Errors when despatching operations through CM25

Hi ,
When i am despatching operation through transaction CM25. I am getting an error messages.
Can any body tell me what is reason for below mention error messages.
Error on conversion of internal units of time: 00000000 000000
Order CI7000026868 operation 0010: Planning step was undone (UNDO)
All rescheduling was undone (UNDO)
Regards,
Amit

Hi,
Check the Standard values maintained for the Operation 10 in routing and also in Production Order.
-Thaila Shree

Similar Messages

Error when executing DBMS_ERRLOG through Stored Procedures...

Hi,
We have TWO schemas like IDWH_ODS and IDWH_ERR running on Oracle 10g Rel.2.
The schema IDWH_ERR has direct SELECT privilege on all the base tables in IDWH_ODS schema. (As Pl/sql doesn't support ROLE, we have granted direct SELECT on each of the tables)
IDWH_ODS schema has tables like ACCOUNT & CUSTOMER, for which I need to create DML Error logging tables in IDWH_ERR schema.
I have one procedure 'Cr_Errlog_Tabs' in IDWH_ERR schema which gets all tables in IDWH_ODS and creates Error logging table in IDWH_ERR schema using DBMS_ERRLOG package. My problem starts here,
When I execute the DBMS_ERRLOG package in IDWH_ERR through SQL*Plus LIKE,
> exec DBMS_ERRLOG.CREATE_ERROR_LOG('idwh_ods.ACCOUNT','ERR$_ACCOUNT','idwh_err');
it's creating the error log table 'ERR$_ACCOUNT' in IDWH_ERR schema.
(...the same will be working when execute through Anonymous plsql block)
BUT, when i execute the DBMS_ERRLOG package with same parameters through the stored Procedure 'Cr_Errlog_Tabs', it throws the following error...
ORA-01031: insufficient privileges
Please let me know how the solution at the earliest.

WHY DO YOU FEEL YOU HAVE TO START A NEW THREAD FOR YOUR PROBLEM!?
Insufficient priv error when executing DBMS_ERRLOG through PLSQL

Insufficient priv error when executing DBMS_ERRLOG through PLSQL

Hi,
I shall be grateful if any one of you give me the solution at the earliest.
I have 2 schemas like A & B those are running on Oracle 10g rel2.
As per my buz req' I need to create DML Error log table for 'A.T1' table in B schema using DBMS_ERRORLOG package.
I have granted direct SELECT on A.T1 to B (...not through ROLE as it doesn't work in plsql)
The problem is when i'm running the procedure,
DBMS_ERRLOG.CREATE_ERROR_LOG('A.T1', 'err_T1', 'B');
in SQL*Plus of B schema, it's creating the error log table successfully.
But the same will get failed when i run this error log procedure with in a procedure owned by B schema.
It throws 'ORA-01031: insufficient privileges'...
I hope this is related to privilege issue which is working fine in SQL*Plus but NOT in PLSQL stored procedure.
Awaiting your earliest reply.
Thanks.
- Ela

>I dont think it's an issue with direct privilege. Actually the
package is working when i execute it with in a ananymous block,
but the same get fails when execute it through procedures...
Role privs work with anonymous PL/SQL blocks. Does not work with stored PL/SQL code.
SQL> create user user1 identified by user1 default tablespace users quota 2M on users;
User created.
SQL> grant create session to user1;
Grant succeeded.
SQL> create role user1_role;
Role created.
SQL> grant create table, create procedure to user1_role;
Grant succeeded.
SQL> grant user1_role to user1;
Grant succeeded.
SQL> connect user1/user1
Connected.
PL/SQL procedure successfully completed.
SQL> create table x( n number );
Table created.
SQL> begin
2 execute immediate 'create table y( n number )';
3* end;
SQL> /
PL/SQL procedure successfully completed.
SQL> create or replace procedure CreateTable is
2 begin
3 execute immediate 'create table z( n number )';
4* end;
SQL> /
Procedure created.
SQL> exec CreateTable
BEGIN CreateTable; END;
ERROR at line 1:
ORA-01031: insufficient privileges
ORA-06512: at "USER1.CREATETABLE", line 3
ORA-06512: at line 1
SQL>

