VM to the expected power state.
Not enough physical memory is available to power on this virtual machine.
To fix this problem, power off other virtual machines [No others on]
or adjust the additional memory settings to allow more virtual machine
memory to be swapped    [There's plenty of memory]
If you were able to power on this virtual machine on this host computer
in the past, try rebooting the host computer. Rebooting may allow you
to use slightly more host memory to run virtual machines. [Rebooting had no effect]
There's plenty of memory and disk free space--
top -b >> top_out
top - 06:59:46 up 40 min, 0 users, load average: 0.02, 0.05, 0.03
Tasks: 113 total, 1 running, 112 sleeping, 0 stopped, 0 zombie
Cpu(s): 1.1%us, 0.5%sy, 0.0%ni, 97.2%id, 1.2%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 1034920k total, 441944k used, 592976k free, 17604k buffers
Swap: 2000084k total, 0k used, 2000084k free, 227224k cached
df -ha
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 72G 44G 25G 65% /
/dev/sdc1 20G 12G 7.5G 61% /mnt/home2
/dev/mapper/hpt45x_dcafabbcai1
153G 21G 132G 14% /mnt/VMs
I reduced host memory settings to 408MB and guest to 256MB as a test. [No effect]
After the tests I've done, I don't believe this error really has anything to do with low memory.
I don't know whether this is a bug, a patch problem, or, or, or, or .....
And so I post.
What next?
thanx in advance.
Last edited by maxbally (2008-09-15 23:33:21)

Hi Mike,
Mike23 wrote:
Hi, I develop the device which reads the data on TCP(I use ftp://ftp.ni.com/pub/devzone/epd/stm_2.0_installer.zip)
from crio and then displays them on 7 waveform chart ( 5 chart with 150000 history length and 2 with 600 - 1 minute of measurements) and 2 xy graph. After 10 minutes of work there is an error “not enough memory to complete this operation”. On the WIndows Task manger I have seen that there is a filling RAM approximately from 45 % up to 72 % then the mistake jumps out. But I do not know why. Help please.  Labview 8.6Windows Vista3 GB RAMP.S. Forgive for bad English.
It's likely that instead of trying to plot 5 charts with 150000 data-points, you're trying to plot 150000charts with 5 data-points! Try right-clicking on the chart - do you see "Transpose Array" property? If it's checked, UNcheck it (if UNchecked, check it!)
Cheers!
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)

Asha 306 Not enough bandwidth

When I try to stream you tube videos a message displays saying Not enough bandwidth, then operation failed. How can I rectify this?

It depends on what speed your network provider is giving.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

"Not enough bandwidth" message on IP Phones

Hi All,
We have a call manager 6.X cluster with remote sites. One of the remote locations is experiencing the low bandwidth error message. This message occurs sometimes throughout the peak times when no one is using the IP Phones. The WAN link is usually experiencing high latency of 300ms but the bandwidth is not being maxed out. The bandwidth is 10MB. The voice gateway is MGCP (2821) with T1 CAS PSTN.
All calls are made internally within the remote site and externally over the PSTN. No calls are made to other remote sites.
Remote site IP Phones
DP_M01, which has a location with audio bandwidth of 2MB and region of calls to other regions to use G729 and same region to use G711.
Remote site gateway
Assigned to DP_DC1, has a location with unlimited bandwidth and a region similar to above.
Can someone advise if there is any troubleshooting steps for this issue as I am out of options to try.

the location in which the phones are in defines the bandwidth, that "not enough bandwidth" message is typically displayed when the location in which the phone is in, runs out.
You can use RTMT to verify how much bandwidth a certain location has: Performance>Cisco Locations then check the location you are interested in. monitor. have a phone in it make a call and see if it substracts. you should not make it more than 2Mbps is Qos is set up for that bandwidth otherwise you are oversubscribing.
I believe 6.x still has the option to re-sync bandwidth, try that

What does "After Effects error: Not enough memory to initialize PSL. ( 83 :: 8 )" mean?

So, about a week ago I did a fresh install of 64-bit Windows 7 Ultimate on a new PC, and subscribed to the Adobe Creative Cloud, installing After Effects CS6 and Photoshop CS6 from the Adobe Application Manager, then doing all updates (and I just checked right now at 10:35PM on July 26th, I have the latest versions of everything).
After Effects was working completely normal, then just now, I tried to import a Photoshop .psd and I got the error message:
After Effects error: Not enough memory to initialize PSL.
( 83 :: 8 )
Then After Effects crashed. So now it opens up normally, but when I try to import a .psd or open an After Effects project saved from an earlier version of After Effects (CS3 to CS5) I get the same error and a crash, every single time.
Searching the forums, I see people talking about this error when importing .psds into CS5, and they say that getting the latest updates solved the issue for them (which obviously can't help me). I'm running all legit software on a brand new computer with 32 GB of RAM which has passed all my physical stress tests so I know it's not hardware related.
The one thing I saw people suggest is to hold down Ctrl-Alt-Shift when starting the program. When I do this, Windows asks if I want to allow After Effects to make changes to the system, and when I say yes, I can import .psds and open the older AE files. When I close After Effects and reopen it without holding down the Ctrl-Alt-Shift keys, it goes right back to crashing.
Obviously the smart-*** answer is "then hold down Ctrl-Alt-Shift, dummy", and I'll do that for now, but is there any clue what the problem is?
I feel like kind of a chump because I decided to stop using my student versions of Adobe software (I haven't been a student for about four years) and pay the full price for the cloud membership and the latest creative suite, and it's full of bugs.

