Errors while creating customers in CRM 5.0

when i create a new customer in CRM and check SMW01, the bdoc is failed for that customer and I get an error saying "No batch input data for screen SAPLV02Z 0100"
any idea on why this is coming?
Long text: The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
Possible reasons:
1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.
regards
RH

Hi RH,
Again I am mentioning the steps to find what batch data is missing in the batch input screen.
In transaction SMQS deregistor your R/3 system by pressing the button "Deregistration" then create a BP in CRM and save the data. Come back to the transaction SMQS again select your R/3 system and press the button QRFC monitor. Here you will find the queue related to your. Double click on it twice and then press the button Debug LUV. You will reach to the R/3 system ( make sure that the RFC user is dialog user in R/3 system).
but the break point at the statement " call transaction" and press F8. Here you change the value of mode from "N" to "A" in debugger and then press F8 again. by doing this you will get the batch input screen. Just keep on pressing enter and the system will fill the values. Here you will find what is the required entry missing.
You have to debug the R/3 Inbound to find what batch input data is missing.
Reward points if my post helps!!
Best regards,
Vikash.

Similar Messages

Error while creating Campaign in CRM

Hi all,
When I am trying to create Campaign in CRM, system is throwing an error saying that "Can not get RFC destination for SEM".
We are not using SEM in our project.
Can anybody suggest me how to avoid/rectify this error?
points will be guaranteed.
Thanks in advance.
Regards,
Rahul.

Hi Rahul,
As long your are not activate/ use the key figure planning or budget,
you can use without SEM. There is setting in SPRO to set this.
Also in your CRM Campaign, you do not use scenario planning.
Hope this helps,
Gun.

Error while creating customers in ECC

Every time we try and create a customer in ECC, we get this error "RFC Communication Failed".
we have tested the RFC connections they work fine.
any help will be appreciated
Thanks
RH

Hi RH,
Because of the time crunch I am not able to debug my system for your issue but I will tell you the steps how to find what required field is missing in your documet sent to your R/3 system.
In transaction SMQS deregistor your R/3 system by pressing the button "Deregistration" then create a BP in CRM and save the data. Come back to the transaction SMQS again select your R/3 system and press the button QRFC monitor. Here you will find the queue related to your. Double click on it twice and then press the button Debug LUV. You will reach to the R/3 system ( make sure that the RFC user is dialog user in R/3 system).
but the break point at the statement " call transaction" and press F8. Here you change the value of mode from "N" to "A" in debugger and then press F8 again. by doing this you will get the input screen. Just keep on pressing enter and the system will fill the values. Here you will find what is the required entry missing.
Do not forget to registor the R/3 system again in transaction SMQS once you are done with you debugging.
I have tried my best to explain the steps. If you get confused at any point of time do let me know.
Allot points if my post helps!!
Best regards,
Vikash.

Error while creating customers on sales pages

Hi Everyone,
When trying the process below:
Resp: Sales Online Super user
Sales Online
Customer tab--> Click on Create Button.
Enter mandatory fields and click on Create.
You will get the below error:
java.sql.SQLException: ORA-06502: PL/SQL: numeric or value error: character to number conversion error ORA-06512: at line 1 java.sql.SQLException: ORA-06502: PL/SQL: numeric or value error: character to number conversion error ORA-06512: at line 1 at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134) at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289) at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:590) at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1973) at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1119) at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2191) at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:2064) at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2989) at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:658) at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:736) at oracle.apps.ar.hz.v2api.HzPartyV2Pub.createOrganization(HzPartyV2Pub.java:1298) at oracle.apps.asf.customer.organization.OrganizationEO.createOrg(OrganizationEO.java:484) at oracle.apps.asf.customer.organization.OrganizationEO.create(OrganizationEO.java:548) at oracle.apps.asf.webbean.FormWebBean.process(FormWebBean.java:172) at oracle.apps.asf.webbean.WebBeanHandler.process(WebBeanHandler.java:255) at oa_html._asfOrgznCreatMain._jspService(_asfOrgznCreatMain.java:1267) at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119) at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417) at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267) at oracle.jsp.JspServlet.internalService(JspServlet.java:186) at oracle.jsp.JspServlet.service(JspServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:588) at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456) at org.apache.jserv.JServConnection.run(JServConnection.java:294) at java.lang.Thread.run(Thread.java:534)
Kindly help out on the steps to take to correct this error.
Best Regards.