Insufficient privilege error when executing DBMS_ERRLOG through PLSQL

Hi,
I shall be grateful if any one of you give me the solution at the earliest.
I have 2 schemas like A & B those are running on Oracle 10g rel2.
As per my buz req' I need to create DML Error log table for 'A.T1' table in B schema using DBMS_ERRORLOG package.
I have granted direct SELECT on A.T1 to B (...not through ROLE as it doesn't work in plsql)
The problem is when i'm running the procedure,
DBMS_ERRLOG.CREATE_ERROR_LOG('A.T1', 'err_T1', 'B');
in SQL*Plus of B schema, it's creating the error log table successfully.
But the same will get failed when i run this error log procedure with in a procedure owned by B schema.
It throws 'ORA-01031: insufficient privileges'...
I hope this is related to privilege issue which is working fine in SQL*Plus but NOT in PLSQL stored procedure.
Awaiting your earliest reply.
Thanks.
- Ela

Hi,
It's not an issue with direct privilege. Actually the package is working when i execute it with in a ananymous block, but the same get fails when execute it through procedures...
Even we have given COMMENT ANY TABLE priv to the schema and that too didn't work out.
awaiting your reply.
-Saravanan

Error when create Operating Concern

Hi Experts;
At the time of creating a new operating concern after i have defined Characteristics and Value Fields, and checking the status I received the following error:
Error generating table KOMPAKE
Message no. KE434
Diagnosis
An error occurred while Table KOMPAKE was being generated.
Procedure
Analyze the error using Transaction SE11. Use the function 'Check'.
Then I wen to SE11 to check giving the table name as mentioned above, I found the following and could not fix the error;
Then after opening the Long Text it gave the following message:
Enhancement category for table missing
Message no. DT192
Procedure
Maintain the enhancement category in the table or structure maintenance in the ABAP Dictionary.
Then by opening the ((enhancement category)) link i received the following message then STOPPED where I could not do anything more!!!
Enhancement Category Selection
Definition
Structures and tables that were defined by SAP in the ABAP Dictionary can be enhanced subsequently by customers using Customizing includes or append structures. The enhancements do not only refer to structures/ tables themselves, but also to dependent structures that adopt the enhancement as an include or referenced structure. Append structures that only take effect at the end of the original structure can also cause shifts - in the case of dependent structures - even within these structures.
You must select an enhancement category for the following reason: In programs where there is no active Unicode check, enhancements to tables and structures can cause syntax and runtime errors during type checks and particularly in combination with deep structures.
In programs where there is an active Unicode check, statements, operand checks, and accesses with an offset and length are problematic - for example, if numeric or deep components are inserted into a purely character-type structure and the structure thus loses its character- type nature.
Depending on the structure definition, the radio buttons allowed in the dialog box are ready for input. Choose one of the possible enhancement categories:
Cannot be enhanced
The structure must not be enhanced.
Can be enhanced or character type
All structure components and their enhancements must be character-type (C, N, D, or T). The original structure and all enhancements through Customizing includes or through append structures are subject to this limitation.
Can be enhanced or character-type or numeric
The structure and its enhancement must not contain any deep data types (tables, references, strings).
Can be enhanced in any way
The structure and its enhancement may contain components whose data type can be of any type.
Not classified
This category can be chosen, for example, for a transition status; however, it must not be chosen for creating structures.
The rules for defining the enhancement category result implicitly from the structure setup and the classification of the types used. These rules are as follows:
If the object contains at least one numeric type or a substructure or component (field has a structure/table/view as its type) that can be enhanced numerically, the object can no longer be enhanced character-type, but is itself, at most, enhanceable character-type or numeric.
If the object contains a deep component (string, reference, or table type), or it contains a substructure or component that is marked as enhanceable in any way, then the object itself is enhanceable in any way.
If the object does not contain any substructure or component that is marked as enhanceable, you can select cannot be enhanced. If the structure has not yet been enhanced, you can choose the category cannot be enhanced in any case.
If you are creating new tables and structures in the ABAP Dictionary, the system proposes the category can be enhanced in any way as standard value for the classification of the enhancement options. If the developer chooses a more restrictive classification than can be enhanced in any way for a particular structure, then only the classification levels that adhere to the rules above are allowed. It is not possible to choose an enhancement option of a structure that is more restrictive than the classification resulting immplicitly from the structure setup and from the classification of the types used. Therefore, only the allowed categories are proposed for selection in the maintenance user interface.
If a structure depends on one or several other structures, the smallest category is chosen as implicit classification (in the order cannot be enhanced < can be enhanced and character-type < can be enhanced and character-type or numeric < can be enhanced in any way). This classification is greater than or less than the category in the other structures and also greater than or the same as the category that results from the actual setup in the original structure itself.
For more information, refer to the online documentation (pushbutton "i").
Thanks in advance;
Best regards;
Ahmad Mahmud;