Now, I get the same ( 83 :: 8 ) error listed above, followed by a new dialog window that reads:
After Effects error: Crash in progress. Last logged message was: <4488> <DynamicLink> <5> C:\Program Files\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro.exe
Then, when I click OK, I get:
After Effects can't continue: sorry, After Effects has crashed. For After Effects Help and Support, go to http://www.adobe.com/go/learn_ae_support. If you still can't resolve the issue, please contact Adobe Technical Support (2).
( 0 :: 42 )
Clicking OK to that gives me a chance to save the latest project, then the standard Windows 7 crash dialog window opens, the one that gives me the choice of "Check online for a solution and close the program" or just "Close the program" and lets me View problem details, which are:
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          AfterFX.exe
Application Version:          11.0.0.378
Application Timestamp:          4f6d63ab
Fault Module Name:          StackHash_a85b
Fault Module Version:          6.1.7601.17725
Fault Module Timestamp:          4ec4aa8e
Exception Code:          c0000374
Exception Offset:          00000000000c40f2
OS Version:          6.1.7601.2.1.0.256.1
Locale ID:          1033
Additional Information 1:          a85b
Additional Information 2:          a85ba096cc6b6acabe6eaf35bf34dc60
Additional Information 3:          f862
Additional Information 4:          f86227a9dfa15a47cdb6c94bb0d08360

6680-Voda live streaming-Not enough Bandwidth

Got a Nokia 6680 yesterday and could get the streaming Sky on Voda live no problem. I have tried today, it is saying not enough bandwidth and to check my network settings.
Not sure what to do at this point.
Any help would be appreciated please.

This is probably because you are not in a 3G reception area. The connection will be via GPRS and therefore not sufficient for video streaming (in most cases).
You can generally tell by look at the service indicator what sort of area you are in.
All About Symbian - News, reviews and software for S60 phones.

Logon rejected for Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.

Error: Logon rejected for Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.
The problem is that the SharePoint server will
function just fine for a week or so and then suddenly when a new user tries
to log on they get an error message indicating that not enough resources areavailable to
log them on and also user will to credential prompt while accessing share point site .
Raj

Hi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Thread creation error: Not enough storage is available to process this command

Two user in my company have this problem, I have already used the solution on the community but would come back after 2 to 3 weeks. They all have the message "Thread creation error: Not enough storage is available to process this command". I tried increase the virtual memory to 4Gb, update one client to the latest, reset IRPStackSize, delete temp folder. one client is 7.5.XX with windows 7 and another is 6.20.0.104 with Windows XP,My machine is also 6.20 with windows 7 but I dont have this problem.

Version previous to 7.6 worked fine. After update I have got this message and mostly of Skype GUI turns black or vanishes. No possibility of making more than one call before crash, It is amazing that a thread started about two weeks ago has no technical answer, at least. What do I do with my credits and my appointments? Throw them away?

Thread creation error: Not enough storage space

Hi,
Recently (the past week or so), my desktop client for Skype has been crashing regularly. This is accompanied by large (over 1.2GB) amounts of memory usage. At semi-regular intervals (say every few hours), Skype will post an error with the text "Thread creation error: Not enough storage space..."
I am using the latest build of Skype. I am not performing any Skype logging. This error is clearly an ongoing issue which has not been addressed, as prior threads have discussed this as well.

Errors like this have been addressed and continue to be addressed. Being that the errors are related to memory leakage of one form or the other, the problem can have several sources and be agitated by several programs. I personally run the latest version on all my machines in a 24/7 capacity and have not run into the problem. Some versions in the past created a similar error for me, yet the latest has not. If you've already updated your IE's flash and that has not alleviated the problem, the only other solution is running an earlier release that doesn't crash for you or restart Skype more often. I've had virtual video devices trigger this behavior by simply launching the video settings once. The virtual device even when not in use continued to consume memory under Skype until it crashed. So if you use any virtual audio/video components you may want to remove them to see if that changes anything. Some people have also blocked ads when those were the source.
http://community.skype.com/t5/Windows-desktop-client/low-storage/m-p/3974193/highlight/true#M344826

Blu-ray Error: "not enough fre storage". Code:"25", Note "Not enough space on media"

I have a project a Encore CS6 V6.0.1.013 for MAC.
I tryng export do Blu-ray Disc, but ireceved this error message
Blu-ray Error: "not enough fre storage". Code:"25", Note "Not enough space on media"
But at "Disc Info" i have 14.71mb free

My longer notes on this error:
The most common workaround for this is to build to a folder and burn with ImgBurn (for PC) or toast (for Mac).
Searches show that there has not been success in many situations. I do not believe that it is one problem.
I have generally believed that the error refers to temporary storage on the hard drive. And users underestimate the amount of temporary hard disk drive space used. For bluray it is about twice the disk or more.
Some users experience this error when they are creating dual layer BD disks, and a layer is more than 25G. Each video/layer must fit on one side.
And some users successfully burn their disk by re-encoding to a lower bitrate (a 25G BD disk does not hold 25G). Encore uses padding to predict the size on disk (e.g. add 10% to the amount of space it predicts that build will use), and it can be wrong.
Always good to "run as administrator, though I don't know that ever fixed this issue if someone wasn't.
For CS4 there was a required update for a Roxio component. I believed this was a temporary problem due to the combination of Win7 and Encore CS4, but users on newer OS and Encore have reported resolution of problems after installing the patch.

I'm getting an error: not enough space to backup on icloud, but I do have enough storage available. Can you advise?

I'm getting an error: not enough space to backup on icloud, but I do have enough storage available. Can you advise?

There shouldn't be any fee involved. Call the Apple online store for your country (1-800-MY-APPLE in the U.S. and Canada) and request a refund.
If the download is stuck, you can download in iTunes on your computer, then sync it to your iPad once your free up some space. This explains how to download your previous purchases to your computer: http://support.apple.com/kb/ht2519.

Errors not enough bandwidth...failed to respond

Similar Messages

Maybe you are looking for