ESA: outbound messages

Hello,
We've deployed ESA in out customer network.
All incomming connection comes to ESA, ESA queries LDAP (Route Query) and reroutes messages to specific servers (mailhost attribute).
In our SMTP Routes no entries.
Incomming messages works fine.
But outgoing not. Problem is that we need t send all outgoing messages to specific relay. We cannot use DNS.
So when i add smtp route (All Other Domains) i got situation when all incomming messages goes to the server specified in SMTP Route. However in message tracking i see that ESA got mailhost attribute from LDAP.
Who can explain, please?

Hi Sergey,
I think the two key points are highlighted/underlined below. I took this information from the Advance Guide.
https://www.cisco.com/en/US/docs/security/esa/esa7.6/ESA_7.6_AdvancedGuide.pdf
SMTP Routes Overview
The SMTP Routes table is read from the top down for every email delivery.
Otherwise, the system performs a regular MX lookup on the domain of the Envelope Recipient.
Default SMTP Route
You can also define a default SMTP route with the special keyword ALL. If a domain does not match a previous mapping in the SMTP Routes list, it defaults to being redirected to the MX host specified by the ALL entry
HTH,
Luis Silva
"If you need PDI (Planning, Design, Implement) assistance feel free to reach us"
http://www.cisco.com/web/partners/tools/pdihd.html

Similar Messages

Not working: the creation of an outbound message WMMBXY after posting of GR

Hello all,
I understand by now that the message type WMMBXY is initially an inbound only type.
The requirment I'm struggling with howvever wants to send an outbound message containing approximate the same info as WMMBYX the moment after a goods receipt is posted via MB02.
Therefore I created a new FM with the code to populate te idoc-structure WMMBID02. I gave it a process code via WE41.
Then I created a via WE20 a new outbound partner profile for Partner Type LI containing:
Message Type = WMMBXY
Partner Function = VN
Last I created a new output-type for EDI processing also with partner function VN.
For the check function of WE20 everyting is OK but when in MB02 I give in this Output-type I get the following warning and nothing is written in the NAST-table:
Partner 11420 does not exist for partner function LF
Message no. VN006
Diagnosis
Partner does not exist for the partner function selected for this
transaction.
Procedure
Check your input.
Is it not possible to send EDI messages for this kind of transaction? Are there any extra steps to take. From other postings on this site and others I understand that it must be possible but none touch this subject.
Many tnx and regards.
Bart.

i think you have to maintain the vendor/customer in your conditionrecords.
maybe you have customize your output-type to EDI (6).
Regards,
Gordon

PO outbound message control - Condition record / PO IDOC outbound user exit

Guys,
I have a system with PO outbound message control sending PO idocs to a unique plant that is set up as a customer in the partner profile. I am using a custom message type and RSEOUT00 to send my idocs with custom message type to this plant. This interface works fine. Now my requirement has changed. I need to send PO's to varying plants (depending on the plant in PO item- all items on my POs belong to same plant).
I noticed that i cannot create condition tables with PO type and Plant combination. (SAP Note 457497 .Q-34).
So I have decided to populate all my PO idocs with a generic receiving partner number '9999' and planning to change this somewhere in a user exit. I found an user exit which looks helpful.
EXIT_SAPLEINM_001 . FM
MM06E001 - Enhancement.
But somehow this exit is not triggered in during PO creation ME21N or change Me22N/Me22.
Is this because I am using a custom message type instead of standard message type ? (I still use the process codes Me10/Me11). Would this matter ? When should this user exit trigger (during creation of idocs in status 30 or when i run RSEOUT00 to sweep these idocs in status 30 to status 03) ? Any tips will be useful.
THanks.
Edited by: Shareen Hegde on Jul 21, 2008 10:13 PM

I found a OSS note -Note 457497 (Q&A # 34), which talks about the same . This was my assumption too. I was just confused because I saw plant(WERKS) in the field catalag of the access sequence.
I don't know what header field I can use to map the plant (I agree its a good idea to do this). But I have decided to do it another way. I will change the receiving partner on the control record depending on the plant in an user exit
- EXIT_SAPLEINM_001.
Thanks for your answer , Mahesh.

IDOC to File, variable substitution on outbound message XML tag attributes

My scenario is IDOC to FILE using XSL mappings.The target format is 2 XML tags (header, line) with the data stored in the attributes of each tag.
EG. <header attr1=one attr2=two attr3=three><line attr1=one attr2=two /></header>
The name of the file is dictated by an outbound attribute value in the header tag.
Can I get access to it the attribute in the target message in the CC_FILE using variable substution. ?
Currently I am not using content conversion as the XSL produces the file format needed, so I would pefer not to change the outbound message format/structure as this is going to an external party. I would prefer not to change the outbound format as this would need content conversion to strip the unwanted/information/processing node that is used for this purpose (file naming).
The name is a calculation of fields in the IDOC and is not explicit dictated (business logic is applied in the mapping to get the file name), so I would prefer to use the attribute of the resulting XML to keep the "business logic" in the XSL..
Things that cannot be changed.... 1. Must use XSL.for mapping. 2. Format cannot be changed of the outbound message. 3. Would prefer not to involved content conversion to keep formatting/node structure in the XSL mapping.
I have seen some reference to this being possible on the forums but nothing solid from what Ive read.
Something like var1 = payload:/Header/@attr1 in variable sub to get at the attribute
Any comments ?
Thanks in advance.
One final piece of info. its on a PI 7.1 system.

