ERS invoice not showing in SUS

In ERP when MRRL is run for PO's which are for same vendors, it creates one invoice for these  PO's. In sus when we look it is not showing these invoices as it has two Po's linked to it. what needs to be done in sus to correct this problem.
Edited by: nancy on Mar 17, 2009 8:41 AM

Hi,
Check Idoc IDOC "GSVERF01" is used for this purpose.
ERS Invoice from ECC is transfered to SUS system for display purpose to Vendor in MM-SUS scenario.
Thanks
Zameer

Similar Messages

  • Mrp per unit filed in excise invoice not showing value

    Hi,
    in excise invoice print  mrp per unit value not showing, to find solution what process i need to follow
    please find attachment for screen shot.
    regards,
    sivakoti.

    Hi all
    i got solution from my issue , as above given MRP per unit value picking from MRP per case value,
    here if MRP per unit value is more than 3 digits(ex: 1000 rs/-) then value not appearing in excise invoice ,for this my ABAP r has done program variant changes for numeric length increased for MRP per unit field
    thank you to   G Lakshmipathi and Ashok Kumar Telugu for spending your valuable time on this issue .

  • INVOICE NOT SHOWING IN CUSTOMER A/C

    hi all,
    pl help me out on the issue...
    I had made two Sales order against which made the invoice .I had got the invoice number also,but when I am going in the ledger of customer it is not showing there.also,if  I checked this in VF03 it is showing does not exsist.
    Then from where I got the invoice number??
    second, when I process this in VF01 then system is allowing me to make the invoice again..

    Hi,
    Goto VOV7 T.Code,Select your item category.MAintain the the completion rule as "B".
    Save.
    Goto VA03,Enter your sales document number here.
    Click on document flow or press F5.
    Check whether the invoice is created or not.If it is created then check whether the accounting document is generated ornot.If it is not generated then release your invoice to ccounting using VF02 or VFX3 T.Code.
    If there is any error in this process then log will be created.Check the log.
    For your customer all the open invoices and cleared ones in FBL5n T.Code.
    Regards,
    Krishna.

  • Tax invoice not show in assignment field of billing doc & ref doc of FI doc

    Dear Gurues
    Does anyone know how to able to display Tax invoice numbering at the assignment field of Billing doc and reference doc header field in FI doc generated by posting billing doc. Also post through POS IDoc?
    I have change SD config to correct the existing non vat billing to be able to record vat billing.  The result seem ok when I enter regular billing, system generate FI doc with Psk01 customer, Psk50 Revenue acc, output tax.  This shows Tax invoice number at reference doc header and assignment field at output tax line item.  Assignment field of billing doc is also display.  
    But when entering to billing with a dummy article (same meaning as material master) that was set up to GL acc, I found that the FI doc after posting billing show a billing doc number instead of Tax invoice number at reference doc header field.  This result is same when post thru POS IDoc as well. (FI doc is Psk40 Cash on hand, Psk50 Revenue acc, output tax)
    Out put tax acc has sort key as 009 - external doc number
    Your suggestion is mostly appreciated.
    Yours sincerely,
    Kulsri K.

    OK I can clear it now.  Just set tax category to Dummy Article to be Full tax then Tax sequence number is running.

  • Old AP Invoices not showing up for a user

    Hello,
    Working on EBS:11.5.0 windows, the problem is that a specfic user can not see the old invoices while other users are able to see the old invoices. The problem has occurred yesterday, everything was working fine before that.
    Any help on this regard will be highly appreciated.
    Thank you,
    Adith

    1) Are both users who can / can not see the invoice using the same responsibility ?
    2) Any recent changes / patches moved aorund the time from which this problem is visible ?

  • Drag and relate filter on AP Invoices not showing post dates past Dec2010

    Hello experts,
    Using the following version: 2007A (8.00.178) SP:00, PL:44
    The customer is getting the following issue.
    In drag and relate bringing up AP Invoices, the latest AP invoice is for 21/01/2011. When the customer tries to filter by posting date, the drop down list of dates only goes down to 27/12/2010.
    Using drag and relate for other documents such as the credit notes this issue is not seen and the date goes into 2011.
    Can anyone tell me how I can solve this issue or if this is a bug with the version the customer is using ?
    Thank you
    Andy

    Hi Andy,
    It might be version related. Try on a high version. PL44 is too low.
    Check period indicator too.
    Thanks,
    Gordon