Hi Mahmud,
You may need to refer this issue to ABAPer..
Regards
Mohit

Memory error when executing package through SQL Server Agent.

Hi!!
I have a problem with a package (SSIS) when run on SQL Server Agent.
The job is configured
with the proxy and the account has the
required privileges. Runs perfectly
if the job runs manually, but if I let it
run on schedule I get a memory error.
Also if I run the
package through DTExec.exe or VS2008,
everything runs smoothly.
I am using SQL2008R2.
If someone has something similar happened
and have found how to fix it please i need
to know how.
Thank you.

This is most likely your issue:
http://support.microsoft.com/kb/824422

AWTimage error when using getImage() through https

I am trying to display an image on an applet but I am getting an awtimage type of error. I am using the following code:
URL newLoc = new URL("https://202.124.142.223/test/data/images/");
filename = "sample.jpg";
Image i = applet.getImage(newLoc,filename);
RenderedOp source = JAI.create("AWTImage",i);
PlanarImage im = source;
Width = im.getWidth(); <-- i get error in this line. See error below.
Height = im.getHeight();
so on so forth...
========================================================
Error: One factory fails for the operation "AWTImage"
Occurs in: javax.media.jai.ThreadSafeOperationRegistry
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at javax.media.jai.FactoryCache.invoke(FactoryCache.java:130)
at javax.media.jai.OperationRegistry.invokeFactory(OperationRegistry.jav
a:1682)
at javax.media.jai.ThreadSafeOperationRegistry.invokeFactory(ThreadSafeO
perationRegistry.java:481)
at javax.media.jai.registry.RIFRegistry.create(RIFRegistry.java:340)
at javax.media.jai.RenderedOp.createInstance(RenderedOp.java:830)
at javax.media.jai.RenderedOp.createRendering(RenderedOp.java:878)
at javax.media.jai.RenderedOp.getWidth(RenderedOp.java:2190)
at IPanel.getImage2(IPanel.java:454)
at IPanel.loadImage(IPanel.java:282)
at c21Appletv3Integrated.loadImage(c21Appletv3Integrated.java:1637)
at listener.run(listener.java:158)
at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.RuntimeException: MediaTracker is unable to load the AWT im
age.
at com.sun.media.jai.opimage.AWTImageOpImage.layoutHelper(AWTImageOpImag
e.java:93)
at com.sun.media.jai.opimage.AWTImageOpImage.<init>(AWTImageOpImage.java
:151)
at com.sun.media.jai.opimage.AWTImageRIF.create(AWTImageRIF.java:65)
... 16 more
==========================================================
I tried this code before but it works pretty well. However, when I'm using https instead of plain http, I happen to encounter this type of error.
Can somebody help me solve this problem?
Thanks in advance for your help.

Timothy,
The 656x devices have a limit on the available data delay values based
on frequency. Between 25MHz and 50MHz there are "holes" in the
available delay range. Above 50MHz, the full 0 to 1 data delay is
valid. If you look in the specifications installed with NI HSDIO
for the NI 656x, on page 7, Figure 1, there is an illustration showing
how to compute what the valid range is for the frequency of interest.
For example, at 40MHz, valid values are:
0 to 0.2
0.3 to 0.7
0.8 to 1
In the error message posted below, you tried to input a value of 0.71875 which is not within these ranges.