Hi RH,
Because of the time crunch I am not able to debug my system for your issue but I will tell you the steps how to find what required field is missing in your documet sent to your R/3 system.
In transaction SMQS deregistor your R/3 system by pressing the button "Deregistration" then create a BP in CRM and save the data. Come back to the transaction SMQS again select your R/3 system and press the button QRFC monitor. Here you will find the queue related to your. Double click on it twice and then press the button Debug LUV. You will reach to the R/3 system ( make sure that the RFC user is dialog user in R/3 system).
but the break point at the statement " call transaction" and press F8. Here you change the value of mode from "N" to "A" in debugger and then press F8 again. by doing this you will get the input screen. Just keep on pressing enter and the system will fill the values. Here you will find what is the required entry missing.
Do not forget to registor the R/3 system again in transaction SMQS once you are done with you debugging.
I have tried my best to explain the steps. If you get confused at any point of time do let me know.
Allot points if my post helps!!
Best regards,
Vikash.

Error while creating order in crm

Dear Experts
I am facing a problem a with the order creation in the crm, problem is when i entered sold-to-party and material and quantity i am getting an warning message "Warnings occurred during cost calculation in ERP system" could you tell me what could be problem how to resolve this issue.
Thanks & Regards
V.Srinivas

Hi Srinivas,
Were you able to resolve this issue?
I am facing similar issue and looking for guidance.
Thanks

Error while creating and opening a ERP sales order in SAP CRM

Hi,
I am getting an error while creating or opening a ERP sales order from SAP CRM.
"Creation of the ERP Transaction failed" this is the error i'm getting while creating. when i try to open an existing sales order I'm getting a dump.
Attached the dump screen shot. From the dump analyasis it seems the transactions are not loaded through LORD framework.
The RFC connection seems to fine as i have tested accessing an ECC RFC FM through a sample program and its successful..
please help..
Thanks
Krishna

Hello Krishna,
Did you get a solution to this? I have the same dump message.
As a matter of fact, we already use ERP Sales Order and it works fine. But I have recently configured a new sales order document type, and the dump occurs only for this new Z order type.
Thanks a lot,
Luis.

Getting an error while creating a ERP Quotation from CRM Sales Web-UI.

Hi Experts,
I am getting an error while creating a ERP quotation from CRM Sales Web-UI. Here I am enclosing the screen shot. Please give me the solution for this.Thank you in advance.
Regards
Kishor Kumar.

Hi Kishore,
Please refer to the link below -
Entry of ERP Sales Documents in SAP CRM - Sales Quotation and Order Management - SAP Library
Also, refer to the SAP note -
1446253 - FAQ note: ERP documents in the CRM Web UI (lead-to-cash scenario)
This note will give you the related topic and the configuration required through SAP help links.
Hope this will be useful.
Thanks and Regards
DJ

Runtime Error ( EXPORT_NO_SHARED_MEMORY ) while creating order in CRM

Hi All,
i am getting runtime error while creating order in CRMD_ORDER. details of error is provided below
Runtime Errors         EXPORT_NO_SHARED_MEMORY
Exception              CX_SY_EXPORT_NO_SHARED_MEMORY
Date and Time          29.01.2009 02:07:58
Short text
     Der EXPORT-Datencluster ist zu groß für das SHARED MEMORY.
What happened?
     The current program had to be terminated because
     a capacity limit has been reached.
What can you do?
     Please make a note of the actions and input which caused the error.
     To resolve the problem, contact your
     SAP system administrator.
     Select the "Print" function to obtain a hardcopy of the
     current termination message.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_EXPORT_NO_SHARED_MEMORY', was
      not caught in
     procedure "CRM_EVENT_PUBLISH_OW" "(FUNCTION)", nor was it propagated by a
      RAISING clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
The reason for the exception is:
This is probably due to a very large dataset, for which there are
insufficient resources in your installation.
Das SHARED MEMORY kann Objekte nur bis zu einer bestimmten Maximalgröße
speichern (1) und hat selbst eine beschränkte Größe (2).
In diesem Fall wurde die Größe 2 überschritten.
to correct the error
Mit den Profilparametern rsdb/esm/buffersize_kb und
rsdb/esm/large_object_size kann man diese Größen verändern.
Informationen über diese Parameter erhalten Sie mit der
Transaktion RZ11.
Beachten Sie jedoch, dass aus Performancegründen ein einzelnes
Objekt nicht den größten Teil des Puffers belegen darf, so dass die
maximal zulässige Objektgröße erheblich unter der Gesamtgröße des
Puffers liegt.
The exception must either be prevented, caught within proedure
"CRM_EVENT_PUBLISH_OW" "(FUNCTION)", or its possible occurrence must be
declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:

Hello Sudhir,
Have you set the user parameter CRM_EVENT_TRACE as one of your personal
user settings? If this is the case, remove this parameter and the dump will no longer occur. The parameter is intended for test purposes only, for a report which evaluates
which events are published and which function modules are called as a
result of these events. However, depending on system settings, the
allocated memory may be too low and lead to the short dump.
(CRM_EVENT_TRACE is the report which can execute in SE38.)
Regards, Gerhard

Error while creating "RETURNS" as ERP Sales transaction type

Description: We are getting error while creating ERP SLO type "Returns-ZRE". Message prompts as "Creation of ERP Transaction failed". We do not get the message for other order types for example "Standard order".
Please suggest. Please note that this is an ERP sales order in CRM UI not a CR< sales order.
Thanks
Shree

Is this only for a particular order type?
As stated above this can be to do with user authorisations or the trusted RFC set up. Some things to check are:
- ST22 dumps in ECC
- ST01 authorisation trace for the user in ECC
- Trusted RFC connection set up

Error while creating new projects using api

Hello,
I am having error while creating projects using standard api, PA_PROJECT_PUB.CREATE_PROJECTS. The error I am having is as follow.
Source template ID is invalid.
===
My code is as follow:
SET SERVEROUTPUT ON SIZE 1000000
SET VERIFY OFF
define no=&amg_number
DECLARE
-- Variables used to initialize the session
l_user_id NUMBER;
l_responsibility_id NUMBER;
cursor get_key_members is
select person_id, project_role_type, rownum
from pa_project_players
where project_id = 1;
-- Counter variables
a NUMBER := 0;
m NUMBER := 0;
-- Variables needed for API standard parameters
l_commit VARCHAR2(1) := 'F';
l_init_msg_list VARCHAR2(1) := 'T';
l_api_version_number NUMBER :=1.0;
l_return_status VARCHAR2(1);
l_msg_count NUMBER;
l_msg_data VARCHAR2(2000);
-- Variables used specifically in error message retrieval
l_encoded VARCHAR2(1) := 'F';
l_data VARCHAR2(2000);
l_msg_index NUMBER;
l_msg_index_out NUMBER;
-- Variables needed for Oracle Project specific parameters
-- Input variables
l_pm_product_code VARCHAR2(30);
l_project_in pa_project_pub.project_in_rec_type;
l_key_members pa_project_pub.project_role_tbl_type;
l_class_categories pa_project_pub.class_category_tbl_type;
l_tasks_in pa_project_pub.task_in_tbl_type;
-- Record variables for loading table variables above
l_key_member_rec pa_project_pub.project_role_rec_type;
l_class_category_rec pa_project_pub.class_category_rec_type;
l_task_rec pa_project_pub.task_in_rec_type;
-- Output variables
l_workflow_started VARCHAR2(100);
l_project_out pa_project_pub.project_out_rec_type;
l_tasks_out pa_project_pub.task_out_tbl_type;
-- Exception to call messag handlers if API returns an error.
API_ERROR EXCEPTION;
BEGIN
-- Initialize the session with my user id and Projects, Vision Serves (USA0
-- responsibility:
select user_id into l_user_id
from fnd_user
where user_name = 'SSHAH';
select responsibility_id into l_responsibility_id
from fnd_responsibility_tl
where responsibility_name = 'Projects Implementation Superuser';
pa_interface_utils_pub.set_global_info(
p_api_version_number => l_api_version_number,
p_responsibility_id => l_responsibility_id,
p_user_id => l_user_id,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status);
if l_return_status != 'S' then
raise API_ERROR;
end if;
-- Provide values for input variables
-- L_PM_PRODUCT_CODE: These are stored in pa_lookups and can be defined
-- by the user. In this case we select a pre-defined one.
select lookup_code into l_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Conversion';
-- L_PROJECT_IN: We have to provide values for all required elements
-- of this record (see p 5-13, 5-14 for the definition of the record).
-- Customers will normally select this information from some external
-- source
l_project_in.pm_project_reference := 'AGL-AMG Project &no';
l_project_in.project_name := 'AGL-AMG Project &no';
l_project_in.created_from_project_id := 1;
l_project_in.carrying_out_organization_id := 2864; /*Cons. West*/
l_project_in.project_status_code := 'UNAPPROVED';
l_project_in.start_date := '01-JAN-11';
l_project_in.completion_date := '31-DEC-11';
l_project_in.description := 'Trying Hard';
l_project_in.project_relationship_code := 'Primary';
-- L_KEY_MEMBERS: To load the key member table we load individual
-- key member records and assign them to the key member table. In
-- the example below I am selecting all of the key member setup
-- from an existing project with 4 key members ('EE-Proj-01'):
for km in get_key_members loop
-- Get the next record and load into key members record:
l_key_member_rec.person_id := km.person_id;
l_key_member_rec.project_role_type := km.project_role_type;
-- Assign this record to the table (array)
l_key_members(km.rownum) := l_key_member_rec;
end loop;
-- L_CLASS_CATEGORIES: commented out below should fix the error we get
-- because the template does not have an assigment for the mandatory class
-- 'BAS Test'
l_class_category_rec.class_category := 'Product';
l_class_category_rec.class_code := 'Non-classified';
-- Assign the record to the table (array)
l_class_categories(1) := l_class_category_rec;
-- L_TASKS_IN: We will load in a single task and a subtask providing only
-- the basic fields (see pp. 5-16,5-17,5-18 for the definition of
-- the task record)
l_task_rec.pm_task_reference := '1';
l_task_rec.pa_task_number := '1';
l_task_rec.task_name := 'Construction';
l_task_rec.pm_parent_task_reference := '' ;
l_task_rec.task_description := 'Plant function';
-- Assign the top task to the table.
l_taskS_in(1) := l_task_rec;
-- Assign values for the sub task
l_task_rec.pm_task_reference := '1.1';
l_task_rec.pa_task_number := '1.1';
l_task_rec.task_name := 'Brick laying';
l_task_rec.pm_parent_task_reference := '1' ;
l_task_rec.task_description := 'Plant building';
-- Assign the subtask to the task table.
l_tasks_in(2) := l_task_rec;
-- All inputs are assigned, so call the API:
pa_project_pub.create_project
(p_api_version_number => l_api_version_number,
p_commit => l_commit,
p_init_msg_list => l_init_msg_list,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status,
p_workflow_started => l_workflow_started,
p_pm_product_code => l_pm_product_code,
p_project_in => l_project_in,
p_project_out => l_project_out,
p_key_members => l_key_members,
p_class_categories => l_class_categories,
p_tasks_in => l_tasks_in,
p_tasks_out => l_tasks_out);
-- Check the return status, if it is not success, then raise message handling
-- exception.
IF l_return_status != 'S' THEN
dbms_output.put_line('Msg_count: '||to_char(l_msg_count));
dbms_output.put_line('Error: ret status: '||l_return_status);
RAISE API_ERROR;
END IF;
-- perform manual commit since p_commit was set to False.
COMMIT;
--HANDLE EXCEPTIONS
EXCEPTION
WHEN API_ERROR THEN
FOR i IN 1..l_msg_count LOOP
pa_interface_utils_pub.get_messages(
p_msg_count => l_msg_count,
p_encoded => l_encoded,
p_msg_index => i,
p_msg_data => l_msg_data,
p_data => l_data,
p_msg_index_out => l_msg_index_out);
dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
END LOOP;
rollback;
WHEN OTHERS THEN
dbms_output.put_line('Error: '||sqlerrm);
FOR i IN 1..l_msg_count LOOP
pa_interface_utils_pub.get_messages(
p_msg_count => l_msg_count,
p_encoded => l_encoded,
p_msg_index => i,
p_msg_data => l_msg_data,
p_data => l_data,
p_msg_index_out => l_msg_index_out);
dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
END LOOP;
rollback;
END;
===
Msg_count: 1
Error: ret status: E
ERROR: 1: Project: 'AGL-AMG Project 1123'
Source template ID is invalid.
PL/SQL procedure successfully completed.