I think its best explained by my other thread Link:PI 7.1 Access to Dynamic Configuration through Java Class .
Thanks for the link I have already implemented based on that link but the one crucial difference is that it is implemented using a static method with no reference to the actual object (payload) for Dynamic configuration. It seems that without the 7.0 API which isnt available in 7.1 by default XSL with java extentions is limited to static methods. If you could read the other thread it certainly is possible I'm mistaken.

How to handle Changes in the Structure of Outbound Message.

Hi Experts,
I have a File2RFC scenario where the Outbound Message fields are (for e.g,) ID,Name,Loc, and Status. The structure of the xml file which needs to be picked by sender file adapter is changing each time based on the data entered by the user. I am sure this will fail in IS with RuntimeException in Message-Mapping transformation Error. Is there anyway to handle this kind of situation.
Message Sample- 1 (Message Processed successfully as it contains all the 4 fields...)
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Send xmlns:ns0="http://File2File">
   <root>
      <ID>1234</VesselID>
      <Name>PIUSER</VesselName>
      <Loc>System A</Type>
      <Status>1</Status>
   </root>
</ns0:MT_Send>
Message Sample- 2 (Message Failed with Runtime Mapping Exception in IS...'Loc' is missing)
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Send xmlns:ns0="http://File2File">
   <root>
      <ID>5678</VesselID>
      <Name>SAPUSER</VesselName>
      <Status>2</Status>
   </root>
</ns0:MT_Send>

Hi Ravi,
Thanks for the reply. I think changing the cardinality will not solve this issue. Because the file which is being picked by Sender file Adapter is changing its structure everytime based upon the values entired by the user.
For example - In Message 1 User has entered all the 4 values...so the structure is full.
Message Sample- 1 (Message Processed successfully as it contains all the 4 fields...)
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Send xmlns:ns0="http://File2File">
<root>
<ID>1234</VesselID>
<Name>PIUSER</VesselName>
<Loc>System A</Type>
<Status>1</Status>
</root>
</ns0:MT_Send>
In Message 2 - user has entered only 3 values...Though I have kept Loc as 0 to Unbound it fails as there is no tag <LOC></Loc> here.
Message Sample- 2 (Message Failed with Runtime Mapping Exception in IS...'Loc' Tag is missing)
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Send xmlns:ns0="http://File2File">
<root>
<ID>5678</VesselID>
<Name>SAPUSER</VesselName>
<Status>2</Status>
</root>
</ns0:MT_Send>

To Monitor inbound and outbound messages for ECC 6.0 business system

Hi Guys,
I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
XI server is on a different system.
I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
Thanks,
James.

James,
Go to SXMB_MONI in your sending system.
Here you will find a message ID fro your Message.
Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
Likeiwse it can be traced in the target system as well.
The basic point, The messages will have same Message Id on your R3 and on XI.
Regards
Bhavesh

AS2 adapter Outbound Message

Hi,
We have recently configured AS2 adapter for a party and started to test. We tried to send an outbound message to the party and found the following status in our seeburger monitor
It says "Initiaion to Backend Pending" with yellow state. Further the status description shows "AS2 Message created. Will try to send it now to partner and wait then for synchrone MDN.".
What should we do now? Is it the job of the receiving party to accept the message or do some thing at their side.
Regards
Krish

Hello all,
Note 1287778 solved the problem. Thanks for the reply.
Kind regards, Wilbert
Edited by: Wilbert Jeuken on Feb 24, 2010 9:43 AM

Receiver Determination for an Outbound Message to Multiple Receivers

Hi,
I have a scenario in which one Single Outbound Message needs to be sent to multiple receivers.
1. I have set up the Receiver Identification correctly i.e I can see the Receiers and their end points.
2. The problem is that when the first Message fails i.e due to Mapping error , the remaining Receivers do NOT get any messages.
3. So does XI does a Rollback of the whole set of receivers if first one fails?
Logically speaking the Message should go to other Receivers even if it fails for one of them.
I see a Red flag and then a Green flag in SXMB_MONI.
Please advice.
Thanks so much.
A

Hi,
I checked the trace log for Receiver Identification.
It says : Evaluating Condition //VBELN EQ '999999'.
INVALID RECEIVER : (rec name)
If the XPATH has turned false why does it still call the same Receiver ??
The value of VBELN is never 999999.
Can you please advice?
Thanks
Ashish

How do you set the original outbound message from MSG_WAIT_ACK to MSG_COMPLETE ?