Getting HeapDump on out of memory error when executing method through JNI

I have a C++ code that executes a method inside the jvm through the JNI.
I have a memory leak in my java code that results an out of memory error, this exception is caught in my C++ code and as a result the heap dump is not created on the disk.
I am running the jvm with
-XX:+HeapDumpOnOutOfMemoryError
-XX:HeapDumpPath=C:\x.hprof
Any suggestions?
Thanks

I'll rephrase it then.
I have a java class named PbsExecuter and one static method in it ExecuteCommand.
I am calling this method through JNI (using CallStaticObjectMethod). sometimes this method causes the jvm to throw OutOfMemoryError and I would like to get a heap dump on the disk when this happens in order to locate my memory leak.
I've started the jvm with JNI_CreateJavaVM and I've put two options inside the JavaVMInitArgs that is used to create the Jvm. -XX:+HeapDumpOnOutOfMemoryError and -XX:HeapDumpPath=C:\x.hprof
which supposed to create a heap dump on the disk when OutOfMemoryError occurs.
Normally if I would execute normal java code, when this exception would occur and I wouldn't catch it the Jvm would crash and the heap dump would be created on the disk.
Since I need to handle errors in my C++ code I am use ExceptionOccured() and extracts the exception message from the exception it self and write it.
For some reason when I execute this method through JNI it doesn't create the dump.

Error when loading hierarchy through flat file

Dear All,
We are facing an issue during hierarchy upload through flat file.
Below is the message :-
Error 8 when compiling the upload program: row 658, message: A newer version of data type /BIC/B0000559000 was.
Message no. RSAR233.
Nothing else is being displayed.
Request you to guide on this.
Thanks & Regards,
Anup

Hi,
I faced the same issue earlier.
This is what i did. SE38-RS_TRANSTRU_ACTIVATE_ALL run the program and give your sourcesystem name this activates all the structure including new version /BIC structure what you have stated.
After which you need to refresh the RSA1 Tcode and do the same process again to load the hierarchy.
It should work fine now.
Hope this helps.
Regards,
Harish
Edited by: Harish3152 on May 18, 2010 2:23 PM
Edited by: Harish3152 on May 18, 2010 2:32 PM

Data Load Error: When loading Hierarchy through a flat file

Hi Bw experts,
I am getting the error message: Info object is not available: Message RSAR210, when trying to load the Hierarchy through flat file upload with IDOC processing.The info object is active. I am getting this error message only for one hierarchy, other hierarchies for the same inof object are loaded successfully.Can some one help me in this?
Thanks in Advance.
Regards,
Bala

Hi Bala,
Can you please share the solution asap..
As we are also facing the same issue.
Your quick response will be appreciated a lot
Regards,
Sai

Error when running TM through PT60

Dear Exports,
Greetings!
Please find the below my query. Error popping up when i am running TM through PT60. Please find the attached error for the same.
0 entry in table $ for Key $ at T555Y 100200 07.07.2014
Technical Error No. 72
07.07.2014 processing terminated for EE 00000112 Mr. XXXXXXX
Kindly guide me for the same.
Thanks & Regards,
Vamshi Krishna M

Thank you for your response, please find the PCRs screen short below. Waiting for your suggestions.
Thank You In Advance,
Vamshi Krishna M

Soapfaultcode:1 Error when consuming webservice through abap proxy class

Hi All,
I am facing a issue executing a proxy class created by consuming web service.
I have consumed a web service which queries data from oracle server to process them in SAP.We have created a Proxy class and did the following configurations:
1) Created a logical port using SOAMANAGER
2) In SICF t-code we have selected No proxy setting for local server.
But when we execute the proxy class it gives an error as "SoapFaultCode:1'.
Regards,
Madhu.

Hi Madhu,
Please tel us how u have solved it. I am also facing this problem.
I am trying to understand this problem description 'SOAP ACTION name by definition of the logical port.' via the thread Re: Get error "SoapFaultCode:1"Consume web service in ABAP proxy - But couldn't able to understand how to do this.
Thank You,
Regards,
Naresh.

Error when applying leaves through ESS.