  • SD invoice not showing the Ecess and SEcess

    Hi SD consultants,
    I am executing a depot sale scenario.
    I craeted a SO, Delivery and billing in VF01. When i check the billing doc ina ccounting view it is not picking the ECess and SHEcess.
    Where as in SO i can see the ECess and SHEcss .
    Wht could the wrong.
    Also after invoice creation i am creating excise invoice in J1Ij and refering the factory invoice . I need to know is setoff will happen ( Monthly utilisation in depot level because we r charing ED from customer )
    Request all to reply
    Thanks
    A.Gururajan

    Hi
    Kindly check the belwo
    1. Check the coditio n records maintained for the condition types and the validity periods
    2. Ch3eck the pricing procedure in the billing document
    Regards
    Damu

  • Invoices not showing in VF24.

    Can someone help, I have creatyed 10 invoices this morning and they have been processed in vf04 without any errors.
    These need to go into an invoice list but when I check vf24 the invoices are not visbale.
    I have checked vf24 for all item but still the 10 today are still missing.
    any reason for this,
    regards

    HI,
    Did you make the configuration for the INVOICE LISTS ?
    Check the copy control settings from BILLING TO INVOICE LISTS  in VTFF.
    regards,
    santosh

  • Proforma Invoice not showing Field List Value

    I am setting up a Smartform for a Proforma Invoice and the problem its that in the main window I am trying to get the value for the delivery number for items (GS_IT_REFDLV-DELIV_NUMB) but it does not come up.
    It is already in Global Definitions: GS_IT_REFDLV-DELIV_NUMB type LBBIL_IT_REFDLV
    Does it requiere something special from copy control in VTFL?, I changed routine to #010 DlvRel pro forma itm , but now it says its not relevant for invoice when I try to create the proforma Invoice in VF01.
    Thank You,
    Regards,
    Carlos

    Since I copied the form there is some code already in the node of the Main window do I added this line under DATA:
    deliv_numb LIKE lbbil_it_refdlv-deliv_numb.
    But it also coming blank.
    If anyone has any idea I will appreciate it, Thanks.

  • Invoices not showing up for clearing with F-32

    Hi,
    For 2 customer accounts we have similar issues.
    Customer 1:
    FBL5N: 1 invoice and 1 payment received which perfectly match.
    F-32: only the payment is displayed, no trace of the invoice, unable to clear
    Customer 2:
    FBL5N: 4 invoices and 1 payment received which perfectly match.
    F-32: only the last 3 invoices and the payment are shown, no trace of the first invoice, unable to clear
    We have checked on the customer master data (company code), but couldn't find any differences with the customers for which clearing is working fine.
    Also checked the setup of the related provisioning accounts and they are set to Open Item Management.
    Could you please help us out or indicate what more we need to check?
    Thanks in advance!
    Best regards,
    Geert

    Hi Greet,
    It is clear from your message that the issue is due to base line date changes.
    The first thing is that I don't understand why base line dates were changed that many times. Even after receipt of the payment also dates were changed........just imagine the need for change.
    Then coming to the issue for customer 2 it is clear that the base line date:31/12/2009 is in future date, hence it won't appear in open item process.
    But in the first case on 29.09.2009: Baseline date from 17.03.2009 to 31.12.2009 then on
    28.10.2009: Baseline date from 31.12.2009 to 31.12.2008 were changed. In this case check in the accounting document and see which base line date is appearing. If the date is 31/12/2009, then it wont appear in f-32.
    If the doc date baseline date appears as 31/12/2008........we need to analyze further.
    Hope this will clarify you clearly.
    Regards,
    Dharani

  • ERS Invoice Error from MM to SUS

    Hi,
    I am getting the following error when posting Invoice from MM to SUS:
    I am getting this error in SUS client, we are on SRM550, SP10 and on idependent clients for SUS, EBP and MM.
    Error Message:
    An error occured within an XI interface: Exception occurredE:BBP_TAX:013 -Not possible to calculate tax I:R5:553 -'Different country' field contents deleted because identical to 'Country' I:R5:553 -'Different country' field contents deleted because identical to 'Country' E:BBP_TAX:005 -Error in parameter transfer E:BS:013 -System status INCM is active (SUS Invoice 5000000087) Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002;
    We tried with note No. 888952, but the error persists for Tax and parameter transfer. We need note or any further inputs to correct this errors in SUS. We are using Tax calculations from Backend.
    Your inputs will be highly appreciated.....
    Regards,
    Mohan