We are using B2B & OSB to send out messages via eBMS protocol
So basically this are the two use cases
1) EBusiness Suite => B2B => OSB=> Customer for the outbound Shipment Notices
2) EBusiness Suite <= B2B <= OSB<= Customer for the Inbound acknowledgement
We are able to use standard B2B functionality to send out the messages using eBMS with https and client certificates
On the way back from the customer, we are using OSB that gets the raw data and the body gets sent to B2B
On the outgoing part a message gets created in B2B and is at MSG_WAIT_ACK
When the acknowledgement comes in, it comes as a seperate messgae in B2B and is at MSG_COMPLETE
How do you set the original outbound message from MSG_WAIT_ACK to MSG_COMPLETE?
We use JMS and have played around with jca.jms.JMSProperty.INREPLYTO_MSG_ID but that is not propagating to REFER_TO_MESSAGE_ID in B2B_BUSINESS_MESSAGE table
I tried using jca.jms.JMSProperty.CONVERSATION_ID as well but no luck
Any response is highly appreciated!

Are you asking about your own JavaMail code or about somebody else's web-based mail agent?
If it's the latter (which is what it sounds like) then you find the checkbox in the preferences configuration, or whatever they call it, which says "Include original message in reply", or something like that. If such a thing exists, that is. If you're thinking that the e-mail message controls how their code formats replies to it, that's not how it works.
Even Outlook lets you configure how replies are formatted, the only difference is that the Outlook default is to include the original message and your web-based agent's default is to not include it.

Outbound message ,http sender doubt

Hi
1. i had created a bo,attached it to outboundmessagetype
2.created a xai sender which references realtime http sender xaiclass
3.Now i created a servicescript which creates outbound message
4.created a uimap with a button and a textfield , onclick of that button i invoked that servicescript which should send the field value to the external webservice and send a response
To achieve this i had created a wsdl file which returns hello on receiving hi as a message
and i had added that wsdl hosted url in xai sender context fields
q1.
==>Now whats my doubt is how can i send the textbox value to the webservice and receive a response ,i know that by invoking a bo with
F1-OUTMSG MO i can send the outbound message but what should i write in bo and how can i map it to webservice?
q2.==>Do i need a xsd file ?
q3.==>is it compulsory for using xsl files in an external system for an http sender xaiclass?
q4.==>mapXML="businessObjectRequest" what does this actually mean,to which xml it maps to ?
these are the context values i used for my sender
http url1 :http://172.25.145.35:7001/test/testing
http header:Soapaction:receivecall
http method:post
httptimeout:45
character encoding:ISO-8859-1
any extra fields needed to be set?
help me guys..
Edited by: shanker on Apr 11, 2011 10:31 AM
Edited by: shanker on Apr 11, 2011 10:33 AM

One update
i am able to create a message but i am getting this error
Message from webpage
HTTP status code (500) was returned.
<?xml version='1.0' encoding='UTF-8'?><S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"><S:Body><S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope"><faultcode>S:Client</faultcode><faultstring>Couldn't create SOAP message due to exception: unexpected XML tag. expected: {http://schemas.xmlsoap.org/soap/envelope/}Envelope but found: {}sayHello</faultstring></S:Fault></S:Body></S:Envelope>....
i had not attached an xsl file to an external system either for an request or response ,is it mandatory?
what are the essential context fields for an httpsender?
these are what i used for my xai sender
http url1 :http://172.25.145.35:7001/test/testing
http header:Soapaction:receivecall
http method:post
httptimeout:45
character encoding:ISO-8859-1
plz help me