I was using a custom Application, which had a id other then 275 (which belongs to Oracle projects)

Error while creating new user in Oracle 11i EBS

I am getting following error while creating new user. How solve this issue?
“Unable to load java class % specified profile option SIGNON_PASSWORD_CUSTOM. Please verify that the class exists and that it implements the java interface oracle.apps.fnd.security.PasswordValidation”.

Following is the text from Note for Custom Password Validation logic:
Customers who wish to use their own password validation logic may do
so by writing their own Java classes that implement the
oracle.apps.fnd.security.PasswordValidation Java interface. The
interface requires 3 methods to be implemented:
1) public boolean validate(String user, String password)
    - This method takes a username and password, and then returns true
or false, indicating whether the user's password is valid or invalid,
respectively.
2) public String getErrorStackMessageName()
    - This method returns the name of the message to display when the
user's password is deemed invalid (i.e., the validate() method returns
false).
3) public String getErrorStackApplicationName()
    - This method returns the application shortname for the
aforementioned error message.
After writing the Java class to perform customized password
validation, the customer must then set the value of the profile option
SIGNON_PASSWORD_CUSTOM to be the full name of the class. If, for
example, the name of the Java class is
oracle.apps.fnd.security.AppsPasswordValidation, then the value of the
SIGNON_PASSWORD_CUSTOM profile option must be
oracle.apps.fnd.security.AppsPasswordValidation. Note that AOL/J
will attempt to load this class dynamically. Hence it is necessary to
make the class accessible by AOL/J. This means that in Forms, the
class must first be loaded into the database using the loadjava
command.
You will need to apply the following patches for 11.5.1:
   1344802
   1363919
   1472974
   1351004
   1377615
You will need to apply the following patches for 11.5.2:
   1377615