Hi experts,
I've a problem which I'm not sure if it's a problem of customizing or maybe a note not applied. I've searched in the forum and the solution is not working, could you please help me?
We have a mass save absences button from ESS which creates absences for infotype 2001 for all the employees selected. If you create a massive absences for employees in the same personnal group no error is displayed, but if you create a massive absence for mixed employees, it returns the following error: "HRTIM00REC 006 Attendance/absence type ENEM requires minimum of 1"
Does anybody know why? Could you please help me?
Thank you so much in advance for your help.
Regards,
Rebeca

Dear all,
First of all thanks for your support
I've been checking and yes, I have that the Absence ENEM is at minimum 1 and maximum 999. That absence doesn't have quota (because it is for illness) so this couldn't be the problem. Also I have seen that if I select in the portal all the employees for the same group, the absence is saved correctly, but when I saved for different group, it generates an error. I will explain with an example
employee: 2222 -> Personnel group 01
Employee: 3333 -> personnel group 01
Employee: 4444 -> Personnel group 02
Employee: 5555 -> Personnel group 01
Employee: 6666 -> Personnel group 01
If I create a massive absence for all the employees above, the absence will be created correctly for the first 3 ones, but the fourth and the fifth will return an error.
Do you know why?
Thanks again for your support.

BAPI_ALM_ORDER_MAINTAIN - cost determination error when deleting operations

Dear all,
I have a problem with BAPI 'BAPI_ALM_ORDER_MAINTAIN'.
When I add and delete operations several times in an order using this BAPI, cost determination works incorrectly:
in transaction IW32 Plan costs sum on 'Costs' tab becomes wrong. But if I look at the detailed report (Rep. Plan/Act button on the same tab), the total plan costs sum is correct.
What I have tried so far:
1. adding method 'CALCULATE' for the header (within the same call and within a call in separate transaction)
2. changing the order in IW32 and saving it
3. 'Calculate costs' button in the same transaction
3. clearing buffers using FM 'CO_ZF_DATA_RESET_COMPLETE' before calling the BAPI,
but without luck.
Any help will be much appreciated!
Andrey

Hi Andrey,
Thanks a lot for the prompt reply.
As you said, the problem is in the standard BAPI BAPI_ALM_ORDER_MAINTAIN where the costs table is not getting refreshed, it is taking the buffer value.
Few OSS notes like 750606 were suggested by SAP, which also suggested the solution suggested by you, ( to use'Destination 'NONE' when callling the function module so that the BAPI will get called in the new session each time ),but it did not work. and SAP note also says that the complete solution is not yet implemented.
So, to resolve this ( to clear the buffer) I have used two programs, the internal one is called by the main program using 'submit' statmeent so that buffer value is cleared as it is a separate program. Finally it worked out
Thanks & Regards,
Vishnu Priya

No error when Method Operation sets invalid precision in EO

Hi,
I stumbled upon a very strange behavior (bug ?) reproduced in the following simple test case.
Studio Edition Version 11.1.2.3.0, Build JDEVADF_11.1.2.3.0_GENERIC_120914.0223.6276.1
Using HR with default VO & EO for the regions table, I create a client interface AM method where sets an invalid value to the RegionName attribute:
    public void updateWithIllegalValueFromAM(){
        try {
            getRegions1().getCurrentRow().setAttribute("RegionName", "012345678901234567890123456789"); // (1)invalid precision/scale should be max 25 chars
        } catch (Exception e) {
            e.printStackTrace();//<-- Never executed
            throw new JboException(e); //<-- Never executed
        System.out.println(" updateWithIllegalValueFromAM End ");
    }Next in the JSP I create a read only form for the Region1 VO, including navigation, a button for the method operation and finally a commit operation.
Running the above and pressing the method operation button, the expected behavior is to see an error message but it is never shown until the transaction being committed.
Debugging I see that an exception is raised in the setter of the attribute but it doesn’t bubble up till the (1) catch statement.
As you might guess the real case is a read only screen with buttons for making actions for the current record . I assumed that the EO validations should be honored in such scenario but I am wrong …
If you have any clue why this happens please share it with me!
Yiannis
Edited by: Tses on Mar 22, 2013 1:06 AM

Thanks Sudipto,
I inserted the try/catch block for debugging, just to ensure that catch is never executed, that is the e.printStackTrace is not printed.
To be more clear I edited the above code.
Yiannis

Errors when despatching operations through CM25

Similar Messages

Maybe you are looking for