Question on - GWIA - Relay Host for outbound messages setting

We are being forced to use a "centralized" message relay host due to
State mandates. So . . . most everything is working except messages
sent to comcast.net. For some reason the GWIA is trying to communicate
directly with comcast.net (76.96.62.116). Here is my configuration
(all my GW systems are GW 7.0.3 lastest service patch, NW6.5SP8 server):
PO - on its own server
PO MTA - on its own server
GWIA MTA and GWIA - on their own server
GWIA is configured to use "Relay Host for outbound messages:" -
domain.com
The following is from my GWIA Log showing where I sent a message to my
comcast and hotmail e-mail accounts. For some reason, the GWIA is
trying to send my comcast.net addressed message directly to comcast
server instead of relaying thourgh my relay host. Is there some
setting or config file I need to look at to see how this is
happening?????
14:24:21 3EA MSG 626 File:
GWIA/VOL1:\MBCWEB\WPGATE\GWIA\wpcsout\gwi2e63\4\4C2DF69 5.000 Message
Id: (4C2DF68F.1FC:166:8140) Size: 0
14:24:21 3EA MSG 626 Sender: [email protected]
14:24:21 3EA MSG 626 Converting message to MIME:
MEDBD06/VOL1:\MBCWEB\WPGATE\GWIA\send\xc2df695.141
14:24:21 3EA MSG 626 Recipient: [email protected]
14:24:21 3EA MSG 626 Queuing message to daemon:
GWIA/VOL1:\MBCWEB\WPGATE\GWIA\send\sc2df695.141
14:24:21 3EA MSG 626 Converting message to MIME:
GWIA/VOL1:\MBCWEB\WPGATE\GWIA\send\xc2df695.142
14:24:21 3EA MSG 626 Recipient: [email protected]
14:24:21 3EA MSG 626 Queuing message to daemon:
GWIA/VOL1:\MBCWEB\WPGATE\GWIA\send\sc2df695.142
14:24:21 3E0 DMN: MSG 627 Sending file:
GWIA/VOL1:\MBCWEB\WPGATE\GWIA\send\pc2df695.141
14:24:21 3E0 DMN: MSG 627 Attempting to connect to 76.96.62.116
14:24:22 3FC DMN: MSG 628 Sending file:
GWIA/VOL1:\MBCWEB\WPGATE\GWIA\send\pc2df695.142
14:24:22 3FC DMN: MSG 628 Attempting to connect to domain.com
14:24:22 3FC DMN: MSG 628 Connected to XXX.XX.XXX.XX
14:24:22 3FC DMN: MSG 628 Transferred
14:24:22 3FC DMN: MSG 628 SMTP session ended: [XXX.XX.XXX.XX]
(domain.com)

Chris,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Outbound messages are being sent to Outbox

In the last couple of days Mail is sending any outbound message to the Outbox. When it does this I get the following: Cannot send mail. A copy has been placed in your Outbox? The recipient (lists email address) was rejected by the server. There is an OK tap at the bottom.
I am on a different Wi-Fi network than at home. I have not had problems like this on the home Wi-Fi network.
Retiredmac

This could be a situation with the Wi-Fi network you are connecting to when you get the message. Or it might be something in your iPad.
Reboot your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem. If not then I suspect something in the particular Wi-Fi network.

Monitoring of inbound and outbound messages for business system ECC 6.0

Hi Guys,
I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
XI server is on a different system.
I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
Thanks,
James.

James,
Go to SXMB_MONI in your sending system.
Here you will find a message ID fro your Message.
Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
Likeiwse it can be traced in the target system as well.
The basic point, The messages will have same Message Id on your R3 and on XI.
Regards
Bhavesh

Outbound message in Near Real Time - in CC&B V2.1

Greetings,
In CC&B V2.1, I am trying to send an outbound message from CC&B to an external Webservice.
The process was as follows:
1-Configured a Business object based on F1-OUTMSG Maintenance Object
2-Create a new outbound message type based on the previous BO
3-Created a new XAI sender with based on "OUTMSGSNDR" XAI class with HTTP URL pointing to the external webservice
4-Created a new external system and linked the outbound message type to it.
5-Created a plug-in script to insert a record into table F1_OUTMSG after forming the XML message
Now when the records are inserted into F1_OUTMSG, the default XAI Receiver (F1OUTNNDMSG based on XAILOCAL executer ID) shipped with the system is failing with a "Null pointer exception".
I am supposing when a record is inserted into table F1_OUTMSG with Pending status, the receiver will pick it and send it to sender specified in the external system configuration.
Where did I go wrong in the above process?
Thanks in advance
AK

Hi,
Thanks for the response. I applied the change, but still same error happens when I refresh the Receiver.
Where could other configuration error be?
Thanks

Changing the default parameters in outbound message

How to change the outbound default settings in OracleB2b.
I am posting a message with the ebms identifier=123456789,but my outbound message contains ebms identifier="Acme"(party name) coz Party Name is the default value.
Regards,
Deepthi
Edited by: user12396907 on Dec 30, 2009 2:14 AM

Hi Deepthi,
Please do the following to add a custom Identifier,
Administration -> Types -> add custom Type(123456789) and use the same in profile and agreement.
After adding the custom type of "urn:oasis:names:tc:ebxml-msg:actor:nextMSH" and configure the same partner profile with new custom type the value of "123456789"
and ebMS header will be some thing like below,
+<eb:From><eb:PartyId eb:type="Name">Acme</eb:PartyId><eb:PartyId eb:type="urn:oasis:names:tc:ebxml-msg:actor:nextMSH">123456789</eb:PartyId><eb:Role>Buyer</eb:Role></eb:From>+
I hope this might resolve your issue. Please let me know.
Regards
Nandagopal

ESA: outbound messages

Similar Messages

Maybe you are looking for