Error while creating Business partner

Hello,
I am getting an error while creating a role in Business Partner (T.code BP). The error is given below:
Role 'contract partner' in IS-U not same as role from FS
Message no. E9450
Diagnosis
In IS-U or IS-T, you are not permitted to allocate the role Contract Partner and a role from Financial Services (role category begins with 'FL' or 'TR') to a business partner. This is due a conflict with regard to the corresponding customers
Procedure
Create another business partner as a duplicate.
Please assist.
Thanks & Regards,
Vineet

Hi,
The error prompts you that you can not create a business partner in financial roles (TR*, FL*) where a role of contract partner is already assigned to same partner.
Please refer SAP Note - 1123452 and 1564107.
Regards
Prasad AV

Error while creating a new connection in ODSM for OVD

Hi all,
I am getting the following error while creating a new connection in ODSM for OVD.
Error log:
[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by:
=======
java.lang.NoClassDefFoundError: Could not initialize class
com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub
at com.octetstring.vde.admin.services.client.ServerMgrServiceLocator.getVDEAdminService(ServerMgrServiceLocator.java:58)
at oracle.ldap.odsm.model.ovd.APServerProxy.connect(APServerProxy.java:248)
at oracle.ldap.odsm.model.ovd.APServerProxy.authenticateAs(APServerProxy.java:684)
at oracle.ldap.odsm.model.ovd.APServerProxy.authenticate(APServerProxy.java:286)
at oracle.ldap.odsm.model.ovd.APServerProxy.init(APServerProxy.java:216)
at oracle.ldap.odsm.model.ovd.APServerProxy.<init>(APServerProxy.java:198)
at oracle.ldap.odsm.model.ovd.OVDRoot.connectOVD(OVDRoot.java:185)
at oracle.ldap.odsm.ui.common.Connection.connect(Connection.java:120)
at oracle.ldap.odsm.ui.common.Visit.createConnection(Visit.java:663)
at oracle.ldap.odsm.ui.common.Login.saveChanges(Login.java:215)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(Unknown Source)
at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1245)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:812)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:292)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
... 28 more
How to resolve this issue.Pls suggest me.
Regards,
-Deena.

Hi Deena,
This error:
"[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub"
is known issue
Go to metalink, article: Unable To Connect To OVD 11g Webinterface Using ODSM. [ID 1282757.1]
You need to apply that patch.
I hope this helps,
Thiago Leoncio.

Error while creating a recipe in plm..

Hi every one,
System throughing below error while creating a recipe.
"Entries in status management Customizing are incorrect"
kindly suggest.
have a good day..
regards,
kirran

Hi Kirran,
Please see if you have defined a status scheme and assigned it to the recipe type. Before defining a status scheme, you must complete the one time IMG activity 'Collect Object Types and Assigned Attributes' under Recipe Development > Status Management. Then in the next node you define individual statuses and a scheme with transitions. For each status, you must define 'field value' for the field RCP_USAGE which is nothing but a value from Recipe Purposes customizing.
Hope this helps.
Regards,
Rajeev

Error while creating a PO

Hi all,
I have got an error while creating a PO with an Internal Order. I am trying to post this PO against an Internal Order. The error message says that:
User status BUDG is active (ORD 10034). When I click the perform assistant, it says that according to this status, transaction 'Material purchase order' is not allowed.
Can somebody plss help me in this regards, I will assign points.
Thank you,
Sony

What you enter in the Cost element master data is only for defaulting the cost center or order when you use that GL account.
When you see a message transction requires an account assignment, you can enter the relevant cost center for which the cost is incurred.
For your information, If an order has been marked as statistical, you can find it in KO02 change order > Control data. there may be check box saying statistical. If it is not available, then, you can't make it statistical until, you make that field available for change for the order type. Usually orders of a particular type can be made as statistical, by providing a model order to the order type. In the model order you specify that it will be statistical.

Errors while creating customers in CRM 5.0

Similar Messages

Maybe you are looking for