    Hi
    <u>Which SUS and R/3 versions are you using ?</u>
    <b>Please go through the links/pointers, which will definitely help -></b>
    Refer SAP OSS Note number 806361
    Re: invoice in sus
    ERS- Evaluated Receipt settlement
    R/3-XI-SUS
    Error Sending SRM PO Change to SUS-Different Country field contents deleted
    Purchase Order Response in SRM from R/3 through XI
    Automatic Entry of purchase order Response
    Enter a country for partner with type 'Sold-to Party'
    Re: SRM-XI-SUS
    Do let me know.
    Regards
    - Atul

  • SRM 7.0 - Unconfirmed PO limit items not showing up when creating Invoice

    Hi Guys,
    For PO standard items, when creating an invoice and is unconfirmed, these items still show up in the invoice screen and the invoice gets created with the status 'Waiting for preceding document'. For unconfirmed limit items, these items do not show up at all in the creation of the invoice and displays an error. My question is how will I make the unconfirmed limit items scenario work just like the standard items scenario whereby instead of the unconfirmed limit items not showing up and generating an error, they will show up and have the invoice created with the status 'Waiting for preceding document'?
    Thanks in advance!

    Is this thread still valid? If not, please close the thread.
    If so, as no response has been submitted, please rephrase your question and/or provide further information to describe your requirement.
    Thanks
    Jason
    SDN SRM Moderator Team

  • Sales Invoice no & date is not showing in J2I6 Report

    Hello Experts,
    I am running J2I6 report for RG23A PART2 register. In this report Duty like  BED, Ecess & HEcess is showing in all case but for credit utilization i.e. sales part INVOICE no & Invoice no is not showing in Report.We have applied Enhancement pack(EHP 3) before some days. Due to this it can be a problem?
    Can anyone help me solved the problem.
    Regards,
    Piyush

    Try to create the same report manually by adding each column and run the report and then go for another column.
    This might narrow down to issue.
    or else get the sql query and work on where clause condition first to see the reason.
    if helps mark
    ~ http://cool-bi.com

  • Input Excise SHECess not showing in MIGO & Excise Invoice posting, where I made a mistake ?

    Input Excise SHECess not showing in MIGO & Excise Invoice posting, where I made a mistake ?
    1.At the Time of MIGO,In Excise Invoice tab SECess Hide in reight side of the Screen
    2. At the time of J1IEX, Complete Input Excise SECess Line item is not appere in screen
    Please give the solution
    Regards
    Maran

    Hi,
    Please check following :
    1. Whether the AT1 indicator is active for Excise Registration number under CIN customizing
    Path
    IMG --> Logistics - General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Excise Registrations
    2. Whether the AT1 condition is maintained in Maintain Excise Defaults against tax procedure
    Path
    IMG --> Logistics - General --> Tax on Goods Movements --> India --> Basic Settings --> Determination of Excise Duty --> Maintain Excise Defaults
    3. Whether the AT1 condition is maintained in Specify Excise Accounts per Excise Transaction against excise transaction type
    Path
    IMG --> Logistics - General --> Tax on Goods Movements --> India --> Account Determination --> Specify Excise Accounts per Excise Transaction
    4. Whether the AT1 G/L account is maintained in Specify G/L Accounts per Excise Transaction
    Path
    IMG --> Logistics - General --> Tax on Goods Movements --> India --> Account Determination --> Specify G/L Accounts per Excise Transaction
    5. Check whether in condition for AT1 is maintained in FV11.
    6. Check whether AT1 setoff percentage is maintained (this is applicable only in case you maintain setoff conditions).
    7. Check whether AT1 percentage is maintained in conditions tab of Purchase Order.
    8. Check whether tax code is maintained in FV11 for AT1 condition maintained.
    Please check and revert in  case of any clarifications.
    Regards,
    Tejas

  • I have an invoice that I paid to use photoshop and now it is asking for serial number however it does not show a serial number when I log in

    I have an invoice that I paid to use photoshop and now it is asking for serial number however it does not show a serial number when I log in

    Please then use your web Browser  address http://www.adobe.com/  and sign in with your Adobe User ID and Password to your account the has your Subscription and use https://www.adobe.com/account/my-products-services.html capture the page which shows you have a subscription like I showed you I have.
    Open Adobe Creative Cloud desktop application use the APP tab and capture that scree to show Photoshop is installed and up to date like I did. Capture that screen. Show us you have installed Photoshop and its up to date.
    Open Photoshop and use menu Help it should show tha its activated because there will be a menu item Sign Out. If it is Sign In, Sign in  using the account that has the subscription the one you used above to Activate Photoshop.

Maybe you are looking for